component
XT2052Y2ASR-G
Public Made by Adomby adom
NATLINEAR Battery Management, SOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -40,6 +40,20 @@ XT2052Y2ASR-G from NATLINEAR, in a SOP-8-EP. Pinout and pin descriptions extract - Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm` - 3D model: SOP-8-EP (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`xt2052y2asr-g.step`](xt2052y2asr-g.step) | 193 KB | You want the bare part, or you mark your own boards. |+| [`xt2052y2asr-g-etched.step`](xt2052y2asr-g-etched.step) | 2.2 MB | You want the part with `XT2052Y2ASR-G` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 560 faces against 63 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "xt2052y2asr-g",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "NATLINEAR Battery Management, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+11−8@@ -4,7 +4,7 @@ "slug": "xt2052y2asr-g", "title": "XT2052Y2ASR-G", "brief": "NATLINEAR Battery Management, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -40,7 +40,7 @@ "number": "2", "name": "ISET", "type": "input",- "description": "Charge-current program, monitor and shutdown pin. Charge current is set by a 1% resistor to GND: IBAT = (VISET/RISET) \u00d7 1000. In constant-current mode VISET \u2248 1.0V. Pulling ISET above 1.21V (via a 3\u00b5A internal pull-up when RISET is disconnected) puts the charger into shutdown (Icc drops to ~25\u00b5A); clamp voltage \u2248 2.4V. Reconnecting RISET to GND resumes normal operation."+ "description": "Charge-current program, monitor and shutdown pin. Charge current is set by a 1% resistor to GND: IBAT = (VISET/RISET) × 1000. In constant-current mode VISET ≈ 1.0V. Pulling ISET above 1.21V (via a 3µA internal pull-up when RISET is disconnected) puts the charger into shutdown (Icc drops to ~25µA); clamp voltage ≈ 2.4V. Reconnecting RISET to GND resumes normal operation." }, { "number": "3",@@ -52,25 +52,25 @@ "number": "4", "name": "VIN", "type": "power_in",- "description": "Positive supply input, 4.25V-6.5V operating (absolute max 7V; OVP trips above 6.8V). Requires at least a 1\u00b5F bypass capacitor. When VIN falls to within 30mV of VBAT the charger stops and BAT-pin drain drops below 0.1\u00b5A."+ "description": "Positive supply input, 4.25V-6.5V operating (absolute max 7V; OVP trips above 6.8V). Requires at least a 1µF bypass capacitor. When VIN falls to within 30mV of VBAT the charger stops and BAT-pin drain drops below 0.1µA." }, { "number": "5", "name": "VBAT", "type": "power_out",- "description": "Battery connection to the single-cell Li-ion pack positive terminal. Regulated float voltage 4.2V (\u00b11%). When charging is complete and VIN is present, BAT draws ~2\u00b5A; if VIN is removed BAT draws <0.1\u00b5A (reverse-blocked). A \u22654.7\u00b5F capacitor on this pin is required for stable operation and no-battery detection."+ "description": "Battery connection to the single-cell Li-ion pack positive terminal. Regulated float voltage 4.2V (±1%). When charging is complete and VIN is present, BAT draws ~2µA; if VIN is removed BAT draws <0.1µA (reverse-blocked). A ≥4.7µF capacitor on this pin is required for stable operation and no-battery detection." }, { "number": "6", "name": "DONE", "type": "output",- "description": "Open-drain charge-complete status output. Pulled low by an internal NMOS when the charge cycle finishes (VOL \u2248 0.35V at 5mA); high-impedance otherwise. Can directly drive an LED or a microcontroller input."+ "description": "Open-drain charge-complete status output. Pulled low by an internal NMOS when the charge cycle finishes (VOL ≈ 0.35V at 5mA); high-impedance otherwise. Can directly drive an LED or a microcontroller input." }, { "number": "7", "name": "CHRG", "type": "output",- "description": "Open-drain charge-in-progress status output. Pulled low by an internal NMOS while the battery is being charged (VOL \u2248 0.35V at 5mA); high-impedance otherwise. Pulses at ~2Hz (with 4.7\u00b5F on BAT) to indicate the no-battery condition."+ "description": "Open-drain charge-in-progress status output. Pulled low by an internal NMOS while the battery is being charged (VOL ≈ 0.35V at 5mA); high-impedance otherwise. Pulses at ~2Hz (with 4.7µF on BAT) to indicate the no-battery condition." }, { "number": "8",@@ -157,6 +157,9 @@ "docs/hero.png", "docs/xt2052y2asr-g-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]+ "viewers/footprint.html",+ "pads.json"+ ],+ "description": "NATLINEAR Battery Management, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "visibility": "public" }