(kicad_symbol_lib
	(version 20251024)
	(generator "adom_symbol_creator")
	(generator_version "10.0")
	(symbol "AP62300TWU-7"
		(exclude_from_sim no)
		(in_bom yes)
		(on_board yes)
		(in_pos_files yes)
		(duplicate_pin_numbers_are_jumpers no)
		(property "Reference" "U"
			(at 0 11.43 0)
			(effects (font (size 1.27 1.27)))
		)
		(property "Value" "AP62300TWU-7"
			(at 0 -11.43 0)
			(effects (font (size 1.27 1.27)))
		)
		(property "Footprint" "AP62300TWU-7:SOT95P280X100-6N"
			(at 0 0 0)
			(hide yes)
			(effects (font (size 1.27 1.27)))
		)
		(property "Datasheet" "https://www.diodes.com/assets/Datasheets/AP62300_AP62301_AP62300T.pdf"
			(at 0 0 0)
			(hide yes)
			(effects (font (size 1.27 1.27)))
		)
		(property "Description" "Diodes Incorporated AP62300T 3 A synchronous buck converter, 4.2 to 18 V input, 0.8 to 7 V output, COT control, 0.763 V feedback reference, 155 uA quiescent current with PFM at light load, 750 kHz typical, integrated 75 mOhm high-side and 45 mOhm low-side MOSFETs, 6-pin TSOT-26"
			(at 0 0 0)
			(hide yes)
			(effects (font (size 1.27 1.27)))
		)
		(property "ki_keywords" "buck converter step-down switching regulator DC-DC synchronous COT PFM 3A AP62300 AP62300T TSOT26 point of load"
			(at 0 0 0)
			(hide yes)
			(effects (font (size 1.27 1.27)))
		)
		(symbol "AP62300TWU-7_1_1"
			(rectangle
				(start -8.89 8.89)
				(end 8.89 -8.89)
				(stroke (width 0.254) (type default))
				(fill (type background))
			)
			(text "3A SYNC BUCK"
				(at 0 7.62 0)
				(effects (font (size 1.27 1.27) (bold yes)))
			)
			(text "4.2-18 V in - 750 kHz"
				(at 0 -7.62 0)
				(effects (font (size 1.016 1.016) (italic yes)))
			)
			(pin power_in line
				(at -11.43 5.08 0)
				(length 2.54)
				(name "VIN" (effects (font (size 1.27 1.27))))
				(number "3" (effects (font (size 1.27 1.27))))
			)
			(pin input line
				(at -11.43 2.54 0)
				(length 2.54)
				(name "EN" (effects (font (size 1.27 1.27))))
				(number "5" (effects (font (size 1.27 1.27))))
			)
			(pin power_in line
				(at -11.43 -5.08 0)
				(length 2.54)
				(name "GND" (effects (font (size 1.27 1.27))))
				(number "1" (effects (font (size 1.27 1.27))))
			)
			(pin power_out line
				(at 11.43 5.08 180)
				(length 2.54)
				(name "SW" (effects (font (size 1.27 1.27))))
				(number "2" (effects (font (size 1.27 1.27))))
			)
			(pin passive line
				(at 11.43 2.54 180)
				(length 2.54)
				(name "BST" (effects (font (size 1.27 1.27))))
				(number "6" (effects (font (size 1.27 1.27))))
			)
			(pin input line
				(at 11.43 -5.08 180)
				(length 2.54)
				(name "FB" (effects (font (size 1.27 1.27))))
				(number "4" (effects (font (size 1.27 1.27))))
			)
		)
	)
)