component
XL9613
Public Made by Adomby adom
XLSEMI LED Drivers, TO-263-5L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -38,25 +38,25 @@ "number": "2", "name": "CS", "type": "input",- "description": "Output current sense input. The chip regulates the voltage on this pin to a 0.22 V reference (\u00b13%), setting LED current as IOUT = 0.22 V / RCS. Absolute maximum voltage on this pin is 7 V."+ "description": "Output current sense input. The chip regulates the voltage on this pin to a 0.22 V reference (±3%), setting LED current as IOUT = 0.22 V / RCS. Absolute maximum voltage on this pin is 7 V." }, { "number": "3", "name": "SW", "type": "output",- "description": "Power switch output - switching node of the internal synchronous buck converter. Connects to the external inductor. High-side RDS(ON) \u2248 270 m\u03a9, low-side RDS(ON) \u2248 255 m\u03a9, current limit \u2248 2.2 A. Also electrically connected to the TO263-5L metal tab."+ "description": "Power switch output - switching node of the internal synchronous buck converter. Connects to the external inductor. High-side RDS(ON) ≈ 270 mΩ, low-side RDS(ON) ≈ 255 mΩ, current limit ≈ 2.2 A. Also electrically connected to the TO263-5L metal tab." }, { "number": "4", "name": "VC", "type": "passive",- "description": "Internal voltage regulator bypass capacitor pin. A 1 \u00b5F ceramic capacitor must be connected between VIN and VC to decouple the internal LDO/bias supply."+ "description": "Internal voltage regulator bypass capacitor pin. A 1 µF ceramic capacitor must be connected between VIN and VC to decouple the internal LDO/bias supply." }, { "number": "5", "name": "VIN", "type": "power_in",- "description": "Power supply input, DC 5 V to 72 V (absolute max 90 V). An electrolytic bulk capacitor must be placed between VIN and GND to filter input noise; a typical 47 \u00b5F/100 V is used in the reference design."+ "description": "Power supply input, DC 5 V to 72 V (absolute max 90 V). An electrolytic bulk capacitor must be placed between VIN and GND to filter input noise; a typical 47 µF/100 V is used in the reference design." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/xl9613-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }