component
XL9535
Public Made by Adomby adom
XINLUDA I/O Expanders, TSSOP-24. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+212−8@@ -1,13 +1,222 @@ {+ "schema_version": 1,+ "type": "component", "slug": "xl9535",+ "title": "XL9535",+ "brief": "XINLUDA I/O Expanders, TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "XINLUDA I/O Expanders, TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "interface", "xl9535" ],+ "component": {+ "mpn": "XL9535",+ "manufacturer": "XINLUDA",+ "package": "TSSOP-24",+ "pin_count": 24,+ "category": "Interface",+ "subcategory": "I/O Expanders",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ba4da8ed434527fc8fc1e1909c81d240.pdf",+ "parts": {+ "symbol": "xl9535.kicad_sym",+ "footprint": "xl9535.kicad_mod",+ "model_3d": "xl9535.glb",+ "model_3d_step": "xl9535.step",+ "lbr": "xl9535.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "INT",+ "type": "output",+ "description": "Active-LOW open-drain interrupt output. Asserted when any input pin state differs from its corresponding Input Port register value. Requires an external pull-up resistor to Vcc; IOL = 3 mA at VOL = 0.4 V."+ },+ {+ "number": "2",+ "name": "A1",+ "type": "input",+ "description": "Hardware I2C slave-address select bit 1. Must be tied directly to Vcc or GND (never floating) and must not change while device is powered. Sets bit 2 of the 7-bit slave address (base 0x20)."+ },+ {+ "number": "3",+ "name": "A2",+ "type": "input",+ "description": "Hardware I2C slave-address select bit 2. Must be tied directly to Vcc or GND (never floating). Sets bit 3 of the 7-bit slave address (base 0x20)."+ },+ {+ "number": "4",+ "name": "P00",+ "type": "bidirectional",+ "description": "Port 0 bit 0. Push-pull GPIO, configured as input at power-on. Per-I/O limit 25 mA; VIH = 0.7xVcc, VIL = 0.3xVcc; IOL up to 25 mA, IOH up to -10 mA."+ },+ {+ "number": "5",+ "name": "P01",+ "type": "bidirectional",+ "description": "Port 0 bit 1. Push-pull GPIO, configured as input at power-on. Same drive limits as P00."+ },+ {+ "number": "6",+ "name": "P02",+ "type": "bidirectional",+ "description": "Port 0 bit 2. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "7",+ "name": "P03",+ "type": "bidirectional",+ "description": "Port 0 bit 3. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "8",+ "name": "P04",+ "type": "bidirectional",+ "description": "Port 0 bit 4. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "9",+ "name": "P05",+ "type": "bidirectional",+ "description": "Port 0 bit 5. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "10",+ "name": "P06",+ "type": "bidirectional",+ "description": "Port 0 bit 6. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "11",+ "name": "P07",+ "type": "bidirectional",+ "description": "Port 0 bit 7. Push-pull GPIO, configured as input at power-on. Total sourced current on P07-P00 must be limited to 80 mA."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Supply ground (0 V reference)."+ },+ {+ "number": "13",+ "name": "P10",+ "type": "bidirectional",+ "description": "Port 1 bit 0. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "14",+ "name": "P11",+ "type": "bidirectional",+ "description": "Port 1 bit 1. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "15",+ "name": "P12",+ "type": "bidirectional",+ "description": "Port 1 bit 2. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "16",+ "name": "P13",+ "type": "bidirectional",+ "description": "Port 1 bit 3. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "17",+ "name": "P14",+ "type": "bidirectional",+ "description": "Port 1 bit 4. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "18",+ "name": "P15",+ "type": "bidirectional",+ "description": "Port 1 bit 5. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "19",+ "name": "P16",+ "type": "bidirectional",+ "description": "Port 1 bit 6. Push-pull GPIO, configured as input at power-on."+ },+ {+ "number": "20",+ "name": "P17",+ "type": "bidirectional",+ "description": "Port 1 bit 7. Push-pull GPIO, configured as input at power-on. Total sourced current on P17-P10 must be limited to 80 mA."+ },+ {+ "number": "21",+ "name": "A0",+ "type": "input",+ "description": "Hardware I2C slave-address select bit 0. Must be tied directly to Vcc or GND (never floating). Sets bit 1 of the 7-bit slave address (base 0x20, giving 0x20..0x27)."+ },+ {+ "number": "22",+ "name": "SCL",+ "type": "input",+ "description": "I2C-bus serial clock input. Requires external pull-up to Vcc. Supports standard-mode (100 kHz) and fast-mode (400 kHz); VIH = 0.7xVcc, VIL = 0.3xVcc, 5 V tolerant."+ },+ {+ "number": "23",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C-bus serial data line (open-drain). Requires external pull-up to Vcc. IOL >= 3 mA at VOL = 0.4 V; 5 V tolerant."+ },+ {+ "number": "24",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage, 2.3 V to 5.5 V. Typical ICC = 135 uA (max 200 uA) at 5.5 V with fSCL = 100 kHz; standby current typ 0.25 uA."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/ba4da8ed434527fc8fc1e1909c81d240.pdf",+ "pages": 25,+ "sha256": "80ea36f92c4bf704",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 24,+ "described": 24,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "XINLUDA",+ "Package": "TSSOP-24",+ "Category": "Interface",+ "Pins": "24"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "xl9535"+ ],+ "discovery_pitch": "XL9535 (XINLUDA) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +234,5 @@ "docs/xl9535-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }