← Commit history

Initial commit: component/xr21b1411il16tr-f

Ray ·00c7589827 ·
2 files changed +251
README.mdadded+53
@@ -0,0 +1,53 @@+# XR21B1411IL16TR-F++**MaxLinear** · USB Converters · QFN-16-EP(3x3)++XR21B1411IL16TR-F from MaxLinear, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | LOWPOWER | output | Asserted when unsafe to draw current from VBUS per Configuration Descriptor; default active low polarity (programmable via OTP). |+| 2 | NC | unconnected | No connection. |+| 3 | GPIO5/RTS#/RS485 | bidirectional | Configurable GPIO or UART RTS# output (active low) or auto RS-485 half-duplex control with programmable internal pull-up/pull-down. |+| 4 | GPIO4/CTS# | bidirectional | Configurable GPIO or UART CTS# input (active low) for hardware flow control with programmable internal pull-up/pull-down. |+| 5 | GPIO3/DTR# | bidirectional | Configurable GPIO or UART DTR# output (active low) for hardware flow control with programmable internal pull-up/pull-down. |+| 6 | GPIO2/DSR# | bidirectional | Configurable GPIO or UART DSR# input (active low) for hardware flow control with programmable internal pull-up/pull-down. |+| 7 | GPIO1/CD# | bidirectional | Configurable GPIO or UART CD# input (active low) with programmable internal pull-up/pull-down. |+| 8 | GPIO0/RI#/RWK# | bidirectional | Configurable GPIO or UART RI# input (active low) or Remote Wakeup input with programmable internal pull-up/pull-down. |+| 9 | TX | output | UART Transmit Data output. |+| 10 | RX | input | UART Receive Data input with programmable internal pull-up/pull-down resistor; pull-up disabled without valid VIO_REF voltage. |+| 11 | VBUS_SENSE | input | VBUS Sense input to disable USBD+ pull-up in self-powered mode; should be tied to defined state in bus-powered mode. |+| 12 | VIO_REF | power_in | Reference voltage for I/O signal levels with operating range +1.6V to +3.6V. |+| 13 | GND | power_in | Power supply common (ground). |+| 14 | USBD- | bidirectional | USB differential data negative input with ±15 kV HBM ESD protection per USB 2.0 specification. |+| 15 | USBD+ | bidirectional | USB differential data positive input with internal pull-up resistor and ±15 kV HBM ESD protection per USB 2.0 specification. |+| 16 | VCC | power_in | 5V power supply with input voltage range +4.4V to +5.25V. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MaxLinear |+| Package | QFN-16-EP(3x3) |+| Category | Interface |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `XR21B1411IL16TR-F`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `xr21b1411il16tr-f-etched.step` / `xr21b1411il16tr-f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xr21b1411il16tr-f.step` / `xr21b1411il16tr-f.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MaxLinear datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913479735005184) (31 pp, sha256 `2348f9f0dde10db6`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/xr21b1411il16tr-f-datasheet.pdf)
page.jsonadded+198
@@ -0,0 +1,198 @@+{+  "slug": "xr21b1411il16tr-f",+  "version": "0.1.0",+  "type": "component",+  "description": "MaxLinear USB Converters, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "xr21b1411il16tr-f",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "xr21b1411il16tr-f.kicad_sym",+    "xr21b1411il16tr-f.kicad_mod",+    "xr21b1411il16tr-f.glb",+    "xr21b1411il16tr-f.step",+    "xr21b1411il16tr-f.lbr",+    "docs/hero.png",+    "docs/xr21b1411il16tr-f-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "XR21B1411IL16TR-F",+    "manufacturer": "MaxLinear",+    "package": "QFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Interface",+    "subcategory": "USB Converters",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913479735005184",+    "parts": {+      "symbol": "xr21b1411il16tr-f.kicad_sym",+      "footprint": "xr21b1411il16tr-f.kicad_mod",+      "model_3d": "xr21b1411il16tr-f-etched.glb",+      "model_3d_plain": "xr21b1411il16tr-f.glb",+      "model_3d_step": "xr21b1411il16tr-f-etched.step",+      "model_3d_step_plain": "xr21b1411il16tr-f.step",+      "lbr": "xr21b1411il16tr-f.lbr"+    },+    "distributor_links": {+      "lcsc": "C517976"+    },+    "pins": [+      {+        "number": "1",+        "name": "LOWPOWER",+        "type": "output",+        "description": "Asserted when unsafe to draw current from VBUS per Configuration Descriptor; default active low polarity (programmable via OTP)."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "3",+        "name": "GPIO5/RTS#/RS485",+        "type": "bidirectional",+        "description": "Configurable GPIO or UART RTS# output (active low) or auto RS-485 half-duplex control with programmable internal pull-up/pull-down."+      },+      {+        "number": "4",+        "name": "GPIO4/CTS#",+        "type": "bidirectional",+        "description": "Configurable GPIO or UART CTS# input (active low) for hardware flow control with programmable internal pull-up/pull-down."+      },+      {+        "number": "5",+        "name": "GPIO3/DTR#",+        "type": "bidirectional",+        "description": "Configurable GPIO or UART DTR# output (active low) for hardware flow control with programmable internal pull-up/pull-down."+      },+      {+        "number": "6",+        "name": "GPIO2/DSR#",+        "type": "bidirectional",+        "description": "Configurable GPIO or UART DSR# input (active low) for hardware flow control with programmable internal pull-up/pull-down."+      },+      {+        "number": "7",+        "name": "GPIO1/CD#",+        "type": "bidirectional",+        "description": "Configurable GPIO or UART CD# input (active low) with programmable internal pull-up/pull-down."+      },+      {+        "number": "8",+        "name": "GPIO0/RI#/RWK#",+        "type": "bidirectional",+        "description": "Configurable GPIO or UART RI# input (active low) or Remote Wakeup input with programmable internal pull-up/pull-down."+      },+      {+        "number": "9",+        "name": "TX",+        "type": "output",+        "description": "UART Transmit Data output."+      },+      {+        "number": "10",+        "name": "RX",+        "type": "input",+        "description": "UART Receive Data input with programmable internal pull-up/pull-down resistor; pull-up disabled without valid VIO_REF voltage."+      },+      {+        "number": "11",+        "name": "VBUS_SENSE",+        "type": "input",+        "description": "VBUS Sense input to disable USBD+ pull-up in self-powered mode; should be tied to defined state in bus-powered mode."+      },+      {+        "number": "12",+        "name": "VIO_REF",+        "type": "power_in",+        "description": "Reference voltage for I/O signal levels with operating range +1.6V to +3.6V."+      },+      {+        "number": "13",+        "name": "GND",+        "type": "power_in",+        "description": "Power supply common (ground)."+      },+      {+        "number": "14",+        "name": "USBD-",+        "type": "bidirectional",+        "description": "USB differential data negative input with ±15 kV HBM ESD protection per USB 2.0 specification."+      },+      {+        "number": "15",+        "name": "USBD+",+        "type": "bidirectional",+        "description": "USB differential data positive input with internal pull-up resistor and ±15 kV HBM ESD protection per USB 2.0 specification."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "5V power supply with input voltage range +4.4V to +5.25V."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 17 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 31,+        "cost_usd": 0.3538,+        "at": "2026-09-22T14:04:13"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913479735005184",+        "pages": 31,+        "sha256": "2348f9f0dde10db6",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file