component
XL555
Public Made by Adomby adom
XINLUDA Timers / Clock Oscillators, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
xl555: backfill missing artifacts (etch, variants)
3 files changed
+22886−8
diff truncated
README.md+2@@ -28,6 +28,8 @@ XL555 from XINLUDA, in a SOP-8. Pinout and pin descriptions extracted from the m ## Ordering variants +Same part, different packaging or reel option.+ - `XL555` - `XL555XD555`
page.json+19−8@@ -40,19 +40,19 @@ "number": "2", "name": "TRIG", "type": "input",- "description": "Trigger input. Start of timing input; when TRIG falls below 1/2 CONT (\u22481/3 VDD) the internal flip-flop is set, driving OUT high and opening the DISCH transistor. Input current \u224810 pA typical."+ "description": "Trigger input. Start of timing input; when TRIG falls below 1/2 CONT (≈1/3 VDD) the internal flip-flop is set, driving OUT high and opening the DISCH transistor. Input current ≈10 pA typical." }, { "number": "3", "name": "OUT", "type": "output",- "description": "High-current timer output signal (rail-to-rail CMOS). Sink capability 100 mA (max), source \u224810 mA typical."+ "description": "High-current timer output signal (rail-to-rail CMOS). Sink capability 100 mA (max), source ≈10 mA typical." }, { "number": "4", "name": "RESET", "type": "input",- "description": "Active-low reset input. Overrides all other inputs: when driven low the flip-flop is reset, OUT goes low and DISCH is pulled low. Typical VRESET \u22481.1 V; tie to VDD if unused."+ "description": "Active-low reset input. Overrides all other inputs: when driven low the flip-flop is reset, OUT goes low and DISCH is pulled low. Typical VRESET ≈1.1 V; tie to VDD if unused." }, { "number": "5",@@ -64,19 +64,19 @@ "number": "6", "name": "THRES", "type": "input",- "description": "Threshold (end-of-timing) input. When THRES rises above CONT (\u22482/3 VDD) the flip-flop is reset, OUT goes low and DISCH is pulled low. Input current \u224810 pA typical."+ "description": "Threshold (end-of-timing) input. When THRES rises above CONT (≈2/3 VDD) the flip-flop is reset, OUT goes low and DISCH is pulled low. Input current ≈10 pA typical." }, { "number": "7", "name": "DISCH", "type": "output",- "description": "Discharge. Open-collector/open-drain output used to discharge the external timing capacitor. Saturation voltage \u224850 mV at 1 mA; leakage \u22481 nA typical."+ "description": "Discharge. Open-collector/open-drain output used to discharge the external timing capacitor. Saturation voltage ≈50 mV at 1 mA; leakage ≈1 nA typical." }, { "number": "8", "name": "VDD", "type": "power_in",- "description": "Positive supply, 2 V to 16 V (absolute max 18 V). Typical supply current 120 \u00b5A at VDD = 5 V."+ "description": "Positive supply, 2 V to 16 V (absolute max 18 V). Typical supply current 120 µA at VDD = 5 V." } ], "provenance": {@@ -150,9 +150,20 @@ "docs/hero.png", "docs/xl555-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "xl555-etched.step" ], "visibility": { "public": true- }+ },+ "variants": [+ {+ "mpn": "XL555",+ "kind": "packaging"+ },+ {+ "mpn": "XL555XD555",+ "kind": "packaging"+ }+ ] }
xl555-etched.stepadded+22865@@ -0,0 +1,28963 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-09-04T03:32:10',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('part','part','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,0.));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-07),#24,+ 'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('body','body','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#16694);+#37 = MANIFOLD_SOLID_BREP('',#38);+#38 = CLOSED_SHELL('',(#39,#156,#235,#538,#617,#696,#775,#1073,#1156,+ #2396,#2469,#5470,#5546,#5801,#5828,#5855,#5882,#5909,#5936,#5963,+ #5990,#6017,#6044,#6071,#6078,#6154,#6271,#6298,#6325,#6352,#6379,+ #6386,#6462,#6947,#6974,#7001,#7028,#7055,#7082,#7109,#7136,#7163,+ #7190,#7217,#7244,#7271,#7298,#7325,#7352,#7379,#7406,#7433,#7460,+ #7487,#7494,#7570,#8055,#8082,#8109,#8136,#8163,#8190,#8217,#8244,+ #8271,#8298,#8325,#8352,#8379,#8406,#8433,#8460,#8487,#8514,#8541,+ #8568,#8595,#8602,#8678,#9163,#9190,#9217,#9244,#9271,#9298,#9325,+ #9352,#9379,#9406,#9433,#9460,#9487,#9514,#9541,#9568,#9595,#9622,+ #9649,#9676,#9703,#9710,#9736,#9762,#9788,#9814,#9840,#9866,#9873,+ #10178,#10249,#10303,#10352,#10401,#10450,#10500,#10549,#10603,+ #10631,#10686,#10991,#11062,#11116,#11165,#11214,#11263,#11313,+ #11362,#11416,#11444,#11499,#11804,#11875,#11929,#11978,#12027,+ #12076,#12126,#12175,#12229,#12257,#12312,#12617,#12688,#12742,+ #12791,#12840,#12889,#12939,#12988,#13042,#13070,#13125,#13430,+ #13501,#13555,#13604,#13653,#13702,#13752,#13801,#13855,#13883,+ #13938,#14243,#14314,#14368,#14417,#14466,#14515,#14565,#14614,+ #14668,#14696,#14751,#15056,#15127,#15181,#15230,#15279,#15328,+ #15378,#15427,#15481,#15509,#15564,#15869,#15940,#15994,#16043,+ #16092,#16141,#16191,#16240,#16294,#16322,#16357,#16401,#16408,+ #16415,#16422,#16429,#16436,#16443,#16450,#16474,#16498,#16522,+ #16546,#16553,#16560,#16567,#16574,#16581,#16588,#16595,#16602,+ #16626,#16650,#16657,#16683));+#39 = ADVANCED_FACE('',(#40),#54,.F.);+#40 = FACE_BOUND('',#41,.F.);+#41 = EDGE_LOOP('',(#42,#76,#103,#131));+#42 = ORIENTED_EDGE('',*,*,#43,.T.);+#43 = EDGE_CURVE('',#44,#46,#48,.T.);+#44 = VERTEX_POINT('',#45);+#45 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#46 = VERTEX_POINT('',#47);+#47 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#48 = SURFACE_CURVE('',#49,(#53,#64),.PCURVE_S1.);+#49 = LINE('',#50,#51);+#50 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#51 = VECTOR('',#52,1.);+#52 = DIRECTION('',(1.,1.110223024625E-16,0.));+#53 = PCURVE('',#54,#59);+#54 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#55,#56)+ ,(#57,#58)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#55 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#56 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#57 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#58 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#59 = DEFINITIONAL_REPRESENTATION('',(#60),#63);+#60 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#61,#62),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#61 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#62 = CARTESIAN_POINT('',(3.55,2.72692595899E-17));+#63 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#64 = PCURVE('',#65,#70);+#65 = PLANE('',#66);+#66 = AXIS2_PLACEMENT_3D('',#67,#68,#69);+#67 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#68 = DIRECTION('',(0.,0.,1.));+#69 = DIRECTION('',(0.592513131498,-0.805560791625,0.));+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);+#71 = LINE('',#72,#73);+#72 = CARTESIAN_POINT('',(0.,0.));+#73 = VECTOR('',#74,1.);+#74 = DIRECTION('',(0.592513131498,0.805560791625));+#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#76 = ORIENTED_EDGE('',*,*,#77,.T.);+#77 = EDGE_CURVE('',#46,#78,#80,.T.);+#78 = VERTEX_POINT('',#79);+#79 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#80 = SURFACE_CURVE('',#81,(#84,#91),.PCURVE_S1.);+#81 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82,#83),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#82 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#83 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#84 = PCURVE('',#54,#85);+#85 = DEFINITIONAL_REPRESENTATION('',(#86),#90);+#86 = LINE('',#87,#88);+#87 = CARTESIAN_POINT('',(3.55,-1.047195745689E-16));+#88 = VECTOR('',#89,1.);+#89 = DIRECTION('',(0.,1.));+#90 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#91 = PCURVE('',#92,#97);+#92 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#93,#94)+ ,(#95,#96+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#93 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#94 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#95 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#96 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#97 = DEFINITIONAL_REPRESENTATION('',(#98),#102);+#98 = LINE('',#99,#100);+#99 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#100 = VECTOR('',#101,1.);+#101 = DIRECTION('',(1.762446947573E-16,1.));+#102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#103 = ORIENTED_EDGE('',*,*,#104,.F.);+#104 = EDGE_CURVE('',#105,#78,#107,.T.);+#105 = VERTEX_POINT('',#106);+#106 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#107 = SURFACE_CURVE('',#108,(#112,#119),.PCURVE_S1.);+#108 = LINE('',#109,#110);+#109 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#110 = VECTOR('',#111,1.);+#111 = DIRECTION('',(1.,1.110223024625E-16,0.));+#112 = PCURVE('',#54,#113);+#113 = DEFINITIONAL_REPRESENTATION('',(#114),#118);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(2.189308472908E-16,1.));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(1.,3.127388801761E-17));+#118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#119 = PCURVE('',#120,#125);+#120 = PLANE('',#121);+#121 = AXIS2_PLACEMENT_3D('',#122,#123,#124);+#122 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#123 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#124 = DIRECTION('',(1.,1.110223024625E-16,0.));+#125 = DEFINITIONAL_REPRESENTATION('',(#126),#130);+#126 = LINE('',#127,#128);+#127 = CARTESIAN_POINT('',(0.,-0.2));+#128 = VECTOR('',#129,1.);+#129 = DIRECTION('',(1.,0.));+#130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#131 = ORIENTED_EDGE('',*,*,#132,.F.);+#132 = EDGE_CURVE('',#44,#105,#133,.T.);+#133 = SURFACE_CURVE('',#134,(#137,#144),.PCURVE_S1.);+#134 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#136),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#135 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#136 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#137 = PCURVE('',#54,#138);+#138 = DEFINITIONAL_REPRESENTATION('',(#139),#143);+#139 = LINE('',#140,#141);+#140 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#141 = VECTOR('',#142,1.);+#142 = DIRECTION('',(1.022122767958E-16,1.));+#143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#144 = PCURVE('',#145,#150);+#145 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#146,#147)+ ,(#148,#149+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#146 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#147 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#148 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#149 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);+#151 = LINE('',#152,#153);+#152 = CARTESIAN_POINT('',(0.247487373415,3.834137462134E-17));+#153 = VECTOR('',#154,1.);+#154 = DIRECTION('',(-3.608224830032E-16,1.));+#155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#156 = ADVANCED_FACE('',(#157),#145,.F.);+#157 = FACE_BOUND('',#158,.F.);+#158 = EDGE_LOOP('',(#159,#181,#182,#210));+#159 = ORIENTED_EDGE('',*,*,#160,.T.);+#160 = EDGE_CURVE('',#161,#44,#163,.T.);+#161 = VERTEX_POINT('',#162);+#162 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#163 = SURFACE_CURVE('',#164,(#168,#174),.PCURVE_S1.);+#164 = LINE('',#165,#166);+#165 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#166 = VECTOR('',#167,1.);+#167 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#168 = PCURVE('',#145,#169);+#169 = DEFINITIONAL_REPRESENTATION('',(#170),#173);+#170 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#171,#172),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#171 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#172 = CARTESIAN_POINT('',(0.247487373415,4.809026249314E-18));+#173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#174 = PCURVE('',#65,#175);+#175 = DEFINITIONAL_REPRESENTATION('',(#176),#180);+#176 = LINE('',#177,#178);+#177 = CARTESIAN_POINT('',(2.505134554812E-02,-0.164393417553));+#178 = VECTOR('',#179,1.);+#179 = DIRECTION('',(-0.150647445192,0.98858755164));+#180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#181 = ORIENTED_EDGE('',*,*,#132,.T.);+#182 = ORIENTED_EDGE('',*,*,#183,.F.);+#183 = EDGE_CURVE('',#184,#105,#186,.T.);+#184 = VERTEX_POINT('',#185);+#185 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#186 = SURFACE_CURVE('',#187,(#191,#198),.PCURVE_S1.);+#187 = LINE('',#188,#189);+#188 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#189 = VECTOR('',#190,1.);+#190 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#191 = PCURVE('',#145,#192);+#192 = DEFINITIONAL_REPRESENTATION('',(#193),#197);+#193 = LINE('',#194,#195);+#194 = CARTESIAN_POINT('',(7.999472487695E-17,1.));+#195 = VECTOR('',#196,1.);+#196 = DIRECTION('',(1.,0.));+#197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#198 = PCURVE('',#199,#204);+#199 = PLANE('',#200);+#200 = AXIS2_PLACEMENT_3D('',#201,#202,#203);+#201 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#202 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#203 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#204 = DEFINITIONAL_REPRESENTATION('',(#205),#209);+#205 = LINE('',#206,#207);+#206 = CARTESIAN_POINT('',(0.,-0.2));+#207 = VECTOR('',#208,1.);+#208 = DIRECTION('',(1.,0.));+#209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#210 = ORIENTED_EDGE('',*,*,#211,.F.);+#211 = EDGE_CURVE('',#161,#184,#212,.T.);+#212 = SURFACE_CURVE('',#213,(#216,#223),.PCURVE_S1.);+#213 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#214,#215),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#214 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#215 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#216 = PCURVE('',#145,#217);+#217 = DEFINITIONAL_REPRESENTATION('',(#218),#222);+#218 = LINE('',#219,#220);+#219 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#220 = VECTOR('',#221,1.);+#221 = DIRECTION('',(-4.463333469861E-16,1.));+#222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#223 = PCURVE('',#224,#229);+#224 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#225,#226)+ ,(#227,#228+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#225 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#226 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#227 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#228 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#229 = DEFINITIONAL_REPRESENTATION('',(#230),#234);+#230 = LINE('',#231,#232);+#231 = CARTESIAN_POINT('',(4.55,-5.031297844791E-18));+#232 = VECTOR('',#233,1.);+#233 = DIRECTION('',(0.,1.));+#234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#235 = ADVANCED_FACE('',(#236),#224,.F.);+#236 = FACE_BOUND('',#237,.F.);+#237 = EDGE_LOOP('',(#238,#260,#261,#289,#317,#345,#373,#401,#429,#457,+ #485,#513));+#238 = ORIENTED_EDGE('',*,*,#239,.T.);+#239 = EDGE_CURVE('',#240,#161,#242,.T.);+#240 = VERTEX_POINT('',#241);+#241 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#242 = SURFACE_CURVE('',#243,(#247,#253),.PCURVE_S1.);+#243 = LINE('',#244,#245);+#244 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#245 = VECTOR('',#246,1.);+#246 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#247 = PCURVE('',#224,#248);+#248 = DEFINITIONAL_REPRESENTATION('',(#249),#252);+#249 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#250,#251),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#250 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#251 = CARTESIAN_POINT('',(4.55,1.070087642278E-16));+#252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#253 = PCURVE('',#65,#254);+#254 = DEFINITIONAL_REPRESENTATION('',(#255),#259);+#255 = LINE('',#256,#257);+#256 = CARTESIAN_POINT('',(3.597851433471,-2.792290641847));+#257 = VECTOR('',#258,1.);+#258 = DIRECTION('',(-0.805560791625,0.592513131498));+#259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#260 = ORIENTED_EDGE('',*,*,#211,.T.);+#261 = ORIENTED_EDGE('',*,*,#262,.F.);+#262 = EDGE_CURVE('',#263,#184,#265,.T.);+#263 = VERTEX_POINT('',#264);+#264 = CARTESIAN_POINT('',(-1.95,2.11,0.825));+#265 = SURFACE_CURVE('',#266,(#270,#277),.PCURVE_S1.);+#266 = LINE('',#267,#268);+#267 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#268 = VECTOR('',#269,1.);+#269 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#270 = PCURVE('',#224,#271);+#271 = DEFINITIONAL_REPRESENTATION('',(#272),#276);+#272 = LINE('',#273,#274);+#273 = CARTESIAN_POINT('',(8.881784197001E-16,1.));+#274 = VECTOR('',#275,1.);+#275 = DIRECTION('',(1.,1.345724878334E-15));+#276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#277 = PCURVE('',#278,#283);+#278 = PLANE('',#279);+#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282);+#280 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#281 = DIRECTION('',(1.,1.110223024625E-16,0.));+#282 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#283 = DEFINITIONAL_REPRESENTATION('',(#284),#288);+#284 = LINE('',#285,#286);+#285 = CARTESIAN_POINT('',(0.,-0.2));+#286 = VECTOR('',#287,1.);+#287 = DIRECTION('',(1.,0.));+#288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#289 = ORIENTED_EDGE('',*,*,#290,.F.);+#290 = EDGE_CURVE('',#291,#263,#293,.T.);+#291 = VERTEX_POINT('',#292);+#292 = CARTESIAN_POINT('',(-1.95,1.7,0.825));+#293 = SURFACE_CURVE('',#294,(#298,#305),.PCURVE_S1.);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#298 = PCURVE('',#224,#299);+#299 = DEFINITIONAL_REPRESENTATION('',(#300),#304);+#300 = LINE('',#301,#302);+#301 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#302 = VECTOR('',#303,1.);+#303 = DIRECTION('',(1.,5.415722071342E-16));+#304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#305 = PCURVE('',#306,#311);+#306 = PLANE('',#307);+#307 = AXIS2_PLACEMENT_3D('',#308,#309,#310);+#308 = CARTESIAN_POINT('',(-1.8,1.7,0.825));+#309 = DIRECTION('',(0.,0.,1.));+#310 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#311 = DEFINITIONAL_REPRESENTATION('',(#312),#316);+#312 = LINE('',#313,#314);+#313 = CARTESIAN_POINT('',(0.15,3.975));+#314 = VECTOR('',#315,1.);+#315 = DIRECTION('',(1.224646799147E-16,-1.));+#316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#317 = ORIENTED_EDGE('',*,*,#318,.F.);+#318 = EDGE_CURVE('',#319,#291,#321,.T.);+#319 = VERTEX_POINT('',#320);+#320 = CARTESIAN_POINT('',(-1.95,0.84,0.825));+#321 = SURFACE_CURVE('',#322,(#326,#333),.PCURVE_S1.);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#326 = PCURVE('',#224,#327);+#327 = DEFINITIONAL_REPRESENTATION('',(#328),#332);+#328 = LINE('',#329,#330);+#329 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#330 = VECTOR('',#331,1.);+#331 = DIRECTION('',(1.,2.581914010756E-16));+#332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#333 = PCURVE('',#334,#339);+#334 = PLANE('',#335);+#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338);+#336 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#337 = DIRECTION('',(1.,1.110223024625E-16,0.));+#338 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#339 = DEFINITIONAL_REPRESENTATION('',(#340),#344);+#340 = LINE('',#341,#342);+#341 = CARTESIAN_POINT('',(0.,-0.2));+#342 = VECTOR('',#343,1.);+#343 = DIRECTION('',(1.,0.));+#344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#345 = ORIENTED_EDGE('',*,*,#346,.F.);+#346 = EDGE_CURVE('',#347,#319,#349,.T.);+#347 = VERTEX_POINT('',#348);+#348 = CARTESIAN_POINT('',(-1.95,0.43,0.825));+#349 = SURFACE_CURVE('',#350,(#354,#361),.PCURVE_S1.);+#350 = LINE('',#351,#352);+#351 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#352 = VECTOR('',#353,1.);+#353 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#354 = PCURVE('',#224,#355);+#355 = DEFINITIONAL_REPRESENTATION('',(#356),#360);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(1.,5.415722071342E-16));+#360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#361 = PCURVE('',#362,#367);+#362 = PLANE('',#363);+#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366);+#364 = CARTESIAN_POINT('',(-1.8,0.43,0.825));+#365 = DIRECTION('',(0.,0.,1.));+#366 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#367 = DEFINITIONAL_REPRESENTATION('',(#368),#372);+#368 = LINE('',#369,#370);+#369 = CARTESIAN_POINT('',(0.15,2.705));+#370 = VECTOR('',#371,1.);+#371 = DIRECTION('',(1.224646799147E-16,-1.));+#372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#373 = ORIENTED_EDGE('',*,*,#374,.F.);+#374 = EDGE_CURVE('',#375,#347,#377,.T.);+#375 = VERTEX_POINT('',#376);+#376 = CARTESIAN_POINT('',(-1.95,-0.43,0.825));+#377 = SURFACE_CURVE('',#378,(#382,#389),.PCURVE_S1.);+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#382 = PCURVE('',#224,#383);+#383 = DEFINITIONAL_REPRESENTATION('',(#384),#388);+#384 = LINE('',#385,#386);+#385 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#386 = VECTOR('',#387,1.);+#387 = DIRECTION('',(1.,0.));+#388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#389 = PCURVE('',#390,#395);+#390 = PLANE('',#391);+#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);+#392 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#393 = DIRECTION('',(1.,1.110223024625E-16,0.));+#394 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,-0.2));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(1.,0.));+#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#401 = ORIENTED_EDGE('',*,*,#402,.F.);+#402 = EDGE_CURVE('',#403,#375,#405,.T.);+#403 = VERTEX_POINT('',#404);+#404 = CARTESIAN_POINT('',(-1.95,-0.84,0.825));+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#410 = PCURVE('',#224,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(1.,0.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(-1.8,-0.84,0.825));+#421 = DIRECTION('',(0.,0.,1.));+#422 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.15,1.435));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.224646799147E-16,-1.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ORIENTED_EDGE('',*,*,#430,.F.);+#430 = EDGE_CURVE('',#431,#403,#433,.T.);+#431 = VERTEX_POINT('',#432);+#432 = CARTESIAN_POINT('',(-1.95,-1.7,0.825));+#433 = SURFACE_CURVE('',#434,(#438,#445),.PCURVE_S1.);+#434 = LINE('',#435,#436);+#435 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#436 = VECTOR('',#437,1.);+#437 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#438 = PCURVE('',#224,#439);+#439 = DEFINITIONAL_REPRESENTATION('',(#440),#444);+#440 = LINE('',#441,#442);+#441 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#442 = VECTOR('',#443,1.);+#443 = DIRECTION('',(1.,1.290957005378E-16));+#444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#445 = PCURVE('',#446,#451);+#446 = PLANE('',#447);+#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450);+#448 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#449 = DIRECTION('',(1.,1.110223024625E-16,0.));+#450 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.,-0.2));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(1.,0.));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#459,#431,#461,.T.);+#459 = VERTEX_POINT('',#460);+#460 = CARTESIAN_POINT('',(-1.95,-2.11,0.825));+#461 = SURFACE_CURVE('',#462,(#466,#473),.PCURVE_S1.);+#462 = LINE('',#463,#464);+#463 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#464 = VECTOR('',#465,1.);+#465 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#466 = PCURVE('',#224,#467);+#467 = DEFINITIONAL_REPRESENTATION('',(#468),#472);+#468 = LINE('',#469,#470);+#469 = CARTESIAN_POINT('',(1.110223024625E-16,1.));+#470 = VECTOR('',#471,1.);+#471 = DIRECTION('',(1.,0.));+#472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#473 = PCURVE('',#474,#479);+#474 = PLANE('',#475);+#475 = AXIS2_PLACEMENT_3D('',#476,#477,#478);+#476 = CARTESIAN_POINT('',(-1.8,-2.11,0.825));+#477 = DIRECTION('',(0.,0.,1.));+#478 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#479 = DEFINITIONAL_REPRESENTATION('',(#480),#484);+#480 = LINE('',#481,#482);+#481 = CARTESIAN_POINT('',(0.15,0.165));+#482 = VECTOR('',#483,1.);+#483 = DIRECTION('',(1.224646799147E-16,-1.));+#484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#485 = ORIENTED_EDGE('',*,*,#486,.F.);+#486 = EDGE_CURVE('',#487,#459,#489,.T.);+#487 = VERTEX_POINT('',#488);+#488 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#489 = SURFACE_CURVE('',#490,(#494,#501),.PCURVE_S1.);+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#494 = PCURVE('',#224,#495);+#495 = DEFINITIONAL_REPRESENTATION('',(#496),#500);+#496 = LINE('',#497,#498);+#497 = CARTESIAN_POINT('',(1.978430405897E-17,1.));+#498 = VECTOR('',#499,1.);+#499 = DIRECTION('',(1.,-6.728624391668E-16));+#500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#501 = PCURVE('',#502,#507);+#502 = PLANE('',#503);+#503 = AXIS2_PLACEMENT_3D('',#504,#505,#506);+#504 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#505 = DIRECTION('',(1.,1.110223024625E-16,0.));+#506 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#507 = DEFINITIONAL_REPRESENTATION('',(#508),#512);+#508 = LINE('',#509,#510);+#509 = CARTESIAN_POINT('',(0.,-0.2));+#510 = VECTOR('',#511,1.);+#511 = DIRECTION('',(1.,0.));+#512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#513 = ORIENTED_EDGE('',*,*,#514,.F.);+#514 = EDGE_CURVE('',#240,#487,#515,.T.);+#515 = SURFACE_CURVE('',#516,(#519,#526),.PCURVE_S1.);+#516 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#517,#518),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#517 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#518 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#519 = PCURVE('',#224,#520);+#520 = DEFINITIONAL_REPRESENTATION('',(#521),#525);+#521 = LINE('',#522,#523);+#522 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#523 = VECTOR('',#524,1.);+#524 = DIRECTION('',(5.504038244495E-16,1.));+#525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#526 = PCURVE('',#527,#532);+#527 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#528,#529)+ ,(#530,#531+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#528 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#529 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#530 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#531 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#532 = DEFINITIONAL_REPRESENTATION('',(#533),#537);+#533 = LINE('',#534,#535);+#534 = CARTESIAN_POINT('',(0.247487373415,7.001610398739E-17));+#535 = VECTOR('',#536,1.);+#536 = DIRECTION('',(5.551115123126E-16,1.));+#537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#538 = ADVANCED_FACE('',(#539),#527,.F.);+#539 = FACE_BOUND('',#540,.F.);+#540 = EDGE_LOOP('',(#541,#563,#564,#592));+#541 = ORIENTED_EDGE('',*,*,#542,.T.);+#542 = EDGE_CURVE('',#543,#240,#545,.T.);+#543 = VERTEX_POINT('',#544);+#544 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#545 = SURFACE_CURVE('',#546,(#550,#556),.PCURVE_S1.);+#546 = LINE('',#547,#548);+#547 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#548 = VECTOR('',#549,1.);+#549 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#550 = PCURVE('',#527,#551);+#551 = DEFINITIONAL_REPRESENTATION('',(#552),#555);+#552 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#553,#554),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#553 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#554 = CARTESIAN_POINT('',(0.247487373415,1.101184707449E-18));+#555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#556 = PCURVE('',#65,#557);+#557 = DEFINITIONAL_REPRESENTATION('',(#558),#562);+#558 = LINE('',#559,#560);+#559 = CARTESIAN_POINT('',(3.762244851024,-2.767239296299));+#560 = VECTOR('',#561,1.);+#561 = DIRECTION('',(-0.98858755164,-0.150647445192));+#562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#563 = ORIENTED_EDGE('',*,*,#514,.T.);+#564 = ORIENTED_EDGE('',*,*,#565,.F.);+#565 = EDGE_CURVE('',#566,#487,#568,.T.);+#566 = VERTEX_POINT('',#567);+#567 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#568 = SURFACE_CURVE('',#569,(#573,#580),.PCURVE_S1.);+#569 = LINE('',#570,#571);+#570 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#571 = VECTOR('',#572,1.);+#572 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#573 = PCURVE('',#527,#574);+#574 = DEFINITIONAL_REPRESENTATION('',(#575),#579);+#575 = LINE('',#576,#577);+#576 = CARTESIAN_POINT('',(-7.846142148017E-17,1.));+#577 = VECTOR('',#578,1.);+#578 = DIRECTION('',(1.,0.));+#579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#580 = PCURVE('',#581,#586);+#581 = PLANE('',#582);+#582 = AXIS2_PLACEMENT_3D('',#583,#584,#585);+#583 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#584 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#585 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#586 = DEFINITIONAL_REPRESENTATION('',(#587),#591);+#587 = LINE('',#588,#589);+#588 = CARTESIAN_POINT('',(0.,-0.2));+#589 = VECTOR('',#590,1.);+#590 = DIRECTION('',(1.,0.));+#591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#592 = ORIENTED_EDGE('',*,*,#593,.F.);+#593 = EDGE_CURVE('',#543,#566,#594,.T.);+#594 = SURFACE_CURVE('',#595,(#598,#605),.PCURVE_S1.);+#595 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#596,#597),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#596 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#597 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#598 = PCURVE('',#527,#599);+#599 = DEFINITIONAL_REPRESENTATION('',(#600),#604);+#600 = LINE('',#601,#602);+#601 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#602 = VECTOR('',#603,1.);+#603 = DIRECTION('',(1.762446947573E-16,1.));+#604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#605 = PCURVE('',#606,#611);+#606 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#607,#608)+ ,(#609,#610+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#607 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#608 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#609 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#610 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#611 = DEFINITIONAL_REPRESENTATION('',(#612),#616);+#612 = LINE('',#613,#614);+#613 = CARTESIAN_POINT('',(3.55,-1.047195745689E-16));+#614 = VECTOR('',#615,1.);+#615 = DIRECTION('',(0.,1.));+#616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#617 = ADVANCED_FACE('',(#618),#606,.F.);+#618 = FACE_BOUND('',#619,.F.);+#619 = EDGE_LOOP('',(#620,#642,#643,#671));+#620 = ORIENTED_EDGE('',*,*,#621,.T.);+#621 = EDGE_CURVE('',#622,#543,#624,.T.);+#622 = VERTEX_POINT('',#623);+#623 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#624 = SURFACE_CURVE('',#625,(#629,#635),.PCURVE_S1.);+#625 = LINE('',#626,#627);+#626 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#627 = VECTOR('',#628,1.);+#628 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#629 = PCURVE('',#606,#630);+#630 = DEFINITIONAL_REPRESENTATION('',(#631),#634);+#631 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#632,#633),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#632 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#633 = CARTESIAN_POINT('',(3.55,2.72692595899E-17));+#634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#635 = PCURVE('',#65,#636);+#636 = DEFINITIONAL_REPRESENTATION('',(#637),#641);+#637 = LINE('',#638,#639);+#638 = CARTESIAN_POINT('',(5.79762894382,-8.180123245438E-13));+#639 = VECTOR('',#640,1.);+#640 = DIRECTION('',(-0.592513131498,-0.805560791625));+#641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#642 = ORIENTED_EDGE('',*,*,#593,.T.);+#643 = ORIENTED_EDGE('',*,*,#644,.F.);+#644 = EDGE_CURVE('',#645,#566,#647,.T.);+#645 = VERTEX_POINT('',#646);+#646 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#647 = SURFACE_CURVE('',#648,(#652,#659),.PCURVE_S1.);+#648 = LINE('',#649,#650);+#649 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#650 = VECTOR('',#651,1.);+#651 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#652 = PCURVE('',#606,#653);+#653 = DEFINITIONAL_REPRESENTATION('',(#654),#658);+#654 = LINE('',#655,#656);+#655 = CARTESIAN_POINT('',(2.189308472908E-16,1.));+#656 = VECTOR('',#657,1.);+#657 = DIRECTION('',(1.,3.127388801761E-17));+#658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#659 = PCURVE('',#660,#665);+#660 = PLANE('',#661);+#661 = AXIS2_PLACEMENT_3D('',#662,#663,#664);+#662 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#663 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#664 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#665 = DEFINITIONAL_REPRESENTATION('',(#666),#670);+#666 = LINE('',#667,#668);+#667 = CARTESIAN_POINT('',(-0.,-0.2));+#668 = VECTOR('',#669,1.);+#669 = DIRECTION('',(1.,0.));+#670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#671 = ORIENTED_EDGE('',*,*,#672,.F.);+#672 = EDGE_CURVE('',#622,#645,#673,.T.);+#673 = SURFACE_CURVE('',#674,(#677,#684),.PCURVE_S1.);+#674 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#675,#676),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#675 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#676 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#677 = PCURVE('',#606,#678);+#678 = DEFINITIONAL_REPRESENTATION('',(#679),#683);+#679 = LINE('',#680,#681);+#680 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#681 = VECTOR('',#682,1.);+#682 = DIRECTION('',(1.022122767958E-16,1.));+#683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#684 = PCURVE('',#685,#690);+#685 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#686,#687)+ ,(#688,#689+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#686 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#687 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#688 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#689 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#690 = DEFINITIONAL_REPRESENTATION('',(#691),#695);+#691 = LINE('',#692,#693);+#692 = CARTESIAN_POINT('',(0.247487373415,3.834137462134E-17));+#693 = VECTOR('',#694,1.);+#694 = DIRECTION('',(-3.608224830032E-16,1.));+#695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#696 = ADVANCED_FACE('',(#697),#685,.F.);+#697 = FACE_BOUND('',#698,.F.);+#698 = EDGE_LOOP('',(#699,#721,#722,#750));+#699 = ORIENTED_EDGE('',*,*,#700,.T.);+#700 = EDGE_CURVE('',#701,#622,#703,.T.);+#701 = VERTEX_POINT('',#702);+#702 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#703 = SURFACE_CURVE('',#704,(#708,#714),.PCURVE_S1.);+#704 = LINE('',#705,#706);+#705 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#706 = VECTOR('',#707,1.);+#707 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#708 = PCURVE('',#685,#709);+#709 = DEFINITIONAL_REPRESENTATION('',(#710),#713);+#710 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#711,#712),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#711 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#712 = CARTESIAN_POINT('',(0.247487373415,4.809026249314E-18));+#713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#714 = PCURVE('',#65,#715);+#715 = DEFINITIONAL_REPRESENTATION('',(#716),#720);+#716 = LINE('',#717,#718);+#717 = CARTESIAN_POINT('',(5.772577598272,0.164393417552));+#718 = VECTOR('',#719,1.);+#719 = DIRECTION('',(0.150647445192,-0.98858755164));+#720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#721 = ORIENTED_EDGE('',*,*,#672,.T.);+#722 = ORIENTED_EDGE('',*,*,#723,.F.);+#723 = EDGE_CURVE('',#724,#645,#726,.T.);+#724 = VERTEX_POINT('',#725);+#725 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#726 = SURFACE_CURVE('',#727,(#731,#738),.PCURVE_S1.);+#727 = LINE('',#728,#729);+#728 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#729 = VECTOR('',#730,1.);+#730 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#731 = PCURVE('',#685,#732);+#732 = DEFINITIONAL_REPRESENTATION('',(#733),#737);+#733 = LINE('',#734,#735);+#734 = CARTESIAN_POINT('',(7.999472487695E-17,1.));+#735 = VECTOR('',#736,1.);+#736 = DIRECTION('',(1.,0.));+#737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#738 = PCURVE('',#739,#744);+#739 = PLANE('',#740);+#740 = AXIS2_PLACEMENT_3D('',#741,#742,#743);+#741 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#742 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#743 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#744 = DEFINITIONAL_REPRESENTATION('',(#745),#749);+#745 = LINE('',#746,#747);+#746 = CARTESIAN_POINT('',(-0.,-0.2));+#747 = VECTOR('',#748,1.);+#748 = DIRECTION('',(1.,0.));+#749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#750 = ORIENTED_EDGE('',*,*,#751,.F.);+#751 = EDGE_CURVE('',#701,#724,#752,.T.);+#752 = SURFACE_CURVE('',#753,(#756,#763),.PCURVE_S1.);+#753 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#754,#755),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#754 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#755 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#756 = PCURVE('',#685,#757);+#757 = DEFINITIONAL_REPRESENTATION('',(#758),#762);+#758 = LINE('',#759,#760);+#759 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#760 = VECTOR('',#761,1.);+#761 = DIRECTION('',(-4.463333469861E-16,1.));+#762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#763 = PCURVE('',#764,#769);+#764 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#765,#766)+ ,(#767,#768+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#765 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#766 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#767 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#768 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#769 = DEFINITIONAL_REPRESENTATION('',(#770),#774);+#770 = LINE('',#771,#772);+#771 = CARTESIAN_POINT('',(4.55,-5.031297844791E-18));+#772 = VECTOR('',#773,1.);+#773 = DIRECTION('',(0.,1.));+#774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#775 = ADVANCED_FACE('',(#776),#764,.F.);+#776 = FACE_BOUND('',#777,.F.);+#777 = EDGE_LOOP('',(#778,#800,#801,#829,#857,#885,#913,#941,#969,#997,+ #1025,#1053));+#778 = ORIENTED_EDGE('',*,*,#779,.T.);+#779 = EDGE_CURVE('',#780,#701,#782,.T.);+#780 = VERTEX_POINT('',#781);+#781 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#782 = SURFACE_CURVE('',#783,(#787,#793),.PCURVE_S1.);+#783 = LINE('',#784,#785);+#784 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#785 = VECTOR('',#786,1.);+#786 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#787 = PCURVE('',#764,#788);+#788 = DEFINITIONAL_REPRESENTATION('',(#789),#792);+#789 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#790,#791),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#790 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#791 = CARTESIAN_POINT('',(4.55,1.070087642278E-16));+#792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#793 = PCURVE('',#65,#794);+#794 = DEFINITIONAL_REPRESENTATION('',(#795),#799);+#795 = LINE('',#796,#797);+#796 = CARTESIAN_POINT('',(2.199777510349,2.792290641846));+#797 = VECTOR('',#798,1.);+#798 = DIRECTION('',(0.805560791625,-0.592513131498));+#799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#800 = ORIENTED_EDGE('',*,*,#751,.T.);+#801 = ORIENTED_EDGE('',*,*,#802,.F.);+#802 = EDGE_CURVE('',#803,#724,#805,.T.);+#803 = VERTEX_POINT('',#804);+#804 = CARTESIAN_POINT('',(1.95,-2.11,0.825));+#805 = SURFACE_CURVE('',#806,(#810,#817),.PCURVE_S1.);+#806 = LINE('',#807,#808);+#807 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#808 = VECTOR('',#809,1.);+#809 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#810 = PCURVE('',#764,#811);+#811 = DEFINITIONAL_REPRESENTATION('',(#812),#816);+#812 = LINE('',#813,#814);+#813 = CARTESIAN_POINT('',(8.881784197001E-16,1.));+#814 = VECTOR('',#815,1.);+#815 = DIRECTION('',(1.,1.345724878334E-15));+#816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#817 = PCURVE('',#818,#823);+#818 = PLANE('',#819);+#819 = AXIS2_PLACEMENT_3D('',#820,#821,#822);+#820 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#821 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#822 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#823 = DEFINITIONAL_REPRESENTATION('',(#824),#828);+#824 = LINE('',#825,#826);+#825 = CARTESIAN_POINT('',(0.,-0.2));+#826 = VECTOR('',#827,1.);+#827 = DIRECTION('',(1.,0.));+#828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#829 = ORIENTED_EDGE('',*,*,#830,.F.);+#830 = EDGE_CURVE('',#831,#803,#833,.T.);+#831 = VERTEX_POINT('',#832);+#832 = CARTESIAN_POINT('',(1.95,-1.7,0.825));+#833 = SURFACE_CURVE('',#834,(#838,#845),.PCURVE_S1.);+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#838 = PCURVE('',#764,#839);+#839 = DEFINITIONAL_REPRESENTATION('',(#840),#844);+#840 = LINE('',#841,#842);+#841 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#842 = VECTOR('',#843,1.);+#843 = DIRECTION('',(1.,5.415722071342E-16));+#844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#845 = PCURVE('',#846,#851);+#846 = PLANE('',#847);+#847 = AXIS2_PLACEMENT_3D('',#848,#849,#850);+#848 = CARTESIAN_POINT('',(1.8,-1.7,0.825));+#849 = DIRECTION('',(0.,0.,1.));+#850 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#851 = DEFINITIONAL_REPRESENTATION('',(#852),#856);+#852 = LINE('',#853,#854);+#853 = CARTESIAN_POINT('',(0.15,3.975));+#854 = VECTOR('',#855,1.);+#855 = DIRECTION('',(0.,-1.));+#856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#857 = ORIENTED_EDGE('',*,*,#858,.F.);+#858 = EDGE_CURVE('',#859,#831,#861,.T.);+#859 = VERTEX_POINT('',#860);+#860 = CARTESIAN_POINT('',(1.95,-0.84,0.825));+#861 = SURFACE_CURVE('',#862,(#866,#873),.PCURVE_S1.);+#862 = LINE('',#863,#864);+#863 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#864 = VECTOR('',#865,1.);+#865 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#866 = PCURVE('',#764,#867);+#867 = DEFINITIONAL_REPRESENTATION('',(#868),#872);+#868 = LINE('',#869,#870);+#869 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#870 = VECTOR('',#871,1.);+#871 = DIRECTION('',(1.,2.581914010756E-16));+#872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#873 = PCURVE('',#874,#879);+#874 = PLANE('',#875);+#875 = AXIS2_PLACEMENT_3D('',#876,#877,#878);+#876 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#877 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#878 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#879 = DEFINITIONAL_REPRESENTATION('',(#880),#884);+#880 = LINE('',#881,#882);+#881 = CARTESIAN_POINT('',(0.,-0.2));+#882 = VECTOR('',#883,1.);+#883 = DIRECTION('',(1.,0.));+#884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#885 = ORIENTED_EDGE('',*,*,#886,.F.);+#886 = EDGE_CURVE('',#887,#859,#889,.T.);+#887 = VERTEX_POINT('',#888);+#888 = CARTESIAN_POINT('',(1.95,-0.43,0.825));+#889 = SURFACE_CURVE('',#890,(#894,#901),.PCURVE_S1.);+#890 = LINE('',#891,#892);+#891 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#892 = VECTOR('',#893,1.);+#893 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#894 = PCURVE('',#764,#895);+#895 = DEFINITIONAL_REPRESENTATION('',(#896),#900);+#896 = LINE('',#897,#898);+#897 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#898 = VECTOR('',#899,1.);+#899 = DIRECTION('',(1.,5.415722071342E-16));+#900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#901 = PCURVE('',#902,#907);+#902 = PLANE('',#903);+#903 = AXIS2_PLACEMENT_3D('',#904,#905,#906);+#904 = CARTESIAN_POINT('',(1.8,-0.43,0.825));+#905 = DIRECTION('',(0.,0.,1.));+#906 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#907 = DEFINITIONAL_REPRESENTATION('',(#908),#912);+#908 = LINE('',#909,#910);+#909 = CARTESIAN_POINT('',(0.15,2.705));+#910 = VECTOR('',#911,1.);+#911 = DIRECTION('',(0.,-1.));+#912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#913 = ORIENTED_EDGE('',*,*,#914,.F.);+#914 = EDGE_CURVE('',#915,#887,#917,.T.);+#915 = VERTEX_POINT('',#916);+#916 = CARTESIAN_POINT('',(1.95,0.43,0.825));+#917 = SURFACE_CURVE('',#918,(#922,#929),.PCURVE_S1.);+#918 = LINE('',#919,#920);+#919 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#920 = VECTOR('',#921,1.);+#921 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#922 = PCURVE('',#764,#923);+#923 = DEFINITIONAL_REPRESENTATION('',(#924),#928);+#924 = LINE('',#925,#926);+#925 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#926 = VECTOR('',#927,1.);+#927 = DIRECTION('',(1.,0.));+#928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#929 = PCURVE('',#930,#935);+#930 = PLANE('',#931);+#931 = AXIS2_PLACEMENT_3D('',#932,#933,#934);+#932 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#933 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#934 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#935 = DEFINITIONAL_REPRESENTATION('',(#936),#940);+#936 = LINE('',#937,#938);+#937 = CARTESIAN_POINT('',(0.,-0.2));+#938 = VECTOR('',#939,1.);+#939 = DIRECTION('',(1.,0.));+#940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#941 = ORIENTED_EDGE('',*,*,#942,.F.);+#942 = EDGE_CURVE('',#943,#915,#945,.T.);+#943 = VERTEX_POINT('',#944);+#944 = CARTESIAN_POINT('',(1.95,0.84,0.825));+#945 = SURFACE_CURVE('',#946,(#950,#957),.PCURVE_S1.);+#946 = LINE('',#947,#948);+#947 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#948 = VECTOR('',#949,1.);+#949 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#950 = PCURVE('',#764,#951);+#951 = DEFINITIONAL_REPRESENTATION('',(#952),#956);+#952 = LINE('',#953,#954);+#953 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#954 = VECTOR('',#955,1.);+#955 = DIRECTION('',(1.,0.));+#956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#957 = PCURVE('',#958,#963);+#958 = PLANE('',#959);+#959 = AXIS2_PLACEMENT_3D('',#960,#961,#962);+#960 = CARTESIAN_POINT('',(1.8,0.84,0.825));+#961 = DIRECTION('',(0.,0.,1.));+#962 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#963 = DEFINITIONAL_REPRESENTATION('',(#964),#968);+#964 = LINE('',#965,#966);+#965 = CARTESIAN_POINT('',(0.15,1.435));+#966 = VECTOR('',#967,1.);+#967 = DIRECTION('',(0.,-1.));+#968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#969 = ORIENTED_EDGE('',*,*,#970,.F.);+#970 = EDGE_CURVE('',#971,#943,#973,.T.);+#971 = VERTEX_POINT('',#972);+#972 = CARTESIAN_POINT('',(1.95,1.7,0.825));+#973 = SURFACE_CURVE('',#974,(#978,#985),.PCURVE_S1.);+#974 = LINE('',#975,#976);+#975 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#976 = VECTOR('',#977,1.);+#977 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#978 = PCURVE('',#764,#979);+#979 = DEFINITIONAL_REPRESENTATION('',(#980),#984);+#980 = LINE('',#981,#982);+#981 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#982 = VECTOR('',#983,1.);+#983 = DIRECTION('',(1.,1.290957005378E-16));+#984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#985 = PCURVE('',#986,#991);+#986 = PLANE('',#987);+#987 = AXIS2_PLACEMENT_3D('',#988,#989,#990);+#988 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#989 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#990 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#991 = DEFINITIONAL_REPRESENTATION('',(#992),#996);+#992 = LINE('',#993,#994);+#993 = CARTESIAN_POINT('',(0.,-0.2));+#994 = VECTOR('',#995,1.);+#995 = DIRECTION('',(1.,0.));+#996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#997 = ORIENTED_EDGE('',*,*,#998,.F.);+#998 = EDGE_CURVE('',#999,#971,#1001,.T.);+#999 = VERTEX_POINT('',#1000);+#1000 = CARTESIAN_POINT('',(1.95,2.11,0.825));+#1001 = SURFACE_CURVE('',#1002,(#1006,#1013),.PCURVE_S1.);+#1002 = LINE('',#1003,#1004);+#1003 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1004 = VECTOR('',#1005,1.);+#1005 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1006 = PCURVE('',#764,#1007);+#1007 = DEFINITIONAL_REPRESENTATION('',(#1008),#1012);+#1008 = LINE('',#1009,#1010);+#1009 = CARTESIAN_POINT('',(1.110223024625E-16,1.));+#1010 = VECTOR('',#1011,1.);+#1011 = DIRECTION('',(1.,0.));+#1012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1013 = PCURVE('',#1014,#1019);+#1014 = PLANE('',#1015);+#1015 = AXIS2_PLACEMENT_3D('',#1016,#1017,#1018);+#1016 = CARTESIAN_POINT('',(1.8,2.11,0.825));+#1017 = DIRECTION('',(0.,0.,1.));+#1018 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1019 = DEFINITIONAL_REPRESENTATION('',(#1020),#1024);+#1020 = LINE('',#1021,#1022);+#1021 = CARTESIAN_POINT('',(0.15,0.165));+#1022 = VECTOR('',#1023,1.);+#1023 = DIRECTION('',(0.,-1.));+#1024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1025 = ORIENTED_EDGE('',*,*,#1026,.F.);+#1026 = EDGE_CURVE('',#1027,#999,#1029,.T.);+#1027 = VERTEX_POINT('',#1028);+#1028 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1029 = SURFACE_CURVE('',#1030,(#1034,#1041),.PCURVE_S1.);+#1030 = LINE('',#1031,#1032);+#1031 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1032 = VECTOR('',#1033,1.);+#1033 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1034 = PCURVE('',#764,#1035);+#1035 = DEFINITIONAL_REPRESENTATION('',(#1036),#1040);+#1036 = LINE('',#1037,#1038);+#1037 = CARTESIAN_POINT('',(1.978430405897E-17,1.));+#1038 = VECTOR('',#1039,1.);+#1039 = DIRECTION('',(1.,-6.728624391668E-16));+#1040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1041 = PCURVE('',#1042,#1047);+#1042 = PLANE('',#1043);+#1043 = AXIS2_PLACEMENT_3D('',#1044,#1045,#1046);+#1044 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1045 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1046 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1047 = DEFINITIONAL_REPRESENTATION('',(#1048),#1052);+#1048 = LINE('',#1049,#1050);+#1049 = CARTESIAN_POINT('',(0.,-0.2));+#1050 = VECTOR('',#1051,1.);+#1051 = DIRECTION('',(1.,0.));+#1052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1053 = ORIENTED_EDGE('',*,*,#1054,.F.);+#1054 = EDGE_CURVE('',#780,#1027,#1055,.T.);+#1055 = SURFACE_CURVE('',#1056,(#1059,#1066),.PCURVE_S1.);+#1056 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1057,#1058),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1057 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#1058 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1059 = PCURVE('',#764,#1060);+#1060 = DEFINITIONAL_REPRESENTATION('',(#1061),#1065);+#1061 = LINE('',#1062,#1063);+#1062 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#1063 = VECTOR('',#1064,1.);+#1064 = DIRECTION('',(5.504038244495E-16,1.));+#1065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1066 = PCURVE('',#92,#1067);+#1067 = DEFINITIONAL_REPRESENTATION('',(#1068),#1072);+#1068 = LINE('',#1069,#1070);+#1069 = CARTESIAN_POINT('',(0.247487373415,7.001610398739E-17));+#1070 = VECTOR('',#1071,1.);+#1071 = DIRECTION('',(5.551115123126E-16,1.));+#1072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1073 = ADVANCED_FACE('',(#1074),#1042,.F.);+#1074 = FACE_BOUND('',#1075,.F.);+#1075 = EDGE_LOOP('',(#1076,#1101,#1102,#1130));+#1076 = ORIENTED_EDGE('',*,*,#1077,.F.);+#1077 = EDGE_CURVE('',#1027,#1078,#1080,.T.);+#1078 = VERTEX_POINT('',#1079);+#1079 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1080 = SURFACE_CURVE('',#1081,(#1084,#1090),.PCURVE_S1.);+#1081 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1082,#1083),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1082 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1083 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1084 = PCURVE('',#1042,#1085);+#1085 = DEFINITIONAL_REPRESENTATION('',(#1086),#1089);+#1086 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1087,#1088),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1087 = CARTESIAN_POINT('',(0.,-0.2));+#1088 = CARTESIAN_POINT('',(0.,0.));+#1089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1090 = PCURVE('',#1091,#1096);+#1091 = PLANE('',#1092);+#1092 = AXIS2_PLACEMENT_3D('',#1093,#1094,#1095);+#1093 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#1094 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1095 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1096 = DEFINITIONAL_REPRESENTATION('',(#1097),#1100);+#1097 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1098,#1099),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1098 = CARTESIAN_POINT('',(0.247487373415,-0.2));+#1099 = CARTESIAN_POINT('',(0.247487373415,0.));+#1100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1101 = ORIENTED_EDGE('',*,*,#1026,.T.);+#1102 = ORIENTED_EDGE('',*,*,#1103,.T.);+#1103 = EDGE_CURVE('',#999,#1104,#1106,.T.);+#1104 = VERTEX_POINT('',#1105);+#1105 = CARTESIAN_POINT('',(1.95,2.11,1.025));+#1106 = SURFACE_CURVE('',#1107,(#1111,#1118),.PCURVE_S1.);+#1107 = LINE('',#1108,#1109);+#1108 = CARTESIAN_POINT('',(1.95,2.11,0.786976568901));+#1109 = VECTOR('',#1110,1.);+#1110 = DIRECTION('',(0.,0.,1.));+#1111 = PCURVE('',#1042,#1112);+#1112 = DEFINITIONAL_REPRESENTATION('',(#1113),#1117);+#1113 = LINE('',#1114,#1115);+#1114 = CARTESIAN_POINT('',(0.165,-0.238023431099));+#1115 = VECTOR('',#1116,1.);+#1116 = DIRECTION('',(0.,1.));+#1117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1118 = PCURVE('',#1119,#1124);+#1119 = PLANE('',#1120);+#1120 = AXIS2_PLACEMENT_3D('',#1121,#1122,#1123);+#1121 = CARTESIAN_POINT('',(2.42560961319,2.11,0.548953137803));+#1122 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1123 = DIRECTION('',(0.,0.,1.));+#1124 = DEFINITIONAL_REPRESENTATION('',(#1125),#1129);+#1125 = LINE('',#1126,#1127);+#1126 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#1127 = VECTOR('',#1128,1.);+#1128 = DIRECTION('',(1.,0.));+#1129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1130 = ORIENTED_EDGE('',*,*,#1131,.F.);+#1131 = EDGE_CURVE('',#1078,#1104,#1132,.T.);+#1132 = SURFACE_CURVE('',#1133,(#1137,#1144),.PCURVE_S1.);+#1133 = LINE('',#1134,#1135);+#1134 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1135 = VECTOR('',#1136,1.);+#1136 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1137 = PCURVE('',#1042,#1138);+#1138 = DEFINITIONAL_REPRESENTATION('',(#1139),#1143);+#1139 = LINE('',#1140,#1141);+#1140 = CARTESIAN_POINT('',(0.,0.));+#1141 = VECTOR('',#1142,1.);+#1142 = DIRECTION('',(1.,0.));+#1143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1144 = PCURVE('',#1145,#1150);+#1145 = PLANE('',#1146);+#1146 = AXIS2_PLACEMENT_3D('',#1147,#1148,#1149);+#1147 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025));+#1148 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.));+#1149 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31));+#1150 = DEFINITIONAL_REPRESENTATION('',(#1151),#1155);+#1151 = LINE('',#1152,#1153);+#1152 = CARTESIAN_POINT('',(1.95,0.1375));+#1153 = VECTOR('',#1154,1.);+#1154 = DIRECTION('',(-1.859989286E-19,1.));+#1155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1156 = ADVANCED_FACE('',(#1157,#2170),#1145,.F.);+#1157 = FACE_BOUND('',#1158,.F.);+#1158 = EDGE_LOOP('',(#1159,#1184,#1207,#1228,#1229,#1252,#1280,#1308,+ #1331,#1359,#1387,#1415,#1438,#1466,#1494,#1522,#1545,#1573,#1601,+ #1629,#1652,#1675,#1698,#1721,#1744,#1772,#1800,#1828,#1851,#1879,+ #1907,#1935,#1958,#1986,#2014,#2042,#2065,#2093,#2121,#2149));+#1159 = ORIENTED_EDGE('',*,*,#1160,.T.);+#1160 = EDGE_CURVE('',#1161,#1163,#1165,.T.);+#1161 = VERTEX_POINT('',#1162);+#1162 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#1163 = VERTEX_POINT('',#1164);+#1164 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#1165 = SURFACE_CURVE('',#1166,(#1170,#1177),.PCURVE_S1.);+#1166 = LINE('',#1167,#1168);+#1167 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#1168 = VECTOR('',#1169,1.);+#1169 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1170 = PCURVE('',#1145,#1171);+#1171 = DEFINITIONAL_REPRESENTATION('',(#1172),#1176);+#1172 = LINE('',#1173,#1174);+#1173 = CARTESIAN_POINT('',(-1.95,0.1375));+#1174 = VECTOR('',#1175,1.);+#1175 = DIRECTION('',(0.707106781187,-0.707106781187));+#1176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1177 = PCURVE('',#199,#1178);+#1178 = DEFINITIONAL_REPRESENTATION('',(#1179),#1183);+#1179 = LINE('',#1180,#1181);+#1180 = CARTESIAN_POINT('',(0.,0.));+#1181 = VECTOR('',#1182,1.);+#1182 = DIRECTION('',(1.,0.));+#1183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1184 = ORIENTED_EDGE('',*,*,#1185,.T.);+#1185 = EDGE_CURVE('',#1163,#1186,#1188,.T.);+#1186 = VERTEX_POINT('',#1187);+#1187 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#1188 = SURFACE_CURVE('',#1189,(#1193,#1200),.PCURVE_S1.);+#1189 = LINE('',#1190,#1191);+#1190 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#1191 = VECTOR('',#1192,1.);+#1192 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1193 = PCURVE('',#1145,#1194);+#1194 = DEFINITIONAL_REPRESENTATION('',(#1195),#1199);+#1195 = LINE('',#1196,#1197);+#1196 = CARTESIAN_POINT('',(-1.775,-3.75E-02));+#1197 = VECTOR('',#1198,1.);+#1198 = DIRECTION('',(1.,1.859989286E-19));+#1199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1200 = PCURVE('',#120,#1201);+#1201 = DEFINITIONAL_REPRESENTATION('',(#1202),#1206);+#1202 = LINE('',#1203,#1204);+#1203 = CARTESIAN_POINT('',(0.,0.));+#1204 = VECTOR('',#1205,1.);+#1205 = DIRECTION('',(1.,0.));+#1206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1207 = ORIENTED_EDGE('',*,*,#1208,.T.);+#1208 = EDGE_CURVE('',#1186,#1078,#1209,.T.);+#1209 = SURFACE_CURVE('',#1210,(#1214,#1221),.PCURVE_S1.);+#1210 = LINE('',#1211,#1212);+#1211 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#1212 = VECTOR('',#1213,1.);+#1213 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1214 = PCURVE('',#1145,#1215);+#1215 = DEFINITIONAL_REPRESENTATION('',(#1216),#1220);+#1216 = LINE('',#1217,#1218);+#1217 = CARTESIAN_POINT('',(1.775,-3.75E-02));+#1218 = VECTOR('',#1219,1.);+#1219 = DIRECTION('',(0.707106781187,0.707106781187));+#1220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1221 = PCURVE('',#1091,#1222);+#1222 = DEFINITIONAL_REPRESENTATION('',(#1223),#1227);+#1223 = LINE('',#1224,#1225);+#1224 = CARTESIAN_POINT('',(0.,0.));+#1225 = VECTOR('',#1226,1.);+#1226 = DIRECTION('',(1.,0.));+#1227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1228 = ORIENTED_EDGE('',*,*,#1131,.T.);+#1229 = ORIENTED_EDGE('',*,*,#1230,.F.);+#1230 = EDGE_CURVE('',#1231,#1104,#1233,.T.);+#1231 = VERTEX_POINT('',#1232);+#1232 = CARTESIAN_POINT('',(2.25,2.11,1.025));+#1233 = SURFACE_CURVE('',#1234,(#1238,#1245),.PCURVE_S1.);+#1234 = LINE('',#1235,#1236);+#1235 = CARTESIAN_POINT('',(2.25,2.11,1.025));+#1236 = VECTOR('',#1237,1.);+#1237 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1238 = PCURVE('',#1145,#1239);+#1239 = DEFINITIONAL_REPRESENTATION('',(#1240),#1244);+#1240 = LINE('',#1241,#1242);+#1241 = CARTESIAN_POINT('',(2.25,0.3025));+#1242 = VECTOR('',#1243,1.);+#1243 = DIRECTION('',(-1.,-1.859989286E-19));+#1244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1245 = PCURVE('',#1119,#1246);+#1246 = DEFINITIONAL_REPRESENTATION('',(#1247),#1251);+#1247 = LINE('',#1248,#1249);+#1248 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1249 = VECTOR('',#1250,1.);+#1250 = DIRECTION('',(0.,1.));+#1251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1252 = ORIENTED_EDGE('',*,*,#1253,.T.);+#1253 = EDGE_CURVE('',#1231,#1254,#1256,.T.);+#1254 = VERTEX_POINT('',#1255);+#1255 = CARTESIAN_POINT('',(2.25,1.7,1.025));+#1256 = SURFACE_CURVE('',#1257,(#1261,#1268),.PCURVE_S1.);+#1257 = LINE('',#1258,#1259);+#1258 = CARTESIAN_POINT('',(2.25,2.11,1.025));+#1259 = VECTOR('',#1260,1.);+#1260 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1261 = PCURVE('',#1145,#1262);+#1262 = DEFINITIONAL_REPRESENTATION('',(#1263),#1267);+#1263 = LINE('',#1264,#1265);+#1264 = CARTESIAN_POINT('',(2.25,0.3025));+#1265 = VECTOR('',#1266,1.);+#1266 = DIRECTION('',(-1.859989286E-19,1.));+#1267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1268 = PCURVE('',#1269,#1274);+#1269 = CYLINDRICAL_SURFACE('',#1270,0.3);+#1270 = AXIS2_PLACEMENT_3D('',#1271,#1272,#1273);+#1271 = CARTESIAN_POINT('',(2.25,2.11,0.725));+#1272 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1273 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1274 = DEFINITIONAL_REPRESENTATION('',(#1275),#1279);+#1275 = LINE('',#1276,#1277);+#1276 = CARTESIAN_POINT('',(4.886921905584,0.));+#1277 = VECTOR('',#1278,1.);+#1278 = DIRECTION('',(-4.332577657074E-15,-1.));+#1279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1280 = ORIENTED_EDGE('',*,*,#1281,.T.);+#1281 = EDGE_CURVE('',#1254,#1282,#1284,.T.);+#1282 = VERTEX_POINT('',#1283);+#1283 = CARTESIAN_POINT('',(1.95,1.7,1.025));+#1284 = SURFACE_CURVE('',#1285,(#1289,#1296),.PCURVE_S1.);+#1285 = LINE('',#1286,#1287);+#1286 = CARTESIAN_POINT('',(2.25,1.7,1.025));+#1287 = VECTOR('',#1288,1.);+#1288 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1289 = PCURVE('',#1145,#1290);+#1290 = DEFINITIONAL_REPRESENTATION('',(#1291),#1295);+#1291 = LINE('',#1292,#1293);+#1292 = CARTESIAN_POINT('',(2.25,0.7125));+#1293 = VECTOR('',#1294,1.);+#1294 = DIRECTION('',(-1.,-1.859989286E-19));+#1295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1296 = PCURVE('',#1297,#1302);+#1297 = PLANE('',#1298);+#1298 = AXIS2_PLACEMENT_3D('',#1299,#1300,#1301);+#1299 = CARTESIAN_POINT('',(2.42560961319,1.7,0.548953137803));+#1300 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1301 = DIRECTION('',(0.,0.,1.));+#1302 = DEFINITIONAL_REPRESENTATION('',(#1303),#1307);+#1303 = LINE('',#1304,#1305);+#1304 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1305 = VECTOR('',#1306,1.);+#1306 = DIRECTION('',(0.,1.));+#1307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1308 = ORIENTED_EDGE('',*,*,#1309,.T.);+#1309 = EDGE_CURVE('',#1282,#1310,#1312,.T.);+#1310 = VERTEX_POINT('',#1311);+#1311 = CARTESIAN_POINT('',(1.95,0.84,1.025));+#1312 = SURFACE_CURVE('',#1313,(#1317,#1324),.PCURVE_S1.);+#1313 = LINE('',#1314,#1315);+#1314 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1315 = VECTOR('',#1316,1.);+#1316 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1317 = PCURVE('',#1145,#1318);+#1318 = DEFINITIONAL_REPRESENTATION('',(#1319),#1323);+#1319 = LINE('',#1320,#1321);+#1320 = CARTESIAN_POINT('',(1.95,0.1375));+#1321 = VECTOR('',#1322,1.);+#1322 = DIRECTION('',(-1.859989286E-19,1.));+#1323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1324 = PCURVE('',#986,#1325);+#1325 = DEFINITIONAL_REPRESENTATION('',(#1326),#1330);+#1326 = LINE('',#1327,#1328);+#1327 = CARTESIAN_POINT('',(0.,0.));+#1328 = VECTOR('',#1329,1.);+#1329 = DIRECTION('',(1.,0.));+#1330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1331 = ORIENTED_EDGE('',*,*,#1332,.F.);+#1332 = EDGE_CURVE('',#1333,#1310,#1335,.T.);+#1333 = VERTEX_POINT('',#1334);+#1334 = CARTESIAN_POINT('',(2.25,0.84,1.025));+#1335 = SURFACE_CURVE('',#1336,(#1340,#1347),.PCURVE_S1.);+#1336 = LINE('',#1337,#1338);+#1337 = CARTESIAN_POINT('',(2.25,0.84,1.025));+#1338 = VECTOR('',#1339,1.);+#1339 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1340 = PCURVE('',#1145,#1341);+#1341 = DEFINITIONAL_REPRESENTATION('',(#1342),#1346);+#1342 = LINE('',#1343,#1344);+#1343 = CARTESIAN_POINT('',(2.25,1.5725));+#1344 = VECTOR('',#1345,1.);+#1345 = DIRECTION('',(-1.,-1.859989286E-19));+#1346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1347 = PCURVE('',#1348,#1353);+#1348 = PLANE('',#1349);+#1349 = AXIS2_PLACEMENT_3D('',#1350,#1351,#1352);+#1350 = CARTESIAN_POINT('',(2.42560961319,0.84,0.548953137803));+#1351 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1352 = DIRECTION('',(0.,0.,1.));+#1353 = DEFINITIONAL_REPRESENTATION('',(#1354),#1358);+#1354 = LINE('',#1355,#1356);+#1355 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1356 = VECTOR('',#1357,1.);+#1357 = DIRECTION('',(0.,1.));+#1358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1359 = ORIENTED_EDGE('',*,*,#1360,.T.);+#1360 = EDGE_CURVE('',#1333,#1361,#1363,.T.);+#1361 = VERTEX_POINT('',#1362);+#1362 = CARTESIAN_POINT('',(2.25,0.43,1.025));+#1363 = SURFACE_CURVE('',#1364,(#1368,#1375),.PCURVE_S1.);+#1364 = LINE('',#1365,#1366);+#1365 = CARTESIAN_POINT('',(2.25,0.84,1.025));+#1366 = VECTOR('',#1367,1.);+#1367 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1368 = PCURVE('',#1145,#1369);+#1369 = DEFINITIONAL_REPRESENTATION('',(#1370),#1374);+#1370 = LINE('',#1371,#1372);+#1371 = CARTESIAN_POINT('',(2.25,1.5725));+#1372 = VECTOR('',#1373,1.);+#1373 = DIRECTION('',(-1.859989286E-19,1.));+#1374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1375 = PCURVE('',#1376,#1381);+#1376 = CYLINDRICAL_SURFACE('',#1377,0.3);+#1377 = AXIS2_PLACEMENT_3D('',#1378,#1379,#1380);+#1378 = CARTESIAN_POINT('',(2.25,0.84,0.725));+#1379 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1380 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1381 = DEFINITIONAL_REPRESENTATION('',(#1382),#1386);+#1382 = LINE('',#1383,#1384);+#1383 = CARTESIAN_POINT('',(4.886921905584,0.));+#1384 = VECTOR('',#1385,1.);+#1385 = DIRECTION('',(0.,-1.));+#1386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1387 = ORIENTED_EDGE('',*,*,#1388,.T.);+#1388 = EDGE_CURVE('',#1361,#1389,#1391,.T.);+#1389 = VERTEX_POINT('',#1390);+#1390 = CARTESIAN_POINT('',(1.95,0.43,1.025));+#1391 = SURFACE_CURVE('',#1392,(#1396,#1403),.PCURVE_S1.);+#1392 = LINE('',#1393,#1394);+#1393 = CARTESIAN_POINT('',(2.25,0.43,1.025));+#1394 = VECTOR('',#1395,1.);+#1395 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1396 = PCURVE('',#1145,#1397);+#1397 = DEFINITIONAL_REPRESENTATION('',(#1398),#1402);+#1398 = LINE('',#1399,#1400);+#1399 = CARTESIAN_POINT('',(2.25,1.9825));+#1400 = VECTOR('',#1401,1.);+#1401 = DIRECTION('',(-1.,-1.859989286E-19));+#1402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1403 = PCURVE('',#1404,#1409);+#1404 = PLANE('',#1405);+#1405 = AXIS2_PLACEMENT_3D('',#1406,#1407,#1408);+#1406 = CARTESIAN_POINT('',(2.42560961319,0.43,0.548953137803));+#1407 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1408 = DIRECTION('',(0.,0.,1.));+#1409 = DEFINITIONAL_REPRESENTATION('',(#1410),#1414);+#1410 = LINE('',#1411,#1412);+#1411 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1412 = VECTOR('',#1413,1.);+#1413 = DIRECTION('',(0.,1.));+#1414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1415 = ORIENTED_EDGE('',*,*,#1416,.T.);+#1416 = EDGE_CURVE('',#1389,#1417,#1419,.T.);+#1417 = VERTEX_POINT('',#1418);+#1418 = CARTESIAN_POINT('',(1.95,-0.43,1.025));+#1419 = SURFACE_CURVE('',#1420,(#1424,#1431),.PCURVE_S1.);+#1420 = LINE('',#1421,#1422);+#1421 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1422 = VECTOR('',#1423,1.);+#1423 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1424 = PCURVE('',#1145,#1425);+#1425 = DEFINITIONAL_REPRESENTATION('',(#1426),#1430);+#1426 = LINE('',#1427,#1428);+#1427 = CARTESIAN_POINT('',(1.95,0.1375));+#1428 = VECTOR('',#1429,1.);+#1429 = DIRECTION('',(-1.859989286E-19,1.));+#1430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1431 = PCURVE('',#930,#1432);+#1432 = DEFINITIONAL_REPRESENTATION('',(#1433),#1437);+#1433 = LINE('',#1434,#1435);+#1434 = CARTESIAN_POINT('',(0.,0.));+#1435 = VECTOR('',#1436,1.);+#1436 = DIRECTION('',(1.,0.));+#1437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1438 = ORIENTED_EDGE('',*,*,#1439,.F.);+#1439 = EDGE_CURVE('',#1440,#1417,#1442,.T.);+#1440 = VERTEX_POINT('',#1441);+#1441 = CARTESIAN_POINT('',(2.25,-0.43,1.025));+#1442 = SURFACE_CURVE('',#1443,(#1447,#1454),.PCURVE_S1.);+#1443 = LINE('',#1444,#1445);+#1444 = CARTESIAN_POINT('',(2.25,-0.43,1.025));+#1445 = VECTOR('',#1446,1.);+#1446 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1447 = PCURVE('',#1145,#1448);+#1448 = DEFINITIONAL_REPRESENTATION('',(#1449),#1453);+#1449 = LINE('',#1450,#1451);+#1450 = CARTESIAN_POINT('',(2.25,2.8425));+#1451 = VECTOR('',#1452,1.);+#1452 = DIRECTION('',(-1.,-1.859989286E-19));+#1453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1454 = PCURVE('',#1455,#1460);+#1455 = PLANE('',#1456);+#1456 = AXIS2_PLACEMENT_3D('',#1457,#1458,#1459);+#1457 = CARTESIAN_POINT('',(2.42560961319,-0.43,0.548953137803));+#1458 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1459 = DIRECTION('',(0.,0.,1.));+#1460 = DEFINITIONAL_REPRESENTATION('',(#1461),#1465);+#1461 = LINE('',#1462,#1463);+#1462 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1463 = VECTOR('',#1464,1.);+#1464 = DIRECTION('',(0.,1.));+#1465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1466 = ORIENTED_EDGE('',*,*,#1467,.T.);+#1467 = EDGE_CURVE('',#1440,#1468,#1470,.T.);+#1468 = VERTEX_POINT('',#1469);+#1469 = CARTESIAN_POINT('',(2.25,-0.84,1.025));+#1470 = SURFACE_CURVE('',#1471,(#1475,#1482),.PCURVE_S1.);+#1471 = LINE('',#1472,#1473);+#1472 = CARTESIAN_POINT('',(2.25,-0.43,1.025));+#1473 = VECTOR('',#1474,1.);+#1474 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1475 = PCURVE('',#1145,#1476);+#1476 = DEFINITIONAL_REPRESENTATION('',(#1477),#1481);+#1477 = LINE('',#1478,#1479);+#1478 = CARTESIAN_POINT('',(2.25,2.8425));+#1479 = VECTOR('',#1480,1.);+#1480 = DIRECTION('',(-1.859989286E-19,1.));+#1481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1482 = PCURVE('',#1483,#1488);+#1483 = CYLINDRICAL_SURFACE('',#1484,0.3);+#1484 = AXIS2_PLACEMENT_3D('',#1485,#1486,#1487);+#1485 = CARTESIAN_POINT('',(2.25,-0.43,0.725));+#1486 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1487 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1488 = DEFINITIONAL_REPRESENTATION('',(#1489),#1493);+#1489 = LINE('',#1490,#1491);+#1490 = CARTESIAN_POINT('',(4.886921905584,0.));+#1491 = VECTOR('',#1492,1.);+#1492 = DIRECTION('',(0.,-1.));+#1493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1494 = ORIENTED_EDGE('',*,*,#1495,.T.);+#1495 = EDGE_CURVE('',#1468,#1496,#1498,.T.);+#1496 = VERTEX_POINT('',#1497);+#1497 = CARTESIAN_POINT('',(1.95,-0.84,1.025));+#1498 = SURFACE_CURVE('',#1499,(#1503,#1510),.PCURVE_S1.);+#1499 = LINE('',#1500,#1501);+#1500 = CARTESIAN_POINT('',(2.25,-0.84,1.025));+#1501 = VECTOR('',#1502,1.);+#1502 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1503 = PCURVE('',#1145,#1504);+#1504 = DEFINITIONAL_REPRESENTATION('',(#1505),#1509);+#1505 = LINE('',#1506,#1507);+#1506 = CARTESIAN_POINT('',(2.25,3.2525));+#1507 = VECTOR('',#1508,1.);+#1508 = DIRECTION('',(-1.,-1.859989286E-19));+#1509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1510 = PCURVE('',#1511,#1516);+#1511 = PLANE('',#1512);+#1512 = AXIS2_PLACEMENT_3D('',#1513,#1514,#1515);+#1513 = CARTESIAN_POINT('',(2.42560961319,-0.84,0.548953137803));+#1514 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1515 = DIRECTION('',(0.,0.,1.));+#1516 = DEFINITIONAL_REPRESENTATION('',(#1517),#1521);+#1517 = LINE('',#1518,#1519);+#1518 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1519 = VECTOR('',#1520,1.);+#1520 = DIRECTION('',(0.,1.));+#1521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1522 = ORIENTED_EDGE('',*,*,#1523,.T.);+#1523 = EDGE_CURVE('',#1496,#1524,#1526,.T.);+#1524 = VERTEX_POINT('',#1525);+#1525 = CARTESIAN_POINT('',(1.95,-1.7,1.025));+#1526 = SURFACE_CURVE('',#1527,(#1531,#1538),.PCURVE_S1.);+#1527 = LINE('',#1528,#1529);+#1528 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1529 = VECTOR('',#1530,1.);+#1530 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1531 = PCURVE('',#1145,#1532);+#1532 = DEFINITIONAL_REPRESENTATION('',(#1533),#1537);+#1533 = LINE('',#1534,#1535);+#1534 = CARTESIAN_POINT('',(1.95,0.1375));+#1535 = VECTOR('',#1536,1.);+#1536 = DIRECTION('',(-1.859989286E-19,1.));+#1537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1538 = PCURVE('',#874,#1539);+#1539 = DEFINITIONAL_REPRESENTATION('',(#1540),#1544);+#1540 = LINE('',#1541,#1542);+#1541 = CARTESIAN_POINT('',(0.,0.));+#1542 = VECTOR('',#1543,1.);+#1543 = DIRECTION('',(1.,0.));+#1544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1545 = ORIENTED_EDGE('',*,*,#1546,.F.);+#1546 = EDGE_CURVE('',#1547,#1524,#1549,.T.);+#1547 = VERTEX_POINT('',#1548);+#1548 = CARTESIAN_POINT('',(2.25,-1.7,1.025));+#1549 = SURFACE_CURVE('',#1550,(#1554,#1561),.PCURVE_S1.);+#1550 = LINE('',#1551,#1552);+#1551 = CARTESIAN_POINT('',(2.25,-1.7,1.025));+#1552 = VECTOR('',#1553,1.);+#1553 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1554 = PCURVE('',#1145,#1555);+#1555 = DEFINITIONAL_REPRESENTATION('',(#1556),#1560);+#1556 = LINE('',#1557,#1558);+#1557 = CARTESIAN_POINT('',(2.25,4.1125));+#1558 = VECTOR('',#1559,1.);+#1559 = DIRECTION('',(-1.,-1.859989286E-19));+#1560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1561 = PCURVE('',#1562,#1567);+#1562 = PLANE('',#1563);+#1563 = AXIS2_PLACEMENT_3D('',#1564,#1565,#1566);+#1564 = CARTESIAN_POINT('',(2.42560961319,-1.7,0.548953137803));+#1565 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1566 = DIRECTION('',(0.,0.,1.));+#1567 = DEFINITIONAL_REPRESENTATION('',(#1568),#1572);+#1568 = LINE('',#1569,#1570);+#1569 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1570 = VECTOR('',#1571,1.);+#1571 = DIRECTION('',(0.,1.));+#1572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1573 = ORIENTED_EDGE('',*,*,#1574,.T.);+#1574 = EDGE_CURVE('',#1547,#1575,#1577,.T.);+#1575 = VERTEX_POINT('',#1576);+#1576 = CARTESIAN_POINT('',(2.25,-2.11,1.025));+#1577 = SURFACE_CURVE('',#1578,(#1582,#1589),.PCURVE_S1.);+#1578 = LINE('',#1579,#1580);+#1579 = CARTESIAN_POINT('',(2.25,-1.7,1.025));+#1580 = VECTOR('',#1581,1.);+#1581 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1582 = PCURVE('',#1145,#1583);+#1583 = DEFINITIONAL_REPRESENTATION('',(#1584),#1588);+#1584 = LINE('',#1585,#1586);+#1585 = CARTESIAN_POINT('',(2.25,4.1125));+#1586 = VECTOR('',#1587,1.);+#1587 = DIRECTION('',(-1.859989286E-19,1.));+#1588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1589 = PCURVE('',#1590,#1595);+#1590 = CYLINDRICAL_SURFACE('',#1591,0.3);+#1591 = AXIS2_PLACEMENT_3D('',#1592,#1593,#1594);+#1592 = CARTESIAN_POINT('',(2.25,-1.7,0.725));+#1593 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1594 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1595 = DEFINITIONAL_REPRESENTATION('',(#1596),#1600);+#1596 = LINE('',#1597,#1598);+#1597 = CARTESIAN_POINT('',(4.886921905584,0.));+#1598 = VECTOR('',#1599,1.);+#1599 = DIRECTION('',(-4.332577657074E-15,-1.));+#1600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1601 = ORIENTED_EDGE('',*,*,#1602,.T.);+#1602 = EDGE_CURVE('',#1575,#1603,#1605,.T.);+#1603 = VERTEX_POINT('',#1604);+#1604 = CARTESIAN_POINT('',(1.95,-2.11,1.025));+#1605 = SURFACE_CURVE('',#1606,(#1610,#1617),.PCURVE_S1.);+#1606 = LINE('',#1607,#1608);+#1607 = CARTESIAN_POINT('',(2.25,-2.11,1.025));+#1608 = VECTOR('',#1609,1.);+#1609 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1610 = PCURVE('',#1145,#1611);+#1611 = DEFINITIONAL_REPRESENTATION('',(#1612),#1616);+#1612 = LINE('',#1613,#1614);+#1613 = CARTESIAN_POINT('',(2.25,4.5225));+#1614 = VECTOR('',#1615,1.);+#1615 = DIRECTION('',(-1.,-1.859989286E-19));+#1616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1617 = PCURVE('',#1618,#1623);+#1618 = PLANE('',#1619);+#1619 = AXIS2_PLACEMENT_3D('',#1620,#1621,#1622);+#1620 = CARTESIAN_POINT('',(2.42560961319,-2.11,0.548953137803));+#1621 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1622 = DIRECTION('',(0.,0.,1.));+#1623 = DEFINITIONAL_REPRESENTATION('',(#1624),#1628);+#1624 = LINE('',#1625,#1626);+#1625 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1626 = VECTOR('',#1627,1.);+#1627 = DIRECTION('',(0.,1.));+#1628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1629 = ORIENTED_EDGE('',*,*,#1630,.T.);+#1630 = EDGE_CURVE('',#1603,#1631,#1633,.T.);+#1631 = VERTEX_POINT('',#1632);+#1632 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#1633 = SURFACE_CURVE('',#1634,(#1638,#1645),.PCURVE_S1.);+#1634 = LINE('',#1635,#1636);+#1635 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1636 = VECTOR('',#1637,1.);+#1637 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1638 = PCURVE('',#1145,#1639);+#1639 = DEFINITIONAL_REPRESENTATION('',(#1640),#1644);+#1640 = LINE('',#1641,#1642);+#1641 = CARTESIAN_POINT('',(1.95,0.1375));+#1642 = VECTOR('',#1643,1.);+#1643 = DIRECTION('',(-1.859989286E-19,1.));+#1644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1645 = PCURVE('',#818,#1646);+#1646 = DEFINITIONAL_REPRESENTATION('',(#1647),#1651);+#1647 = LINE('',#1648,#1649);+#1648 = CARTESIAN_POINT('',(0.,0.));+#1649 = VECTOR('',#1650,1.);+#1650 = DIRECTION('',(1.,0.));+#1651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1652 = ORIENTED_EDGE('',*,*,#1653,.T.);+#1653 = EDGE_CURVE('',#1631,#1654,#1656,.T.);+#1654 = VERTEX_POINT('',#1655);+#1655 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#1656 = SURFACE_CURVE('',#1657,(#1661,#1668),.PCURVE_S1.);+#1657 = LINE('',#1658,#1659);+#1658 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#1659 = VECTOR('',#1660,1.);+#1660 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1661 = PCURVE('',#1145,#1662);+#1662 = DEFINITIONAL_REPRESENTATION('',(#1663),#1667);+#1663 = LINE('',#1664,#1665);+#1664 = CARTESIAN_POINT('',(1.95,4.6875));+#1665 = VECTOR('',#1666,1.);+#1666 = DIRECTION('',(-0.707106781187,0.707106781187));+#1667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1668 = PCURVE('',#739,#1669);+#1669 = DEFINITIONAL_REPRESENTATION('',(#1670),#1674);+#1670 = LINE('',#1671,#1672);+#1671 = CARTESIAN_POINT('',(0.,0.));+#1672 = VECTOR('',#1673,1.);+#1673 = DIRECTION('',(1.,0.));+#1674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1675 = ORIENTED_EDGE('',*,*,#1676,.T.);+#1676 = EDGE_CURVE('',#1654,#1677,#1679,.T.);+#1677 = VERTEX_POINT('',#1678);+#1678 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#1679 = SURFACE_CURVE('',#1680,(#1684,#1691),.PCURVE_S1.);+#1680 = LINE('',#1681,#1682);+#1681 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#1682 = VECTOR('',#1683,1.);+#1683 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1684 = PCURVE('',#1145,#1685);+#1685 = DEFINITIONAL_REPRESENTATION('',(#1686),#1690);+#1686 = LINE('',#1687,#1688);+#1687 = CARTESIAN_POINT('',(1.775,4.8625));+#1688 = VECTOR('',#1689,1.);+#1689 = DIRECTION('',(-1.,-1.859989286E-19));+#1690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1691 = PCURVE('',#660,#1692);+#1692 = DEFINITIONAL_REPRESENTATION('',(#1693),#1697);+#1693 = LINE('',#1694,#1695);+#1694 = CARTESIAN_POINT('',(0.,0.));+#1695 = VECTOR('',#1696,1.);+#1696 = DIRECTION('',(1.,0.));+#1697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1698 = ORIENTED_EDGE('',*,*,#1699,.T.);+#1699 = EDGE_CURVE('',#1677,#1700,#1702,.T.);+#1700 = VERTEX_POINT('',#1701);+#1701 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1702 = SURFACE_CURVE('',#1703,(#1707,#1714),.PCURVE_S1.);+#1703 = LINE('',#1704,#1705);+#1704 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#1705 = VECTOR('',#1706,1.);+#1706 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1707 = PCURVE('',#1145,#1708);+#1708 = DEFINITIONAL_REPRESENTATION('',(#1709),#1713);+#1709 = LINE('',#1710,#1711);+#1710 = CARTESIAN_POINT('',(-1.775,4.8625));+#1711 = VECTOR('',#1712,1.);+#1712 = DIRECTION('',(-0.707106781187,-0.707106781187));+#1713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1714 = PCURVE('',#581,#1715);+#1715 = DEFINITIONAL_REPRESENTATION('',(#1716),#1720);+#1716 = LINE('',#1717,#1718);+#1717 = CARTESIAN_POINT('',(0.,0.));+#1718 = VECTOR('',#1719,1.);+#1719 = DIRECTION('',(1.,0.));+#1720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1721 = ORIENTED_EDGE('',*,*,#1722,.T.);+#1722 = EDGE_CURVE('',#1700,#1723,#1725,.T.);+#1723 = VERTEX_POINT('',#1724);+#1724 = CARTESIAN_POINT('',(-1.95,-2.11,1.025));+#1725 = SURFACE_CURVE('',#1726,(#1730,#1737),.PCURVE_S1.);+#1726 = LINE('',#1727,#1728);+#1727 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1728 = VECTOR('',#1729,1.);+#1729 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1730 = PCURVE('',#1145,#1731);+#1731 = DEFINITIONAL_REPRESENTATION('',(#1732),#1736);+#1732 = LINE('',#1733,#1734);+#1733 = CARTESIAN_POINT('',(-1.95,4.6875));+#1734 = VECTOR('',#1735,1.);+#1735 = DIRECTION('',(1.859989286E-19,-1.));+#1736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1737 = PCURVE('',#502,#1738);+#1738 = DEFINITIONAL_REPRESENTATION('',(#1739),#1743);+#1739 = LINE('',#1740,#1741);+#1740 = CARTESIAN_POINT('',(0.,0.));+#1741 = VECTOR('',#1742,1.);+#1742 = DIRECTION('',(1.,0.));+#1743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1744 = ORIENTED_EDGE('',*,*,#1745,.F.);+#1745 = EDGE_CURVE('',#1746,#1723,#1748,.T.);+#1746 = VERTEX_POINT('',#1747);+#1747 = CARTESIAN_POINT('',(-2.25,-2.11,1.025));+#1748 = SURFACE_CURVE('',#1749,(#1753,#1760),.PCURVE_S1.);+#1749 = LINE('',#1750,#1751);+#1750 = CARTESIAN_POINT('',(-2.25,-2.11,1.025));+#1751 = VECTOR('',#1752,1.);+#1752 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1753 = PCURVE('',#1145,#1754);+#1754 = DEFINITIONAL_REPRESENTATION('',(#1755),#1759);+#1755 = LINE('',#1756,#1757);+#1756 = CARTESIAN_POINT('',(-2.25,4.5225));+#1757 = VECTOR('',#1758,1.);+#1758 = DIRECTION('',(1.,1.226506788433E-16));+#1759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1760 = PCURVE('',#1761,#1766);+#1761 = PLANE('',#1762);+#1762 = AXIS2_PLACEMENT_3D('',#1763,#1764,#1765);+#1763 = CARTESIAN_POINT('',(-2.42560961319,-2.11,0.548953137803));+#1764 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1765 = DIRECTION('',(0.,-0.,1.));+#1766 = DEFINITIONAL_REPRESENTATION('',(#1767),#1771);+#1767 = LINE('',#1768,#1769);+#1768 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1769 = VECTOR('',#1770,1.);+#1770 = DIRECTION('',(0.,1.));+#1771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1772 = ORIENTED_EDGE('',*,*,#1773,.T.);+#1773 = EDGE_CURVE('',#1746,#1774,#1776,.T.);+#1774 = VERTEX_POINT('',#1775);+#1775 = CARTESIAN_POINT('',(-2.25,-1.7,1.025));+#1776 = SURFACE_CURVE('',#1777,(#1781,#1788),.PCURVE_S1.);+#1777 = LINE('',#1778,#1779);+#1778 = CARTESIAN_POINT('',(-2.25,-2.11,1.025));+#1779 = VECTOR('',#1780,1.);+#1780 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1781 = PCURVE('',#1145,#1782);+#1782 = DEFINITIONAL_REPRESENTATION('',(#1783),#1787);+#1783 = LINE('',#1784,#1785);+#1784 = CARTESIAN_POINT('',(-2.25,4.5225));+#1785 = VECTOR('',#1786,1.);+#1786 = DIRECTION('',(1.226506788433E-16,-1.));+#1787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1788 = PCURVE('',#1789,#1794);+#1789 = CYLINDRICAL_SURFACE('',#1790,0.3);+#1790 = AXIS2_PLACEMENT_3D('',#1791,#1792,#1793);+#1791 = CARTESIAN_POINT('',(-2.25,-2.11,0.725));+#1792 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1793 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1794 = DEFINITIONAL_REPRESENTATION('',(#1795),#1799);+#1795 = LINE('',#1796,#1797);+#1796 = CARTESIAN_POINT('',(4.886921905584,0.));+#1797 = VECTOR('',#1798,1.);+#1798 = DIRECTION('',(0.,-1.));+#1799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1800 = ORIENTED_EDGE('',*,*,#1801,.T.);+#1801 = EDGE_CURVE('',#1774,#1802,#1804,.T.);+#1802 = VERTEX_POINT('',#1803);+#1803 = CARTESIAN_POINT('',(-1.95,-1.7,1.025));+#1804 = SURFACE_CURVE('',#1805,(#1809,#1816),.PCURVE_S1.);+#1805 = LINE('',#1806,#1807);+#1806 = CARTESIAN_POINT('',(-2.25,-1.7,1.025));+#1807 = VECTOR('',#1808,1.);+#1808 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1809 = PCURVE('',#1145,#1810);+#1810 = DEFINITIONAL_REPRESENTATION('',(#1811),#1815);+#1811 = LINE('',#1812,#1813);+#1812 = CARTESIAN_POINT('',(-2.25,4.1125));+#1813 = VECTOR('',#1814,1.);+#1814 = DIRECTION('',(1.,1.226506788433E-16));+#1815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1816 = PCURVE('',#1817,#1822);+#1817 = PLANE('',#1818);+#1818 = AXIS2_PLACEMENT_3D('',#1819,#1820,#1821);+#1819 = CARTESIAN_POINT('',(-2.42560961319,-1.7,0.548953137803));+#1820 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1821 = DIRECTION('',(0.,-0.,1.));+#1822 = DEFINITIONAL_REPRESENTATION('',(#1823),#1827);+#1823 = LINE('',#1824,#1825);+#1824 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1825 = VECTOR('',#1826,1.);+#1826 = DIRECTION('',(0.,1.));+#1827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1828 = ORIENTED_EDGE('',*,*,#1829,.T.);+#1829 = EDGE_CURVE('',#1802,#1830,#1832,.T.);+#1830 = VERTEX_POINT('',#1831);+#1831 = CARTESIAN_POINT('',(-1.95,-0.84,1.025));+#1832 = SURFACE_CURVE('',#1833,(#1837,#1844),.PCURVE_S1.);+#1833 = LINE('',#1834,#1835);+#1834 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1835 = VECTOR('',#1836,1.);+#1836 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1837 = PCURVE('',#1145,#1838);+#1838 = DEFINITIONAL_REPRESENTATION('',(#1839),#1843);+#1839 = LINE('',#1840,#1841);+#1840 = CARTESIAN_POINT('',(-1.95,4.6875));+#1841 = VECTOR('',#1842,1.);+#1842 = DIRECTION('',(1.859989286E-19,-1.));+#1843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1844 = PCURVE('',#446,#1845);+#1845 = DEFINITIONAL_REPRESENTATION('',(#1846),#1850);+#1846 = LINE('',#1847,#1848);+#1847 = CARTESIAN_POINT('',(0.,0.));+#1848 = VECTOR('',#1849,1.);+#1849 = DIRECTION('',(1.,0.));+#1850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1851 = ORIENTED_EDGE('',*,*,#1852,.F.);+#1852 = EDGE_CURVE('',#1853,#1830,#1855,.T.);+#1853 = VERTEX_POINT('',#1854);+#1854 = CARTESIAN_POINT('',(-2.25,-0.84,1.025));+#1855 = SURFACE_CURVE('',#1856,(#1860,#1867),.PCURVE_S1.);+#1856 = LINE('',#1857,#1858);+#1857 = CARTESIAN_POINT('',(-2.25,-0.84,1.025));+#1858 = VECTOR('',#1859,1.);+#1859 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1860 = PCURVE('',#1145,#1861);+#1861 = DEFINITIONAL_REPRESENTATION('',(#1862),#1866);+#1862 = LINE('',#1863,#1864);+#1863 = CARTESIAN_POINT('',(-2.25,3.2525));+#1864 = VECTOR('',#1865,1.);+#1865 = DIRECTION('',(1.,1.226506788433E-16));+#1866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1867 = PCURVE('',#1868,#1873);+#1868 = PLANE('',#1869);+#1869 = AXIS2_PLACEMENT_3D('',#1870,#1871,#1872);+#1870 = CARTESIAN_POINT('',(-2.42560961319,-0.84,0.548953137803));+#1871 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1872 = DIRECTION('',(0.,-0.,1.));+#1873 = DEFINITIONAL_REPRESENTATION('',(#1874),#1878);+#1874 = LINE('',#1875,#1876);+#1875 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1876 = VECTOR('',#1877,1.);+#1877 = DIRECTION('',(0.,1.));+#1878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1879 = ORIENTED_EDGE('',*,*,#1880,.T.);+#1880 = EDGE_CURVE('',#1853,#1881,#1883,.T.);+#1881 = VERTEX_POINT('',#1882);+#1882 = CARTESIAN_POINT('',(-2.25,-0.43,1.025));+#1883 = SURFACE_CURVE('',#1884,(#1888,#1895),.PCURVE_S1.);+#1884 = LINE('',#1885,#1886);+#1885 = CARTESIAN_POINT('',(-2.25,-0.84,1.025));+#1886 = VECTOR('',#1887,1.);+#1887 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1888 = PCURVE('',#1145,#1889);+#1889 = DEFINITIONAL_REPRESENTATION('',(#1890),#1894);+#1890 = LINE('',#1891,#1892);+#1891 = CARTESIAN_POINT('',(-2.25,3.2525));+#1892 = VECTOR('',#1893,1.);+#1893 = DIRECTION('',(1.226506788433E-16,-1.));+#1894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1895 = PCURVE('',#1896,#1901);+#1896 = CYLINDRICAL_SURFACE('',#1897,0.3);+#1897 = AXIS2_PLACEMENT_3D('',#1898,#1899,#1900);+#1898 = CARTESIAN_POINT('',(-2.25,-0.84,0.725));+#1899 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1900 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1901 = DEFINITIONAL_REPRESENTATION('',(#1902),#1906);+#1902 = LINE('',#1903,#1904);+#1903 = CARTESIAN_POINT('',(4.886921905584,0.));+#1904 = VECTOR('',#1905,1.);+#1905 = DIRECTION('',(0.,-1.));+#1906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1907 = ORIENTED_EDGE('',*,*,#1908,.T.);+#1908 = EDGE_CURVE('',#1881,#1909,#1911,.T.);+#1909 = VERTEX_POINT('',#1910);+#1910 = CARTESIAN_POINT('',(-1.95,-0.43,1.025));+#1911 = SURFACE_CURVE('',#1912,(#1916,#1923),.PCURVE_S1.);+#1912 = LINE('',#1913,#1914);+#1913 = CARTESIAN_POINT('',(-2.25,-0.43,1.025));+#1914 = VECTOR('',#1915,1.);+#1915 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1916 = PCURVE('',#1145,#1917);+#1917 = DEFINITIONAL_REPRESENTATION('',(#1918),#1922);+#1918 = LINE('',#1919,#1920);+#1919 = CARTESIAN_POINT('',(-2.25,2.8425));+#1920 = VECTOR('',#1921,1.);+#1921 = DIRECTION('',(1.,1.226506788433E-16));+#1922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1923 = PCURVE('',#1924,#1929);+#1924 = PLANE('',#1925);+#1925 = AXIS2_PLACEMENT_3D('',#1926,#1927,#1928);+#1926 = CARTESIAN_POINT('',(-2.42560961319,-0.43,0.548953137803));+#1927 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1928 = DIRECTION('',(0.,-0.,1.));+#1929 = DEFINITIONAL_REPRESENTATION('',(#1930),#1934);+#1930 = LINE('',#1931,#1932);+#1931 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1932 = VECTOR('',#1933,1.);+#1933 = DIRECTION('',(0.,1.));+#1934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1935 = ORIENTED_EDGE('',*,*,#1936,.T.);+#1936 = EDGE_CURVE('',#1909,#1937,#1939,.T.);+#1937 = VERTEX_POINT('',#1938);+#1938 = CARTESIAN_POINT('',(-1.95,0.43,1.025));+#1939 = SURFACE_CURVE('',#1940,(#1944,#1951),.PCURVE_S1.);+#1940 = LINE('',#1941,#1942);+#1941 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1942 = VECTOR('',#1943,1.);+#1943 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1944 = PCURVE('',#1145,#1945);+#1945 = DEFINITIONAL_REPRESENTATION('',(#1946),#1950);+#1946 = LINE('',#1947,#1948);+#1947 = CARTESIAN_POINT('',(-1.95,4.6875));+#1948 = VECTOR('',#1949,1.);+#1949 = DIRECTION('',(1.859989286E-19,-1.));+#1950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1951 = PCURVE('',#390,#1952);+#1952 = DEFINITIONAL_REPRESENTATION('',(#1953),#1957);+#1953 = LINE('',#1954,#1955);+#1954 = CARTESIAN_POINT('',(0.,0.));+#1955 = VECTOR('',#1956,1.);+#1956 = DIRECTION('',(1.,0.));+#1957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1958 = ORIENTED_EDGE('',*,*,#1959,.F.);+#1959 = EDGE_CURVE('',#1960,#1937,#1962,.T.);+#1960 = VERTEX_POINT('',#1961);+#1961 = CARTESIAN_POINT('',(-2.25,0.43,1.025));+#1962 = SURFACE_CURVE('',#1963,(#1967,#1974),.PCURVE_S1.);+#1963 = LINE('',#1964,#1965);+#1964 = CARTESIAN_POINT('',(-2.25,0.43,1.025));+#1965 = VECTOR('',#1966,1.);+#1966 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1967 = PCURVE('',#1145,#1968);+#1968 = DEFINITIONAL_REPRESENTATION('',(#1969),#1973);+#1969 = LINE('',#1970,#1971);+#1970 = CARTESIAN_POINT('',(-2.25,1.9825));+#1971 = VECTOR('',#1972,1.);+#1972 = DIRECTION('',(1.,1.226506788433E-16));+#1973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1974 = PCURVE('',#1975,#1980);+#1975 = PLANE('',#1976);+#1976 = AXIS2_PLACEMENT_3D('',#1977,#1978,#1979);+#1977 = CARTESIAN_POINT('',(-2.42560961319,0.43,0.548953137803));+#1978 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1979 = DIRECTION('',(0.,-0.,1.));+#1980 = DEFINITIONAL_REPRESENTATION('',(#1981),#1985);+#1981 = LINE('',#1982,#1983);+#1982 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1983 = VECTOR('',#1984,1.);+#1984 = DIRECTION('',(0.,1.));+#1985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1986 = ORIENTED_EDGE('',*,*,#1987,.T.);+#1987 = EDGE_CURVE('',#1960,#1988,#1990,.T.);+#1988 = VERTEX_POINT('',#1989);+#1989 = CARTESIAN_POINT('',(-2.25,0.84,1.025));+#1990 = SURFACE_CURVE('',#1991,(#1995,#2002),.PCURVE_S1.);+#1991 = LINE('',#1992,#1993);+#1992 = CARTESIAN_POINT('',(-2.25,0.43,1.025));+#1993 = VECTOR('',#1994,1.);+#1994 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1995 = PCURVE('',#1145,#1996);+#1996 = DEFINITIONAL_REPRESENTATION('',(#1997),#2001);+#1997 = LINE('',#1998,#1999);+#1998 = CARTESIAN_POINT('',(-2.25,1.9825));+#1999 = VECTOR('',#2000,1.);+#2000 = DIRECTION('',(1.226506788433E-16,-1.));+#2001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2002 = PCURVE('',#2003,#2008);+#2003 = CYLINDRICAL_SURFACE('',#2004,0.3);+#2004 = AXIS2_PLACEMENT_3D('',#2005,#2006,#2007);+#2005 = CARTESIAN_POINT('',(-2.25,0.43,0.725));+#2006 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2007 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2008 = DEFINITIONAL_REPRESENTATION('',(#2009),#2013);+#2009 = LINE('',#2010,#2011);+#2010 = CARTESIAN_POINT('',(4.886921905584,0.));+#2011 = VECTOR('',#2012,1.);+#2012 = DIRECTION('',(0.,-1.));+#2013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2014 = ORIENTED_EDGE('',*,*,#2015,.T.);+#2015 = EDGE_CURVE('',#1988,#2016,#2018,.T.);+#2016 = VERTEX_POINT('',#2017);+#2017 = CARTESIAN_POINT('',(-1.95,0.84,1.025));+#2018 = SURFACE_CURVE('',#2019,(#2023,#2030),.PCURVE_S1.);+#2019 = LINE('',#2020,#2021);+#2020 = CARTESIAN_POINT('',(-2.25,0.84,1.025));+#2021 = VECTOR('',#2022,1.);+#2022 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2023 = PCURVE('',#1145,#2024);+#2024 = DEFINITIONAL_REPRESENTATION('',(#2025),#2029);+#2025 = LINE('',#2026,#2027);+#2026 = CARTESIAN_POINT('',(-2.25,1.5725));+#2027 = VECTOR('',#2028,1.);+#2028 = DIRECTION('',(1.,1.226506788433E-16));+#2029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2030 = PCURVE('',#2031,#2036);+#2031 = PLANE('',#2032);+#2032 = AXIS2_PLACEMENT_3D('',#2033,#2034,#2035);+#2033 = CARTESIAN_POINT('',(-2.42560961319,0.84,0.548953137803));+#2034 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2035 = DIRECTION('',(0.,-0.,1.));+#2036 = DEFINITIONAL_REPRESENTATION('',(#2037),#2041);+#2037 = LINE('',#2038,#2039);+#2038 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#2039 = VECTOR('',#2040,1.);+#2040 = DIRECTION('',(0.,1.));+#2041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2042 = ORIENTED_EDGE('',*,*,#2043,.T.);+#2043 = EDGE_CURVE('',#2016,#2044,#2046,.T.);+#2044 = VERTEX_POINT('',#2045);+#2045 = CARTESIAN_POINT('',(-1.95,1.7,1.025));+#2046 = SURFACE_CURVE('',#2047,(#2051,#2058),.PCURVE_S1.);+#2047 = LINE('',#2048,#2049);+#2048 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#2049 = VECTOR('',#2050,1.);+#2050 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2051 = PCURVE('',#1145,#2052);+#2052 = DEFINITIONAL_REPRESENTATION('',(#2053),#2057);+#2053 = LINE('',#2054,#2055);+#2054 = CARTESIAN_POINT('',(-1.95,4.6875));+#2055 = VECTOR('',#2056,1.);+#2056 = DIRECTION('',(1.859989286E-19,-1.));+#2057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2058 = PCURVE('',#334,#2059);+#2059 = DEFINITIONAL_REPRESENTATION('',(#2060),#2064);+#2060 = LINE('',#2061,#2062);+#2061 = CARTESIAN_POINT('',(0.,0.));+#2062 = VECTOR('',#2063,1.);+#2063 = DIRECTION('',(1.,0.));+#2064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2065 = ORIENTED_EDGE('',*,*,#2066,.F.);+#2066 = EDGE_CURVE('',#2067,#2044,#2069,.T.);+#2067 = VERTEX_POINT('',#2068);+#2068 = CARTESIAN_POINT('',(-2.25,1.7,1.025));+#2069 = SURFACE_CURVE('',#2070,(#2074,#2081),.PCURVE_S1.);+#2070 = LINE('',#2071,#2072);+#2071 = CARTESIAN_POINT('',(-2.25,1.7,1.025));+#2072 = VECTOR('',#2073,1.);+#2073 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2074 = PCURVE('',#1145,#2075);+#2075 = DEFINITIONAL_REPRESENTATION('',(#2076),#2080);+#2076 = LINE('',#2077,#2078);+#2077 = CARTESIAN_POINT('',(-2.25,0.7125));+#2078 = VECTOR('',#2079,1.);+#2079 = DIRECTION('',(1.,1.226506788433E-16));+#2080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2081 = PCURVE('',#2082,#2087);+#2082 = PLANE('',#2083);+#2083 = AXIS2_PLACEMENT_3D('',#2084,#2085,#2086);+#2084 = CARTESIAN_POINT('',(-2.42560961319,1.7,0.548953137803));+#2085 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2086 = DIRECTION('',(0.,-0.,1.));+#2087 = DEFINITIONAL_REPRESENTATION('',(#2088),#2092);+#2088 = LINE('',#2089,#2090);+#2089 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#2090 = VECTOR('',#2091,1.);+#2091 = DIRECTION('',(0.,1.));+#2092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2093 = ORIENTED_EDGE('',*,*,#2094,.T.);+#2094 = EDGE_CURVE('',#2067,#2095,#2097,.T.);+#2095 = VERTEX_POINT('',#2096);+#2096 = CARTESIAN_POINT('',(-2.25,2.11,1.025));+#2097 = SURFACE_CURVE('',#2098,(#2102,#2109),.PCURVE_S1.);+#2098 = LINE('',#2099,#2100);+#2099 = CARTESIAN_POINT('',(-2.25,1.7,1.025));+#2100 = VECTOR('',#2101,1.);+#2101 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2102 = PCURVE('',#1145,#2103);+#2103 = DEFINITIONAL_REPRESENTATION('',(#2104),#2108);+#2104 = LINE('',#2105,#2106);+#2105 = CARTESIAN_POINT('',(-2.25,0.7125));+#2106 = VECTOR('',#2107,1.);+#2107 = DIRECTION('',(1.226506788433E-16,-1.));+#2108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2109 = PCURVE('',#2110,#2115);+#2110 = CYLINDRICAL_SURFACE('',#2111,0.3);+#2111 = AXIS2_PLACEMENT_3D('',#2112,#2113,#2114);+#2112 = CARTESIAN_POINT('',(-2.25,1.7,0.725));+#2113 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2114 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2115 = DEFINITIONAL_REPRESENTATION('',(#2116),#2120);+#2116 = LINE('',#2117,#2118);+#2117 = CARTESIAN_POINT('',(4.886921905584,0.));+#2118 = VECTOR('',#2119,1.);+#2119 = DIRECTION('',(0.,-1.));+#2120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2121 = ORIENTED_EDGE('',*,*,#2122,.T.);+#2122 = EDGE_CURVE('',#2095,#2123,#2125,.T.);+#2123 = VERTEX_POINT('',#2124);+#2124 = CARTESIAN_POINT('',(-1.95,2.11,1.025));+#2125 = SURFACE_CURVE('',#2126,(#2130,#2137),.PCURVE_S1.);+#2126 = LINE('',#2127,#2128);+#2127 = CARTESIAN_POINT('',(-2.25,2.11,1.025));+#2128 = VECTOR('',#2129,1.);+#2129 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2130 = PCURVE('',#1145,#2131);+#2131 = DEFINITIONAL_REPRESENTATION('',(#2132),#2136);+#2132 = LINE('',#2133,#2134);+#2133 = CARTESIAN_POINT('',(-2.25,0.3025));+#2134 = VECTOR('',#2135,1.);+#2135 = DIRECTION('',(1.,1.226506788433E-16));+#2136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2137 = PCURVE('',#2138,#2143);+#2138 = PLANE('',#2139);+#2139 = AXIS2_PLACEMENT_3D('',#2140,#2141,#2142);+#2140 = CARTESIAN_POINT('',(-2.42560961319,2.11,0.548953137803));+#2141 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2142 = DIRECTION('',(0.,-0.,1.));+#2143 = DEFINITIONAL_REPRESENTATION('',(#2144),#2148);+#2144 = LINE('',#2145,#2146);+#2145 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#2146 = VECTOR('',#2147,1.);+#2147 = DIRECTION('',(0.,1.));+#2148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2149 = ORIENTED_EDGE('',*,*,#2150,.T.);+#2150 = EDGE_CURVE('',#2123,#1161,#2151,.T.);+#2151 = SURFACE_CURVE('',#2152,(#2156,#2163),.PCURVE_S1.);+#2152 = LINE('',#2153,#2154);+#2153 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#2154 = VECTOR('',#2155,1.);+#2155 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2156 = PCURVE('',#1145,#2157);+#2157 = DEFINITIONAL_REPRESENTATION('',(#2158),#2162);+#2158 = LINE('',#2159,#2160);+#2159 = CARTESIAN_POINT('',(-1.95,4.6875));+#2160 = VECTOR('',#2161,1.);+#2161 = DIRECTION('',(1.859989286E-19,-1.));+#2162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2163 = PCURVE('',#278,#2164);+#2164 = DEFINITIONAL_REPRESENTATION('',(#2165),#2169);+#2165 = LINE('',#2166,#2167);+#2166 = CARTESIAN_POINT('',(0.,0.));+#2167 = VECTOR('',#2168,1.);+#2168 = DIRECTION('',(1.,0.));+#2169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2170 = FACE_BOUND('',#2171,.F.);+#2171 = EDGE_LOOP('',(#2172,#2202,#2230,#2258,#2286,#2314,#2342,#2370));+#2172 = ORIENTED_EDGE('',*,*,#2173,.F.);+#2173 = EDGE_CURVE('',#2174,#2176,#2178,.T.);+#2174 = VERTEX_POINT('',#2175);+#2175 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2176 = VERTEX_POINT('',#2177);+#2177 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2178 = SURFACE_CURVE('',#2179,(#2183,#2190),.PCURVE_S1.);+#2179 = LINE('',#2180,#2181);+#2180 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2181 = VECTOR('',#2182,1.);+#2182 = DIRECTION('',(0.,-1.,0.));+#2183 = PCURVE('',#1145,#2184);+#2184 = DEFINITIONAL_REPRESENTATION('',(#2185),#2189);+#2185 = LINE('',#2186,#2187);+#2186 = CARTESIAN_POINT('',(1.875,0.175));+#2187 = VECTOR('',#2188,1.);+#2188 = DIRECTION('',(-1.112083013911E-16,1.));+#2189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2190 = PCURVE('',#2191,#2196);+#2191 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2192,#2193)+ ,(#2194,#2195+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2192 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2193 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2194 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2195 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2196 = DEFINITIONAL_REPRESENTATION('',(#2197),#2201);+#2197 = LINE('',#2198,#2199);+#2198 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#2199 = VECTOR('',#2200,1.);+#2200 = DIRECTION('',(1.,-8.164441876029E-16));+#2201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2202 = ORIENTED_EDGE('',*,*,#2203,.F.);+#2203 = EDGE_CURVE('',#2204,#2174,#2206,.T.);+#2204 = VERTEX_POINT('',#2205);+#2205 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2206 = SURFACE_CURVE('',#2207,(#2211,#2218),.PCURVE_S1.);+#2207 = LINE('',#2208,#2209);+#2208 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2209 = VECTOR('',#2210,1.);+#2210 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2211 = PCURVE('',#1145,#2212);+#2212 = DEFINITIONAL_REPRESENTATION('',(#2213),#2217);+#2213 = LINE('',#2214,#2215);+#2214 = CARTESIAN_POINT('',(1.7375,3.75E-02));+#2215 = VECTOR('',#2216,1.);+#2216 = DIRECTION('',(0.707106781187,0.707106781187));+#2217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2218 = PCURVE('',#2219,#2224);+#2219 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2220,#2221)+ ,(#2222,#2223+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2220 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2221 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2222 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2223 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2224 = DEFINITIONAL_REPRESENTATION('',(#2225),#2229);+#2225 = LINE('',#2226,#2227);+#2226 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#2227 = VECTOR('',#2228,1.);+#2228 = DIRECTION('',(1.,-5.460298955199E-16));+#2229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2230 = ORIENTED_EDGE('',*,*,#2231,.F.);+#2231 = EDGE_CURVE('',#2232,#2204,#2234,.T.);+#2232 = VERTEX_POINT('',#2233);+#2233 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2234 = SURFACE_CURVE('',#2235,(#2239,#2246),.PCURVE_S1.);+#2235 = LINE('',#2236,#2237);+#2236 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2237 = VECTOR('',#2238,1.);+#2238 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2239 = PCURVE('',#1145,#2240);+#2240 = DEFINITIONAL_REPRESENTATION('',(#2241),#2245);+#2241 = LINE('',#2242,#2243);+#2242 = CARTESIAN_POINT('',(-1.7375,3.75E-02));+#2243 = VECTOR('',#2244,1.);+#2244 = DIRECTION('',(1.,1.859989286E-19));+#2245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2246 = PCURVE('',#2247,#2252);+#2247 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2248,#2249)+ ,(#2250,#2251+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2248 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2249 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2250 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2251 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2252 = DEFINITIONAL_REPRESENTATION('',(#2253),#2257);+#2253 = LINE('',#2254,#2255);+#2254 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#2255 = VECTOR('',#2256,1.);+#2256 = DIRECTION('',(1.,-5.447280452419E-17));+#2257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2258 = ORIENTED_EDGE('',*,*,#2259,.F.);+#2259 = EDGE_CURVE('',#2260,#2232,#2262,.T.);+#2260 = VERTEX_POINT('',#2261);+#2261 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2262 = SURFACE_CURVE('',#2263,(#2267,#2274),.PCURVE_S1.);+#2263 = LINE('',#2264,#2265);+#2264 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2265 = VECTOR('',#2266,1.);+#2266 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2267 = PCURVE('',#1145,#2268);+#2268 = DEFINITIONAL_REPRESENTATION('',(#2269),#2273);+#2269 = LINE('',#2270,#2271);+#2270 = CARTESIAN_POINT('',(-1.875,0.175));+#2271 = VECTOR('',#2272,1.);+#2272 = DIRECTION('',(0.707106781187,-0.707106781187));+#2273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2274 = PCURVE('',#2275,#2280);+#2275 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2276,#2277)+ ,(#2278,#2279+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2276 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2277 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2278 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2279 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2280 = DEFINITIONAL_REPRESENTATION('',(#2281),#2285);+#2281 = LINE('',#2282,#2283);+#2282 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#2283 = VECTOR('',#2284,1.);+#2284 = DIRECTION('',(1.,3.638625729945E-16));+#2285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2286 = ORIENTED_EDGE('',*,*,#2287,.F.);+#2287 = EDGE_CURVE('',#2288,#2260,#2290,.T.);+#2288 = VERTEX_POINT('',#2289);+#2289 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2290 = SURFACE_CURVE('',#2291,(#2295,#2302),.PCURVE_S1.);+#2291 = LINE('',#2292,#2293);+#2292 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2293 = VECTOR('',#2294,1.);+#2294 = DIRECTION('',(0.,1.,0.));+#2295 = PCURVE('',#1145,#2296);+#2296 = DEFINITIONAL_REPRESENTATION('',(#2297),#2301);+#2297 = LINE('',#2298,#2299);+#2298 = CARTESIAN_POINT('',(-1.875,4.65));+#2299 = VECTOR('',#2300,1.);+#2300 = DIRECTION('',(1.112083013911E-16,-1.));+#2301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2302 = PCURVE('',#2303,#2308);+#2303 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2304,#2305)+ ,(#2306,#2307+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2304 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2305 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2306 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2307 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2308 = DEFINITIONAL_REPRESENTATION('',(#2309),#2313);+#2309 = LINE('',#2310,#2311);+#2310 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#2311 = VECTOR('',#2312,1.);+#2312 = DIRECTION('',(1.,-8.164441876029E-16));+#2313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2314 = ORIENTED_EDGE('',*,*,#2315,.F.);+#2315 = EDGE_CURVE('',#2316,#2288,#2318,.T.);+#2316 = VERTEX_POINT('',#2317);+#2317 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2318 = SURFACE_CURVE('',#2319,(#2323,#2330),.PCURVE_S1.);+#2319 = LINE('',#2320,#2321);+#2320 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2321 = VECTOR('',#2322,1.);+#2322 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2323 = PCURVE('',#1145,#2324);+#2324 = DEFINITIONAL_REPRESENTATION('',(#2325),#2329);+#2325 = LINE('',#2326,#2327);+#2326 = CARTESIAN_POINT('',(-1.7375,4.7875));+#2327 = VECTOR('',#2328,1.);+#2328 = DIRECTION('',(-0.707106781187,-0.707106781187));+#2329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2330 = PCURVE('',#2331,#2336);+#2331 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2332,#2333)+ ,(#2334,#2335+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2332 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2333 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2334 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2335 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2336 = DEFINITIONAL_REPRESENTATION('',(#2337),#2341);+#2337 = LINE('',#2338,#2339);+#2338 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#2339 = VECTOR('',#2340,1.);+#2340 = DIRECTION('',(1.,-5.460298955199E-16));+#2341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2342 = ORIENTED_EDGE('',*,*,#2343,.F.);+#2343 = EDGE_CURVE('',#2344,#2316,#2346,.T.);+#2344 = VERTEX_POINT('',#2345);+#2345 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2346 = SURFACE_CURVE('',#2347,(#2351,#2358),.PCURVE_S1.);+#2347 = LINE('',#2348,#2349);+#2348 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2349 = VECTOR('',#2350,1.);+#2350 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2351 = PCURVE('',#1145,#2352);+#2352 = DEFINITIONAL_REPRESENTATION('',(#2353),#2357);+#2353 = LINE('',#2354,#2355);+#2354 = CARTESIAN_POINT('',(1.7375,4.7875));+#2355 = VECTOR('',#2356,1.);+#2356 = DIRECTION('',(-1.,-1.859989286E-19));+#2357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2358 = PCURVE('',#2359,#2364);+#2359 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2360,#2361)+ ,(#2362,#2363+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2360 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2361 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2362 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2363 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2364 = DEFINITIONAL_REPRESENTATION('',(#2365),#2369);+#2365 = LINE('',#2366,#2367);+#2366 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#2367 = VECTOR('',#2368,1.);+#2368 = DIRECTION('',(1.,-5.447280452419E-17));+#2369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2370 = ORIENTED_EDGE('',*,*,#2371,.F.);+#2371 = EDGE_CURVE('',#2176,#2344,#2372,.T.);+#2372 = SURFACE_CURVE('',#2373,(#2377,#2384),.PCURVE_S1.);+#2373 = LINE('',#2374,#2375);+#2374 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2375 = VECTOR('',#2376,1.);+#2376 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2377 = PCURVE('',#1145,#2378);+#2378 = DEFINITIONAL_REPRESENTATION('',(#2379),#2383);+#2379 = LINE('',#2380,#2381);+#2380 = CARTESIAN_POINT('',(1.875,4.65));+#2381 = VECTOR('',#2382,1.);+#2382 = DIRECTION('',(-0.707106781187,0.707106781187));+#2383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2384 = PCURVE('',#2385,#2390);+#2385 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2386,#2387)+ ,(#2388,#2389+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2386 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2387 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2388 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2389 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2390 = DEFINITIONAL_REPRESENTATION('',(#2391),#2395);+#2391 = LINE('',#2392,#2393);+#2392 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#2393 = VECTOR('',#2394,1.);+#2394 = DIRECTION('',(1.,3.638625729945E-16));+#2395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2396 = ADVANCED_FACE('',(#2397),#2385,.F.);+#2397 = FACE_BOUND('',#2398,.F.);+#2398 = EDGE_LOOP('',(#2399,#2400,#2422,#2449));+#2399 = ORIENTED_EDGE('',*,*,#2371,.T.);+#2400 = ORIENTED_EDGE('',*,*,#2401,.T.);+#2401 = EDGE_CURVE('',#2344,#2402,#2404,.T.);+#2402 = VERTEX_POINT('',#2403);+#2403 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2404 = SURFACE_CURVE('',#2405,(#2408,#2415),.PCURVE_S1.);+#2405 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2406,#2407),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2406 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2407 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2408 = PCURVE('',#2385,#2409);+#2409 = DEFINITIONAL_REPRESENTATION('',(#2410),#2414);+#2410 = LINE('',#2411,#2412);+#2411 = CARTESIAN_POINT('',(0.194454364826,8.346321558809E-17));+#2412 = VECTOR('',#2413,1.);+#2413 = DIRECTION('',(-8.326672684689E-17,1.));+#2414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2415 = PCURVE('',#2359,#2416);+#2416 = DEFINITIONAL_REPRESENTATION('',(#2417),#2421);+#2417 = LINE('',#2418,#2419);+#2418 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#2419 = VECTOR('',#2420,1.);+#2420 = DIRECTION('',(2.060577736657E-16,1.));+#2421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2422 = ORIENTED_EDGE('',*,*,#2423,.F.);+#2423 = EDGE_CURVE('',#2424,#2402,#2426,.T.);+#2424 = VERTEX_POINT('',#2425);+#2425 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2426 = SURFACE_CURVE('',#2427,(#2431,#2437),.PCURVE_S1.);+#2427 = LINE('',#2428,#2429);+#2428 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2429 = VECTOR('',#2430,1.);+#2430 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2431 = PCURVE('',#2385,#2432);+#2432 = DEFINITIONAL_REPRESENTATION('',(#2433),#2436);+#2433 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2434,#2435),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2434 = CARTESIAN_POINT('',(-6.960457594574E-17,1.));+#2435 = CARTESIAN_POINT('',(0.194454364826,1.));+#2436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2437 = PCURVE('',#2438,#2443);+#2438 = PLANE('',#2439);+#2439 = AXIS2_PLACEMENT_3D('',#2440,#2441,#2442);+#2440 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2441 = DIRECTION('',(0.,0.,-1.));+#2442 = DIRECTION('',(0.596575959062,-0.802556617983,0.));+#2443 = DEFINITIONAL_REPRESENTATION('',(#2444),#2448);+#2444 = LINE('',#2445,#2446);+#2445 = CARTESIAN_POINT('',(5.615932149767,-0.112050428413));+#2446 = VECTOR('',#2447,1.);+#2447 = DIRECTION('',(0.145650320716,0.989336133008));+#2448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2449 = ORIENTED_EDGE('',*,*,#2450,.F.);+#2450 = EDGE_CURVE('',#2176,#2424,#2451,.T.);+#2451 = SURFACE_CURVE('',#2452,(#2455,#2462),.PCURVE_S1.);+#2452 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2453,#2454),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2453 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2454 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2455 = PCURVE('',#2385,#2456);+#2456 = DEFINITIONAL_REPRESENTATION('',(#2457),#2461);+#2457 = LINE('',#2458,#2459);+#2458 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#2459 = VECTOR('',#2460,1.);+#2460 = DIRECTION('',(3.933483957273E-16,1.));+#2461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2462 = PCURVE('',#2191,#2463);+#2463 = DEFINITIONAL_REPRESENTATION('',(#2464),#2468);+#2464 = LINE('',#2465,#2466);+#2465 = CARTESIAN_POINT('',(4.475,-2.841128830464E-17));+#2466 = VECTOR('',#2467,1.);+#2467 = DIRECTION('',(0.,1.));+#2468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2469 = ADVANCED_FACE('',(#2470,#2625,#3410,#4195,#4980,#5144),#2438,.F.+ );+#2470 = FACE_BOUND('',#2471,.F.);+#2471 = EDGE_LOOP('',(#2472,#2496,#2518,#2538,#2539,#2561,#2583,#2605));+#2472 = ORIENTED_EDGE('',*,*,#2473,.T.);+#2473 = EDGE_CURVE('',#2474,#2476,#2478,.T.);+#2474 = VERTEX_POINT('',#2475);+#2475 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2476 = VERTEX_POINT('',#2477);+#2477 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2478 = SURFACE_CURVE('',#2479,(#2483,#2490),.PCURVE_S1.);+#2479 = LINE('',#2480,#2481);+#2480 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2481 = VECTOR('',#2482,1.);+#2482 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2483 = PCURVE('',#2438,#2484);+#2484 = DEFINITIONAL_REPRESENTATION('',(#2485),#2489);+#2485 = LINE('',#2486,#2487);+#2486 = CARTESIAN_POINT('',(0.,-0.));+#2487 = VECTOR('',#2488,1.);+#2488 = DIRECTION('',(0.596575959062,-0.802556617983));+#2489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2490 = PCURVE('',#2247,#2491);+#2491 = DEFINITIONAL_REPRESENTATION('',(#2492),#2495);+#2492 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2493,#2494),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2493 = CARTESIAN_POINT('',(1.690560100251E-16,1.));+#2494 = CARTESIAN_POINT('',(3.475,1.));+#2495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2496 = ORIENTED_EDGE('',*,*,#2497,.T.);+#2497 = EDGE_CURVE('',#2476,#2498,#2500,.T.);+#2498 = VERTEX_POINT('',#2499);+#2499 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2500 = SURFACE_CURVE('',#2501,(#2505,#2512),.PCURVE_S1.);+#2501 = LINE('',#2502,#2503);+#2502 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2503 = VECTOR('',#2504,1.);+#2504 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2505 = PCURVE('',#2438,#2506);+#2506 = DEFINITIONAL_REPRESENTATION('',(#2507),#2511);+#2507 = LINE('',#2508,#2509);+#2508 = CARTESIAN_POINT('',(2.004597404435,-2.696727698935));+#2509 = VECTOR('',#2510,1.);+#2510 = DIRECTION('',(0.989336133008,-0.145650320716));+#2511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2512 = PCURVE('',#2219,#2513);+#2513 = DEFINITIONAL_REPRESENTATION('',(#2514),#2517);+#2514 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2515,#2516),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2515 = CARTESIAN_POINT('',(4.744280477712E-16,1.));+#2516 = CARTESIAN_POINT('',(0.194454364826,1.));+#2517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2518 = ORIENTED_EDGE('',*,*,#2519,.T.);+#2519 = EDGE_CURVE('',#2498,#2424,#2520,.T.);+#2520 = SURFACE_CURVE('',#2521,(#2525,#2532),.PCURVE_S1.);+#2521 = LINE('',#2522,#2523);+#2522 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2523 = VECTOR('',#2524,1.);+#2524 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2525 = PCURVE('',#2438,#2526);+#2526 = DEFINITIONAL_REPRESENTATION('',(#2527),#2531);+#2527 = LINE('',#2528,#2529);+#2528 = CARTESIAN_POINT('',(2.116647832849,-2.713223791911));+#2529 = VECTOR('',#2530,1.);+#2530 = DIRECTION('',(0.802556617983,0.596575959062));+#2531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2532 = PCURVE('',#2191,#2533);+#2533 = DEFINITIONAL_REPRESENTATION('',(#2534),#2537);+#2534 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2535,#2536),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,4.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2535 = CARTESIAN_POINT('',(-6.678561801727E-17,1.));+#2536 = CARTESIAN_POINT('',(4.475,1.));+#2537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2538 = ORIENTED_EDGE('',*,*,#2423,.T.);+#2539 = ORIENTED_EDGE('',*,*,#2540,.T.);+#2540 = EDGE_CURVE('',#2402,#2541,#2543,.T.);+#2541 = VERTEX_POINT('',#2542);+#2542 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2543 = SURFACE_CURVE('',#2544,(#2548,#2555),.PCURVE_S1.);+#2544 = LINE('',#2545,#2546);+#2545 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2546 = VECTOR('',#2547,1.);+#2547 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2548 = PCURVE('',#2438,#2549);+#2549 = DEFINITIONAL_REPRESENTATION('',(#2550),#2554);+#2550 = LINE('',#2551,#2552);+#2551 = CARTESIAN_POINT('',(5.632428242743,-2.39808173319E-14));+#2552 = VECTOR('',#2553,1.);+#2553 = DIRECTION('',(-0.596575959062,0.802556617983));+#2554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2555 = PCURVE('',#2359,#2556);+#2556 = DEFINITIONAL_REPRESENTATION('',(#2557),#2560);+#2557 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2558,#2559),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2558 = CARTESIAN_POINT('',(1.690560100251E-16,1.));+#2559 = CARTESIAN_POINT('',(3.475,1.));+#2560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2561 = ORIENTED_EDGE('',*,*,#2562,.T.);+#2562 = EDGE_CURVE('',#2541,#2563,#2565,.T.);+#2563 = VERTEX_POINT('',#2564);+#2564 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2565 = SURFACE_CURVE('',#2566,(#2570,#2577),.PCURVE_S1.);+#2566 = LINE('',#2567,#2568);+#2567 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2568 = VECTOR('',#2569,1.);+#2569 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2570 = PCURVE('',#2438,#2571);+#2571 = DEFINITIONAL_REPRESENTATION('',(#2572),#2576);+#2572 = LINE('',#2573,#2574);+#2573 = CARTESIAN_POINT('',(3.627830838308,2.696727698935));+#2574 = VECTOR('',#2575,1.);+#2575 = DIRECTION('',(-0.989336133008,0.145650320716));+#2576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2577 = PCURVE('',#2331,#2578);+#2578 = DEFINITIONAL_REPRESENTATION('',(#2579),#2582);+#2579 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2580,#2581),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2580 = CARTESIAN_POINT('',(4.744280477712E-16,1.));+#2581 = CARTESIAN_POINT('',(0.194454364826,1.));+#2582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2583 = ORIENTED_EDGE('',*,*,#2584,.T.);+#2584 = EDGE_CURVE('',#2563,#2585,#2587,.T.);+#2585 = VERTEX_POINT('',#2586);+#2586 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2587 = SURFACE_CURVE('',#2588,(#2592,#2599),.PCURVE_S1.);+#2588 = LINE('',#2589,#2590);+#2589 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2590 = VECTOR('',#2591,1.);+#2591 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2592 = PCURVE('',#2438,#2593);+#2593 = DEFINITIONAL_REPRESENTATION('',(#2594),#2598);+#2594 = LINE('',#2595,#2596);+#2595 = CARTESIAN_POINT('',(3.515780409894,2.713223791911));+#2596 = VECTOR('',#2597,1.);+#2597 = DIRECTION('',(-0.802556617983,-0.596575959062));+#2598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2599 = PCURVE('',#2303,#2600);+#2600 = DEFINITIONAL_REPRESENTATION('',(#2601),#2604);+#2601 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2602,#2603),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,4.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2602 = CARTESIAN_POINT('',(-6.678561801727E-17,1.));+#2603 = CARTESIAN_POINT('',(4.475,1.));+#2604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2605 = ORIENTED_EDGE('',*,*,#2606,.T.);+#2606 = EDGE_CURVE('',#2585,#2474,#2607,.T.);+#2607 = SURFACE_CURVE('',#2608,(#2612,#2619),.PCURVE_S1.);+#2608 = LINE('',#2609,#2610);+#2609 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2610 = VECTOR('',#2611,1.);+#2611 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2612 = PCURVE('',#2438,#2613);+#2613 = DEFINITIONAL_REPRESENTATION('',(#2614),#2618);+#2614 = LINE('',#2615,#2616);+#2615 = CARTESIAN_POINT('',(1.649609297621E-02,0.112050428413));+#2616 = VECTOR('',#2617,1.);+#2617 = DIRECTION('',(-0.145650320716,-0.989336133008));+#2618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2619 = PCURVE('',#2275,#2620);+#2620 = DEFINITIONAL_REPRESENTATION('',(#2621),#2624);+#2621 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2622,#2623),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2622 = CARTESIAN_POINT('',(-6.960457594574E-17,1.));+#2623 = CARTESIAN_POINT('',(0.194454364826,1.));+#2624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2625 = FACE_BOUND('',#2626,.F.);+#2626 = EDGE_LOOP('',(#2627,#2656,#2683,#2719,#2755,#2791,#2836,#2872,+ #2908,#2944,#2980,#3007,#3043,#3079,#3124,#3169,#3214,#3259,#3295,+ #3331,#3358,#3385));+#2627 = ORIENTED_EDGE('',*,*,#2628,.T.);+#2628 = EDGE_CURVE('',#2629,#2631,#2633,.T.);+#2629 = VERTEX_POINT('',#2630);+#2630 = CARTESIAN_POINT('',(0.886316715473,0.24706570842,1.75));+#2631 = VERTEX_POINT('',#2632);+#2632 = CARTESIAN_POINT('',(0.648074782354,0.24706570842,1.75));+#2633 = SURFACE_CURVE('',#2634,(#2638,#2645),.PCURVE_S1.);+#2634 = LINE('',#2635,#2636);+#2635 = CARTESIAN_POINT('',(-0.516005429014,0.24706570842,1.75));+#2636 = VECTOR('',#2637,1.);+#2637 = DIRECTION('',(-1.,-0.,-0.));+#2638 = PCURVE('',#2438,#2639);+#2639 = DEFINITIONAL_REPRESENTATION('',(#2640),#2644);+#2640 = LINE('',#2641,#2642);+#2641 = CARTESIAN_POINT('',(2.310093468307,0.266730110019));+#2642 = VECTOR('',#2643,1.);+#2643 = DIRECTION('',(-0.596575959062,0.802556617983));+#2644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2645 = PCURVE('',#2646,#2651);+#2646 = PLANE('',#2647);+#2647 = AXIS2_PLACEMENT_3D('',#2648,#2649,#2650);+#2648 = CARTESIAN_POINT('',(0.648074782354,0.24706570842,1.8000001));+#2649 = DIRECTION('',(0.,-1.,0.));+#2650 = DIRECTION('',(1.,0.,0.));+#2651 = DEFINITIONAL_REPRESENTATION('',(#2652),#2655);+#2652 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2653,#2654),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.402322144487,-1.164080211368),.PIECEWISE_BEZIER_KNOTS.);+#2653 = CARTESIAN_POINT('',(0.238241933119,-5.00001E-02));+#2654 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2656 = ORIENTED_EDGE('',*,*,#2657,.T.);+#2657 = EDGE_CURVE('',#2631,#2658,#2660,.T.);+#2658 = VERTEX_POINT('',#2659);+#2659 = CARTESIAN_POINT('',(0.648074782354,1.071458429372E-02,1.75));+#2660 = SURFACE_CURVE('',#2661,(#2665,#2672),.PCURVE_S1.);+#2661 = LINE('',#2662,#2663);+#2662 = CARTESIAN_POINT('',(0.648074782354,1.135442932529,1.75));+#2663 = VECTOR('',#2664,1.);+#2664 = DIRECTION('',(0.,-1.,0.));+#2665 = PCURVE('',#2438,#2666);+#2666 = DEFINITIONAL_REPRESENTATION('',(#2667),#2671);+#2667 = LINE('',#2668,#2669);+#2668 = CARTESIAN_POINT('',(2.291582716355,-1.19749466196));+#2669 = VECTOR('',#2670,1.);+#2670 = DIRECTION('',(0.802556617983,0.596575959062));+#2671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2672 = PCURVE('',#2673,#2678);+#2673 = PLANE('',#2674);+#2674 = AXIS2_PLACEMENT_3D('',#2675,#2676,#2677);+#2675 = CARTESIAN_POINT('',(0.648074782354,1.071458429372E-02,1.8000001)+ );+#2676 = DIRECTION('',(1.,0.,0.));+#2677 = DIRECTION('',(0.,1.,0.));+#2678 = DEFINITIONAL_REPRESENTATION('',(#2679),#2682);+#2679 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2680,#2681),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.888377224109,1.124728348236),.PIECEWISE_BEZIER_KNOTS.);+#2680 = CARTESIAN_POINT('',(0.236351124126,-5.00001E-02));+#2681 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2683 = ORIENTED_EDGE('',*,*,#2684,.T.);+#2684 = EDGE_CURVE('',#2658,#2685,#2687,.T.);+#2685 = VERTEX_POINT('',#2686);+#2686 = CARTESIAN_POINT('',(0.694399602683,2.820456747906E-02,1.75));+#2687 = SURFACE_CURVE('',#2688,(#2694,#2703),.PCURVE_S1.);+#2688 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2689,#2690,#2691,#2692,#2693),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2689 = CARTESIAN_POINT('',(0.648074782354,1.071458429372E-02,1.75));+#2690 = CARTESIAN_POINT('',(0.659104361436,1.654450466588E-02,1.75));+#2691 = CARTESIAN_POINT('',(0.670501871852,2.140293375841E-02,1.75));+#2692 = CARTESIAN_POINT('',(0.682267071101,2.52896085925E-02,1.75));+#2693 = CARTESIAN_POINT('',(0.694399602683,2.820456747905E-02,1.75));+#2694 = PCURVE('',#2438,#2695);+#2695 = DEFINITIONAL_REPRESENTATION('',(#2696),#2702);+#2696 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2697,#2698,#2699,#2700,#2701),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2697 = CARTESIAN_POINT('',(3.194240895665,-0.526508768927));+#2698 = CARTESIAN_POINT('',(3.196142036207,-0.538838620951));+#2699 = CARTESIAN_POINT('',(3.199042352493,-0.550884190359));+#2700 = CARTESIAN_POINT('',(3.202941910908,-0.562645125644));+#2701 = CARTESIAN_POINT('',(3.207840468027,-0.574121163552));+#2702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2703 = PCURVE('',#2704,#2711);+#2704 = SURFACE_OF_LINEAR_EXTRUSION('',#2705,#2709);+#2705 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2706,#2707,#2708),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2706 = CARTESIAN_POINT('',(0.694399602683,2.820456747906E-02,1.8000001)+ );+#2707 = CARTESIAN_POINT('',(0.670134220606,2.237457308394E-02,1.8000001)+ );+#2708 = CARTESIAN_POINT('',(0.648074782354,1.071458429372E-02,1.8000001)+ );+#2709 = VECTOR('',#2710,1.);+#2710 = DIRECTION('',(0.,0.,1.));+#2711 = DEFINITIONAL_REPRESENTATION('',(#2712),#2718);+#2712 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2713,#2714,#2715,#2716,#2717),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2713 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2714 = CARTESIAN_POINT('',(0.750003174229,-5.00001E-02));+#2715 = CARTESIAN_POINT('',(0.4999999257,-5.00001E-02));+#2716 = CARTESIAN_POINT('',(0.24999671432,-5.00001E-02));+#2717 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2719 = ORIENTED_EDGE('',*,*,#2720,.T.);+#2720 = EDGE_CURVE('',#2685,#2721,#2723,.T.);+#2721 = VERTEX_POINT('',#2722);+#2722 = CARTESIAN_POINT('',(0.744190906165,3.403456187417E-02,1.75));+#2723 = SURFACE_CURVE('',#2724,(#2730,#2739),.PCURVE_S1.);+#2724 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2725,#2726,#2727,#2728,#2729),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2725 = CARTESIAN_POINT('',(0.694399602683,2.820456747905E-02,1.75));+#2726 = CARTESIAN_POINT('',(0.70653249844,3.111961386221E-02,1.75));+#2727 = CARTESIAN_POINT('',(0.718875546077,3.306297490806E-02,1.75));+#2728 = CARTESIAN_POINT('',(0.731428462744,3.403456187417E-02,1.75));+#2729 = CARTESIAN_POINT('',(0.744190906165,3.403456187417E-02,1.75));+#2730 = PCURVE('',#2438,#2731);+#2731 = DEFINITIONAL_REPRESENTATION('',(#2732),#2738);+#2732 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2733,#2734,#2735,#2736,#2737),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2733 = CARTESIAN_POINT('',(3.207840468027,-0.574121163552));+#2734 = CARTESIAN_POINT('',(3.212739172183,-0.585597545929));+#2735 = CARTESIAN_POINT('',(3.218543080396,-0.596662902976));+#2736 = CARTESIAN_POINT('',(3.225252095146,-0.607316954748));+#2737 = CARTESIAN_POINT('',(3.23286586207,-0.617559538177));+#2738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2739 = PCURVE('',#2740,#2747);+#2740 = SURFACE_OF_LINEAR_EXTRUSION('',#2741,#2745);+#2741 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2742,#2743,#2744),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2742 = CARTESIAN_POINT('',(0.744190906165,3.403456187417E-02,1.8000001)+ );+#2743 = CARTESIAN_POINT('',(0.71866498476,3.403456187417E-02,1.8000001)+ );+#2744 = CARTESIAN_POINT('',(0.694399602683,2.820456747906E-02,1.8000001)+ );+#2745 = VECTOR('',#2746,1.);+#2746 = DIRECTION('',(0.,0.,1.));+#2747 = DEFINITIONAL_REPRESENTATION('',(#2748),#2754);+#2748 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2749,#2750,#2751,#2752,#2753),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2749 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2750 = CARTESIAN_POINT('',(0.749995781677,-5.00001E-02));+#2751 = CARTESIAN_POINT('',(0.499990432077,-5.00001E-02));+#2752 = CARTESIAN_POINT('',(0.249989867532,-5.00001E-02));+#2753 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2755 = ORIENTED_EDGE('',*,*,#2756,.T.);+#2756 = EDGE_CURVE('',#2721,#2757,#2759,.T.);+#2757 = VERTEX_POINT('',#2758);+#2758 = CARTESIAN_POINT('',(0.826283529945,5.987561811196E-03,1.75));+#2759 = SURFACE_CURVE('',#2760,(#2766,#2775),.PCURVE_S1.);+#2760 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2761,#2762,#2763,#2764,#2765),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2761 = CARTESIAN_POINT('',(0.744190906165,3.403456187417E-02,1.75));+#2762 = CARTESIAN_POINT('',(0.770464128385,3.403456187417E-02,1.75));+#2763 = CARTESIAN_POINT('',(0.792931072062,2.937448774631E-02,1.75));+#2764 = CARTESIAN_POINT('',(0.811541125208,2.002043904742E-02,1.75));+#2765 = CARTESIAN_POINT('',(0.826283529945,5.987561811196E-03,1.75));+#2766 = PCURVE('',#2438,#2767);+#2767 = DEFINITIONAL_REPRESENTATION('',(#2768),#2774);+#2768 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2769,#2770,#2771,#2772,#2773),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2769 = CARTESIAN_POINT('',(3.23286586207,-0.617559538177));+#2770 = CARTESIAN_POINT('',(3.248539834814,-0.638645286545));+#2771 = CARTESIAN_POINT('',(3.265683046616,-0.653896192687));+#2772 = CARTESIAN_POINT('',(3.284292510609,-0.663251413427));+#2773 = CARTESIAN_POINT('',(3.304349653349,-0.666711350718));+#2774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2775 = PCURVE('',#2776,#2783);+#2776 = SURFACE_OF_LINEAR_EXTRUSION('',#2777,#2781);+#2777 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2778,#2779,#2780),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2778 = CARTESIAN_POINT('',(0.826283529945,5.987561811196E-03,1.8000001)+ );+#2779 = CARTESIAN_POINT('',(0.796818423137,3.403456187417E-02,1.8000001)+ );+#2780 = CARTESIAN_POINT('',(0.744190906165,3.403456187417E-02,1.8000001)+ );+#2781 = VECTOR('',#2782,1.);+#2782 = DIRECTION('',(0.,0.,1.));+#2783 = DEFINITIONAL_REPRESENTATION('',(#2784),#2790);+#2784 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2785,#2786,#2787,#2788,#2789),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2785 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2786 = CARTESIAN_POINT('',(0.750385124254,-5.00001E-02));+#2787 = CARTESIAN_POINT('',(0.500369225963,-5.00001E-02));+#2788 = CARTESIAN_POINT('',(0.250167169478,-5.00001E-02));+#2789 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2791 = ORIENTED_EDGE('',*,*,#2792,.T.);+#2792 = EDGE_CURVE('',#2757,#2793,#2795,.T.);+#2793 = VERTEX_POINT('',#2794);+#2794 = CARTESIAN_POINT('',(0.855748636753,-7.248101139869E-02,1.75));+#2795 = SURFACE_CURVE('',#2796,(#2805,#2817),.PCURVE_S1.);+#2796 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2797,#2798,#2799,#2800,#2801,+ #2802,#2803,#2804),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174915340045,+ 1.),.UNSPECIFIED.);+#2797 = CARTESIAN_POINT('',(0.826283529945,5.987561811196E-03,1.75));+#2798 = CARTESIAN_POINT('',(0.828861582634,3.533586524724E-03,1.75));+#2799 = CARTESIAN_POINT('',(0.831289401133,9.652835735698E-04,1.75));+#2800 = CARTESIAN_POINT('',(0.833566876153,-1.717307620344E-03,1.75));+#2801 = CARTESIAN_POINT('',(0.845727457828,-1.770676795288E-02,1.75));+#2802 = CARTESIAN_POINT('',(0.85241441339,-3.344069968899E-02,1.75));+#2803 = CARTESIAN_POINT('',(0.855748636753,-5.170767254346E-02,1.75));+#2804 = CARTESIAN_POINT('',(0.855748636753,-7.248101139869E-02,1.75));+#2805 = PCURVE('',#2438,#2806);+#2806 = DEFINITIONAL_REPRESENTATION('',(#2807),#2816);+#2807 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2808,#2809,#2810,#2811,#2812,+ #2813,#2814,#2815),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174915340045,+ 1.),.UNSPECIFIED.);+#2808 = CARTESIAN_POINT('',(3.304349653349,-0.666711350718));+#2809 = CARTESIAN_POINT('',(3.30785711171,-0.667316401305));+#2810 = CARTESIAN_POINT('',(3.311366698391,-0.667732675312));+#2811 = CARTESIAN_POINT('',(3.314878316551,-0.667960108548));+#2812 = CARTESIAN_POINT('',(3.334965474434,-0.668180736217));+#2813 = CARTESIAN_POINT('',(3.351582122404,-0.664160911242));+#2814 = CARTESIAN_POINT('',(3.368231519859,-0.655939177418));+#2815 = CARTESIAN_POINT('',(3.384903300435,-0.643546302867));+#2816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2817 = PCURVE('',#2818,#2825);+#2818 = SURFACE_OF_LINEAR_EXTRUSION('',#2819,#2823);+#2819 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2820,#2821,#2822),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2820 = CARTESIAN_POINT('',(0.855748636753,-7.248101139869E-02,1.8000001+ ));+#2821 = CARTESIAN_POINT('',(0.855748636753,-2.205943825177E-02,1.8000001+ ));+#2822 = CARTESIAN_POINT('',(0.826283529945,5.987561811196E-03,1.8000001)+ );+#2823 = VECTOR('',#2824,1.);+#2824 = DIRECTION('',(0.,0.,1.));+#2825 = DEFINITIONAL_REPRESENTATION('',(#2826),#2835);+#2826 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2827,#2828,#2829,#2830,#2831,+ #2832,#2833,#2834),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174915340045,+ 1.),.UNSPECIFIED.);+#2827 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2828 = CARTESIAN_POINT('',(0.956252446234,-5.00001E-02));+#2829 = CARTESIAN_POINT('',(0.912502452164,-5.00001E-02));+#2830 = CARTESIAN_POINT('',(0.868751231681,-5.00001E-02));+#2831 = CARTESIAN_POINT('',(0.618623188767,-5.00001E-02));+#2832 = CARTESIAN_POINT('',(0.412245981851,-5.00001E-02));+#2833 = CARTESIAN_POINT('',(0.20599653639,-5.00001E-02));+#2834 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2836 = ORIENTED_EDGE('',*,*,#2837,.T.);+#2837 = EDGE_CURVE('',#2793,#2838,#2840,.T.);+#2838 = VERTEX_POINT('',#2839);+#2839 = CARTESIAN_POINT('',(0.827228934442,-0.151264719441,1.75));+#2840 = SURFACE_CURVE('',#2841,(#2847,#2856),.PCURVE_S1.);+#2841 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2842,#2843,#2844,#2845,#2846),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2842 = CARTESIAN_POINT('',(0.855748636753,-7.248101139869E-02,1.75));+#2843 = CARTESIAN_POINT('',(0.855748636753,-9.796959948065E-02,1.75));+#2844 = CARTESIAN_POINT('',(0.851009280233,-0.119622937727,1.75));+#2845 = CARTESIAN_POINT('',(0.841496874787,-0.137390921093,1.75));+#2846 = CARTESIAN_POINT('',(0.827228934442,-0.151264719441,1.75));+#2847 = PCURVE('',#2438,#2848);+#2848 = DEFINITIONAL_REPRESENTATION('',(#2849),#2855);+#2849 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2850,#2851,#2852,#2853,#2854),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2850 = CARTESIAN_POINT('',(3.384903300435,-0.643546302867));+#2851 = CARTESIAN_POINT('',(3.405359335483,-0.628340423987));+#2852 = CARTESIAN_POINT('',(3.419909979233,-0.611618961016));+#2853 = CARTESIAN_POINT('',(3.42849491947,-0.593384765355));+#2854 = CARTESIAN_POINT('',(3.431117517955,-0.573657160851));+#2855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2856 = PCURVE('',#2857,#2864);+#2857 = SURFACE_OF_LINEAR_EXTRUSION('',#2858,#2862);+#2858 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2859,#2860,#2861),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2859 = CARTESIAN_POINT('',(0.827228934442,-0.151264719441,1.8000001));+#2860 = CARTESIAN_POINT('',(0.855748636753,-0.12353285421,1.8000001));+#2861 = CARTESIAN_POINT('',(0.855748636753,-7.248101139869E-02,1.8000001+ ));+#2862 = VECTOR('',#2863,1.);+#2863 = DIRECTION('',(0.,0.,1.));+#2864 = DEFINITIONAL_REPRESENTATION('',(#2865),#2871);+#2865 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2866,#2867,#2868,#2869,#2870),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2866 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2867 = CARTESIAN_POINT('',(0.750365641293,-5.00001E-02));+#2868 = CARTESIAN_POINT('',(0.500339278044,-5.00001E-02));+#2869 = CARTESIAN_POINT('',(0.250141817578,-5.00001E-02));+#2870 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2872 = ORIENTED_EDGE('',*,*,#2873,.T.);+#2873 = EDGE_CURVE('',#2838,#2874,#2876,.T.);+#2874 = VERTEX_POINT('',#2875);+#2875 = CARTESIAN_POINT('',(0.746081715158,-0.178996584672,1.75));+#2876 = SURFACE_CURVE('',#2877,(#2883,#2892),.PCURVE_S1.);+#2877 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2878,#2879,#2880,#2881,#2882),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2878 = CARTESIAN_POINT('',(0.827228934442,-0.151264719441,1.75));+#2879 = CARTESIAN_POINT('',(0.812958648629,-0.165140798462,1.75));+#2880 = CARTESIAN_POINT('',(0.794662918291,-0.174389618774,1.75));+#2881 = CARTESIAN_POINT('',(0.772352813617,-0.178996584672,1.75));+#2882 = CARTESIAN_POINT('',(0.746081715158,-0.178996584672,1.75));+#2883 = PCURVE('',#2438,#2884);+#2884 = DEFINITIONAL_REPRESENTATION('',(#2885),#2891);+#2885 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2886,#2887,#2888,#2889,#2890),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2886 = CARTESIAN_POINT('',(3.431117517955,-0.573657160851));+#2887 = CARTESIAN_POINT('',(3.433740547561,-0.553926313381));+#2888 = CARTESIAN_POINT('',(3.430248456637,-0.53372533007));+#2889 = CARTESIAN_POINT('',(3.420636135514,-0.513071802817));+#2890 = CARTESIAN_POINT('',(3.404963429756,-0.491987758887));+#2891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2892 = PCURVE('',#2893,#2900);+#2893 = SURFACE_OF_LINEAR_EXTRUSION('',#2894,#2898);+#2894 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2895,#2896,#2897),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2895 = CARTESIAN_POINT('',(0.746081715158,-0.178996584672,1.8000001));+#2896 = CARTESIAN_POINT('',(0.79870923213,-0.178996584672,1.8000001));+#2897 = CARTESIAN_POINT('',(0.827228934442,-0.151264719441,1.8000001));+#2898 = VECTOR('',#2899,1.);+#2899 = DIRECTION('',(0.,0.,1.));+#2900 = DEFINITIONAL_REPRESENTATION('',(#2901),#2907);+#2901 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2902,#2903,#2904,#2905,#2906),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2902 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2903 = CARTESIAN_POINT('',(0.749817062318,-5.00001E-02));+#2904 = CARTESIAN_POINT('',(0.499606720745,-5.00001E-02));+#2905 = CARTESIAN_POINT('',(0.249594698458,-5.00001E-02));+#2906 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2908 = ORIENTED_EDGE('',*,*,#2909,.T.);+#2909 = EDGE_CURVE('',#2874,#2910,#2912,.T.);+#2910 = VERTEX_POINT('',#2911);+#2911 = CARTESIAN_POINT('',(0.686206097046,-0.171275781283,1.75));+#2912 = SURFACE_CURVE('',#2913,(#2919,#2928),.PCURVE_S1.);+#2913 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2914,#2915,#2916,#2917,#2918),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2914 = CARTESIAN_POINT('',(0.746081715158,-0.178996584672,1.75));+#2915 = CARTESIAN_POINT('',(0.730798228024,-0.178996584672,1.75));+#2916 = CARTESIAN_POINT('',(0.71572403329,-0.177709877098,1.75));+#2917 = CARTESIAN_POINT('',(0.700859800519,-0.175136165532,1.75));+#2918 = CARTESIAN_POINT('',(0.686206097046,-0.171275781283,1.75));+#2919 = PCURVE('',#2438,#2920);+#2920 = DEFINITIONAL_REPRESENTATION('',(#2921),#2927);+#2921 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2922,#2923,#2924,#2925,#2926),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2922 = CARTESIAN_POINT('',(3.404963429756,-0.491987758887));+#2923 = CARTESIAN_POINT('',(3.395845668761,-0.479721895142));+#2924 = CARTESIAN_POINT('',(3.385820110902,-0.468391619202));+#2925 = CARTESIAN_POINT('',(3.37488691773,-0.457997645266));+#2926 = CARTESIAN_POINT('',(3.363046693601,-0.448540231002));+#2927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2928 = PCURVE('',#2929,#2936);+#2929 = SURFACE_OF_LINEAR_EXTRUSION('',#2930,#2934);+#2930 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2931,#2932,#2933),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2931 = CARTESIAN_POINT('',(0.686206097046,-0.171275781283,1.8000001));+#2932 = CARTESIAN_POINT('',(0.715513636438,-0.178996584672,1.8000001));+#2933 = CARTESIAN_POINT('',(0.746081715158,-0.178996584672,1.8000001));+#2934 = VECTOR('',#2935,1.);+#2935 = DIRECTION('',(0.,0.,1.));+#2936 = DEFINITIONAL_REPRESENTATION('',(#2937),#2943);+#2937 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2938,#2939,#2940,#2941,#2942),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2938 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2939 = CARTESIAN_POINT('',(0.750009032729,-5.00001E-02));+#2940 = CARTESIAN_POINT('',(0.500005269321,-5.00001E-02));+#2941 = CARTESIAN_POINT('',(0.249998870199,-5.00001E-02));+#2942 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2944 = ORIENTED_EDGE('',*,*,#2945,.T.);+#2945 = EDGE_CURVE('',#2910,#2946,#2948,.T.);+#2946 = VERTEX_POINT('',#2947);+#2947 = CARTESIAN_POINT('',(0.627906153095,-0.147798236287,1.75));+#2948 = SURFACE_CURVE('',#2949,(#2955,#2964),.PCURVE_S1.);+#2949 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2950,#2951,#2952,#2953,#2954),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2950 = CARTESIAN_POINT('',(0.686206097046,-0.171275781283,1.75));+#2951 = CARTESIAN_POINT('',(0.671550156068,-0.167414807585,1.75));+#2952 = CARTESIAN_POINT('',(0.656947781395,-0.162214384735,1.75));+#2953 = CARTESIAN_POINT('',(0.642399585991,-0.155675101991,1.75));+#2954 = CARTESIAN_POINT('',(0.627906153095,-0.147798236287,1.75));+#2955 = PCURVE('',#2438,#2956);+#2956 = DEFINITIONAL_REPRESENTATION('',(#2957),#2963);+#2957 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2958,#2959,#2960,#2961,#2962),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2958 = CARTESIAN_POINT('',(3.363046693601,-0.448540231002));+#2959 = CARTESIAN_POINT('',(3.351204661562,-0.439081372664));+#2960 = CARTESIAN_POINT('',(3.338319602112,-0.430464587481));+#2961 = CARTESIAN_POINT('',(3.324392353844,-0.422690015855));+#2962 = CARTESIAN_POINT('',(3.309424289514,-0.415757364078));+#2963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2964 = PCURVE('',#2965,#2972);+#2965 = SURFACE_OF_LINEAR_EXTRUSION('',#2966,#2970);+#2966 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2967,#2968,#2969),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2967 = CARTESIAN_POINT('',(0.627906153095,-0.147798236287,1.8000001));+#2968 = CARTESIAN_POINT('',(0.656898557655,-0.163554977895,1.8000001));+#2969 = CARTESIAN_POINT('',(0.686206097046,-0.171275781283,1.8000001));+#2970 = VECTOR('',#2971,1.);+#2971 = DIRECTION('',(0.,0.,1.));+#2972 = DEFINITIONAL_REPRESENTATION('',(#2973),#2979);+#2973 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2974,#2975,#2976,#2977,#2978),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2974 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2975 = CARTESIAN_POINT('',(0.749962956926,-5.00001E-02));+#2976 = CARTESIAN_POINT('',(0.499943456523,-5.00001E-02));+#2977 = CARTESIAN_POINT('',(0.249952239497,-5.00001E-02));+#2978 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2980 = ORIENTED_EDGE('',*,*,#2981,.T.);+#2981 = EDGE_CURVE('',#2946,#2982,#2984,.T.);+#2982 = VERTEX_POINT('',#2983);+#2983 = CARTESIAN_POINT('',(0.627906153095,-0.212400876881,1.75));+#2984 = SURFACE_CURVE('',#2985,(#2989,#2996),.PCURVE_S1.);+#2985 = LINE('',#2986,#2987);+#2986 = CARTESIAN_POINT('',(0.627906153095,1.023885201942,1.75));+#2987 = VECTOR('',#2988,1.);+#2988 = DIRECTION('',(0.,-1.,0.));+#2989 = PCURVE('',#2438,#2990);+#2990 = DEFINITIONAL_REPRESENTATION('',(#2991),#2995);+#2991 = LINE('',#2992,#2993);+#2992 = CARTESIAN_POINT('',(2.369081991982,-1.114755534957));+#2993 = VECTOR('',#2994,1.);+#2994 = DIRECTION('',(0.802556617983,0.596575959062));+#2995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2996 = PCURVE('',#2997,#3002);+#2997 = PLANE('',#2998);+#2998 = AXIS2_PLACEMENT_3D('',#2999,#3000,#3001);+#2999 = CARTESIAN_POINT('',(0.627906153095,-0.212400876881,1.8000001));+#3000 = DIRECTION('',(1.,0.,0.));+#3001 = DIRECTION('',(0.,1.,0.));+#3002 = DEFINITIONAL_REPRESENTATION('',(#3003),#3006);+#3003 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3004,#3005),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.171683438229,1.236286078823),.PIECEWISE_BEZIER_KNOTS.);+#3004 = CARTESIAN_POINT('',(6.460264059448E-02,-5.00001E-02));+#3005 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3007 = ORIENTED_EDGE('',*,*,#3008,.T.);+#3008 = EDGE_CURVE('',#2982,#3009,#3011,.T.);+#3009 = VERTEX_POINT('',#3010);+#3010 = CARTESIAN_POINT('',(0.683527450973,-0.227527348825,1.75));+#3011 = SURFACE_CURVE('',#3012,(#3018,#3027),.PCURVE_S1.);+#3012 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3013,#3014,#3015,#3016,#3017),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3013 = CARTESIAN_POINT('',(0.627906153095,-0.212400876881,1.75));+#3014 = CARTESIAN_POINT('',(0.64019960567,-0.217444344604,1.75));+#3015 = CARTESIAN_POINT('',(0.653568563876,-0.221646291788,1.75));+#3016 = CARTESIAN_POINT('',(0.668011783357,-0.225007037335,1.75));+#3017 = CARTESIAN_POINT('',(0.683527450973,-0.227527348825,1.75));+#3018 = PCURVE('',#2438,#3019);+#3019 = DEFINITIONAL_REPRESENTATION('',(#3020),#3026);+#3020 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3021,#3022,#3023,#3024,#3025),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3021 = CARTESIAN_POINT('',(3.361271566262,-0.377216981808));+#3022 = CARTESIAN_POINT('',(3.372653212921,-0.384074361936));+#3023 = CARTESIAN_POINT('',(3.384001112505,-0.392296927149));+#3024 = CARTESIAN_POINT('',(3.395314778598,-0.40188348853));+#3025 = CARTESIAN_POINT('',(3.406593745553,-0.412832133013));+#3026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3027 = PCURVE('',#3028,#3035);+#3028 = SURFACE_OF_LINEAR_EXTRUSION('',#3029,#3033);+#3029 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3030,#3031,#3032),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3030 = CARTESIAN_POINT('',(0.683527450973,-0.227527348825,1.8000001));+#3031 = CARTESIAN_POINT('',(0.652486670004,-0.222485191511,1.8000001));+#3032 = CARTESIAN_POINT('',(0.627906153095,-0.212400876881,1.8000001));+#3033 = VECTOR('',#3034,1.);+#3034 = DIRECTION('',(0.,0.,1.));+#3035 = DEFINITIONAL_REPRESENTATION('',(#3036),#3042);+#3036 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3037,#3038,#3039,#3040,#3041),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3037 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3038 = CARTESIAN_POINT('',(0.749935027398,-5.00001E-02));+#3039 = CARTESIAN_POINT('',(0.499905954591,-5.00001E-02));+#3040 = CARTESIAN_POINT('',(0.249923924785,-5.00001E-02));+#3041 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3043 = ORIENTED_EDGE('',*,*,#3044,.T.);+#3044 = EDGE_CURVE('',#3009,#3045,#3047,.T.);+#3045 = VERTEX_POINT('',#3046);+#3046 = CARTESIAN_POINT('',(0.752069276969,-0.23256950614,1.75));+#3047 = SURFACE_CURVE('',#3048,(#3054,#3063),.PCURVE_S1.);+#3048 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3049,#3050,#3051,#3052,#3053),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3049 = CARTESIAN_POINT('',(0.683527450973,-0.227527348825,1.75));+#3050 = CARTESIAN_POINT('',(0.699053946025,-0.230049419088,1.75));+#3051 = CARTESIAN_POINT('',(0.715654386882,-0.231729881734,1.75));+#3052 = CARTESIAN_POINT('',(0.733326956426,-0.23256950614,1.75));+#3053 = CARTESIAN_POINT('',(0.752069276969,-0.23256950614,1.75));+#3054 = PCURVE('',#2438,#3055);+#3055 = DEFINITIONAL_REPRESENTATION('',(#3056),#3062);+#3056 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3057,#3058,#3059,#3060,#3061),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3057 = CARTESIAN_POINT('',(3.406593745553,-0.412832133013));+#3058 = CARTESIAN_POINT('',(3.41788058341,-0.423788417886));+#3059 = CARTESIAN_POINT('',(3.429132673753,-0.436108687942));+#3060 = CARTESIAN_POINT('',(3.440349550001,-0.449791025851));+#3061 = CARTESIAN_POINT('',(3.451530767855,-0.46483279924));+#3062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3063 = PCURVE('',#3064,#3071);+#3064 = SURFACE_OF_LINEAR_EXTRUSION('',#3065,#3069);+#3065 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3066,#3067,#3068),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3066 = CARTESIAN_POINT('',(0.752069276969,-0.23256950614,1.8000001));+#3067 = CARTESIAN_POINT('',(0.714568231941,-0.23256950614,1.8000001));+#3068 = CARTESIAN_POINT('',(0.683527450973,-0.227527348825,1.8000001));+#3069 = VECTOR('',#3070,1.);+#3070 = DIRECTION('',(0.,0.,1.));+#3071 = DEFINITIONAL_REPRESENTATION('',(#3072),#3078);+#3072 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3073,#3074,#3075,#3076,#3077),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3073 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3074 = CARTESIAN_POINT('',(0.749901668584,-5.00001E-02));+#3075 = CARTESIAN_POINT('',(0.499861521585,-5.00001E-02));+#3076 = CARTESIAN_POINT('',(0.249890643446,-5.00001E-02));+#3077 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3079 = ORIENTED_EDGE('',*,*,#3080,.T.);+#3080 = EDGE_CURVE('',#3045,#3081,#3083,.T.);+#3081 = VERTEX_POINT('',#3082);+#3082 = CARTESIAN_POINT('',(0.874814294099,-0.189711168965,1.75));+#3083 = SURFACE_CURVE('',#3084,(#3093,#3105),.PCURVE_S1.);+#3084 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3085,#3086,#3087,#3088,#3089,+ #3090,#3091,#3092),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.878154535039,+ 1.),.UNSPECIFIED.);+#3085 = CARTESIAN_POINT('',(0.752069276969,-0.23256950614,1.75));+#3086 = CARTESIAN_POINT('',(0.786140005455,-0.23256950614,1.75));+#3087 = CARTESIAN_POINT('',(0.816104244324,-0.227095449627,1.75));+#3088 = CARTESIAN_POINT('',(0.841857457459,-0.216074444166,1.75));+#3089 = CARTESIAN_POINT('',(0.866351374967,-0.197235226511,1.75));+#3090 = CARTESIAN_POINT('',(0.869254149952,-0.194833430457,1.75));+#3091 = CARTESIAN_POINT('',(0.872075142023,-0.192325377262,1.75));+#3092 = CARTESIAN_POINT('',(0.874814294099,-0.189711168965,1.75));+#3093 = PCURVE('',#2438,#3094);+#3094 = DEFINITIONAL_REPRESENTATION('',(#3095),#3104);+#3095 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3096,#3097,#3098,#3099,#3100,+ #3101,#3102,#3103),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.878154535039,+ 1.),.UNSPECIFIED.);+#3096 = CARTESIAN_POINT('',(3.451530767855,-0.46483279924));+#3097 = CARTESIAN_POINT('',(3.471856545377,-0.492176487865));+#3098 = CARTESIAN_POINT('',(3.485339249636,-0.519490176586));+#3099 = CARTESIAN_POINT('',(3.491858016592,-0.546733455125));+#3100 = CARTESIAN_POINT('',(3.491350960113,-0.577630235062));+#3101 = CARTESIAN_POINT('',(3.491155108566,-0.581392730122));+#3102 = CARTESIAN_POINT('',(3.490825189926,-0.585152980217));+#3103 = CARTESIAN_POINT('',(3.490361252033,-0.588910878665));+#3104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3105 = PCURVE('',#3106,#3113);+#3106 = SURFACE_OF_LINEAR_EXTRUSION('',#3107,#3111);+#3107 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3108,#3109,#3110),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3108 = CARTESIAN_POINT('',(0.874814294099,-0.189711168965,1.8000001));+#3109 = CARTESIAN_POINT('',(0.829907580515,-0.23256950614,1.8000001));+#3110 = CARTESIAN_POINT('',(0.752069276969,-0.23256950614,1.8000001));+#3111 = VECTOR('',#3112,1.);+#3112 = DIRECTION('',(0.,0.,1.));+#3113 = DEFINITIONAL_REPRESENTATION('',(#3114),#3123);+#3114 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3115,#3116,#3117,#3118,#3119,+ #3120,#3121,#3122),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.878154535039,+ 1.),.UNSPECIFIED.);+#3115 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3116 = CARTESIAN_POINT('',(0.78114419936,-5.00001E-02));+#3117 = CARTESIAN_POINT('',(0.561648104665,-5.00001E-02));+#3118 = CARTESIAN_POINT('',(0.34182343169,-5.00001E-02));+#3119 = CARTESIAN_POINT('',(9.149911755289E-02,-5.00001E-02));+#3120 = CARTESIAN_POINT('',(6.099824284095E-02,-5.00001E-02));+#3121 = CARTESIAN_POINT('',(3.049824689214E-02,-5.00001E-02));+#3122 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3124 = ORIENTED_EDGE('',*,*,#3125,.T.);+#3125 = EDGE_CURVE('',#3081,#3126,#3128,.T.);+#3126 = VERTEX_POINT('',#3127);+#3127 = CARTESIAN_POINT('',(0.919721007683,-7.248101139869E-02,1.75));+#3128 = SURFACE_CURVE('',#3129,(#3138,#3150),.PCURVE_S1.);+#3129 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3130,#3131,#3132,#3133,#3134,+ #3135,#3136,#3137),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219811778276,+ 1.),.UNSPECIFIED.);+#3130 = CARTESIAN_POINT('',(0.874814294099,-0.189711168965,1.75));+#3131 = CARTESIAN_POINT('',(0.879753079339,-0.184997661649,1.75));+#3132 = CARTESIAN_POINT('',(0.884330707021,-0.180029136939,1.75));+#3133 = CARTESIAN_POINT('',(0.888546391996,-0.174805824633,1.75));+#3134 = CARTESIAN_POINT('',(0.906076713495,-0.14988642925,1.75));+#3135 = CARTESIAN_POINT('',(0.915189251248,-0.127241323834,1.75));+#3136 = CARTESIAN_POINT('',(0.919721007683,-0.101416796184,1.75));+#3137 = CARTESIAN_POINT('',(0.919721007683,-7.248101139869E-02,1.75));+#3138 = PCURVE('',#2438,#3139);+#3139 = DEFINITIONAL_REPRESENTATION('',(#3140),#3149);+#3140 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3141,#3142,#3143,#3144,#3145,+ #3146,#3147,#3148),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219811778276,+ 1.),.UNSPECIFIED.);+#3141 = CARTESIAN_POINT('',(3.490361252033,-0.588910878665));+#3142 = CARTESIAN_POINT('',(3.489524756084,-0.595686498592));+#3143 = CARTESIAN_POINT('',(3.488268136321,-0.602324406377));+#3144 = CARTESIAN_POINT('',(3.48659110877,-0.608823834801));+#3145 = CARTESIAN_POINT('',(3.477050051449,-0.637759222536));+#3146 = CARTESIAN_POINT('',(3.464312393182,-0.658582075498));+#3147 = CARTESIAN_POINT('',(3.446290284552,-0.677625358966));+#3148 = CARTESIAN_POINT('',(3.423067678976,-0.694887752525));+#3149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3150 = PCURVE('',#3151,#3158);+#3151 = SURFACE_OF_LINEAR_EXTRUSION('',#3152,#3156);+#3152 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3153,#3154,#3155),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3153 = CARTESIAN_POINT('',(0.919721007683,-7.248101139869E-02,1.8000001+ ));+#3154 = CARTESIAN_POINT('',(0.919721007683,-0.14685283179,1.8000001));+#3155 = CARTESIAN_POINT('',(0.874814294099,-0.189711168965,1.8000001));+#3156 = VECTOR('',#3157,1.);+#3157 = DIRECTION('',(0.,0.,1.));+#3158 = DEFINITIONAL_REPRESENTATION('',(#3159),#3168);+#3159 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3160,#3161,#3162,#3163,#3164,+ #3165,#3166,#3167),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219811778276,+ 1.),.UNSPECIFIED.);+#3160 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3161 = CARTESIAN_POINT('',(0.94501061372,-5.00001E-02));+#3162 = CARTESIAN_POINT('',(0.890010648885,-5.00001E-02));+#3163 = CARTESIAN_POINT('',(0.835005354648,-5.00001E-02));+#3164 = CARTESIAN_POINT('',(0.584766923026,-5.00001E-02));+#3165 = CARTESIAN_POINT('',(0.389532568141,-5.00001E-02));+#3166 = CARTESIAN_POINT('',(0.194534600824,-5.00001E-02));+#3167 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3169 = ORIENTED_EDGE('',*,*,#3170,.T.);+#3170 = EDGE_CURVE('',#3126,#3171,#3173,.T.);+#3171 = VERTEX_POINT('',#3172);+#3172 = CARTESIAN_POINT('',(0.876862670508,4.443401133572E-02,1.75));+#3173 = SURFACE_CURVE('',#3174,(#3183,#3195),.PCURVE_S1.);+#3174 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3175,#3176,#3177,#3178,#3179,+ #3180,#3181,#3182),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.812174222414,+ 1.),.UNSPECIFIED.);+#3175 = CARTESIAN_POINT('',(0.919721007683,-7.248101139869E-02,1.75));+#3176 = CARTESIAN_POINT('',(0.919721007683,-4.261363196567E-02,1.75));+#3177 = CARTESIAN_POINT('',(0.915033882841,-1.601801986954E-02,1.75));+#3178 = CARTESIAN_POINT('',(0.905608844281,7.234817934892E-03,1.75));+#3179 = CARTESIAN_POINT('',(0.888191123213,3.171918249991E-02,1.75));+#3180 = CARTESIAN_POINT('',(0.884667127079,3.61378927352E-02,1.75));+#3181 = CARTESIAN_POINT('',(0.880890841505,4.037622143388E-02,1.75));+#3182 = CARTESIAN_POINT('',(0.876862670508,4.443401133572E-02,1.75));+#3183 = PCURVE('',#2438,#3184);+#3184 = DEFINITIONAL_REPRESENTATION('',(#3185),#3194);+#3185 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3186,#3187,#3188,#3189,#3190,+ #3191,#3192,#3193),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.812174222414,+ 1.),.UNSPECIFIED.);+#3186 = CARTESIAN_POINT('',(3.423067678976,-0.694887752525));+#3187 = CARTESIAN_POINT('',(3.39909741595,-0.712705913055));+#3188 = CARTESIAN_POINT('',(3.374956705455,-0.724810532787));+#3189 = CARTESIAN_POINT('',(3.35067223517,-0.73111848973));+#3190 = CARTESIAN_POINT('',(3.320631152701,-0.73174656569));+#3191 = CARTESIAN_POINT('',(3.314982556185,-0.731554455566));+#3192 = CARTESIAN_POINT('',(3.309328216251,-0.731052257596));+#3193 = CARTESIAN_POINT('',(3.303668500135,-0.730240202206));+#3194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3195 = PCURVE('',#3196,#3203);+#3196 = SURFACE_OF_LINEAR_EXTRUSION('',#3197,#3201);+#3197 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3198,#3199,#3200),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3198 = CARTESIAN_POINT('',(0.876862670508,4.443401133572E-02,1.8000001)+ );+#3199 = CARTESIAN_POINT('',(0.919721007683,1.260539328673E-03,1.8000001)+ );+#3200 = CARTESIAN_POINT('',(0.919721007683,-7.248101139869E-02,1.8000001+ ));+#3201 = VECTOR('',#3202,1.);+#3202 = DIRECTION('',(0.,0.,1.));+#3203 = DEFINITIONAL_REPRESENTATION('',(#3204),#3213);+#3204 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3205,#3206,#3207,#3208,#3209,+ #3210,#3211,#3212),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.812174222414,+ 1.),.UNSPECIFIED.);+#3205 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3206 = CARTESIAN_POINT('',(0.797486090688,-5.00001E-02));+#3207 = CARTESIAN_POINT('',(0.594489037699,-5.00001E-02));+#3208 = CARTESIAN_POINT('',(0.391244681847,-5.00001E-02));+#3209 = CARTESIAN_POINT('',(0.140997042562,-5.00001E-02));+#3210 = CARTESIAN_POINT('',(9.3994039597E-02,-5.00001E-02));+#3211 = CARTESIAN_POINT('',(4.699401870176E-02,-5.00001E-02));+#3212 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3214 = ORIENTED_EDGE('',*,*,#3215,.T.);+#3215 = EDGE_CURVE('',#3171,#3216,#3218,.T.);+#3216 = VERTEX_POINT('',#3217);+#3217 = CARTESIAN_POINT('',(0.76089305227,8.760748334276E-02,1.75));+#3218 = SURFACE_CURVE('',#3219,(#3228,#3240),.PCURVE_S1.);+#3219 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3220,#3221,#3222,#3223,#3224,+ #3225,#3226,#3227),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203824955432,+ 1.),.UNSPECIFIED.);+#3220 = CARTESIAN_POINT('',(0.876862670508,4.443401133572E-02,1.75));+#3221 = CARTESIAN_POINT('',(0.872491785204,4.883703550232E-02,1.75));+#3222 = CARTESIAN_POINT('',(0.867910464709,5.294136911363E-02,1.75));+#3223 = CARTESIAN_POINT('',(0.863118897011,5.674647315952E-02,1.75));+#3224 = CARTESIAN_POINT('',(0.838581005798,7.394558176029E-02,1.75));+#3225 = CARTESIAN_POINT('',(0.815842273161,8.306928432218E-02,1.75));+#3226 = CARTESIAN_POINT('',(0.789924363956,8.760748334276E-02,1.75));+#3227 = CARTESIAN_POINT('',(0.76089305227,8.760748334276E-02,1.75));+#3228 = PCURVE('',#2438,#3229);+#3229 = DEFINITIONAL_REPRESENTATION('',(#3230),#3239);+#3230 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3231,#3232,#3233,#3234,#3235,+ #3236,#3237,#3238),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203824955432,+ 1.),.UNSPECIFIED.);+#3231 = CARTESIAN_POINT('',(3.303668500135,-0.730240202206));+#3232 = CARTESIAN_POINT('',(3.297527258859,-0.729359057644));+#3233 = CARTESIAN_POINT('',(3.291500193088,-0.728130835322));+#3234 = CARTESIAN_POINT('',(3.285587847559,-0.726555364551));+#3235 = CARTESIAN_POINT('',(3.257145873144,-0.717122892275));+#3236 = CARTESIAN_POINT('',(3.236258204042,-0.704316753519));+#3237 = CARTESIAN_POINT('',(3.217154040843,-0.686223544395));+#3238 = CARTESIAN_POINT('',(3.199834658232,-0.662924273073));+#3239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3240 = PCURVE('',#3241,#3248);+#3241 = SURFACE_OF_LINEAR_EXTRUSION('',#3242,#3246);+#3242 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3243,#3244,#3245),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3243 = CARTESIAN_POINT('',(0.76089305227,8.760748334276E-02,1.8000001)+ );+#3244 = CARTESIAN_POINT('',(0.834004333333,8.760748334276E-02,1.8000001)+ );+#3245 = CARTESIAN_POINT('',(0.876862670508,4.443401133572E-02,1.8000001)+ );+#3246 = VECTOR('',#3247,1.);+#3247 = DIRECTION('',(0.,0.,1.));+#3248 = DEFINITIONAL_REPRESENTATION('',(#3249),#3258);+#3249 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3250,#3251,#3252,#3253,#3254,+ #3255,#3256,#3257),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203824955432,+ 1.),.UNSPECIFIED.);+#3250 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3251 = CARTESIAN_POINT('',(0.949007759141,-5.00001E-02));+#3252 = CARTESIAN_POINT('',(0.898007764486,-5.00001E-02));+#3253 = CARTESIAN_POINT('',(0.847003884714,-5.00001E-02));+#3254 = CARTESIAN_POINT('',(0.596770126016,-5.00001E-02));+#3255 = CARTESIAN_POINT('',(0.397539695064,-5.00001E-02));+#3256 = CARTESIAN_POINT('',(0.198541943619,-5.00001E-02));+#3257 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3259 = ORIENTED_EDGE('',*,*,#3260,.T.);+#3260 = EDGE_CURVE('',#3216,#3261,#3263,.T.);+#3261 = VERTEX_POINT('',#3262);+#3262 = CARTESIAN_POINT('',(0.733318754455,8.52439721015E-02,1.75));+#3263 = SURFACE_CURVE('',#3264,(#3270,#3279),.PCURVE_S1.);+#3264 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3265,#3266,#3267,#3268,#3269),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3265 = CARTESIAN_POINT('',(0.76089305227,8.760748334276E-02,1.75));+#3266 = CARTESIAN_POINT('',(0.75396009032,8.760748334276E-02,1.75));+#3267 = CARTESIAN_POINT('',(0.747053369391,8.721356529766E-02,1.75));+#3268 = CARTESIAN_POINT('',(0.740172915743,8.642572404767E-02,1.75));+#3269 = CARTESIAN_POINT('',(0.733318754455,8.52439721015E-02,1.75));+#3270 = PCURVE('',#2438,#3271);+#3271 = DEFINITIONAL_REPRESENTATION('',(#3272),#3278);+#3272 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3273,#3274,#3275,#3276,#3277),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3273 = CARTESIAN_POINT('',(3.199834658232,-0.662924273073));+#3274 = CARTESIAN_POINT('',(3.195698619807,-0.657360178578));+#3275 = CARTESIAN_POINT('',(3.191894377679,-0.651582141952));+#3276 = CARTESIAN_POINT('',(3.188421951655,-0.645590181193));+#3277 = CARTESIAN_POINT('',(3.185281346656,-0.63938432389));+#3278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3279 = PCURVE('',#3280,#3287);+#3280 = SURFACE_OF_LINEAR_EXTRUSION('',#3281,#3285);+#3281 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3282,#3283,#3284),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3282 = CARTESIAN_POINT('',(0.733318754455,8.52439721015E-02,1.8000001)+ );+#3283 = CARTESIAN_POINT('',(0.747027119655,8.760748334276E-02,1.8000001)+ );+#3284 = CARTESIAN_POINT('',(0.76089305227,8.760748334276E-02,1.8000001)+ );+#3285 = VECTOR('',#3286,1.);+#3286 = DIRECTION('',(0.,0.,1.));+#3287 = DEFINITIONAL_REPRESENTATION('',(#3288),#3294);+#3288 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3289,#3290,#3291,#3292,#3293),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3289 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3290 = CARTESIAN_POINT('',(0.750000157116,-5.00001E-02));+#3291 = CARTESIAN_POINT('',(0.499999586513,-5.00001E-02));+#3292 = CARTESIAN_POINT('',(0.249999222668,-5.00001E-02));+#3293 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3295 = ORIENTED_EDGE('',*,*,#3296,.T.);+#3296 = EDGE_CURVE('',#3261,#3297,#3299,.T.);+#3297 = VERTEX_POINT('',#3298);+#3298 = CARTESIAN_POINT('',(0.706059591473,7.783830354555E-02,1.75));+#3299 = SURFACE_CURVE('',#3300,(#3306,#3315),.PCURVE_S1.);+#3300 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3301,#3302,#3303,#3304,#3305),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3301 = CARTESIAN_POINT('',(0.733318754455,8.52439721015E-02,1.75));+#3302 = CARTESIAN_POINT('',(0.726464481849,8.406220096238E-02,1.75));+#3303 = CARTESIAN_POINT('',(0.719636509257,8.243398365285E-02,1.75));+#3304 = CARTESIAN_POINT('',(0.7128348689,8.035933700694E-02,1.75));+#3305 = CARTESIAN_POINT('',(0.706059591473,7.783830354555E-02,1.75));+#3306 = PCURVE('',#2438,#3307);+#3307 = DEFINITIONAL_REPRESENTATION('',(#3308),#3314);+#3308 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3309,#3310,#3311,#3312,#3313),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3309 = CARTESIAN_POINT('',(3.185281346656,-0.63938432389));+#3310 = CARTESIAN_POINT('',(3.18214069065,-0.633178365797));+#3311 = CARTESIAN_POINT('',(3.179374022931,-0.626727175904));+#3312 = CARTESIAN_POINT('',(3.176981349207,-0.62003079011));+#3313 = CARTESIAN_POINT('',(3.174962653667,-0.613089258417));+#3314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3315 = PCURVE('',#3316,#3323);+#3316 = SURFACE_OF_LINEAR_EXTRUSION('',#3317,#3321);+#3317 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3318,#3319,#3320),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3318 = CARTESIAN_POINT('',(0.706059591473,7.783830354555E-02,1.8000001)+ );+#3319 = CARTESIAN_POINT('',(0.719610389256,8.288046086024E-02,1.8000001)+ );+#3320 = CARTESIAN_POINT('',(0.733318754455,8.52439721015E-02,1.8000001)+ );+#3321 = VECTOR('',#3322,1.);+#3322 = DIRECTION('',(0.,0.,1.));+#3323 = DEFINITIONAL_REPRESENTATION('',(#3324),#3330);+#3324 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3325,#3326,#3327,#3328,#3329),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3325 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3326 = CARTESIAN_POINT('',(0.749996717069,-5.00001E-02));+#3327 = CARTESIAN_POINT('',(0.499994823431,-5.00001E-02));+#3328 = CARTESIAN_POINT('',(0.249995518192,-5.00001E-02));+#3329 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3331 = ORIENTED_EDGE('',*,*,#3332,.T.);+#3332 = EDGE_CURVE('',#3297,#3333,#3335,.T.);+#3333 = VERTEX_POINT('',#3334);+#3334 = CARTESIAN_POINT('',(0.706059591473,0.193492786951,1.75));+#3335 = SURFACE_CURVE('',#3336,(#3340,#3347),.PCURVE_S1.);+#3336 = LINE('',#3337,#3338);+#3337 = CARTESIAN_POINT('',(0.706059591473,1.226832033858,1.75));+#3338 = VECTOR('',#3339,1.);+#3339 = DIRECTION('',(0.,1.,0.));+#3340 = PCURVE('',#2438,#3341);+#3341 = DEFINITIONAL_REPRESENTATION('',(#3342),#3346);+#3342 = LINE('',#3343,#3344);+#3343 = CARTESIAN_POINT('',(2.252830131383,-1.298551295034));+#3344 = VECTOR('',#3345,1.);+#3345 = DIRECTION('',(-0.802556617983,-0.596575959062));+#3346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3347 = PCURVE('',#3348,#3353);+#3348 = PLANE('',#3349);+#3349 = AXIS2_PLACEMENT_3D('',#3350,#3351,#3352);+#3350 = CARTESIAN_POINT('',(0.706059591473,0.193492786951,1.8000001));+#3351 = DIRECTION('',(-1.,0.,0.));+#3352 = DIRECTION('',(0.,-1.,0.));+#3353 = DEFINITIONAL_REPRESENTATION('',(#3354),#3357);+#3354 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3355,#3356),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.148993730313,-1.033339246907),.PIECEWISE_BEZIER_KNOTS.);+#3355 = CARTESIAN_POINT('',(0.115654483406,-5.00001E-02));+#3356 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3358 = ORIENTED_EDGE('',*,*,#3359,.T.);+#3359 = EDGE_CURVE('',#3333,#3360,#3362,.T.);+#3360 = VERTEX_POINT('',#3361);+#3361 = CARTESIAN_POINT('',(0.886316715473,0.193492786951,1.75));+#3362 = SURFACE_CURVE('',#3363,(#3367,#3374),.PCURVE_S1.);+#3363 = LINE('',#3364,#3365);+#3364 = CARTESIAN_POINT('',(-0.396884462454,0.193492786951,1.75));+#3365 = VECTOR('',#3366,1.);+#3366 = DIRECTION('',(1.,-0.,0.));+#3367 = PCURVE('',#2438,#3368);+#3368 = DEFINITIONAL_REPRESENTATION('',(#3369),#3373);+#3369 = LINE('',#3370,#3371);+#3370 = CARTESIAN_POINT('',(2.424153475846,0.20308910697));+#3371 = VECTOR('',#3372,1.);+#3372 = DIRECTION('',(0.596575959062,-0.802556617983));+#3373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3374 = PCURVE('',#3375,#3380);+#3375 = PLANE('',#3376);+#3376 = AXIS2_PLACEMENT_3D('',#3377,#3378,#3379);+#3377 = CARTESIAN_POINT('',(0.886316715473,0.193492786951,1.8000001));+#3378 = DIRECTION('',(0.,1.,0.));+#3379 = DIRECTION('',(-1.,0.,0.));+#3380 = DEFINITIONAL_REPRESENTATION('',(#3381),#3384);+#3381 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3382,#3383),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.102944053927,1.283201177928),.PIECEWISE_BEZIER_KNOTS.);+#3382 = CARTESIAN_POINT('',(0.180257124,-5.00001E-02));+#3383 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3385 = ORIENTED_EDGE('',*,*,#3386,.T.);+#3386 = EDGE_CURVE('',#3360,#2629,#3387,.T.);+#3387 = SURFACE_CURVE('',#3388,(#3392,#3399),.PCURVE_S1.);+#3388 = LINE('',#3389,#3390);+#3389 = CARTESIAN_POINT('',(0.886316715473,1.253618494592,1.75));+#3390 = VECTOR('',#3391,1.);+#3391 = DIRECTION('',(0.,1.,0.));+#3392 = PCURVE('',#2438,#3393);+#3393 = DEFINITIONAL_REPRESENTATION('',(#3394),#3398);+#3394 = LINE('',#3395,#3396);+#3395 = CARTESIAN_POINT('',(2.338869546676,-1.459198001342));+#3396 = VECTOR('',#3397,1.);+#3397 = DIRECTION('',(-0.802556617983,-0.596575959062));+#3398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3399 = PCURVE('',#3400,#3405);+#3400 = PLANE('',#3401);+#3401 = AXIS2_PLACEMENT_3D('',#3402,#3403,#3404);+#3402 = CARTESIAN_POINT('',(0.886316715473,0.24706570842,1.8000001));+#3403 = DIRECTION('',(-1.,0.,0.));+#3404 = DIRECTION('',(0.,-1.,0.));+#3405 = DEFINITIONAL_REPRESENTATION('',(#3406),#3409);+#3406 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3407,#3408),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.060125707641,-1.006552786173),.PIECEWISE_BEZIER_KNOTS.);+#3407 = CARTESIAN_POINT('',(5.35729214686E-02,-5.00001E-02));+#3408 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3410 = FACE_BOUND('',#3411,.F.);+#3411 = EDGE_LOOP('',(#3412,#3441,#3468,#3504,#3540,#3576,#3621,#3657,+ #3693,#3729,#3765,#3792,#3828,#3864,#3909,#3954,#3999,#4044,#4080,+ #4116,#4143,#4170));+#3412 = ORIENTED_EDGE('',*,*,#3413,.T.);+#3413 = EDGE_CURVE('',#3414,#3416,#3418,.T.);+#3414 = VERTEX_POINT('',#3415);+#3415 = CARTESIAN_POINT('',(0.49775546741,0.24706570842,1.75));+#3416 = VERTEX_POINT('',#3417);+#3417 = CARTESIAN_POINT('',(0.259513534291,0.24706570842,1.75));+#3418 = SURFACE_CURVE('',#3419,(#3423,#3430),.PCURVE_S1.);+#3419 = LINE('',#3420,#3421);+#3420 = CARTESIAN_POINT('',(-0.710286053046,0.24706570842,1.75));+#3421 = VECTOR('',#3422,1.);+#3422 = DIRECTION('',(-1.,-0.,-0.));+#3423 = PCURVE('',#2438,#3424);+#3424 = DEFINITIONAL_REPRESENTATION('',(#3425),#3429);+#3425 = LINE('',#3426,#3427);+#3426 = CARTESIAN_POINT('',(2.194190318698,0.422651310581));+#3427 = VECTOR('',#3428,1.);+#3428 = DIRECTION('',(-0.596575959062,0.802556617983));+#3429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3430 = PCURVE('',#3431,#3436);+#3431 = PLANE('',#3432);+#3432 = AXIS2_PLACEMENT_3D('',#3433,#3434,#3435);+#3433 = CARTESIAN_POINT('',(0.259513534291,0.24706570842,1.8000001));+#3434 = DIRECTION('',(0.,-1.,0.));+#3435 = DIRECTION('',(1.,0.,0.));+#3436 = DEFINITIONAL_REPRESENTATION('',(#3437),#3440);+#3437 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3438,#3439),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.208041520455,-0.969799587336),.PIECEWISE_BEZIER_KNOTS.);+#3438 = CARTESIAN_POINT('',(0.238241933119,-5.00001E-02));+#3439 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3441 = ORIENTED_EDGE('',*,*,#3442,.T.);+#3442 = EDGE_CURVE('',#3416,#3443,#3445,.T.);+#3443 = VERTEX_POINT('',#3444);+#3444 = CARTESIAN_POINT('',(0.259513534291,1.071458429372E-02,1.75));+#3445 = SURFACE_CURVE('',#3446,(#3450,#3457),.PCURVE_S1.);+#3446 = LINE('',#3447,#3448);+#3447 = CARTESIAN_POINT('',(0.259513534291,1.135442932529,1.75));+#3448 = VECTOR('',#3449,1.);+#3449 = DIRECTION('',(0.,-1.,0.));+#3450 = PCURVE('',#2438,#3451);+#3451 = DEFINITIONAL_REPRESENTATION('',(#3452),#3456);+#3452 = LINE('',#3453,#3454);+#3453 = CARTESIAN_POINT('',(2.059776417137,-0.885652260835));+#3454 = VECTOR('',#3455,1.);+#3455 = DIRECTION('',(0.802556617983,0.596575959062));+#3456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3457 = PCURVE('',#3458,#3463);+#3458 = PLANE('',#3459);+#3459 = AXIS2_PLACEMENT_3D('',#3460,#3461,#3462);+#3460 = CARTESIAN_POINT('',(0.259513534291,1.071458429372E-02,1.8000001)+ );+#3461 = DIRECTION('',(1.,0.,0.));+#3462 = DIRECTION('',(0.,1.,0.));+#3463 = DEFINITIONAL_REPRESENTATION('',(#3464),#3467);+#3464 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3465,#3466),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.888377224109,1.124728348236),.PIECEWISE_BEZIER_KNOTS.);+#3465 = CARTESIAN_POINT('',(0.236351124126,-5.00001E-02));+#3466 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3468 = ORIENTED_EDGE('',*,*,#3469,.T.);+#3469 = EDGE_CURVE('',#3443,#3470,#3472,.T.);+#3470 = VERTEX_POINT('',#3471);+#3471 = CARTESIAN_POINT('',(0.305838354619,2.820456747906E-02,1.75));+#3472 = SURFACE_CURVE('',#3473,(#3479,#3488),.PCURVE_S1.);+#3473 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3474,#3475,#3476,#3477,#3478),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3474 = CARTESIAN_POINT('',(0.259513534291,1.071458429372E-02,1.75));+#3475 = CARTESIAN_POINT('',(0.270543113373,1.654450466588E-02,1.75));+#3476 = CARTESIAN_POINT('',(0.281940623788,2.140293375841E-02,1.75));+#3477 = CARTESIAN_POINT('',(0.293705823037,2.52896085925E-02,1.75));+#3478 = CARTESIAN_POINT('',(0.305838354619,2.820456747905E-02,1.75));+#3479 = PCURVE('',#2438,#3480);+#3480 = DEFINITIONAL_REPRESENTATION('',(#3481),#3487);+#3481 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3482,#3483,#3484,#3485,#3486),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3482 = CARTESIAN_POINT('',(2.962434596447,-0.214666367802));+#3483 = CARTESIAN_POINT('',(2.964335736989,-0.226996219826));+#3484 = CARTESIAN_POINT('',(2.967236053275,-0.239041789233));+#3485 = CARTESIAN_POINT('',(2.97113561169,-0.250802724519));+#3486 = CARTESIAN_POINT('',(2.976034168809,-0.262278762427));+#3487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3488 = PCURVE('',#3489,#3496);+#3489 = SURFACE_OF_LINEAR_EXTRUSION('',#3490,#3494);+#3490 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3491,#3492,#3493),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3491 = CARTESIAN_POINT('',(0.305838354619,2.820456747906E-02,1.8000001)+ );+#3492 = CARTESIAN_POINT('',(0.281572972542,2.237457308394E-02,1.8000001)+ );+#3493 = CARTESIAN_POINT('',(0.259513534291,1.071458429372E-02,1.8000001)+ );+#3494 = VECTOR('',#3495,1.);+#3495 = DIRECTION('',(0.,0.,1.));+#3496 = DEFINITIONAL_REPRESENTATION('',(#3497),#3503);+#3497 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3498,#3499,#3500,#3501,#3502),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3498 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3499 = CARTESIAN_POINT('',(0.750003174229,-5.00001E-02));+#3500 = CARTESIAN_POINT('',(0.4999999257,-5.00001E-02));+#3501 = CARTESIAN_POINT('',(0.24999671432,-5.00001E-02));+#3502 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3504 = ORIENTED_EDGE('',*,*,#3505,.T.);+#3505 = EDGE_CURVE('',#3470,#3506,#3508,.T.);+#3506 = VERTEX_POINT('',#3507);+#3507 = CARTESIAN_POINT('',(0.355629658102,3.403456187417E-02,1.75));+#3508 = SURFACE_CURVE('',#3509,(#3515,#3524),.PCURVE_S1.);+#3509 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3510,#3511,#3512,#3513,#3514),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3510 = CARTESIAN_POINT('',(0.305838354619,2.820456747905E-02,1.75));+#3511 = CARTESIAN_POINT('',(0.317971250376,3.111961386221E-02,1.75));+#3512 = CARTESIAN_POINT('',(0.330314298014,3.306297490806E-02,1.75));+#3513 = CARTESIAN_POINT('',(0.34286721468,3.403456187417E-02,1.75));+#3514 = CARTESIAN_POINT('',(0.355629658102,3.403456187417E-02,1.75));+#3515 = PCURVE('',#2438,#3516);+#3516 = DEFINITIONAL_REPRESENTATION('',(#3517),#3523);+#3517 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3518,#3519,#3520,#3521,#3522),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3518 = CARTESIAN_POINT('',(2.976034168809,-0.262278762427));+#3519 = CARTESIAN_POINT('',(2.980932872965,-0.273755144803));+#3520 = CARTESIAN_POINT('',(2.986736781178,-0.284820501851));+#3521 = CARTESIAN_POINT('',(2.993445795928,-0.295474553622));+#3522 = CARTESIAN_POINT('',(3.001059562852,-0.305717137052));+#3523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3524 = PCURVE('',#3525,#3532);+#3525 = SURFACE_OF_LINEAR_EXTRUSION('',#3526,#3530);+#3526 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3527,#3528,#3529),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3527 = CARTESIAN_POINT('',(0.355629658102,3.403456187417E-02,1.8000001)+ );+#3528 = CARTESIAN_POINT('',(0.330103736696,3.403456187417E-02,1.8000001)+ );+#3529 = CARTESIAN_POINT('',(0.305838354619,2.820456747906E-02,1.8000001)+ );+#3530 = VECTOR('',#3531,1.);+#3531 = DIRECTION('',(0.,0.,1.));+#3532 = DEFINITIONAL_REPRESENTATION('',(#3533),#3539);+#3533 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3534,#3535,#3536,#3537,#3538),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3534 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3535 = CARTESIAN_POINT('',(0.749995781677,-5.00001E-02));+#3536 = CARTESIAN_POINT('',(0.499990432077,-5.00001E-02));+#3537 = CARTESIAN_POINT('',(0.249989867532,-5.00001E-02));+#3538 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3540 = ORIENTED_EDGE('',*,*,#3541,.T.);+#3541 = EDGE_CURVE('',#3506,#3542,#3544,.T.);+#3542 = VERTEX_POINT('',#3543);+#3543 = CARTESIAN_POINT('',(0.437722281882,5.987561811196E-03,1.75));+#3544 = SURFACE_CURVE('',#3545,(#3551,#3560),.PCURVE_S1.);+#3545 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3546,#3547,#3548,#3549,#3550),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3546 = CARTESIAN_POINT('',(0.355629658102,3.403456187417E-02,1.75));+#3547 = CARTESIAN_POINT('',(0.381902880321,3.403456187417E-02,1.75));+#3548 = CARTESIAN_POINT('',(0.404369823998,2.937448774631E-02,1.75));+#3549 = CARTESIAN_POINT('',(0.422979877145,2.002043904742E-02,1.75));+#3550 = CARTESIAN_POINT('',(0.437722281882,5.987561811196E-03,1.75));+#3551 = PCURVE('',#2438,#3552);+#3552 = DEFINITIONAL_REPRESENTATION('',(#3553),#3559);+#3553 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3554,#3555,#3556,#3557,#3558),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3554 = CARTESIAN_POINT('',(3.001059562852,-0.305717137052));+#3555 = CARTESIAN_POINT('',(3.016733535596,-0.32680288542));+#3556 = CARTESIAN_POINT('',(3.033876747399,-0.342053791562));+#3557 = CARTESIAN_POINT('',(3.052486211391,-0.351409012302));+#3558 = CARTESIAN_POINT('',(3.072543354131,-0.354868949593));+#3559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3560 = PCURVE('',#3561,#3568);+#3561 = SURFACE_OF_LINEAR_EXTRUSION('',#3562,#3566);+#3562 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3563,#3564,#3565),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3563 = CARTESIAN_POINT('',(0.437722281882,5.987561811196E-03,1.8000001)+ );+#3564 = CARTESIAN_POINT('',(0.408257175074,3.403456187417E-02,1.8000001)+ );+#3565 = CARTESIAN_POINT('',(0.355629658102,3.403456187417E-02,1.8000001)+ );+#3566 = VECTOR('',#3567,1.);+#3567 = DIRECTION('',(0.,0.,1.));+#3568 = DEFINITIONAL_REPRESENTATION('',(#3569),#3575);+#3569 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3570,#3571,#3572,#3573,#3574),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3570 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3571 = CARTESIAN_POINT('',(0.750385124254,-5.00001E-02));+#3572 = CARTESIAN_POINT('',(0.500369225963,-5.00001E-02));+#3573 = CARTESIAN_POINT('',(0.250167169478,-5.00001E-02));+#3574 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3576 = ORIENTED_EDGE('',*,*,#3577,.T.);+#3577 = EDGE_CURVE('',#3542,#3578,#3580,.T.);+#3578 = VERTEX_POINT('',#3579);+#3579 = CARTESIAN_POINT('',(0.467187388689,-7.248101139869E-02,1.75));+#3580 = SURFACE_CURVE('',#3581,(#3590,#3602),.PCURVE_S1.);+#3581 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3582,#3583,#3584,#3585,#3586,+ #3587,#3588,#3589),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174915340045,+ 1.),.UNSPECIFIED.);+#3582 = CARTESIAN_POINT('',(0.437722281882,5.987561811196E-03,1.75));+#3583 = CARTESIAN_POINT('',(0.44030033457,3.533586524724E-03,1.75));+#3584 = CARTESIAN_POINT('',(0.44272815307,9.652835735698E-04,1.75));+#3585 = CARTESIAN_POINT('',(0.44500562809,-1.717307620344E-03,1.75));+#3586 = CARTESIAN_POINT('',(0.457166209765,-1.770676795288E-02,1.75));+#3587 = CARTESIAN_POINT('',(0.463853165327,-3.344069968899E-02,1.75));+#3588 = CARTESIAN_POINT('',(0.467187388689,-5.170767254346E-02,1.75));+#3589 = CARTESIAN_POINT('',(0.467187388689,-7.248101139869E-02,1.75));+#3590 = PCURVE('',#2438,#3591);+#3591 = DEFINITIONAL_REPRESENTATION('',(#3592),#3601);+#3592 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3593,#3594,#3595,#3596,#3597,+ #3598,#3599,#3600),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174915340045,+ 1.),.UNSPECIFIED.);+#3593 = CARTESIAN_POINT('',(3.072543354131,-0.354868949593));+#3594 = CARTESIAN_POINT('',(3.076050812493,-0.35547400018));+#3595 = CARTESIAN_POINT('',(3.079560399173,-0.355890274187));+#3596 = CARTESIAN_POINT('',(3.083072017333,-0.356117707422));+#3597 = CARTESIAN_POINT('',(3.103159175216,-0.356338335092));+#3598 = CARTESIAN_POINT('',(3.119775823186,-0.352318510117));+#3599 = CARTESIAN_POINT('',(3.136425220641,-0.344096776293));+#3600 = CARTESIAN_POINT('',(3.153097001217,-0.331703901742));+#3601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3602 = PCURVE('',#3603,#3610);+#3603 = SURFACE_OF_LINEAR_EXTRUSION('',#3604,#3608);+#3604 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3605,#3606,#3607),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3605 = CARTESIAN_POINT('',(0.467187388689,-7.248101139869E-02,1.8000001+ ));+#3606 = CARTESIAN_POINT('',(0.467187388689,-2.205943825177E-02,1.8000001+ ));+#3607 = CARTESIAN_POINT('',(0.437722281882,5.987561811196E-03,1.8000001)+ );+#3608 = VECTOR('',#3609,1.);+#3609 = DIRECTION('',(0.,0.,1.));+#3610 = DEFINITIONAL_REPRESENTATION('',(#3611),#3620);+#3611 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3612,#3613,#3614,#3615,#3616,+ #3617,#3618,#3619),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174915340045,+ 1.),.UNSPECIFIED.);+#3612 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3613 = CARTESIAN_POINT('',(0.956252446234,-5.00001E-02));+#3614 = CARTESIAN_POINT('',(0.912502452164,-5.00001E-02));+#3615 = CARTESIAN_POINT('',(0.868751231681,-5.00001E-02));+#3616 = CARTESIAN_POINT('',(0.618623188767,-5.00001E-02));+#3617 = CARTESIAN_POINT('',(0.412245981851,-5.00001E-02));+#3618 = CARTESIAN_POINT('',(0.20599653639,-5.00001E-02));+#3619 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3621 = ORIENTED_EDGE('',*,*,#3622,.T.);+#3622 = EDGE_CURVE('',#3578,#3623,#3625,.T.);+#3623 = VERTEX_POINT('',#3624);+#3624 = CARTESIAN_POINT('',(0.438667686378,-0.151264719441,1.75));+#3625 = SURFACE_CURVE('',#3626,(#3632,#3641),.PCURVE_S1.);+#3626 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3627,#3628,#3629,#3630,#3631),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3627 = CARTESIAN_POINT('',(0.467187388689,-7.248101139869E-02,1.75));+#3628 = CARTESIAN_POINT('',(0.467187388689,-9.796959948065E-02,1.75));+#3629 = CARTESIAN_POINT('',(0.46244803217,-0.119622937727,1.75));+#3630 = CARTESIAN_POINT('',(0.452935626724,-0.137390921093,1.75));+#3631 = CARTESIAN_POINT('',(0.438667686378,-0.151264719441,1.75));+#3632 = PCURVE('',#2438,#3633);+#3633 = DEFINITIONAL_REPRESENTATION('',(#3634),#3640);+#3634 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3635,#3636,#3637,#3638,#3639),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3635 = CARTESIAN_POINT('',(3.153097001217,-0.331703901742));+#3636 = CARTESIAN_POINT('',(3.173553036265,-0.316498022862));+#3637 = CARTESIAN_POINT('',(3.188103680015,-0.299776559891));+#3638 = CARTESIAN_POINT('',(3.196688620252,-0.28154236423));+#3639 = CARTESIAN_POINT('',(3.199311218737,-0.261814759726));+#3640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3641 = PCURVE('',#3642,#3649);+#3642 = SURFACE_OF_LINEAR_EXTRUSION('',#3643,#3647);+#3643 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3644,#3645,#3646),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3644 = CARTESIAN_POINT('',(0.438667686378,-0.151264719441,1.8000001));+#3645 = CARTESIAN_POINT('',(0.467187388689,-0.12353285421,1.8000001));+#3646 = CARTESIAN_POINT('',(0.467187388689,-7.248101139869E-02,1.8000001+ ));+#3647 = VECTOR('',#3648,1.);+#3648 = DIRECTION('',(0.,0.,1.));+#3649 = DEFINITIONAL_REPRESENTATION('',(#3650),#3656);+#3650 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3651,#3652,#3653,#3654,#3655),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3651 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3652 = CARTESIAN_POINT('',(0.750365641293,-5.00001E-02));+#3653 = CARTESIAN_POINT('',(0.500339278044,-5.00001E-02));+#3654 = CARTESIAN_POINT('',(0.250141817578,-5.00001E-02));+#3655 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3657 = ORIENTED_EDGE('',*,*,#3658,.T.);+#3658 = EDGE_CURVE('',#3623,#3659,#3661,.T.);+#3659 = VERTEX_POINT('',#3660);+#3660 = CARTESIAN_POINT('',(0.357520467095,-0.178996584672,1.75));+#3661 = SURFACE_CURVE('',#3662,(#3668,#3677),.PCURVE_S1.);+#3662 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3663,#3664,#3665,#3666,#3667),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3663 = CARTESIAN_POINT('',(0.438667686378,-0.151264719441,1.75));+#3664 = CARTESIAN_POINT('',(0.424397400566,-0.165140798462,1.75));+#3665 = CARTESIAN_POINT('',(0.406101670228,-0.174389618774,1.75));+#3666 = CARTESIAN_POINT('',(0.383791565553,-0.178996584672,1.75));+#3667 = CARTESIAN_POINT('',(0.357520467095,-0.178996584672,1.75));+#3668 = PCURVE('',#2438,#3669);+#3669 = DEFINITIONAL_REPRESENTATION('',(#3670),#3676);+#3670 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3671,#3672,#3673,#3674,#3675),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3671 = CARTESIAN_POINT('',(3.199311218737,-0.261814759726));+#3672 = CARTESIAN_POINT('',(3.201934248343,-0.242083912256));+#3673 = CARTESIAN_POINT('',(3.198442157419,-0.221882928945));+#3674 = CARTESIAN_POINT('',(3.188829836296,-0.201229401692));+#3675 = CARTESIAN_POINT('',(3.173157130538,-0.180145357762));+#3676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3677 = PCURVE('',#3678,#3685);+#3678 = SURFACE_OF_LINEAR_EXTRUSION('',#3679,#3683);+#3679 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3680,#3681,#3682),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3680 = CARTESIAN_POINT('',(0.357520467095,-0.178996584672,1.8000001));+#3681 = CARTESIAN_POINT('',(0.410147984067,-0.178996584672,1.8000001));+#3682 = CARTESIAN_POINT('',(0.438667686378,-0.151264719441,1.8000001));+#3683 = VECTOR('',#3684,1.);+#3684 = DIRECTION('',(0.,0.,1.));+#3685 = DEFINITIONAL_REPRESENTATION('',(#3686),#3692);+#3686 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3687,#3688,#3689,#3690,#3691),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3687 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3688 = CARTESIAN_POINT('',(0.749817062318,-5.00001E-02));+#3689 = CARTESIAN_POINT('',(0.499606720745,-5.00001E-02));+#3690 = CARTESIAN_POINT('',(0.249594698458,-5.00001E-02));+#3691 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3693 = ORIENTED_EDGE('',*,*,#3694,.T.);+#3694 = EDGE_CURVE('',#3659,#3695,#3697,.T.);+#3695 = VERTEX_POINT('',#3696);+#3696 = CARTESIAN_POINT('',(0.297644848983,-0.171275781283,1.75));+#3697 = SURFACE_CURVE('',#3698,(#3704,#3713),.PCURVE_S1.);+#3698 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3699,#3700,#3701,#3702,#3703),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3699 = CARTESIAN_POINT('',(0.357520467095,-0.178996584672,1.75));+#3700 = CARTESIAN_POINT('',(0.342236979961,-0.178996584672,1.75));+#3701 = CARTESIAN_POINT('',(0.327162785226,-0.177709877098,1.75));+#3702 = CARTESIAN_POINT('',(0.312298552455,-0.175136165532,1.75));+#3703 = CARTESIAN_POINT('',(0.297644848983,-0.171275781283,1.75));+#3704 = PCURVE('',#2438,#3705);+#3705 = DEFINITIONAL_REPRESENTATION('',(#3706),#3712);+#3706 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3707,#3708,#3709,#3710,#3711),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3707 = CARTESIAN_POINT('',(3.173157130538,-0.180145357762));+#3708 = CARTESIAN_POINT('',(3.164039369543,-0.167879494017));+#3709 = CARTESIAN_POINT('',(3.154013811684,-0.156549218076));+#3710 = CARTESIAN_POINT('',(3.143080618512,-0.146155244141));+#3711 = CARTESIAN_POINT('',(3.131240394383,-0.136697829877));+#3712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3713 = PCURVE('',#3714,#3721);+#3714 = SURFACE_OF_LINEAR_EXTRUSION('',#3715,#3719);+#3715 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3716,#3717,#3718),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3716 = CARTESIAN_POINT('',(0.297644848983,-0.171275781283,1.8000001));+#3717 = CARTESIAN_POINT('',(0.326952388375,-0.178996584672,1.8000001));+#3718 = CARTESIAN_POINT('',(0.357520467095,-0.178996584672,1.8000001));+#3719 = VECTOR('',#3720,1.);+#3720 = DIRECTION('',(0.,0.,1.));+#3721 = DEFINITIONAL_REPRESENTATION('',(#3722),#3728);+#3722 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3723,#3724,#3725,#3726,#3727),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3723 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3724 = CARTESIAN_POINT('',(0.750009032729,-5.00001E-02));+#3725 = CARTESIAN_POINT('',(0.500005269321,-5.00001E-02));+#3726 = CARTESIAN_POINT('',(0.249998870199,-5.00001E-02));+#3727 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3729 = ORIENTED_EDGE('',*,*,#3730,.T.);+#3730 = EDGE_CURVE('',#3695,#3731,#3733,.T.);+#3731 = VERTEX_POINT('',#3732);+#3732 = CARTESIAN_POINT('',(0.239344905032,-0.147798236287,1.75));+#3733 = SURFACE_CURVE('',#3734,(#3740,#3749),.PCURVE_S1.);+#3734 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3735,#3736,#3737,#3738,#3739),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3735 = CARTESIAN_POINT('',(0.297644848983,-0.171275781283,1.75));+#3736 = CARTESIAN_POINT('',(0.282988908004,-0.167414807585,1.75));+#3737 = CARTESIAN_POINT('',(0.268386533332,-0.162214384735,1.75));+#3738 = CARTESIAN_POINT('',(0.253838337928,-0.155675101991,1.75));+#3739 = CARTESIAN_POINT('',(0.239344905032,-0.147798236287,1.75));+#3740 = PCURVE('',#2438,#3741);+#3741 = DEFINITIONAL_REPRESENTATION('',(#3742),#3748);+#3742 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3743,#3744,#3745,#3746,#3747),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3743 = CARTESIAN_POINT('',(3.131240394383,-0.136697829877));+#3744 = CARTESIAN_POINT('',(3.119398362344,-0.127238971539));+#3745 = CARTESIAN_POINT('',(3.106513302895,-0.118622186356));+#3746 = CARTESIAN_POINT('',(3.092586054626,-0.110847614729));+#3747 = CARTESIAN_POINT('',(3.077617990296,-0.103914962953));+#3748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3749 = PCURVE('',#3750,#3757);+#3750 = SURFACE_OF_LINEAR_EXTRUSION('',#3751,#3755);+#3751 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3752,#3753,#3754),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3752 = CARTESIAN_POINT('',(0.239344905032,-0.147798236287,1.8000001));+#3753 = CARTESIAN_POINT('',(0.268337309591,-0.163554977895,1.8000001));+#3754 = CARTESIAN_POINT('',(0.297644848983,-0.171275781283,1.8000001));+#3755 = VECTOR('',#3756,1.);+#3756 = DIRECTION('',(0.,0.,1.));+#3757 = DEFINITIONAL_REPRESENTATION('',(#3758),#3764);+#3758 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3759,#3760,#3761,#3762,#3763),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3759 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3760 = CARTESIAN_POINT('',(0.749962956926,-5.00001E-02));+#3761 = CARTESIAN_POINT('',(0.499943456523,-5.00001E-02));+#3762 = CARTESIAN_POINT('',(0.249952239497,-5.00001E-02));+#3763 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3765 = ORIENTED_EDGE('',*,*,#3766,.T.);+#3766 = EDGE_CURVE('',#3731,#3767,#3769,.T.);+#3767 = VERTEX_POINT('',#3768);+#3768 = CARTESIAN_POINT('',(0.239344905032,-0.212400876881,1.75));+#3769 = SURFACE_CURVE('',#3770,(#3774,#3781),.PCURVE_S1.);+#3770 = LINE('',#3771,#3772);+#3771 = CARTESIAN_POINT('',(0.239344905032,1.023885201942,1.75));+#3772 = VECTOR('',#3773,1.);+#3773 = DIRECTION('',(0.,-1.,0.));+#3774 = PCURVE('',#2438,#3775);+#3775 = DEFINITIONAL_REPRESENTATION('',(#3776),#3780);+#3776 = LINE('',#3777,#3778);+#3777 = CARTESIAN_POINT('',(2.137275692764,-0.802913133832));+#3778 = VECTOR('',#3779,1.);+#3779 = DIRECTION('',(0.802556617983,0.596575959062));+#3780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3781 = PCURVE('',#3782,#3787);+#3782 = PLANE('',#3783);+#3783 = AXIS2_PLACEMENT_3D('',#3784,#3785,#3786);+#3784 = CARTESIAN_POINT('',(0.239344905032,-0.212400876881,1.8000001));+#3785 = DIRECTION('',(1.,0.,0.));+#3786 = DIRECTION('',(0.,1.,0.));+#3787 = DEFINITIONAL_REPRESENTATION('',(#3788),#3791);+#3788 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3789,#3790),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.171683438229,1.236286078823),.PIECEWISE_BEZIER_KNOTS.);+#3789 = CARTESIAN_POINT('',(6.460264059448E-02,-5.00001E-02));+#3790 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3792 = ORIENTED_EDGE('',*,*,#3793,.T.);+#3793 = EDGE_CURVE('',#3767,#3794,#3796,.T.);+#3794 = VERTEX_POINT('',#3795);+#3795 = CARTESIAN_POINT('',(0.294966202909,-0.227527348825,1.75));+#3796 = SURFACE_CURVE('',#3797,(#3803,#3812),.PCURVE_S1.);+#3797 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3798,#3799,#3800,#3801,#3802),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3798 = CARTESIAN_POINT('',(0.239344905032,-0.212400876881,1.75));+#3799 = CARTESIAN_POINT('',(0.251638357607,-0.217444344604,1.75));+#3800 = CARTESIAN_POINT('',(0.265007315813,-0.221646291788,1.75));+#3801 = CARTESIAN_POINT('',(0.279450535293,-0.225007037335,1.75));+#3802 = CARTESIAN_POINT('',(0.294966202909,-0.227527348825,1.75));+#3803 = PCURVE('',#2438,#3804);+#3804 = DEFINITIONAL_REPRESENTATION('',(#3805),#3811);+#3805 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3806,#3807,#3808,#3809,#3810),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3806 = CARTESIAN_POINT('',(3.129465267044,-6.537458068268E-02));+#3807 = CARTESIAN_POINT('',(3.140846913703,-7.223196081062E-02));+#3808 = CARTESIAN_POINT('',(3.152194813287,-8.045452602381E-02));+#3809 = CARTESIAN_POINT('',(3.16350847938,-9.004108740506E-02));+#3810 = CARTESIAN_POINT('',(3.174787446335,-0.100989731888));+#3811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3812 = PCURVE('',#3813,#3820);+#3813 = SURFACE_OF_LINEAR_EXTRUSION('',#3814,#3818);+#3814 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3815,#3816,#3817),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3815 = CARTESIAN_POINT('',(0.294966202909,-0.227527348825,1.8000001));+#3816 = CARTESIAN_POINT('',(0.263925421941,-0.222485191511,1.8000001));+#3817 = CARTESIAN_POINT('',(0.239344905032,-0.212400876881,1.8000001));+#3818 = VECTOR('',#3819,1.);+#3819 = DIRECTION('',(0.,0.,1.));+#3820 = DEFINITIONAL_REPRESENTATION('',(#3821),#3827);+#3821 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3822,#3823,#3824,#3825,#3826),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3822 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3823 = CARTESIAN_POINT('',(0.749935027398,-5.00001E-02));+#3824 = CARTESIAN_POINT('',(0.499905954591,-5.00001E-02));+#3825 = CARTESIAN_POINT('',(0.249923924785,-5.00001E-02));+#3826 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3828 = ORIENTED_EDGE('',*,*,#3829,.T.);+#3829 = EDGE_CURVE('',#3794,#3830,#3832,.T.);+#3830 = VERTEX_POINT('',#3831);+#3831 = CARTESIAN_POINT('',(0.363508028906,-0.23256950614,1.75));+#3832 = SURFACE_CURVE('',#3833,(#3839,#3848),.PCURVE_S1.);+#3833 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3834,#3835,#3836,#3837,#3838),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3834 = CARTESIAN_POINT('',(0.294966202909,-0.227527348825,1.75));+#3835 = CARTESIAN_POINT('',(0.310492697962,-0.230049419088,1.75));+#3836 = CARTESIAN_POINT('',(0.327093138819,-0.231729881734,1.75));+#3837 = CARTESIAN_POINT('',(0.344765708362,-0.23256950614,1.75));+#3838 = CARTESIAN_POINT('',(0.363508028906,-0.23256950614,1.75));+#3839 = PCURVE('',#2438,#3840);+#3840 = DEFINITIONAL_REPRESENTATION('',(#3841),#3847);+#3841 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3842,#3843,#3844,#3845,#3846),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3842 = CARTESIAN_POINT('',(3.174787446335,-0.100989731888));+#3843 = CARTESIAN_POINT('',(3.186074284192,-0.111946016761));+#3844 = CARTESIAN_POINT('',(3.197326374535,-0.124266286817));+#3845 = CARTESIAN_POINT('',(3.208543250783,-0.137948624726));+#3846 = CARTESIAN_POINT('',(3.219724468637,-0.152990398114));+#3847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3848 = PCURVE('',#3849,#3856);+#3849 = SURFACE_OF_LINEAR_EXTRUSION('',#3850,#3854);+#3850 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3851,#3852,#3853),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3851 = CARTESIAN_POINT('',(0.363508028906,-0.23256950614,1.8000001));+#3852 = CARTESIAN_POINT('',(0.326006983878,-0.23256950614,1.8000001));+#3853 = CARTESIAN_POINT('',(0.294966202909,-0.227527348825,1.8000001));+#3854 = VECTOR('',#3855,1.);+#3855 = DIRECTION('',(0.,0.,1.));+#3856 = DEFINITIONAL_REPRESENTATION('',(#3857),#3863);+#3857 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3858,#3859,#3860,#3861,#3862),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3858 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3859 = CARTESIAN_POINT('',(0.749901668584,-5.00001E-02));+#3860 = CARTESIAN_POINT('',(0.499861521585,-5.00001E-02));+#3861 = CARTESIAN_POINT('',(0.249890643446,-5.00001E-02));+#3862 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3864 = ORIENTED_EDGE('',*,*,#3865,.T.);+#3865 = EDGE_CURVE('',#3830,#3866,#3868,.T.);+#3866 = VERTEX_POINT('',#3867);+#3867 = CARTESIAN_POINT('',(0.486253046036,-0.189711168965,1.75));+#3868 = SURFACE_CURVE('',#3869,(#3878,#3890),.PCURVE_S1.);+#3869 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3870,#3871,#3872,#3873,#3874,+ #3875,#3876,#3877),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.878154535039,+ 1.),.UNSPECIFIED.);+#3870 = CARTESIAN_POINT('',(0.363508028906,-0.23256950614,1.75));+#3871 = CARTESIAN_POINT('',(0.397578757392,-0.23256950614,1.75));+#3872 = CARTESIAN_POINT('',(0.42754299626,-0.227095449627,1.75));+#3873 = CARTESIAN_POINT('',(0.453296209396,-0.216074444166,1.75));+#3874 = CARTESIAN_POINT('',(0.477790126904,-0.197235226511,1.75));+#3875 = CARTESIAN_POINT('',(0.480692901889,-0.194833430457,1.75));+#3876 = CARTESIAN_POINT('',(0.48351389396,-0.192325377262,1.75));+#3877 = CARTESIAN_POINT('',(0.486253046036,-0.189711168965,1.75));+#3878 = PCURVE('',#2438,#3879);+#3879 = DEFINITIONAL_REPRESENTATION('',(#3880),#3889);+#3880 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3881,#3882,#3883,#3884,#3885,+ #3886,#3887,#3888),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.878154535039,+ 1.),.UNSPECIFIED.);+#3881 = CARTESIAN_POINT('',(3.219724468637,-0.152990398114));+#3882 = CARTESIAN_POINT('',(3.240050246159,-0.18033408674));+#3883 = CARTESIAN_POINT('',(3.253532950418,-0.207647775461));+#3884 = CARTESIAN_POINT('',(3.260051717374,-0.234891054));+#3885 = CARTESIAN_POINT('',(3.259544660895,-0.265787833937));+#3886 = CARTESIAN_POINT('',(3.259348809348,-0.269550328996));+#3887 = CARTESIAN_POINT('',(3.259018890708,-0.273310579092));+#3888 = CARTESIAN_POINT('',(3.258554952816,-0.27706847754));+#3889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3890 = PCURVE('',#3891,#3898);+#3891 = SURFACE_OF_LINEAR_EXTRUSION('',#3892,#3896);+#3892 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3893,#3894,#3895),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3893 = CARTESIAN_POINT('',(0.486253046036,-0.189711168965,1.8000001));+#3894 = CARTESIAN_POINT('',(0.441346332452,-0.23256950614,1.8000001));+#3895 = CARTESIAN_POINT('',(0.363508028906,-0.23256950614,1.8000001));+#3896 = VECTOR('',#3897,1.);+#3897 = DIRECTION('',(0.,0.,1.));+#3898 = DEFINITIONAL_REPRESENTATION('',(#3899),#3908);+#3899 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3900,#3901,#3902,#3903,#3904,+ #3905,#3906,#3907),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.878154535039,+ 1.),.UNSPECIFIED.);+#3900 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3901 = CARTESIAN_POINT('',(0.78114419936,-5.00001E-02));+#3902 = CARTESIAN_POINT('',(0.561648104665,-5.00001E-02));+#3903 = CARTESIAN_POINT('',(0.34182343169,-5.00001E-02));+#3904 = CARTESIAN_POINT('',(9.149911755289E-02,-5.00001E-02));+#3905 = CARTESIAN_POINT('',(6.099824284095E-02,-5.00001E-02));+#3906 = CARTESIAN_POINT('',(3.049824689214E-02,-5.00001E-02));+#3907 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3909 = ORIENTED_EDGE('',*,*,#3910,.T.);+#3910 = EDGE_CURVE('',#3866,#3911,#3913,.T.);+#3911 = VERTEX_POINT('',#3912);+#3912 = CARTESIAN_POINT('',(0.53115975962,-7.248101139869E-02,1.75));+#3913 = SURFACE_CURVE('',#3914,(#3923,#3935),.PCURVE_S1.);+#3914 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3915,#3916,#3917,#3918,#3919,+ #3920,#3921,#3922),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219811778276,+ 1.),.UNSPECIFIED.);+#3915 = CARTESIAN_POINT('',(0.486253046036,-0.189711168965,1.75));+#3916 = CARTESIAN_POINT('',(0.491191831275,-0.184997661649,1.75));+#3917 = CARTESIAN_POINT('',(0.495769458957,-0.180029136939,1.75));+#3918 = CARTESIAN_POINT('',(0.499985143933,-0.174805824633,1.75));+#3919 = CARTESIAN_POINT('',(0.517515465432,-0.14988642925,1.75));+#3920 = CARTESIAN_POINT('',(0.526628003185,-0.127241323834,1.75));+#3921 = CARTESIAN_POINT('',(0.53115975962,-0.101416796184,1.75));+#3922 = CARTESIAN_POINT('',(0.53115975962,-7.248101139869E-02,1.75));+#3923 = PCURVE('',#2438,#3924);+#3924 = DEFINITIONAL_REPRESENTATION('',(#3925),#3934);+#3925 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3926,#3927,#3928,#3929,#3930,+ #3931,#3932,#3933),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219811778276,+ 1.),.UNSPECIFIED.);+#3926 = CARTESIAN_POINT('',(3.258554952816,-0.27706847754));+#3927 = CARTESIAN_POINT('',(3.257718456866,-0.283844097467));+#3928 = CARTESIAN_POINT('',(3.256461837103,-0.290482005251));+#3929 = CARTESIAN_POINT('',(3.254784809552,-0.296981433676));+#3930 = CARTESIAN_POINT('',(3.245243752231,-0.325916821411));+#3931 = CARTESIAN_POINT('',(3.232506093964,-0.346739674373));+#3932 = CARTESIAN_POINT('',(3.214483985334,-0.365782957841));+#3933 = CARTESIAN_POINT('',(3.191261379758,-0.3830453514));+#3934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3935 = PCURVE('',#3936,#3943);+#3936 = SURFACE_OF_LINEAR_EXTRUSION('',#3937,#3941);+#3937 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3938,#3939,#3940),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3938 = CARTESIAN_POINT('',(0.53115975962,-7.248101139869E-02,1.8000001)+ );+#3939 = CARTESIAN_POINT('',(0.53115975962,-0.14685283179,1.8000001));+#3940 = CARTESIAN_POINT('',(0.486253046036,-0.189711168965,1.8000001));+#3941 = VECTOR('',#3942,1.);+#3942 = DIRECTION('',(0.,0.,1.));+#3943 = DEFINITIONAL_REPRESENTATION('',(#3944),#3953);+#3944 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3945,#3946,#3947,#3948,#3949,+ #3950,#3951,#3952),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219811778276,+ 1.),.UNSPECIFIED.);+#3945 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3946 = CARTESIAN_POINT('',(0.94501061372,-5.00001E-02));+#3947 = CARTESIAN_POINT('',(0.890010648885,-5.00001E-02));+#3948 = CARTESIAN_POINT('',(0.835005354648,-5.00001E-02));+#3949 = CARTESIAN_POINT('',(0.584766923026,-5.00001E-02));+#3950 = CARTESIAN_POINT('',(0.389532568141,-5.00001E-02));+#3951 = CARTESIAN_POINT('',(0.194534600824,-5.00001E-02));+#3952 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3954 = ORIENTED_EDGE('',*,*,#3955,.T.);+#3955 = EDGE_CURVE('',#3911,#3956,#3958,.T.);+#3956 = VERTEX_POINT('',#3957);+#3957 = CARTESIAN_POINT('',(0.488301422445,4.443401133572E-02,1.75));+#3958 = SURFACE_CURVE('',#3959,(#3968,#3980),.PCURVE_S1.);+#3959 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3960,#3961,#3962,#3963,#3964,+ #3965,#3966,#3967),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.812174222414,+ 1.),.UNSPECIFIED.);+#3960 = CARTESIAN_POINT('',(0.53115975962,-7.248101139869E-02,1.75));+#3961 = CARTESIAN_POINT('',(0.53115975962,-4.261363196567E-02,1.75));+#3962 = CARTESIAN_POINT('',(0.526472634778,-1.601801986954E-02,1.75));+#3963 = CARTESIAN_POINT('',(0.517047596218,7.234817934891E-03,1.75));+#3964 = CARTESIAN_POINT('',(0.49962987515,3.171918249991E-02,1.75));+#3965 = CARTESIAN_POINT('',(0.496105879015,3.61378927352E-02,1.75));+#3966 = CARTESIAN_POINT('',(0.492329593442,4.037622143388E-02,1.75));+#3967 = CARTESIAN_POINT('',(0.488301422445,4.443401133572E-02,1.75));+#3968 = PCURVE('',#2438,#3969);+#3969 = DEFINITIONAL_REPRESENTATION('',(#3970),#3979);+#3970 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3971,#3972,#3973,#3974,#3975,+ #3976,#3977,#3978),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.812174222414,+ 1.),.UNSPECIFIED.);+#3971 = CARTESIAN_POINT('',(3.191261379758,-0.3830453514));+#3972 = CARTESIAN_POINT('',(3.167291116732,-0.40086351193));+#3973 = CARTESIAN_POINT('',(3.143150406238,-0.412968131662));+#3974 = CARTESIAN_POINT('',(3.118865935952,-0.419276088605));+#3975 = CARTESIAN_POINT('',(3.088824853483,-0.419904164564));+#3976 = CARTESIAN_POINT('',(3.083176256967,-0.419712054441));+#3977 = CARTESIAN_POINT('',(3.077521917033,-0.419209856471));+#3978 = CARTESIAN_POINT('',(3.071862200917,-0.418397801081));+#3979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3980 = PCURVE('',#3981,#3988);+#3981 = SURFACE_OF_LINEAR_EXTRUSION('',#3982,#3986);+#3982 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3983,#3984,#3985),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3983 = CARTESIAN_POINT('',(0.488301422445,4.443401133572E-02,1.8000001)+ );+#3984 = CARTESIAN_POINT('',(0.53115975962,1.260539328673E-03,1.8000001)+ );+#3985 = CARTESIAN_POINT('',(0.53115975962,-7.248101139869E-02,1.8000001)+ );+#3986 = VECTOR('',#3987,1.);+#3987 = DIRECTION('',(0.,0.,1.));+#3988 = DEFINITIONAL_REPRESENTATION('',(#3989),#3998);+#3989 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3990,#3991,#3992,#3993,#3994,+ #3995,#3996,#3997),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.812174222414,+ 1.),.UNSPECIFIED.);+#3990 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3991 = CARTESIAN_POINT('',(0.797486090688,-5.00001E-02));+#3992 = CARTESIAN_POINT('',(0.594489037699,-5.00001E-02));+#3993 = CARTESIAN_POINT('',(0.391244681847,-5.00001E-02));+#3994 = CARTESIAN_POINT('',(0.140997042562,-5.00001E-02));+#3995 = CARTESIAN_POINT('',(9.3994039597E-02,-5.00001E-02));+#3996 = CARTESIAN_POINT('',(4.699401870175E-02,-5.00001E-02));+#3997 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3999 = ORIENTED_EDGE('',*,*,#4000,.T.);+#4000 = EDGE_CURVE('',#3956,#4001,#4003,.T.);+#4001 = VERTEX_POINT('',#4002);+#4002 = CARTESIAN_POINT('',(0.372331804207,8.760748334276E-02,1.75));+#4003 = SURFACE_CURVE('',#4004,(#4013,#4025),.PCURVE_S1.);+#4004 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4005,#4006,#4007,#4008,#4009,+ #4010,#4011,#4012),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203824955432,+ 1.),.UNSPECIFIED.);+#4005 = CARTESIAN_POINT('',(0.488301422445,4.443401133572E-02,1.75));+#4006 = CARTESIAN_POINT('',(0.483930537141,4.883703550232E-02,1.75));+#4007 = CARTESIAN_POINT('',(0.479349216646,5.294136911363E-02,1.75));+#4008 = CARTESIAN_POINT('',(0.474557648947,5.674647315952E-02,1.75));+#4009 = CARTESIAN_POINT('',(0.450019757734,7.39455817603E-02,1.75));+#4010 = CARTESIAN_POINT('',(0.427281025097,8.306928432218E-02,1.75));+#4011 = CARTESIAN_POINT('',(0.401363115892,8.760748334276E-02,1.75));+#4012 = CARTESIAN_POINT('',(0.372331804207,8.760748334276E-02,1.75));+#4013 = PCURVE('',#2438,#4014);+#4014 = DEFINITIONAL_REPRESENTATION('',(#4015),#4024);+#4015 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4016,#4017,#4018,#4019,#4020,+ #4021,#4022,#4023),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203824955432,+ 1.),.UNSPECIFIED.);+#4016 = CARTESIAN_POINT('',(3.071862200917,-0.418397801081));+#4017 = CARTESIAN_POINT('',(3.065720959641,-0.417516656519));+#4018 = CARTESIAN_POINT('',(3.05969389387,-0.416288434197));+#4019 = CARTESIAN_POINT('',(3.053781548341,-0.414712963426));+#4020 = CARTESIAN_POINT('',(3.025339573927,-0.40528049115));+#4021 = CARTESIAN_POINT('',(3.004451904824,-0.392474352394));+#4022 = CARTESIAN_POINT('',(2.985347741626,-0.37438114327));+#4023 = CARTESIAN_POINT('',(2.968028359014,-0.351081871948));+#4024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4025 = PCURVE('',#4026,#4033);+#4026 = SURFACE_OF_LINEAR_EXTRUSION('',#4027,#4031);+#4027 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4028,#4029,#4030),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4028 = CARTESIAN_POINT('',(0.372331804207,8.760748334276E-02,1.8000001)+ );+#4029 = CARTESIAN_POINT('',(0.44544308527,8.760748334276E-02,1.8000001)+ );+#4030 = CARTESIAN_POINT('',(0.488301422445,4.443401133572E-02,1.8000001)+ );+#4031 = VECTOR('',#4032,1.);+#4032 = DIRECTION('',(0.,0.,1.));+#4033 = DEFINITIONAL_REPRESENTATION('',(#4034),#4043);+#4034 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4035,#4036,#4037,#4038,#4039,+ #4040,#4041,#4042),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203824955432,+ 1.),.UNSPECIFIED.);+#4035 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4036 = CARTESIAN_POINT('',(0.949007759141,-5.00001E-02));+#4037 = CARTESIAN_POINT('',(0.898007764486,-5.00001E-02));+#4038 = CARTESIAN_POINT('',(0.847003884714,-5.00001E-02));+#4039 = CARTESIAN_POINT('',(0.596770126016,-5.00001E-02));+#4040 = CARTESIAN_POINT('',(0.397539695064,-5.00001E-02));+#4041 = CARTESIAN_POINT('',(0.198541943619,-5.00001E-02));+#4042 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4044 = ORIENTED_EDGE('',*,*,#4045,.T.);+#4045 = EDGE_CURVE('',#4001,#4046,#4048,.T.);+#4046 = VERTEX_POINT('',#4047);+#4047 = CARTESIAN_POINT('',(0.344757506392,8.52439721015E-02,1.75));+#4048 = SURFACE_CURVE('',#4049,(#4055,#4064),.PCURVE_S1.);+#4049 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4050,#4051,#4052,#4053,#4054),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4050 = CARTESIAN_POINT('',(0.372331804207,8.760748334276E-02,1.75));+#4051 = CARTESIAN_POINT('',(0.365398842256,8.760748334276E-02,1.75));+#4052 = CARTESIAN_POINT('',(0.358492121328,8.721356529766E-02,1.75));+#4053 = CARTESIAN_POINT('',(0.35161166768,8.642572404767E-02,1.75));+#4054 = CARTESIAN_POINT('',(0.344757506392,8.52439721015E-02,1.75));+#4055 = PCURVE('',#2438,#4056);+#4056 = DEFINITIONAL_REPRESENTATION('',(#4057),#4063);+#4057 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4058,#4059,#4060,#4061,#4062),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4058 = CARTESIAN_POINT('',(2.968028359014,-0.351081871948));+#4059 = CARTESIAN_POINT('',(2.963892320589,-0.345517777452));+#4060 = CARTESIAN_POINT('',(2.960088078461,-0.339739740827));+#4061 = CARTESIAN_POINT('',(2.956615652437,-0.333747780068));+#4062 = CARTESIAN_POINT('',(2.953475047438,-0.327541922765));+#4063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4064 = PCURVE('',#4065,#4072);+#4065 = SURFACE_OF_LINEAR_EXTRUSION('',#4066,#4070);+#4066 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4067,#4068,#4069),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4067 = CARTESIAN_POINT('',(0.344757506392,8.52439721015E-02,1.8000001)+ );+#4068 = CARTESIAN_POINT('',(0.358465871591,8.760748334276E-02,1.8000001)+ );+#4069 = CARTESIAN_POINT('',(0.372331804207,8.760748334276E-02,1.8000001)+ );+#4070 = VECTOR('',#4071,1.);+#4071 = DIRECTION('',(0.,0.,1.));+#4072 = DEFINITIONAL_REPRESENTATION('',(#4073),#4079);+#4073 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4074,#4075,#4076,#4077,#4078),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4074 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4075 = CARTESIAN_POINT('',(0.750000157116,-5.00001E-02));+#4076 = CARTESIAN_POINT('',(0.499999586513,-5.00001E-02));+#4077 = CARTESIAN_POINT('',(0.249999222668,-5.00001E-02));+#4078 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4080 = ORIENTED_EDGE('',*,*,#4081,.T.);+#4081 = EDGE_CURVE('',#4046,#4082,#4084,.T.);+#4082 = VERTEX_POINT('',#4083);+#4083 = CARTESIAN_POINT('',(0.317498343409,7.783830354555E-02,1.75));+#4084 = SURFACE_CURVE('',#4085,(#4091,#4100),.PCURVE_S1.);+#4085 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4086,#4087,#4088,#4089,#4090),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4086 = CARTESIAN_POINT('',(0.344757506392,8.52439721015E-02,1.75));+#4087 = CARTESIAN_POINT('',(0.337903233785,8.406220096238E-02,1.75));+#4088 = CARTESIAN_POINT('',(0.331075261194,8.243398365285E-02,1.75));+#4089 = CARTESIAN_POINT('',(0.324273620837,8.035933700694E-02,1.75));+#4090 = CARTESIAN_POINT('',(0.317498343409,7.783830354555E-02,1.75));+#4091 = PCURVE('',#2438,#4092);+#4092 = DEFINITIONAL_REPRESENTATION('',(#4093),#4099);+#4093 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4094,#4095,#4096,#4097,#4098),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4094 = CARTESIAN_POINT('',(2.953475047438,-0.327541922765));+#4095 = CARTESIAN_POINT('',(2.950334391433,-0.321335964672));+#4096 = CARTESIAN_POINT('',(2.947567723713,-0.314884774779));+#4097 = CARTESIAN_POINT('',(2.945175049989,-0.308188388985));+#4098 = CARTESIAN_POINT('',(2.943156354449,-0.301246857292));+#4099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4100 = PCURVE('',#4101,#4108);+#4101 = SURFACE_OF_LINEAR_EXTRUSION('',#4102,#4106);+#4102 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4103,#4104,#4105),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4103 = CARTESIAN_POINT('',(0.317498343409,7.783830354555E-02,1.8000001)+ );+#4104 = CARTESIAN_POINT('',(0.331049141193,8.288046086024E-02,1.8000001)+ );+#4105 = CARTESIAN_POINT('',(0.344757506392,8.52439721015E-02,1.8000001)+ );+#4106 = VECTOR('',#4107,1.);+#4107 = DIRECTION('',(0.,0.,1.));+#4108 = DEFINITIONAL_REPRESENTATION('',(#4109),#4115);+#4109 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4110,#4111,#4112,#4113,#4114),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4110 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4111 = CARTESIAN_POINT('',(0.749996717069,-5.00001E-02));+#4112 = CARTESIAN_POINT('',(0.499994823431,-5.00001E-02));+#4113 = CARTESIAN_POINT('',(0.249995518192,-5.00001E-02));+#4114 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4116 = ORIENTED_EDGE('',*,*,#4117,.T.);+#4117 = EDGE_CURVE('',#4082,#4118,#4120,.T.);+#4118 = VERTEX_POINT('',#4119);+#4119 = CARTESIAN_POINT('',(0.317498343409,0.193492786951,1.75));+#4120 = SURFACE_CURVE('',#4121,(#4125,#4132),.PCURVE_S1.);+#4121 = LINE('',#4122,#4123);+#4122 = CARTESIAN_POINT('',(0.317498343409,1.226832033858,1.75));+#4123 = VECTOR('',#4124,1.);+#4124 = DIRECTION('',(0.,1.,0.));+#4125 = PCURVE('',#2438,#4126);+#4126 = DEFINITIONAL_REPRESENTATION('',(#4127),#4131);+#4127 = LINE('',#4128,#4129);+#4128 = CARTESIAN_POINT('',(2.021023832165,-0.986708893909));+#4129 = VECTOR('',#4130,1.);+#4130 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4132 = PCURVE('',#4133,#4138);+#4133 = PLANE('',#4134);+#4134 = AXIS2_PLACEMENT_3D('',#4135,#4136,#4137);+#4135 = CARTESIAN_POINT('',(0.317498343409,0.193492786951,1.8000001));+#4136 = DIRECTION('',(-1.,0.,0.));+#4137 = DIRECTION('',(0.,-1.,0.));+#4138 = DEFINITIONAL_REPRESENTATION('',(#4139),#4142);+#4139 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4140,#4141),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.148993730313,-1.033339246907),.PIECEWISE_BEZIER_KNOTS.);+#4140 = CARTESIAN_POINT('',(0.115654483406,-5.00001E-02));+#4141 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4143 = ORIENTED_EDGE('',*,*,#4144,.T.);+#4144 = EDGE_CURVE('',#4118,#4145,#4147,.T.);+#4145 = VERTEX_POINT('',#4146);+#4146 = CARTESIAN_POINT('',(0.49775546741,0.193492786951,1.75));+#4147 = SURFACE_CURVE('',#4148,(#4152,#4159),.PCURVE_S1.);+#4148 = LINE('',#4149,#4150);+#4149 = CARTESIAN_POINT('',(-0.591165086486,0.193492786951,1.75));+#4150 = VECTOR('',#4151,1.);+#4151 = DIRECTION('',(1.,-0.,0.));+#4152 = PCURVE('',#2438,#4153);+#4153 = DEFINITIONAL_REPRESENTATION('',(#4154),#4158);+#4154 = LINE('',#4155,#4156);+#4155 = CARTESIAN_POINT('',(2.308250326237,0.359010307533));+#4156 = VECTOR('',#4157,1.);+#4157 = DIRECTION('',(0.596575959062,-0.802556617983));+#4158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4159 = PCURVE('',#4160,#4165);+#4160 = PLANE('',#4161);+#4161 = AXIS2_PLACEMENT_3D('',#4162,#4163,#4164);+#4162 = CARTESIAN_POINT('',(0.49775546741,0.193492786951,1.8000001));+#4163 = DIRECTION('',(0.,1.,0.));+#4164 = DIRECTION('',(-1.,0.,0.));+#4165 = DEFINITIONAL_REPRESENTATION('',(#4166),#4169);+#4166 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4167,#4168),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.908663429896,1.088920553896),.PIECEWISE_BEZIER_KNOTS.);+#4167 = CARTESIAN_POINT('',(0.180257124,-5.00001E-02));+#4168 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4170 = ORIENTED_EDGE('',*,*,#4171,.T.);+#4171 = EDGE_CURVE('',#4145,#3414,#4172,.T.);+#4172 = SURFACE_CURVE('',#4173,(#4177,#4184),.PCURVE_S1.);+#4173 = LINE('',#4174,#4175);+#4174 = CARTESIAN_POINT('',(0.49775546741,1.253618494592,1.75));+#4175 = VECTOR('',#4176,1.);+#4176 = DIRECTION('',(0.,1.,0.));+#4177 = PCURVE('',#2438,#4178);+#4178 = DEFINITIONAL_REPRESENTATION('',(#4179),#4183);+#4179 = LINE('',#4180,#4181);+#4180 = CARTESIAN_POINT('',(2.107063247458,-1.147355600217));+#4181 = VECTOR('',#4182,1.);+#4182 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4184 = PCURVE('',#4185,#4190);+#4185 = PLANE('',#4186);+#4186 = AXIS2_PLACEMENT_3D('',#4187,#4188,#4189);+#4187 = CARTESIAN_POINT('',(0.49775546741,0.24706570842,1.8000001));+#4188 = DIRECTION('',(-1.,0.,0.));+#4189 = DIRECTION('',(0.,-1.,0.));+#4190 = DEFINITIONAL_REPRESENTATION('',(#4191),#4194);+#4191 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4192,#4193),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.060125707641,-1.006552786173),.PIECEWISE_BEZIER_KNOTS.);+#4192 = CARTESIAN_POINT('',(5.35729214686E-02,-5.00001E-02));+#4193 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4195 = FACE_BOUND('',#4196,.F.);+#4196 = EDGE_LOOP('',(#4197,#4226,#4253,#4289,#4325,#4361,#4406,#4442,+ #4478,#4514,#4550,#4577,#4613,#4649,#4694,#4739,#4784,#4829,#4865,+ #4901,#4928,#4955));+#4197 = ORIENTED_EDGE('',*,*,#4198,.T.);+#4198 = EDGE_CURVE('',#4199,#4201,#4203,.T.);+#4199 = VERTEX_POINT('',#4200);+#4200 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.75));+#4201 = VERTEX_POINT('',#4202);+#4202 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.75));+#4203 = SURFACE_CURVE('',#4204,(#4208,#4215),.PCURVE_S1.);+#4204 = LINE('',#4205,#4206);+#4205 = CARTESIAN_POINT('',(-0.904566677077,0.24706570842,1.75));+#4206 = VECTOR('',#4207,1.);+#4207 = DIRECTION('',(-1.,-0.,-0.));+#4208 = PCURVE('',#2438,#4209);+#4209 = DEFINITIONAL_REPRESENTATION('',(#4210),#4214);+#4210 = LINE('',#4211,#4212);+#4211 = CARTESIAN_POINT('',(2.078287169089,0.578572511144));+#4212 = VECTOR('',#4213,1.);+#4213 = DIRECTION('',(-0.596575959062,0.802556617983));+#4214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4215 = PCURVE('',#4216,#4221);+#4216 = PLANE('',#4217);+#4217 = AXIS2_PLACEMENT_3D('',#4218,#4219,#4220);+#4218 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.8000001));+#4219 = DIRECTION('',(0.,-1.,0.));+#4220 = DIRECTION('',(1.,0.,0.));+#4221 = DEFINITIONAL_REPRESENTATION('',(#4222),#4225);+#4222 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4223,#4224),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.013760896424,-0.775518963305),.PIECEWISE_BEZIER_KNOTS.);+#4223 = CARTESIAN_POINT('',(0.238241933119,-5.00001E-02));+#4224 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4226 = ORIENTED_EDGE('',*,*,#4227,.T.);+#4227 = EDGE_CURVE('',#4201,#4228,#4230,.T.);+#4228 = VERTEX_POINT('',#4229);+#4229 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,1.75));+#4230 = SURFACE_CURVE('',#4231,(#4235,#4242),.PCURVE_S1.);+#4231 = LINE('',#4232,#4233);+#4232 = CARTESIAN_POINT('',(-0.129047713773,1.135442932529,1.75));+#4233 = VECTOR('',#4234,1.);+#4234 = DIRECTION('',(0.,-1.,0.));+#4235 = PCURVE('',#2438,#4236);+#4236 = DEFINITIONAL_REPRESENTATION('',(#4237),#4241);+#4237 = LINE('',#4238,#4239);+#4238 = CARTESIAN_POINT('',(1.827970117919,-0.57380985971));+#4239 = VECTOR('',#4240,1.);+#4240 = DIRECTION('',(0.802556617983,0.596575959062));+#4241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4242 = PCURVE('',#4243,#4248);+#4243 = PLANE('',#4244);+#4244 = AXIS2_PLACEMENT_3D('',#4245,#4246,#4247);+#4245 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,1.8000001+ ));+#4246 = DIRECTION('',(1.,0.,0.));+#4247 = DIRECTION('',(0.,1.,0.));+#4248 = DEFINITIONAL_REPRESENTATION('',(#4249),#4252);+#4249 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4250,#4251),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.888377224109,1.124728348236),.PIECEWISE_BEZIER_KNOTS.);+#4250 = CARTESIAN_POINT('',(0.236351124126,-5.00001E-02));+#4251 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4253 = ORIENTED_EDGE('',*,*,#4254,.T.);+#4254 = EDGE_CURVE('',#4228,#4255,#4257,.T.);+#4255 = VERTEX_POINT('',#4256);+#4256 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747906E-02,1.75)+ );+#4257 = SURFACE_CURVE('',#4258,(#4264,#4273),.PCURVE_S1.);+#4258 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4259,#4260,#4261,#4262,#4263),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4259 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,1.75));+#4260 = CARTESIAN_POINT('',(-0.11801813469,1.654450466588E-02,1.75));+#4261 = CARTESIAN_POINT('',(-0.106620624275,2.140293375841E-02,1.75));+#4262 = CARTESIAN_POINT('',(-9.485542502605E-02,2.52896085925E-02,1.75)+ );+#4263 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747905E-02,1.75)+ );+#4264 = PCURVE('',#2438,#4265);+#4265 = DEFINITIONAL_REPRESENTATION('',(#4266),#4272);+#4266 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4267,#4268,#4269,#4270,#4271),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4267 = CARTESIAN_POINT('',(2.730628297229,9.717603332306E-02));+#4268 = CARTESIAN_POINT('',(2.732529437771,8.484618129958E-02));+#4269 = CARTESIAN_POINT('',(2.735429754057,7.28006118918E-02));+#4270 = CARTESIAN_POINT('',(2.739329312472,6.103967660589E-02));+#4271 = CARTESIAN_POINT('',(2.744227869591,4.956363869858E-02));+#4272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4273 = PCURVE('',#4274,#4281);+#4274 = SURFACE_OF_LINEAR_EXTRUSION('',#4275,#4279);+#4275 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4276,#4277,#4278),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4276 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747906E-02,+ 1.8000001));+#4277 = CARTESIAN_POINT('',(-0.106988275521,2.237457308394E-02,1.8000001+ ));+#4278 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,1.8000001+ ));+#4279 = VECTOR('',#4280,1.);+#4280 = DIRECTION('',(0.,0.,1.));+#4281 = DEFINITIONAL_REPRESENTATION('',(#4282),#4288);+#4282 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4283,#4284,#4285,#4286,#4287),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4283 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4284 = CARTESIAN_POINT('',(0.750003174229,-5.00001E-02));+#4285 = CARTESIAN_POINT('',(0.4999999257,-5.00001E-02));+#4286 = CARTESIAN_POINT('',(0.24999671432,-5.00001E-02));+#4287 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4289 = ORIENTED_EDGE('',*,*,#4290,.T.);+#4290 = EDGE_CURVE('',#4255,#4291,#4293,.T.);+#4291 = VERTEX_POINT('',#4292);+#4292 = CARTESIAN_POINT('',(-3.293158996158E-02,3.403456187417E-02,1.75)+ );+#4293 = SURFACE_CURVE('',#4294,(#4300,#4309),.PCURVE_S1.);+#4294 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4295,#4296,#4297,#4298,#4299),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4295 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747905E-02,1.75)+ );+#4296 = CARTESIAN_POINT('',(-7.058999768724E-02,3.111961386221E-02,1.75)+ );+#4297 = CARTESIAN_POINT('',(-5.824695004957E-02,3.306297490806E-02,1.75)+ );+#4298 = CARTESIAN_POINT('',(-4.569403338325E-02,3.403456187417E-02,1.75)+ );+#4299 = CARTESIAN_POINT('',(-3.293158996158E-02,3.403456187417E-02,1.75)+ );+#4300 = PCURVE('',#2438,#4301);+#4301 = DEFINITIONAL_REPRESENTATION('',(#4302),#4308);+#4302 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4303,#4304,#4305,#4306,#4307),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4303 = CARTESIAN_POINT('',(2.744227869591,4.956363869858E-02));+#4304 = CARTESIAN_POINT('',(2.749126573747,3.808725632182E-02));+#4305 = CARTESIAN_POINT('',(2.754930481961,2.702189927439E-02));+#4306 = CARTESIAN_POINT('',(2.76163949671,1.636784750272E-02));+#4307 = CARTESIAN_POINT('',(2.769253263635,6.125264073022E-03));+#4308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4309 = PCURVE('',#4310,#4317);+#4310 = SURFACE_OF_LINEAR_EXTRUSION('',#4311,#4315);+#4311 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4312,#4313,#4314),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4312 = CARTESIAN_POINT('',(-3.293158996158E-02,3.403456187417E-02,+ 1.8000001));+#4313 = CARTESIAN_POINT('',(-5.84575113672E-02,3.403456187417E-02,+ 1.8000001));+#4314 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747906E-02,+ 1.8000001));+#4315 = VECTOR('',#4316,1.);+#4316 = DIRECTION('',(0.,0.,1.));+#4317 = DEFINITIONAL_REPRESENTATION('',(#4318),#4324);+#4318 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4319,#4320,#4321,#4322,#4323),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4319 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4320 = CARTESIAN_POINT('',(0.749995781677,-5.00001E-02));+#4321 = CARTESIAN_POINT('',(0.499990432077,-5.00001E-02));+#4322 = CARTESIAN_POINT('',(0.249989867532,-5.00001E-02));+#4323 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4325 = ORIENTED_EDGE('',*,*,#4326,.T.);+#4326 = EDGE_CURVE('',#4291,#4327,#4329,.T.);+#4327 = VERTEX_POINT('',#4328);+#4328 = CARTESIAN_POINT('',(4.916103381824E-02,5.987561811196E-03,1.75)+ );+#4329 = SURFACE_CURVE('',#4330,(#4336,#4345),.PCURVE_S1.);+#4330 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4331,#4332,#4333,#4334,#4335),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4331 = CARTESIAN_POINT('',(-3.293158996158E-02,3.403456187417E-02,1.75)+ );+#4332 = CARTESIAN_POINT('',(-6.658367742001E-03,3.403456187417E-02,1.75)+ );+#4333 = CARTESIAN_POINT('',(1.580857593505E-02,2.937448774631E-02,1.75)+ );+#4334 = CARTESIAN_POINT('',(3.441862908131E-02,2.002043904742E-02,1.75)+ );+#4335 = CARTESIAN_POINT('',(4.916103381824E-02,5.987561811196E-03,1.75)+ );+#4336 = PCURVE('',#2438,#4337);+#4337 = DEFINITIONAL_REPRESENTATION('',(#4338),#4344);+#4338 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4339,#4340,#4341,#4342,#4343),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4339 = CARTESIAN_POINT('',(2.769253263635,6.125264073022E-03));+#4340 = CARTESIAN_POINT('',(2.784927236378,-1.496048429505E-02));+#4341 = CARTESIAN_POINT('',(2.802070448181,-3.02113904368E-02));+#4342 = CARTESIAN_POINT('',(2.820679912173,-3.956661117669E-02));+#4343 = CARTESIAN_POINT('',(2.840737054913,-4.302654846771E-02));+#4344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4345 = PCURVE('',#4346,#4353);+#4346 = SURFACE_OF_LINEAR_EXTRUSION('',#4347,#4351);+#4347 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4348,#4349,#4350),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4348 = CARTESIAN_POINT('',(4.916103381824E-02,5.987561811196E-03,+ 1.8000001));+#4349 = CARTESIAN_POINT('',(1.969592701051E-02,3.403456187417E-02,+ 1.8000001));+#4350 = CARTESIAN_POINT('',(-3.293158996158E-02,3.403456187417E-02,+ 1.8000001));+#4351 = VECTOR('',#4352,1.);+#4352 = DIRECTION('',(0.,0.,1.));+#4353 = DEFINITIONAL_REPRESENTATION('',(#4354),#4360);+#4354 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4355,#4356,#4357,#4358,#4359),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4355 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4356 = CARTESIAN_POINT('',(0.750385124254,-5.00001E-02));+#4357 = CARTESIAN_POINT('',(0.500369225963,-5.00001E-02));+#4358 = CARTESIAN_POINT('',(0.250167169478,-5.00001E-02));+#4359 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4361 = ORIENTED_EDGE('',*,*,#4362,.T.);+#4362 = EDGE_CURVE('',#4327,#4363,#4365,.T.);+#4363 = VERTEX_POINT('',#4364);+#4364 = CARTESIAN_POINT('',(7.862614062597E-02,-7.248101139869E-02,1.75)+ );+#4365 = SURFACE_CURVE('',#4366,(#4375,#4387),.PCURVE_S1.);+#4366 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4367,#4368,#4369,#4370,#4371,+ #4372,#4373,#4374),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174915340045,+ 1.),.UNSPECIFIED.);+#4367 = CARTESIAN_POINT('',(4.916103381824E-02,5.987561811196E-03,1.75)+ );+#4368 = CARTESIAN_POINT('',(5.173908650684E-02,3.533586524723E-03,1.75)+ );+#4369 = CARTESIAN_POINT('',(5.416690500622E-02,9.652835735698E-04,1.75)+ );+#4370 = CARTESIAN_POINT('',(5.644438002611E-02,-1.717307620344E-03,1.75)+ );+#4371 = CARTESIAN_POINT('',(6.860496170125E-02,-1.770676795288E-02,1.75)+ );+#4372 = CARTESIAN_POINT('',(7.529191726315E-02,-3.344069968899E-02,1.75)+ );+#4373 = CARTESIAN_POINT('',(7.862614062597E-02,-5.170767254346E-02,1.75)+ );+#4374 = CARTESIAN_POINT('',(7.862614062597E-02,-7.248101139869E-02,1.75)+ );+#4375 = PCURVE('',#2438,#4376);+#4376 = DEFINITIONAL_REPRESENTATION('',(#4377),#4386);+#4377 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4378,#4379,#4380,#4381,#4382,+ #4383,#4384,#4385),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174915340045,+ 1.),.UNSPECIFIED.);+#4378 = CARTESIAN_POINT('',(2.840737054913,-4.302654846771E-02));+#4379 = CARTESIAN_POINT('',(2.844244513275,-4.363159905441E-02));+#4380 = CARTESIAN_POINT('',(2.847754099955,-4.40478730621E-02));+#4381 = CARTESIAN_POINT('',(2.851265718115,-4.427530629733E-02));+#4382 = CARTESIAN_POINT('',(2.871352875999,-4.449593396646E-02));+#4383 = CARTESIAN_POINT('',(2.887969523968,-4.047610899154E-02));+#4384 = CARTESIAN_POINT('',(2.904618921423,-3.225437516738E-02));+#4385 = CARTESIAN_POINT('',(2.921290701999,-1.98615006169E-02));+#4386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4387 = PCURVE('',#4388,#4395);+#4388 = SURFACE_OF_LINEAR_EXTRUSION('',#4389,#4393);+#4389 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4390,#4391,#4392),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4390 = CARTESIAN_POINT('',(7.862614062597E-02,-7.248101139869E-02,+ 1.8000001));+#4391 = CARTESIAN_POINT('',(7.862614062597E-02,-2.205943825177E-02,+ 1.8000001));+#4392 = CARTESIAN_POINT('',(4.916103381824E-02,5.987561811196E-03,+ 1.8000001));+#4393 = VECTOR('',#4394,1.);+#4394 = DIRECTION('',(0.,0.,1.));+#4395 = DEFINITIONAL_REPRESENTATION('',(#4396),#4405);+#4396 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4397,#4398,#4399,#4400,#4401,+ #4402,#4403,#4404),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174915340045,+ 1.),.UNSPECIFIED.);+#4397 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4398 = CARTESIAN_POINT('',(0.956252446234,-5.00001E-02));+#4399 = CARTESIAN_POINT('',(0.912502452164,-5.00001E-02));+#4400 = CARTESIAN_POINT('',(0.868751231681,-5.00001E-02));+#4401 = CARTESIAN_POINT('',(0.618623188767,-5.00001E-02));+#4402 = CARTESIAN_POINT('',(0.412245981851,-5.00001E-02));+#4403 = CARTESIAN_POINT('',(0.20599653639,-5.00001E-02));+#4404 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4406 = ORIENTED_EDGE('',*,*,#4407,.T.);+#4407 = EDGE_CURVE('',#4363,#4408,#4410,.T.);+#4408 = VERTEX_POINT('',#4409);+#4409 = CARTESIAN_POINT('',(5.010643831475E-02,-0.151264719441,1.75));+#4410 = SURFACE_CURVE('',#4411,(#4417,#4426),.PCURVE_S1.);+#4411 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4412,#4413,#4414,#4415,#4416),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4412 = CARTESIAN_POINT('',(7.862614062597E-02,-7.248101139869E-02,1.75)+ );+#4413 = CARTESIAN_POINT('',(7.862614062597E-02,-9.796959948065E-02,1.75)+ );+#4414 = CARTESIAN_POINT('',(7.388678410628E-02,-0.119622937727,1.75));+#4415 = CARTESIAN_POINT('',(6.437437866056E-02,-0.137390921093,1.75));+#4416 = CARTESIAN_POINT('',(5.010643831475E-02,-0.151264719441,1.75));+#4417 = PCURVE('',#2438,#4418);+#4418 = DEFINITIONAL_REPRESENTATION('',(#4419),#4425);+#4419 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4420,#4421,#4422,#4423,#4424),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4420 = CARTESIAN_POINT('',(2.921290701999,-1.98615006169E-02));+#4421 = CARTESIAN_POINT('',(2.941746737047,-4.655621736757E-03));+#4422 = CARTESIAN_POINT('',(2.956297380797,1.206584123429E-02));+#4423 = CARTESIAN_POINT('',(2.964882321034,3.030003689515E-02));+#4424 = CARTESIAN_POINT('',(2.967504919519,5.002764139956E-02));+#4425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4426 = PCURVE('',#4427,#4434);+#4427 = SURFACE_OF_LINEAR_EXTRUSION('',#4428,#4432);+#4428 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4429,#4430,#4431),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4429 = CARTESIAN_POINT('',(5.010643831475E-02,-0.151264719441,1.8000001+ ));+#4430 = CARTESIAN_POINT('',(7.862614062597E-02,-0.12353285421,1.8000001)+ );+#4431 = CARTESIAN_POINT('',(7.862614062597E-02,-7.248101139869E-02,+ 1.8000001));+#4432 = VECTOR('',#4433,1.);+#4433 = DIRECTION('',(0.,0.,1.));+#4434 = DEFINITIONAL_REPRESENTATION('',(#4435),#4441);+#4435 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4436,#4437,#4438,#4439,#4440),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4436 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4437 = CARTESIAN_POINT('',(0.750365641293,-5.00001E-02));+#4438 = CARTESIAN_POINT('',(0.500339278044,-5.00001E-02));+#4439 = CARTESIAN_POINT('',(0.250141817578,-5.00001E-02));+#4440 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4442 = ORIENTED_EDGE('',*,*,#4443,.T.);+#4443 = EDGE_CURVE('',#4408,#4444,#4446,.T.);+#4444 = VERTEX_POINT('',#4445);+#4445 = CARTESIAN_POINT('',(-3.104078096857E-02,-0.178996584672,1.75));+#4446 = SURFACE_CURVE('',#4447,(#4453,#4462),.PCURVE_S1.);+#4447 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4448,#4449,#4450,#4451,#4452),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4448 = CARTESIAN_POINT('',(5.010643831475E-02,-0.151264719441,1.75));+#4449 = CARTESIAN_POINT('',(3.583615250265E-02,-0.165140798462,1.75));+#4450 = CARTESIAN_POINT('',(1.754042216426E-02,-0.174389618774,1.75));+#4451 = CARTESIAN_POINT('',(-4.76968251004E-03,-0.178996584672,1.75));+#4452 = CARTESIAN_POINT('',(-3.104078096857E-02,-0.178996584672,1.75));+#4453 = PCURVE('',#2438,#4454);+#4454 = DEFINITIONAL_REPRESENTATION('',(#4455),#4461);+#4455 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4456,#4457,#4458,#4459,#4460),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4456 = CARTESIAN_POINT('',(2.967504919519,5.002764139956E-02));+#4457 = CARTESIAN_POINT('',(2.970127949125,6.975848886897E-02));+#4458 = CARTESIAN_POINT('',(2.966635858201,8.99594721803E-02));+#4459 = CARTESIAN_POINT('',(2.957023537078,0.110612999433));+#4460 = CARTESIAN_POINT('',(2.94135083132,0.131697043363));+#4461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4462 = PCURVE('',#4463,#4470);+#4463 = SURFACE_OF_LINEAR_EXTRUSION('',#4464,#4468);+#4464 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4465,#4466,#4467),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4465 = CARTESIAN_POINT('',(-3.104078096857E-02,-0.178996584672,+ 1.8000001));+#4466 = CARTESIAN_POINT('',(2.158673600352E-02,-0.178996584672,1.8000001+ ));+#4467 = CARTESIAN_POINT('',(5.010643831475E-02,-0.151264719441,1.8000001+ ));+#4468 = VECTOR('',#4469,1.);+#4469 = DIRECTION('',(0.,0.,1.));+#4470 = DEFINITIONAL_REPRESENTATION('',(#4471),#4477);+#4471 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4472,#4473,#4474,#4475,#4476),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4472 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4473 = CARTESIAN_POINT('',(0.749817062318,-5.00001E-02));+#4474 = CARTESIAN_POINT('',(0.499606720745,-5.00001E-02));+#4475 = CARTESIAN_POINT('',(0.249594698458,-5.00001E-02));+#4476 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4478 = ORIENTED_EDGE('',*,*,#4479,.T.);+#4479 = EDGE_CURVE('',#4444,#4480,#4482,.T.);+#4480 = VERTEX_POINT('',#4481);+#4481 = CARTESIAN_POINT('',(-9.091639908053E-02,-0.171275781283,1.75));+#4482 = SURFACE_CURVE('',#4483,(#4489,#4498),.PCURVE_S1.);+#4483 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4484,#4485,#4486,#4487,#4488),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4484 = CARTESIAN_POINT('',(-3.104078096857E-02,-0.178996584672,1.75));+#4485 = CARTESIAN_POINT('',(-4.632426810241E-02,-0.178996584672,1.75));+#4486 = CARTESIAN_POINT('',(-6.139846283701E-02,-0.177709877098,1.75));+#4487 = CARTESIAN_POINT('',(-7.62626956081E-02,-0.175136165532,1.75));+#4488 = CARTESIAN_POINT('',(-9.091639908053E-02,-0.171275781283,1.75));+#4489 = PCURVE('',#2438,#4490);+#4490 = DEFINITIONAL_REPRESENTATION('',(#4491),#4497);+#4491 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4492,#4493,#4494,#4495,#4496),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4492 = CARTESIAN_POINT('',(2.94135083132,0.131697043363));+#4493 = CARTESIAN_POINT('',(2.932233070325,0.143962907108));+#4494 = CARTESIAN_POINT('',(2.922207512466,0.155293183049));+#4495 = CARTESIAN_POINT('',(2.911274319294,0.165687156984));+#4496 = CARTESIAN_POINT('',(2.899434095165,0.175144571249));+#4497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4498 = PCURVE('',#4499,#4506);+#4499 = SURFACE_OF_LINEAR_EXTRUSION('',#4500,#4504);+#4500 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4501,#4502,#4503),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4501 = CARTESIAN_POINT('',(-9.091639908053E-02,-0.171275781283,+ 1.8000001));+#4502 = CARTESIAN_POINT('',(-6.160885968889E-02,-0.178996584672,+ 1.8000001));+#4503 = CARTESIAN_POINT('',(-3.104078096857E-02,-0.178996584672,+ 1.8000001));+#4504 = VECTOR('',#4505,1.);+#4505 = DIRECTION('',(0.,0.,1.));+#4506 = DEFINITIONAL_REPRESENTATION('',(#4507),#4513);+#4507 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4508,#4509,#4510,#4511,#4512),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4508 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4509 = CARTESIAN_POINT('',(0.750009032729,-5.00001E-02));+#4510 = CARTESIAN_POINT('',(0.500005269321,-5.00001E-02));+#4511 = CARTESIAN_POINT('',(0.249998870199,-5.00001E-02));+#4512 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4514 = ORIENTED_EDGE('',*,*,#4515,.T.);+#4515 = EDGE_CURVE('',#4480,#4516,#4518,.T.);+#4516 = VERTEX_POINT('',#4517);+#4517 = CARTESIAN_POINT('',(-0.149216343032,-0.147798236287,1.75));+#4518 = SURFACE_CURVE('',#4519,(#4525,#4534),.PCURVE_S1.);+#4519 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4520,#4521,#4522,#4523,#4524),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4520 = CARTESIAN_POINT('',(-9.091639908053E-02,-0.171275781283,1.75));+#4521 = CARTESIAN_POINT('',(-0.105572340059,-0.167414807585,1.75));+#4522 = CARTESIAN_POINT('',(-0.120174714732,-0.162214384735,1.75));+#4523 = CARTESIAN_POINT('',(-0.134722910136,-0.155675101991,1.75));+#4524 = CARTESIAN_POINT('',(-0.149216343032,-0.147798236287,1.75));+#4525 = PCURVE('',#2438,#4526);+#4526 = DEFINITIONAL_REPRESENTATION('',(#4527),#4533);+#4527 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4528,#4529,#4530,#4531,#4532),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4528 = CARTESIAN_POINT('',(2.899434095165,0.175144571249));+#4529 = CARTESIAN_POINT('',(2.887592063126,0.184603429586));+#4530 = CARTESIAN_POINT('',(2.874707003677,0.193220214769));+#4531 = CARTESIAN_POINT('',(2.860779755408,0.200994786396));+#4532 = CARTESIAN_POINT('',(2.845811691078,0.207927438172));+#4533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4534 = PCURVE('',#4535,#4542);+#4535 = SURFACE_OF_LINEAR_EXTRUSION('',#4536,#4540);+#4536 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4537,#4538,#4539),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4537 = CARTESIAN_POINT('',(-0.149216343032,-0.147798236287,1.8000001));+#4538 = CARTESIAN_POINT('',(-0.120223938472,-0.163554977895,1.8000001));+#4539 = CARTESIAN_POINT('',(-9.091639908053E-02,-0.171275781283,+ 1.8000001));+#4540 = VECTOR('',#4541,1.);+#4541 = DIRECTION('',(0.,0.,1.));+#4542 = DEFINITIONAL_REPRESENTATION('',(#4543),#4549);+#4543 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4544,#4545,#4546,#4547,#4548),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4544 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4545 = CARTESIAN_POINT('',(0.749962956926,-5.00001E-02));+#4546 = CARTESIAN_POINT('',(0.499943456523,-5.00001E-02));+#4547 = CARTESIAN_POINT('',(0.249952239497,-5.00001E-02));+#4548 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4550 = ORIENTED_EDGE('',*,*,#4551,.T.);+#4551 = EDGE_CURVE('',#4516,#4552,#4554,.T.);+#4552 = VERTEX_POINT('',#4553);+#4553 = CARTESIAN_POINT('',(-0.149216343032,-0.212400876881,1.75));+#4554 = SURFACE_CURVE('',#4555,(#4559,#4566),.PCURVE_S1.);+#4555 = LINE('',#4556,#4557);+#4556 = CARTESIAN_POINT('',(-0.149216343032,1.023885201942,1.75));+#4557 = VECTOR('',#4558,1.);+#4558 = DIRECTION('',(0.,-1.,0.));+#4559 = PCURVE('',#2438,#4560);+#4560 = DEFINITIONAL_REPRESENTATION('',(#4561),#4565);+#4561 = LINE('',#4562,#4563);+#4562 = CARTESIAN_POINT('',(1.905469393546,-0.491070732707));+#4563 = VECTOR('',#4564,1.);+#4564 = DIRECTION('',(0.802556617983,0.596575959062));+#4565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4566 = PCURVE('',#4567,#4572);+#4567 = PLANE('',#4568);+#4568 = AXIS2_PLACEMENT_3D('',#4569,#4570,#4571);+#4569 = CARTESIAN_POINT('',(-0.149216343032,-0.212400876881,1.8000001));+#4570 = DIRECTION('',(1.,0.,0.));+#4571 = DIRECTION('',(0.,1.,0.));+#4572 = DEFINITIONAL_REPRESENTATION('',(#4573),#4576);+#4573 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4574,#4575),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.171683438229,1.236286078823),.PIECEWISE_BEZIER_KNOTS.);+#4574 = CARTESIAN_POINT('',(6.460264059448E-02,-5.00001E-02));+#4575 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4577 = ORIENTED_EDGE('',*,*,#4578,.T.);+#4578 = EDGE_CURVE('',#4552,#4579,#4581,.T.);+#4579 = VERTEX_POINT('',#4580);+#4580 = CARTESIAN_POINT('',(-9.359504515396E-02,-0.227527348825,1.75));+#4581 = SURFACE_CURVE('',#4582,(#4588,#4597),.PCURVE_S1.);+#4582 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4583,#4584,#4585,#4586,#4587),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4583 = CARTESIAN_POINT('',(-0.149216343032,-0.212400876881,1.75));+#4584 = CARTESIAN_POINT('',(-0.136922890457,-0.217444344604,1.75));+#4585 = CARTESIAN_POINT('',(-0.12355393225,-0.221646291788,1.75));+#4586 = CARTESIAN_POINT('',(-0.10911071277,-0.225007037335,1.75));+#4587 = CARTESIAN_POINT('',(-9.359504515396E-02,-0.227527348825,1.75));+#4588 = PCURVE('',#2438,#4589);+#4589 = DEFINITIONAL_REPRESENTATION('',(#4590),#4596);+#4590 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4591,#4592,#4593,#4594,#4595),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4591 = CARTESIAN_POINT('',(2.897658967826,0.246467820442));+#4592 = CARTESIAN_POINT('',(2.909040614485,0.239610440315));+#4593 = CARTESIAN_POINT('',(2.920388514069,0.231387875101));+#4594 = CARTESIAN_POINT('',(2.931702180162,0.22180131372));+#4595 = CARTESIAN_POINT('',(2.942981147117,0.210852669237));+#4596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4597 = PCURVE('',#4598,#4605);+#4598 = SURFACE_OF_LINEAR_EXTRUSION('',#4599,#4603);+#4599 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4600,#4601,#4602),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4600 = CARTESIAN_POINT('',(-9.359504515396E-02,-0.227527348825,+ 1.8000001));+#4601 = CARTESIAN_POINT('',(-0.124635826123,-0.222485191511,1.8000001));+#4602 = CARTESIAN_POINT('',(-0.149216343032,-0.212400876881,1.8000001));+#4603 = VECTOR('',#4604,1.);+#4604 = DIRECTION('',(0.,0.,1.));+#4605 = DEFINITIONAL_REPRESENTATION('',(#4606),#4612);+#4606 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4607,#4608,#4609,#4610,#4611),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4607 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4608 = CARTESIAN_POINT('',(0.749935027398,-5.00001E-02));+#4609 = CARTESIAN_POINT('',(0.499905954591,-5.00001E-02));+#4610 = CARTESIAN_POINT('',(0.249923924785,-5.00001E-02));+#4611 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4613 = ORIENTED_EDGE('',*,*,#4614,.T.);+#4614 = EDGE_CURVE('',#4579,#4615,#4617,.T.);+#4615 = VERTEX_POINT('',#4616);+#4616 = CARTESIAN_POINT('',(-2.505321915737E-02,-0.23256950614,1.75));+#4617 = SURFACE_CURVE('',#4618,(#4624,#4633),.PCURVE_S1.);+#4618 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4619,#4620,#4621,#4622,#4623),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4619 = CARTESIAN_POINT('',(-9.359504515396E-02,-0.227527348825,1.75));+#4620 = CARTESIAN_POINT('',(-7.806855010179E-02,-0.230049419088,1.75));+#4621 = CARTESIAN_POINT('',(-6.146810924442E-02,-0.231729881734,1.75));+#4622 = CARTESIAN_POINT('',(-4.37955397013E-02,-0.23256950614,1.75));+#4623 = CARTESIAN_POINT('',(-2.505321915737E-02,-0.23256950614,1.75));+#4624 = PCURVE('',#2438,#4625);+#4625 = DEFINITIONAL_REPRESENTATION('',(#4626),#4632);+#4626 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4627,#4628,#4629,#4630,#4631),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4627 = CARTESIAN_POINT('',(2.942981147117,0.210852669237));+#4628 = CARTESIAN_POINT('',(2.954267984974,0.199896384365));+#4629 = CARTESIAN_POINT('',(2.965520075317,0.187576114308));+#4630 = CARTESIAN_POINT('',(2.976736951566,0.1738937764));+#4631 = CARTESIAN_POINT('',(2.987918169419,0.158852003011));+#4632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4633 = PCURVE('',#4634,#4641);+#4634 = SURFACE_OF_LINEAR_EXTRUSION('',#4635,#4639);+#4635 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4636,#4637,#4638),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4636 = CARTESIAN_POINT('',(-2.505321915737E-02,-0.23256950614,1.8000001+ ));+#4637 = CARTESIAN_POINT('',(-6.255426418539E-02,-0.23256950614,1.8000001+ ));+#4638 = CARTESIAN_POINT('',(-9.359504515396E-02,-0.227527348825,+ 1.8000001));+#4639 = VECTOR('',#4640,1.);+#4640 = DIRECTION('',(0.,0.,1.));+#4641 = DEFINITIONAL_REPRESENTATION('',(#4642),#4648);+#4642 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4643,#4644,#4645,#4646,#4647),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4643 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4644 = CARTESIAN_POINT('',(0.749901668584,-5.00001E-02));+#4645 = CARTESIAN_POINT('',(0.499861521585,-5.00001E-02));+#4646 = CARTESIAN_POINT('',(0.249890643446,-5.00001E-02));+#4647 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4649 = ORIENTED_EDGE('',*,*,#4650,.T.);+#4650 = EDGE_CURVE('',#4615,#4651,#4653,.T.);+#4651 = VERTEX_POINT('',#4652);+#4652 = CARTESIAN_POINT('',(9.769179797215E-02,-0.189711168965,1.75));+#4653 = SURFACE_CURVE('',#4654,(#4663,#4675),.PCURVE_S1.);+#4654 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4655,#4656,#4657,#4658,#4659,+ #4660,#4661,#4662),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.878154535039,+ 1.),.UNSPECIFIED.);+#4655 = CARTESIAN_POINT('',(-2.505321915737E-02,-0.23256950614,1.75));+#4656 = CARTESIAN_POINT('',(9.017509328447E-03,-0.23256950614,1.75));+#4657 = CARTESIAN_POINT('',(3.898174819688E-02,-0.227095449627,1.75));+#4658 = CARTESIAN_POINT('',(6.473496133241E-02,-0.216074444166,1.75));+#4659 = CARTESIAN_POINT('',(8.922887884012E-02,-0.197235226511,1.75));+#4660 = CARTESIAN_POINT('',(9.213165382539E-02,-0.194833430457,1.75));+#4661 = CARTESIAN_POINT('',(9.495264589615E-02,-0.192325377262,1.75));+#4662 = CARTESIAN_POINT('',(9.769179797215E-02,-0.189711168965,1.75));+#4663 = PCURVE('',#2438,#4664);+#4664 = DEFINITIONAL_REPRESENTATION('',(#4665),#4674);+#4665 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4666,#4667,#4668,#4669,#4670,+ #4671,#4672,#4673),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.878154535039,+ 1.),.UNSPECIFIED.);+#4666 = CARTESIAN_POINT('',(2.987918169419,0.158852003011));+#4667 = CARTESIAN_POINT('',(3.008243946941,0.131508314385));+#4668 = CARTESIAN_POINT('',(3.0217266512,0.104194625664));+#4669 = CARTESIAN_POINT('',(3.028245418156,7.695134712492E-02));+#4670 = CARTESIAN_POINT('',(3.027738361677,4.605456718811E-02));+#4671 = CARTESIAN_POINT('',(3.02754251013,4.229207212882E-02));+#4672 = CARTESIAN_POINT('',(3.027212591491,3.853182203331E-02));+#4673 = CARTESIAN_POINT('',(3.026748653598,3.477392358503E-02));+#4674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4675 = PCURVE('',#4676,#4683);+#4676 = SURFACE_OF_LINEAR_EXTRUSION('',#4677,#4681);+#4677 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4678,#4679,#4680),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4678 = CARTESIAN_POINT('',(9.769179797215E-02,-0.189711168965,1.8000001+ ));+#4679 = CARTESIAN_POINT('',(5.278508438818E-02,-0.23256950614,1.8000001)+ );+#4680 = CARTESIAN_POINT('',(-2.505321915737E-02,-0.23256950614,1.8000001+ ));+#4681 = VECTOR('',#4682,1.);+#4682 = DIRECTION('',(0.,0.,1.));+#4683 = DEFINITIONAL_REPRESENTATION('',(#4684),#4693);+#4684 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4685,#4686,#4687,#4688,#4689,+ #4690,#4691,#4692),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.878154535039,+ 1.),.UNSPECIFIED.);+#4685 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4686 = CARTESIAN_POINT('',(0.78114419936,-5.00001E-02));+#4687 = CARTESIAN_POINT('',(0.561648104665,-5.00001E-02));+#4688 = CARTESIAN_POINT('',(0.34182343169,-5.00001E-02));+#4689 = CARTESIAN_POINT('',(9.149911755289E-02,-5.00001E-02));+#4690 = CARTESIAN_POINT('',(6.099824284095E-02,-5.00001E-02));+#4691 = CARTESIAN_POINT('',(3.049824689214E-02,-5.00001E-02));+#4692 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4694 = ORIENTED_EDGE('',*,*,#4695,.T.);+#4695 = EDGE_CURVE('',#4651,#4696,#4698,.T.);+#4696 = VERTEX_POINT('',#4697);+#4697 = CARTESIAN_POINT('',(0.142598511556,-7.248101139869E-02,1.75));+#4698 = SURFACE_CURVE('',#4699,(#4708,#4720),.PCURVE_S1.);+#4699 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4700,#4701,#4702,#4703,#4704,+ #4705,#4706,#4707),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219811778276,+ 1.),.UNSPECIFIED.);+#4700 = CARTESIAN_POINT('',(9.769179797215E-02,-0.189711168965,1.75));+#4701 = CARTESIAN_POINT('',(0.102630583212,-0.184997661649,1.75));+#4702 = CARTESIAN_POINT('',(0.107208210894,-0.180029136939,1.75));+#4703 = CARTESIAN_POINT('',(0.111423895869,-0.174805824633,1.75));+#4704 = CARTESIAN_POINT('',(0.128954217368,-0.14988642925,1.75));+#4705 = CARTESIAN_POINT('',(0.138066755121,-0.127241323834,1.75));+#4706 = CARTESIAN_POINT('',(0.142598511556,-0.101416796184,1.75));+#4707 = CARTESIAN_POINT('',(0.142598511556,-7.248101139869E-02,1.75));+#4708 = PCURVE('',#2438,#4709);+#4709 = DEFINITIONAL_REPRESENTATION('',(#4710),#4719);+#4710 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4711,#4712,#4713,#4714,#4715,+ #4716,#4717,#4718),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219811778276,+ 1.),.UNSPECIFIED.);+#4711 = CARTESIAN_POINT('',(3.026748653598,3.477392358503E-02));+#4712 = CARTESIAN_POINT('',(3.025912157648,2.799830365822E-02));+#4713 = CARTESIAN_POINT('',(3.024655537885,2.136039587377E-02));+#4714 = CARTESIAN_POINT('',(3.022978510334,1.486096744914E-02));+#4715 = CARTESIAN_POINT('',(3.013437453014,-1.407442028588E-02));+#4716 = CARTESIAN_POINT('',(3.000699794746,-3.489727324788E-02));+#4717 = CARTESIAN_POINT('',(2.982677686116,-5.394055671569E-02));+#4718 = CARTESIAN_POINT('',(2.95945508054,-7.120295027498E-02));+#4719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4720 = PCURVE('',#4721,#4728);+#4721 = SURFACE_OF_LINEAR_EXTRUSION('',#4722,#4726);+#4722 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4723,#4724,#4725),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4723 = CARTESIAN_POINT('',(0.142598511556,-7.248101139869E-02,1.8000001+ ));+#4724 = CARTESIAN_POINT('',(0.142598511556,-0.14685283179,1.8000001));+#4725 = CARTESIAN_POINT('',(9.769179797215E-02,-0.189711168965,1.8000001+ ));+#4726 = VECTOR('',#4727,1.);+#4727 = DIRECTION('',(0.,0.,1.));+#4728 = DEFINITIONAL_REPRESENTATION('',(#4729),#4738);+#4729 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4730,#4731,#4732,#4733,#4734,+ #4735,#4736,#4737),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219811778276,+ 1.),.UNSPECIFIED.);+#4730 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4731 = CARTESIAN_POINT('',(0.94501061372,-5.00001E-02));+#4732 = CARTESIAN_POINT('',(0.890010648885,-5.00001E-02));+#4733 = CARTESIAN_POINT('',(0.835005354648,-5.00001E-02));+#4734 = CARTESIAN_POINT('',(0.584766923026,-5.00001E-02));+#4735 = CARTESIAN_POINT('',(0.389532568141,-5.00001E-02));+#4736 = CARTESIAN_POINT('',(0.194534600824,-5.00001E-02));+#4737 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4739 = ORIENTED_EDGE('',*,*,#4740,.T.);+#4740 = EDGE_CURVE('',#4696,#4741,#4743,.T.);+#4741 = VERTEX_POINT('',#4742);+#4742 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,1.75)+ );+#4743 = SURFACE_CURVE('',#4744,(#4753,#4765),.PCURVE_S1.);+#4744 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4745,#4746,#4747,#4748,#4749,+ #4750,#4751,#4752),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.812174222414,+ 1.),.UNSPECIFIED.);+#4745 = CARTESIAN_POINT('',(0.142598511556,-7.248101139869E-02,1.75));+#4746 = CARTESIAN_POINT('',(0.142598511556,-4.261363196567E-02,1.75));+#4747 = CARTESIAN_POINT('',(0.137911386715,-1.601801986954E-02,1.75));+#4748 = CARTESIAN_POINT('',(0.128486348154,7.234817934892E-03,1.75));+#4749 = CARTESIAN_POINT('',(0.111068627087,3.171918249991E-02,1.75));+#4750 = CARTESIAN_POINT('',(0.107544630952,3.61378927352E-02,1.75));+#4751 = CARTESIAN_POINT('',(0.103768345379,4.037622143388E-02,1.75));+#4752 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,1.75)+ );+#4753 = PCURVE('',#2438,#4754);+#4754 = DEFINITIONAL_REPRESENTATION('',(#4755),#4764);+#4755 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4756,#4757,#4758,#4759,#4760,+ #4761,#4762,#4763),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.812174222414,+ 1.),.UNSPECIFIED.);+#4756 = CARTESIAN_POINT('',(2.95945508054,-7.120295027498E-02));+#4757 = CARTESIAN_POINT('',(2.935484817514,-8.902111080491E-02));+#4758 = CARTESIAN_POINT('',(2.91134410702,-0.101125730537));+#4759 = CARTESIAN_POINT('',(2.887059636734,-0.10743368748));+#4760 = CARTESIAN_POINT('',(2.857018554265,-0.108061763439));+#4761 = CARTESIAN_POINT('',(2.851369957749,-0.107869653316));+#4762 = CARTESIAN_POINT('',(2.845715617815,-0.107367455346));+#4763 = CARTESIAN_POINT('',(2.840055901699,-0.106555399956));+#4764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4765 = PCURVE('',#4766,#4773);+#4766 = SURFACE_OF_LINEAR_EXTRUSION('',#4767,#4771);+#4767 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4768,#4769,#4770),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4768 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,+ 1.8000001));+#4769 = CARTESIAN_POINT('',(0.142598511556,1.260539328673E-03,1.8000001)+ );+#4770 = CARTESIAN_POINT('',(0.142598511556,-7.248101139869E-02,1.8000001+ ));+#4771 = VECTOR('',#4772,1.);+#4772 = DIRECTION('',(0.,0.,1.));+#4773 = DEFINITIONAL_REPRESENTATION('',(#4774),#4783);+#4774 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4775,#4776,#4777,#4778,#4779,+ #4780,#4781,#4782),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.812174222414,+ 1.),.UNSPECIFIED.);+#4775 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4776 = CARTESIAN_POINT('',(0.797486090688,-5.00001E-02));+#4777 = CARTESIAN_POINT('',(0.594489037699,-5.00001E-02));+#4778 = CARTESIAN_POINT('',(0.391244681847,-5.00001E-02));+#4779 = CARTESIAN_POINT('',(0.140997042562,-5.00001E-02));+#4780 = CARTESIAN_POINT('',(9.3994039597E-02,-5.00001E-02));+#4781 = CARTESIAN_POINT('',(4.699401870176E-02,-5.00001E-02));+#4782 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4784 = ORIENTED_EDGE('',*,*,#4785,.T.);+#4785 = EDGE_CURVE('',#4741,#4786,#4788,.T.);+#4786 = VERTEX_POINT('',#4787);+#4787 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,1.75)+ );+#4788 = SURFACE_CURVE('',#4789,(#4798,#4810),.PCURVE_S1.);+#4789 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4790,#4791,#4792,#4793,#4794,+ #4795,#4796,#4797),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203824955432,+ 1.),.UNSPECIFIED.);+#4790 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,1.75)+ );+#4791 = CARTESIAN_POINT('',(9.536928907717E-02,4.883703550232E-02,1.75)+ );+#4792 = CARTESIAN_POINT('',(9.078796858216E-02,5.294136911363E-02,1.75)+ );+#4793 = CARTESIAN_POINT('',(8.59964008839E-02,5.674647315952E-02,1.75));+#4794 = CARTESIAN_POINT('',(6.145850967106E-02,7.39455817603E-02,1.75));+#4795 = CARTESIAN_POINT('',(3.87197770339E-02,8.306928432218E-02,1.75));+#4796 = CARTESIAN_POINT('',(1.280186782872E-02,8.760748334276E-02,1.75)+ );+#4797 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,1.75)+ );+#4798 = PCURVE('',#2438,#4799);+#4799 = DEFINITIONAL_REPRESENTATION('',(#4800),#4809);+#4800 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4801,#4802,#4803,#4804,#4805,+ #4806,#4807,#4808),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203824955432,+ 1.),.UNSPECIFIED.);+#4801 = CARTESIAN_POINT('',(2.840055901699,-0.106555399956));+#4802 = CARTESIAN_POINT('',(2.833914660423,-0.105674255394));+#4803 = CARTESIAN_POINT('',(2.827887594653,-0.104446033072));+#4804 = CARTESIAN_POINT('',(2.821975249123,-0.102870562301));+#4805 = CARTESIAN_POINT('',(2.793533274709,-9.343809002498E-02));+#4806 = CARTESIAN_POINT('',(2.772645605606,-8.063195126853E-02));+#4807 = CARTESIAN_POINT('',(2.753541442408,-6.253874214474E-02));+#4808 = CARTESIAN_POINT('',(2.736222059796,-3.92394708229E-02));+#4809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4810 = PCURVE('',#4811,#4818);+#4811 = SURFACE_OF_LINEAR_EXTRUSION('',#4812,#4816);+#4812 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4813,#4814,#4815),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4813 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.8000001));+#4814 = CARTESIAN_POINT('',(5.688183720636E-02,8.760748334276E-02,+ 1.8000001));+#4815 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,+ 1.8000001));+#4816 = VECTOR('',#4817,1.);+#4817 = DIRECTION('',(0.,0.,1.));+#4818 = DEFINITIONAL_REPRESENTATION('',(#4819),#4828);+#4819 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4820,#4821,#4822,#4823,#4824,+ #4825,#4826,#4827),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203824955432,+ 1.),.UNSPECIFIED.);+#4820 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4821 = CARTESIAN_POINT('',(0.949007759141,-5.00001E-02));+#4822 = CARTESIAN_POINT('',(0.898007764486,-5.00001E-02));+#4823 = CARTESIAN_POINT('',(0.847003884714,-5.00001E-02));+#4824 = CARTESIAN_POINT('',(0.596770126016,-5.00001E-02));+#4825 = CARTESIAN_POINT('',(0.397539695064,-5.00001E-02));+#4826 = CARTESIAN_POINT('',(0.198541943619,-5.00001E-02));+#4827 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4829 = ORIENTED_EDGE('',*,*,#4830,.T.);+#4830 = EDGE_CURVE('',#4786,#4831,#4833,.T.);+#4831 = VERTEX_POINT('',#4832);+#4832 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,1.75)+ );+#4833 = SURFACE_CURVE('',#4834,(#4840,#4849),.PCURVE_S1.);+#4834 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4835,#4836,#4837,#4838,#4839),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4835 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,1.75)+ );+#4836 = CARTESIAN_POINT('',(-2.316240580725E-02,8.760748334276E-02,1.75)+ );+#4837 = CARTESIAN_POINT('',(-3.006912673581E-02,8.721356529766E-02,1.75)+ );+#4838 = CARTESIAN_POINT('',(-3.694958038362E-02,8.642572404767E-02,1.75)+ );+#4839 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,1.75)+ );+#4840 = PCURVE('',#2438,#4841);+#4841 = DEFINITIONAL_REPRESENTATION('',(#4842),#4848);+#4842 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4843,#4844,#4845,#4846,#4847),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4843 = CARTESIAN_POINT('',(2.736222059796,-3.92394708229E-02));+#4844 = CARTESIAN_POINT('',(2.732086021371,-3.367537632723E-02));+#4845 = CARTESIAN_POINT('',(2.728281779243,-2.789733970189E-02));+#4846 = CARTESIAN_POINT('',(2.724809353219,-2.190537894282E-02));+#4847 = CARTESIAN_POINT('',(2.72166874822,-1.569952163994E-02));+#4848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4849 = PCURVE('',#4850,#4857);+#4850 = SURFACE_OF_LINEAR_EXTRUSION('',#4851,#4855);+#4851 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4852,#4853,#4854),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4852 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.8000001));+#4853 = CARTESIAN_POINT('',(-3.009537647206E-02,8.760748334276E-02,+ 1.8000001));+#4854 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.8000001));+#4855 = VECTOR('',#4856,1.);+#4856 = DIRECTION('',(0.,0.,1.));+#4857 = DEFINITIONAL_REPRESENTATION('',(#4858),#4864);+#4858 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4859,#4860,#4861,#4862,#4863),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4859 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4860 = CARTESIAN_POINT('',(0.750000157116,-5.00001E-02));+#4861 = CARTESIAN_POINT('',(0.499999586513,-5.00001E-02));+#4862 = CARTESIAN_POINT('',(0.249999222668,-5.00001E-02));+#4863 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4865 = ORIENTED_EDGE('',*,*,#4866,.T.);+#4866 = EDGE_CURVE('',#4831,#4867,#4869,.T.);+#4867 = VERTEX_POINT('',#4868);+#4868 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,1.75)+ );+#4869 = SURFACE_CURVE('',#4870,(#4876,#4885),.PCURVE_S1.);+#4870 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4871,#4872,#4873,#4874,#4875),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4871 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,1.75)+ );+#4872 = CARTESIAN_POINT('',(-5.065801427827E-02,8.406220096238E-02,1.75)+ );+#4873 = CARTESIAN_POINT('',(-5.748598686955E-02,8.243398365285E-02,1.75)+ );+#4874 = CARTESIAN_POINT('',(-6.428762722645E-02,8.035933700694E-02,1.75)+ );+#4875 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,1.75)+ );+#4876 = PCURVE('',#2438,#4877);+#4877 = DEFINITIONAL_REPRESENTATION('',(#4878),#4884);+#4878 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4879,#4880,#4881,#4882,#4883),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4879 = CARTESIAN_POINT('',(2.72166874822,-1.569952163994E-02));+#4880 = CARTESIAN_POINT('',(2.718528092215,-9.493563547108E-03));+#4881 = CARTESIAN_POINT('',(2.715761424495,-3.042373653571E-03));+#4882 = CARTESIAN_POINT('',(2.713368750771,3.654012140505E-03));+#4883 = CARTESIAN_POINT('',(2.711350055231,1.059554383366E-02));+#4884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4885 = PCURVE('',#4886,#4893);+#4886 = SURFACE_OF_LINEAR_EXTRUSION('',#4887,#4891);+#4887 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4888,#4889,#4890),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4888 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.8000001));+#4889 = CARTESIAN_POINT('',(-5.75121068707E-02,8.288046086024E-02,+ 1.8000001));+#4890 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.8000001));+#4891 = VECTOR('',#4892,1.);+#4892 = DIRECTION('',(0.,0.,1.));+#4893 = DEFINITIONAL_REPRESENTATION('',(#4894),#4900);+#4894 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4895,#4896,#4897,#4898,#4899),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4895 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4896 = CARTESIAN_POINT('',(0.749996717069,-5.00001E-02));+#4897 = CARTESIAN_POINT('',(0.499994823431,-5.00001E-02));+#4898 = CARTESIAN_POINT('',(0.249995518192,-5.00001E-02));+#4899 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4901 = ORIENTED_EDGE('',*,*,#4902,.T.);+#4902 = EDGE_CURVE('',#4867,#4903,#4905,.T.);+#4903 = VERTEX_POINT('',#4904);+#4904 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,1.75));+#4905 = SURFACE_CURVE('',#4906,(#4910,#4917),.PCURVE_S1.);+#4906 = LINE('',#4907,#4908);+#4907 = CARTESIAN_POINT('',(-7.106290465393E-02,1.226832033858,1.75));+#4908 = VECTOR('',#4909,1.);+#4909 = DIRECTION('',(0.,1.,0.));+#4910 = PCURVE('',#2438,#4911);+#4911 = DEFINITIONAL_REPRESENTATION('',(#4912),#4916);+#4912 = LINE('',#4913,#4914);+#4913 = CARTESIAN_POINT('',(1.789217532947,-0.674866492784));+#4914 = VECTOR('',#4915,1.);+#4915 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4917 = PCURVE('',#4918,#4923);+#4918 = PLANE('',#4919);+#4919 = AXIS2_PLACEMENT_3D('',#4920,#4921,#4922);+#4920 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,1.8000001+ ));+#4921 = DIRECTION('',(-1.,0.,0.));+#4922 = DIRECTION('',(0.,-1.,0.));+#4923 = DEFINITIONAL_REPRESENTATION('',(#4924),#4927);+#4924 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4925,#4926),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.148993730313,-1.033339246907),.PIECEWISE_BEZIER_KNOTS.);+#4925 = CARTESIAN_POINT('',(0.115654483406,-5.00001E-02));+#4926 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4928 = ORIENTED_EDGE('',*,*,#4929,.T.);+#4929 = EDGE_CURVE('',#4903,#4930,#4932,.T.);+#4930 = VERTEX_POINT('',#4931);+#4931 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.75));+#4932 = SURFACE_CURVE('',#4933,(#4937,#4944),.PCURVE_S1.);+#4933 = LINE('',#4934,#4935);+#4934 = CARTESIAN_POINT('',(-0.785445710518,0.193492786951,1.75));+#4935 = VECTOR('',#4936,1.);+#4936 = DIRECTION('',(1.,-0.,0.));+#4937 = PCURVE('',#2438,#4938);+#4938 = DEFINITIONAL_REPRESENTATION('',(#4939),#4943);+#4939 = LINE('',#4940,#4941);+#4940 = CARTESIAN_POINT('',(2.192347176628,0.514931508096));+#4941 = VECTOR('',#4942,1.);+#4942 = DIRECTION('',(0.596575959062,-0.802556617983));+#4943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4944 = PCURVE('',#4945,#4950);+#4945 = PLANE('',#4946);+#4946 = AXIS2_PLACEMENT_3D('',#4947,#4948,#4949);+#4947 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.8000001));+#4948 = DIRECTION('',(0.,1.,0.));+#4949 = DIRECTION('',(-1.,0.,0.));+#4950 = DEFINITIONAL_REPRESENTATION('',(#4951),#4954);+#4951 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4952,#4953),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.714382805864,0.894639929864),.PIECEWISE_BEZIER_KNOTS.);+#4952 = CARTESIAN_POINT('',(0.180257124,-5.00001E-02));+#4953 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4955 = ORIENTED_EDGE('',*,*,#4956,.T.);+#4956 = EDGE_CURVE('',#4930,#4199,#4957,.T.);+#4957 = SURFACE_CURVE('',#4958,(#4962,#4969),.PCURVE_S1.);+#4958 = LINE('',#4959,#4960);+#4959 = CARTESIAN_POINT('',(0.109194219346,1.253618494592,1.75));+#4960 = VECTOR('',#4961,1.);+#4961 = DIRECTION('',(0.,1.,0.));+#4962 = PCURVE('',#2438,#4963);+#4963 = DEFINITIONAL_REPRESENTATION('',(#4964),#4968);+#4964 = LINE('',#4965,#4966);+#4965 = CARTESIAN_POINT('',(1.875256948241,-0.835513199092));+#4966 = VECTOR('',#4967,1.);+#4967 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4969 = PCURVE('',#4970,#4975);+#4970 = PLANE('',#4971);+#4971 = AXIS2_PLACEMENT_3D('',#4972,#4973,#4974);+#4972 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.8000001));+#4973 = DIRECTION('',(-1.,0.,0.));+#4974 = DIRECTION('',(0.,-1.,0.));+#4975 = DEFINITIONAL_REPRESENTATION('',(#4976),#4979);+#4976 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4977,#4978),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.060125707641,-1.006552786173),.PIECEWISE_BEZIER_KNOTS.);+#4977 = CARTESIAN_POINT('',(5.35729214686E-02,-5.00001E-02));+#4978 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4980 = FACE_BOUND('',#4981,.F.);+#4981 = EDGE_LOOP('',(#4982,#5011,#5038,#5065,#5092,#5119));+#4982 = ORIENTED_EDGE('',*,*,#4983,.T.);+#4983 = EDGE_CURVE('',#4984,#4986,#4988,.T.);+#4984 = VERTEX_POINT('',#4985);+#4985 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.75));+#4986 = VERTEX_POINT('',#4987);+#4987 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.75));+#4988 = SURFACE_CURVE('',#4989,(#4993,#5000),.PCURVE_S1.);+#4989 = LINE('',#4990,#4991);+#4990 = CARTESIAN_POINT('',(-1.09758676178,0.24706570842,1.75));+#4991 = VECTOR('',#4992,1.);+#4992 = DIRECTION('',(-1.,-0.,-0.));+#4993 = PCURVE('',#2438,#4994);+#4994 = DEFINITIONAL_REPRESENTATION('',(#4995),#4999);+#4995 = LINE('',#4996,#4997);+#4996 = CARTESIAN_POINT('',(1.963136026939,0.733482057526));+#4997 = VECTOR('',#4998,1.);+#4998 = DIRECTION('',(-0.596575959062,0.802556617983));+#4999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5000 = PCURVE('',#5001,#5006);+#5001 = PLANE('',#5002);+#5002 = AXIS2_PLACEMENT_3D('',#5003,#5004,#5005);+#5003 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.8000001));+#5004 = DIRECTION('',(0.,-1.,0.));+#5005 = DIRECTION('',(1.,0.,0.));+#5006 = DEFINITIONAL_REPRESENTATION('',(#5007),#5010);+#5007 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5008,#5009),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.646471249532,-0.582498878602),.PIECEWISE_BEZIER_KNOTS.);+#5008 = CARTESIAN_POINT('',(6.397237093015E-02,-5.00001E-02));+#5009 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5011 = ORIENTED_EDGE('',*,*,#5012,.T.);+#5012 = EDGE_CURVE('',#4986,#5013,#5015,.T.);+#5013 = VERTEX_POINT('',#5014);+#5014 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.75));+#5015 = SURFACE_CURVE('',#5016,(#5020,#5027),.PCURVE_S1.);+#5016 = LINE('',#5017,#5018);+#5017 = CARTESIAN_POINT('',(-0.515087883179,1.018370342379,1.75));+#5018 = VECTOR('',#5019,1.);+#5019 = DIRECTION('',(0.,-1.,0.));+#5020 = PCURVE('',#2438,#5021);+#5021 = DEFINITIONAL_REPRESENTATION('',(#5022),#5026);+#5022 = LINE('',#5023,#5024);+#5023 = CARTESIAN_POINT('',(1.691625215629,-0.194148074197));+#5024 = VECTOR('',#5025,1.);+#5025 = DIRECTION('',(0.802556617983,0.596575959062));+#5026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5027 = PCURVE('',#5028,#5033);+#5028 = PLANE('',#5029);+#5029 = AXIS2_PLACEMENT_3D('',#5030,#5031,#5032);+#5030 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.8000001));+#5031 = DIRECTION('',(1.,0.,0.));+#5032 = DIRECTION('',(0.,1.,0.));+#5033 = DEFINITIONAL_REPRESENTATION('',(#5034),#5037);+#5034 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5035,#5036),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.771304633959,1.241800938386),.PIECEWISE_BEZIER_KNOTS.);+#5035 = CARTESIAN_POINT('',(0.470496304427,-5.00001E-02));+#5036 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5038 = ORIENTED_EDGE('',*,*,#5039,.T.);+#5039 = EDGE_CURVE('',#5013,#5040,#5042,.T.);+#5040 = VERTEX_POINT('',#5041);+#5041 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.75));+#5042 = SURFACE_CURVE('',#5043,(#5047,#5054),.PCURVE_S1.);+#5043 = LINE('',#5044,#5045);+#5044 = CARTESIAN_POINT('',(-0.951994469319,-0.223430596007,1.75));+#5045 = VECTOR('',#5046,1.);+#5046 = DIRECTION('',(1.,-0.,0.));+#5047 = PCURVE('',#2438,#5048);+#5048 = DEFINITIONAL_REPRESENTATION('',(#5049),#5053);+#5049 = LINE('',#5050,#5051);+#5050 = CARTESIAN_POINT('',(2.427592811301,0.897322783732));+#5051 = VECTOR('',#5052,1.);+#5052 = DIRECTION('',(0.596575959062,-0.802556617983));+#5053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5054 = PCURVE('',#5055,#5060);+#5055 = PLANE('',#5056);+#5056 = AXIS2_PLACEMENT_3D('',#5057,#5058,#5059);+#5057 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.8000001));+#5058 = DIRECTION('',(0.,1.,0.));+#5059 = DIRECTION('',(-1.,0.,0.));+#5060 = DEFINITIONAL_REPRESENTATION('',(#5061),#5064);+#5061 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5062,#5063),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.43690658614,0.728091171063),.PIECEWISE_BEZIER_KNOTS.);+#5062 = CARTESIAN_POINT('',(0.291184584923,-5.00001E-02));+#5063 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5065 = ORIENTED_EDGE('',*,*,#5066,.T.);+#5066 = EDGE_CURVE('',#5040,#5067,#5069,.T.);+#5067 = VERTEX_POINT('',#5068);+#5068 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.75));+#5069 = SURFACE_CURVE('',#5070,(#5074,#5081),.PCURVE_S1.);+#5070 = LINE('',#5071,#5072);+#5071 = CARTESIAN_POINT('',(-0.223903298256,1.045156803113,1.75));+#5072 = VECTOR('',#5073,1.);+#5073 = DIRECTION('',(0.,1.,0.));+#5074 = PCURVE('',#2438,#5075);+#5075 = DEFINITIONAL_REPRESENTATION('',(#5076),#5080);+#5076 = LINE('',#5077,#5078);+#5077 = CARTESIAN_POINT('',(1.843841287309,-0.443820348384));+#5078 = VECTOR('',#5079,1.);+#5079 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5081 = PCURVE('',#5082,#5087);+#5082 = PLANE('',#5083);+#5083 = AXIS2_PLACEMENT_3D('',#5084,#5085,#5086);+#5084 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.8000001));+#5085 = DIRECTION('',(-1.,0.,0.));+#5086 = DIRECTION('',(0.,-1.,0.));+#5087 = DEFINITIONAL_REPRESENTATION('',(#5088),#5091);+#5088 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5089,#5090),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.26858739912,-1.215014477652),.PIECEWISE_BEZIER_KNOTS.);+#5089 = CARTESIAN_POINT('',(5.35729214686E-02,-5.00001E-02));+#5090 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5092 = ORIENTED_EDGE('',*,*,#5093,.T.);+#5093 = EDGE_CURVE('',#5067,#5094,#5096,.T.);+#5094 = VERTEX_POINT('',#5095);+#5095 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.75));+#5096 = SURFACE_CURVE('',#5097,(#5101,#5108),.PCURVE_S1.);+#5097 = LINE('',#5098,#5099);+#5098 = CARTESIAN_POINT('',(-1.065600576315,-0.169857674539,1.75));+#5099 = VECTOR('',#5100,1.);+#5100 = DIRECTION('',(-1.,-0.,-0.));+#5101 = PCURVE('',#2438,#5102);+#5102 = DEFINITIONAL_REPRESENTATION('',(#5103),#5107);+#5103 = LINE('',#5104,#5105);+#5104 = CARTESIAN_POINT('',(2.316822836395,0.956537799741));+#5105 = VECTOR('',#5106,1.);+#5106 = DIRECTION('',(-0.596575959062,0.802556617983));+#5107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5108 = PCURVE('',#5109,#5114);+#5109 = PLANE('',#5110);+#5110 = AXIS2_PLACEMENT_3D('',#5111,#5112,#5113);+#5111 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.8000001));+#5112 = DIRECTION('',(0.,-1.,0.));+#5113 = DIRECTION('',(1.,0.,0.));+#5114 = DEFINITIONAL_REPRESENTATION('',(#5115),#5118);+#5115 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5116,#5117),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.84169727806,-0.614485064067),.PIECEWISE_BEZIER_KNOTS.);+#5116 = CARTESIAN_POINT('',(0.227212213993,-5.00001E-02));+#5117 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5119 = ORIENTED_EDGE('',*,*,#5120,.T.);+#5120 = EDGE_CURVE('',#5094,#4984,#5121,.T.);+#5121 = SURFACE_CURVE('',#5122,(#5126,#5133),.PCURVE_S1.);+#5122 = LINE('',#5123,#5124);+#5123 = CARTESIAN_POINT('',(-0.451115512249,1.253618494592,1.75));+#5124 = VECTOR('',#5125,1.);+#5125 = DIRECTION('',(0.,1.,0.));+#5126 = PCURVE('',#2438,#5127);+#5127 = DEFINITIONAL_REPRESENTATION('',(#5128),#5132);+#5128 = LINE('',#5129,#5130);+#5129 = CARTESIAN_POINT('',(1.540989632742,-0.385832915879));+#5130 = VECTOR('',#5131,1.);+#5131 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5133 = PCURVE('',#5134,#5139);+#5134 = PLANE('',#5135);+#5135 = AXIS2_PLACEMENT_3D('',#5136,#5137,#5138);+#5136 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.8000001));+#5137 = DIRECTION('',(-1.,0.,0.));+#5138 = DIRECTION('',(0.,-1.,0.));+#5139 = DEFINITIONAL_REPRESENTATION('',(#5140),#5143);+#5140 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5141,#5142),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.423476169131,-1.006552786173),.PIECEWISE_BEZIER_KNOTS.);+#5141 = CARTESIAN_POINT('',(0.416923382959,-5.00001E-02));+#5142 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5144 = FACE_BOUND('',#5145,.F.);+#5145 = EDGE_LOOP('',(#5146,#5175,#5202,#5229,#5256,#5283,#5310,#5337,+ #5364,#5391,#5418,#5445));+#5146 = ORIENTED_EDGE('',*,*,#5147,.T.);+#5147 = EDGE_CURVE('',#5148,#5150,#5152,.T.);+#5148 = VERTEX_POINT('',#5149);+#5149 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.75));+#5150 = VERTEX_POINT('',#5151);+#5151 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.75));+#5152 = SURFACE_CURVE('',#5153,(#5157,#5164),.PCURVE_S1.);+#5153 = LINE('',#5154,#5155);+#5154 = CARTESIAN_POINT('',(-1.312193582487,0.24706570842,1.75));+#5155 = VECTOR('',#5156,1.);+#5156 = DIRECTION('',(-1.,-0.,-0.));+#5157 = PCURVE('',#2438,#5158);+#5158 = DEFINITIONAL_REPRESENTATION('',(#5159),#5163);+#5159 = LINE('',#5160,#5161);+#5160 = CARTESIAN_POINT('',(1.835106757055,0.905716181748));+#5161 = VECTOR('',#5162,1.);+#5162 = DIRECTION('',(-0.596575959062,0.802556617983));+#5163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5164 = PCURVE('',#5165,#5170);+#5165 = PLANE('',#5166);+#5166 = AXIS2_PLACEMENT_3D('',#5167,#5168,#5169);+#5167 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.8000001));+#5168 = DIRECTION('',(0.,-1.,0.));+#5169 = DIRECTION('',(1.,0.,0.));+#5170 = DEFINITIONAL_REPRESENTATION('',(#5171),#5174);+#5171 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5172,#5173),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.436276316475,-0.367892057895),.PIECEWISE_BEZIER_KNOTS.);+#5172 = CARTESIAN_POINT('',(6.83842585805E-02,-5.00001E-02));+#5173 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5175 = ORIENTED_EDGE('',*,*,#5176,.T.);+#5176 = EDGE_CURVE('',#5150,#5177,#5179,.T.);+#5177 = VERTEX_POINT('',#5178);+#5178 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,1.75));+#5179 = SURFACE_CURVE('',#5180,(#5184,#5191),.PCURVE_S1.);+#5180 = LINE('',#5181,#5182);+#5181 = CARTESIAN_POINT('',(-1.426561076669,1.030737480544,1.75));+#5182 = VECTOR('',#5183,1.);+#5183 = DIRECTION('',(0.524097425664,-0.851658316705,0.));+#5184 = PCURVE('',#2438,#5185);+#5185 = DEFINITIONAL_REPRESENTATION('',(#5186),#5190);+#5186 = LINE('',#5187,#5188);+#5187 = CARTESIAN_POINT('',(1.137936892483,0.529982832041));+#5188 = VECTOR('',#5189,1.);+#5189 = DIRECTION('',(0.99616794269,8.746101964642E-02));+#5190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5191 = PCURVE('',#5192,#5197);+#5192 = PLANE('',#5193);+#5193 = AXIS2_PLACEMENT_3D('',#5194,#5195,#5196);+#5194 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,1.8000001+ ));+#5195 = DIRECTION('',(0.851658316705,0.524097425664,0.));+#5196 = DIRECTION('',(-0.524097425664,0.851658316705,0.));+#5197 = DEFINITIONAL_REPRESENTATION('',(#5198),#5201);+#5198 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5199,#5200),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.920171572042,1.17992909198),.PIECEWISE_BEZIER_KNOTS.);+#5199 = CARTESIAN_POINT('',(0.259757519938,-5.00001E-02));+#5200 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5202 = ORIENTED_EDGE('',*,*,#5203,.T.);+#5203 = EDGE_CURVE('',#5177,#5204,#5206,.T.);+#5204 = VERTEX_POINT('',#5205);+#5205 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.75));+#5206 = SURFACE_CURVE('',#5207,(#5211,#5218),.PCURVE_S1.);+#5207 = LINE('',#5208,#5209);+#5208 = CARTESIAN_POINT('',(-0.506844520325,0.502527329449,1.75));+#5209 = VECTOR('',#5210,1.);+#5210 = DIRECTION('',(-0.534314599555,-0.845285696497,-0.));+#5211 = PCURVE('',#2438,#5212);+#5212 = DEFINITIONAL_REPRESENTATION('',(#5213),#5217);+#5213 = LINE('',#5214,#5215);+#5214 = CARTESIAN_POINT('',(2.110536231597,0.106975700555));+#5215 = VECTOR('',#5216,1.);+#5216 = DIRECTION('',(0.359630385139,0.933094843028));+#5217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5218 = PCURVE('',#5219,#5224);+#5219 = PLANE('',#5220);+#5220 = AXIS2_PLACEMENT_3D('',#5221,#5222,#5223);+#5221 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.8000001));+#5222 = DIRECTION('',(0.845285696497,-0.534314599555,0.));+#5223 = DIRECTION('',(0.534314599555,0.845285696497,0.));+#5224 = DEFINITIONAL_REPRESENTATION('',(#5225),#5228);+#5225 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5226,#5227),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.563935099324,0.858831432337),.PIECEWISE_BEZIER_KNOTS.);+#5226 = CARTESIAN_POINT('',(0.294896333013,-5.00001E-02));+#5227 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5229 = ORIENTED_EDGE('',*,*,#5230,.T.);+#5230 = EDGE_CURVE('',#5204,#5231,#5233,.T.);+#5231 = VERTEX_POINT('',#5232);+#5232 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.75));+#5233 = SURFACE_CURVE('',#5234,(#5238,#5245),.PCURVE_S1.);+#5234 = LINE('',#5235,#5236);+#5235 = CARTESIAN_POINT('',(-1.288558470074,-0.223430596007,1.75));+#5236 = VECTOR('',#5237,1.);+#5237 = DIRECTION('',(1.,-0.,0.));+#5238 = PCURVE('',#2438,#5239);+#5239 = DEFINITIONAL_REPRESENTATION('',(#5240),#5244);+#5240 = LINE('',#5241,#5242);+#5241 = CARTESIAN_POINT('',(2.226806819765,1.167434449914));+#5242 = VECTOR('',#5243,1.);+#5243 = DIRECTION('',(0.596575959062,-0.802556617983));+#5244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5245 = PCURVE('',#5246,#5251);+#5246 = PLANE('',#5247);+#5247 = AXIS2_PLACEMENT_3D('',#5248,#5249,#5250);+#5248 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.8000001));+#5249 = DIRECTION('',(0.,1.,0.));+#5250 = DIRECTION('',(-1.,0.,0.));+#5251 = DEFINITIONAL_REPRESENTATION('',(#5252),#5255);+#5252 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5253,#5254),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.322827776895,0.391527170308),.PIECEWISE_BEZIER_KNOTS.);+#5253 = CARTESIAN_POINT('',(6.869939341267E-02,-5.00001E-02));+#5254 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5256 = ORIENTED_EDGE('',*,*,#5257,.T.);+#5257 = EDGE_CURVE('',#5231,#5258,#5260,.T.);+#5258 = VERTEX_POINT('',#5259);+#5259 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.75));+#5260 = SURFACE_CURVE('',#5261,(#5265,#5272),.PCURVE_S1.);+#5261 = LINE('',#5262,#5263);+#5262 = CARTESIAN_POINT('',(-0.388220800011,0.604835609925,1.75));+#5263 = VECTOR('',#5264,1.);+#5264 = DIRECTION('',(0.523431850076,0.852067543289,0.));+#5265 = PCURVE('',#2438,#5266);+#5266 = DEFINITIONAL_REPRESENTATION('',(#5267),#5271);+#5267 = LINE('',#5268,#5269);+#5268 = CARTESIAN_POINT('',(2.09919610374,-4.926121177838E-02));+#5269 = VECTOR('',#5270,1.);+#5270 = DIRECTION('',(-0.371565587872,-0.928406707165));+#5271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5272 = PCURVE('',#5273,#5278);+#5273 = PLANE('',#5274);+#5274 = AXIS2_PLACEMENT_3D('',#5275,#5276,#5277);+#5275 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.8000001)+ );+#5276 = DIRECTION('',(-0.852067543289,0.523431850076,0.));+#5277 = DIRECTION('',(-0.523431850076,-0.852067543289,0.));+#5278 = DEFINITIONAL_REPRESENTATION('',(#5279),#5282);+#5279 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5280,#5281),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.972066372503,-0.734254594927),.PIECEWISE_BEZIER_KNOTS.);+#5280 = CARTESIAN_POINT('',(0.237811777576,-5.00001E-02));+#5281 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5283 = ORIENTED_EDGE('',*,*,#5284,.T.);+#5284 = EDGE_CURVE('',#5258,#5285,#5287,.T.);+#5285 = VERTEX_POINT('',#5286);+#5286 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.75));+#5287 = SURFACE_CURVE('',#5288,(#5292,#5299),.PCURVE_S1.);+#5288 = LINE('',#5289,#5290);+#5289 = CARTESIAN_POINT('',(-1.316237388953,0.93436240079,1.75));+#5290 = VECTOR('',#5291,1.);+#5291 = DIRECTION('',(0.494682680526,-0.869073670978,0.));+#5292 = PCURVE('',#2438,#5293);+#5293 = DEFINITIONAL_REPRESENTATION('',(#5294),#5298);+#5294 = LINE('',#5295,#5296);+#5295 = CARTESIAN_POINT('',(1.281099810355,0.498936881978));+#5296 = VECTOR('',#5297,1.);+#5297 = DIRECTION('',(0.992596620725,0.121457599702));+#5298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5299 = PCURVE('',#5300,#5305);+#5300 = PLANE('',#5301);+#5301 = AXIS2_PLACEMENT_3D('',#5302,#5303,#5304);+#5302 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.8000001));+#5303 = DIRECTION('',(0.869073670978,0.494682680526,0.));+#5304 = DIRECTION('',(-0.494682680526,0.869073670978,0.));+#5305 = DEFINITIONAL_REPRESENTATION('',(#5306),#5309);+#5306 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5307,#5308),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.099056767693,1.332215018657),.PIECEWISE_BEZIER_KNOTS.);+#5307 = CARTESIAN_POINT('',(0.233158250964,-5.00001E-02));+#5308 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5310 = ORIENTED_EDGE('',*,*,#5311,.T.);+#5311 = EDGE_CURVE('',#5285,#5312,#5314,.T.);+#5312 = VERTEX_POINT('',#5313);+#5313 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.75));+#5314 = SURFACE_CURVE('',#5315,(#5319,#5326),.PCURVE_S1.);+#5315 = LINE('',#5316,#5317);+#5316 = CARTESIAN_POINT('',(-1.134457537144,-0.223430596007,1.75));+#5317 = VECTOR('',#5318,1.);+#5318 = DIRECTION('',(1.,-0.,0.));+#5319 = PCURVE('',#2438,#5320);+#5320 = DEFINITIONAL_REPRESENTATION('',(#5321),#5325);+#5321 = LINE('',#5322,#5323);+#5322 = CARTESIAN_POINT('',(2.31873973162,1.043759726353));+#5323 = VECTOR('',#5324,1.);+#5324 = DIRECTION('',(0.596575959062,-0.802556617983));+#5325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5326 = PCURVE('',#5327,#5332);+#5327 = PLANE('',#5328);+#5328 = AXIS2_PLACEMENT_3D('',#5329,#5330,#5331);+#5329 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.8000001));+#5330 = DIRECTION('',(0.,1.,0.));+#5331 = DIRECTION('',(-1.,0.,0.));+#5332 = DEFINITIONAL_REPRESENTATION('',(#5333),#5336);+#5333 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5334,#5335),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.477243844657,0.545628103238),.PIECEWISE_BEZIER_KNOTS.);+#5334 = CARTESIAN_POINT('',(6.83842585805E-02,-5.00001E-02));+#5335 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5337 = ORIENTED_EDGE('',*,*,#5338,.T.);+#5338 = EDGE_CURVE('',#5312,#5339,#5341,.T.);+#5339 = VERTEX_POINT('',#5340);+#5340 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,1.75));+#5341 = SURFACE_CURVE('',#5342,(#5346,#5353),.PCURVE_S1.);+#5342 = LINE('',#5343,#5344);+#5343 = CARTESIAN_POINT('',(-1.360923157052,1.05157177353,1.75));+#5344 = VECTOR('',#5345,1.);+#5345 = DIRECTION('',(-0.517990116776,0.855386602024,0.));+#5346 = PCURVE('',#2438,#5347);+#5347 = DEFINITIONAL_REPRESENTATION('',(#5348),#5352);+#5348 = LINE('',#5349,#5350);+#5349 = CARTESIAN_POINT('',(1.160374197612,0.464875446943));+#5350 = VECTOR('',#5351,1.);+#5351 = DIRECTION('',(-0.995516629089,-9.458668620329E-02));+#5352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5353 = PCURVE('',#5354,#5359);+#5354 = PLANE('',#5355);+#5355 = AXIS2_PLACEMENT_3D('',#5356,#5357,#5358);+#5356 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,1.8000001+ ));+#5357 = DIRECTION('',(-0.855386602024,-0.517990116776,0.));+#5358 = DIRECTION('',(0.517990116776,-0.855386602024,0.));+#5359 = DEFINITIONAL_REPRESENTATION('',(#5360),#5363);+#5360 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5361,#5362),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.490556862266,-1.199142837712),.PIECEWISE_BEZIER_KNOTS.);+#5361 = CARTESIAN_POINT('',(0.291414024554,-5.00001E-02));+#5362 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5364 = ORIENTED_EDGE('',*,*,#5365,.T.);+#5365 = EDGE_CURVE('',#5339,#5366,#5368,.T.);+#5366 = VERTEX_POINT('',#5367);+#5367 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.75));+#5368 = SURFACE_CURVE('',#5369,(#5373,#5380),.PCURVE_S1.);+#5369 = LINE('',#5370,#5371);+#5370 = CARTESIAN_POINT('',(-0.298838110748,0.718325434879,1.75));+#5371 = VECTOR('',#5372,1.);+#5372 = DIRECTION('',(0.537108720626,0.843513024338,0.));+#5373 = PCURVE('',#2438,#5374);+#5374 = DEFINITIONAL_REPRESENTATION('',(#5375),#5379);+#5375 = LINE('',#5376,#5377);+#5376 = CARTESIAN_POINT('',(2.06143765722,-0.188701181746));+#5377 = VECTOR('',#5378,1.);+#5378 = DIRECTION('',(-0.35654080991,-0.934279749791));+#5379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5380 = PCURVE('',#5381,#5386);+#5381 = PLANE('',#5382);+#5382 = AXIS2_PLACEMENT_3D('',#5383,#5384,#5385);+#5383 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.8000001));+#5384 = DIRECTION('',(-0.843513024338,0.537108720626,0.));+#5385 = DIRECTION('',(-0.537108720626,-0.843513024338,0.));+#5386 = DEFINITIONAL_REPRESENTATION('',(#5387),#5390);+#5387 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5388,#5389),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.820952799377,-0.558686959017),.PIECEWISE_BEZIER_KNOTS.);+#5388 = CARTESIAN_POINT('',(0.262265840359,-5.00001E-02));+#5389 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5391 = ORIENTED_EDGE('',*,*,#5392,.T.);+#5392 = EDGE_CURVE('',#5366,#5393,#5395,.T.);+#5393 = VERTEX_POINT('',#5394);+#5394 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.75));+#5395 = SURFACE_CURVE('',#5396,(#5400,#5407),.PCURVE_S1.);+#5396 = LINE('',#5397,#5398);+#5397 = CARTESIAN_POINT('',(-1.173691823749,0.24706570842,1.75));+#5398 = VECTOR('',#5399,1.);+#5399 = DIRECTION('',(-1.,-0.,-0.));+#5400 = PCURVE('',#2438,#5401);+#5401 = DEFINITIONAL_REPRESENTATION('',(#5402),#5406);+#5402 = LINE('',#5403,#5404);+#5403 = CARTESIAN_POINT('',(1.917733576606,0.794560678671));+#5404 = VECTOR('',#5405,1.);+#5405 = DIRECTION('',(-0.596575959062,0.802556617983));+#5406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5407 = PCURVE('',#5408,#5413);+#5408 = PLANE('',#5409);+#5409 = AXIS2_PLACEMENT_3D('',#5410,#5411,#5412);+#5410 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.8000001));+#5411 = DIRECTION('',(0.,-1.,0.));+#5412 = DIRECTION('',(1.,0.,0.));+#5413 = DEFINITIONAL_REPRESENTATION('',(#5414),#5417);+#5414 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5415,#5416),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.574778075213,-0.506393816633),.PIECEWISE_BEZIER_KNOTS.);+#5415 = CARTESIAN_POINT('',(6.83842585805E-02,-5.00001E-02));+#5416 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5418 = ORIENTED_EDGE('',*,*,#5419,.T.);+#5419 = EDGE_CURVE('',#5393,#5420,#5422,.T.);+#5420 = VERTEX_POINT('',#5421);+#5421 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.75));+#5422 = SURFACE_CURVE('',#5423,(#5427,#5434),.PCURVE_S1.);+#5423 = LINE('',#5424,#5425);+#5424 = CARTESIAN_POINT('',(-0.410065118256,0.680664859402,1.75));+#5425 = VECTOR('',#5426,1.);+#5426 = DIRECTION('',(-0.510221065095,-0.86004329236,-0.));+#5427 = PCURVE('',#2438,#5428);+#5428 = DEFINITIONAL_REPRESENTATION('',(#5429),#5433);+#5429 = LINE('',#5430,#5431);+#5430 = CARTESIAN_POINT('',(2.025307042628,-7.696781683723E-02));+#5431 = VECTOR('',#5432,1.);+#5432 = DIRECTION('',(0.385847814793,0.922562444401));+#5433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5434 = PCURVE('',#5435,#5440);+#5435 = PLANE('',#5436);+#5436 = AXIS2_PLACEMENT_3D('',#5437,#5438,#5439);+#5437 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.8000001)+ );+#5438 = DIRECTION('',(0.86004329236,-0.510221065095,0.));+#5439 = DIRECTION('',(0.510221065095,0.86004329236,0.));+#5440 = DEFINITIONAL_REPRESENTATION('',(#5441),#5444);+#5441 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5442,#5443),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.504159679907,0.710452679442),.PIECEWISE_BEZIER_KNOTS.);+#5442 = CARTESIAN_POINT('',(0.206292999535,-5.00001E-02));+#5443 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5445 = ORIENTED_EDGE('',*,*,#5446,.T.);+#5446 = EDGE_CURVE('',#5420,#5148,#5447,.T.);+#5447 = SURFACE_CURVE('',#5448,(#5452,#5459),.PCURVE_S1.);+#5448 = LINE('',#5449,#5450);+#5449 = CARTESIAN_POINT('',(-1.415618761231,1.173443579787,1.75));+#5450 = VECTOR('',#5451,1.);+#5451 = DIRECTION('',(-0.503393828259,0.864057089359,0.));+#5452 = PCURVE('',#2438,#5453);+#5453 = DEFINITIONAL_REPRESENTATION('',(#5454),#5458);+#5454 = LINE('',#5455,#5456);+#5455 = CARTESIAN_POINT('',(1.029935090435,0.43606597635));+#5456 = VECTOR('',#5457,1.);+#5457 = DIRECTION('',(-0.99376739126,-0.111473638448));+#5458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5459 = PCURVE('',#5460,#5465);+#5460 = PLANE('',#5461);+#5461 = AXIS2_PLACEMENT_3D('',#5462,#5463,#5464);+#5462 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.8000001));+#5463 = DIRECTION('',(-0.864057089359,-0.503393828259,0.));+#5464 = DIRECTION('',(0.503393828259,-0.864057089359,0.));+#5465 = DEFINITIONAL_REPRESENTATION('',(#5466),#5469);+#5466 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5467,#5468),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.277460477406,-1.072125768976),.PIECEWISE_BEZIER_KNOTS.);+#5467 = CARTESIAN_POINT('',(0.20533470843,-5.00001E-02));+#5468 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5470 = ADVANCED_FACE('',(#5471),#5460,.T.);+#5471 = FACE_BOUND('',#5472,.T.);+#5472 = EDGE_LOOP('',(#5473,#5474,#5497,#5525));+#5473 = ORIENTED_EDGE('',*,*,#5446,.T.);+#5474 = ORIENTED_EDGE('',*,*,#5475,.T.);+#5475 = EDGE_CURVE('',#5148,#5476,#5478,.T.);+#5476 = VERTEX_POINT('',#5477);+#5477 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.7000001));+#5478 = SURFACE_CURVE('',#5479,(#5483,#5490),.PCURVE_S1.);+#5479 = LINE('',#5480,#5481);+#5480 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.8000001));+#5481 = VECTOR('',#5482,1.);+#5482 = DIRECTION('',(-0.,-0.,-1.));+#5483 = PCURVE('',#5460,#5484);+#5484 = DEFINITIONAL_REPRESENTATION('',(#5485),#5489);+#5485 = LINE('',#5486,#5487);+#5486 = CARTESIAN_POINT('',(0.,0.));+#5487 = VECTOR('',#5488,1.);+#5488 = DIRECTION('',(0.,-1.));+#5489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5490 = PCURVE('',#5165,#5491);+#5491 = DEFINITIONAL_REPRESENTATION('',(#5492),#5496);+#5492 = LINE('',#5493,#5494);+#5493 = CARTESIAN_POINT('',(6.83842585805E-02,0.));+#5494 = VECTOR('',#5495,1.);+#5495 = DIRECTION('',(0.,-1.));+#5496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5497 = ORIENTED_EDGE('',*,*,#5498,.T.);+#5498 = EDGE_CURVE('',#5476,#5499,#5501,.T.);+#5499 = VERTEX_POINT('',#5500);+#5500 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.7000001)+ );+#5501 = SURFACE_CURVE('',#5502,(#5506,#5513),.PCURVE_S1.);+#5502 = LINE('',#5503,#5504);+#5503 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.7000001));+#5504 = VECTOR('',#5505,1.);+#5505 = DIRECTION('',(0.503393828259,-0.864057089359,0.));+#5506 = PCURVE('',#5460,#5507);+#5507 = DEFINITIONAL_REPRESENTATION('',(#5508),#5512);+#5508 = LINE('',#5509,#5510);+#5509 = CARTESIAN_POINT('',(0.,-0.1));+#5510 = VECTOR('',#5511,1.);+#5511 = DIRECTION('',(1.,0.));+#5512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5513 = PCURVE('',#5514,#5519);+#5514 = PLANE('',#5515);+#5515 = AXIS2_PLACEMENT_3D('',#5516,#5517,#5518);+#5516 = CARTESIAN_POINT('',(-0.971403120159,-0.223430596007,1.7000001));+#5517 = DIRECTION('',(0.,0.,1.));+#5518 = DIRECTION('',(1.,0.,0.));+#5519 = DEFINITIONAL_REPRESENTATION('',(#5520),#5524);+#5520 = LINE('',#5521,#5522);+#5521 = CARTESIAN_POINT('',(9.548585414697E-02,0.470496304427));+#5522 = VECTOR('',#5523,1.);+#5523 = DIRECTION('',(0.503393828259,-0.864057089359));+#5524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5525 = ORIENTED_EDGE('',*,*,#5526,.F.);+#5526 = EDGE_CURVE('',#5420,#5499,#5527,.T.);+#5527 = SURFACE_CURVE('',#5528,(#5532,#5539),.PCURVE_S1.);+#5528 = LINE('',#5529,#5530);+#5529 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.8000001)+ );+#5530 = VECTOR('',#5531,1.);+#5531 = DIRECTION('',(-0.,-0.,-1.));+#5532 = PCURVE('',#5460,#5533);+#5533 = DEFINITIONAL_REPRESENTATION('',(#5534),#5538);+#5534 = LINE('',#5535,#5536);+#5535 = CARTESIAN_POINT('',(0.20533470843,0.));+#5536 = VECTOR('',#5537,1.);+#5537 = DIRECTION('',(0.,-1.));+#5538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5539 = PCURVE('',#5435,#5540);+#5540 = DEFINITIONAL_REPRESENTATION('',(#5541),#5545);+#5541 = LINE('',#5542,#5543);+#5542 = CARTESIAN_POINT('',(0.,0.));+#5543 = VECTOR('',#5544,1.);+#5544 = DIRECTION('',(0.,-1.));+#5545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5546 = ADVANCED_FACE('',(#5547),#5514,.T.);+#5547 = FACE_BOUND('',#5548,.F.);+#5548 = EDGE_LOOP('',(#5549,#5574,#5595,#5596,#5619,#5642,#5665,#5688,+ #5711,#5734,#5757,#5780));+#5549 = ORIENTED_EDGE('',*,*,#5550,.T.);+#5550 = EDGE_CURVE('',#5551,#5553,#5555,.T.);+#5551 = VERTEX_POINT('',#5552);+#5552 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,1.7000001+ ));+#5553 = VERTEX_POINT('',#5554);+#5554 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.7000001));+#5555 = SURFACE_CURVE('',#5556,(#5560,#5567),.PCURVE_S1.);+#5556 = LINE('',#5557,#5558);+#5557 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,1.7000001+ ));+#5558 = VECTOR('',#5559,1.);+#5559 = DIRECTION('',(-0.524097425664,0.851658316705,0.));+#5560 = PCURVE('',#5514,#5561);+#5561 = DEFINITIONAL_REPRESENTATION('',(#5562),#5566);+#5562 = LINE('',#5563,#5564);+#5563 = CARTESIAN_POINT('',(0.163239843063,0.249271652245));+#5564 = VECTOR('',#5565,1.);+#5565 = DIRECTION('',(-0.524097425664,0.851658316705));+#5566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5567 = PCURVE('',#5192,#5568);+#5568 = DEFINITIONAL_REPRESENTATION('',(#5569),#5573);+#5569 = LINE('',#5570,#5571);+#5570 = CARTESIAN_POINT('',(0.,-0.1));+#5571 = VECTOR('',#5572,1.);+#5572 = DIRECTION('',(1.,0.));+#5573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5574 = ORIENTED_EDGE('',*,*,#5575,.T.);+#5575 = EDGE_CURVE('',#5553,#5476,#5576,.T.);+#5576 = SURFACE_CURVE('',#5577,(#5581,#5588),.PCURVE_S1.);+#5577 = LINE('',#5578,#5579);+#5578 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.7000001));+#5579 = VECTOR('',#5580,1.);+#5580 = DIRECTION('',(1.,0.,0.));+#5581 = PCURVE('',#5514,#5582);+#5582 = DEFINITIONAL_REPRESENTATION('',(#5583),#5587);+#5583 = LINE('',#5584,#5585);+#5584 = CARTESIAN_POINT('',(2.710159556647E-02,0.470496304427));+#5585 = VECTOR('',#5586,1.);+#5586 = DIRECTION('',(1.,0.));+#5587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5588 = PCURVE('',#5165,#5589);+#5589 = DEFINITIONAL_REPRESENTATION('',(#5590),#5594);+#5590 = LINE('',#5591,#5592);+#5591 = CARTESIAN_POINT('',(0.,-0.1));+#5592 = VECTOR('',#5593,1.);+#5593 = DIRECTION('',(1.,0.));+#5594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5595 = ORIENTED_EDGE('',*,*,#5498,.T.);+#5596 = ORIENTED_EDGE('',*,*,#5597,.T.);+#5597 = EDGE_CURVE('',#5499,#5598,#5600,.T.);+#5598 = VERTEX_POINT('',#5599);+#5599 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.7000001));+#5600 = SURFACE_CURVE('',#5601,(#5605,#5612),.PCURVE_S1.);+#5601 = LINE('',#5602,#5603);+#5602 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.7000001)+ );+#5603 = VECTOR('',#5604,1.);+#5604 = DIRECTION('',(0.510221065095,0.86004329236,0.));+#5605 = PCURVE('',#5514,#5606);+#5606 = DEFINITIONAL_REPRESENTATION('',(#5607),#5611);+#5607 = LINE('',#5608,#5609);+#5608 = CARTESIAN_POINT('',(0.198850079098,0.293075393916));+#5609 = VECTOR('',#5610,1.);+#5610 = DIRECTION('',(0.510221065095,0.86004329236));+#5611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5612 = PCURVE('',#5435,#5613);+#5613 = DEFINITIONAL_REPRESENTATION('',(#5614),#5618);+#5614 = LINE('',#5615,#5616);+#5615 = CARTESIAN_POINT('',(0.,-0.1));+#5616 = VECTOR('',#5617,1.);+#5617 = DIRECTION('',(1.,0.));+#5618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5619 = ORIENTED_EDGE('',*,*,#5620,.T.);+#5620 = EDGE_CURVE('',#5598,#5621,#5623,.T.);+#5621 = VERTEX_POINT('',#5622);+#5622 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.7000001));+#5623 = SURFACE_CURVE('',#5624,(#5628,#5635),.PCURVE_S1.);+#5624 = LINE('',#5625,#5626);+#5625 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.7000001));+#5626 = VECTOR('',#5627,1.);+#5627 = DIRECTION('',(1.,0.,0.));+#5628 = PCURVE('',#5514,#5629);+#5629 = DEFINITIONAL_REPRESENTATION('',(#5630),#5634);+#5630 = LINE('',#5631,#5632);+#5631 = CARTESIAN_POINT('',(0.304105113042,0.470496304427));+#5632 = VECTOR('',#5633,1.);+#5633 = DIRECTION('',(1.,0.));+#5634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5635 = PCURVE('',#5408,#5636);+#5636 = DEFINITIONAL_REPRESENTATION('',(#5637),#5641);+#5637 = LINE('',#5638,#5639);+#5638 = CARTESIAN_POINT('',(0.,-0.1));+#5639 = VECTOR('',#5640,1.);+#5640 = DIRECTION('',(1.,0.));+#5641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5642 = ORIENTED_EDGE('',*,*,#5643,.T.);+#5643 = EDGE_CURVE('',#5621,#5644,#5646,.T.);+#5644 = VERTEX_POINT('',#5645);+#5645 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,1.7000001+ ));+#5646 = SURFACE_CURVE('',#5647,(#5651,#5658),.PCURVE_S1.);+#5647 = LINE('',#5648,#5649);+#5648 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.7000001));+#5649 = VECTOR('',#5650,1.);+#5650 = DIRECTION('',(-0.537108720626,-0.843513024338,0.));+#5651 = PCURVE('',#5514,#5652);+#5652 = DEFINITIONAL_REPRESENTATION('',(#5653),#5657);+#5653 = LINE('',#5654,#5655);+#5654 = CARTESIAN_POINT('',(0.372489371623,0.470496304427));+#5655 = VECTOR('',#5656,1.);+#5656 = DIRECTION('',(-0.537108720626,-0.843513024338));+#5657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5658 = PCURVE('',#5381,#5659);+#5659 = DEFINITIONAL_REPRESENTATION('',(#5660),#5664);+#5660 = LINE('',#5661,#5662);+#5661 = CARTESIAN_POINT('',(-0.,-0.1));+#5662 = VECTOR('',#5663,1.);+#5663 = DIRECTION('',(1.,0.));+#5664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5665 = ORIENTED_EDGE('',*,*,#5666,.T.);+#5666 = EDGE_CURVE('',#5644,#5667,#5669,.T.);+#5667 = VERTEX_POINT('',#5668);+#5668 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.7000001));+#5669 = SURFACE_CURVE('',#5670,(#5674,#5681),.PCURVE_S1.);+#5670 = LINE('',#5671,#5672);+#5671 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,1.7000001+ ));+#5672 = VECTOR('',#5673,1.);+#5673 = DIRECTION('',(0.517990116776,-0.855386602024,0.));+#5674 = PCURVE('',#5514,#5675);+#5675 = DEFINITIONAL_REPRESENTATION('',(#5676),#5680);+#5676 = LINE('',#5677,#5678);+#5677 = CARTESIAN_POINT('',(0.231624101644,0.249271652245));+#5678 = VECTOR('',#5679,1.);+#5679 = DIRECTION('',(0.517990116776,-0.855386602024));+#5680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5681 = PCURVE('',#5354,#5682);+#5682 = DEFINITIONAL_REPRESENTATION('',(#5683),#5687);+#5683 = LINE('',#5684,#5685);+#5684 = CARTESIAN_POINT('',(0.,-0.1));+#5685 = VECTOR('',#5686,1.);+#5686 = DIRECTION('',(1.,0.));+#5687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5688 = ORIENTED_EDGE('',*,*,#5689,.T.);+#5689 = EDGE_CURVE('',#5667,#5690,#5692,.T.);+#5690 = VERTEX_POINT('',#5691);+#5691 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.7000001));+#5692 = SURFACE_CURVE('',#5693,(#5697,#5704),.PCURVE_S1.);+#5693 = LINE('',#5694,#5695);+#5694 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.7000001));+#5695 = VECTOR('',#5696,1.);+#5696 = DIRECTION('',(-1.,0.,0.));+#5697 = PCURVE('',#5514,#5698);+#5698 = DEFINITIONAL_REPRESENTATION('',(#5699),#5703);+#5699 = LINE('',#5700,#5701);+#5700 = CARTESIAN_POINT('',(0.382573686252,0.));+#5701 = VECTOR('',#5702,1.);+#5702 = DIRECTION('',(-1.,0.));+#5703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5704 = PCURVE('',#5327,#5705);+#5705 = DEFINITIONAL_REPRESENTATION('',(#5706),#5710);+#5706 = LINE('',#5707,#5708);+#5707 = CARTESIAN_POINT('',(0.,-0.1));+#5708 = VECTOR('',#5709,1.);+#5709 = DIRECTION('',(1.,0.));+#5710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5711 = ORIENTED_EDGE('',*,*,#5712,.T.);+#5712 = EDGE_CURVE('',#5690,#5713,#5715,.T.);+#5713 = VERTEX_POINT('',#5714);+#5714 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.7000001)+ );+#5715 = SURFACE_CURVE('',#5716,(#5720,#5727),.PCURVE_S1.);+#5716 = LINE('',#5717,#5718);+#5717 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.7000001));+#5718 = VECTOR('',#5719,1.);+#5719 = DIRECTION('',(-0.494682680526,0.869073670978,0.));+#5720 = PCURVE('',#5514,#5721);+#5721 = DEFINITIONAL_REPRESENTATION('',(#5722),#5726);+#5722 = LINE('',#5723,#5724);+#5723 = CARTESIAN_POINT('',(0.314189427672,0.));+#5724 = VECTOR('',#5725,1.);+#5725 = DIRECTION('',(-0.494682680526,0.869073670978));+#5726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5727 = PCURVE('',#5300,#5728);+#5728 = DEFINITIONAL_REPRESENTATION('',(#5729),#5733);+#5729 = LINE('',#5730,#5731);+#5730 = CARTESIAN_POINT('',(0.,-0.1));+#5731 = VECTOR('',#5732,1.);+#5732 = DIRECTION('',(1.,0.));+#5733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5734 = ORIENTED_EDGE('',*,*,#5735,.T.);+#5735 = EDGE_CURVE('',#5713,#5736,#5738,.T.);+#5736 = VERTEX_POINT('',#5737);+#5737 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.7000001));+#5738 = SURFACE_CURVE('',#5739,(#5743,#5750),.PCURVE_S1.);+#5739 = LINE('',#5740,#5741);+#5740 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.7000001)+ );+#5741 = VECTOR('',#5742,1.);+#5742 = DIRECTION('',(-0.523431850076,-0.852067543289,0.));+#5743 = PCURVE('',#5514,#5744);+#5744 = DEFINITIONAL_REPRESENTATION('',(#5745),#5749);+#5745 = LINE('',#5746,#5747);+#5746 = CARTESIAN_POINT('',(0.198850079098,0.202631697084));+#5747 = VECTOR('',#5748,1.);+#5748 = DIRECTION('',(-0.523431850076,-0.852067543289));+#5749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5750 = PCURVE('',#5273,#5751);+#5751 = DEFINITIONAL_REPRESENTATION('',(#5752),#5756);+#5752 = LINE('',#5753,#5754);+#5753 = CARTESIAN_POINT('',(-0.,-0.1));+#5754 = VECTOR('',#5755,1.);+#5755 = DIRECTION('',(1.,0.));+#5756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5757 = ORIENTED_EDGE('',*,*,#5758,.T.);+#5758 = EDGE_CURVE('',#5736,#5759,#5761,.T.);+#5759 = VERTEX_POINT('',#5760);+#5760 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.7000001));+#5761 = SURFACE_CURVE('',#5762,(#5766,#5773),.PCURVE_S1.);+#5762 = LINE('',#5763,#5764);+#5763 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.7000001));+#5764 = VECTOR('',#5765,1.);+#5765 = DIRECTION('',(-1.,0.,0.));+#5766 = PCURVE('',#5514,#5767);+#5767 = DEFINITIONAL_REPRESENTATION('',(#5768),#5772);+#5768 = LINE('',#5769,#5770);+#5769 = CARTESIAN_POINT('',(7.43718203917E-02,0.));+#5770 = VECTOR('',#5771,1.);+#5771 = DIRECTION('',(-1.,0.));+#5772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5773 = PCURVE('',#5246,#5774);+#5774 = DEFINITIONAL_REPRESENTATION('',(#5775),#5779);+#5775 = LINE('',#5776,#5777);+#5776 = CARTESIAN_POINT('',(0.,-0.1));+#5777 = VECTOR('',#5778,1.);+#5778 = DIRECTION('',(1.,0.));+#5779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5780 = ORIENTED_EDGE('',*,*,#5781,.T.);+#5781 = EDGE_CURVE('',#5759,#5551,#5782,.T.);+#5782 = SURFACE_CURVE('',#5783,(#5787,#5794),.PCURVE_S1.);+#5783 = LINE('',#5784,#5785);+#5784 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.7000001));+#5785 = VECTOR('',#5786,1.);+#5786 = DIRECTION('',(0.534314599555,0.845285696497,0.));+#5787 = PCURVE('',#5514,#5788);+#5788 = DEFINITIONAL_REPRESENTATION('',(#5789),#5793);+#5789 = LINE('',#5790,#5791);+#5790 = CARTESIAN_POINT('',(5.672426979028E-03,0.));+#5791 = VECTOR('',#5792,1.);+#5792 = DIRECTION('',(0.534314599555,0.845285696497));+#5793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5794 = PCURVE('',#5219,#5795);+#5795 = DEFINITIONAL_REPRESENTATION('',(#5796),#5800);+#5796 = LINE('',#5797,#5798);+#5797 = CARTESIAN_POINT('',(0.,-0.1));+#5798 = VECTOR('',#5799,1.);+#5799 = DIRECTION('',(1.,0.));+#5800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5801 = ADVANCED_FACE('',(#5802),#5435,.T.);+#5802 = FACE_BOUND('',#5803,.T.);+#5803 = EDGE_LOOP('',(#5804,#5805,#5806,#5807));+#5804 = ORIENTED_EDGE('',*,*,#5419,.T.);+#5805 = ORIENTED_EDGE('',*,*,#5526,.T.);+#5806 = ORIENTED_EDGE('',*,*,#5597,.T.);+#5807 = ORIENTED_EDGE('',*,*,#5808,.F.);+#5808 = EDGE_CURVE('',#5393,#5598,#5809,.T.);+#5809 = SURFACE_CURVE('',#5810,(#5814,#5821),.PCURVE_S1.);+#5810 = LINE('',#5811,#5812);+#5811 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.8000001));+#5812 = VECTOR('',#5813,1.);+#5813 = DIRECTION('',(-0.,-0.,-1.));+#5814 = PCURVE('',#5435,#5815);+#5815 = DEFINITIONAL_REPRESENTATION('',(#5816),#5820);+#5816 = LINE('',#5817,#5818);+#5817 = CARTESIAN_POINT('',(0.206292999535,0.));+#5818 = VECTOR('',#5819,1.);+#5819 = DIRECTION('',(0.,-1.));+#5820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5821 = PCURVE('',#5408,#5822);+#5822 = DEFINITIONAL_REPRESENTATION('',(#5823),#5827);+#5823 = LINE('',#5824,#5825);+#5824 = CARTESIAN_POINT('',(0.,0.));+#5825 = VECTOR('',#5826,1.);+#5826 = DIRECTION('',(0.,-1.));+#5827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5828 = ADVANCED_FACE('',(#5829),#5408,.T.);+#5829 = FACE_BOUND('',#5830,.T.);+#5830 = EDGE_LOOP('',(#5831,#5832,#5833,#5834));+#5831 = ORIENTED_EDGE('',*,*,#5392,.T.);+#5832 = ORIENTED_EDGE('',*,*,#5808,.T.);+#5833 = ORIENTED_EDGE('',*,*,#5620,.T.);+#5834 = ORIENTED_EDGE('',*,*,#5835,.F.);+#5835 = EDGE_CURVE('',#5366,#5621,#5836,.T.);+#5836 = SURFACE_CURVE('',#5837,(#5841,#5848),.PCURVE_S1.);+#5837 = LINE('',#5838,#5839);+#5838 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.8000001));+#5839 = VECTOR('',#5840,1.);+#5840 = DIRECTION('',(-0.,-0.,-1.));+#5841 = PCURVE('',#5408,#5842);+#5842 = DEFINITIONAL_REPRESENTATION('',(#5843),#5847);+#5843 = LINE('',#5844,#5845);+#5844 = CARTESIAN_POINT('',(6.83842585805E-02,0.));+#5845 = VECTOR('',#5846,1.);+#5846 = DIRECTION('',(0.,-1.));+#5847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5848 = PCURVE('',#5381,#5849);+#5849 = DEFINITIONAL_REPRESENTATION('',(#5850),#5854);+#5850 = LINE('',#5851,#5852);+#5851 = CARTESIAN_POINT('',(0.,0.));+#5852 = VECTOR('',#5853,1.);+#5853 = DIRECTION('',(0.,-1.));+#5854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5855 = ADVANCED_FACE('',(#5856),#5381,.T.);+#5856 = FACE_BOUND('',#5857,.T.);+#5857 = EDGE_LOOP('',(#5858,#5859,#5860,#5861));+#5858 = ORIENTED_EDGE('',*,*,#5365,.T.);+#5859 = ORIENTED_EDGE('',*,*,#5835,.T.);+#5860 = ORIENTED_EDGE('',*,*,#5643,.T.);+#5861 = ORIENTED_EDGE('',*,*,#5862,.F.);+#5862 = EDGE_CURVE('',#5339,#5644,#5863,.T.);+#5863 = SURFACE_CURVE('',#5864,(#5868,#5875),.PCURVE_S1.);+#5864 = LINE('',#5865,#5866);+#5865 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,1.8000001+ ));+#5866 = VECTOR('',#5867,1.);+#5867 = DIRECTION('',(-0.,-0.,-1.));+#5868 = PCURVE('',#5381,#5869);+#5869 = DEFINITIONAL_REPRESENTATION('',(#5870),#5874);+#5870 = LINE('',#5871,#5872);+#5871 = CARTESIAN_POINT('',(0.262265840359,0.));+#5872 = VECTOR('',#5873,1.);+#5873 = DIRECTION('',(0.,-1.));+#5874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5875 = PCURVE('',#5354,#5876);+#5876 = DEFINITIONAL_REPRESENTATION('',(#5877),#5881);+#5877 = LINE('',#5878,#5879);+#5878 = CARTESIAN_POINT('',(0.,0.));+#5879 = VECTOR('',#5880,1.);+#5880 = DIRECTION('',(0.,-1.));+#5881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5882 = ADVANCED_FACE('',(#5883),#5354,.T.);+#5883 = FACE_BOUND('',#5884,.T.);+#5884 = EDGE_LOOP('',(#5885,#5886,#5887,#5888));+#5885 = ORIENTED_EDGE('',*,*,#5338,.T.);+#5886 = ORIENTED_EDGE('',*,*,#5862,.T.);+#5887 = ORIENTED_EDGE('',*,*,#5666,.T.);+#5888 = ORIENTED_EDGE('',*,*,#5889,.F.);+#5889 = EDGE_CURVE('',#5312,#5667,#5890,.T.);+#5890 = SURFACE_CURVE('',#5891,(#5895,#5902),.PCURVE_S1.);+#5891 = LINE('',#5892,#5893);+#5892 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.8000001));+#5893 = VECTOR('',#5894,1.);+#5894 = DIRECTION('',(-0.,-0.,-1.));+#5895 = PCURVE('',#5354,#5896);+#5896 = DEFINITIONAL_REPRESENTATION('',(#5897),#5901);+#5897 = LINE('',#5898,#5899);+#5898 = CARTESIAN_POINT('',(0.291414024554,0.));+#5899 = VECTOR('',#5900,1.);+#5900 = DIRECTION('',(0.,-1.));+#5901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5902 = PCURVE('',#5327,#5903);+#5903 = DEFINITIONAL_REPRESENTATION('',(#5904),#5908);+#5904 = LINE('',#5905,#5906);+#5905 = CARTESIAN_POINT('',(0.,0.));+#5906 = VECTOR('',#5907,1.);+#5907 = DIRECTION('',(0.,-1.));+#5908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5909 = ADVANCED_FACE('',(#5910),#5327,.T.);+#5910 = FACE_BOUND('',#5911,.T.);+#5911 = EDGE_LOOP('',(#5912,#5913,#5914,#5915));+#5912 = ORIENTED_EDGE('',*,*,#5311,.T.);+#5913 = ORIENTED_EDGE('',*,*,#5889,.T.);+#5914 = ORIENTED_EDGE('',*,*,#5689,.T.);+#5915 = ORIENTED_EDGE('',*,*,#5916,.F.);+#5916 = EDGE_CURVE('',#5285,#5690,#5917,.T.);+#5917 = SURFACE_CURVE('',#5918,(#5922,#5929),.PCURVE_S1.);+#5918 = LINE('',#5919,#5920);+#5919 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.8000001));+#5920 = VECTOR('',#5921,1.);+#5921 = DIRECTION('',(-0.,-0.,-1.));+#5922 = PCURVE('',#5327,#5923);+#5923 = DEFINITIONAL_REPRESENTATION('',(#5924),#5928);+#5924 = LINE('',#5925,#5926);+#5925 = CARTESIAN_POINT('',(6.83842585805E-02,0.));+#5926 = VECTOR('',#5927,1.);+#5927 = DIRECTION('',(0.,-1.));+#5928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5929 = PCURVE('',#5300,#5930);+#5930 = DEFINITIONAL_REPRESENTATION('',(#5931),#5935);+#5931 = LINE('',#5932,#5933);+#5932 = CARTESIAN_POINT('',(0.,0.));+#5933 = VECTOR('',#5934,1.);+#5934 = DIRECTION('',(0.,-1.));+#5935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5936 = ADVANCED_FACE('',(#5937),#5300,.T.);+#5937 = FACE_BOUND('',#5938,.T.);+#5938 = EDGE_LOOP('',(#5939,#5940,#5941,#5942));+#5939 = ORIENTED_EDGE('',*,*,#5284,.T.);+#5940 = ORIENTED_EDGE('',*,*,#5916,.T.);+#5941 = ORIENTED_EDGE('',*,*,#5712,.T.);+#5942 = ORIENTED_EDGE('',*,*,#5943,.F.);+#5943 = EDGE_CURVE('',#5258,#5713,#5944,.T.);+#5944 = SURFACE_CURVE('',#5945,(#5949,#5956),.PCURVE_S1.);+#5945 = LINE('',#5946,#5947);+#5946 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.8000001)+ );+#5947 = VECTOR('',#5948,1.);+#5948 = DIRECTION('',(-0.,-0.,-1.));+#5949 = PCURVE('',#5300,#5950);+#5950 = DEFINITIONAL_REPRESENTATION('',(#5951),#5955);+#5951 = LINE('',#5952,#5953);+#5952 = CARTESIAN_POINT('',(0.233158250964,0.));+#5953 = VECTOR('',#5954,1.);+#5954 = DIRECTION('',(0.,-1.));+#5955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5956 = PCURVE('',#5273,#5957);+#5957 = DEFINITIONAL_REPRESENTATION('',(#5958),#5962);+#5958 = LINE('',#5959,#5960);+#5959 = CARTESIAN_POINT('',(-1.773721884553E-17,0.));+#5960 = VECTOR('',#5961,1.);+#5961 = DIRECTION('',(0.,-1.));+#5962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5963 = ADVANCED_FACE('',(#5964),#5273,.T.);+#5964 = FACE_BOUND('',#5965,.T.);+#5965 = EDGE_LOOP('',(#5966,#5967,#5968,#5969));+#5966 = ORIENTED_EDGE('',*,*,#5257,.T.);+#5967 = ORIENTED_EDGE('',*,*,#5943,.T.);+#5968 = ORIENTED_EDGE('',*,*,#5735,.T.);+#5969 = ORIENTED_EDGE('',*,*,#5970,.F.);+#5970 = EDGE_CURVE('',#5231,#5736,#5971,.T.);+#5971 = SURFACE_CURVE('',#5972,(#5976,#5983),.PCURVE_S1.);+#5972 = LINE('',#5973,#5974);+#5973 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.8000001));+#5974 = VECTOR('',#5975,1.);+#5975 = DIRECTION('',(-0.,-0.,-1.));+#5976 = PCURVE('',#5273,#5977);+#5977 = DEFINITIONAL_REPRESENTATION('',(#5978),#5982);+#5978 = LINE('',#5979,#5980);+#5979 = CARTESIAN_POINT('',(0.237811777576,0.));+#5980 = VECTOR('',#5981,1.);+#5981 = DIRECTION('',(0.,-1.));+#5982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5983 = PCURVE('',#5246,#5984);+#5984 = DEFINITIONAL_REPRESENTATION('',(#5985),#5989);+#5985 = LINE('',#5986,#5987);+#5986 = CARTESIAN_POINT('',(0.,0.));+#5987 = VECTOR('',#5988,1.);+#5988 = DIRECTION('',(0.,-1.));+#5989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5990 = ADVANCED_FACE('',(#5991),#5246,.T.);+#5991 = FACE_BOUND('',#5992,.T.);+#5992 = EDGE_LOOP('',(#5993,#5994,#5995,#5996));+#5993 = ORIENTED_EDGE('',*,*,#5230,.T.);+#5994 = ORIENTED_EDGE('',*,*,#5970,.T.);+#5995 = ORIENTED_EDGE('',*,*,#5758,.T.);+#5996 = ORIENTED_EDGE('',*,*,#5997,.F.);+#5997 = EDGE_CURVE('',#5204,#5759,#5998,.T.);+#5998 = SURFACE_CURVE('',#5999,(#6003,#6010),.PCURVE_S1.);+#5999 = LINE('',#6000,#6001);+#6000 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.8000001));+#6001 = VECTOR('',#6002,1.);+#6002 = DIRECTION('',(-0.,-0.,-1.));+#6003 = PCURVE('',#5246,#6004);+#6004 = DEFINITIONAL_REPRESENTATION('',(#6005),#6009);+#6005 = LINE('',#6006,#6007);+#6006 = CARTESIAN_POINT('',(6.869939341267E-02,0.));+#6007 = VECTOR('',#6008,1.);+#6008 = DIRECTION('',(0.,-1.));+#6009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6010 = PCURVE('',#5219,#6011);+#6011 = DEFINITIONAL_REPRESENTATION('',(#6012),#6016);+#6012 = LINE('',#6013,#6014);+#6013 = CARTESIAN_POINT('',(0.,0.));+#6014 = VECTOR('',#6015,1.);+#6015 = DIRECTION('',(0.,-1.));+#6016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6017 = ADVANCED_FACE('',(#6018),#5219,.T.);+#6018 = FACE_BOUND('',#6019,.T.);+#6019 = EDGE_LOOP('',(#6020,#6021,#6022,#6023));+#6020 = ORIENTED_EDGE('',*,*,#5203,.T.);+#6021 = ORIENTED_EDGE('',*,*,#5997,.T.);+#6022 = ORIENTED_EDGE('',*,*,#5781,.T.);+#6023 = ORIENTED_EDGE('',*,*,#6024,.F.);+#6024 = EDGE_CURVE('',#5177,#5551,#6025,.T.);+#6025 = SURFACE_CURVE('',#6026,(#6030,#6037),.PCURVE_S1.);+#6026 = LINE('',#6027,#6028);+#6027 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,1.8000001+ ));+#6028 = VECTOR('',#6029,1.);+#6029 = DIRECTION('',(-0.,-0.,-1.));+#6030 = PCURVE('',#5219,#6031);+#6031 = DEFINITIONAL_REPRESENTATION('',(#6032),#6036);+#6032 = LINE('',#6033,#6034);+#6033 = CARTESIAN_POINT('',(0.294896333013,0.));+#6034 = VECTOR('',#6035,1.);+#6035 = DIRECTION('',(0.,-1.));+#6036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6037 = PCURVE('',#5192,#6038);+#6038 = DEFINITIONAL_REPRESENTATION('',(#6039),#6043);+#6039 = LINE('',#6040,#6041);+#6040 = CARTESIAN_POINT('',(0.,0.));+#6041 = VECTOR('',#6042,1.);+#6042 = DIRECTION('',(0.,-1.));+#6043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6044 = ADVANCED_FACE('',(#6045),#5192,.T.);+#6045 = FACE_BOUND('',#6046,.T.);+#6046 = EDGE_LOOP('',(#6047,#6048,#6049,#6050));+#6047 = ORIENTED_EDGE('',*,*,#5176,.T.);+#6048 = ORIENTED_EDGE('',*,*,#6024,.T.);+#6049 = ORIENTED_EDGE('',*,*,#5550,.T.);+#6050 = ORIENTED_EDGE('',*,*,#6051,.F.);+#6051 = EDGE_CURVE('',#5150,#5553,#6052,.T.);+#6052 = SURFACE_CURVE('',#6053,(#6057,#6064),.PCURVE_S1.);+#6053 = LINE('',#6054,#6055);+#6054 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.8000001));+#6055 = VECTOR('',#6056,1.);+#6056 = DIRECTION('',(-0.,-0.,-1.));+#6057 = PCURVE('',#5192,#6058);+#6058 = DEFINITIONAL_REPRESENTATION('',(#6059),#6063);+#6059 = LINE('',#6060,#6061);+#6060 = CARTESIAN_POINT('',(0.259757519938,0.));+#6061 = VECTOR('',#6062,1.);+#6062 = DIRECTION('',(0.,-1.));+#6063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6064 = PCURVE('',#5165,#6065);+#6065 = DEFINITIONAL_REPRESENTATION('',(#6066),#6070);+#6066 = LINE('',#6067,#6068);+#6067 = CARTESIAN_POINT('',(0.,0.));+#6068 = VECTOR('',#6069,1.);+#6069 = DIRECTION('',(0.,-1.));+#6070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6071 = ADVANCED_FACE('',(#6072),#5165,.T.);+#6072 = FACE_BOUND('',#6073,.T.);+#6073 = EDGE_LOOP('',(#6074,#6075,#6076,#6077));+#6074 = ORIENTED_EDGE('',*,*,#5147,.T.);+#6075 = ORIENTED_EDGE('',*,*,#6051,.T.);+#6076 = ORIENTED_EDGE('',*,*,#5575,.T.);+#6077 = ORIENTED_EDGE('',*,*,#5475,.F.);+#6078 = ADVANCED_FACE('',(#6079),#5134,.T.);+#6079 = FACE_BOUND('',#6080,.T.);+#6080 = EDGE_LOOP('',(#6081,#6082,#6105,#6133));+#6081 = ORIENTED_EDGE('',*,*,#5120,.T.);+#6082 = ORIENTED_EDGE('',*,*,#6083,.T.);+#6083 = EDGE_CURVE('',#4984,#6084,#6086,.T.);+#6084 = VERTEX_POINT('',#6085);+#6085 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.7000001));+#6086 = SURFACE_CURVE('',#6087,(#6091,#6098),.PCURVE_S1.);+#6087 = LINE('',#6088,#6089);+#6088 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.8000001));+#6089 = VECTOR('',#6090,1.);+#6090 = DIRECTION('',(-0.,-0.,-1.));+#6091 = PCURVE('',#5134,#6092);+#6092 = DEFINITIONAL_REPRESENTATION('',(#6093),#6097);+#6093 = LINE('',#6094,#6095);+#6094 = CARTESIAN_POINT('',(0.,0.));+#6095 = VECTOR('',#6096,1.);+#6096 = DIRECTION('',(0.,-1.));+#6097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6098 = PCURVE('',#5001,#6099);+#6099 = DEFINITIONAL_REPRESENTATION('',(#6100),#6104);+#6100 = LINE('',#6101,#6102);+#6101 = CARTESIAN_POINT('',(6.397237093015E-02,0.));+#6102 = VECTOR('',#6103,1.);+#6103 = DIRECTION('',(0.,-1.));+#6104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6105 = ORIENTED_EDGE('',*,*,#6106,.T.);+#6106 = EDGE_CURVE('',#6084,#6107,#6109,.T.);+#6107 = VERTEX_POINT('',#6108);+#6108 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.7000001));+#6109 = SURFACE_CURVE('',#6110,(#6114,#6121),.PCURVE_S1.);+#6110 = LINE('',#6111,#6112);+#6111 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.7000001));+#6112 = VECTOR('',#6113,1.);+#6113 = DIRECTION('',(0.,-1.,0.));+#6114 = PCURVE('',#5134,#6115);+#6115 = DEFINITIONAL_REPRESENTATION('',(#6116),#6120);+#6116 = LINE('',#6117,#6118);+#6117 = CARTESIAN_POINT('',(0.,-0.1));+#6118 = VECTOR('',#6119,1.);+#6119 = DIRECTION('',(1.,0.));+#6120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6121 = PCURVE('',#6122,#6127);+#6122 = PLANE('',#6123);+#6123 = AXIS2_PLACEMENT_3D('',#6124,#6125,#6126);+#6124 = CARTESIAN_POINT('',(-0.582841872095,-0.223430596007,1.7000001));+#6125 = DIRECTION('',(0.,0.,1.));+#6126 = DIRECTION('',(1.,0.,0.));+#6127 = DEFINITIONAL_REPRESENTATION('',(#6128),#6132);+#6128 = LINE('',#6129,#6130);+#6129 = CARTESIAN_POINT('',(0.131726359846,0.470496304427));+#6130 = VECTOR('',#6131,1.);+#6131 = DIRECTION('',(0.,-1.));+#6132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6133 = ORIENTED_EDGE('',*,*,#6134,.F.);+#6134 = EDGE_CURVE('',#5094,#6107,#6135,.T.);+#6135 = SURFACE_CURVE('',#6136,(#6140,#6147),.PCURVE_S1.);+#6136 = LINE('',#6137,#6138);+#6137 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.8000001));+#6138 = VECTOR('',#6139,1.);+#6139 = DIRECTION('',(-0.,-0.,-1.));+#6140 = PCURVE('',#5134,#6141);+#6141 = DEFINITIONAL_REPRESENTATION('',(#6142),#6146);+#6142 = LINE('',#6143,#6144);+#6143 = CARTESIAN_POINT('',(0.416923382959,0.));+#6144 = VECTOR('',#6145,1.);+#6145 = DIRECTION('',(0.,-1.));+#6146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6147 = PCURVE('',#5109,#6148);+#6148 = DEFINITIONAL_REPRESENTATION('',(#6149),#6153);+#6149 = LINE('',#6150,#6151);+#6150 = CARTESIAN_POINT('',(0.,0.));+#6151 = VECTOR('',#6152,1.);+#6152 = DIRECTION('',(0.,-1.));+#6153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6154 = ADVANCED_FACE('',(#6155),#6122,.T.);+#6155 = FACE_BOUND('',#6156,.F.);+#6156 = EDGE_LOOP('',(#6157,#6182,#6203,#6204,#6227,#6250));+#6157 = ORIENTED_EDGE('',*,*,#6158,.T.);+#6158 = EDGE_CURVE('',#6159,#6161,#6163,.T.);+#6159 = VERTEX_POINT('',#6160);+#6160 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.7000001));+#6161 = VERTEX_POINT('',#6162);+#6162 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.7000001));+#6163 = SURFACE_CURVE('',#6164,(#6168,#6175),.PCURVE_S1.);+#6164 = LINE('',#6165,#6166);+#6165 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.7000001));+#6166 = VECTOR('',#6167,1.);+#6167 = DIRECTION('',(0.,1.,0.));+#6168 = PCURVE('',#6122,#6169);+#6169 = DEFINITIONAL_REPRESENTATION('',(#6170),#6174);+#6170 = LINE('',#6171,#6172);+#6171 = CARTESIAN_POINT('',(6.775398891617E-02,0.));+#6172 = VECTOR('',#6173,1.);+#6173 = DIRECTION('',(0.,1.));+#6174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6175 = PCURVE('',#5028,#6176);+#6176 = DEFINITIONAL_REPRESENTATION('',(#6177),#6181);+#6177 = LINE('',#6178,#6179);+#6178 = CARTESIAN_POINT('',(0.,-0.1));+#6179 = VECTOR('',#6180,1.);+#6180 = DIRECTION('',(1.,0.));+#6181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6182 = ORIENTED_EDGE('',*,*,#6183,.T.);+#6183 = EDGE_CURVE('',#6161,#6084,#6184,.T.);+#6184 = SURFACE_CURVE('',#6185,(#6189,#6196),.PCURVE_S1.);+#6185 = LINE('',#6186,#6187);+#6186 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.7000001));+#6187 = VECTOR('',#6188,1.);+#6188 = DIRECTION('',(1.,0.,0.));+#6189 = PCURVE('',#6122,#6190);+#6190 = DEFINITIONAL_REPRESENTATION('',(#6191),#6195);+#6191 = LINE('',#6192,#6193);+#6192 = CARTESIAN_POINT('',(6.775398891617E-02,0.470496304427));+#6193 = VECTOR('',#6194,1.);+#6194 = DIRECTION('',(1.,0.));+#6195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6196 = PCURVE('',#5001,#6197);+#6197 = DEFINITIONAL_REPRESENTATION('',(#6198),#6202);+#6198 = LINE('',#6199,#6200);+#6199 = CARTESIAN_POINT('',(0.,-0.1));+#6200 = VECTOR('',#6201,1.);+#6201 = DIRECTION('',(1.,0.));+#6202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6203 = ORIENTED_EDGE('',*,*,#6106,.T.);+#6204 = ORIENTED_EDGE('',*,*,#6205,.T.);+#6205 = EDGE_CURVE('',#6107,#6206,#6208,.T.);+#6206 = VERTEX_POINT('',#6207);+#6207 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.7000001));+#6208 = SURFACE_CURVE('',#6209,(#6213,#6220),.PCURVE_S1.);+#6209 = LINE('',#6210,#6211);+#6210 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.7000001));+#6211 = VECTOR('',#6212,1.);+#6212 = DIRECTION('',(1.,0.,0.));+#6213 = PCURVE('',#6122,#6214);+#6214 = DEFINITIONAL_REPRESENTATION('',(#6215),#6219);+#6215 = LINE('',#6216,#6217);+#6216 = CARTESIAN_POINT('',(0.131726359846,5.35729214686E-02));+#6217 = VECTOR('',#6218,1.);+#6218 = DIRECTION('',(1.,0.));+#6219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6220 = PCURVE('',#5109,#6221);+#6221 = DEFINITIONAL_REPRESENTATION('',(#6222),#6226);+#6222 = LINE('',#6223,#6224);+#6223 = CARTESIAN_POINT('',(0.,-0.1));+#6224 = VECTOR('',#6225,1.);+#6225 = DIRECTION('',(1.,0.));+#6226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6227 = ORIENTED_EDGE('',*,*,#6228,.T.);+#6228 = EDGE_CURVE('',#6206,#6229,#6231,.T.);+#6229 = VERTEX_POINT('',#6230);+#6230 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.7000001));+#6231 = SURFACE_CURVE('',#6232,(#6236,#6243),.PCURVE_S1.);+#6232 = LINE('',#6233,#6234);+#6233 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.7000001));+#6234 = VECTOR('',#6235,1.);+#6235 = DIRECTION('',(0.,-1.,0.));+#6236 = PCURVE('',#6122,#6237);+#6237 = DEFINITIONAL_REPRESENTATION('',(#6238),#6242);+#6238 = LINE('',#6239,#6240);+#6239 = CARTESIAN_POINT('',(0.35893857384,5.35729214686E-02));+#6240 = VECTOR('',#6241,1.);+#6241 = DIRECTION('',(0.,-1.));+#6242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6243 = PCURVE('',#5082,#6244);+#6244 = DEFINITIONAL_REPRESENTATION('',(#6245),#6249);+#6245 = LINE('',#6246,#6247);+#6246 = CARTESIAN_POINT('',(0.,-0.1));+#6247 = VECTOR('',#6248,1.);+#6248 = DIRECTION('',(1.,0.));+#6249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6250 = ORIENTED_EDGE('',*,*,#6251,.T.);+#6251 = EDGE_CURVE('',#6229,#6159,#6252,.T.);+#6252 = SURFACE_CURVE('',#6253,(#6257,#6264),.PCURVE_S1.);+#6253 = LINE('',#6254,#6255);+#6254 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.7000001));+#6255 = VECTOR('',#6256,1.);+#6256 = DIRECTION('',(-1.,0.,0.));+#6257 = PCURVE('',#6122,#6258);+#6258 = DEFINITIONAL_REPRESENTATION('',(#6259),#6263);+#6259 = LINE('',#6260,#6261);+#6260 = CARTESIAN_POINT('',(0.35893857384,0.));+#6261 = VECTOR('',#6262,1.);+#6262 = DIRECTION('',(-1.,0.));+#6263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6264 = PCURVE('',#5055,#6265);+#6265 = DEFINITIONAL_REPRESENTATION('',(#6266),#6270);+#6266 = LINE('',#6267,#6268);+#6267 = CARTESIAN_POINT('',(0.,-0.1));+#6268 = VECTOR('',#6269,1.);+#6269 = DIRECTION('',(1.,0.));+#6270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6271 = ADVANCED_FACE('',(#6272),#5109,.T.);+#6272 = FACE_BOUND('',#6273,.T.);+#6273 = EDGE_LOOP('',(#6274,#6275,#6276,#6277));+#6274 = ORIENTED_EDGE('',*,*,#5093,.T.);+#6275 = ORIENTED_EDGE('',*,*,#6134,.T.);+#6276 = ORIENTED_EDGE('',*,*,#6205,.T.);+#6277 = ORIENTED_EDGE('',*,*,#6278,.F.);+#6278 = EDGE_CURVE('',#5067,#6206,#6279,.T.);+#6279 = SURFACE_CURVE('',#6280,(#6284,#6291),.PCURVE_S1.);+#6280 = LINE('',#6281,#6282);+#6281 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.8000001));+#6282 = VECTOR('',#6283,1.);+#6283 = DIRECTION('',(-0.,-0.,-1.));+#6284 = PCURVE('',#5109,#6285);+#6285 = DEFINITIONAL_REPRESENTATION('',(#6286),#6290);+#6286 = LINE('',#6287,#6288);+#6287 = CARTESIAN_POINT('',(0.227212213993,0.));+#6288 = VECTOR('',#6289,1.);+#6289 = DIRECTION('',(0.,-1.));+#6290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6291 = PCURVE('',#5082,#6292);+#6292 = DEFINITIONAL_REPRESENTATION('',(#6293),#6297);+#6293 = LINE('',#6294,#6295);+#6294 = CARTESIAN_POINT('',(0.,0.));+#6295 = VECTOR('',#6296,1.);+#6296 = DIRECTION('',(0.,-1.));+#6297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6298 = ADVANCED_FACE('',(#6299),#5082,.T.);+#6299 = FACE_BOUND('',#6300,.T.);+#6300 = EDGE_LOOP('',(#6301,#6302,#6303,#6304));+#6301 = ORIENTED_EDGE('',*,*,#5066,.T.);+#6302 = ORIENTED_EDGE('',*,*,#6278,.T.);+#6303 = ORIENTED_EDGE('',*,*,#6228,.T.);+#6304 = ORIENTED_EDGE('',*,*,#6305,.F.);+#6305 = EDGE_CURVE('',#5040,#6229,#6306,.T.);+#6306 = SURFACE_CURVE('',#6307,(#6311,#6318),.PCURVE_S1.);+#6307 = LINE('',#6308,#6309);+#6308 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.8000001));+#6309 = VECTOR('',#6310,1.);+#6310 = DIRECTION('',(-0.,-0.,-1.));+#6311 = PCURVE('',#5082,#6312);+#6312 = DEFINITIONAL_REPRESENTATION('',(#6313),#6317);+#6313 = LINE('',#6314,#6315);+#6314 = CARTESIAN_POINT('',(5.35729214686E-02,0.));+#6315 = VECTOR('',#6316,1.);+#6316 = DIRECTION('',(0.,-1.));+#6317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6318 = PCURVE('',#5055,#6319);+#6319 = DEFINITIONAL_REPRESENTATION('',(#6320),#6324);+#6320 = LINE('',#6321,#6322);+#6321 = CARTESIAN_POINT('',(0.,0.));+#6322 = VECTOR('',#6323,1.);+#6323 = DIRECTION('',(0.,-1.));+#6324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6325 = ADVANCED_FACE('',(#6326),#5055,.T.);+#6326 = FACE_BOUND('',#6327,.T.);+#6327 = EDGE_LOOP('',(#6328,#6329,#6330,#6331));+#6328 = ORIENTED_EDGE('',*,*,#5039,.T.);+#6329 = ORIENTED_EDGE('',*,*,#6305,.T.);+#6330 = ORIENTED_EDGE('',*,*,#6251,.T.);+#6331 = ORIENTED_EDGE('',*,*,#6332,.F.);+#6332 = EDGE_CURVE('',#5013,#6159,#6333,.T.);+#6333 = SURFACE_CURVE('',#6334,(#6338,#6345),.PCURVE_S1.);+#6334 = LINE('',#6335,#6336);+#6335 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.8000001));+#6336 = VECTOR('',#6337,1.);+#6337 = DIRECTION('',(-0.,-0.,-1.));+#6338 = PCURVE('',#5055,#6339);+#6339 = DEFINITIONAL_REPRESENTATION('',(#6340),#6344);+#6340 = LINE('',#6341,#6342);+#6341 = CARTESIAN_POINT('',(0.291184584923,0.));+#6342 = VECTOR('',#6343,1.);+#6343 = DIRECTION('',(0.,-1.));+#6344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6345 = PCURVE('',#5028,#6346);+#6346 = DEFINITIONAL_REPRESENTATION('',(#6347),#6351);+#6347 = LINE('',#6348,#6349);+#6348 = CARTESIAN_POINT('',(0.,0.));+#6349 = VECTOR('',#6350,1.);+#6350 = DIRECTION('',(0.,-1.));+#6351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6352 = ADVANCED_FACE('',(#6353),#5028,.T.);+#6353 = FACE_BOUND('',#6354,.T.);+#6354 = EDGE_LOOP('',(#6355,#6356,#6357,#6358));+#6355 = ORIENTED_EDGE('',*,*,#5012,.T.);+#6356 = ORIENTED_EDGE('',*,*,#6332,.T.);+#6357 = ORIENTED_EDGE('',*,*,#6158,.T.);+#6358 = ORIENTED_EDGE('',*,*,#6359,.F.);+#6359 = EDGE_CURVE('',#4986,#6161,#6360,.T.);+#6360 = SURFACE_CURVE('',#6361,(#6365,#6372),.PCURVE_S1.);+#6361 = LINE('',#6362,#6363);+#6362 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.8000001));+#6363 = VECTOR('',#6364,1.);+#6364 = DIRECTION('',(-0.,-0.,-1.));+#6365 = PCURVE('',#5028,#6366);+#6366 = DEFINITIONAL_REPRESENTATION('',(#6367),#6371);+#6367 = LINE('',#6368,#6369);+#6368 = CARTESIAN_POINT('',(0.470496304427,0.));+#6369 = VECTOR('',#6370,1.);+#6370 = DIRECTION('',(0.,-1.));+#6371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6372 = PCURVE('',#5001,#6373);+#6373 = DEFINITIONAL_REPRESENTATION('',(#6374),#6378);+#6374 = LINE('',#6375,#6376);+#6375 = CARTESIAN_POINT('',(0.,0.));+#6376 = VECTOR('',#6377,1.);+#6377 = DIRECTION('',(0.,-1.));+#6378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6379 = ADVANCED_FACE('',(#6380),#5001,.T.);+#6380 = FACE_BOUND('',#6381,.T.);+#6381 = EDGE_LOOP('',(#6382,#6383,#6384,#6385));+#6382 = ORIENTED_EDGE('',*,*,#4983,.T.);+#6383 = ORIENTED_EDGE('',*,*,#6359,.T.);+#6384 = ORIENTED_EDGE('',*,*,#6183,.T.);+#6385 = ORIENTED_EDGE('',*,*,#6083,.F.);+#6386 = ADVANCED_FACE('',(#6387),#4970,.T.);+#6387 = FACE_BOUND('',#6388,.T.);+#6388 = EDGE_LOOP('',(#6389,#6390,#6413,#6441));+#6389 = ORIENTED_EDGE('',*,*,#4956,.T.);+#6390 = ORIENTED_EDGE('',*,*,#6391,.T.);+#6391 = EDGE_CURVE('',#4199,#6392,#6394,.T.);+#6392 = VERTEX_POINT('',#6393);+#6393 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.7000001));+#6394 = SURFACE_CURVE('',#6395,(#6399,#6406),.PCURVE_S1.);+#6395 = LINE('',#6396,#6397);+#6396 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.8000001));+#6397 = VECTOR('',#6398,1.);+#6398 = DIRECTION('',(-0.,-0.,-1.));+#6399 = PCURVE('',#4970,#6400);+#6400 = DEFINITIONAL_REPRESENTATION('',(#6401),#6405);+#6401 = LINE('',#6402,#6403);+#6402 = CARTESIAN_POINT('',(0.,0.));+#6403 = VECTOR('',#6404,1.);+#6404 = DIRECTION('',(0.,-1.));+#6405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6406 = PCURVE('',#4216,#6407);+#6407 = DEFINITIONAL_REPRESENTATION('',(#6408),#6412);+#6408 = LINE('',#6409,#6410);+#6409 = CARTESIAN_POINT('',(0.238241933119,0.));+#6410 = VECTOR('',#6411,1.);+#6411 = DIRECTION('',(0.,-1.));+#6412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6413 = ORIENTED_EDGE('',*,*,#6414,.T.);+#6414 = EDGE_CURVE('',#6392,#6415,#6417,.T.);+#6415 = VERTEX_POINT('',#6416);+#6416 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.7000001));+#6417 = SURFACE_CURVE('',#6418,(#6422,#6429),.PCURVE_S1.);+#6418 = LINE('',#6419,#6420);+#6419 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.7000001));+#6420 = VECTOR('',#6421,1.);+#6421 = DIRECTION('',(0.,-1.,0.));+#6422 = PCURVE('',#4970,#6423);+#6423 = DEFINITIONAL_REPRESENTATION('',(#6424),#6428);+#6424 = LINE('',#6425,#6426);+#6425 = CARTESIAN_POINT('',(0.,-0.1));+#6426 = VECTOR('',#6427,1.);+#6427 = DIRECTION('',(1.,0.));+#6428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6429 = PCURVE('',#6430,#6435);+#6430 = PLANE('',#6431);+#6431 = AXIS2_PLACEMENT_3D('',#6432,#6433,#6434);+#6432 = CARTESIAN_POINT('',(-0.194280624032,-0.223430596007,1.7000001));+#6433 = DIRECTION('',(0.,0.,1.));+#6434 = DIRECTION('',(1.,0.,0.));+#6435 = DEFINITIONAL_REPRESENTATION('',(#6436),#6440);+#6436 = LINE('',#6437,#6438);+#6437 = CARTESIAN_POINT('',(0.303474843378,0.470496304427));+#6438 = VECTOR('',#6439,1.);+#6439 = DIRECTION('',(0.,-1.));+#6440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6441 = ORIENTED_EDGE('',*,*,#6442,.F.);+#6442 = EDGE_CURVE('',#4930,#6415,#6443,.T.);+#6443 = SURFACE_CURVE('',#6444,(#6448,#6455),.PCURVE_S1.);+#6444 = LINE('',#6445,#6446);+#6445 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.8000001));+#6446 = VECTOR('',#6447,1.);+#6447 = DIRECTION('',(-0.,-0.,-1.));+#6448 = PCURVE('',#4970,#6449);+#6449 = DEFINITIONAL_REPRESENTATION('',(#6450),#6454);+#6450 = LINE('',#6451,#6452);+#6451 = CARTESIAN_POINT('',(5.35729214686E-02,0.));+#6452 = VECTOR('',#6453,1.);+#6453 = DIRECTION('',(0.,-1.));+#6454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6455 = PCURVE('',#4945,#6456);+#6456 = DEFINITIONAL_REPRESENTATION('',(#6457),#6461);+#6457 = LINE('',#6458,#6459);+#6458 = CARTESIAN_POINT('',(0.,0.));+#6459 = VECTOR('',#6460,1.);+#6460 = DIRECTION('',(0.,-1.));+#6461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6462 = ADVANCED_FACE('',(#6463),#6430,.T.);+#6463 = FACE_BOUND('',#6464,.F.);+#6464 = EDGE_LOOP('',(#6465,#6490,#6511,#6512,#6535,#6558,#6581,#6604,+ #6627,#6650,#6673,#6696,#6719,#6742,#6765,#6788,#6811,#6834,#6857,+ #6880,#6903,#6926));+#6465 = ORIENTED_EDGE('',*,*,#6466,.T.);+#6466 = EDGE_CURVE('',#6467,#6469,#6471,.T.);+#6467 = VERTEX_POINT('',#6468);+#6468 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,1.7000001+ ));+#6469 = VERTEX_POINT('',#6470);+#6470 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.7000001));+#6471 = SURFACE_CURVE('',#6472,(#6476,#6483),.PCURVE_S1.);+#6472 = LINE('',#6473,#6474);+#6473 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,1.7000001+ ));+#6474 = VECTOR('',#6475,1.);+#6475 = DIRECTION('',(0.,1.,0.));+#6476 = PCURVE('',#6430,#6477);+#6477 = DEFINITIONAL_REPRESENTATION('',(#6478),#6482);+#6478 = LINE('',#6479,#6480);+#6479 = CARTESIAN_POINT('',(6.523291025882E-02,0.234145180301));+#6480 = VECTOR('',#6481,1.);+#6481 = DIRECTION('',(0.,1.));+#6482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6483 = PCURVE('',#4243,#6484);+#6484 = DEFINITIONAL_REPRESENTATION('',(#6485),#6489);+#6485 = LINE('',#6486,#6487);+#6486 = CARTESIAN_POINT('',(0.,-0.1));+#6487 = VECTOR('',#6488,1.);+#6488 = DIRECTION('',(1.,0.));+#6489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6490 = ORIENTED_EDGE('',*,*,#6491,.T.);+#6491 = EDGE_CURVE('',#6469,#6392,#6492,.T.);+#6492 = SURFACE_CURVE('',#6493,(#6497,#6504),.PCURVE_S1.);+#6493 = LINE('',#6494,#6495);+#6494 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.7000001));+#6495 = VECTOR('',#6496,1.);+#6496 = DIRECTION('',(1.,0.,0.));+#6497 = PCURVE('',#6430,#6498);+#6498 = DEFINITIONAL_REPRESENTATION('',(#6499),#6503);+#6499 = LINE('',#6500,#6501);+#6500 = CARTESIAN_POINT('',(6.523291025882E-02,0.470496304427));+#6501 = VECTOR('',#6502,1.);+#6502 = DIRECTION('',(1.,0.));+#6503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6504 = PCURVE('',#4216,#6505);+#6505 = DEFINITIONAL_REPRESENTATION('',(#6506),#6510);+#6506 = LINE('',#6507,#6508);+#6507 = CARTESIAN_POINT('',(0.,-0.1));+#6508 = VECTOR('',#6509,1.);+#6509 = DIRECTION('',(1.,0.));+#6510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6511 = ORIENTED_EDGE('',*,*,#6414,.T.);+#6512 = ORIENTED_EDGE('',*,*,#6513,.T.);+#6513 = EDGE_CURVE('',#6415,#6514,#6516,.T.);+#6514 = VERTEX_POINT('',#6515);+#6515 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,1.7000001+ ));+#6516 = SURFACE_CURVE('',#6517,(#6521,#6528),.PCURVE_S1.);+#6517 = LINE('',#6518,#6519);+#6518 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.7000001));+#6519 = VECTOR('',#6520,1.);+#6520 = DIRECTION('',(-1.,0.,0.));+#6521 = PCURVE('',#6430,#6522);+#6522 = DEFINITIONAL_REPRESENTATION('',(#6523),#6527);+#6523 = LINE('',#6524,#6525);+#6524 = CARTESIAN_POINT('',(0.303474843378,0.416923382959));+#6525 = VECTOR('',#6526,1.);+#6526 = DIRECTION('',(-1.,0.));+#6527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6528 = PCURVE('',#4945,#6529);+#6529 = DEFINITIONAL_REPRESENTATION('',(#6530),#6534);+#6530 = LINE('',#6531,#6532);+#6531 = CARTESIAN_POINT('',(0.,-0.1));+#6532 = VECTOR('',#6533,1.);+#6533 = DIRECTION('',(1.,0.));+#6534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6535 = ORIENTED_EDGE('',*,*,#6536,.T.);+#6536 = EDGE_CURVE('',#6514,#6537,#6539,.T.);+#6537 = VERTEX_POINT('',#6538);+#6538 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.7000001));+#6539 = SURFACE_CURVE('',#6540,(#6544,#6551),.PCURVE_S1.);+#6540 = LINE('',#6541,#6542);+#6541 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,1.7000001+ ));+#6542 = VECTOR('',#6543,1.);+#6543 = DIRECTION('',(0.,-1.,0.));+#6544 = PCURVE('',#6430,#6545);+#6545 = DEFINITIONAL_REPRESENTATION('',(#6546),#6550);+#6546 = LINE('',#6547,#6548);+#6547 = CARTESIAN_POINT('',(0.123217719378,0.416923382959));+#6548 = VECTOR('',#6549,1.);+#6549 = DIRECTION('',(0.,-1.));+#6550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6551 = PCURVE('',#4918,#6552);+#6552 = DEFINITIONAL_REPRESENTATION('',(#6553),#6557);+#6553 = LINE('',#6554,#6555);+#6554 = CARTESIAN_POINT('',(0.,-0.1));+#6555 = VECTOR('',#6556,1.);+#6556 = DIRECTION('',(1.,0.));+#6557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6558 = ORIENTED_EDGE('',*,*,#6559,.T.);+#6559 = EDGE_CURVE('',#6537,#6560,#6562,.T.);+#6560 = VERTEX_POINT('',#6561);+#6561 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7000001));+#6562 = SURFACE_CURVE('',#6563,(#6567,#6574),.PCURVE_S1.);+#6563 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6564,#6565,#6566),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6564 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.7000001));+#6565 = CARTESIAN_POINT('',(-5.75121068707E-02,8.288046086024E-02,+ 1.7000001));+#6566 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7000001));+#6567 = PCURVE('',#6430,#6568);+#6568 = DEFINITIONAL_REPRESENTATION('',(#6569),#6573);+#6569 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6570,#6571,#6572),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6570 = CARTESIAN_POINT('',(0.123217719378,0.301268899553));+#6571 = CARTESIAN_POINT('',(0.136768517161,0.306311056868));+#6572 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#6573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6574 = PCURVE('',#4886,#6575);+#6575 = DEFINITIONAL_REPRESENTATION('',(#6576),#6580);+#6576 = LINE('',#6577,#6578);+#6577 = CARTESIAN_POINT('',(0.,-0.1));+#6578 = VECTOR('',#6579,1.);+#6579 = DIRECTION('',(1.,0.));+#6580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6581 = ORIENTED_EDGE('',*,*,#6582,.T.);+#6582 = EDGE_CURVE('',#6560,#6583,#6585,.T.);+#6583 = VERTEX_POINT('',#6584);+#6584 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7000001));+#6585 = SURFACE_CURVE('',#6586,(#6590,#6597),.PCURVE_S1.);+#6586 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6587,#6588,#6589),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6587 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7000001));+#6588 = CARTESIAN_POINT('',(-3.009537647206E-02,8.760748334276E-02,+ 1.7000001));+#6589 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7000001));+#6590 = PCURVE('',#6430,#6591);+#6591 = DEFINITIONAL_REPRESENTATION('',(#6592),#6596);+#6592 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6593,#6594,#6595),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6593 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#6594 = CARTESIAN_POINT('',(0.16418524756,0.31103807935));+#6595 = CARTESIAN_POINT('',(0.178051180175,0.31103807935));+#6596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6597 = PCURVE('',#4850,#6598);+#6598 = DEFINITIONAL_REPRESENTATION('',(#6599),#6603);+#6599 = LINE('',#6600,#6601);+#6600 = CARTESIAN_POINT('',(0.,-0.1));+#6601 = VECTOR('',#6602,1.);+#6602 = DIRECTION('',(1.,0.));+#6603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6604 = ORIENTED_EDGE('',*,*,#6605,.T.);+#6605 = EDGE_CURVE('',#6583,#6606,#6608,.T.);+#6606 = VERTEX_POINT('',#6607);+#6607 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,+ 1.7000001));+#6608 = SURFACE_CURVE('',#6609,(#6613,#6620),.PCURVE_S1.);+#6609 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6610,#6611,#6612),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6610 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7000001));+#6611 = CARTESIAN_POINT('',(5.688183720636E-02,8.760748334276E-02,+ 1.7000001));+#6612 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,+ 1.7000001));+#6613 = PCURVE('',#6430,#6614);+#6614 = DEFINITIONAL_REPRESENTATION('',(#6615),#6619);+#6615 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6616,#6617,#6618),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6616 = CARTESIAN_POINT('',(0.178051180175,0.31103807935));+#6617 = CARTESIAN_POINT('',(0.251162461238,0.31103807935));+#6618 = CARTESIAN_POINT('',(0.294020798413,0.267864607343));+#6619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6620 = PCURVE('',#4811,#6621);+#6621 = DEFINITIONAL_REPRESENTATION('',(#6622),#6626);+#6622 = LINE('',#6623,#6624);+#6623 = CARTESIAN_POINT('',(0.,-0.1));+#6624 = VECTOR('',#6625,1.);+#6625 = DIRECTION('',(1.,0.));+#6626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6627 = ORIENTED_EDGE('',*,*,#6628,.T.);+#6628 = EDGE_CURVE('',#6606,#6629,#6631,.T.);+#6629 = VERTEX_POINT('',#6630);+#6630 = CARTESIAN_POINT('',(0.142598511556,-7.248101139869E-02,1.7000001+ ));+#6631 = SURFACE_CURVE('',#6632,(#6636,#6643),.PCURVE_S1.);+#6632 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6633,#6634,#6635),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6633 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,+ 1.7000001));+#6634 = CARTESIAN_POINT('',(0.142598511556,1.260539328673E-03,1.7000001)+ );+#6635 = CARTESIAN_POINT('',(0.142598511556,-7.248101139869E-02,1.7000001+ ));+#6636 = PCURVE('',#6430,#6637);+#6637 = DEFINITIONAL_REPRESENTATION('',(#6638),#6642);+#6638 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6639,#6640,#6641),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6639 = CARTESIAN_POINT('',(0.294020798413,0.267864607343));+#6640 = CARTESIAN_POINT('',(0.336879135588,0.224691135336));+#6641 = CARTESIAN_POINT('',(0.336879135588,0.150949584609));+#6642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6643 = PCURVE('',#4766,#6644);+#6644 = DEFINITIONAL_REPRESENTATION('',(#6645),#6649);+#6645 = LINE('',#6646,#6647);+#6646 = CARTESIAN_POINT('',(0.,-0.1));+#6647 = VECTOR('',#6648,1.);+#6648 = DIRECTION('',(1.,0.));+#6649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6650 = ORIENTED_EDGE('',*,*,#6651,.T.);+#6651 = EDGE_CURVE('',#6629,#6652,#6654,.T.);+#6652 = VERTEX_POINT('',#6653);+#6653 = CARTESIAN_POINT('',(9.769179797215E-02,-0.189711168965,1.7000001+ ));+#6654 = SURFACE_CURVE('',#6655,(#6659,#6666),.PCURVE_S1.);+#6655 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6656,#6657,#6658),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6656 = CARTESIAN_POINT('',(0.142598511556,-7.248101139869E-02,1.7000001+ ));+#6657 = CARTESIAN_POINT('',(0.142598511556,-0.14685283179,1.7000001));+#6658 = CARTESIAN_POINT('',(9.769179797215E-02,-0.189711168965,1.7000001+ ));+#6659 = PCURVE('',#6430,#6660);+#6660 = DEFINITIONAL_REPRESENTATION('',(#6661),#6665);+#6661 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6662,#6663,#6664),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6662 = CARTESIAN_POINT('',(0.336879135588,0.150949584609));+#6663 = CARTESIAN_POINT('',(0.336879135588,7.657776421688E-02));+#6664 = CARTESIAN_POINT('',(0.291972422004,3.3719427042E-02));+#6665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6666 = PCURVE('',#4721,#6667);+#6667 = DEFINITIONAL_REPRESENTATION('',(#6668),#6672);+#6668 = LINE('',#6669,#6670);+#6669 = CARTESIAN_POINT('',(0.,-0.1));+#6670 = VECTOR('',#6671,1.);+#6671 = DIRECTION('',(1.,0.));+#6672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6673 = ORIENTED_EDGE('',*,*,#6674,.T.);+#6674 = EDGE_CURVE('',#6652,#6675,#6677,.T.);+#6675 = VERTEX_POINT('',#6676);+#6676 = CARTESIAN_POINT('',(-2.505321915737E-02,-0.23256950614,1.7000001+ ));+#6677 = SURFACE_CURVE('',#6678,(#6682,#6689),.PCURVE_S1.);+#6678 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6679,#6680,#6681),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6679 = CARTESIAN_POINT('',(9.769179797215E-02,-0.189711168965,1.7000001+ ));+#6680 = CARTESIAN_POINT('',(5.278508438818E-02,-0.23256950614,1.7000001)+ );+#6681 = CARTESIAN_POINT('',(-2.505321915737E-02,-0.23256950614,1.7000001+ ));+#6682 = PCURVE('',#6430,#6683);+#6683 = DEFINITIONAL_REPRESENTATION('',(#6684),#6688);+#6684 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6685,#6686,#6687),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6685 = CARTESIAN_POINT('',(0.291972422004,3.3719427042E-02));+#6686 = CARTESIAN_POINT('',(0.24706570842,-9.138910132878E-03));+#6687 = CARTESIAN_POINT('',(0.169227404874,-9.138910132878E-03));+#6688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6689 = PCURVE('',#4676,#6690);+#6690 = DEFINITIONAL_REPRESENTATION('',(#6691),#6695);+#6691 = LINE('',#6692,#6693);+#6692 = CARTESIAN_POINT('',(0.,-0.1));+#6693 = VECTOR('',#6694,1.);+#6694 = DIRECTION('',(1.,0.));+#6695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6696 = ORIENTED_EDGE('',*,*,#6697,.T.);+#6697 = EDGE_CURVE('',#6675,#6698,#6700,.T.);+#6698 = VERTEX_POINT('',#6699);+#6699 = CARTESIAN_POINT('',(-9.359504515396E-02,-0.227527348825,+ 1.7000001));+#6700 = SURFACE_CURVE('',#6701,(#6705,#6712),.PCURVE_S1.);+#6701 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6702,#6703,#6704),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6702 = CARTESIAN_POINT('',(-2.505321915737E-02,-0.23256950614,1.7000001+ ));+#6703 = CARTESIAN_POINT('',(-6.255426418539E-02,-0.23256950614,1.7000001+ ));+#6704 = CARTESIAN_POINT('',(-9.359504515396E-02,-0.227527348825,+ 1.7000001));+#6705 = PCURVE('',#6430,#6706);+#6706 = DEFINITIONAL_REPRESENTATION('',(#6707),#6711);+#6707 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6708,#6709,#6710),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6708 = CARTESIAN_POINT('',(0.169227404874,-9.138910132878E-03));+#6709 = CARTESIAN_POINT('',(0.131726359846,-9.138910132878E-03));+#6710 = CARTESIAN_POINT('',(0.100685578878,-4.096752818187E-03));+#6711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6712 = PCURVE('',#4634,#6713);+#6713 = DEFINITIONAL_REPRESENTATION('',(#6714),#6718);+#6714 = LINE('',#6715,#6716);+#6715 = CARTESIAN_POINT('',(0.,-0.1));+#6716 = VECTOR('',#6717,1.);+#6717 = DIRECTION('',(1.,0.));+#6718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6719 = ORIENTED_EDGE('',*,*,#6720,.T.);+#6720 = EDGE_CURVE('',#6698,#6721,#6723,.T.);+#6721 = VERTEX_POINT('',#6722);+#6722 = CARTESIAN_POINT('',(-0.149216343032,-0.212400876881,1.7000001));+#6723 = SURFACE_CURVE('',#6724,(#6728,#6735),.PCURVE_S1.);+#6724 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6725,#6726,#6727),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6725 = CARTESIAN_POINT('',(-9.359504515396E-02,-0.227527348825,+ 1.7000001));+#6726 = CARTESIAN_POINT('',(-0.124635826123,-0.222485191511,1.7000001));+#6727 = CARTESIAN_POINT('',(-0.149216343032,-0.212400876881,1.7000001));+#6728 = PCURVE('',#6430,#6729);+#6729 = DEFINITIONAL_REPRESENTATION('',(#6730),#6734);+#6730 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6731,#6732,#6733),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6731 = CARTESIAN_POINT('',(0.100685578878,-4.096752818187E-03));+#6732 = CARTESIAN_POINT('',(6.964479790918E-02,9.454044965046E-04));+#6733 = CARTESIAN_POINT('',(4.506428100005E-02,1.102971912589E-02));+#6734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6735 = PCURVE('',#4598,#6736);+#6736 = DEFINITIONAL_REPRESENTATION('',(#6737),#6741);+#6737 = LINE('',#6738,#6739);+#6738 = CARTESIAN_POINT('',(0.,-0.1));+#6739 = VECTOR('',#6740,1.);+#6740 = DIRECTION('',(1.,0.));+#6741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6742 = ORIENTED_EDGE('',*,*,#6743,.T.);+#6743 = EDGE_CURVE('',#6721,#6744,#6746,.T.);+#6744 = VERTEX_POINT('',#6745);+#6745 = CARTESIAN_POINT('',(-0.149216343032,-0.147798236287,1.7000001));+#6746 = SURFACE_CURVE('',#6747,(#6751,#6758),.PCURVE_S1.);+#6747 = LINE('',#6748,#6749);+#6748 = CARTESIAN_POINT('',(-0.149216343032,-0.212400876881,1.7000001));+#6749 = VECTOR('',#6750,1.);+#6750 = DIRECTION('',(0.,1.,0.));+#6751 = PCURVE('',#6430,#6752);+#6752 = DEFINITIONAL_REPRESENTATION('',(#6753),#6757);+#6753 = LINE('',#6754,#6755);+#6754 = CARTESIAN_POINT('',(4.506428100005E-02,1.102971912589E-02));+#6755 = VECTOR('',#6756,1.);+#6756 = DIRECTION('',(0.,1.));+#6757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6758 = PCURVE('',#4567,#6759);+#6759 = DEFINITIONAL_REPRESENTATION('',(#6760),#6764);+#6760 = LINE('',#6761,#6762);+#6761 = CARTESIAN_POINT('',(0.,-0.1));+#6762 = VECTOR('',#6763,1.);+#6763 = DIRECTION('',(1.,0.));+#6764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6765 = ORIENTED_EDGE('',*,*,#6766,.T.);+#6766 = EDGE_CURVE('',#6744,#6767,#6769,.T.);+#6767 = VERTEX_POINT('',#6768);+#6768 = CARTESIAN_POINT('',(-9.091639908053E-02,-0.171275781283,+ 1.7000001));+#6769 = SURFACE_CURVE('',#6770,(#6774,#6781),.PCURVE_S1.);+#6770 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6771,#6772,#6773),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6771 = CARTESIAN_POINT('',(-0.149216343032,-0.147798236287,1.7000001));+#6772 = CARTESIAN_POINT('',(-0.120223938472,-0.163554977895,1.7000001));+#6773 = CARTESIAN_POINT('',(-9.091639908053E-02,-0.171275781283,+ 1.7000001));+#6774 = PCURVE('',#6430,#6775);+#6775 = DEFINITIONAL_REPRESENTATION('',(#6776),#6780);+#6776 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6777,#6778,#6779),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6777 = CARTESIAN_POINT('',(4.506428100005E-02,7.563235972037E-02));+#6778 = CARTESIAN_POINT('',(7.405668555953E-02,5.987561811196E-02));+#6779 = CARTESIAN_POINT('',(0.103364224951,5.215481472384E-02));+#6780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6781 = PCURVE('',#4535,#6782);+#6782 = DEFINITIONAL_REPRESENTATION('',(#6783),#6787);+#6783 = LINE('',#6784,#6785);+#6784 = CARTESIAN_POINT('',(0.,-0.1));+#6785 = VECTOR('',#6786,1.);+#6786 = DIRECTION('',(1.,0.));+#6787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6788 = ORIENTED_EDGE('',*,*,#6789,.T.);+#6789 = EDGE_CURVE('',#6767,#6790,#6792,.T.);+#6790 = VERTEX_POINT('',#6791);+#6791 = CARTESIAN_POINT('',(-3.104078096857E-02,-0.178996584672,+ 1.7000001));+#6792 = SURFACE_CURVE('',#6793,(#6797,#6804),.PCURVE_S1.);+#6793 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6794,#6795,#6796),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6794 = CARTESIAN_POINT('',(-9.091639908053E-02,-0.171275781283,+ 1.7000001));+#6795 = CARTESIAN_POINT('',(-6.160885968889E-02,-0.178996584672,+ 1.7000001));+#6796 = CARTESIAN_POINT('',(-3.104078096857E-02,-0.178996584672,+ 1.7000001));+#6797 = PCURVE('',#6430,#6798);+#6798 = DEFINITIONAL_REPRESENTATION('',(#6799),#6803);+#6799 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6800,#6801,#6802),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6800 = CARTESIAN_POINT('',(0.103364224951,5.215481472384E-02));+#6801 = CARTESIAN_POINT('',(0.132671764343,4.443401133572E-02));+#6802 = CARTESIAN_POINT('',(0.163239843063,4.443401133572E-02));+#6803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6804 = PCURVE('',#4499,#6805);+#6805 = DEFINITIONAL_REPRESENTATION('',(#6806),#6810);+#6806 = LINE('',#6807,#6808);+#6807 = CARTESIAN_POINT('',(0.,-0.1));+#6808 = VECTOR('',#6809,1.);+#6809 = DIRECTION('',(1.,0.));+#6810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6811 = ORIENTED_EDGE('',*,*,#6812,.T.);+#6812 = EDGE_CURVE('',#6790,#6813,#6815,.T.);+#6813 = VERTEX_POINT('',#6814);+#6814 = CARTESIAN_POINT('',(5.010643831475E-02,-0.151264719441,1.7000001+ ));+#6815 = SURFACE_CURVE('',#6816,(#6820,#6827),.PCURVE_S1.);+#6816 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6817,#6818,#6819),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6817 = CARTESIAN_POINT('',(-3.104078096857E-02,-0.178996584672,+ 1.7000001));+#6818 = CARTESIAN_POINT('',(2.158673600352E-02,-0.178996584672,1.7000001+ ));+#6819 = CARTESIAN_POINT('',(5.010643831475E-02,-0.151264719441,1.7000001+ ));+#6820 = PCURVE('',#6430,#6821);+#6821 = DEFINITIONAL_REPRESENTATION('',(#6822),#6826);+#6822 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6823,#6824,#6825),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6823 = CARTESIAN_POINT('',(0.163239843063,4.443401133572E-02));+#6824 = CARTESIAN_POINT('',(0.215867360035,4.443401133572E-02));+#6825 = CARTESIAN_POINT('',(0.244387062346,7.216587656652E-02));+#6826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6827 = PCURVE('',#4463,#6828);+#6828 = DEFINITIONAL_REPRESENTATION('',(#6829),#6833);+#6829 = LINE('',#6830,#6831);+#6830 = CARTESIAN_POINT('',(0.,-0.1));+#6831 = VECTOR('',#6832,1.);+#6832 = DIRECTION('',(1.,0.));+#6833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6834 = ORIENTED_EDGE('',*,*,#6835,.T.);+#6835 = EDGE_CURVE('',#6813,#6836,#6838,.T.);+#6836 = VERTEX_POINT('',#6837);+#6837 = CARTESIAN_POINT('',(7.862614062597E-02,-7.248101139869E-02,+ 1.7000001));+#6838 = SURFACE_CURVE('',#6839,(#6843,#6850),.PCURVE_S1.);+#6839 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6840,#6841,#6842),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6840 = CARTESIAN_POINT('',(5.010643831475E-02,-0.151264719441,1.7000001+ ));+#6841 = CARTESIAN_POINT('',(7.862614062597E-02,-0.12353285421,1.7000001)+ );+#6842 = CARTESIAN_POINT('',(7.862614062597E-02,-7.248101139869E-02,+ 1.7000001));+#6843 = PCURVE('',#6430,#6844);+#6844 = DEFINITIONAL_REPRESENTATION('',(#6845),#6849);+#6845 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6846,#6847,#6848),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6846 = CARTESIAN_POINT('',(0.244387062346,7.216587656652E-02));+#6847 = CARTESIAN_POINT('',(0.272906764658,9.989774179732E-02));+#6848 = CARTESIAN_POINT('',(0.272906764658,0.150949584609));+#6849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6850 = PCURVE('',#4427,#6851);+#6851 = DEFINITIONAL_REPRESENTATION('',(#6852),#6856);+#6852 = LINE('',#6853,#6854);+#6853 = CARTESIAN_POINT('',(0.,-0.1));+#6854 = VECTOR('',#6855,1.);+#6855 = DIRECTION('',(1.,0.));+#6856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6857 = ORIENTED_EDGE('',*,*,#6858,.T.);+#6858 = EDGE_CURVE('',#6836,#6859,#6861,.T.);+#6859 = VERTEX_POINT('',#6860);+#6860 = CARTESIAN_POINT('',(4.916103381824E-02,5.987561811196E-03,+ 1.7000001));+#6861 = SURFACE_CURVE('',#6862,(#6866,#6873),.PCURVE_S1.);+#6862 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6863,#6864,#6865),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6863 = CARTESIAN_POINT('',(7.862614062597E-02,-7.248101139869E-02,+ 1.7000001));+#6864 = CARTESIAN_POINT('',(7.862614062597E-02,-2.205943825177E-02,+ 1.7000001));+#6865 = CARTESIAN_POINT('',(4.916103381824E-02,5.987561811196E-03,+ 1.7000001));+#6866 = PCURVE('',#6430,#6867);+#6867 = DEFINITIONAL_REPRESENTATION('',(#6868),#6872);+#6868 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6869,#6870,#6871),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6869 = CARTESIAN_POINT('',(0.272906764658,0.150949584609));+#6870 = CARTESIAN_POINT('',(0.272906764658,0.201371157755));+#6871 = CARTESIAN_POINT('',(0.24344165785,0.229418157818));+#6872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6873 = PCURVE('',#4388,#6874);+#6874 = DEFINITIONAL_REPRESENTATION('',(#6875),#6879);+#6875 = LINE('',#6876,#6877);+#6876 = CARTESIAN_POINT('',(0.,-0.1));+#6877 = VECTOR('',#6878,1.);+#6878 = DIRECTION('',(1.,0.));+#6879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6880 = ORIENTED_EDGE('',*,*,#6881,.T.);+#6881 = EDGE_CURVE('',#6859,#6882,#6884,.T.);+#6882 = VERTEX_POINT('',#6883);+#6883 = CARTESIAN_POINT('',(-3.293158996158E-02,3.403456187417E-02,+ 1.7000001));+#6884 = SURFACE_CURVE('',#6885,(#6889,#6896),.PCURVE_S1.);+#6885 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6886,#6887,#6888),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6886 = CARTESIAN_POINT('',(4.916103381824E-02,5.987561811196E-03,+ 1.7000001));+#6887 = CARTESIAN_POINT('',(1.969592701051E-02,3.403456187417E-02,+ 1.7000001));+#6888 = CARTESIAN_POINT('',(-3.293158996158E-02,3.403456187417E-02,+ 1.7000001));+#6889 = PCURVE('',#6430,#6890);+#6890 = DEFINITIONAL_REPRESENTATION('',(#6891),#6895);+#6891 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6892,#6893,#6894),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6892 = CARTESIAN_POINT('',(0.24344165785,0.229418157818));+#6893 = CARTESIAN_POINT('',(0.213976551042,0.257465157881));+#6894 = CARTESIAN_POINT('',(0.16134903407,0.257465157881));+#6895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6896 = PCURVE('',#4346,#6897);+#6897 = DEFINITIONAL_REPRESENTATION('',(#6898),#6902);+#6898 = LINE('',#6899,#6900);+#6899 = CARTESIAN_POINT('',(0.,-0.1));+#6900 = VECTOR('',#6901,1.);+#6901 = DIRECTION('',(1.,0.));+#6902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6903 = ORIENTED_EDGE('',*,*,#6904,.T.);+#6904 = EDGE_CURVE('',#6882,#6905,#6907,.T.);+#6905 = VERTEX_POINT('',#6906);+#6906 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747906E-02,+ 1.7000001));+#6907 = SURFACE_CURVE('',#6908,(#6912,#6919),.PCURVE_S1.);+#6908 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6909,#6910,#6911),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6909 = CARTESIAN_POINT('',(-3.293158996158E-02,3.403456187417E-02,+ 1.7000001));+#6910 = CARTESIAN_POINT('',(-5.84575113672E-02,3.403456187417E-02,+ 1.7000001));+#6911 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747906E-02,+ 1.7000001));+#6912 = PCURVE('',#6430,#6913);+#6913 = DEFINITIONAL_REPRESENTATION('',(#6914),#6918);+#6914 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6915,#6916,#6917),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6915 = CARTESIAN_POINT('',(0.16134903407,0.257465157881));+#6916 = CARTESIAN_POINT('',(0.135823112664,0.257465157881));+#6917 = CARTESIAN_POINT('',(0.111557730588,0.251635163486));+#6918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6919 = PCURVE('',#4310,#6920);+#6920 = DEFINITIONAL_REPRESENTATION('',(#6921),#6925);+#6921 = LINE('',#6922,#6923);+#6922 = CARTESIAN_POINT('',(0.,-0.1));+#6923 = VECTOR('',#6924,1.);+#6924 = DIRECTION('',(1.,0.));+#6925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6926 = ORIENTED_EDGE('',*,*,#6927,.T.);+#6927 = EDGE_CURVE('',#6905,#6467,#6928,.T.);+#6928 = SURFACE_CURVE('',#6929,(#6933,#6940),.PCURVE_S1.);+#6929 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6930,#6931,#6932),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6930 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747906E-02,+ 1.7000001));+#6931 = CARTESIAN_POINT('',(-0.106988275521,2.237457308394E-02,1.7000001+ ));+#6932 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,1.7000001+ ));+#6933 = PCURVE('',#6430,#6934);+#6934 = DEFINITIONAL_REPRESENTATION('',(#6935),#6939);+#6935 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6936,#6937,#6938),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6936 = CARTESIAN_POINT('',(0.111557730588,0.251635163486));+#6937 = CARTESIAN_POINT('',(8.729234851059E-02,0.245805169091));+#6938 = CARTESIAN_POINT('',(6.523291025882E-02,0.234145180301));+#6939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6940 = PCURVE('',#4274,#6941);+#6941 = DEFINITIONAL_REPRESENTATION('',(#6942),#6946);+#6942 = LINE('',#6943,#6944);+#6943 = CARTESIAN_POINT('',(0.,-0.1));+#6944 = VECTOR('',#6945,1.);+#6945 = DIRECTION('',(1.,0.));+#6946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6947 = ADVANCED_FACE('',(#6948),#4945,.T.);+#6948 = FACE_BOUND('',#6949,.T.);+#6949 = EDGE_LOOP('',(#6950,#6951,#6952,#6953));+#6950 = ORIENTED_EDGE('',*,*,#4929,.T.);+#6951 = ORIENTED_EDGE('',*,*,#6442,.T.);+#6952 = ORIENTED_EDGE('',*,*,#6513,.T.);+#6953 = ORIENTED_EDGE('',*,*,#6954,.F.);+#6954 = EDGE_CURVE('',#4903,#6514,#6955,.T.);+#6955 = SURFACE_CURVE('',#6956,(#6960,#6967),.PCURVE_S1.);+#6956 = LINE('',#6957,#6958);+#6957 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,1.8000001+ ));+#6958 = VECTOR('',#6959,1.);+#6959 = DIRECTION('',(-0.,-0.,-1.));+#6960 = PCURVE('',#4945,#6961);+#6961 = DEFINITIONAL_REPRESENTATION('',(#6962),#6966);+#6962 = LINE('',#6963,#6964);+#6963 = CARTESIAN_POINT('',(0.180257124,0.));+#6964 = VECTOR('',#6965,1.);+#6965 = DIRECTION('',(0.,-1.));+#6966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6967 = PCURVE('',#4918,#6968);+#6968 = DEFINITIONAL_REPRESENTATION('',(#6969),#6973);+#6969 = LINE('',#6970,#6971);+#6970 = CARTESIAN_POINT('',(0.,0.));+#6971 = VECTOR('',#6972,1.);+#6972 = DIRECTION('',(0.,-1.));+#6973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6974 = ADVANCED_FACE('',(#6975),#4918,.T.);+#6975 = FACE_BOUND('',#6976,.T.);+#6976 = EDGE_LOOP('',(#6977,#6978,#6979,#6980));+#6977 = ORIENTED_EDGE('',*,*,#4902,.T.);+#6978 = ORIENTED_EDGE('',*,*,#6954,.T.);+#6979 = ORIENTED_EDGE('',*,*,#6536,.T.);+#6980 = ORIENTED_EDGE('',*,*,#6981,.F.);+#6981 = EDGE_CURVE('',#4867,#6537,#6982,.T.);+#6982 = SURFACE_CURVE('',#6983,(#6987,#6994),.PCURVE_S1.);+#6983 = LINE('',#6984,#6985);+#6984 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.8000001));+#6985 = VECTOR('',#6986,1.);+#6986 = DIRECTION('',(-0.,-0.,-1.));+#6987 = PCURVE('',#4918,#6988);+#6988 = DEFINITIONAL_REPRESENTATION('',(#6989),#6993);+#6989 = LINE('',#6990,#6991);+#6990 = CARTESIAN_POINT('',(0.115654483406,0.));+#6991 = VECTOR('',#6992,1.);+#6992 = DIRECTION('',(0.,-1.));+#6993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6994 = PCURVE('',#4886,#6995);+#6995 = DEFINITIONAL_REPRESENTATION('',(#6996),#7000);+#6996 = LINE('',#6997,#6998);+#6997 = CARTESIAN_POINT('',(0.,0.));+#6998 = VECTOR('',#6999,1.);+#6999 = DIRECTION('',(0.,-1.));+#7000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7001 = ADVANCED_FACE('',(#7002),#4886,.T.);+#7002 = FACE_BOUND('',#7003,.T.);+#7003 = EDGE_LOOP('',(#7004,#7005,#7006,#7007));+#7004 = ORIENTED_EDGE('',*,*,#4866,.T.);+#7005 = ORIENTED_EDGE('',*,*,#6981,.T.);+#7006 = ORIENTED_EDGE('',*,*,#6559,.T.);+#7007 = ORIENTED_EDGE('',*,*,#7008,.F.);+#7008 = EDGE_CURVE('',#4831,#6560,#7009,.T.);+#7009 = SURFACE_CURVE('',#7010,(#7014,#7021),.PCURVE_S1.);+#7010 = LINE('',#7011,#7012);+#7011 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.8000001));+#7012 = VECTOR('',#7013,1.);+#7013 = DIRECTION('',(-0.,-0.,-1.));+#7014 = PCURVE('',#4886,#7015);+#7015 = DEFINITIONAL_REPRESENTATION('',(#7016),#7020);+#7016 = LINE('',#7017,#7018);+#7017 = CARTESIAN_POINT('',(1.,0.));+#7018 = VECTOR('',#7019,1.);+#7019 = DIRECTION('',(0.,-1.));+#7020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7021 = PCURVE('',#4850,#7022);+#7022 = DEFINITIONAL_REPRESENTATION('',(#7023),#7027);+#7023 = LINE('',#7024,#7025);+#7024 = CARTESIAN_POINT('',(0.,0.));+#7025 = VECTOR('',#7026,1.);+#7026 = DIRECTION('',(0.,-1.));+#7027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7028 = ADVANCED_FACE('',(#7029),#4850,.T.);+#7029 = FACE_BOUND('',#7030,.T.);+#7030 = EDGE_LOOP('',(#7031,#7032,#7033,#7034));+#7031 = ORIENTED_EDGE('',*,*,#4830,.T.);+#7032 = ORIENTED_EDGE('',*,*,#7008,.T.);+#7033 = ORIENTED_EDGE('',*,*,#6582,.T.);+#7034 = ORIENTED_EDGE('',*,*,#7035,.F.);+#7035 = EDGE_CURVE('',#4786,#6583,#7036,.T.);+#7036 = SURFACE_CURVE('',#7037,(#7041,#7048),.PCURVE_S1.);+#7037 = LINE('',#7038,#7039);+#7038 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.8000001));+#7039 = VECTOR('',#7040,1.);+#7040 = DIRECTION('',(-0.,-0.,-1.));+#7041 = PCURVE('',#4850,#7042);+#7042 = DEFINITIONAL_REPRESENTATION('',(#7043),#7047);+#7043 = LINE('',#7044,#7045);+#7044 = CARTESIAN_POINT('',(1.,0.));+#7045 = VECTOR('',#7046,1.);+#7046 = DIRECTION('',(0.,-1.));+#7047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7048 = PCURVE('',#4811,#7049);+#7049 = DEFINITIONAL_REPRESENTATION('',(#7050),#7054);+#7050 = LINE('',#7051,#7052);+#7051 = CARTESIAN_POINT('',(0.,0.));+#7052 = VECTOR('',#7053,1.);+#7053 = DIRECTION('',(0.,-1.));+#7054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7055 = ADVANCED_FACE('',(#7056),#4811,.T.);+#7056 = FACE_BOUND('',#7057,.T.);+#7057 = EDGE_LOOP('',(#7058,#7059,#7060,#7061));+#7058 = ORIENTED_EDGE('',*,*,#4785,.T.);+#7059 = ORIENTED_EDGE('',*,*,#7035,.T.);+#7060 = ORIENTED_EDGE('',*,*,#6605,.T.);+#7061 = ORIENTED_EDGE('',*,*,#7062,.F.);+#7062 = EDGE_CURVE('',#4741,#6606,#7063,.T.);+#7063 = SURFACE_CURVE('',#7064,(#7068,#7075),.PCURVE_S1.);+#7064 = LINE('',#7065,#7066);+#7065 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,+ 1.8000001));+#7066 = VECTOR('',#7067,1.);+#7067 = DIRECTION('',(-0.,-0.,-1.));+#7068 = PCURVE('',#4811,#7069);+#7069 = DEFINITIONAL_REPRESENTATION('',(#7070),#7074);+#7070 = LINE('',#7071,#7072);+#7071 = CARTESIAN_POINT('',(1.,0.));+#7072 = VECTOR('',#7073,1.);+#7073 = DIRECTION('',(0.,-1.));+#7074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7075 = PCURVE('',#4766,#7076);+#7076 = DEFINITIONAL_REPRESENTATION('',(#7077),#7081);+#7077 = LINE('',#7078,#7079);+#7078 = CARTESIAN_POINT('',(0.,0.));+#7079 = VECTOR('',#7080,1.);+#7080 = DIRECTION('',(0.,-1.));+#7081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7082 = ADVANCED_FACE('',(#7083),#4766,.T.);+#7083 = FACE_BOUND('',#7084,.T.);+#7084 = EDGE_LOOP('',(#7085,#7086,#7087,#7088));+#7085 = ORIENTED_EDGE('',*,*,#4740,.T.);+#7086 = ORIENTED_EDGE('',*,*,#7062,.T.);+#7087 = ORIENTED_EDGE('',*,*,#6628,.T.);+#7088 = ORIENTED_EDGE('',*,*,#7089,.F.);+#7089 = EDGE_CURVE('',#4696,#6629,#7090,.T.);+#7090 = SURFACE_CURVE('',#7091,(#7095,#7102),.PCURVE_S1.);+#7091 = LINE('',#7092,#7093);+#7092 = CARTESIAN_POINT('',(0.142598511556,-7.248101139869E-02,1.8000001+ ));+#7093 = VECTOR('',#7094,1.);+#7094 = DIRECTION('',(-0.,-0.,-1.));+#7095 = PCURVE('',#4766,#7096);+#7096 = DEFINITIONAL_REPRESENTATION('',(#7097),#7101);+#7097 = LINE('',#7098,#7099);+#7098 = CARTESIAN_POINT('',(1.,0.));+#7099 = VECTOR('',#7100,1.);+#7100 = DIRECTION('',(0.,-1.));+#7101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7102 = PCURVE('',#4721,#7103);+#7103 = DEFINITIONAL_REPRESENTATION('',(#7104),#7108);+#7104 = LINE('',#7105,#7106);+#7105 = CARTESIAN_POINT('',(0.,0.));+#7106 = VECTOR('',#7107,1.);+#7107 = DIRECTION('',(0.,-1.));+#7108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7109 = ADVANCED_FACE('',(#7110),#4721,.T.);+#7110 = FACE_BOUND('',#7111,.T.);+#7111 = EDGE_LOOP('',(#7112,#7113,#7114,#7115));+#7112 = ORIENTED_EDGE('',*,*,#4695,.T.);+#7113 = ORIENTED_EDGE('',*,*,#7089,.T.);+#7114 = ORIENTED_EDGE('',*,*,#6651,.T.);+#7115 = ORIENTED_EDGE('',*,*,#7116,.F.);+#7116 = EDGE_CURVE('',#4651,#6652,#7117,.T.);+#7117 = SURFACE_CURVE('',#7118,(#7122,#7129),.PCURVE_S1.);+#7118 = LINE('',#7119,#7120);+#7119 = CARTESIAN_POINT('',(9.769179797215E-02,-0.189711168965,1.8000001+ ));+#7120 = VECTOR('',#7121,1.);+#7121 = DIRECTION('',(-0.,-0.,-1.));+#7122 = PCURVE('',#4721,#7123);+#7123 = DEFINITIONAL_REPRESENTATION('',(#7124),#7128);+#7124 = LINE('',#7125,#7126);+#7125 = CARTESIAN_POINT('',(1.,0.));+#7126 = VECTOR('',#7127,1.);+#7127 = DIRECTION('',(0.,-1.));+#7128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7129 = PCURVE('',#4676,#7130);+#7130 = DEFINITIONAL_REPRESENTATION('',(#7131),#7135);+#7131 = LINE('',#7132,#7133);+#7132 = CARTESIAN_POINT('',(0.,0.));+#7133 = VECTOR('',#7134,1.);+#7134 = DIRECTION('',(0.,-1.));+#7135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7136 = ADVANCED_FACE('',(#7137),#4676,.T.);+#7137 = FACE_BOUND('',#7138,.T.);+#7138 = EDGE_LOOP('',(#7139,#7140,#7141,#7142));+#7139 = ORIENTED_EDGE('',*,*,#4650,.T.);+#7140 = ORIENTED_EDGE('',*,*,#7116,.T.);+#7141 = ORIENTED_EDGE('',*,*,#6674,.T.);+#7142 = ORIENTED_EDGE('',*,*,#7143,.F.);+#7143 = EDGE_CURVE('',#4615,#6675,#7144,.T.);+#7144 = SURFACE_CURVE('',#7145,(#7149,#7156),.PCURVE_S1.);+#7145 = LINE('',#7146,#7147);+#7146 = CARTESIAN_POINT('',(-2.505321915737E-02,-0.23256950614,1.8000001+ ));+#7147 = VECTOR('',#7148,1.);+#7148 = DIRECTION('',(-0.,-0.,-1.));+#7149 = PCURVE('',#4676,#7150);+#7150 = DEFINITIONAL_REPRESENTATION('',(#7151),#7155);+#7151 = LINE('',#7152,#7153);+#7152 = CARTESIAN_POINT('',(1.,0.));+#7153 = VECTOR('',#7154,1.);+#7154 = DIRECTION('',(0.,-1.));+#7155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7156 = PCURVE('',#4634,#7157);+#7157 = DEFINITIONAL_REPRESENTATION('',(#7158),#7162);+#7158 = LINE('',#7159,#7160);+#7159 = CARTESIAN_POINT('',(0.,0.));+#7160 = VECTOR('',#7161,1.);+#7161 = DIRECTION('',(0.,-1.));+#7162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7163 = ADVANCED_FACE('',(#7164),#4634,.T.);+#7164 = FACE_BOUND('',#7165,.T.);+#7165 = EDGE_LOOP('',(#7166,#7167,#7168,#7169));+#7166 = ORIENTED_EDGE('',*,*,#4614,.T.);+#7167 = ORIENTED_EDGE('',*,*,#7143,.T.);+#7168 = ORIENTED_EDGE('',*,*,#6697,.T.);+#7169 = ORIENTED_EDGE('',*,*,#7170,.F.);+#7170 = EDGE_CURVE('',#4579,#6698,#7171,.T.);+#7171 = SURFACE_CURVE('',#7172,(#7176,#7183),.PCURVE_S1.);+#7172 = LINE('',#7173,#7174);+#7173 = CARTESIAN_POINT('',(-9.359504515396E-02,-0.227527348825,+ 1.8000001));+#7174 = VECTOR('',#7175,1.);+#7175 = DIRECTION('',(-0.,-0.,-1.));+#7176 = PCURVE('',#4634,#7177);+#7177 = DEFINITIONAL_REPRESENTATION('',(#7178),#7182);+#7178 = LINE('',#7179,#7180);+#7179 = CARTESIAN_POINT('',(1.,0.));+#7180 = VECTOR('',#7181,1.);+#7181 = DIRECTION('',(0.,-1.));+#7182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7183 = PCURVE('',#4598,#7184);+#7184 = DEFINITIONAL_REPRESENTATION('',(#7185),#7189);+#7185 = LINE('',#7186,#7187);+#7186 = CARTESIAN_POINT('',(0.,0.));+#7187 = VECTOR('',#7188,1.);+#7188 = DIRECTION('',(0.,-1.));+#7189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7190 = ADVANCED_FACE('',(#7191),#4598,.T.);+#7191 = FACE_BOUND('',#7192,.T.);+#7192 = EDGE_LOOP('',(#7193,#7194,#7195,#7196));+#7193 = ORIENTED_EDGE('',*,*,#4578,.T.);+#7194 = ORIENTED_EDGE('',*,*,#7170,.T.);+#7195 = ORIENTED_EDGE('',*,*,#6720,.T.);+#7196 = ORIENTED_EDGE('',*,*,#7197,.F.);+#7197 = EDGE_CURVE('',#4552,#6721,#7198,.T.);+#7198 = SURFACE_CURVE('',#7199,(#7203,#7210),.PCURVE_S1.);+#7199 = LINE('',#7200,#7201);+#7200 = CARTESIAN_POINT('',(-0.149216343032,-0.212400876881,1.8000001));+#7201 = VECTOR('',#7202,1.);+#7202 = DIRECTION('',(-0.,-0.,-1.));+#7203 = PCURVE('',#4598,#7204);+#7204 = DEFINITIONAL_REPRESENTATION('',(#7205),#7209);+#7205 = LINE('',#7206,#7207);+#7206 = CARTESIAN_POINT('',(1.,0.));+#7207 = VECTOR('',#7208,1.);+#7208 = DIRECTION('',(0.,-1.));+#7209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7210 = PCURVE('',#4567,#7211);+#7211 = DEFINITIONAL_REPRESENTATION('',(#7212),#7216);+#7212 = LINE('',#7213,#7214);+#7213 = CARTESIAN_POINT('',(0.,0.));+#7214 = VECTOR('',#7215,1.);+#7215 = DIRECTION('',(0.,-1.));+#7216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7217 = ADVANCED_FACE('',(#7218),#4567,.T.);+#7218 = FACE_BOUND('',#7219,.T.);+#7219 = EDGE_LOOP('',(#7220,#7221,#7222,#7223));+#7220 = ORIENTED_EDGE('',*,*,#4551,.T.);+#7221 = ORIENTED_EDGE('',*,*,#7197,.T.);+#7222 = ORIENTED_EDGE('',*,*,#6743,.T.);+#7223 = ORIENTED_EDGE('',*,*,#7224,.F.);+#7224 = EDGE_CURVE('',#4516,#6744,#7225,.T.);+#7225 = SURFACE_CURVE('',#7226,(#7230,#7237),.PCURVE_S1.);+#7226 = LINE('',#7227,#7228);+#7227 = CARTESIAN_POINT('',(-0.149216343032,-0.147798236287,1.8000001));+#7228 = VECTOR('',#7229,1.);+#7229 = DIRECTION('',(-0.,-0.,-1.));+#7230 = PCURVE('',#4567,#7231);+#7231 = DEFINITIONAL_REPRESENTATION('',(#7232),#7236);+#7232 = LINE('',#7233,#7234);+#7233 = CARTESIAN_POINT('',(6.460264059448E-02,0.));+#7234 = VECTOR('',#7235,1.);+#7235 = DIRECTION('',(0.,-1.));+#7236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7237 = PCURVE('',#4535,#7238);+#7238 = DEFINITIONAL_REPRESENTATION('',(#7239),#7243);+#7239 = LINE('',#7240,#7241);+#7240 = CARTESIAN_POINT('',(0.,0.));+#7241 = VECTOR('',#7242,1.);+#7242 = DIRECTION('',(0.,-1.));+#7243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7244 = ADVANCED_FACE('',(#7245),#4535,.T.);+#7245 = FACE_BOUND('',#7246,.T.);+#7246 = EDGE_LOOP('',(#7247,#7248,#7249,#7250));+#7247 = ORIENTED_EDGE('',*,*,#4515,.T.);+#7248 = ORIENTED_EDGE('',*,*,#7224,.T.);+#7249 = ORIENTED_EDGE('',*,*,#6766,.T.);+#7250 = ORIENTED_EDGE('',*,*,#7251,.F.);+#7251 = EDGE_CURVE('',#4480,#6767,#7252,.T.);+#7252 = SURFACE_CURVE('',#7253,(#7257,#7264),.PCURVE_S1.);+#7253 = LINE('',#7254,#7255);+#7254 = CARTESIAN_POINT('',(-9.091639908053E-02,-0.171275781283,+ 1.8000001));+#7255 = VECTOR('',#7256,1.);+#7256 = DIRECTION('',(-0.,-0.,-1.));+#7257 = PCURVE('',#4535,#7258);+#7258 = DEFINITIONAL_REPRESENTATION('',(#7259),#7263);+#7259 = LINE('',#7260,#7261);+#7260 = CARTESIAN_POINT('',(1.,0.));+#7261 = VECTOR('',#7262,1.);+#7262 = DIRECTION('',(0.,-1.));+#7263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7264 = PCURVE('',#4499,#7265);+#7265 = DEFINITIONAL_REPRESENTATION('',(#7266),#7270);+#7266 = LINE('',#7267,#7268);+#7267 = CARTESIAN_POINT('',(0.,0.));+#7268 = VECTOR('',#7269,1.);+#7269 = DIRECTION('',(0.,-1.));+#7270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7271 = ADVANCED_FACE('',(#7272),#4499,.T.);+#7272 = FACE_BOUND('',#7273,.T.);+#7273 = EDGE_LOOP('',(#7274,#7275,#7276,#7277));+#7274 = ORIENTED_EDGE('',*,*,#4479,.T.);+#7275 = ORIENTED_EDGE('',*,*,#7251,.T.);+#7276 = ORIENTED_EDGE('',*,*,#6789,.T.);+#7277 = ORIENTED_EDGE('',*,*,#7278,.F.);+#7278 = EDGE_CURVE('',#4444,#6790,#7279,.T.);+#7279 = SURFACE_CURVE('',#7280,(#7284,#7291),.PCURVE_S1.);+#7280 = LINE('',#7281,#7282);+#7281 = CARTESIAN_POINT('',(-3.104078096857E-02,-0.178996584672,+ 1.8000001));+#7282 = VECTOR('',#7283,1.);+#7283 = DIRECTION('',(-0.,-0.,-1.));+#7284 = PCURVE('',#4499,#7285);+#7285 = DEFINITIONAL_REPRESENTATION('',(#7286),#7290);+#7286 = LINE('',#7287,#7288);+#7287 = CARTESIAN_POINT('',(1.,0.));+#7288 = VECTOR('',#7289,1.);+#7289 = DIRECTION('',(0.,-1.));+#7290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7291 = PCURVE('',#4463,#7292);+#7292 = DEFINITIONAL_REPRESENTATION('',(#7293),#7297);+#7293 = LINE('',#7294,#7295);+#7294 = CARTESIAN_POINT('',(0.,0.));+#7295 = VECTOR('',#7296,1.);+#7296 = DIRECTION('',(0.,-1.));+#7297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7298 = ADVANCED_FACE('',(#7299),#4463,.T.);+#7299 = FACE_BOUND('',#7300,.T.);+#7300 = EDGE_LOOP('',(#7301,#7302,#7303,#7304));+#7301 = ORIENTED_EDGE('',*,*,#4443,.T.);+#7302 = ORIENTED_EDGE('',*,*,#7278,.T.);+#7303 = ORIENTED_EDGE('',*,*,#6812,.T.);+#7304 = ORIENTED_EDGE('',*,*,#7305,.F.);+#7305 = EDGE_CURVE('',#4408,#6813,#7306,.T.);+#7306 = SURFACE_CURVE('',#7307,(#7311,#7318),.PCURVE_S1.);+#7307 = LINE('',#7308,#7309);+#7308 = CARTESIAN_POINT('',(5.010643831475E-02,-0.151264719441,1.8000001+ ));+#7309 = VECTOR('',#7310,1.);+#7310 = DIRECTION('',(-0.,-0.,-1.));+#7311 = PCURVE('',#4463,#7312);+#7312 = DEFINITIONAL_REPRESENTATION('',(#7313),#7317);+#7313 = LINE('',#7314,#7315);+#7314 = CARTESIAN_POINT('',(1.,0.));+#7315 = VECTOR('',#7316,1.);+#7316 = DIRECTION('',(0.,-1.));+#7317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7318 = PCURVE('',#4427,#7319);+#7319 = DEFINITIONAL_REPRESENTATION('',(#7320),#7324);+#7320 = LINE('',#7321,#7322);+#7321 = CARTESIAN_POINT('',(0.,0.));+#7322 = VECTOR('',#7323,1.);+#7323 = DIRECTION('',(0.,-1.));+#7324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7325 = ADVANCED_FACE('',(#7326),#4427,.T.);+#7326 = FACE_BOUND('',#7327,.T.);+#7327 = EDGE_LOOP('',(#7328,#7329,#7330,#7331));+#7328 = ORIENTED_EDGE('',*,*,#4407,.T.);+#7329 = ORIENTED_EDGE('',*,*,#7305,.T.);+#7330 = ORIENTED_EDGE('',*,*,#6835,.T.);+#7331 = ORIENTED_EDGE('',*,*,#7332,.F.);+#7332 = EDGE_CURVE('',#4363,#6836,#7333,.T.);+#7333 = SURFACE_CURVE('',#7334,(#7338,#7345),.PCURVE_S1.);+#7334 = LINE('',#7335,#7336);+#7335 = CARTESIAN_POINT('',(7.862614062597E-02,-7.248101139869E-02,+ 1.8000001));+#7336 = VECTOR('',#7337,1.);+#7337 = DIRECTION('',(-0.,-0.,-1.));+#7338 = PCURVE('',#4427,#7339);+#7339 = DEFINITIONAL_REPRESENTATION('',(#7340),#7344);+#7340 = LINE('',#7341,#7342);+#7341 = CARTESIAN_POINT('',(1.,0.));+#7342 = VECTOR('',#7343,1.);+#7343 = DIRECTION('',(0.,-1.));+#7344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7345 = PCURVE('',#4388,#7346);+#7346 = DEFINITIONAL_REPRESENTATION('',(#7347),#7351);+#7347 = LINE('',#7348,#7349);+#7348 = CARTESIAN_POINT('',(0.,0.));+#7349 = VECTOR('',#7350,1.);+#7350 = DIRECTION('',(0.,-1.));+#7351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7352 = ADVANCED_FACE('',(#7353),#4388,.T.);+#7353 = FACE_BOUND('',#7354,.T.);+#7354 = EDGE_LOOP('',(#7355,#7356,#7357,#7358));+#7355 = ORIENTED_EDGE('',*,*,#4362,.T.);+#7356 = ORIENTED_EDGE('',*,*,#7332,.T.);+#7357 = ORIENTED_EDGE('',*,*,#6858,.T.);+#7358 = ORIENTED_EDGE('',*,*,#7359,.F.);+#7359 = EDGE_CURVE('',#4327,#6859,#7360,.T.);+#7360 = SURFACE_CURVE('',#7361,(#7365,#7372),.PCURVE_S1.);+#7361 = LINE('',#7362,#7363);+#7362 = CARTESIAN_POINT('',(4.916103381824E-02,5.987561811196E-03,+ 1.8000001));+#7363 = VECTOR('',#7364,1.);+#7364 = DIRECTION('',(-0.,-0.,-1.));+#7365 = PCURVE('',#4388,#7366);+#7366 = DEFINITIONAL_REPRESENTATION('',(#7367),#7371);+#7367 = LINE('',#7368,#7369);+#7368 = CARTESIAN_POINT('',(1.,0.));+#7369 = VECTOR('',#7370,1.);+#7370 = DIRECTION('',(0.,-1.));+#7371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7372 = PCURVE('',#4346,#7373);+#7373 = DEFINITIONAL_REPRESENTATION('',(#7374),#7378);+#7374 = LINE('',#7375,#7376);+#7375 = CARTESIAN_POINT('',(0.,0.));+#7376 = VECTOR('',#7377,1.);+#7377 = DIRECTION('',(0.,-1.));+#7378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7379 = ADVANCED_FACE('',(#7380),#4346,.T.);+#7380 = FACE_BOUND('',#7381,.T.);+#7381 = EDGE_LOOP('',(#7382,#7383,#7384,#7385));+#7382 = ORIENTED_EDGE('',*,*,#4326,.T.);+#7383 = ORIENTED_EDGE('',*,*,#7359,.T.);+#7384 = ORIENTED_EDGE('',*,*,#6881,.T.);+#7385 = ORIENTED_EDGE('',*,*,#7386,.F.);+#7386 = EDGE_CURVE('',#4291,#6882,#7387,.T.);+#7387 = SURFACE_CURVE('',#7388,(#7392,#7399),.PCURVE_S1.);+#7388 = LINE('',#7389,#7390);+#7389 = CARTESIAN_POINT('',(-3.293158996158E-02,3.403456187417E-02,+ 1.8000001));+#7390 = VECTOR('',#7391,1.);+#7391 = DIRECTION('',(-0.,-0.,-1.));+#7392 = PCURVE('',#4346,#7393);+#7393 = DEFINITIONAL_REPRESENTATION('',(#7394),#7398);+#7394 = LINE('',#7395,#7396);+#7395 = CARTESIAN_POINT('',(1.,0.));+#7396 = VECTOR('',#7397,1.);+#7397 = DIRECTION('',(0.,-1.));+#7398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7399 = PCURVE('',#4310,#7400);+#7400 = DEFINITIONAL_REPRESENTATION('',(#7401),#7405);+#7401 = LINE('',#7402,#7403);+#7402 = CARTESIAN_POINT('',(0.,0.));+#7403 = VECTOR('',#7404,1.);+#7404 = DIRECTION('',(0.,-1.));+#7405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7406 = ADVANCED_FACE('',(#7407),#4310,.T.);+#7407 = FACE_BOUND('',#7408,.T.);+#7408 = EDGE_LOOP('',(#7409,#7410,#7411,#7412));+#7409 = ORIENTED_EDGE('',*,*,#4290,.T.);+#7410 = ORIENTED_EDGE('',*,*,#7386,.T.);+#7411 = ORIENTED_EDGE('',*,*,#6904,.T.);+#7412 = ORIENTED_EDGE('',*,*,#7413,.F.);+#7413 = EDGE_CURVE('',#4255,#6905,#7414,.T.);+#7414 = SURFACE_CURVE('',#7415,(#7419,#7426),.PCURVE_S1.);+#7415 = LINE('',#7416,#7417);+#7416 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747906E-02,+ 1.8000001));+#7417 = VECTOR('',#7418,1.);+#7418 = DIRECTION('',(-0.,-0.,-1.));+#7419 = PCURVE('',#4310,#7420);+#7420 = DEFINITIONAL_REPRESENTATION('',(#7421),#7425);+#7421 = LINE('',#7422,#7423);+#7422 = CARTESIAN_POINT('',(1.,0.));+#7423 = VECTOR('',#7424,1.);+#7424 = DIRECTION('',(0.,-1.));+#7425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7426 = PCURVE('',#4274,#7427);+#7427 = DEFINITIONAL_REPRESENTATION('',(#7428),#7432);+#7428 = LINE('',#7429,#7430);+#7429 = CARTESIAN_POINT('',(0.,0.));+#7430 = VECTOR('',#7431,1.);+#7431 = DIRECTION('',(0.,-1.));+#7432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7433 = ADVANCED_FACE('',(#7434),#4274,.T.);+#7434 = FACE_BOUND('',#7435,.T.);+#7435 = EDGE_LOOP('',(#7436,#7437,#7438,#7439));+#7436 = ORIENTED_EDGE('',*,*,#4254,.T.);+#7437 = ORIENTED_EDGE('',*,*,#7413,.T.);+#7438 = ORIENTED_EDGE('',*,*,#6927,.T.);+#7439 = ORIENTED_EDGE('',*,*,#7440,.F.);+#7440 = EDGE_CURVE('',#4228,#6467,#7441,.T.);+#7441 = SURFACE_CURVE('',#7442,(#7446,#7453),.PCURVE_S1.);+#7442 = LINE('',#7443,#7444);+#7443 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,1.8000001+ ));+#7444 = VECTOR('',#7445,1.);+#7445 = DIRECTION('',(-0.,-0.,-1.));+#7446 = PCURVE('',#4274,#7447);+#7447 = DEFINITIONAL_REPRESENTATION('',(#7448),#7452);+#7448 = LINE('',#7449,#7450);+#7449 = CARTESIAN_POINT('',(1.,0.));+#7450 = VECTOR('',#7451,1.);+#7451 = DIRECTION('',(0.,-1.));+#7452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7453 = PCURVE('',#4243,#7454);+#7454 = DEFINITIONAL_REPRESENTATION('',(#7455),#7459);+#7455 = LINE('',#7456,#7457);+#7456 = CARTESIAN_POINT('',(0.,0.));+#7457 = VECTOR('',#7458,1.);+#7458 = DIRECTION('',(0.,-1.));+#7459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7460 = ADVANCED_FACE('',(#7461),#4243,.T.);+#7461 = FACE_BOUND('',#7462,.T.);+#7462 = EDGE_LOOP('',(#7463,#7464,#7465,#7466));+#7463 = ORIENTED_EDGE('',*,*,#4227,.T.);+#7464 = ORIENTED_EDGE('',*,*,#7440,.T.);+#7465 = ORIENTED_EDGE('',*,*,#6466,.T.);+#7466 = ORIENTED_EDGE('',*,*,#7467,.F.);+#7467 = EDGE_CURVE('',#4201,#6469,#7468,.T.);+#7468 = SURFACE_CURVE('',#7469,(#7473,#7480),.PCURVE_S1.);+#7469 = LINE('',#7470,#7471);+#7470 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.8000001));+#7471 = VECTOR('',#7472,1.);+#7472 = DIRECTION('',(-0.,-0.,-1.));+#7473 = PCURVE('',#4243,#7474);+#7474 = DEFINITIONAL_REPRESENTATION('',(#7475),#7479);+#7475 = LINE('',#7476,#7477);+#7476 = CARTESIAN_POINT('',(0.236351124126,0.));+#7477 = VECTOR('',#7478,1.);+#7478 = DIRECTION('',(0.,-1.));+#7479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7480 = PCURVE('',#4216,#7481);+#7481 = DEFINITIONAL_REPRESENTATION('',(#7482),#7486);+#7482 = LINE('',#7483,#7484);+#7483 = CARTESIAN_POINT('',(0.,0.));+#7484 = VECTOR('',#7485,1.);+#7485 = DIRECTION('',(0.,-1.));+#7486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7487 = ADVANCED_FACE('',(#7488),#4216,.T.);+#7488 = FACE_BOUND('',#7489,.T.);+#7489 = EDGE_LOOP('',(#7490,#7491,#7492,#7493));+#7490 = ORIENTED_EDGE('',*,*,#4198,.T.);+#7491 = ORIENTED_EDGE('',*,*,#7467,.T.);+#7492 = ORIENTED_EDGE('',*,*,#6491,.T.);+#7493 = ORIENTED_EDGE('',*,*,#6391,.F.);+#7494 = ADVANCED_FACE('',(#7495),#4185,.T.);+#7495 = FACE_BOUND('',#7496,.T.);+#7496 = EDGE_LOOP('',(#7497,#7498,#7521,#7549));+#7497 = ORIENTED_EDGE('',*,*,#4171,.T.);+#7498 = ORIENTED_EDGE('',*,*,#7499,.T.);+#7499 = EDGE_CURVE('',#3414,#7500,#7502,.T.);+#7500 = VERTEX_POINT('',#7501);+#7501 = CARTESIAN_POINT('',(0.49775546741,0.24706570842,1.7000001));+#7502 = SURFACE_CURVE('',#7503,(#7507,#7514),.PCURVE_S1.);+#7503 = LINE('',#7504,#7505);+#7504 = CARTESIAN_POINT('',(0.49775546741,0.24706570842,1.8000001));+#7505 = VECTOR('',#7506,1.);+#7506 = DIRECTION('',(-0.,-0.,-1.));+#7507 = PCURVE('',#4185,#7508);+#7508 = DEFINITIONAL_REPRESENTATION('',(#7509),#7513);+#7509 = LINE('',#7510,#7511);+#7510 = CARTESIAN_POINT('',(0.,0.));+#7511 = VECTOR('',#7512,1.);+#7512 = DIRECTION('',(0.,-1.));+#7513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7514 = PCURVE('',#3431,#7515);+#7515 = DEFINITIONAL_REPRESENTATION('',(#7516),#7520);+#7516 = LINE('',#7517,#7518);+#7517 = CARTESIAN_POINT('',(0.238241933119,0.));+#7518 = VECTOR('',#7519,1.);+#7519 = DIRECTION('',(0.,-1.));+#7520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7521 = ORIENTED_EDGE('',*,*,#7522,.T.);+#7522 = EDGE_CURVE('',#7500,#7523,#7525,.T.);+#7523 = VERTEX_POINT('',#7524);+#7524 = CARTESIAN_POINT('',(0.49775546741,0.193492786951,1.7000001));+#7525 = SURFACE_CURVE('',#7526,(#7530,#7537),.PCURVE_S1.);+#7526 = LINE('',#7527,#7528);+#7527 = CARTESIAN_POINT('',(0.49775546741,0.24706570842,1.7000001));+#7528 = VECTOR('',#7529,1.);+#7529 = DIRECTION('',(0.,-1.,0.));+#7530 = PCURVE('',#4185,#7531);+#7531 = DEFINITIONAL_REPRESENTATION('',(#7532),#7536);+#7532 = LINE('',#7533,#7534);+#7533 = CARTESIAN_POINT('',(0.,-0.1));+#7534 = VECTOR('',#7535,1.);+#7535 = DIRECTION('',(1.,0.));+#7536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7537 = PCURVE('',#7538,#7543);+#7538 = PLANE('',#7539);+#7539 = AXIS2_PLACEMENT_3D('',#7540,#7541,#7542);+#7540 = CARTESIAN_POINT('',(0.194280624032,-0.223430596007,1.7000001));+#7541 = DIRECTION('',(0.,0.,1.));+#7542 = DIRECTION('',(1.,0.,0.));+#7543 = DEFINITIONAL_REPRESENTATION('',(#7544),#7548);+#7544 = LINE('',#7545,#7546);+#7545 = CARTESIAN_POINT('',(0.303474843378,0.470496304427));+#7546 = VECTOR('',#7547,1.);+#7547 = DIRECTION('',(0.,-1.));+#7548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7549 = ORIENTED_EDGE('',*,*,#7550,.F.);+#7550 = EDGE_CURVE('',#4145,#7523,#7551,.T.);+#7551 = SURFACE_CURVE('',#7552,(#7556,#7563),.PCURVE_S1.);+#7552 = LINE('',#7553,#7554);+#7553 = CARTESIAN_POINT('',(0.49775546741,0.193492786951,1.8000001));+#7554 = VECTOR('',#7555,1.);+#7555 = DIRECTION('',(-0.,-0.,-1.));+#7556 = PCURVE('',#4185,#7557);+#7557 = DEFINITIONAL_REPRESENTATION('',(#7558),#7562);+#7558 = LINE('',#7559,#7560);+#7559 = CARTESIAN_POINT('',(5.35729214686E-02,0.));+#7560 = VECTOR('',#7561,1.);+#7561 = DIRECTION('',(0.,-1.));+#7562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7563 = PCURVE('',#4160,#7564);+#7564 = DEFINITIONAL_REPRESENTATION('',(#7565),#7569);+#7565 = LINE('',#7566,#7567);+#7566 = CARTESIAN_POINT('',(0.,0.));+#7567 = VECTOR('',#7568,1.);+#7568 = DIRECTION('',(0.,-1.));+#7569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7570 = ADVANCED_FACE('',(#7571),#7538,.T.);+#7571 = FACE_BOUND('',#7572,.F.);+#7572 = EDGE_LOOP('',(#7573,#7598,#7619,#7620,#7643,#7666,#7689,#7712,+ #7735,#7758,#7781,#7804,#7827,#7850,#7873,#7896,#7919,#7942,#7965,+ #7988,#8011,#8034));+#7573 = ORIENTED_EDGE('',*,*,#7574,.T.);+#7574 = EDGE_CURVE('',#7575,#7577,#7579,.T.);+#7575 = VERTEX_POINT('',#7576);+#7576 = CARTESIAN_POINT('',(0.259513534291,1.071458429372E-02,1.7000001)+ );+#7577 = VERTEX_POINT('',#7578);+#7578 = CARTESIAN_POINT('',(0.259513534291,0.24706570842,1.7000001));+#7579 = SURFACE_CURVE('',#7580,(#7584,#7591),.PCURVE_S1.);+#7580 = LINE('',#7581,#7582);+#7581 = CARTESIAN_POINT('',(0.259513534291,1.071458429372E-02,1.7000001)+ );+#7582 = VECTOR('',#7583,1.);+#7583 = DIRECTION('',(0.,1.,0.));+#7584 = PCURVE('',#7538,#7585);+#7585 = DEFINITIONAL_REPRESENTATION('',(#7586),#7590);+#7586 = LINE('',#7587,#7588);+#7587 = CARTESIAN_POINT('',(6.523291025882E-02,0.234145180301));+#7588 = VECTOR('',#7589,1.);+#7589 = DIRECTION('',(0.,1.));+#7590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7591 = PCURVE('',#3458,#7592);+#7592 = DEFINITIONAL_REPRESENTATION('',(#7593),#7597);+#7593 = LINE('',#7594,#7595);+#7594 = CARTESIAN_POINT('',(0.,-0.1));+#7595 = VECTOR('',#7596,1.);+#7596 = DIRECTION('',(1.,0.));+#7597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7598 = ORIENTED_EDGE('',*,*,#7599,.T.);+#7599 = EDGE_CURVE('',#7577,#7500,#7600,.T.);+#7600 = SURFACE_CURVE('',#7601,(#7605,#7612),.PCURVE_S1.);+#7601 = LINE('',#7602,#7603);+#7602 = CARTESIAN_POINT('',(0.259513534291,0.24706570842,1.7000001));+#7603 = VECTOR('',#7604,1.);+#7604 = DIRECTION('',(1.,0.,0.));+#7605 = PCURVE('',#7538,#7606);+#7606 = DEFINITIONAL_REPRESENTATION('',(#7607),#7611);+#7607 = LINE('',#7608,#7609);+#7608 = CARTESIAN_POINT('',(6.523291025882E-02,0.470496304427));+#7609 = VECTOR('',#7610,1.);+#7610 = DIRECTION('',(1.,0.));+#7611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7612 = PCURVE('',#3431,#7613);+#7613 = DEFINITIONAL_REPRESENTATION('',(#7614),#7618);+#7614 = LINE('',#7615,#7616);+#7615 = CARTESIAN_POINT('',(0.,-0.1));+#7616 = VECTOR('',#7617,1.);+#7617 = DIRECTION('',(1.,0.));+#7618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7619 = ORIENTED_EDGE('',*,*,#7522,.T.);+#7620 = ORIENTED_EDGE('',*,*,#7621,.T.);+#7621 = EDGE_CURVE('',#7523,#7622,#7624,.T.);+#7622 = VERTEX_POINT('',#7623);+#7623 = CARTESIAN_POINT('',(0.317498343409,0.193492786951,1.7000001));+#7624 = SURFACE_CURVE('',#7625,(#7629,#7636),.PCURVE_S1.);+#7625 = LINE('',#7626,#7627);+#7626 = CARTESIAN_POINT('',(0.49775546741,0.193492786951,1.7000001));+#7627 = VECTOR('',#7628,1.);+#7628 = DIRECTION('',(-1.,0.,0.));+#7629 = PCURVE('',#7538,#7630);+#7630 = DEFINITIONAL_REPRESENTATION('',(#7631),#7635);+#7631 = LINE('',#7632,#7633);+#7632 = CARTESIAN_POINT('',(0.303474843378,0.416923382959));+#7633 = VECTOR('',#7634,1.);+#7634 = DIRECTION('',(-1.,0.));+#7635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7636 = PCURVE('',#4160,#7637);+#7637 = DEFINITIONAL_REPRESENTATION('',(#7638),#7642);+#7638 = LINE('',#7639,#7640);+#7639 = CARTESIAN_POINT('',(0.,-0.1));+#7640 = VECTOR('',#7641,1.);+#7641 = DIRECTION('',(1.,0.));+#7642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7643 = ORIENTED_EDGE('',*,*,#7644,.T.);+#7644 = EDGE_CURVE('',#7622,#7645,#7647,.T.);+#7645 = VERTEX_POINT('',#7646);+#7646 = CARTESIAN_POINT('',(0.317498343409,7.783830354555E-02,1.7000001)+ );+#7647 = SURFACE_CURVE('',#7648,(#7652,#7659),.PCURVE_S1.);+#7648 = LINE('',#7649,#7650);+#7649 = CARTESIAN_POINT('',(0.317498343409,0.193492786951,1.7000001));+#7650 = VECTOR('',#7651,1.);+#7651 = DIRECTION('',(0.,-1.,0.));+#7652 = PCURVE('',#7538,#7653);+#7653 = DEFINITIONAL_REPRESENTATION('',(#7654),#7658);+#7654 = LINE('',#7655,#7656);+#7655 = CARTESIAN_POINT('',(0.123217719378,0.416923382959));+#7656 = VECTOR('',#7657,1.);+#7657 = DIRECTION('',(0.,-1.));+#7658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7659 = PCURVE('',#4133,#7660);+#7660 = DEFINITIONAL_REPRESENTATION('',(#7661),#7665);+#7661 = LINE('',#7662,#7663);+#7662 = CARTESIAN_POINT('',(0.,-0.1));+#7663 = VECTOR('',#7664,1.);+#7664 = DIRECTION('',(1.,0.));+#7665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7666 = ORIENTED_EDGE('',*,*,#7667,.T.);+#7667 = EDGE_CURVE('',#7645,#7668,#7670,.T.);+#7668 = VERTEX_POINT('',#7669);+#7669 = CARTESIAN_POINT('',(0.344757506392,8.52439721015E-02,1.7000001)+ );+#7670 = SURFACE_CURVE('',#7671,(#7675,#7682),.PCURVE_S1.);+#7671 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7672,#7673,#7674),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7672 = CARTESIAN_POINT('',(0.317498343409,7.783830354555E-02,1.7000001)+ );+#7673 = CARTESIAN_POINT('',(0.331049141193,8.288046086024E-02,1.7000001)+ );+#7674 = CARTESIAN_POINT('',(0.344757506392,8.52439721015E-02,1.7000001)+ );+#7675 = PCURVE('',#7538,#7676);+#7676 = DEFINITIONAL_REPRESENTATION('',(#7677),#7681);+#7677 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7678,#7679,#7680),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7678 = CARTESIAN_POINT('',(0.123217719378,0.301268899553));+#7679 = CARTESIAN_POINT('',(0.136768517161,0.306311056868));+#7680 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#7681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7682 = PCURVE('',#4101,#7683);+#7683 = DEFINITIONAL_REPRESENTATION('',(#7684),#7688);+#7684 = LINE('',#7685,#7686);+#7685 = CARTESIAN_POINT('',(0.,-0.1));+#7686 = VECTOR('',#7687,1.);+#7687 = DIRECTION('',(1.,0.));+#7688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7689 = ORIENTED_EDGE('',*,*,#7690,.T.);+#7690 = EDGE_CURVE('',#7668,#7691,#7693,.T.);+#7691 = VERTEX_POINT('',#7692);+#7692 = CARTESIAN_POINT('',(0.372331804207,8.760748334276E-02,1.7000001)+ );+#7693 = SURFACE_CURVE('',#7694,(#7698,#7705),.PCURVE_S1.);+#7694 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7695,#7696,#7697),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7695 = CARTESIAN_POINT('',(0.344757506392,8.52439721015E-02,1.7000001)+ );+#7696 = CARTESIAN_POINT('',(0.358465871591,8.760748334276E-02,1.7000001)+ );+#7697 = CARTESIAN_POINT('',(0.372331804207,8.760748334276E-02,1.7000001)+ );+#7698 = PCURVE('',#7538,#7699);+#7699 = DEFINITIONAL_REPRESENTATION('',(#7700),#7704);+#7700 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7701,#7702,#7703),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7701 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#7702 = CARTESIAN_POINT('',(0.16418524756,0.31103807935));+#7703 = CARTESIAN_POINT('',(0.178051180175,0.31103807935));+#7704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7705 = PCURVE('',#4065,#7706);+#7706 = DEFINITIONAL_REPRESENTATION('',(#7707),#7711);+#7707 = LINE('',#7708,#7709);+#7708 = CARTESIAN_POINT('',(0.,-0.1));+#7709 = VECTOR('',#7710,1.);+#7710 = DIRECTION('',(1.,0.));+#7711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7712 = ORIENTED_EDGE('',*,*,#7713,.T.);+#7713 = EDGE_CURVE('',#7691,#7714,#7716,.T.);+#7714 = VERTEX_POINT('',#7715);+#7715 = CARTESIAN_POINT('',(0.488301422445,4.443401133572E-02,1.7000001)+ );+#7716 = SURFACE_CURVE('',#7717,(#7721,#7728),.PCURVE_S1.);+#7717 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7718,#7719,#7720),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7718 = CARTESIAN_POINT('',(0.372331804207,8.760748334276E-02,1.7000001)+ );+#7719 = CARTESIAN_POINT('',(0.44544308527,8.760748334276E-02,1.7000001)+ );+#7720 = CARTESIAN_POINT('',(0.488301422445,4.443401133572E-02,1.7000001)+ );+#7721 = PCURVE('',#7538,#7722);+#7722 = DEFINITIONAL_REPRESENTATION('',(#7723),#7727);+#7723 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7724,#7725,#7726),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7724 = CARTESIAN_POINT('',(0.178051180175,0.31103807935));+#7725 = CARTESIAN_POINT('',(0.251162461238,0.31103807935));+#7726 = CARTESIAN_POINT('',(0.294020798413,0.267864607343));+#7727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7728 = PCURVE('',#4026,#7729);+#7729 = DEFINITIONAL_REPRESENTATION('',(#7730),#7734);+#7730 = LINE('',#7731,#7732);+#7731 = CARTESIAN_POINT('',(0.,-0.1));+#7732 = VECTOR('',#7733,1.);+#7733 = DIRECTION('',(1.,0.));+#7734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7735 = ORIENTED_EDGE('',*,*,#7736,.T.);+#7736 = EDGE_CURVE('',#7714,#7737,#7739,.T.);+#7737 = VERTEX_POINT('',#7738);+#7738 = CARTESIAN_POINT('',(0.53115975962,-7.248101139869E-02,1.7000001)+ );+#7739 = SURFACE_CURVE('',#7740,(#7744,#7751),.PCURVE_S1.);+#7740 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7741,#7742,#7743),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7741 = CARTESIAN_POINT('',(0.488301422445,4.443401133572E-02,1.7000001)+ );+#7742 = CARTESIAN_POINT('',(0.53115975962,1.260539328673E-03,1.7000001)+ );+#7743 = CARTESIAN_POINT('',(0.53115975962,-7.248101139869E-02,1.7000001)+ );+#7744 = PCURVE('',#7538,#7745);+#7745 = DEFINITIONAL_REPRESENTATION('',(#7746),#7750);+#7746 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7747,#7748,#7749),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7747 = CARTESIAN_POINT('',(0.294020798413,0.267864607343));+#7748 = CARTESIAN_POINT('',(0.336879135588,0.224691135336));+#7749 = CARTESIAN_POINT('',(0.336879135588,0.150949584609));+#7750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7751 = PCURVE('',#3981,#7752);+#7752 = DEFINITIONAL_REPRESENTATION('',(#7753),#7757);+#7753 = LINE('',#7754,#7755);+#7754 = CARTESIAN_POINT('',(0.,-0.1));+#7755 = VECTOR('',#7756,1.);+#7756 = DIRECTION('',(1.,0.));+#7757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7758 = ORIENTED_EDGE('',*,*,#7759,.T.);+#7759 = EDGE_CURVE('',#7737,#7760,#7762,.T.);+#7760 = VERTEX_POINT('',#7761);+#7761 = CARTESIAN_POINT('',(0.486253046036,-0.189711168965,1.7000001));+#7762 = SURFACE_CURVE('',#7763,(#7767,#7774),.PCURVE_S1.);+#7763 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7764,#7765,#7766),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7764 = CARTESIAN_POINT('',(0.53115975962,-7.248101139869E-02,1.7000001)+ );+#7765 = CARTESIAN_POINT('',(0.53115975962,-0.14685283179,1.7000001));+#7766 = CARTESIAN_POINT('',(0.486253046036,-0.189711168965,1.7000001));+#7767 = PCURVE('',#7538,#7768);+#7768 = DEFINITIONAL_REPRESENTATION('',(#7769),#7773);+#7769 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7770,#7771,#7772),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7770 = CARTESIAN_POINT('',(0.336879135588,0.150949584609));+#7771 = CARTESIAN_POINT('',(0.336879135588,7.657776421688E-02));+#7772 = CARTESIAN_POINT('',(0.291972422004,3.3719427042E-02));+#7773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7774 = PCURVE('',#3936,#7775);+#7775 = DEFINITIONAL_REPRESENTATION('',(#7776),#7780);+#7776 = LINE('',#7777,#7778);+#7777 = CARTESIAN_POINT('',(0.,-0.1));+#7778 = VECTOR('',#7779,1.);+#7779 = DIRECTION('',(1.,0.));+#7780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7781 = ORIENTED_EDGE('',*,*,#7782,.T.);+#7782 = EDGE_CURVE('',#7760,#7783,#7785,.T.);+#7783 = VERTEX_POINT('',#7784);+#7784 = CARTESIAN_POINT('',(0.363508028906,-0.23256950614,1.7000001));+#7785 = SURFACE_CURVE('',#7786,(#7790,#7797),.PCURVE_S1.);+#7786 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7787,#7788,#7789),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7787 = CARTESIAN_POINT('',(0.486253046036,-0.189711168965,1.7000001));+#7788 = CARTESIAN_POINT('',(0.441346332452,-0.23256950614,1.7000001));+#7789 = CARTESIAN_POINT('',(0.363508028906,-0.23256950614,1.7000001));+#7790 = PCURVE('',#7538,#7791);+#7791 = DEFINITIONAL_REPRESENTATION('',(#7792),#7796);+#7792 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7793,#7794,#7795),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7793 = CARTESIAN_POINT('',(0.291972422004,3.3719427042E-02));+#7794 = CARTESIAN_POINT('',(0.24706570842,-9.138910132878E-03));+#7795 = CARTESIAN_POINT('',(0.169227404874,-9.138910132878E-03));+#7796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7797 = PCURVE('',#3891,#7798);+#7798 = DEFINITIONAL_REPRESENTATION('',(#7799),#7803);+#7799 = LINE('',#7800,#7801);+#7800 = CARTESIAN_POINT('',(0.,-0.1));+#7801 = VECTOR('',#7802,1.);+#7802 = DIRECTION('',(1.,0.));+#7803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7804 = ORIENTED_EDGE('',*,*,#7805,.T.);+#7805 = EDGE_CURVE('',#7783,#7806,#7808,.T.);+#7806 = VERTEX_POINT('',#7807);+#7807 = CARTESIAN_POINT('',(0.294966202909,-0.227527348825,1.7000001));+#7808 = SURFACE_CURVE('',#7809,(#7813,#7820),.PCURVE_S1.);+#7809 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7810,#7811,#7812),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7810 = CARTESIAN_POINT('',(0.363508028906,-0.23256950614,1.7000001));+#7811 = CARTESIAN_POINT('',(0.326006983878,-0.23256950614,1.7000001));+#7812 = CARTESIAN_POINT('',(0.294966202909,-0.227527348825,1.7000001));+#7813 = PCURVE('',#7538,#7814);+#7814 = DEFINITIONAL_REPRESENTATION('',(#7815),#7819);+#7815 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7816,#7817,#7818),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7816 = CARTESIAN_POINT('',(0.169227404874,-9.138910132878E-03));+#7817 = CARTESIAN_POINT('',(0.131726359846,-9.138910132878E-03));+#7818 = CARTESIAN_POINT('',(0.100685578878,-4.096752818187E-03));+#7819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7820 = PCURVE('',#3849,#7821);+#7821 = DEFINITIONAL_REPRESENTATION('',(#7822),#7826);+#7822 = LINE('',#7823,#7824);+#7823 = CARTESIAN_POINT('',(0.,-0.1));+#7824 = VECTOR('',#7825,1.);+#7825 = DIRECTION('',(1.,0.));+#7826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7827 = ORIENTED_EDGE('',*,*,#7828,.T.);+#7828 = EDGE_CURVE('',#7806,#7829,#7831,.T.);+#7829 = VERTEX_POINT('',#7830);+#7830 = CARTESIAN_POINT('',(0.239344905032,-0.212400876881,1.7000001));+#7831 = SURFACE_CURVE('',#7832,(#7836,#7843),.PCURVE_S1.);+#7832 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7833,#7834,#7835),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7833 = CARTESIAN_POINT('',(0.294966202909,-0.227527348825,1.7000001));+#7834 = CARTESIAN_POINT('',(0.263925421941,-0.222485191511,1.7000001));+#7835 = CARTESIAN_POINT('',(0.239344905032,-0.212400876881,1.7000001));+#7836 = PCURVE('',#7538,#7837);+#7837 = DEFINITIONAL_REPRESENTATION('',(#7838),#7842);+#7838 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7839,#7840,#7841),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7839 = CARTESIAN_POINT('',(0.100685578878,-4.096752818187E-03));+#7840 = CARTESIAN_POINT('',(6.964479790918E-02,9.454044965046E-04));+#7841 = CARTESIAN_POINT('',(4.506428100005E-02,1.102971912589E-02));+#7842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7843 = PCURVE('',#3813,#7844);+#7844 = DEFINITIONAL_REPRESENTATION('',(#7845),#7849);+#7845 = LINE('',#7846,#7847);+#7846 = CARTESIAN_POINT('',(0.,-0.1));+#7847 = VECTOR('',#7848,1.);+#7848 = DIRECTION('',(1.,0.));+#7849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7850 = ORIENTED_EDGE('',*,*,#7851,.T.);+#7851 = EDGE_CURVE('',#7829,#7852,#7854,.T.);+#7852 = VERTEX_POINT('',#7853);+#7853 = CARTESIAN_POINT('',(0.239344905032,-0.147798236287,1.7000001));+#7854 = SURFACE_CURVE('',#7855,(#7859,#7866),.PCURVE_S1.);+#7855 = LINE('',#7856,#7857);+#7856 = CARTESIAN_POINT('',(0.239344905032,-0.212400876881,1.7000001));+#7857 = VECTOR('',#7858,1.);+#7858 = DIRECTION('',(0.,1.,0.));+#7859 = PCURVE('',#7538,#7860);+#7860 = DEFINITIONAL_REPRESENTATION('',(#7861),#7865);+#7861 = LINE('',#7862,#7863);+#7862 = CARTESIAN_POINT('',(4.506428100005E-02,1.102971912589E-02));+#7863 = VECTOR('',#7864,1.);+#7864 = DIRECTION('',(0.,1.));+#7865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7866 = PCURVE('',#3782,#7867);+#7867 = DEFINITIONAL_REPRESENTATION('',(#7868),#7872);+#7868 = LINE('',#7869,#7870);+#7869 = CARTESIAN_POINT('',(0.,-0.1));+#7870 = VECTOR('',#7871,1.);+#7871 = DIRECTION('',(1.,0.));+#7872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7873 = ORIENTED_EDGE('',*,*,#7874,.T.);+#7874 = EDGE_CURVE('',#7852,#7875,#7877,.T.);+#7875 = VERTEX_POINT('',#7876);+#7876 = CARTESIAN_POINT('',(0.297644848983,-0.171275781283,1.7000001));+#7877 = SURFACE_CURVE('',#7878,(#7882,#7889),.PCURVE_S1.);+#7878 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7879,#7880,#7881),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7879 = CARTESIAN_POINT('',(0.239344905032,-0.147798236287,1.7000001));+#7880 = CARTESIAN_POINT('',(0.268337309591,-0.163554977895,1.7000001));+#7881 = CARTESIAN_POINT('',(0.297644848983,-0.171275781283,1.7000001));+#7882 = PCURVE('',#7538,#7883);+#7883 = DEFINITIONAL_REPRESENTATION('',(#7884),#7888);+#7884 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7885,#7886,#7887),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7885 = CARTESIAN_POINT('',(4.506428100005E-02,7.563235972037E-02));+#7886 = CARTESIAN_POINT('',(7.405668555953E-02,5.987561811196E-02));+#7887 = CARTESIAN_POINT('',(0.103364224951,5.215481472384E-02));+#7888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7889 = PCURVE('',#3750,#7890);+#7890 = DEFINITIONAL_REPRESENTATION('',(#7891),#7895);+#7891 = LINE('',#7892,#7893);+#7892 = CARTESIAN_POINT('',(0.,-0.1));+#7893 = VECTOR('',#7894,1.);+#7894 = DIRECTION('',(1.,0.));+#7895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7896 = ORIENTED_EDGE('',*,*,#7897,.T.);+#7897 = EDGE_CURVE('',#7875,#7898,#7900,.T.);+#7898 = VERTEX_POINT('',#7899);+#7899 = CARTESIAN_POINT('',(0.357520467095,-0.178996584672,1.7000001));+#7900 = SURFACE_CURVE('',#7901,(#7905,#7912),.PCURVE_S1.);+#7901 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7902,#7903,#7904),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7902 = CARTESIAN_POINT('',(0.297644848983,-0.171275781283,1.7000001));+#7903 = CARTESIAN_POINT('',(0.326952388375,-0.178996584672,1.7000001));+#7904 = CARTESIAN_POINT('',(0.357520467095,-0.178996584672,1.7000001));+#7905 = PCURVE('',#7538,#7906);+#7906 = DEFINITIONAL_REPRESENTATION('',(#7907),#7911);+#7907 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7908,#7909,#7910),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7908 = CARTESIAN_POINT('',(0.103364224951,5.215481472384E-02));+#7909 = CARTESIAN_POINT('',(0.132671764343,4.443401133572E-02));+#7910 = CARTESIAN_POINT('',(0.163239843063,4.443401133572E-02));+#7911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7912 = PCURVE('',#3714,#7913);+#7913 = DEFINITIONAL_REPRESENTATION('',(#7914),#7918);+#7914 = LINE('',#7915,#7916);+#7915 = CARTESIAN_POINT('',(0.,-0.1));+#7916 = VECTOR('',#7917,1.);+#7917 = DIRECTION('',(1.,0.));+#7918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7919 = ORIENTED_EDGE('',*,*,#7920,.T.);+#7920 = EDGE_CURVE('',#7898,#7921,#7923,.T.);+#7921 = VERTEX_POINT('',#7922);+#7922 = CARTESIAN_POINT('',(0.438667686378,-0.151264719441,1.7000001));+#7923 = SURFACE_CURVE('',#7924,(#7928,#7935),.PCURVE_S1.);+#7924 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7925,#7926,#7927),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7925 = CARTESIAN_POINT('',(0.357520467095,-0.178996584672,1.7000001));+#7926 = CARTESIAN_POINT('',(0.410147984067,-0.178996584672,1.7000001));+#7927 = CARTESIAN_POINT('',(0.438667686378,-0.151264719441,1.7000001));+#7928 = PCURVE('',#7538,#7929);+#7929 = DEFINITIONAL_REPRESENTATION('',(#7930),#7934);+#7930 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7931,#7932,#7933),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7931 = CARTESIAN_POINT('',(0.163239843063,4.443401133572E-02));+#7932 = CARTESIAN_POINT('',(0.215867360035,4.443401133572E-02));+#7933 = CARTESIAN_POINT('',(0.244387062346,7.216587656652E-02));+#7934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7935 = PCURVE('',#3678,#7936);+#7936 = DEFINITIONAL_REPRESENTATION('',(#7937),#7941);+#7937 = LINE('',#7938,#7939);+#7938 = CARTESIAN_POINT('',(0.,-0.1));+#7939 = VECTOR('',#7940,1.);+#7940 = DIRECTION('',(1.,0.));+#7941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7942 = ORIENTED_EDGE('',*,*,#7943,.T.);+#7943 = EDGE_CURVE('',#7921,#7944,#7946,.T.);+#7944 = VERTEX_POINT('',#7945);+#7945 = CARTESIAN_POINT('',(0.467187388689,-7.248101139869E-02,1.7000001+ ));+#7946 = SURFACE_CURVE('',#7947,(#7951,#7958),.PCURVE_S1.);+#7947 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7948,#7949,#7950),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7948 = CARTESIAN_POINT('',(0.438667686378,-0.151264719441,1.7000001));+#7949 = CARTESIAN_POINT('',(0.467187388689,-0.12353285421,1.7000001));+#7950 = CARTESIAN_POINT('',(0.467187388689,-7.248101139869E-02,1.7000001+ ));+#7951 = PCURVE('',#7538,#7952);+#7952 = DEFINITIONAL_REPRESENTATION('',(#7953),#7957);+#7953 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7954,#7955,#7956),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7954 = CARTESIAN_POINT('',(0.244387062346,7.216587656652E-02));+#7955 = CARTESIAN_POINT('',(0.272906764658,9.989774179732E-02));+#7956 = CARTESIAN_POINT('',(0.272906764658,0.150949584609));+#7957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7958 = PCURVE('',#3642,#7959);+#7959 = DEFINITIONAL_REPRESENTATION('',(#7960),#7964);+#7960 = LINE('',#7961,#7962);+#7961 = CARTESIAN_POINT('',(0.,-0.1));+#7962 = VECTOR('',#7963,1.);+#7963 = DIRECTION('',(1.,0.));+#7964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7965 = ORIENTED_EDGE('',*,*,#7966,.T.);+#7966 = EDGE_CURVE('',#7944,#7967,#7969,.T.);+#7967 = VERTEX_POINT('',#7968);+#7968 = CARTESIAN_POINT('',(0.437722281882,5.987561811196E-03,1.7000001)+ );+#7969 = SURFACE_CURVE('',#7970,(#7974,#7981),.PCURVE_S1.);+#7970 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7971,#7972,#7973),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7971 = CARTESIAN_POINT('',(0.467187388689,-7.248101139869E-02,1.7000001+ ));+#7972 = CARTESIAN_POINT('',(0.467187388689,-2.205943825177E-02,1.7000001+ ));+#7973 = CARTESIAN_POINT('',(0.437722281882,5.987561811196E-03,1.7000001)+ );+#7974 = PCURVE('',#7538,#7975);+#7975 = DEFINITIONAL_REPRESENTATION('',(#7976),#7980);+#7976 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7977,#7978,#7979),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7977 = CARTESIAN_POINT('',(0.272906764658,0.150949584609));+#7978 = CARTESIAN_POINT('',(0.272906764658,0.201371157755));+#7979 = CARTESIAN_POINT('',(0.24344165785,0.229418157818));+#7980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7981 = PCURVE('',#3603,#7982);+#7982 = DEFINITIONAL_REPRESENTATION('',(#7983),#7987);+#7983 = LINE('',#7984,#7985);+#7984 = CARTESIAN_POINT('',(0.,-0.1));+#7985 = VECTOR('',#7986,1.);+#7986 = DIRECTION('',(1.,0.));+#7987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7988 = ORIENTED_EDGE('',*,*,#7989,.T.);+#7989 = EDGE_CURVE('',#7967,#7990,#7992,.T.);+#7990 = VERTEX_POINT('',#7991);+#7991 = CARTESIAN_POINT('',(0.355629658102,3.403456187417E-02,1.7000001)+ );+#7992 = SURFACE_CURVE('',#7993,(#7997,#8004),.PCURVE_S1.);+#7993 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7994,#7995,#7996),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7994 = CARTESIAN_POINT('',(0.437722281882,5.987561811196E-03,1.7000001)+ );+#7995 = CARTESIAN_POINT('',(0.408257175074,3.403456187417E-02,1.7000001)+ );+#7996 = CARTESIAN_POINT('',(0.355629658102,3.403456187417E-02,1.7000001)+ );+#7997 = PCURVE('',#7538,#7998);+#7998 = DEFINITIONAL_REPRESENTATION('',(#7999),#8003);+#7999 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8000,#8001,#8002),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8000 = CARTESIAN_POINT('',(0.24344165785,0.229418157818));+#8001 = CARTESIAN_POINT('',(0.213976551042,0.257465157881));+#8002 = CARTESIAN_POINT('',(0.16134903407,0.257465157881));+#8003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8004 = PCURVE('',#3561,#8005);+#8005 = DEFINITIONAL_REPRESENTATION('',(#8006),#8010);+#8006 = LINE('',#8007,#8008);+#8007 = CARTESIAN_POINT('',(0.,-0.1));+#8008 = VECTOR('',#8009,1.);+#8009 = DIRECTION('',(1.,0.));+#8010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8011 = ORIENTED_EDGE('',*,*,#8012,.T.);+#8012 = EDGE_CURVE('',#7990,#8013,#8015,.T.);+#8013 = VERTEX_POINT('',#8014);+#8014 = CARTESIAN_POINT('',(0.305838354619,2.820456747906E-02,1.7000001)+ );+#8015 = SURFACE_CURVE('',#8016,(#8020,#8027),.PCURVE_S1.);+#8016 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8017,#8018,#8019),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8017 = CARTESIAN_POINT('',(0.355629658102,3.403456187417E-02,1.7000001)+ );+#8018 = CARTESIAN_POINT('',(0.330103736696,3.403456187417E-02,1.7000001)+ );+#8019 = CARTESIAN_POINT('',(0.305838354619,2.820456747906E-02,1.7000001)+ );+#8020 = PCURVE('',#7538,#8021);+#8021 = DEFINITIONAL_REPRESENTATION('',(#8022),#8026);+#8022 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8023,#8024,#8025),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8023 = CARTESIAN_POINT('',(0.16134903407,0.257465157881));+#8024 = CARTESIAN_POINT('',(0.135823112664,0.257465157881));+#8025 = CARTESIAN_POINT('',(0.111557730588,0.251635163486));+#8026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8027 = PCURVE('',#3525,#8028);+#8028 = DEFINITIONAL_REPRESENTATION('',(#8029),#8033);+#8029 = LINE('',#8030,#8031);+#8030 = CARTESIAN_POINT('',(0.,-0.1));+#8031 = VECTOR('',#8032,1.);+#8032 = DIRECTION('',(1.,0.));+#8033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8034 = ORIENTED_EDGE('',*,*,#8035,.T.);+#8035 = EDGE_CURVE('',#8013,#7575,#8036,.T.);+#8036 = SURFACE_CURVE('',#8037,(#8041,#8048),.PCURVE_S1.);+#8037 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8038,#8039,#8040),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8038 = CARTESIAN_POINT('',(0.305838354619,2.820456747906E-02,1.7000001)+ );+#8039 = CARTESIAN_POINT('',(0.281572972542,2.237457308394E-02,1.7000001)+ );+#8040 = CARTESIAN_POINT('',(0.259513534291,1.071458429372E-02,1.7000001)+ );+#8041 = PCURVE('',#7538,#8042);+#8042 = DEFINITIONAL_REPRESENTATION('',(#8043),#8047);+#8043 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8044,#8045,#8046),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8044 = CARTESIAN_POINT('',(0.111557730588,0.251635163486));+#8045 = CARTESIAN_POINT('',(8.729234851059E-02,0.245805169091));+#8046 = CARTESIAN_POINT('',(6.523291025882E-02,0.234145180301));+#8047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8048 = PCURVE('',#3489,#8049);+#8049 = DEFINITIONAL_REPRESENTATION('',(#8050),#8054);+#8050 = LINE('',#8051,#8052);+#8051 = CARTESIAN_POINT('',(0.,-0.1));+#8052 = VECTOR('',#8053,1.);+#8053 = DIRECTION('',(1.,0.));+#8054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8055 = ADVANCED_FACE('',(#8056),#4160,.T.);+#8056 = FACE_BOUND('',#8057,.T.);+#8057 = EDGE_LOOP('',(#8058,#8059,#8060,#8061));+#8058 = ORIENTED_EDGE('',*,*,#4144,.T.);+#8059 = ORIENTED_EDGE('',*,*,#7550,.T.);+#8060 = ORIENTED_EDGE('',*,*,#7621,.T.);+#8061 = ORIENTED_EDGE('',*,*,#8062,.F.);+#8062 = EDGE_CURVE('',#4118,#7622,#8063,.T.);+#8063 = SURFACE_CURVE('',#8064,(#8068,#8075),.PCURVE_S1.);+#8064 = LINE('',#8065,#8066);+#8065 = CARTESIAN_POINT('',(0.317498343409,0.193492786951,1.8000001));+#8066 = VECTOR('',#8067,1.);+#8067 = DIRECTION('',(-0.,-0.,-1.));+#8068 = PCURVE('',#4160,#8069);+#8069 = DEFINITIONAL_REPRESENTATION('',(#8070),#8074);+#8070 = LINE('',#8071,#8072);+#8071 = CARTESIAN_POINT('',(0.180257124,0.));+#8072 = VECTOR('',#8073,1.);+#8073 = DIRECTION('',(0.,-1.));+#8074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8075 = PCURVE('',#4133,#8076);+#8076 = DEFINITIONAL_REPRESENTATION('',(#8077),#8081);+#8077 = LINE('',#8078,#8079);+#8078 = CARTESIAN_POINT('',(0.,0.));+#8079 = VECTOR('',#8080,1.);+#8080 = DIRECTION('',(0.,-1.));+#8081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8082 = ADVANCED_FACE('',(#8083),#4133,.T.);+#8083 = FACE_BOUND('',#8084,.T.);+#8084 = EDGE_LOOP('',(#8085,#8086,#8087,#8088));+#8085 = ORIENTED_EDGE('',*,*,#4117,.T.);+#8086 = ORIENTED_EDGE('',*,*,#8062,.T.);+#8087 = ORIENTED_EDGE('',*,*,#7644,.T.);+#8088 = ORIENTED_EDGE('',*,*,#8089,.F.);+#8089 = EDGE_CURVE('',#4082,#7645,#8090,.T.);+#8090 = SURFACE_CURVE('',#8091,(#8095,#8102),.PCURVE_S1.);+#8091 = LINE('',#8092,#8093);+#8092 = CARTESIAN_POINT('',(0.317498343409,7.783830354555E-02,1.8000001)+ );+#8093 = VECTOR('',#8094,1.);+#8094 = DIRECTION('',(-0.,-0.,-1.));+#8095 = PCURVE('',#4133,#8096);+#8096 = DEFINITIONAL_REPRESENTATION('',(#8097),#8101);+#8097 = LINE('',#8098,#8099);+#8098 = CARTESIAN_POINT('',(0.115654483406,0.));+#8099 = VECTOR('',#8100,1.);+#8100 = DIRECTION('',(0.,-1.));+#8101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8102 = PCURVE('',#4101,#8103);+#8103 = DEFINITIONAL_REPRESENTATION('',(#8104),#8108);+#8104 = LINE('',#8105,#8106);+#8105 = CARTESIAN_POINT('',(0.,0.));+#8106 = VECTOR('',#8107,1.);+#8107 = DIRECTION('',(0.,-1.));+#8108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8109 = ADVANCED_FACE('',(#8110),#4101,.T.);+#8110 = FACE_BOUND('',#8111,.T.);+#8111 = EDGE_LOOP('',(#8112,#8113,#8114,#8115));+#8112 = ORIENTED_EDGE('',*,*,#4081,.T.);+#8113 = ORIENTED_EDGE('',*,*,#8089,.T.);+#8114 = ORIENTED_EDGE('',*,*,#7667,.T.);+#8115 = ORIENTED_EDGE('',*,*,#8116,.F.);+#8116 = EDGE_CURVE('',#4046,#7668,#8117,.T.);+#8117 = SURFACE_CURVE('',#8118,(#8122,#8129),.PCURVE_S1.);+#8118 = LINE('',#8119,#8120);+#8119 = CARTESIAN_POINT('',(0.344757506392,8.52439721015E-02,1.8000001)+ );+#8120 = VECTOR('',#8121,1.);+#8121 = DIRECTION('',(-0.,-0.,-1.));+#8122 = PCURVE('',#4101,#8123);+#8123 = DEFINITIONAL_REPRESENTATION('',(#8124),#8128);+#8124 = LINE('',#8125,#8126);+#8125 = CARTESIAN_POINT('',(1.,0.));+#8126 = VECTOR('',#8127,1.);+#8127 = DIRECTION('',(0.,-1.));+#8128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8129 = PCURVE('',#4065,#8130);+#8130 = DEFINITIONAL_REPRESENTATION('',(#8131),#8135);+#8131 = LINE('',#8132,#8133);+#8132 = CARTESIAN_POINT('',(0.,0.));+#8133 = VECTOR('',#8134,1.);+#8134 = DIRECTION('',(0.,-1.));+#8135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8136 = ADVANCED_FACE('',(#8137),#4065,.T.);+#8137 = FACE_BOUND('',#8138,.T.);+#8138 = EDGE_LOOP('',(#8139,#8140,#8141,#8142));+#8139 = ORIENTED_EDGE('',*,*,#4045,.T.);+#8140 = ORIENTED_EDGE('',*,*,#8116,.T.);+#8141 = ORIENTED_EDGE('',*,*,#7690,.T.);+#8142 = ORIENTED_EDGE('',*,*,#8143,.F.);+#8143 = EDGE_CURVE('',#4001,#7691,#8144,.T.);+#8144 = SURFACE_CURVE('',#8145,(#8149,#8156),.PCURVE_S1.);+#8145 = LINE('',#8146,#8147);+#8146 = CARTESIAN_POINT('',(0.372331804207,8.760748334276E-02,1.8000001)+ );+#8147 = VECTOR('',#8148,1.);+#8148 = DIRECTION('',(-0.,-0.,-1.));+#8149 = PCURVE('',#4065,#8150);+#8150 = DEFINITIONAL_REPRESENTATION('',(#8151),#8155);+#8151 = LINE('',#8152,#8153);+#8152 = CARTESIAN_POINT('',(1.,0.));+#8153 = VECTOR('',#8154,1.);+#8154 = DIRECTION('',(0.,-1.));+#8155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8156 = PCURVE('',#4026,#8157);+#8157 = DEFINITIONAL_REPRESENTATION('',(#8158),#8162);+#8158 = LINE('',#8159,#8160);+#8159 = CARTESIAN_POINT('',(0.,0.));+#8160 = VECTOR('',#8161,1.);+#8161 = DIRECTION('',(0.,-1.));+#8162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8163 = ADVANCED_FACE('',(#8164),#4026,.T.);+#8164 = FACE_BOUND('',#8165,.T.);+#8165 = EDGE_LOOP('',(#8166,#8167,#8168,#8169));+#8166 = ORIENTED_EDGE('',*,*,#4000,.T.);+#8167 = ORIENTED_EDGE('',*,*,#8143,.T.);+#8168 = ORIENTED_EDGE('',*,*,#7713,.T.);+#8169 = ORIENTED_EDGE('',*,*,#8170,.F.);+#8170 = EDGE_CURVE('',#3956,#7714,#8171,.T.);+#8171 = SURFACE_CURVE('',#8172,(#8176,#8183),.PCURVE_S1.);+#8172 = LINE('',#8173,#8174);+#8173 = CARTESIAN_POINT('',(0.488301422445,4.443401133572E-02,1.8000001)+ );+#8174 = VECTOR('',#8175,1.);+#8175 = DIRECTION('',(-0.,-0.,-1.));+#8176 = PCURVE('',#4026,#8177);+#8177 = DEFINITIONAL_REPRESENTATION('',(#8178),#8182);+#8178 = LINE('',#8179,#8180);+#8179 = CARTESIAN_POINT('',(1.,0.));+#8180 = VECTOR('',#8181,1.);+#8181 = DIRECTION('',(0.,-1.));+#8182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8183 = PCURVE('',#3981,#8184);+#8184 = DEFINITIONAL_REPRESENTATION('',(#8185),#8189);+#8185 = LINE('',#8186,#8187);+#8186 = CARTESIAN_POINT('',(0.,0.));+#8187 = VECTOR('',#8188,1.);+#8188 = DIRECTION('',(0.,-1.));+#8189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8190 = ADVANCED_FACE('',(#8191),#3981,.T.);+#8191 = FACE_BOUND('',#8192,.T.);+#8192 = EDGE_LOOP('',(#8193,#8194,#8195,#8196));+#8193 = ORIENTED_EDGE('',*,*,#3955,.T.);+#8194 = ORIENTED_EDGE('',*,*,#8170,.T.);+#8195 = ORIENTED_EDGE('',*,*,#7736,.T.);+#8196 = ORIENTED_EDGE('',*,*,#8197,.F.);+#8197 = EDGE_CURVE('',#3911,#7737,#8198,.T.);+#8198 = SURFACE_CURVE('',#8199,(#8203,#8210),.PCURVE_S1.);+#8199 = LINE('',#8200,#8201);+#8200 = CARTESIAN_POINT('',(0.53115975962,-7.248101139869E-02,1.8000001)+ );+#8201 = VECTOR('',#8202,1.);+#8202 = DIRECTION('',(-0.,-0.,-1.));+#8203 = PCURVE('',#3981,#8204);+#8204 = DEFINITIONAL_REPRESENTATION('',(#8205),#8209);+#8205 = LINE('',#8206,#8207);+#8206 = CARTESIAN_POINT('',(1.,0.));+#8207 = VECTOR('',#8208,1.);+#8208 = DIRECTION('',(0.,-1.));+#8209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8210 = PCURVE('',#3936,#8211);+#8211 = DEFINITIONAL_REPRESENTATION('',(#8212),#8216);+#8212 = LINE('',#8213,#8214);+#8213 = CARTESIAN_POINT('',(0.,0.));+#8214 = VECTOR('',#8215,1.);+#8215 = DIRECTION('',(0.,-1.));+#8216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8217 = ADVANCED_FACE('',(#8218),#3936,.T.);+#8218 = FACE_BOUND('',#8219,.T.);+#8219 = EDGE_LOOP('',(#8220,#8221,#8222,#8223));+#8220 = ORIENTED_EDGE('',*,*,#3910,.T.);+#8221 = ORIENTED_EDGE('',*,*,#8197,.T.);+#8222 = ORIENTED_EDGE('',*,*,#7759,.T.);+#8223 = ORIENTED_EDGE('',*,*,#8224,.F.);+#8224 = EDGE_CURVE('',#3866,#7760,#8225,.T.);+#8225 = SURFACE_CURVE('',#8226,(#8230,#8237),.PCURVE_S1.);+#8226 = LINE('',#8227,#8228);+#8227 = CARTESIAN_POINT('',(0.486253046036,-0.189711168965,1.8000001));+#8228 = VECTOR('',#8229,1.);+#8229 = DIRECTION('',(-0.,-0.,-1.));+#8230 = PCURVE('',#3936,#8231);+#8231 = DEFINITIONAL_REPRESENTATION('',(#8232),#8236);+#8232 = LINE('',#8233,#8234);+#8233 = CARTESIAN_POINT('',(1.,0.));+#8234 = VECTOR('',#8235,1.);+#8235 = DIRECTION('',(0.,-1.));+#8236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8237 = PCURVE('',#3891,#8238);+#8238 = DEFINITIONAL_REPRESENTATION('',(#8239),#8243);+#8239 = LINE('',#8240,#8241);+#8240 = CARTESIAN_POINT('',(0.,0.));+#8241 = VECTOR('',#8242,1.);+#8242 = DIRECTION('',(0.,-1.));+#8243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8244 = ADVANCED_FACE('',(#8245),#3891,.T.);+#8245 = FACE_BOUND('',#8246,.T.);+#8246 = EDGE_LOOP('',(#8247,#8248,#8249,#8250));+#8247 = ORIENTED_EDGE('',*,*,#3865,.T.);+#8248 = ORIENTED_EDGE('',*,*,#8224,.T.);+#8249 = ORIENTED_EDGE('',*,*,#7782,.T.);+#8250 = ORIENTED_EDGE('',*,*,#8251,.F.);+#8251 = EDGE_CURVE('',#3830,#7783,#8252,.T.);+#8252 = SURFACE_CURVE('',#8253,(#8257,#8264),.PCURVE_S1.);+#8253 = LINE('',#8254,#8255);+#8254 = CARTESIAN_POINT('',(0.363508028906,-0.23256950614,1.8000001));+#8255 = VECTOR('',#8256,1.);+#8256 = DIRECTION('',(-0.,-0.,-1.));+#8257 = PCURVE('',#3891,#8258);+#8258 = DEFINITIONAL_REPRESENTATION('',(#8259),#8263);+#8259 = LINE('',#8260,#8261);+#8260 = CARTESIAN_POINT('',(1.,0.));+#8261 = VECTOR('',#8262,1.);+#8262 = DIRECTION('',(0.,-1.));+#8263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8264 = PCURVE('',#3849,#8265);+#8265 = DEFINITIONAL_REPRESENTATION('',(#8266),#8270);+#8266 = LINE('',#8267,#8268);+#8267 = CARTESIAN_POINT('',(0.,0.));+#8268 = VECTOR('',#8269,1.);+#8269 = DIRECTION('',(0.,-1.));+#8270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8271 = ADVANCED_FACE('',(#8272),#3849,.T.);+#8272 = FACE_BOUND('',#8273,.T.);+#8273 = EDGE_LOOP('',(#8274,#8275,#8276,#8277));+#8274 = ORIENTED_EDGE('',*,*,#3829,.T.);+#8275 = ORIENTED_EDGE('',*,*,#8251,.T.);+#8276 = ORIENTED_EDGE('',*,*,#7805,.T.);+#8277 = ORIENTED_EDGE('',*,*,#8278,.F.);+#8278 = EDGE_CURVE('',#3794,#7806,#8279,.T.);+#8279 = SURFACE_CURVE('',#8280,(#8284,#8291),.PCURVE_S1.);+#8280 = LINE('',#8281,#8282);+#8281 = CARTESIAN_POINT('',(0.294966202909,-0.227527348825,1.8000001));+#8282 = VECTOR('',#8283,1.);+#8283 = DIRECTION('',(-0.,-0.,-1.));+#8284 = PCURVE('',#3849,#8285);+#8285 = DEFINITIONAL_REPRESENTATION('',(#8286),#8290);+#8286 = LINE('',#8287,#8288);+#8287 = CARTESIAN_POINT('',(1.,0.));+#8288 = VECTOR('',#8289,1.);+#8289 = DIRECTION('',(0.,-1.));+#8290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8291 = PCURVE('',#3813,#8292);+#8292 = DEFINITIONAL_REPRESENTATION('',(#8293),#8297);+#8293 = LINE('',#8294,#8295);+#8294 = CARTESIAN_POINT('',(0.,0.));+#8295 = VECTOR('',#8296,1.);+#8296 = DIRECTION('',(0.,-1.));+#8297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8298 = ADVANCED_FACE('',(#8299),#3813,.T.);+#8299 = FACE_BOUND('',#8300,.T.);+#8300 = EDGE_LOOP('',(#8301,#8302,#8303,#8304));+#8301 = ORIENTED_EDGE('',*,*,#3793,.T.);+#8302 = ORIENTED_EDGE('',*,*,#8278,.T.);+#8303 = ORIENTED_EDGE('',*,*,#7828,.T.);+#8304 = ORIENTED_EDGE('',*,*,#8305,.F.);+#8305 = EDGE_CURVE('',#3767,#7829,#8306,.T.);+#8306 = SURFACE_CURVE('',#8307,(#8311,#8318),.PCURVE_S1.);+#8307 = LINE('',#8308,#8309);+#8308 = CARTESIAN_POINT('',(0.239344905032,-0.212400876881,1.8000001));+#8309 = VECTOR('',#8310,1.);+#8310 = DIRECTION('',(-0.,-0.,-1.));+#8311 = PCURVE('',#3813,#8312);+#8312 = DEFINITIONAL_REPRESENTATION('',(#8313),#8317);+#8313 = LINE('',#8314,#8315);+#8314 = CARTESIAN_POINT('',(1.,0.));+#8315 = VECTOR('',#8316,1.);+#8316 = DIRECTION('',(0.,-1.));+#8317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8318 = PCURVE('',#3782,#8319);+#8319 = DEFINITIONAL_REPRESENTATION('',(#8320),#8324);+#8320 = LINE('',#8321,#8322);+#8321 = CARTESIAN_POINT('',(0.,0.));+#8322 = VECTOR('',#8323,1.);+#8323 = DIRECTION('',(0.,-1.));+#8324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8325 = ADVANCED_FACE('',(#8326),#3782,.T.);+#8326 = FACE_BOUND('',#8327,.T.);+#8327 = EDGE_LOOP('',(#8328,#8329,#8330,#8331));+#8328 = ORIENTED_EDGE('',*,*,#3766,.T.);+#8329 = ORIENTED_EDGE('',*,*,#8305,.T.);+#8330 = ORIENTED_EDGE('',*,*,#7851,.T.);+#8331 = ORIENTED_EDGE('',*,*,#8332,.F.);+#8332 = EDGE_CURVE('',#3731,#7852,#8333,.T.);+#8333 = SURFACE_CURVE('',#8334,(#8338,#8345),.PCURVE_S1.);+#8334 = LINE('',#8335,#8336);+#8335 = CARTESIAN_POINT('',(0.239344905032,-0.147798236287,1.8000001));+#8336 = VECTOR('',#8337,1.);+#8337 = DIRECTION('',(-0.,-0.,-1.));+#8338 = PCURVE('',#3782,#8339);+#8339 = DEFINITIONAL_REPRESENTATION('',(#8340),#8344);+#8340 = LINE('',#8341,#8342);+#8341 = CARTESIAN_POINT('',(6.460264059448E-02,0.));+#8342 = VECTOR('',#8343,1.);+#8343 = DIRECTION('',(0.,-1.));+#8344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8345 = PCURVE('',#3750,#8346);+#8346 = DEFINITIONAL_REPRESENTATION('',(#8347),#8351);+#8347 = LINE('',#8348,#8349);+#8348 = CARTESIAN_POINT('',(0.,0.));+#8349 = VECTOR('',#8350,1.);+#8350 = DIRECTION('',(0.,-1.));+#8351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8352 = ADVANCED_FACE('',(#8353),#3750,.T.);+#8353 = FACE_BOUND('',#8354,.T.);+#8354 = EDGE_LOOP('',(#8355,#8356,#8357,#8358));+#8355 = ORIENTED_EDGE('',*,*,#3730,.T.);+#8356 = ORIENTED_EDGE('',*,*,#8332,.T.);+#8357 = ORIENTED_EDGE('',*,*,#7874,.T.);+#8358 = ORIENTED_EDGE('',*,*,#8359,.F.);+#8359 = EDGE_CURVE('',#3695,#7875,#8360,.T.);+#8360 = SURFACE_CURVE('',#8361,(#8365,#8372),.PCURVE_S1.);+#8361 = LINE('',#8362,#8363);+#8362 = CARTESIAN_POINT('',(0.297644848983,-0.171275781283,1.8000001));+#8363 = VECTOR('',#8364,1.);+#8364 = DIRECTION('',(-0.,-0.,-1.));+#8365 = PCURVE('',#3750,#8366);+#8366 = DEFINITIONAL_REPRESENTATION('',(#8367),#8371);+#8367 = LINE('',#8368,#8369);+#8368 = CARTESIAN_POINT('',(1.,0.));+#8369 = VECTOR('',#8370,1.);+#8370 = DIRECTION('',(0.,-1.));+#8371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8372 = PCURVE('',#3714,#8373);+#8373 = DEFINITIONAL_REPRESENTATION('',(#8374),#8378);+#8374 = LINE('',#8375,#8376);+#8375 = CARTESIAN_POINT('',(0.,0.));+#8376 = VECTOR('',#8377,1.);+#8377 = DIRECTION('',(0.,-1.));+#8378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8379 = ADVANCED_FACE('',(#8380),#3714,.T.);+#8380 = FACE_BOUND('',#8381,.T.);+#8381 = EDGE_LOOP('',(#8382,#8383,#8384,#8385));+#8382 = ORIENTED_EDGE('',*,*,#3694,.T.);+#8383 = ORIENTED_EDGE('',*,*,#8359,.T.);+#8384 = ORIENTED_EDGE('',*,*,#7897,.T.);+#8385 = ORIENTED_EDGE('',*,*,#8386,.F.);+#8386 = EDGE_CURVE('',#3659,#7898,#8387,.T.);+#8387 = SURFACE_CURVE('',#8388,(#8392,#8399),.PCURVE_S1.);+#8388 = LINE('',#8389,#8390);+#8389 = CARTESIAN_POINT('',(0.357520467095,-0.178996584672,1.8000001));+#8390 = VECTOR('',#8391,1.);+#8391 = DIRECTION('',(-0.,-0.,-1.));+#8392 = PCURVE('',#3714,#8393);+#8393 = DEFINITIONAL_REPRESENTATION('',(#8394),#8398);+#8394 = LINE('',#8395,#8396);+#8395 = CARTESIAN_POINT('',(1.,0.));+#8396 = VECTOR('',#8397,1.);+#8397 = DIRECTION('',(0.,-1.));+#8398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8399 = PCURVE('',#3678,#8400);+#8400 = DEFINITIONAL_REPRESENTATION('',(#8401),#8405);+#8401 = LINE('',#8402,#8403);+#8402 = CARTESIAN_POINT('',(0.,0.));+#8403 = VECTOR('',#8404,1.);+#8404 = DIRECTION('',(0.,-1.));+#8405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8406 = ADVANCED_FACE('',(#8407),#3678,.T.);+#8407 = FACE_BOUND('',#8408,.T.);+#8408 = EDGE_LOOP('',(#8409,#8410,#8411,#8412));+#8409 = ORIENTED_EDGE('',*,*,#3658,.T.);+#8410 = ORIENTED_EDGE('',*,*,#8386,.T.);+#8411 = ORIENTED_EDGE('',*,*,#7920,.T.);+#8412 = ORIENTED_EDGE('',*,*,#8413,.F.);+#8413 = EDGE_CURVE('',#3623,#7921,#8414,.T.);+#8414 = SURFACE_CURVE('',#8415,(#8419,#8426),.PCURVE_S1.);+#8415 = LINE('',#8416,#8417);+#8416 = CARTESIAN_POINT('',(0.438667686378,-0.151264719441,1.8000001));+#8417 = VECTOR('',#8418,1.);+#8418 = DIRECTION('',(-0.,-0.,-1.));+#8419 = PCURVE('',#3678,#8420);+#8420 = DEFINITIONAL_REPRESENTATION('',(#8421),#8425);+#8421 = LINE('',#8422,#8423);+#8422 = CARTESIAN_POINT('',(1.,0.));+#8423 = VECTOR('',#8424,1.);+#8424 = DIRECTION('',(0.,-1.));+#8425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8426 = PCURVE('',#3642,#8427);+#8427 = DEFINITIONAL_REPRESENTATION('',(#8428),#8432);+#8428 = LINE('',#8429,#8430);+#8429 = CARTESIAN_POINT('',(0.,0.));+#8430 = VECTOR('',#8431,1.);+#8431 = DIRECTION('',(0.,-1.));+#8432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8433 = ADVANCED_FACE('',(#8434),#3642,.T.);+#8434 = FACE_BOUND('',#8435,.T.);+#8435 = EDGE_LOOP('',(#8436,#8437,#8438,#8439));+#8436 = ORIENTED_EDGE('',*,*,#3622,.T.);+#8437 = ORIENTED_EDGE('',*,*,#8413,.T.);+#8438 = ORIENTED_EDGE('',*,*,#7943,.T.);+#8439 = ORIENTED_EDGE('',*,*,#8440,.F.);+#8440 = EDGE_CURVE('',#3578,#7944,#8441,.T.);+#8441 = SURFACE_CURVE('',#8442,(#8446,#8453),.PCURVE_S1.);+#8442 = LINE('',#8443,#8444);+#8443 = CARTESIAN_POINT('',(0.467187388689,-7.248101139869E-02,1.8000001+ ));+#8444 = VECTOR('',#8445,1.);+#8445 = DIRECTION('',(-0.,-0.,-1.));+#8446 = PCURVE('',#3642,#8447);+#8447 = DEFINITIONAL_REPRESENTATION('',(#8448),#8452);+#8448 = LINE('',#8449,#8450);+#8449 = CARTESIAN_POINT('',(1.,0.));+#8450 = VECTOR('',#8451,1.);+#8451 = DIRECTION('',(0.,-1.));+#8452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8453 = PCURVE('',#3603,#8454);+#8454 = DEFINITIONAL_REPRESENTATION('',(#8455),#8459);+#8455 = LINE('',#8456,#8457);+#8456 = CARTESIAN_POINT('',(0.,0.));+#8457 = VECTOR('',#8458,1.);+#8458 = DIRECTION('',(0.,-1.));+#8459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8460 = ADVANCED_FACE('',(#8461),#3603,.T.);+#8461 = FACE_BOUND('',#8462,.T.);+#8462 = EDGE_LOOP('',(#8463,#8464,#8465,#8466));+#8463 = ORIENTED_EDGE('',*,*,#3577,.T.);+#8464 = ORIENTED_EDGE('',*,*,#8440,.T.);+#8465 = ORIENTED_EDGE('',*,*,#7966,.T.);+#8466 = ORIENTED_EDGE('',*,*,#8467,.F.);+#8467 = EDGE_CURVE('',#3542,#7967,#8468,.T.);+#8468 = SURFACE_CURVE('',#8469,(#8473,#8480),.PCURVE_S1.);+#8469 = LINE('',#8470,#8471);+#8470 = CARTESIAN_POINT('',(0.437722281882,5.987561811196E-03,1.8000001)+ );+#8471 = VECTOR('',#8472,1.);+#8472 = DIRECTION('',(-0.,-0.,-1.));+#8473 = PCURVE('',#3603,#8474);+#8474 = DEFINITIONAL_REPRESENTATION('',(#8475),#8479);+#8475 = LINE('',#8476,#8477);+#8476 = CARTESIAN_POINT('',(1.,0.));+#8477 = VECTOR('',#8478,1.);+#8478 = DIRECTION('',(0.,-1.));+#8479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8480 = PCURVE('',#3561,#8481);+#8481 = DEFINITIONAL_REPRESENTATION('',(#8482),#8486);+#8482 = LINE('',#8483,#8484);+#8483 = CARTESIAN_POINT('',(0.,0.));+#8484 = VECTOR('',#8485,1.);+#8485 = DIRECTION('',(0.,-1.));+#8486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8487 = ADVANCED_FACE('',(#8488),#3561,.T.);+#8488 = FACE_BOUND('',#8489,.T.);+#8489 = EDGE_LOOP('',(#8490,#8491,#8492,#8493));+#8490 = ORIENTED_EDGE('',*,*,#3541,.T.);+#8491 = ORIENTED_EDGE('',*,*,#8467,.T.);+#8492 = ORIENTED_EDGE('',*,*,#7989,.T.);+#8493 = ORIENTED_EDGE('',*,*,#8494,.F.);+#8494 = EDGE_CURVE('',#3506,#7990,#8495,.T.);+#8495 = SURFACE_CURVE('',#8496,(#8500,#8507),.PCURVE_S1.);+#8496 = LINE('',#8497,#8498);+#8497 = CARTESIAN_POINT('',(0.355629658102,3.403456187417E-02,1.8000001)+ );+#8498 = VECTOR('',#8499,1.);+#8499 = DIRECTION('',(-0.,-0.,-1.));+#8500 = PCURVE('',#3561,#8501);+#8501 = DEFINITIONAL_REPRESENTATION('',(#8502),#8506);+#8502 = LINE('',#8503,#8504);+#8503 = CARTESIAN_POINT('',(1.,0.));+#8504 = VECTOR('',#8505,1.);+#8505 = DIRECTION('',(0.,-1.));+#8506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8507 = PCURVE('',#3525,#8508);+#8508 = DEFINITIONAL_REPRESENTATION('',(#8509),#8513);+#8509 = LINE('',#8510,#8511);+#8510 = CARTESIAN_POINT('',(0.,0.));+#8511 = VECTOR('',#8512,1.);+#8512 = DIRECTION('',(0.,-1.));+#8513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8514 = ADVANCED_FACE('',(#8515),#3525,.T.);+#8515 = FACE_BOUND('',#8516,.T.);+#8516 = EDGE_LOOP('',(#8517,#8518,#8519,#8520));+#8517 = ORIENTED_EDGE('',*,*,#3505,.T.);+#8518 = ORIENTED_EDGE('',*,*,#8494,.T.);+#8519 = ORIENTED_EDGE('',*,*,#8012,.T.);+#8520 = ORIENTED_EDGE('',*,*,#8521,.F.);+#8521 = EDGE_CURVE('',#3470,#8013,#8522,.T.);+#8522 = SURFACE_CURVE('',#8523,(#8527,#8534),.PCURVE_S1.);+#8523 = LINE('',#8524,#8525);+#8524 = CARTESIAN_POINT('',(0.305838354619,2.820456747906E-02,1.8000001)+ );+#8525 = VECTOR('',#8526,1.);+#8526 = DIRECTION('',(-0.,-0.,-1.));+#8527 = PCURVE('',#3525,#8528);+#8528 = DEFINITIONAL_REPRESENTATION('',(#8529),#8533);+#8529 = LINE('',#8530,#8531);+#8530 = CARTESIAN_POINT('',(1.,0.));+#8531 = VECTOR('',#8532,1.);+#8532 = DIRECTION('',(0.,-1.));+#8533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8534 = PCURVE('',#3489,#8535);+#8535 = DEFINITIONAL_REPRESENTATION('',(#8536),#8540);+#8536 = LINE('',#8537,#8538);+#8537 = CARTESIAN_POINT('',(0.,0.));+#8538 = VECTOR('',#8539,1.);+#8539 = DIRECTION('',(0.,-1.));+#8540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8541 = ADVANCED_FACE('',(#8542),#3489,.T.);+#8542 = FACE_BOUND('',#8543,.T.);+#8543 = EDGE_LOOP('',(#8544,#8545,#8546,#8547));+#8544 = ORIENTED_EDGE('',*,*,#3469,.T.);+#8545 = ORIENTED_EDGE('',*,*,#8521,.T.);+#8546 = ORIENTED_EDGE('',*,*,#8035,.T.);+#8547 = ORIENTED_EDGE('',*,*,#8548,.F.);+#8548 = EDGE_CURVE('',#3443,#7575,#8549,.T.);+#8549 = SURFACE_CURVE('',#8550,(#8554,#8561),.PCURVE_S1.);+#8550 = LINE('',#8551,#8552);+#8551 = CARTESIAN_POINT('',(0.259513534291,1.071458429372E-02,1.8000001)+ );+#8552 = VECTOR('',#8553,1.);+#8553 = DIRECTION('',(-0.,-0.,-1.));+#8554 = PCURVE('',#3489,#8555);+#8555 = DEFINITIONAL_REPRESENTATION('',(#8556),#8560);+#8556 = LINE('',#8557,#8558);+#8557 = CARTESIAN_POINT('',(1.,0.));+#8558 = VECTOR('',#8559,1.);+#8559 = DIRECTION('',(0.,-1.));+#8560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8561 = PCURVE('',#3458,#8562);+#8562 = DEFINITIONAL_REPRESENTATION('',(#8563),#8567);+#8563 = LINE('',#8564,#8565);+#8564 = CARTESIAN_POINT('',(0.,0.));+#8565 = VECTOR('',#8566,1.);+#8566 = DIRECTION('',(0.,-1.));+#8567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8568 = ADVANCED_FACE('',(#8569),#3458,.T.);+#8569 = FACE_BOUND('',#8570,.T.);+#8570 = EDGE_LOOP('',(#8571,#8572,#8573,#8574));+#8571 = ORIENTED_EDGE('',*,*,#3442,.T.);+#8572 = ORIENTED_EDGE('',*,*,#8548,.T.);+#8573 = ORIENTED_EDGE('',*,*,#7574,.T.);+#8574 = ORIENTED_EDGE('',*,*,#8575,.F.);+#8575 = EDGE_CURVE('',#3416,#7577,#8576,.T.);+#8576 = SURFACE_CURVE('',#8577,(#8581,#8588),.PCURVE_S1.);+#8577 = LINE('',#8578,#8579);+#8578 = CARTESIAN_POINT('',(0.259513534291,0.24706570842,1.8000001));+#8579 = VECTOR('',#8580,1.);+#8580 = DIRECTION('',(-0.,-0.,-1.));+#8581 = PCURVE('',#3458,#8582);+#8582 = DEFINITIONAL_REPRESENTATION('',(#8583),#8587);+#8583 = LINE('',#8584,#8585);+#8584 = CARTESIAN_POINT('',(0.236351124126,0.));+#8585 = VECTOR('',#8586,1.);+#8586 = DIRECTION('',(0.,-1.));+#8587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8588 = PCURVE('',#3431,#8589);+#8589 = DEFINITIONAL_REPRESENTATION('',(#8590),#8594);+#8590 = LINE('',#8591,#8592);+#8591 = CARTESIAN_POINT('',(0.,0.));+#8592 = VECTOR('',#8593,1.);+#8593 = DIRECTION('',(0.,-1.));+#8594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8595 = ADVANCED_FACE('',(#8596),#3431,.T.);+#8596 = FACE_BOUND('',#8597,.T.);+#8597 = EDGE_LOOP('',(#8598,#8599,#8600,#8601));+#8598 = ORIENTED_EDGE('',*,*,#3413,.T.);+#8599 = ORIENTED_EDGE('',*,*,#8575,.T.);+#8600 = ORIENTED_EDGE('',*,*,#7599,.T.);+#8601 = ORIENTED_EDGE('',*,*,#7499,.F.);+#8602 = ADVANCED_FACE('',(#8603),#3400,.T.);+#8603 = FACE_BOUND('',#8604,.T.);+#8604 = EDGE_LOOP('',(#8605,#8606,#8629,#8657));+#8605 = ORIENTED_EDGE('',*,*,#3386,.T.);+#8606 = ORIENTED_EDGE('',*,*,#8607,.T.);+#8607 = EDGE_CURVE('',#2629,#8608,#8610,.T.);+#8608 = VERTEX_POINT('',#8609);+#8609 = CARTESIAN_POINT('',(0.886316715473,0.24706570842,1.7000001));+#8610 = SURFACE_CURVE('',#8611,(#8615,#8622),.PCURVE_S1.);+#8611 = LINE('',#8612,#8613);+#8612 = CARTESIAN_POINT('',(0.886316715473,0.24706570842,1.8000001));+#8613 = VECTOR('',#8614,1.);+#8614 = DIRECTION('',(-0.,-0.,-1.));+#8615 = PCURVE('',#3400,#8616);+#8616 = DEFINITIONAL_REPRESENTATION('',(#8617),#8621);+#8617 = LINE('',#8618,#8619);+#8618 = CARTESIAN_POINT('',(0.,0.));+#8619 = VECTOR('',#8620,1.);+#8620 = DIRECTION('',(0.,-1.));+#8621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8622 = PCURVE('',#2646,#8623);+#8623 = DEFINITIONAL_REPRESENTATION('',(#8624),#8628);+#8624 = LINE('',#8625,#8626);+#8625 = CARTESIAN_POINT('',(0.238241933119,0.));+#8626 = VECTOR('',#8627,1.);+#8627 = DIRECTION('',(0.,-1.));+#8628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8629 = ORIENTED_EDGE('',*,*,#8630,.T.);+#8630 = EDGE_CURVE('',#8608,#8631,#8633,.T.);+#8631 = VERTEX_POINT('',#8632);+#8632 = CARTESIAN_POINT('',(0.886316715473,0.193492786951,1.7000001));+#8633 = SURFACE_CURVE('',#8634,(#8638,#8645),.PCURVE_S1.);+#8634 = LINE('',#8635,#8636);+#8635 = CARTESIAN_POINT('',(0.886316715473,0.24706570842,1.7000001));+#8636 = VECTOR('',#8637,1.);+#8637 = DIRECTION('',(0.,-1.,0.));+#8638 = PCURVE('',#3400,#8639);+#8639 = DEFINITIONAL_REPRESENTATION('',(#8640),#8644);+#8640 = LINE('',#8641,#8642);+#8641 = CARTESIAN_POINT('',(0.,-0.1));+#8642 = VECTOR('',#8643,1.);+#8643 = DIRECTION('',(1.,0.));+#8644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8645 = PCURVE('',#8646,#8651);+#8646 = PLANE('',#8647);+#8647 = AXIS2_PLACEMENT_3D('',#8648,#8649,#8650);+#8648 = CARTESIAN_POINT('',(0.582841872095,-0.223430596007,1.7000001));+#8649 = DIRECTION('',(0.,0.,1.));+#8650 = DIRECTION('',(1.,0.,0.));+#8651 = DEFINITIONAL_REPRESENTATION('',(#8652),#8656);+#8652 = LINE('',#8653,#8654);+#8653 = CARTESIAN_POINT('',(0.303474843378,0.470496304427));+#8654 = VECTOR('',#8655,1.);+#8655 = DIRECTION('',(0.,-1.));+#8656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8657 = ORIENTED_EDGE('',*,*,#8658,.F.);+#8658 = EDGE_CURVE('',#3360,#8631,#8659,.T.);+#8659 = SURFACE_CURVE('',#8660,(#8664,#8671),.PCURVE_S1.);+#8660 = LINE('',#8661,#8662);+#8661 = CARTESIAN_POINT('',(0.886316715473,0.193492786951,1.8000001));+#8662 = VECTOR('',#8663,1.);+#8663 = DIRECTION('',(-0.,-0.,-1.));+#8664 = PCURVE('',#3400,#8665);+#8665 = DEFINITIONAL_REPRESENTATION('',(#8666),#8670);+#8666 = LINE('',#8667,#8668);+#8667 = CARTESIAN_POINT('',(5.35729214686E-02,0.));+#8668 = VECTOR('',#8669,1.);+#8669 = DIRECTION('',(0.,-1.));+#8670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8671 = PCURVE('',#3375,#8672);+#8672 = DEFINITIONAL_REPRESENTATION('',(#8673),#8677);+#8673 = LINE('',#8674,#8675);+#8674 = CARTESIAN_POINT('',(0.,0.));+#8675 = VECTOR('',#8676,1.);+#8676 = DIRECTION('',(0.,-1.));+#8677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8678 = ADVANCED_FACE('',(#8679),#8646,.T.);+#8679 = FACE_BOUND('',#8680,.F.);+#8680 = EDGE_LOOP('',(#8681,#8706,#8727,#8728,#8751,#8774,#8797,#8820,+ #8843,#8866,#8889,#8912,#8935,#8958,#8981,#9004,#9027,#9050,#9073,+ #9096,#9119,#9142));+#8681 = ORIENTED_EDGE('',*,*,#8682,.T.);+#8682 = EDGE_CURVE('',#8683,#8685,#8687,.T.);+#8683 = VERTEX_POINT('',#8684);+#8684 = CARTESIAN_POINT('',(0.648074782354,1.071458429372E-02,1.7000001)+ );+#8685 = VERTEX_POINT('',#8686);+#8686 = CARTESIAN_POINT('',(0.648074782354,0.24706570842,1.7000001));+#8687 = SURFACE_CURVE('',#8688,(#8692,#8699),.PCURVE_S1.);+#8688 = LINE('',#8689,#8690);+#8689 = CARTESIAN_POINT('',(0.648074782354,1.071458429372E-02,1.7000001)+ );+#8690 = VECTOR('',#8691,1.);+#8691 = DIRECTION('',(0.,1.,0.));+#8692 = PCURVE('',#8646,#8693);+#8693 = DEFINITIONAL_REPRESENTATION('',(#8694),#8698);+#8694 = LINE('',#8695,#8696);+#8695 = CARTESIAN_POINT('',(6.523291025882E-02,0.234145180301));+#8696 = VECTOR('',#8697,1.);+#8697 = DIRECTION('',(0.,1.));+#8698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8699 = PCURVE('',#2673,#8700);+#8700 = DEFINITIONAL_REPRESENTATION('',(#8701),#8705);+#8701 = LINE('',#8702,#8703);+#8702 = CARTESIAN_POINT('',(0.,-0.1));+#8703 = VECTOR('',#8704,1.);+#8704 = DIRECTION('',(1.,0.));+#8705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8706 = ORIENTED_EDGE('',*,*,#8707,.T.);+#8707 = EDGE_CURVE('',#8685,#8608,#8708,.T.);+#8708 = SURFACE_CURVE('',#8709,(#8713,#8720),.PCURVE_S1.);+#8709 = LINE('',#8710,#8711);+#8710 = CARTESIAN_POINT('',(0.648074782354,0.24706570842,1.7000001));+#8711 = VECTOR('',#8712,1.);+#8712 = DIRECTION('',(1.,0.,0.));+#8713 = PCURVE('',#8646,#8714);+#8714 = DEFINITIONAL_REPRESENTATION('',(#8715),#8719);+#8715 = LINE('',#8716,#8717);+#8716 = CARTESIAN_POINT('',(6.523291025882E-02,0.470496304427));+#8717 = VECTOR('',#8718,1.);+#8718 = DIRECTION('',(1.,0.));+#8719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8720 = PCURVE('',#2646,#8721);+#8721 = DEFINITIONAL_REPRESENTATION('',(#8722),#8726);+#8722 = LINE('',#8723,#8724);+#8723 = CARTESIAN_POINT('',(0.,-0.1));+#8724 = VECTOR('',#8725,1.);+#8725 = DIRECTION('',(1.,0.));+#8726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8727 = ORIENTED_EDGE('',*,*,#8630,.T.);+#8728 = ORIENTED_EDGE('',*,*,#8729,.T.);+#8729 = EDGE_CURVE('',#8631,#8730,#8732,.T.);+#8730 = VERTEX_POINT('',#8731);+#8731 = CARTESIAN_POINT('',(0.706059591473,0.193492786951,1.7000001));+#8732 = SURFACE_CURVE('',#8733,(#8737,#8744),.PCURVE_S1.);+#8733 = LINE('',#8734,#8735);+#8734 = CARTESIAN_POINT('',(0.886316715473,0.193492786951,1.7000001));+#8735 = VECTOR('',#8736,1.);+#8736 = DIRECTION('',(-1.,0.,0.));+#8737 = PCURVE('',#8646,#8738);+#8738 = DEFINITIONAL_REPRESENTATION('',(#8739),#8743);+#8739 = LINE('',#8740,#8741);+#8740 = CARTESIAN_POINT('',(0.303474843378,0.416923382959));+#8741 = VECTOR('',#8742,1.);+#8742 = DIRECTION('',(-1.,0.));+#8743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8744 = PCURVE('',#3375,#8745);+#8745 = DEFINITIONAL_REPRESENTATION('',(#8746),#8750);+#8746 = LINE('',#8747,#8748);+#8747 = CARTESIAN_POINT('',(0.,-0.1));+#8748 = VECTOR('',#8749,1.);+#8749 = DIRECTION('',(1.,0.));+#8750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8751 = ORIENTED_EDGE('',*,*,#8752,.T.);+#8752 = EDGE_CURVE('',#8730,#8753,#8755,.T.);+#8753 = VERTEX_POINT('',#8754);+#8754 = CARTESIAN_POINT('',(0.706059591473,7.783830354555E-02,1.7000001)+ );+#8755 = SURFACE_CURVE('',#8756,(#8760,#8767),.PCURVE_S1.);+#8756 = LINE('',#8757,#8758);+#8757 = CARTESIAN_POINT('',(0.706059591473,0.193492786951,1.7000001));+#8758 = VECTOR('',#8759,1.);+#8759 = DIRECTION('',(0.,-1.,0.));+#8760 = PCURVE('',#8646,#8761);+#8761 = DEFINITIONAL_REPRESENTATION('',(#8762),#8766);+#8762 = LINE('',#8763,#8764);+#8763 = CARTESIAN_POINT('',(0.123217719378,0.416923382959));+#8764 = VECTOR('',#8765,1.);+#8765 = DIRECTION('',(0.,-1.));+#8766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8767 = PCURVE('',#3348,#8768);+#8768 = DEFINITIONAL_REPRESENTATION('',(#8769),#8773);+#8769 = LINE('',#8770,#8771);+#8770 = CARTESIAN_POINT('',(0.,-0.1));+#8771 = VECTOR('',#8772,1.);+#8772 = DIRECTION('',(1.,0.));+#8773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8774 = ORIENTED_EDGE('',*,*,#8775,.T.);+#8775 = EDGE_CURVE('',#8753,#8776,#8778,.T.);+#8776 = VERTEX_POINT('',#8777);+#8777 = CARTESIAN_POINT('',(0.733318754455,8.52439721015E-02,1.7000001)+ );+#8778 = SURFACE_CURVE('',#8779,(#8783,#8790),.PCURVE_S1.);+#8779 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8780,#8781,#8782),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8780 = CARTESIAN_POINT('',(0.706059591473,7.783830354555E-02,1.7000001)+ );+#8781 = CARTESIAN_POINT('',(0.719610389256,8.288046086024E-02,1.7000001)+ );+#8782 = CARTESIAN_POINT('',(0.733318754455,8.52439721015E-02,1.7000001)+ );+#8783 = PCURVE('',#8646,#8784);+#8784 = DEFINITIONAL_REPRESENTATION('',(#8785),#8789);+#8785 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8786,#8787,#8788),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8786 = CARTESIAN_POINT('',(0.123217719378,0.301268899553));+#8787 = CARTESIAN_POINT('',(0.136768517161,0.306311056868));+#8788 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#8789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8790 = PCURVE('',#3316,#8791);+#8791 = DEFINITIONAL_REPRESENTATION('',(#8792),#8796);+#8792 = LINE('',#8793,#8794);+#8793 = CARTESIAN_POINT('',(0.,-0.1));+#8794 = VECTOR('',#8795,1.);+#8795 = DIRECTION('',(1.,0.));+#8796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8797 = ORIENTED_EDGE('',*,*,#8798,.T.);+#8798 = EDGE_CURVE('',#8776,#8799,#8801,.T.);+#8799 = VERTEX_POINT('',#8800);+#8800 = CARTESIAN_POINT('',(0.76089305227,8.760748334276E-02,1.7000001)+ );+#8801 = SURFACE_CURVE('',#8802,(#8806,#8813),.PCURVE_S1.);+#8802 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8803,#8804,#8805),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8803 = CARTESIAN_POINT('',(0.733318754455,8.52439721015E-02,1.7000001)+ );+#8804 = CARTESIAN_POINT('',(0.747027119655,8.760748334276E-02,1.7000001)+ );+#8805 = CARTESIAN_POINT('',(0.76089305227,8.760748334276E-02,1.7000001)+ );+#8806 = PCURVE('',#8646,#8807);+#8807 = DEFINITIONAL_REPRESENTATION('',(#8808),#8812);+#8808 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8809,#8810,#8811),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8809 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#8810 = CARTESIAN_POINT('',(0.16418524756,0.31103807935));+#8811 = CARTESIAN_POINT('',(0.178051180175,0.31103807935));+#8812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8813 = PCURVE('',#3280,#8814);+#8814 = DEFINITIONAL_REPRESENTATION('',(#8815),#8819);+#8815 = LINE('',#8816,#8817);+#8816 = CARTESIAN_POINT('',(0.,-0.1));+#8817 = VECTOR('',#8818,1.);+#8818 = DIRECTION('',(1.,0.));+#8819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8820 = ORIENTED_EDGE('',*,*,#8821,.T.);+#8821 = EDGE_CURVE('',#8799,#8822,#8824,.T.);+#8822 = VERTEX_POINT('',#8823);+#8823 = CARTESIAN_POINT('',(0.876862670508,4.443401133572E-02,1.7000001)+ );+#8824 = SURFACE_CURVE('',#8825,(#8829,#8836),.PCURVE_S1.);+#8825 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8826,#8827,#8828),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8826 = CARTESIAN_POINT('',(0.76089305227,8.760748334276E-02,1.7000001)+ );+#8827 = CARTESIAN_POINT('',(0.834004333333,8.760748334276E-02,1.7000001)+ );+#8828 = CARTESIAN_POINT('',(0.876862670508,4.443401133572E-02,1.7000001)+ );+#8829 = PCURVE('',#8646,#8830);+#8830 = DEFINITIONAL_REPRESENTATION('',(#8831),#8835);+#8831 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8832,#8833,#8834),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8832 = CARTESIAN_POINT('',(0.178051180175,0.31103807935));+#8833 = CARTESIAN_POINT('',(0.251162461238,0.31103807935));+#8834 = CARTESIAN_POINT('',(0.294020798413,0.267864607343));+#8835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8836 = PCURVE('',#3241,#8837);+#8837 = DEFINITIONAL_REPRESENTATION('',(#8838),#8842);+#8838 = LINE('',#8839,#8840);+#8839 = CARTESIAN_POINT('',(0.,-0.1));+#8840 = VECTOR('',#8841,1.);+#8841 = DIRECTION('',(1.,0.));+#8842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8843 = ORIENTED_EDGE('',*,*,#8844,.T.);+#8844 = EDGE_CURVE('',#8822,#8845,#8847,.T.);+#8845 = VERTEX_POINT('',#8846);+#8846 = CARTESIAN_POINT('',(0.919721007683,-7.248101139869E-02,1.7000001+ ));+#8847 = SURFACE_CURVE('',#8848,(#8852,#8859),.PCURVE_S1.);+#8848 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8849,#8850,#8851),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8849 = CARTESIAN_POINT('',(0.876862670508,4.443401133572E-02,1.7000001)+ );+#8850 = CARTESIAN_POINT('',(0.919721007683,1.260539328673E-03,1.7000001)+ );+#8851 = CARTESIAN_POINT('',(0.919721007683,-7.248101139869E-02,1.7000001+ ));+#8852 = PCURVE('',#8646,#8853);+#8853 = DEFINITIONAL_REPRESENTATION('',(#8854),#8858);+#8854 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8855,#8856,#8857),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8855 = CARTESIAN_POINT('',(0.294020798413,0.267864607343));+#8856 = CARTESIAN_POINT('',(0.336879135588,0.224691135336));+#8857 = CARTESIAN_POINT('',(0.336879135588,0.150949584609));+#8858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8859 = PCURVE('',#3196,#8860);+#8860 = DEFINITIONAL_REPRESENTATION('',(#8861),#8865);+#8861 = LINE('',#8862,#8863);+#8862 = CARTESIAN_POINT('',(0.,-0.1));+#8863 = VECTOR('',#8864,1.);+#8864 = DIRECTION('',(1.,0.));+#8865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8866 = ORIENTED_EDGE('',*,*,#8867,.T.);+#8867 = EDGE_CURVE('',#8845,#8868,#8870,.T.);+#8868 = VERTEX_POINT('',#8869);+#8869 = CARTESIAN_POINT('',(0.874814294099,-0.189711168965,1.7000001));+#8870 = SURFACE_CURVE('',#8871,(#8875,#8882),.PCURVE_S1.);+#8871 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8872,#8873,#8874),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8872 = CARTESIAN_POINT('',(0.919721007683,-7.248101139869E-02,1.7000001+ ));+#8873 = CARTESIAN_POINT('',(0.919721007683,-0.14685283179,1.7000001));+#8874 = CARTESIAN_POINT('',(0.874814294099,-0.189711168965,1.7000001));+#8875 = PCURVE('',#8646,#8876);+#8876 = DEFINITIONAL_REPRESENTATION('',(#8877),#8881);+#8877 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8878,#8879,#8880),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8878 = CARTESIAN_POINT('',(0.336879135588,0.150949584609));+#8879 = CARTESIAN_POINT('',(0.336879135588,7.657776421688E-02));+#8880 = CARTESIAN_POINT('',(0.291972422004,3.3719427042E-02));+#8881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8882 = PCURVE('',#3151,#8883);+#8883 = DEFINITIONAL_REPRESENTATION('',(#8884),#8888);+#8884 = LINE('',#8885,#8886);+#8885 = CARTESIAN_POINT('',(0.,-0.1));+#8886 = VECTOR('',#8887,1.);+#8887 = DIRECTION('',(1.,0.));+#8888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8889 = ORIENTED_EDGE('',*,*,#8890,.T.);+#8890 = EDGE_CURVE('',#8868,#8891,#8893,.T.);+#8891 = VERTEX_POINT('',#8892);+#8892 = CARTESIAN_POINT('',(0.752069276969,-0.23256950614,1.7000001));+#8893 = SURFACE_CURVE('',#8894,(#8898,#8905),.PCURVE_S1.);+#8894 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8895,#8896,#8897),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8895 = CARTESIAN_POINT('',(0.874814294099,-0.189711168965,1.7000001));+#8896 = CARTESIAN_POINT('',(0.829907580515,-0.23256950614,1.7000001));+#8897 = CARTESIAN_POINT('',(0.752069276969,-0.23256950614,1.7000001));+#8898 = PCURVE('',#8646,#8899);+#8899 = DEFINITIONAL_REPRESENTATION('',(#8900),#8904);+#8900 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8901,#8902,#8903),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8901 = CARTESIAN_POINT('',(0.291972422004,3.3719427042E-02));+#8902 = CARTESIAN_POINT('',(0.24706570842,-9.138910132878E-03));+#8903 = CARTESIAN_POINT('',(0.169227404874,-9.138910132878E-03));+#8904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8905 = PCURVE('',#3106,#8906);+#8906 = DEFINITIONAL_REPRESENTATION('',(#8907),#8911);+#8907 = LINE('',#8908,#8909);+#8908 = CARTESIAN_POINT('',(0.,-0.1));+#8909 = VECTOR('',#8910,1.);+#8910 = DIRECTION('',(1.,0.));+#8911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8912 = ORIENTED_EDGE('',*,*,#8913,.T.);+#8913 = EDGE_CURVE('',#8891,#8914,#8916,.T.);+#8914 = VERTEX_POINT('',#8915);+#8915 = CARTESIAN_POINT('',(0.683527450973,-0.227527348825,1.7000001));+#8916 = SURFACE_CURVE('',#8917,(#8921,#8928),.PCURVE_S1.);+#8917 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8918,#8919,#8920),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8918 = CARTESIAN_POINT('',(0.752069276969,-0.23256950614,1.7000001));+#8919 = CARTESIAN_POINT('',(0.714568231941,-0.23256950614,1.7000001));+#8920 = CARTESIAN_POINT('',(0.683527450973,-0.227527348825,1.7000001));+#8921 = PCURVE('',#8646,#8922);+#8922 = DEFINITIONAL_REPRESENTATION('',(#8923),#8927);+#8923 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8924,#8925,#8926),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8924 = CARTESIAN_POINT('',(0.169227404874,-9.138910132878E-03));+#8925 = CARTESIAN_POINT('',(0.131726359846,-9.138910132878E-03));+#8926 = CARTESIAN_POINT('',(0.100685578878,-4.096752818187E-03));+#8927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8928 = PCURVE('',#3064,#8929);+#8929 = DEFINITIONAL_REPRESENTATION('',(#8930),#8934);+#8930 = LINE('',#8931,#8932);+#8931 = CARTESIAN_POINT('',(0.,-0.1));+#8932 = VECTOR('',#8933,1.);+#8933 = DIRECTION('',(1.,0.));+#8934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8935 = ORIENTED_EDGE('',*,*,#8936,.T.);+#8936 = EDGE_CURVE('',#8914,#8937,#8939,.T.);+#8937 = VERTEX_POINT('',#8938);+#8938 = CARTESIAN_POINT('',(0.627906153095,-0.212400876881,1.7000001));+#8939 = SURFACE_CURVE('',#8940,(#8944,#8951),.PCURVE_S1.);+#8940 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8941,#8942,#8943),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8941 = CARTESIAN_POINT('',(0.683527450973,-0.227527348825,1.7000001));+#8942 = CARTESIAN_POINT('',(0.652486670004,-0.222485191511,1.7000001));+#8943 = CARTESIAN_POINT('',(0.627906153095,-0.212400876881,1.7000001));+#8944 = PCURVE('',#8646,#8945);+#8945 = DEFINITIONAL_REPRESENTATION('',(#8946),#8950);+#8946 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8947,#8948,#8949),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8947 = CARTESIAN_POINT('',(0.100685578878,-4.096752818187E-03));+#8948 = CARTESIAN_POINT('',(6.964479790918E-02,9.454044965046E-04));+#8949 = CARTESIAN_POINT('',(4.506428100005E-02,1.102971912589E-02));+#8950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8951 = PCURVE('',#3028,#8952);+#8952 = DEFINITIONAL_REPRESENTATION('',(#8953),#8957);+#8953 = LINE('',#8954,#8955);+#8954 = CARTESIAN_POINT('',(0.,-0.1));+#8955 = VECTOR('',#8956,1.);+#8956 = DIRECTION('',(1.,0.));+#8957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8958 = ORIENTED_EDGE('',*,*,#8959,.T.);+#8959 = EDGE_CURVE('',#8937,#8960,#8962,.T.);+#8960 = VERTEX_POINT('',#8961);+#8961 = CARTESIAN_POINT('',(0.627906153095,-0.147798236287,1.7000001));+#8962 = SURFACE_CURVE('',#8963,(#8967,#8974),.PCURVE_S1.);+#8963 = LINE('',#8964,#8965);+#8964 = CARTESIAN_POINT('',(0.627906153095,-0.212400876881,1.7000001));+#8965 = VECTOR('',#8966,1.);+#8966 = DIRECTION('',(0.,1.,0.));+#8967 = PCURVE('',#8646,#8968);+#8968 = DEFINITIONAL_REPRESENTATION('',(#8969),#8973);+#8969 = LINE('',#8970,#8971);+#8970 = CARTESIAN_POINT('',(4.506428100005E-02,1.102971912589E-02));+#8971 = VECTOR('',#8972,1.);+#8972 = DIRECTION('',(0.,1.));+#8973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8974 = PCURVE('',#2997,#8975);+#8975 = DEFINITIONAL_REPRESENTATION('',(#8976),#8980);+#8976 = LINE('',#8977,#8978);+#8977 = CARTESIAN_POINT('',(0.,-0.1));+#8978 = VECTOR('',#8979,1.);+#8979 = DIRECTION('',(1.,0.));+#8980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8981 = ORIENTED_EDGE('',*,*,#8982,.T.);+#8982 = EDGE_CURVE('',#8960,#8983,#8985,.T.);+#8983 = VERTEX_POINT('',#8984);+#8984 = CARTESIAN_POINT('',(0.686206097046,-0.171275781283,1.7000001));+#8985 = SURFACE_CURVE('',#8986,(#8990,#8997),.PCURVE_S1.);+#8986 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8987,#8988,#8989),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8987 = CARTESIAN_POINT('',(0.627906153095,-0.147798236287,1.7000001));+#8988 = CARTESIAN_POINT('',(0.656898557655,-0.163554977895,1.7000001));+#8989 = CARTESIAN_POINT('',(0.686206097046,-0.171275781283,1.7000001));+#8990 = PCURVE('',#8646,#8991);+#8991 = DEFINITIONAL_REPRESENTATION('',(#8992),#8996);+#8992 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8993,#8994,#8995),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8993 = CARTESIAN_POINT('',(4.506428100005E-02,7.563235972037E-02));+#8994 = CARTESIAN_POINT('',(7.405668555953E-02,5.987561811196E-02));+#8995 = CARTESIAN_POINT('',(0.103364224951,5.215481472384E-02));+#8996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8997 = PCURVE('',#2965,#8998);+#8998 = DEFINITIONAL_REPRESENTATION('',(#8999),#9003);+#8999 = LINE('',#9000,#9001);+#9000 = CARTESIAN_POINT('',(0.,-0.1));+#9001 = VECTOR('',#9002,1.);+#9002 = DIRECTION('',(1.,0.));+#9003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9004 = ORIENTED_EDGE('',*,*,#9005,.T.);+#9005 = EDGE_CURVE('',#8983,#9006,#9008,.T.);+#9006 = VERTEX_POINT('',#9007);+#9007 = CARTESIAN_POINT('',(0.746081715158,-0.178996584672,1.7000001));+#9008 = SURFACE_CURVE('',#9009,(#9013,#9020),.PCURVE_S1.);+#9009 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9010,#9011,#9012),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9010 = CARTESIAN_POINT('',(0.686206097046,-0.171275781283,1.7000001));+#9011 = CARTESIAN_POINT('',(0.715513636438,-0.178996584672,1.7000001));+#9012 = CARTESIAN_POINT('',(0.746081715158,-0.178996584672,1.7000001));+#9013 = PCURVE('',#8646,#9014);+#9014 = DEFINITIONAL_REPRESENTATION('',(#9015),#9019);+#9015 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9016,#9017,#9018),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9016 = CARTESIAN_POINT('',(0.103364224951,5.215481472384E-02));+#9017 = CARTESIAN_POINT('',(0.132671764343,4.443401133572E-02));+#9018 = CARTESIAN_POINT('',(0.163239843063,4.443401133572E-02));+#9019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9020 = PCURVE('',#2929,#9021);+#9021 = DEFINITIONAL_REPRESENTATION('',(#9022),#9026);+#9022 = LINE('',#9023,#9024);+#9023 = CARTESIAN_POINT('',(0.,-0.1));+#9024 = VECTOR('',#9025,1.);+#9025 = DIRECTION('',(1.,0.));+#9026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9027 = ORIENTED_EDGE('',*,*,#9028,.T.);+#9028 = EDGE_CURVE('',#9006,#9029,#9031,.T.);+#9029 = VERTEX_POINT('',#9030);+#9030 = CARTESIAN_POINT('',(0.827228934442,-0.151264719441,1.7000001));+#9031 = SURFACE_CURVE('',#9032,(#9036,#9043),.PCURVE_S1.);+#9032 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9033,#9034,#9035),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9033 = CARTESIAN_POINT('',(0.746081715158,-0.178996584672,1.7000001));+#9034 = CARTESIAN_POINT('',(0.79870923213,-0.178996584672,1.7000001));+#9035 = CARTESIAN_POINT('',(0.827228934442,-0.151264719441,1.7000001));+#9036 = PCURVE('',#8646,#9037);+#9037 = DEFINITIONAL_REPRESENTATION('',(#9038),#9042);+#9038 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9039,#9040,#9041),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9039 = CARTESIAN_POINT('',(0.163239843063,4.443401133572E-02));+#9040 = CARTESIAN_POINT('',(0.215867360035,4.443401133572E-02));+#9041 = CARTESIAN_POINT('',(0.244387062346,7.216587656652E-02));+#9042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9043 = PCURVE('',#2893,#9044);+#9044 = DEFINITIONAL_REPRESENTATION('',(#9045),#9049);+#9045 = LINE('',#9046,#9047);+#9046 = CARTESIAN_POINT('',(0.,-0.1));+#9047 = VECTOR('',#9048,1.);+#9048 = DIRECTION('',(1.,0.));+#9049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9050 = ORIENTED_EDGE('',*,*,#9051,.T.);+#9051 = EDGE_CURVE('',#9029,#9052,#9054,.T.);+#9052 = VERTEX_POINT('',#9053);+#9053 = CARTESIAN_POINT('',(0.855748636753,-7.248101139869E-02,1.7000001+ ));+#9054 = SURFACE_CURVE('',#9055,(#9059,#9066),.PCURVE_S1.);+#9055 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9056,#9057,#9058),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9056 = CARTESIAN_POINT('',(0.827228934442,-0.151264719441,1.7000001));+#9057 = CARTESIAN_POINT('',(0.855748636753,-0.12353285421,1.7000001));+#9058 = CARTESIAN_POINT('',(0.855748636753,-7.248101139869E-02,1.7000001+ ));+#9059 = PCURVE('',#8646,#9060);+#9060 = DEFINITIONAL_REPRESENTATION('',(#9061),#9065);+#9061 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9062,#9063,#9064),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9062 = CARTESIAN_POINT('',(0.244387062346,7.216587656652E-02));+#9063 = CARTESIAN_POINT('',(0.272906764658,9.989774179732E-02));+#9064 = CARTESIAN_POINT('',(0.272906764658,0.150949584609));+#9065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9066 = PCURVE('',#2857,#9067);+#9067 = DEFINITIONAL_REPRESENTATION('',(#9068),#9072);+#9068 = LINE('',#9069,#9070);+#9069 = CARTESIAN_POINT('',(0.,-0.1));+#9070 = VECTOR('',#9071,1.);+#9071 = DIRECTION('',(1.,0.));+#9072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9073 = ORIENTED_EDGE('',*,*,#9074,.T.);+#9074 = EDGE_CURVE('',#9052,#9075,#9077,.T.);+#9075 = VERTEX_POINT('',#9076);+#9076 = CARTESIAN_POINT('',(0.826283529945,5.987561811196E-03,1.7000001)+ );+#9077 = SURFACE_CURVE('',#9078,(#9082,#9089),.PCURVE_S1.);+#9078 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9079,#9080,#9081),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9079 = CARTESIAN_POINT('',(0.855748636753,-7.248101139869E-02,1.7000001+ ));+#9080 = CARTESIAN_POINT('',(0.855748636753,-2.205943825177E-02,1.7000001+ ));+#9081 = CARTESIAN_POINT('',(0.826283529945,5.987561811196E-03,1.7000001)+ );+#9082 = PCURVE('',#8646,#9083);+#9083 = DEFINITIONAL_REPRESENTATION('',(#9084),#9088);+#9084 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9085,#9086,#9087),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9085 = CARTESIAN_POINT('',(0.272906764658,0.150949584609));+#9086 = CARTESIAN_POINT('',(0.272906764658,0.201371157755));+#9087 = CARTESIAN_POINT('',(0.24344165785,0.229418157818));+#9088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9089 = PCURVE('',#2818,#9090);+#9090 = DEFINITIONAL_REPRESENTATION('',(#9091),#9095);+#9091 = LINE('',#9092,#9093);+#9092 = CARTESIAN_POINT('',(0.,-0.1));+#9093 = VECTOR('',#9094,1.);+#9094 = DIRECTION('',(1.,0.));+#9095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9096 = ORIENTED_EDGE('',*,*,#9097,.T.);+#9097 = EDGE_CURVE('',#9075,#9098,#9100,.T.);+#9098 = VERTEX_POINT('',#9099);+#9099 = CARTESIAN_POINT('',(0.744190906165,3.403456187417E-02,1.7000001)+ );+#9100 = SURFACE_CURVE('',#9101,(#9105,#9112),.PCURVE_S1.);+#9101 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9102,#9103,#9104),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9102 = CARTESIAN_POINT('',(0.826283529945,5.987561811196E-03,1.7000001)+ );+#9103 = CARTESIAN_POINT('',(0.796818423137,3.403456187417E-02,1.7000001)+ );+#9104 = CARTESIAN_POINT('',(0.744190906165,3.403456187417E-02,1.7000001)+ );+#9105 = PCURVE('',#8646,#9106);+#9106 = DEFINITIONAL_REPRESENTATION('',(#9107),#9111);+#9107 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9108,#9109,#9110),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9108 = CARTESIAN_POINT('',(0.24344165785,0.229418157818));+#9109 = CARTESIAN_POINT('',(0.213976551042,0.257465157881));+#9110 = CARTESIAN_POINT('',(0.16134903407,0.257465157881));+#9111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9112 = PCURVE('',#2776,#9113);+#9113 = DEFINITIONAL_REPRESENTATION('',(#9114),#9118);+#9114 = LINE('',#9115,#9116);+#9115 = CARTESIAN_POINT('',(0.,-0.1));+#9116 = VECTOR('',#9117,1.);+#9117 = DIRECTION('',(1.,0.));+#9118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9119 = ORIENTED_EDGE('',*,*,#9120,.T.);+#9120 = EDGE_CURVE('',#9098,#9121,#9123,.T.);+#9121 = VERTEX_POINT('',#9122);+#9122 = CARTESIAN_POINT('',(0.694399602683,2.820456747906E-02,1.7000001)+ );+#9123 = SURFACE_CURVE('',#9124,(#9128,#9135),.PCURVE_S1.);+#9124 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9125,#9126,#9127),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9125 = CARTESIAN_POINT('',(0.744190906165,3.403456187417E-02,1.7000001)+ );+#9126 = CARTESIAN_POINT('',(0.71866498476,3.403456187417E-02,1.7000001)+ );+#9127 = CARTESIAN_POINT('',(0.694399602683,2.820456747906E-02,1.7000001)+ );+#9128 = PCURVE('',#8646,#9129);+#9129 = DEFINITIONAL_REPRESENTATION('',(#9130),#9134);+#9130 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9131,#9132,#9133),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9131 = CARTESIAN_POINT('',(0.16134903407,0.257465157881));+#9132 = CARTESIAN_POINT('',(0.135823112664,0.257465157881));+#9133 = CARTESIAN_POINT('',(0.111557730588,0.251635163486));+#9134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9135 = PCURVE('',#2740,#9136);+#9136 = DEFINITIONAL_REPRESENTATION('',(#9137),#9141);+#9137 = LINE('',#9138,#9139);+#9138 = CARTESIAN_POINT('',(0.,-0.1));+#9139 = VECTOR('',#9140,1.);+#9140 = DIRECTION('',(1.,0.));+#9141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9142 = ORIENTED_EDGE('',*,*,#9143,.T.);+#9143 = EDGE_CURVE('',#9121,#8683,#9144,.T.);+#9144 = SURFACE_CURVE('',#9145,(#9149,#9156),.PCURVE_S1.);+#9145 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9146,#9147,#9148),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9146 = CARTESIAN_POINT('',(0.694399602683,2.820456747906E-02,1.7000001)+ );+#9147 = CARTESIAN_POINT('',(0.670134220606,2.237457308394E-02,1.7000001)+ );+#9148 = CARTESIAN_POINT('',(0.648074782354,1.071458429372E-02,1.7000001)+ );+#9149 = PCURVE('',#8646,#9150);+#9150 = DEFINITIONAL_REPRESENTATION('',(#9151),#9155);+#9151 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9152,#9153,#9154),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9152 = CARTESIAN_POINT('',(0.111557730588,0.251635163486));+#9153 = CARTESIAN_POINT('',(8.729234851059E-02,0.245805169091));+#9154 = CARTESIAN_POINT('',(6.523291025882E-02,0.234145180301));+#9155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9156 = PCURVE('',#2704,#9157);+#9157 = DEFINITIONAL_REPRESENTATION('',(#9158),#9162);+#9158 = LINE('',#9159,#9160);+#9159 = CARTESIAN_POINT('',(0.,-0.1));+#9160 = VECTOR('',#9161,1.);+#9161 = DIRECTION('',(1.,0.));+#9162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9163 = ADVANCED_FACE('',(#9164),#3375,.T.);+#9164 = FACE_BOUND('',#9165,.T.);+#9165 = EDGE_LOOP('',(#9166,#9167,#9168,#9169));+#9166 = ORIENTED_EDGE('',*,*,#3359,.T.);+#9167 = ORIENTED_EDGE('',*,*,#8658,.T.);+#9168 = ORIENTED_EDGE('',*,*,#8729,.T.);+#9169 = ORIENTED_EDGE('',*,*,#9170,.F.);+#9170 = EDGE_CURVE('',#3333,#8730,#9171,.T.);+#9171 = SURFACE_CURVE('',#9172,(#9176,#9183),.PCURVE_S1.);+#9172 = LINE('',#9173,#9174);+#9173 = CARTESIAN_POINT('',(0.706059591473,0.193492786951,1.8000001));+#9174 = VECTOR('',#9175,1.);+#9175 = DIRECTION('',(-0.,-0.,-1.));+#9176 = PCURVE('',#3375,#9177);+#9177 = DEFINITIONAL_REPRESENTATION('',(#9178),#9182);+#9178 = LINE('',#9179,#9180);+#9179 = CARTESIAN_POINT('',(0.180257124,0.));+#9180 = VECTOR('',#9181,1.);+#9181 = DIRECTION('',(0.,-1.));+#9182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9183 = PCURVE('',#3348,#9184);+#9184 = DEFINITIONAL_REPRESENTATION('',(#9185),#9189);+#9185 = LINE('',#9186,#9187);+#9186 = CARTESIAN_POINT('',(0.,0.));+#9187 = VECTOR('',#9188,1.);+#9188 = DIRECTION('',(0.,-1.));+#9189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9190 = ADVANCED_FACE('',(#9191),#3348,.T.);+#9191 = FACE_BOUND('',#9192,.T.);+#9192 = EDGE_LOOP('',(#9193,#9194,#9195,#9196));+#9193 = ORIENTED_EDGE('',*,*,#3332,.T.);+#9194 = ORIENTED_EDGE('',*,*,#9170,.T.);+#9195 = ORIENTED_EDGE('',*,*,#8752,.T.);+#9196 = ORIENTED_EDGE('',*,*,#9197,.F.);+#9197 = EDGE_CURVE('',#3297,#8753,#9198,.T.);+#9198 = SURFACE_CURVE('',#9199,(#9203,#9210),.PCURVE_S1.);+#9199 = LINE('',#9200,#9201);+#9200 = CARTESIAN_POINT('',(0.706059591473,7.783830354555E-02,1.8000001)+ );+#9201 = VECTOR('',#9202,1.);+#9202 = DIRECTION('',(-0.,-0.,-1.));+#9203 = PCURVE('',#3348,#9204);+#9204 = DEFINITIONAL_REPRESENTATION('',(#9205),#9209);+#9205 = LINE('',#9206,#9207);+#9206 = CARTESIAN_POINT('',(0.115654483406,0.));+#9207 = VECTOR('',#9208,1.);+#9208 = DIRECTION('',(0.,-1.));+#9209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9210 = PCURVE('',#3316,#9211);+#9211 = DEFINITIONAL_REPRESENTATION('',(#9212),#9216);+#9212 = LINE('',#9213,#9214);+#9213 = CARTESIAN_POINT('',(0.,0.));+#9214 = VECTOR('',#9215,1.);+#9215 = DIRECTION('',(0.,-1.));+#9216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9217 = ADVANCED_FACE('',(#9218),#3316,.T.);+#9218 = FACE_BOUND('',#9219,.T.);+#9219 = EDGE_LOOP('',(#9220,#9221,#9222,#9223));+#9220 = ORIENTED_EDGE('',*,*,#3296,.T.);+#9221 = ORIENTED_EDGE('',*,*,#9197,.T.);+#9222 = ORIENTED_EDGE('',*,*,#8775,.T.);+#9223 = ORIENTED_EDGE('',*,*,#9224,.F.);+#9224 = EDGE_CURVE('',#3261,#8776,#9225,.T.);+#9225 = SURFACE_CURVE('',#9226,(#9230,#9237),.PCURVE_S1.);+#9226 = LINE('',#9227,#9228);+#9227 = CARTESIAN_POINT('',(0.733318754455,8.52439721015E-02,1.8000001)+ );+#9228 = VECTOR('',#9229,1.);+#9229 = DIRECTION('',(-0.,-0.,-1.));+#9230 = PCURVE('',#3316,#9231);+#9231 = DEFINITIONAL_REPRESENTATION('',(#9232),#9236);+#9232 = LINE('',#9233,#9234);+#9233 = CARTESIAN_POINT('',(1.,0.));+#9234 = VECTOR('',#9235,1.);+#9235 = DIRECTION('',(0.,-1.));+#9236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9237 = PCURVE('',#3280,#9238);+#9238 = DEFINITIONAL_REPRESENTATION('',(#9239),#9243);+#9239 = LINE('',#9240,#9241);+#9240 = CARTESIAN_POINT('',(0.,0.));+#9241 = VECTOR('',#9242,1.);+#9242 = DIRECTION('',(0.,-1.));+#9243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9244 = ADVANCED_FACE('',(#9245),#3280,.T.);+#9245 = FACE_BOUND('',#9246,.T.);+#9246 = EDGE_LOOP('',(#9247,#9248,#9249,#9250));+#9247 = ORIENTED_EDGE('',*,*,#3260,.T.);+#9248 = ORIENTED_EDGE('',*,*,#9224,.T.);+#9249 = ORIENTED_EDGE('',*,*,#8798,.T.);+#9250 = ORIENTED_EDGE('',*,*,#9251,.F.);+#9251 = EDGE_CURVE('',#3216,#8799,#9252,.T.);+#9252 = SURFACE_CURVE('',#9253,(#9257,#9264),.PCURVE_S1.);+#9253 = LINE('',#9254,#9255);+#9254 = CARTESIAN_POINT('',(0.76089305227,8.760748334276E-02,1.8000001)+ );+#9255 = VECTOR('',#9256,1.);+#9256 = DIRECTION('',(-0.,-0.,-1.));+#9257 = PCURVE('',#3280,#9258);+#9258 = DEFINITIONAL_REPRESENTATION('',(#9259),#9263);+#9259 = LINE('',#9260,#9261);+#9260 = CARTESIAN_POINT('',(1.,0.));+#9261 = VECTOR('',#9262,1.);+#9262 = DIRECTION('',(0.,-1.));+#9263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9264 = PCURVE('',#3241,#9265);+#9265 = DEFINITIONAL_REPRESENTATION('',(#9266),#9270);+#9266 = LINE('',#9267,#9268);+#9267 = CARTESIAN_POINT('',(0.,0.));+#9268 = VECTOR('',#9269,1.);+#9269 = DIRECTION('',(0.,-1.));+#9270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9271 = ADVANCED_FACE('',(#9272),#3241,.T.);+#9272 = FACE_BOUND('',#9273,.T.);+#9273 = EDGE_LOOP('',(#9274,#9275,#9276,#9277));+#9274 = ORIENTED_EDGE('',*,*,#3215,.T.);+#9275 = ORIENTED_EDGE('',*,*,#9251,.T.);+#9276 = ORIENTED_EDGE('',*,*,#8821,.T.);+#9277 = ORIENTED_EDGE('',*,*,#9278,.F.);+#9278 = EDGE_CURVE('',#3171,#8822,#9279,.T.);+#9279 = SURFACE_CURVE('',#9280,(#9284,#9291),.PCURVE_S1.);+#9280 = LINE('',#9281,#9282);+#9281 = CARTESIAN_POINT('',(0.876862670508,4.443401133572E-02,1.8000001)+ );+#9282 = VECTOR('',#9283,1.);+#9283 = DIRECTION('',(-0.,-0.,-1.));+#9284 = PCURVE('',#3241,#9285);+#9285 = DEFINITIONAL_REPRESENTATION('',(#9286),#9290);+#9286 = LINE('',#9287,#9288);+#9287 = CARTESIAN_POINT('',(1.,0.));+#9288 = VECTOR('',#9289,1.);+#9289 = DIRECTION('',(0.,-1.));+#9290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9291 = PCURVE('',#3196,#9292);+#9292 = DEFINITIONAL_REPRESENTATION('',(#9293),#9297);+#9293 = LINE('',#9294,#9295);+#9294 = CARTESIAN_POINT('',(0.,0.));+#9295 = VECTOR('',#9296,1.);+#9296 = DIRECTION('',(0.,-1.));+#9297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9298 = ADVANCED_FACE('',(#9299),#3196,.T.);+#9299 = FACE_BOUND('',#9300,.T.);+#9300 = EDGE_LOOP('',(#9301,#9302,#9303,#9304));+#9301 = ORIENTED_EDGE('',*,*,#3170,.T.);+#9302 = ORIENTED_EDGE('',*,*,#9278,.T.);+#9303 = ORIENTED_EDGE('',*,*,#8844,.T.);+#9304 = ORIENTED_EDGE('',*,*,#9305,.F.);+#9305 = EDGE_CURVE('',#3126,#8845,#9306,.T.);+#9306 = SURFACE_CURVE('',#9307,(#9311,#9318),.PCURVE_S1.);+#9307 = LINE('',#9308,#9309);+#9308 = CARTESIAN_POINT('',(0.919721007683,-7.248101139869E-02,1.8000001+ ));+#9309 = VECTOR('',#9310,1.);+#9310 = DIRECTION('',(-0.,-0.,-1.));+#9311 = PCURVE('',#3196,#9312);+#9312 = DEFINITIONAL_REPRESENTATION('',(#9313),#9317);+#9313 = LINE('',#9314,#9315);+#9314 = CARTESIAN_POINT('',(1.,0.));+#9315 = VECTOR('',#9316,1.);+#9316 = DIRECTION('',(0.,-1.));+#9317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9318 = PCURVE('',#3151,#9319);+#9319 = DEFINITIONAL_REPRESENTATION('',(#9320),#9324);+#9320 = LINE('',#9321,#9322);+#9321 = CARTESIAN_POINT('',(0.,0.));+#9322 = VECTOR('',#9323,1.);+#9323 = DIRECTION('',(0.,-1.));+#9324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9325 = ADVANCED_FACE('',(#9326),#3151,.T.);+#9326 = FACE_BOUND('',#9327,.T.);+#9327 = EDGE_LOOP('',(#9328,#9329,#9330,#9331));+#9328 = ORIENTED_EDGE('',*,*,#3125,.T.);+#9329 = ORIENTED_EDGE('',*,*,#9305,.T.);+#9330 = ORIENTED_EDGE('',*,*,#8867,.T.);+#9331 = ORIENTED_EDGE('',*,*,#9332,.F.);+#9332 = EDGE_CURVE('',#3081,#8868,#9333,.T.);+#9333 = SURFACE_CURVE('',#9334,(#9338,#9345),.PCURVE_S1.);+#9334 = LINE('',#9335,#9336);+#9335 = CARTESIAN_POINT('',(0.874814294099,-0.189711168965,1.8000001));+#9336 = VECTOR('',#9337,1.);+#9337 = DIRECTION('',(-0.,-0.,-1.));+#9338 = PCURVE('',#3151,#9339);+#9339 = DEFINITIONAL_REPRESENTATION('',(#9340),#9344);+#9340 = LINE('',#9341,#9342);+#9341 = CARTESIAN_POINT('',(1.,0.));+#9342 = VECTOR('',#9343,1.);+#9343 = DIRECTION('',(0.,-1.));+#9344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9345 = PCURVE('',#3106,#9346);+#9346 = DEFINITIONAL_REPRESENTATION('',(#9347),#9351);+#9347 = LINE('',#9348,#9349);+#9348 = CARTESIAN_POINT('',(0.,0.));+#9349 = VECTOR('',#9350,1.);+#9350 = DIRECTION('',(0.,-1.));+#9351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9352 = ADVANCED_FACE('',(#9353),#3106,.T.);+#9353 = FACE_BOUND('',#9354,.T.);+#9354 = EDGE_LOOP('',(#9355,#9356,#9357,#9358));+#9355 = ORIENTED_EDGE('',*,*,#3080,.T.);+#9356 = ORIENTED_EDGE('',*,*,#9332,.T.);+#9357 = ORIENTED_EDGE('',*,*,#8890,.T.);+#9358 = ORIENTED_EDGE('',*,*,#9359,.F.);+#9359 = EDGE_CURVE('',#3045,#8891,#9360,.T.);+#9360 = SURFACE_CURVE('',#9361,(#9365,#9372),.PCURVE_S1.);+#9361 = LINE('',#9362,#9363);+#9362 = CARTESIAN_POINT('',(0.752069276969,-0.23256950614,1.8000001));+#9363 = VECTOR('',#9364,1.);+#9364 = DIRECTION('',(-0.,-0.,-1.));+#9365 = PCURVE('',#3106,#9366);+#9366 = DEFINITIONAL_REPRESENTATION('',(#9367),#9371);+#9367 = LINE('',#9368,#9369);+#9368 = CARTESIAN_POINT('',(1.,0.));+#9369 = VECTOR('',#9370,1.);+#9370 = DIRECTION('',(0.,-1.));+#9371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9372 = PCURVE('',#3064,#9373);+#9373 = DEFINITIONAL_REPRESENTATION('',(#9374),#9378);+#9374 = LINE('',#9375,#9376);+#9375 = CARTESIAN_POINT('',(0.,0.));+#9376 = VECTOR('',#9377,1.);+#9377 = DIRECTION('',(0.,-1.));+#9378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9379 = ADVANCED_FACE('',(#9380),#3064,.T.);+#9380 = FACE_BOUND('',#9381,.T.);+#9381 = EDGE_LOOP('',(#9382,#9383,#9384,#9385));+#9382 = ORIENTED_EDGE('',*,*,#3044,.T.);+#9383 = ORIENTED_EDGE('',*,*,#9359,.T.);+#9384 = ORIENTED_EDGE('',*,*,#8913,.T.);+#9385 = ORIENTED_EDGE('',*,*,#9386,.F.);+#9386 = EDGE_CURVE('',#3009,#8914,#9387,.T.);+#9387 = SURFACE_CURVE('',#9388,(#9392,#9399),.PCURVE_S1.);+#9388 = LINE('',#9389,#9390);+#9389 = CARTESIAN_POINT('',(0.683527450973,-0.227527348825,1.8000001));+#9390 = VECTOR('',#9391,1.);+#9391 = DIRECTION('',(-0.,-0.,-1.));+#9392 = PCURVE('',#3064,#9393);+#9393 = DEFINITIONAL_REPRESENTATION('',(#9394),#9398);+#9394 = LINE('',#9395,#9396);+#9395 = CARTESIAN_POINT('',(1.,0.));+#9396 = VECTOR('',#9397,1.);+#9397 = DIRECTION('',(0.,-1.));+#9398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9399 = PCURVE('',#3028,#9400);+#9400 = DEFINITIONAL_REPRESENTATION('',(#9401),#9405);+#9401 = LINE('',#9402,#9403);+#9402 = CARTESIAN_POINT('',(0.,0.));+#9403 = VECTOR('',#9404,1.);+#9404 = DIRECTION('',(0.,-1.));+#9405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9406 = ADVANCED_FACE('',(#9407),#3028,.T.);+#9407 = FACE_BOUND('',#9408,.T.);+#9408 = EDGE_LOOP('',(#9409,#9410,#9411,#9412));+#9409 = ORIENTED_EDGE('',*,*,#3008,.T.);+#9410 = ORIENTED_EDGE('',*,*,#9386,.T.);+#9411 = ORIENTED_EDGE('',*,*,#8936,.T.);+#9412 = ORIENTED_EDGE('',*,*,#9413,.F.);+#9413 = EDGE_CURVE('',#2982,#8937,#9414,.T.);+#9414 = SURFACE_CURVE('',#9415,(#9419,#9426),.PCURVE_S1.);+#9415 = LINE('',#9416,#9417);+#9416 = CARTESIAN_POINT('',(0.627906153095,-0.212400876881,1.8000001));+#9417 = VECTOR('',#9418,1.);+#9418 = DIRECTION('',(-0.,-0.,-1.));+#9419 = PCURVE('',#3028,#9420);+#9420 = DEFINITIONAL_REPRESENTATION('',(#9421),#9425);+#9421 = LINE('',#9422,#9423);+#9422 = CARTESIAN_POINT('',(1.,0.));+#9423 = VECTOR('',#9424,1.);+#9424 = DIRECTION('',(0.,-1.));+#9425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9426 = PCURVE('',#2997,#9427);+#9427 = DEFINITIONAL_REPRESENTATION('',(#9428),#9432);+#9428 = LINE('',#9429,#9430);+#9429 = CARTESIAN_POINT('',(0.,0.));+#9430 = VECTOR('',#9431,1.);+#9431 = DIRECTION('',(0.,-1.));+#9432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9433 = ADVANCED_FACE('',(#9434),#2997,.T.);+#9434 = FACE_BOUND('',#9435,.T.);+#9435 = EDGE_LOOP('',(#9436,#9437,#9438,#9439));+#9436 = ORIENTED_EDGE('',*,*,#2981,.T.);+#9437 = ORIENTED_EDGE('',*,*,#9413,.T.);+#9438 = ORIENTED_EDGE('',*,*,#8959,.T.);+#9439 = ORIENTED_EDGE('',*,*,#9440,.F.);+#9440 = EDGE_CURVE('',#2946,#8960,#9441,.T.);+#9441 = SURFACE_CURVE('',#9442,(#9446,#9453),.PCURVE_S1.);+#9442 = LINE('',#9443,#9444);+#9443 = CARTESIAN_POINT('',(0.627906153095,-0.147798236287,1.8000001));+#9444 = VECTOR('',#9445,1.);+#9445 = DIRECTION('',(-0.,-0.,-1.));+#9446 = PCURVE('',#2997,#9447);+#9447 = DEFINITIONAL_REPRESENTATION('',(#9448),#9452);+#9448 = LINE('',#9449,#9450);+#9449 = CARTESIAN_POINT('',(6.460264059448E-02,0.));+#9450 = VECTOR('',#9451,1.);+#9451 = DIRECTION('',(0.,-1.));+#9452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9453 = PCURVE('',#2965,#9454);+#9454 = DEFINITIONAL_REPRESENTATION('',(#9455),#9459);+#9455 = LINE('',#9456,#9457);+#9456 = CARTESIAN_POINT('',(0.,0.));+#9457 = VECTOR('',#9458,1.);+#9458 = DIRECTION('',(0.,-1.));+#9459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9460 = ADVANCED_FACE('',(#9461),#2965,.T.);+#9461 = FACE_BOUND('',#9462,.T.);+#9462 = EDGE_LOOP('',(#9463,#9464,#9465,#9466));+#9463 = ORIENTED_EDGE('',*,*,#2945,.T.);+#9464 = ORIENTED_EDGE('',*,*,#9440,.T.);+#9465 = ORIENTED_EDGE('',*,*,#8982,.T.);+#9466 = ORIENTED_EDGE('',*,*,#9467,.F.);+#9467 = EDGE_CURVE('',#2910,#8983,#9468,.T.);+#9468 = SURFACE_CURVE('',#9469,(#9473,#9480),.PCURVE_S1.);+#9469 = LINE('',#9470,#9471);+#9470 = CARTESIAN_POINT('',(0.686206097046,-0.171275781283,1.8000001));+#9471 = VECTOR('',#9472,1.);+#9472 = DIRECTION('',(-0.,-0.,-1.));+#9473 = PCURVE('',#2965,#9474);+#9474 = DEFINITIONAL_REPRESENTATION('',(#9475),#9479);+#9475 = LINE('',#9476,#9477);+#9476 = CARTESIAN_POINT('',(1.,0.));+#9477 = VECTOR('',#9478,1.);+#9478 = DIRECTION('',(0.,-1.));+#9479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9480 = PCURVE('',#2929,#9481);+#9481 = DEFINITIONAL_REPRESENTATION('',(#9482),#9486);+#9482 = LINE('',#9483,#9484);+#9483 = CARTESIAN_POINT('',(0.,0.));+#9484 = VECTOR('',#9485,1.);+#9485 = DIRECTION('',(0.,-1.));+#9486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9487 = ADVANCED_FACE('',(#9488),#2929,.T.);+#9488 = FACE_BOUND('',#9489,.T.);+#9489 = EDGE_LOOP('',(#9490,#9491,#9492,#9493));+#9490 = ORIENTED_EDGE('',*,*,#2909,.T.);+#9491 = ORIENTED_EDGE('',*,*,#9467,.T.);+#9492 = ORIENTED_EDGE('',*,*,#9005,.T.);+#9493 = ORIENTED_EDGE('',*,*,#9494,.F.);+#9494 = EDGE_CURVE('',#2874,#9006,#9495,.T.);+#9495 = SURFACE_CURVE('',#9496,(#9500,#9507),.PCURVE_S1.);+#9496 = LINE('',#9497,#9498);+#9497 = CARTESIAN_POINT('',(0.746081715158,-0.178996584672,1.8000001));+#9498 = VECTOR('',#9499,1.);+#9499 = DIRECTION('',(-0.,-0.,-1.));+#9500 = PCURVE('',#2929,#9501);+#9501 = DEFINITIONAL_REPRESENTATION('',(#9502),#9506);+#9502 = LINE('',#9503,#9504);+#9503 = CARTESIAN_POINT('',(1.,0.));+#9504 = VECTOR('',#9505,1.);+#9505 = DIRECTION('',(0.,-1.));+#9506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9507 = PCURVE('',#2893,#9508);+#9508 = DEFINITIONAL_REPRESENTATION('',(#9509),#9513);+#9509 = LINE('',#9510,#9511);+#9510 = CARTESIAN_POINT('',(0.,0.));+#9511 = VECTOR('',#9512,1.);+#9512 = DIRECTION('',(0.,-1.));+#9513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9514 = ADVANCED_FACE('',(#9515),#2893,.T.);+#9515 = FACE_BOUND('',#9516,.T.);+#9516 = EDGE_LOOP('',(#9517,#9518,#9519,#9520));+#9517 = ORIENTED_EDGE('',*,*,#2873,.T.);+#9518 = ORIENTED_EDGE('',*,*,#9494,.T.);+#9519 = ORIENTED_EDGE('',*,*,#9028,.T.);+#9520 = ORIENTED_EDGE('',*,*,#9521,.F.);+#9521 = EDGE_CURVE('',#2838,#9029,#9522,.T.);+#9522 = SURFACE_CURVE('',#9523,(#9527,#9534),.PCURVE_S1.);+#9523 = LINE('',#9524,#9525);+#9524 = CARTESIAN_POINT('',(0.827228934442,-0.151264719441,1.8000001));+#9525 = VECTOR('',#9526,1.);+#9526 = DIRECTION('',(-0.,-0.,-1.));+#9527 = PCURVE('',#2893,#9528);+#9528 = DEFINITIONAL_REPRESENTATION('',(#9529),#9533);+#9529 = LINE('',#9530,#9531);+#9530 = CARTESIAN_POINT('',(1.,0.));+#9531 = VECTOR('',#9532,1.);+#9532 = DIRECTION('',(0.,-1.));+#9533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9534 = PCURVE('',#2857,#9535);+#9535 = DEFINITIONAL_REPRESENTATION('',(#9536),#9540);+#9536 = LINE('',#9537,#9538);+#9537 = CARTESIAN_POINT('',(0.,0.));+#9538 = VECTOR('',#9539,1.);+#9539 = DIRECTION('',(0.,-1.));+#9540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9541 = ADVANCED_FACE('',(#9542),#2857,.T.);+#9542 = FACE_BOUND('',#9543,.T.);+#9543 = EDGE_LOOP('',(#9544,#9545,#9546,#9547));+#9544 = ORIENTED_EDGE('',*,*,#2837,.T.);+#9545 = ORIENTED_EDGE('',*,*,#9521,.T.);+#9546 = ORIENTED_EDGE('',*,*,#9051,.T.);+#9547 = ORIENTED_EDGE('',*,*,#9548,.F.);+#9548 = EDGE_CURVE('',#2793,#9052,#9549,.T.);+#9549 = SURFACE_CURVE('',#9550,(#9554,#9561),.PCURVE_S1.);+#9550 = LINE('',#9551,#9552);+#9551 = CARTESIAN_POINT('',(0.855748636753,-7.248101139869E-02,1.8000001+ ));+#9552 = VECTOR('',#9553,1.);+#9553 = DIRECTION('',(-0.,-0.,-1.));+#9554 = PCURVE('',#2857,#9555);+#9555 = DEFINITIONAL_REPRESENTATION('',(#9556),#9560);+#9556 = LINE('',#9557,#9558);+#9557 = CARTESIAN_POINT('',(1.,0.));+#9558 = VECTOR('',#9559,1.);+#9559 = DIRECTION('',(0.,-1.));+#9560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9561 = PCURVE('',#2818,#9562);+#9562 = DEFINITIONAL_REPRESENTATION('',(#9563),#9567);+#9563 = LINE('',#9564,#9565);+#9564 = CARTESIAN_POINT('',(0.,0.));+#9565 = VECTOR('',#9566,1.);+#9566 = DIRECTION('',(0.,-1.));+#9567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9568 = ADVANCED_FACE('',(#9569),#2818,.T.);+#9569 = FACE_BOUND('',#9570,.T.);+#9570 = EDGE_LOOP('',(#9571,#9572,#9573,#9574));+#9571 = ORIENTED_EDGE('',*,*,#2792,.T.);+#9572 = ORIENTED_EDGE('',*,*,#9548,.T.);+#9573 = ORIENTED_EDGE('',*,*,#9074,.T.);+#9574 = ORIENTED_EDGE('',*,*,#9575,.F.);+#9575 = EDGE_CURVE('',#2757,#9075,#9576,.T.);+#9576 = SURFACE_CURVE('',#9577,(#9581,#9588),.PCURVE_S1.);+#9577 = LINE('',#9578,#9579);+#9578 = CARTESIAN_POINT('',(0.826283529945,5.987561811196E-03,1.8000001)+ );+#9579 = VECTOR('',#9580,1.);+#9580 = DIRECTION('',(-0.,-0.,-1.));+#9581 = PCURVE('',#2818,#9582);+#9582 = DEFINITIONAL_REPRESENTATION('',(#9583),#9587);+#9583 = LINE('',#9584,#9585);+#9584 = CARTESIAN_POINT('',(1.,0.));+#9585 = VECTOR('',#9586,1.);+#9586 = DIRECTION('',(0.,-1.));+#9587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9588 = PCURVE('',#2776,#9589);+#9589 = DEFINITIONAL_REPRESENTATION('',(#9590),#9594);+#9590 = LINE('',#9591,#9592);+#9591 = CARTESIAN_POINT('',(0.,0.));+#9592 = VECTOR('',#9593,1.);+#9593 = DIRECTION('',(0.,-1.));+#9594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9595 = ADVANCED_FACE('',(#9596),#2776,.T.);+#9596 = FACE_BOUND('',#9597,.T.);+#9597 = EDGE_LOOP('',(#9598,#9599,#9600,#9601));+#9598 = ORIENTED_EDGE('',*,*,#2756,.T.);+#9599 = ORIENTED_EDGE('',*,*,#9575,.T.);+#9600 = ORIENTED_EDGE('',*,*,#9097,.T.);+#9601 = ORIENTED_EDGE('',*,*,#9602,.F.);+#9602 = EDGE_CURVE('',#2721,#9098,#9603,.T.);+#9603 = SURFACE_CURVE('',#9604,(#9608,#9615),.PCURVE_S1.);+#9604 = LINE('',#9605,#9606);+#9605 = CARTESIAN_POINT('',(0.744190906165,3.403456187417E-02,1.8000001)+ );+#9606 = VECTOR('',#9607,1.);+#9607 = DIRECTION('',(-0.,-0.,-1.));+#9608 = PCURVE('',#2776,#9609);+#9609 = DEFINITIONAL_REPRESENTATION('',(#9610),#9614);+#9610 = LINE('',#9611,#9612);+#9611 = CARTESIAN_POINT('',(1.,0.));+#9612 = VECTOR('',#9613,1.);+#9613 = DIRECTION('',(0.,-1.));+#9614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9615 = PCURVE('',#2740,#9616);+#9616 = DEFINITIONAL_REPRESENTATION('',(#9617),#9621);+#9617 = LINE('',#9618,#9619);+#9618 = CARTESIAN_POINT('',(0.,0.));+#9619 = VECTOR('',#9620,1.);+#9620 = DIRECTION('',(0.,-1.));+#9621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9622 = ADVANCED_FACE('',(#9623),#2740,.T.);+#9623 = FACE_BOUND('',#9624,.T.);+#9624 = EDGE_LOOP('',(#9625,#9626,#9627,#9628));+#9625 = ORIENTED_EDGE('',*,*,#2720,.T.);+#9626 = ORIENTED_EDGE('',*,*,#9602,.T.);+#9627 = ORIENTED_EDGE('',*,*,#9120,.T.);+#9628 = ORIENTED_EDGE('',*,*,#9629,.F.);+#9629 = EDGE_CURVE('',#2685,#9121,#9630,.T.);+#9630 = SURFACE_CURVE('',#9631,(#9635,#9642),.PCURVE_S1.);+#9631 = LINE('',#9632,#9633);+#9632 = CARTESIAN_POINT('',(0.694399602683,2.820456747906E-02,1.8000001)+ );+#9633 = VECTOR('',#9634,1.);+#9634 = DIRECTION('',(-0.,-0.,-1.));+#9635 = PCURVE('',#2740,#9636);+#9636 = DEFINITIONAL_REPRESENTATION('',(#9637),#9641);+#9637 = LINE('',#9638,#9639);+#9638 = CARTESIAN_POINT('',(1.,0.));+#9639 = VECTOR('',#9640,1.);+#9640 = DIRECTION('',(0.,-1.));+#9641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9642 = PCURVE('',#2704,#9643);+#9643 = DEFINITIONAL_REPRESENTATION('',(#9644),#9648);+#9644 = LINE('',#9645,#9646);+#9645 = CARTESIAN_POINT('',(0.,0.));+#9646 = VECTOR('',#9647,1.);+#9647 = DIRECTION('',(0.,-1.));+#9648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9649 = ADVANCED_FACE('',(#9650),#2704,.T.);+#9650 = FACE_BOUND('',#9651,.T.);+#9651 = EDGE_LOOP('',(#9652,#9653,#9654,#9655));+#9652 = ORIENTED_EDGE('',*,*,#2684,.T.);+#9653 = ORIENTED_EDGE('',*,*,#9629,.T.);+#9654 = ORIENTED_EDGE('',*,*,#9143,.T.);+#9655 = ORIENTED_EDGE('',*,*,#9656,.F.);+#9656 = EDGE_CURVE('',#2658,#8683,#9657,.T.);+#9657 = SURFACE_CURVE('',#9658,(#9662,#9669),.PCURVE_S1.);+#9658 = LINE('',#9659,#9660);+#9659 = CARTESIAN_POINT('',(0.648074782354,1.071458429372E-02,1.8000001)+ );+#9660 = VECTOR('',#9661,1.);+#9661 = DIRECTION('',(-0.,-0.,-1.));+#9662 = PCURVE('',#2704,#9663);+#9663 = DEFINITIONAL_REPRESENTATION('',(#9664),#9668);+#9664 = LINE('',#9665,#9666);+#9665 = CARTESIAN_POINT('',(1.,0.));+#9666 = VECTOR('',#9667,1.);+#9667 = DIRECTION('',(0.,-1.));+#9668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9669 = PCURVE('',#2673,#9670);+#9670 = DEFINITIONAL_REPRESENTATION('',(#9671),#9675);+#9671 = LINE('',#9672,#9673);+#9672 = CARTESIAN_POINT('',(0.,0.));+#9673 = VECTOR('',#9674,1.);+#9674 = DIRECTION('',(0.,-1.));+#9675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9676 = ADVANCED_FACE('',(#9677),#2673,.T.);+#9677 = FACE_BOUND('',#9678,.T.);+#9678 = EDGE_LOOP('',(#9679,#9680,#9681,#9682));+#9679 = ORIENTED_EDGE('',*,*,#2657,.T.);+#9680 = ORIENTED_EDGE('',*,*,#9656,.T.);+#9681 = ORIENTED_EDGE('',*,*,#8682,.T.);+#9682 = ORIENTED_EDGE('',*,*,#9683,.F.);+#9683 = EDGE_CURVE('',#2631,#8685,#9684,.T.);+#9684 = SURFACE_CURVE('',#9685,(#9689,#9696),.PCURVE_S1.);+#9685 = LINE('',#9686,#9687);+#9686 = CARTESIAN_POINT('',(0.648074782354,0.24706570842,1.8000001));+#9687 = VECTOR('',#9688,1.);+#9688 = DIRECTION('',(-0.,-0.,-1.));+#9689 = PCURVE('',#2673,#9690);+#9690 = DEFINITIONAL_REPRESENTATION('',(#9691),#9695);+#9691 = LINE('',#9692,#9693);+#9692 = CARTESIAN_POINT('',(0.236351124126,0.));+#9693 = VECTOR('',#9694,1.);+#9694 = DIRECTION('',(0.,-1.));+#9695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9696 = PCURVE('',#2646,#9697);+#9697 = DEFINITIONAL_REPRESENTATION('',(#9698),#9702);+#9698 = LINE('',#9699,#9700);+#9699 = CARTESIAN_POINT('',(0.,0.));+#9700 = VECTOR('',#9701,1.);+#9701 = DIRECTION('',(0.,-1.));+#9702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9703 = ADVANCED_FACE('',(#9704),#2646,.T.);+#9704 = FACE_BOUND('',#9705,.T.);+#9705 = EDGE_LOOP('',(#9706,#9707,#9708,#9709));+#9706 = ORIENTED_EDGE('',*,*,#2628,.T.);+#9707 = ORIENTED_EDGE('',*,*,#9683,.T.);+#9708 = ORIENTED_EDGE('',*,*,#8707,.T.);+#9709 = ORIENTED_EDGE('',*,*,#8607,.F.);+#9710 = ADVANCED_FACE('',(#9711),#2359,.F.);+#9711 = FACE_BOUND('',#9712,.F.);+#9712 = EDGE_LOOP('',(#9713,#9714,#9734,#9735));+#9713 = ORIENTED_EDGE('',*,*,#2343,.T.);+#9714 = ORIENTED_EDGE('',*,*,#9715,.T.);+#9715 = EDGE_CURVE('',#2316,#2541,#9716,.T.);+#9716 = SURFACE_CURVE('',#9717,(#9720,#9727),.PCURVE_S1.);+#9717 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9718,#9719),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9718 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#9719 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#9720 = PCURVE('',#2359,#9721);+#9721 = DEFINITIONAL_REPRESENTATION('',(#9722),#9726);+#9722 = LINE('',#9723,#9724);+#9723 = CARTESIAN_POINT('',(3.475,-6.900828963579E-17));+#9724 = VECTOR('',#9725,1.);+#9725 = DIRECTION('',(0.,1.));+#9726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9727 = PCURVE('',#2331,#9728);+#9728 = DEFINITIONAL_REPRESENTATION('',(#9729),#9733);+#9729 = LINE('',#9730,#9731);+#9730 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#9731 = VECTOR('',#9732,1.);+#9732 = DIRECTION('',(4.627785088841E-16,1.));+#9733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9734 = ORIENTED_EDGE('',*,*,#2540,.F.);+#9735 = ORIENTED_EDGE('',*,*,#2401,.F.);+#9736 = ADVANCED_FACE('',(#9737),#2331,.F.);+#9737 = FACE_BOUND('',#9738,.F.);+#9738 = EDGE_LOOP('',(#9739,#9740,#9760,#9761));+#9739 = ORIENTED_EDGE('',*,*,#2315,.T.);+#9740 = ORIENTED_EDGE('',*,*,#9741,.T.);+#9741 = EDGE_CURVE('',#2288,#2563,#9742,.T.);+#9742 = SURFACE_CURVE('',#9743,(#9746,#9753),.PCURVE_S1.);+#9743 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9744,#9745),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9744 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#9745 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#9746 = PCURVE('',#2331,#9747);+#9747 = DEFINITIONAL_REPRESENTATION('',(#9748),#9752);+#9748 = LINE('',#9749,#9750);+#9749 = CARTESIAN_POINT('',(0.194454364826,-2.270112686593E-17));+#9750 = VECTOR('',#9751,1.);+#9751 = DIRECTION('',(0.,1.));+#9752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9753 = PCURVE('',#2303,#9754);+#9754 = DEFINITIONAL_REPRESENTATION('',(#9755),#9759);+#9755 = LINE('',#9756,#9757);+#9756 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#9757 = VECTOR('',#9758,1.);+#9758 = DIRECTION('',(-3.887832855435E-17,1.));+#9759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9760 = ORIENTED_EDGE('',*,*,#2562,.F.);+#9761 = ORIENTED_EDGE('',*,*,#9715,.F.);+#9762 = ADVANCED_FACE('',(#9763),#2303,.F.);+#9763 = FACE_BOUND('',#9764,.F.);+#9764 = EDGE_LOOP('',(#9765,#9766,#9786,#9787));+#9765 = ORIENTED_EDGE('',*,*,#2287,.T.);+#9766 = ORIENTED_EDGE('',*,*,#9767,.T.);+#9767 = EDGE_CURVE('',#2260,#2585,#9768,.T.);+#9768 = SURFACE_CURVE('',#9769,(#9772,#9779),.PCURVE_S1.);+#9769 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9770,#9771),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9770 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#9771 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#9772 = PCURVE('',#2303,#9773);+#9773 = DEFINITIONAL_REPRESENTATION('',(#9774),#9778);+#9774 = LINE('',#9775,#9776);+#9775 = CARTESIAN_POINT('',(4.475,-2.841128830464E-17));+#9776 = VECTOR('',#9777,1.);+#9777 = DIRECTION('',(0.,1.));+#9778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9779 = PCURVE('',#2275,#9780);+#9780 = DEFINITIONAL_REPRESENTATION('',(#9781),#9785);+#9781 = LINE('',#9782,#9783);+#9782 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#9783 = VECTOR('',#9784,1.);+#9784 = DIRECTION('',(3.933483957273E-16,1.));+#9785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9786 = ORIENTED_EDGE('',*,*,#2584,.F.);+#9787 = ORIENTED_EDGE('',*,*,#9741,.F.);+#9788 = ADVANCED_FACE('',(#9789),#2275,.F.);+#9789 = FACE_BOUND('',#9790,.F.);+#9790 = EDGE_LOOP('',(#9791,#9792,#9812,#9813));+#9791 = ORIENTED_EDGE('',*,*,#2259,.T.);+#9792 = ORIENTED_EDGE('',*,*,#9793,.T.);+#9793 = EDGE_CURVE('',#2232,#2474,#9794,.T.);+#9794 = SURFACE_CURVE('',#9795,(#9798,#9805),.PCURVE_S1.);+#9795 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9796,#9797),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9796 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#9797 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#9798 = PCURVE('',#2275,#9799);+#9799 = DEFINITIONAL_REPRESENTATION('',(#9800),#9804);+#9800 = LINE('',#9801,#9802);+#9801 = CARTESIAN_POINT('',(0.194454364826,8.346321558809E-17));+#9802 = VECTOR('',#9803,1.);+#9803 = DIRECTION('',(-8.326672684689E-17,1.));+#9804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9805 = PCURVE('',#2247,#9806);+#9806 = DEFINITIONAL_REPRESENTATION('',(#9807),#9811);+#9807 = LINE('',#9808,#9809);+#9808 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#9809 = VECTOR('',#9810,1.);+#9810 = DIRECTION('',(2.060577736657E-16,1.));+#9811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9812 = ORIENTED_EDGE('',*,*,#2606,.F.);+#9813 = ORIENTED_EDGE('',*,*,#9767,.F.);+#9814 = ADVANCED_FACE('',(#9815),#2247,.F.);+#9815 = FACE_BOUND('',#9816,.F.);+#9816 = EDGE_LOOP('',(#9817,#9818,#9838,#9839));+#9817 = ORIENTED_EDGE('',*,*,#2231,.T.);+#9818 = ORIENTED_EDGE('',*,*,#9819,.T.);+#9819 = EDGE_CURVE('',#2204,#2476,#9820,.T.);+#9820 = SURFACE_CURVE('',#9821,(#9824,#9831),.PCURVE_S1.);+#9821 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9822,#9823),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9822 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#9823 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#9824 = PCURVE('',#2247,#9825);+#9825 = DEFINITIONAL_REPRESENTATION('',(#9826),#9830);+#9826 = LINE('',#9827,#9828);+#9827 = CARTESIAN_POINT('',(3.475,-6.900828963579E-17));+#9828 = VECTOR('',#9829,1.);+#9829 = DIRECTION('',(0.,1.));+#9830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9831 = PCURVE('',#2219,#9832);+#9832 = DEFINITIONAL_REPRESENTATION('',(#9833),#9837);+#9833 = LINE('',#9834,#9835);+#9834 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#9835 = VECTOR('',#9836,1.);+#9836 = DIRECTION('',(4.627785088841E-16,1.));+#9837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9838 = ORIENTED_EDGE('',*,*,#2473,.F.);+#9839 = ORIENTED_EDGE('',*,*,#9793,.F.);+#9840 = ADVANCED_FACE('',(#9841),#2219,.F.);+#9841 = FACE_BOUND('',#9842,.F.);+#9842 = EDGE_LOOP('',(#9843,#9844,#9864,#9865));+#9843 = ORIENTED_EDGE('',*,*,#2203,.T.);+#9844 = ORIENTED_EDGE('',*,*,#9845,.T.);+#9845 = EDGE_CURVE('',#2174,#2498,#9846,.T.);+#9846 = SURFACE_CURVE('',#9847,(#9850,#9857),.PCURVE_S1.);+#9847 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9848,#9849),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9848 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#9849 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#9850 = PCURVE('',#2219,#9851);+#9851 = DEFINITIONAL_REPRESENTATION('',(#9852),#9856);+#9852 = LINE('',#9853,#9854);+#9853 = CARTESIAN_POINT('',(0.194454364826,-2.270112686593E-17));+#9854 = VECTOR('',#9855,1.);+#9855 = DIRECTION('',(0.,1.));+#9856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9857 = PCURVE('',#2191,#9858);+#9858 = DEFINITIONAL_REPRESENTATION('',(#9859),#9863);+#9859 = LINE('',#9860,#9861);+#9860 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#9861 = VECTOR('',#9862,1.);+#9862 = DIRECTION('',(-3.887832855435E-17,1.));+#9863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9864 = ORIENTED_EDGE('',*,*,#2497,.F.);+#9865 = ORIENTED_EDGE('',*,*,#9819,.F.);+#9866 = ADVANCED_FACE('',(#9867),#2191,.F.);+#9867 = FACE_BOUND('',#9868,.F.);+#9868 = EDGE_LOOP('',(#9869,#9870,#9871,#9872));+#9869 = ORIENTED_EDGE('',*,*,#2173,.T.);+#9870 = ORIENTED_EDGE('',*,*,#2450,.T.);+#9871 = ORIENTED_EDGE('',*,*,#2519,.F.);+#9872 = ORIENTED_EDGE('',*,*,#9845,.F.);+#9873 = ADVANCED_FACE('',(#9874),#2138,.T.);+#9874 = FACE_BOUND('',#9875,.T.);+#9875 = EDGE_LOOP('',(#9876,#9897,#9920,#9953,#9981,#10010,#10038,#10066+ ,#10094,#10127,#10155,#10177));+#9876 = ORIENTED_EDGE('',*,*,#9877,.F.);+#9877 = EDGE_CURVE('',#263,#2123,#9878,.T.);+#9878 = SURFACE_CURVE('',#9879,(#9883,#9890),.PCURVE_S1.);+#9879 = LINE('',#9880,#9881);+#9880 = CARTESIAN_POINT('',(-1.95,2.11,0.786976568901));+#9881 = VECTOR('',#9882,1.);+#9882 = DIRECTION('',(0.,0.,1.));+#9883 = PCURVE('',#2138,#9884);+#9884 = DEFINITIONAL_REPRESENTATION('',(#9885),#9889);+#9885 = LINE('',#9886,#9887);+#9886 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#9887 = VECTOR('',#9888,1.);+#9888 = DIRECTION('',(1.,0.));+#9889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9890 = PCURVE('',#278,#9891);+#9891 = DEFINITIONAL_REPRESENTATION('',(#9892),#9896);+#9892 = LINE('',#9893,#9894);+#9893 = CARTESIAN_POINT('',(4.385,-0.238023431099));+#9894 = VECTOR('',#9895,1.);+#9895 = DIRECTION('',(0.,1.));+#9896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9897 = ORIENTED_EDGE('',*,*,#9898,.T.);+#9898 = EDGE_CURVE('',#263,#9899,#9901,.T.);+#9899 = VERTEX_POINT('',#9900);+#9900 = CARTESIAN_POINT('',(-2.25,2.11,0.825));+#9901 = SURFACE_CURVE('',#9902,(#9906,#9913),.PCURVE_S1.);+#9902 = LINE('',#9903,#9904);+#9903 = CARTESIAN_POINT('',(-1.8,2.11,0.825));+#9904 = VECTOR('',#9905,1.);+#9905 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#9906 = PCURVE('',#2138,#9907);+#9907 = DEFINITIONAL_REPRESENTATION('',(#9908),#9912);+#9908 = LINE('',#9909,#9910);+#9909 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#9910 = VECTOR('',#9911,1.);+#9911 = DIRECTION('',(0.,-1.));+#9912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9913 = PCURVE('',#306,#9914);+#9914 = DEFINITIONAL_REPRESENTATION('',(#9915),#9919);+#9915 = LINE('',#9916,#9917);+#9916 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#9917 = VECTOR('',#9918,1.);+#9918 = DIRECTION('',(1.,0.));+#9919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9920 = ORIENTED_EDGE('',*,*,#9921,.T.);+#9921 = EDGE_CURVE('',#9899,#9922,#9924,.T.);+#9922 = VERTEX_POINT('',#9923);+#9923 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.742364817767));+#9924 = SURFACE_CURVE('',#9925,(#9930,#9941),.PCURVE_S1.);+#9925 = CIRCLE('',#9926,0.1);+#9926 = AXIS2_PLACEMENT_3D('',#9927,#9928,#9929);+#9927 = CARTESIAN_POINT('',(-2.25,2.11,0.725));+#9928 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#9929 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#9930 = PCURVE('',#2138,#9931);+#9931 = DEFINITIONAL_REPRESENTATION('',(#9932),#9940);+#9932 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9933,#9934,#9935,#9936,+#9937,#9938,#9939),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9933 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#9934 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#9935 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#9936 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#9937 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#9938 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#9939 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#9940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9941 = PCURVE('',#9942,#9947);+#9942 = CYLINDRICAL_SURFACE('',#9943,0.1);+#9943 = AXIS2_PLACEMENT_3D('',#9944,#9945,#9946);+#9944 = CARTESIAN_POINT('',(-2.25,1.7,0.725));+#9945 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#9946 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#9947 = DEFINITIONAL_REPRESENTATION('',(#9948),#9952);+#9948 = LINE('',#9949,#9950);+#9949 = CARTESIAN_POINT('',(0.,-0.41));+#9950 = VECTOR('',#9951,1.);+#9951 = DIRECTION('',(1.,0.));+#9952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9953 = ORIENTED_EDGE('',*,*,#9954,.T.);+#9954 = EDGE_CURVE('',#9922,#9955,#9957,.T.);+#9955 = VERTEX_POINT('',#9956);+#9956 = CARTESIAN_POINT('',(-2.429496640897,2.11,0.2479055467));+#9957 = SURFACE_CURVE('',#9958,(#9962,#9969),.PCURVE_S1.);+#9958 = LINE('',#9959,#9960);+#9959 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.742364817767));+#9960 = VECTOR('',#9961,1.);+#9961 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087)+ );+#9962 = PCURVE('',#2138,#9963);+#9963 = DEFINITIONAL_REPRESENTATION('',(#9964),#9968);+#9964 = LINE('',#9965,#9966);+#9965 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#9966 = VECTOR('',#9967,1.);+#9967 = DIRECTION('',(-0.986841372087,-0.161691392282));+#9968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9969 = PCURVE('',#9970,#9975);+#9970 = PLANE('',#9971);+#9971 = AXIS2_PLACEMENT_3D('',#9972,#9973,#9974);+#9972 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767));+#9973 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282)+ );+#9974 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087)+ );+#9975 = DEFINITIONAL_REPRESENTATION('',(#9976),#9980);+#9976 = LINE('',#9977,#9978);+#9977 = CARTESIAN_POINT('',(7.585549159209E-19,-0.41));+#9978 = VECTOR('',#9979,1.);+#9979 = DIRECTION('',(1.,5.984962792299E-34));+#9980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9981 = ORIENTED_EDGE('',*,*,#9982,.T.);+#9982 = EDGE_CURVE('',#9955,#9983,#9985,.T.);+#9983 = VERTEX_POINT('',#9984);+#9984 = CARTESIAN_POINT('',(-2.724938966801,2.11,-1.665334536938E-16));+#9985 = SURFACE_CURVE('',#9986,(#9991,#9998),.PCURVE_S1.);+#9986 = CIRCLE('',#9987,0.3);+#9987 = AXIS2_PLACEMENT_3D('',#9988,#9989,#9990);+#9988 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.3));+#9989 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#9990 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#9991 = PCURVE('',#2138,#9992);+#9992 = DEFINITIONAL_REPRESENTATION('',(#9993),#9997);+#9993 = CIRCLE('',#9994,0.3);+#9994 = AXIS2_PLACEMENT_2D('',#9995,#9996);+#9995 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#9996 = DIRECTION('',(-0.173648177667,0.984807753012));+#9997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9998 = PCURVE('',#9999,#10004);+#9999 = CYLINDRICAL_SURFACE('',#10000,0.3);+#10000 = AXIS2_PLACEMENT_3D('',#10001,#10002,#10003);+#10001 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3));+#10002 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#10003 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#10004 = DEFINITIONAL_REPRESENTATION('',(#10005),#10009);+#10005 = LINE('',#10006,#10007);+#10006 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#10007 = VECTOR('',#10008,1.);+#10008 = DIRECTION('',(-1.,0.));+#10009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10010 = ORIENTED_EDGE('',*,*,#10011,.T.);+#10011 = EDGE_CURVE('',#9983,#10012,#10014,.T.);+#10012 = VERTEX_POINT('',#10013);+#10013 = CARTESIAN_POINT('',(-3.,2.11,-1.665334536938E-16));+#10014 = SURFACE_CURVE('',#10015,(#10019,#10026),.PCURVE_S1.);+#10015 = LINE('',#10016,#10017);+#10016 = CARTESIAN_POINT('',(-2.724938966801,2.11,-1.665334536938E-16));+#10017 = VECTOR('',#10018,1.);+#10018 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#10019 = PCURVE('',#2138,#10020);+#10020 = DEFINITIONAL_REPRESENTATION('',(#10021),#10025);+#10021 = LINE('',#10022,#10023);+#10022 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#10023 = VECTOR('',#10024,1.);+#10024 = DIRECTION('',(0.,-1.));+#10025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10026 = PCURVE('',#10027,#10032);+#10027 = PLANE('',#10028);+#10028 = AXIS2_PLACEMENT_3D('',#10029,#10030,#10031);+#10029 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16));+#10030 = DIRECTION('',(0.,0.,1.));+#10031 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#10032 = DEFINITIONAL_REPRESENTATION('',(#10033),#10037);+#10033 = LINE('',#10034,#10035);+#10034 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#10035 = VECTOR('',#10036,1.);+#10036 = DIRECTION('',(1.,0.));+#10037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10038 = ORIENTED_EDGE('',*,*,#10039,.T.);+#10039 = EDGE_CURVE('',#10012,#10040,#10042,.T.);+#10040 = VERTEX_POINT('',#10041);+#10041 = CARTESIAN_POINT('',(-3.,2.11,0.2));+#10042 = SURFACE_CURVE('',#10043,(#10047,#10054),.PCURVE_S1.);+#10043 = LINE('',#10044,#10045);+#10044 = CARTESIAN_POINT('',(-3.,2.11,-1.665334536938E-16));+#10045 = VECTOR('',#10046,1.);+#10046 = DIRECTION('',(0.,0.,1.));+#10047 = PCURVE('',#2138,#10048);+#10048 = DEFINITIONAL_REPRESENTATION('',(#10049),#10053);+#10049 = LINE('',#10050,#10051);+#10050 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#10051 = VECTOR('',#10052,1.);+#10052 = DIRECTION('',(1.,0.));+#10053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10054 = PCURVE('',#10055,#10060);+#10055 = PLANE('',#10056);+#10056 = AXIS2_PLACEMENT_3D('',#10057,#10058,#10059);+#10057 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16));+#10058 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#10059 = DIRECTION('',(0.,0.,1.));+#10060 = DEFINITIONAL_REPRESENTATION('',(#10061),#10065);+#10061 = LINE('',#10062,#10063);+#10062 = CARTESIAN_POINT('',(0.,-0.41));+#10063 = VECTOR('',#10064,1.);+#10064 = DIRECTION('',(1.,0.));+#10065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10066 = ORIENTED_EDGE('',*,*,#10067,.T.);+#10067 = EDGE_CURVE('',#10040,#10068,#10070,.T.);+#10068 = VERTEX_POINT('',#10069);+#10069 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.2));+#10070 = SURFACE_CURVE('',#10071,(#10075,#10082),.PCURVE_S1.);+#10071 = LINE('',#10072,#10073);+#10072 = CARTESIAN_POINT('',(-3.,2.11,0.2));+#10073 = VECTOR('',#10074,1.);+#10074 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#10075 = PCURVE('',#2138,#10076);+#10076 = DEFINITIONAL_REPRESENTATION('',(#10077),#10081);+#10077 = LINE('',#10078,#10079);+#10078 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#10079 = VECTOR('',#10080,1.);+#10080 = DIRECTION('',(0.,1.));+#10081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10082 = PCURVE('',#10083,#10088);+#10083 = PLANE('',#10084);+#10084 = AXIS2_PLACEMENT_3D('',#10085,#10086,#10087);+#10085 = CARTESIAN_POINT('',(-3.,1.7,0.2));+#10086 = DIRECTION('',(0.,0.,-1.));+#10087 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#10088 = DEFINITIONAL_REPRESENTATION('',(#10089),#10093);+#10089 = LINE('',#10090,#10091);+#10090 = CARTESIAN_POINT('',(-4.69137475541E-18,-0.41));+#10091 = VECTOR('',#10092,1.);+#10092 = DIRECTION('',(1.,0.));+#10093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10094 = ORIENTED_EDGE('',*,*,#10095,.T.);+#10095 = EDGE_CURVE('',#10068,#10096,#10098,.T.);+#10096 = VERTEX_POINT('',#10097);+#10097 = CARTESIAN_POINT('',(-2.6264581915,2.11,0.282635182233));+#10098 = SURFACE_CURVE('',#10099,(#10104,#10115),.PCURVE_S1.);+#10099 = CIRCLE('',#10100,0.1);+#10100 = AXIS2_PLACEMENT_3D('',#10101,#10102,#10103);+#10101 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.3));+#10102 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#10103 = DIRECTION('',(0.,0.,-1.));+#10104 = PCURVE('',#2138,#10105);+#10105 = DEFINITIONAL_REPRESENTATION('',(#10106),#10114);+#10106 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10107,#10108,#10109,#10110+ ,#10111,#10112,#10113),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10107 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#10108 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#10109 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#10110 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#10111 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#10112 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#10113 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#10114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10115 = PCURVE('',#10116,#10121);+#10116 = CYLINDRICAL_SURFACE('',#10117,0.1);+#10117 = AXIS2_PLACEMENT_3D('',#10118,#10119,#10120);+#10118 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3));+#10119 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#10120 = DIRECTION('',(-0.,0.,-1.));+#10121 = DEFINITIONAL_REPRESENTATION('',(#10122),#10126);+#10122 = LINE('',#10123,#10124);+#10123 = CARTESIAN_POINT('',(0.,-0.41));+#10124 = VECTOR('',#10125,1.);+#10125 = DIRECTION('',(1.,0.));+#10126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10127 = ORIENTED_EDGE('',*,*,#10128,.T.);+#10128 = EDGE_CURVE('',#10096,#10129,#10131,.T.);+#10129 = VERTEX_POINT('',#10130);+#10130 = CARTESIAN_POINT('',(-2.545442325904,2.11,0.7770944533));+#10131 = SURFACE_CURVE('',#10132,(#10136,#10143),.PCURVE_S1.);+#10132 = LINE('',#10133,#10134);+#10133 = CARTESIAN_POINT('',(-2.6264581915,2.11,0.282635182233));+#10134 = VECTOR('',#10135,1.);+#10135 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#10136 = PCURVE('',#2138,#10137);+#10137 = DEFINITIONAL_REPRESENTATION('',(#10138),#10142);+#10138 = LINE('',#10139,#10140);+#10139 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#10140 = VECTOR('',#10141,1.);+#10141 = DIRECTION('',(0.986841372087,0.161691392282));+#10142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10143 = PCURVE('',#10144,#10149);+#10144 = PLANE('',#10145);+#10145 = AXIS2_PLACEMENT_3D('',#10146,#10147,#10148);+#10146 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233));+#10147 = DIRECTION('',(0.986841372087,-1.129181146488E-17,+ -0.161691392282));+#10148 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#10149 = DEFINITIONAL_REPRESENTATION('',(#10150),#10154);+#10150 = LINE('',#10151,#10152);+#10151 = CARTESIAN_POINT('',(-7.585549159209E-19,-0.41));+#10152 = VECTOR('',#10153,1.);+#10153 = DIRECTION('',(1.,-5.984962792299E-34));+#10154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10155 = ORIENTED_EDGE('',*,*,#10156,.T.);+#10156 = EDGE_CURVE('',#10129,#2095,#10157,.T.);+#10157 = SURFACE_CURVE('',#10158,(#10163,#10170),.PCURVE_S1.);+#10158 = CIRCLE('',#10159,0.3);+#10159 = AXIS2_PLACEMENT_3D('',#10160,#10161,#10162);+#10160 = CARTESIAN_POINT('',(-2.25,2.11,0.725));+#10161 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#10162 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#10163 = PCURVE('',#2138,#10164);+#10164 = DEFINITIONAL_REPRESENTATION('',(#10165),#10169);+#10165 = CIRCLE('',#10166,0.3);+#10166 = AXIS2_PLACEMENT_2D('',#10167,#10168);+#10167 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#10168 = DIRECTION('',(0.173648177667,-0.984807753012));+#10169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10170 = PCURVE('',#2110,#10171);+#10171 = DEFINITIONAL_REPRESENTATION('',(#10172),#10176);+#10172 = LINE('',#10173,#10174);+#10173 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#10174 = VECTOR('',#10175,1.);+#10175 = DIRECTION('',(-1.,0.));+#10176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10177 = ORIENTED_EDGE('',*,*,#2122,.T.);+#10178 = ADVANCED_FACE('',(#10179),#10144,.F.);+#10179 = FACE_BOUND('',#10180,.F.);+#10180 = EDGE_LOOP('',(#10181,#10204,#10205,#10228));+#10181 = ORIENTED_EDGE('',*,*,#10182,.T.);+#10182 = EDGE_CURVE('',#10183,#10096,#10185,.T.);+#10183 = VERTEX_POINT('',#10184);+#10184 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233));+#10185 = SURFACE_CURVE('',#10186,(#10190,#10197),.PCURVE_S1.);+#10186 = LINE('',#10187,#10188);+#10187 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233));+#10188 = VECTOR('',#10189,1.);+#10189 = DIRECTION('',(1.144237745222E-17,1.,0.));+#10190 = PCURVE('',#10144,#10191);+#10191 = DEFINITIONAL_REPRESENTATION('',(#10192),#10196);+#10192 = LINE('',#10193,#10194);+#10193 = CARTESIAN_POINT('',(0.,-0.));+#10194 = VECTOR('',#10195,1.);+#10195 = DIRECTION('',(-5.385465771581E-30,-1.));+#10196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10197 = PCURVE('',#10116,#10198);+#10198 = DEFINITIONAL_REPRESENTATION('',(#10199),#10203);+#10199 = LINE('',#10200,#10201);+#10200 = CARTESIAN_POINT('',(1.396263401592,0.));+#10201 = VECTOR('',#10202,1.);+#10202 = DIRECTION('',(0.,-1.));+#10203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10204 = ORIENTED_EDGE('',*,*,#10128,.T.);+#10205 = ORIENTED_EDGE('',*,*,#10206,.F.);+#10206 = EDGE_CURVE('',#10207,#10129,#10209,.T.);+#10207 = VERTEX_POINT('',#10208);+#10208 = CARTESIAN_POINT('',(-2.545442325904,1.7,0.7770944533));+#10209 = SURFACE_CURVE('',#10210,(#10214,#10221),.PCURVE_S1.);+#10210 = LINE('',#10211,#10212);+#10211 = CARTESIAN_POINT('',(-2.545442325904,1.7,0.7770944533));+#10212 = VECTOR('',#10213,1.);+#10213 = DIRECTION('',(1.144237745222E-17,1.,0.));+#10214 = PCURVE('',#10144,#10215);+#10215 = DEFINITIONAL_REPRESENTATION('',(#10216),#10220);+#10216 = LINE('',#10217,#10218);+#10217 = CARTESIAN_POINT('',(0.501052433606,-9.270141137704E-19));+#10218 = VECTOR('',#10219,1.);+#10219 = DIRECTION('',(-5.385465771581E-30,-1.));+#10220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10221 = PCURVE('',#2110,#10222);+#10222 = DEFINITIONAL_REPRESENTATION('',(#10223),#10227);+#10223 = LINE('',#10224,#10225);+#10224 = CARTESIAN_POINT('',(6.28318530718,0.));+#10225 = VECTOR('',#10226,1.);+#10226 = DIRECTION('',(0.,-1.));+#10227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10228 = ORIENTED_EDGE('',*,*,#10229,.F.);+#10229 = EDGE_CURVE('',#10183,#10207,#10230,.T.);+#10230 = SURFACE_CURVE('',#10231,(#10235,#10242),.PCURVE_S1.);+#10231 = LINE('',#10232,#10233);+#10232 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233));+#10233 = VECTOR('',#10234,1.);+#10234 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#10235 = PCURVE('',#10144,#10236);+#10236 = DEFINITIONAL_REPRESENTATION('',(#10237),#10241);+#10237 = LINE('',#10238,#10239);+#10238 = CARTESIAN_POINT('',(0.,-0.));+#10239 = VECTOR('',#10240,1.);+#10240 = DIRECTION('',(1.,-5.984962792299E-34));+#10241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10242 = PCURVE('',#2082,#10243);+#10243 = DEFINITIONAL_REPRESENTATION('',(#10244),#10248);+#10244 = LINE('',#10245,#10246);+#10245 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#10246 = VECTOR('',#10247,1.);+#10247 = DIRECTION('',(0.986841372087,0.161691392282));+#10248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10249 = ADVANCED_FACE('',(#10250),#10116,.F.);+#10250 = FACE_BOUND('',#10251,.F.);+#10251 = EDGE_LOOP('',(#10252,#10275,#10276,#10277));+#10252 = ORIENTED_EDGE('',*,*,#10253,.T.);+#10253 = EDGE_CURVE('',#10254,#10068,#10256,.T.);+#10254 = VERTEX_POINT('',#10255);+#10255 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.2));+#10256 = SURFACE_CURVE('',#10257,(#10261,#10268),.PCURVE_S1.);+#10257 = LINE('',#10258,#10259);+#10258 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.2));+#10259 = VECTOR('',#10260,1.);+#10260 = DIRECTION('',(1.144237745222E-17,1.,0.));+#10261 = PCURVE('',#10116,#10262);+#10262 = DEFINITIONAL_REPRESENTATION('',(#10263),#10267);+#10263 = LINE('',#10264,#10265);+#10264 = CARTESIAN_POINT('',(0.,0.));+#10265 = VECTOR('',#10266,1.);+#10266 = DIRECTION('',(0.,-1.));+#10267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10268 = PCURVE('',#10083,#10269);+#10269 = DEFINITIONAL_REPRESENTATION('',(#10270),#10274);+#10270 = LINE('',#10271,#10272);+#10271 = CARTESIAN_POINT('',(0.275061033199,-3.147352164261E-18));+#10272 = VECTOR('',#10273,1.);+#10273 = DIRECTION('',(0.,-1.));+#10274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10275 = ORIENTED_EDGE('',*,*,#10095,.T.);+#10276 = ORIENTED_EDGE('',*,*,#10182,.F.);+#10277 = ORIENTED_EDGE('',*,*,#10278,.F.);+#10278 = EDGE_CURVE('',#10254,#10183,#10279,.T.);+#10279 = SURFACE_CURVE('',#10280,(#10285,#10292),.PCURVE_S1.);+#10280 = CIRCLE('',#10281,0.1);+#10281 = AXIS2_PLACEMENT_3D('',#10282,#10283,#10284);+#10282 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3));+#10283 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#10284 = DIRECTION('',(0.,0.,-1.));+#10285 = PCURVE('',#10116,#10286);+#10286 = DEFINITIONAL_REPRESENTATION('',(#10287),#10291);+#10287 = LINE('',#10288,#10289);+#10288 = CARTESIAN_POINT('',(0.,0.));+#10289 = VECTOR('',#10290,1.);+#10290 = DIRECTION('',(1.,0.));+#10291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10292 = PCURVE('',#2082,#10293);+#10293 = DEFINITIONAL_REPRESENTATION('',(#10294),#10302);+#10294 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10295,#10296,#10297,#10298+ ,#10299,#10300,#10301),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10295 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#10296 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#10297 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#10298 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#10299 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#10300 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#10301 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#10302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10303 = ADVANCED_FACE('',(#10304),#10083,.F.);+#10304 = FACE_BOUND('',#10305,.F.);+#10305 = EDGE_LOOP('',(#10306,#10329,#10330,#10331));+#10306 = ORIENTED_EDGE('',*,*,#10307,.T.);+#10307 = EDGE_CURVE('',#10308,#10040,#10310,.T.);+#10308 = VERTEX_POINT('',#10309);+#10309 = CARTESIAN_POINT('',(-3.,1.7,0.2));+#10310 = SURFACE_CURVE('',#10311,(#10315,#10322),.PCURVE_S1.);+#10311 = LINE('',#10312,#10313);+#10312 = CARTESIAN_POINT('',(-3.,1.7,0.2));+#10313 = VECTOR('',#10314,1.);+#10314 = DIRECTION('',(1.144237745222E-17,1.,0.));+#10315 = PCURVE('',#10083,#10316);+#10316 = DEFINITIONAL_REPRESENTATION('',(#10317),#10321);+#10317 = LINE('',#10318,#10319);+#10318 = CARTESIAN_POINT('',(0.,-0.));+#10319 = VECTOR('',#10320,1.);+#10320 = DIRECTION('',(0.,-1.));+#10321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10322 = PCURVE('',#10055,#10323);+#10323 = DEFINITIONAL_REPRESENTATION('',(#10324),#10328);+#10324 = LINE('',#10325,#10326);+#10325 = CARTESIAN_POINT('',(0.2,0.));+#10326 = VECTOR('',#10327,1.);+#10327 = DIRECTION('',(0.,-1.));+#10328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10329 = ORIENTED_EDGE('',*,*,#10067,.T.);+#10330 = ORIENTED_EDGE('',*,*,#10253,.F.);+#10331 = ORIENTED_EDGE('',*,*,#10332,.F.);+#10332 = EDGE_CURVE('',#10308,#10254,#10333,.T.);+#10333 = SURFACE_CURVE('',#10334,(#10338,#10345),.PCURVE_S1.);+#10334 = LINE('',#10335,#10336);+#10335 = CARTESIAN_POINT('',(-3.,1.7,0.2));+#10336 = VECTOR('',#10337,1.);+#10337 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#10338 = PCURVE('',#10083,#10339);+#10339 = DEFINITIONAL_REPRESENTATION('',(#10340),#10344);+#10340 = LINE('',#10341,#10342);+#10341 = CARTESIAN_POINT('',(0.,-0.));+#10342 = VECTOR('',#10343,1.);+#10343 = DIRECTION('',(1.,0.));+#10344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10345 = PCURVE('',#2082,#10346);+#10346 = DEFINITIONAL_REPRESENTATION('',(#10347),#10351);+#10347 = LINE('',#10348,#10349);+#10348 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#10349 = VECTOR('',#10350,1.);+#10350 = DIRECTION('',(0.,1.));+#10351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10352 = ADVANCED_FACE('',(#10353),#10055,.F.);+#10353 = FACE_BOUND('',#10354,.F.);+#10354 = EDGE_LOOP('',(#10355,#10378,#10379,#10380));+#10355 = ORIENTED_EDGE('',*,*,#10356,.T.);+#10356 = EDGE_CURVE('',#10357,#10012,#10359,.T.);+#10357 = VERTEX_POINT('',#10358);+#10358 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16));+#10359 = SURFACE_CURVE('',#10360,(#10364,#10371),.PCURVE_S1.);+#10360 = LINE('',#10361,#10362);+#10361 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16));+#10362 = VECTOR('',#10363,1.);+#10363 = DIRECTION('',(1.144237745222E-17,1.,0.));+#10364 = PCURVE('',#10055,#10365);+#10365 = DEFINITIONAL_REPRESENTATION('',(#10366),#10370);+#10366 = LINE('',#10367,#10368);+#10367 = CARTESIAN_POINT('',(0.,0.));+#10368 = VECTOR('',#10369,1.);+#10369 = DIRECTION('',(0.,-1.));+#10370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10371 = PCURVE('',#10027,#10372);+#10372 = DEFINITIONAL_REPRESENTATION('',(#10373),#10377);+#10373 = LINE('',#10374,#10375);+#10374 = CARTESIAN_POINT('',(0.275061033199,3.147352164261E-18));+#10375 = VECTOR('',#10376,1.);+#10376 = DIRECTION('',(0.,-1.));+#10377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10378 = ORIENTED_EDGE('',*,*,#10039,.T.);+#10379 = ORIENTED_EDGE('',*,*,#10307,.F.);+#10380 = ORIENTED_EDGE('',*,*,#10381,.F.);+#10381 = EDGE_CURVE('',#10357,#10308,#10382,.T.);+#10382 = SURFACE_CURVE('',#10383,(#10387,#10394),.PCURVE_S1.);+#10383 = LINE('',#10384,#10385);+#10384 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16));+#10385 = VECTOR('',#10386,1.);+#10386 = DIRECTION('',(0.,0.,1.));+#10387 = PCURVE('',#10055,#10388);+#10388 = DEFINITIONAL_REPRESENTATION('',(#10389),#10393);+#10389 = LINE('',#10390,#10391);+#10390 = CARTESIAN_POINT('',(0.,0.));+#10391 = VECTOR('',#10392,1.);+#10392 = DIRECTION('',(1.,0.));+#10393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10394 = PCURVE('',#2082,#10395);+#10395 = DEFINITIONAL_REPRESENTATION('',(#10396),#10400);+#10396 = LINE('',#10397,#10398);+#10397 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#10398 = VECTOR('',#10399,1.);+#10399 = DIRECTION('',(1.,0.));+#10400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10401 = ADVANCED_FACE('',(#10402),#10027,.F.);+#10402 = FACE_BOUND('',#10403,.F.);+#10403 = EDGE_LOOP('',(#10404,#10427,#10428,#10429));+#10404 = ORIENTED_EDGE('',*,*,#10405,.T.);+#10405 = EDGE_CURVE('',#10406,#9983,#10408,.T.);+#10406 = VERTEX_POINT('',#10407);+#10407 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16));+#10408 = SURFACE_CURVE('',#10409,(#10413,#10420),.PCURVE_S1.);+#10409 = LINE('',#10410,#10411);+#10410 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16));+#10411 = VECTOR('',#10412,1.);+#10412 = DIRECTION('',(1.144237745222E-17,1.,0.));+#10413 = PCURVE('',#10027,#10414);+#10414 = DEFINITIONAL_REPRESENTATION('',(#10415),#10419);+#10415 = LINE('',#10416,#10417);+#10416 = CARTESIAN_POINT('',(0.,0.));+#10417 = VECTOR('',#10418,1.);+#10418 = DIRECTION('',(0.,-1.));+#10419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10420 = PCURVE('',#9999,#10421);+#10421 = DEFINITIONAL_REPRESENTATION('',(#10422),#10426);+#10422 = LINE('',#10423,#10424);+#10423 = CARTESIAN_POINT('',(4.886921905584,0.));+#10424 = VECTOR('',#10425,1.);+#10425 = DIRECTION('',(0.,-1.));+#10426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10427 = ORIENTED_EDGE('',*,*,#10011,.T.);+#10428 = ORIENTED_EDGE('',*,*,#10356,.F.);+#10429 = ORIENTED_EDGE('',*,*,#10430,.F.);+#10430 = EDGE_CURVE('',#10406,#10357,#10431,.T.);+#10431 = SURFACE_CURVE('',#10432,(#10436,#10443),.PCURVE_S1.);+#10432 = LINE('',#10433,#10434);+#10433 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16));+#10434 = VECTOR('',#10435,1.);+#10435 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#10436 = PCURVE('',#10027,#10437);+#10437 = DEFINITIONAL_REPRESENTATION('',(#10438),#10442);+#10438 = LINE('',#10439,#10440);+#10439 = CARTESIAN_POINT('',(0.,0.));+#10440 = VECTOR('',#10441,1.);+#10441 = DIRECTION('',(1.,0.));+#10442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10443 = PCURVE('',#2082,#10444);+#10444 = DEFINITIONAL_REPRESENTATION('',(#10445),#10449);+#10445 = LINE('',#10446,#10447);+#10446 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#10447 = VECTOR('',#10448,1.);+#10448 = DIRECTION('',(0.,-1.));+#10449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10450 = ADVANCED_FACE('',(#10451),#9999,.T.);+#10451 = FACE_BOUND('',#10452,.T.);+#10452 = EDGE_LOOP('',(#10453,#10477,#10478,#10479));+#10453 = ORIENTED_EDGE('',*,*,#10454,.T.);+#10454 = EDGE_CURVE('',#10455,#10406,#10457,.T.);+#10455 = VERTEX_POINT('',#10456);+#10456 = CARTESIAN_POINT('',(-2.429496640897,1.7,0.2479055467));+#10457 = SURFACE_CURVE('',#10458,(#10463,#10470),.PCURVE_S1.);+#10458 = CIRCLE('',#10459,0.3);+#10459 = AXIS2_PLACEMENT_3D('',#10460,#10461,#10462);+#10460 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3));+#10461 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#10462 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#10463 = PCURVE('',#9999,#10464);+#10464 = DEFINITIONAL_REPRESENTATION('',(#10465),#10469);+#10465 = LINE('',#10466,#10467);+#10466 = CARTESIAN_POINT('',(6.28318530718,0.));+#10467 = VECTOR('',#10468,1.);+#10468 = DIRECTION('',(-1.,0.));+#10469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10470 = PCURVE('',#2082,#10471);+#10471 = DEFINITIONAL_REPRESENTATION('',(#10472),#10476);+#10472 = CIRCLE('',#10473,0.3);+#10473 = AXIS2_PLACEMENT_2D('',#10474,#10475);+#10474 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#10475 = DIRECTION('',(-0.173648177667,0.984807753012));+#10476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10477 = ORIENTED_EDGE('',*,*,#10405,.T.);+#10478 = ORIENTED_EDGE('',*,*,#9982,.F.);+#10479 = ORIENTED_EDGE('',*,*,#10480,.F.);+#10480 = EDGE_CURVE('',#10455,#9955,#10481,.T.);+#10481 = SURFACE_CURVE('',#10482,(#10486,#10493),.PCURVE_S1.);+#10482 = LINE('',#10483,#10484);+#10483 = CARTESIAN_POINT('',(-2.429496640897,1.7,0.2479055467));+#10484 = VECTOR('',#10485,1.);+#10485 = DIRECTION('',(1.144237745222E-17,1.,0.));+#10486 = PCURVE('',#9999,#10487);+#10487 = DEFINITIONAL_REPRESENTATION('',(#10488),#10492);+#10488 = LINE('',#10489,#10490);+#10489 = CARTESIAN_POINT('',(6.28318530718,0.));+#10490 = VECTOR('',#10491,1.);+#10491 = DIRECTION('',(0.,-1.));+#10492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10493 = PCURVE('',#9970,#10494);+#10494 = DEFINITIONAL_REPRESENTATION('',(#10495),#10499);+#10495 = LINE('',#10496,#10497);+#10496 = CARTESIAN_POINT('',(0.501052433606,9.270141137704E-19));+#10497 = VECTOR('',#10498,1.);+#10498 = DIRECTION('',(5.385465771581E-30,-1.));+#10499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10500 = ADVANCED_FACE('',(#10501),#9970,.F.);+#10501 = FACE_BOUND('',#10502,.F.);+#10502 = EDGE_LOOP('',(#10503,#10526,#10527,#10528));+#10503 = ORIENTED_EDGE('',*,*,#10504,.T.);+#10504 = EDGE_CURVE('',#10505,#9922,#10507,.T.);+#10505 = VERTEX_POINT('',#10506);+#10506 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767));+#10507 = SURFACE_CURVE('',#10508,(#10512,#10519),.PCURVE_S1.);+#10508 = LINE('',#10509,#10510);+#10509 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767));+#10510 = VECTOR('',#10511,1.);+#10511 = DIRECTION('',(1.144237745222E-17,1.,0.));+#10512 = PCURVE('',#9970,#10513);+#10513 = DEFINITIONAL_REPRESENTATION('',(#10514),#10518);+#10514 = LINE('',#10515,#10516);+#10515 = CARTESIAN_POINT('',(0.,-0.));+#10516 = VECTOR('',#10517,1.);+#10517 = DIRECTION('',(5.385465771581E-30,-1.));+#10518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10519 = PCURVE('',#9942,#10520);+#10520 = DEFINITIONAL_REPRESENTATION('',(#10521),#10525);+#10521 = LINE('',#10522,#10523);+#10522 = CARTESIAN_POINT('',(1.396263401592,0.));+#10523 = VECTOR('',#10524,1.);+#10524 = DIRECTION('',(0.,-1.));+#10525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10526 = ORIENTED_EDGE('',*,*,#9954,.T.);+#10527 = ORIENTED_EDGE('',*,*,#10480,.F.);+#10528 = ORIENTED_EDGE('',*,*,#10529,.F.);+#10529 = EDGE_CURVE('',#10505,#10455,#10530,.T.);+#10530 = SURFACE_CURVE('',#10531,(#10535,#10542),.PCURVE_S1.);+#10531 = LINE('',#10532,#10533);+#10532 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767));+#10533 = VECTOR('',#10534,1.);+#10534 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#10535 = PCURVE('',#9970,#10536);+#10536 = DEFINITIONAL_REPRESENTATION('',(#10537),#10541);+#10537 = LINE('',#10538,#10539);+#10538 = CARTESIAN_POINT('',(0.,-0.));+#10539 = VECTOR('',#10540,1.);+#10540 = DIRECTION('',(1.,5.984962792299E-34));+#10541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10542 = PCURVE('',#2082,#10543);+#10543 = DEFINITIONAL_REPRESENTATION('',(#10544),#10548);+#10544 = LINE('',#10545,#10546);+#10545 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#10546 = VECTOR('',#10547,1.);+#10547 = DIRECTION('',(-0.986841372087,-0.161691392282));+#10548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10549 = ADVANCED_FACE('',(#10550),#9942,.F.);+#10550 = FACE_BOUND('',#10551,.F.);+#10551 = EDGE_LOOP('',(#10552,#10575,#10576,#10577));+#10552 = ORIENTED_EDGE('',*,*,#10553,.T.);+#10553 = EDGE_CURVE('',#10554,#9899,#10556,.T.);+#10554 = VERTEX_POINT('',#10555);+#10555 = CARTESIAN_POINT('',(-2.25,1.7,0.825));+#10556 = SURFACE_CURVE('',#10557,(#10561,#10568),.PCURVE_S1.);+#10557 = LINE('',#10558,#10559);+#10558 = CARTESIAN_POINT('',(-2.25,1.7,0.825));+#10559 = VECTOR('',#10560,1.);+#10560 = DIRECTION('',(1.144237745222E-17,1.,0.));+#10561 = PCURVE('',#9942,#10562);+#10562 = DEFINITIONAL_REPRESENTATION('',(#10563),#10567);+#10563 = LINE('',#10564,#10565);+#10564 = CARTESIAN_POINT('',(0.,0.));+#10565 = VECTOR('',#10566,1.);+#10566 = DIRECTION('',(0.,-1.));+#10567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10568 = PCURVE('',#306,#10569);+#10569 = DEFINITIONAL_REPRESENTATION('',(#10570),#10574);+#10570 = LINE('',#10571,#10572);+#10571 = CARTESIAN_POINT('',(0.45,5.149069853499E-18));+#10572 = VECTOR('',#10573,1.);+#10573 = DIRECTION('',(0.,-1.));+#10574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10575 = ORIENTED_EDGE('',*,*,#9921,.T.);+#10576 = ORIENTED_EDGE('',*,*,#10504,.F.);+#10577 = ORIENTED_EDGE('',*,*,#10578,.F.);+#10578 = EDGE_CURVE('',#10554,#10505,#10579,.T.);+#10579 = SURFACE_CURVE('',#10580,(#10585,#10592),.PCURVE_S1.);+#10580 = CIRCLE('',#10581,0.1);+#10581 = AXIS2_PLACEMENT_3D('',#10582,#10583,#10584);+#10582 = CARTESIAN_POINT('',(-2.25,1.7,0.725));+#10583 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#10584 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#10585 = PCURVE('',#9942,#10586);+#10586 = DEFINITIONAL_REPRESENTATION('',(#10587),#10591);+#10587 = LINE('',#10588,#10589);+#10588 = CARTESIAN_POINT('',(0.,0.));+#10589 = VECTOR('',#10590,1.);+#10590 = DIRECTION('',(1.,0.));+#10591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10592 = PCURVE('',#2082,#10593);+#10593 = DEFINITIONAL_REPRESENTATION('',(#10594),#10602);+#10594 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10595,#10596,#10597,#10598+ ,#10599,#10600,#10601),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10595 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#10596 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#10597 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#10598 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#10599 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#10600 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#10601 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#10602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10603 = ADVANCED_FACE('',(#10604),#2110,.T.);+#10604 = FACE_BOUND('',#10605,.T.);+#10605 = EDGE_LOOP('',(#10606,#10628,#10629,#10630));+#10606 = ORIENTED_EDGE('',*,*,#10607,.T.);+#10607 = EDGE_CURVE('',#10207,#2067,#10608,.T.);+#10608 = SURFACE_CURVE('',#10609,(#10614,#10621),.PCURVE_S1.);+#10609 = CIRCLE('',#10610,0.3);+#10610 = AXIS2_PLACEMENT_3D('',#10611,#10612,#10613);+#10611 = CARTESIAN_POINT('',(-2.25,1.7,0.725));+#10612 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#10613 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#10614 = PCURVE('',#2110,#10615);+#10615 = DEFINITIONAL_REPRESENTATION('',(#10616),#10620);+#10616 = LINE('',#10617,#10618);+#10617 = CARTESIAN_POINT('',(6.28318530718,0.));+#10618 = VECTOR('',#10619,1.);+#10619 = DIRECTION('',(-1.,0.));+#10620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10621 = PCURVE('',#2082,#10622);+#10622 = DEFINITIONAL_REPRESENTATION('',(#10623),#10627);+#10623 = CIRCLE('',#10624,0.3);+#10624 = AXIS2_PLACEMENT_2D('',#10625,#10626);+#10625 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#10626 = DIRECTION('',(0.173648177667,-0.984807753012));+#10627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10628 = ORIENTED_EDGE('',*,*,#2094,.T.);+#10629 = ORIENTED_EDGE('',*,*,#10156,.F.);+#10630 = ORIENTED_EDGE('',*,*,#10206,.F.);+#10631 = ADVANCED_FACE('',(#10632),#2082,.F.);+#10632 = FACE_BOUND('',#10633,.F.);+#10633 = EDGE_LOOP('',(#10634,#10655,#10676,#10677,#10678,#10679,#10680,+ #10681,#10682,#10683,#10684,#10685));+#10634 = ORIENTED_EDGE('',*,*,#10635,.F.);+#10635 = EDGE_CURVE('',#291,#2044,#10636,.T.);+#10636 = SURFACE_CURVE('',#10637,(#10641,#10648),.PCURVE_S1.);+#10637 = LINE('',#10638,#10639);+#10638 = CARTESIAN_POINT('',(-1.95,1.7,0.786976568901));+#10639 = VECTOR('',#10640,1.);+#10640 = DIRECTION('',(0.,0.,1.));+#10641 = PCURVE('',#2082,#10642);+#10642 = DEFINITIONAL_REPRESENTATION('',(#10643),#10647);+#10643 = LINE('',#10644,#10645);+#10644 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#10645 = VECTOR('',#10646,1.);+#10646 = DIRECTION('',(1.,0.));+#10647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10648 = PCURVE('',#334,#10649);+#10649 = DEFINITIONAL_REPRESENTATION('',(#10650),#10654);+#10650 = LINE('',#10651,#10652);+#10651 = CARTESIAN_POINT('',(3.975,-0.238023431099));+#10652 = VECTOR('',#10653,1.);+#10653 = DIRECTION('',(0.,1.));+#10654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10655 = ORIENTED_EDGE('',*,*,#10656,.T.);+#10656 = EDGE_CURVE('',#291,#10554,#10657,.T.);+#10657 = SURFACE_CURVE('',#10658,(#10662,#10669),.PCURVE_S1.);+#10658 = LINE('',#10659,#10660);+#10659 = CARTESIAN_POINT('',(-1.8,1.7,0.825));+#10660 = VECTOR('',#10661,1.);+#10661 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#10662 = PCURVE('',#2082,#10663);+#10663 = DEFINITIONAL_REPRESENTATION('',(#10664),#10668);+#10664 = LINE('',#10665,#10666);+#10665 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#10666 = VECTOR('',#10667,1.);+#10667 = DIRECTION('',(0.,-1.));+#10668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10669 = PCURVE('',#306,#10670);+#10670 = DEFINITIONAL_REPRESENTATION('',(#10671),#10675);+#10671 = LINE('',#10672,#10673);+#10672 = CARTESIAN_POINT('',(0.,0.));+#10673 = VECTOR('',#10674,1.);+#10674 = DIRECTION('',(1.,0.));+#10675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10676 = ORIENTED_EDGE('',*,*,#10578,.T.);+#10677 = ORIENTED_EDGE('',*,*,#10529,.T.);+#10678 = ORIENTED_EDGE('',*,*,#10454,.T.);+#10679 = ORIENTED_EDGE('',*,*,#10430,.T.);+#10680 = ORIENTED_EDGE('',*,*,#10381,.T.);+#10681 = ORIENTED_EDGE('',*,*,#10332,.T.);+#10682 = ORIENTED_EDGE('',*,*,#10278,.T.);+#10683 = ORIENTED_EDGE('',*,*,#10229,.T.);+#10684 = ORIENTED_EDGE('',*,*,#10607,.T.);+#10685 = ORIENTED_EDGE('',*,*,#2066,.T.);+#10686 = ADVANCED_FACE('',(#10687),#2031,.T.);+#10687 = FACE_BOUND('',#10688,.T.);+#10688 = EDGE_LOOP('',(#10689,#10710,#10733,#10766,#10794,#10823,#10851,+ #10879,#10907,#10940,#10968,#10990));+#10689 = ORIENTED_EDGE('',*,*,#10690,.F.);+#10690 = EDGE_CURVE('',#319,#2016,#10691,.T.);+#10691 = SURFACE_CURVE('',#10692,(#10696,#10703),.PCURVE_S1.);+#10692 = LINE('',#10693,#10694);+#10693 = CARTESIAN_POINT('',(-1.95,0.84,0.786976568901));+#10694 = VECTOR('',#10695,1.);+#10695 = DIRECTION('',(0.,0.,1.));+#10696 = PCURVE('',#2031,#10697);+#10697 = DEFINITIONAL_REPRESENTATION('',(#10698),#10702);+#10698 = LINE('',#10699,#10700);+#10699 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#10700 = VECTOR('',#10701,1.);+#10701 = DIRECTION('',(1.,0.));+#10702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10703 = PCURVE('',#334,#10704);+#10704 = DEFINITIONAL_REPRESENTATION('',(#10705),#10709);+#10705 = LINE('',#10706,#10707);+#10706 = CARTESIAN_POINT('',(3.115,-0.238023431099));+#10707 = VECTOR('',#10708,1.);+#10708 = DIRECTION('',(0.,1.));+#10709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10710 = ORIENTED_EDGE('',*,*,#10711,.T.);+#10711 = EDGE_CURVE('',#319,#10712,#10714,.T.);+#10712 = VERTEX_POINT('',#10713);+#10713 = CARTESIAN_POINT('',(-2.25,0.84,0.825));+#10714 = SURFACE_CURVE('',#10715,(#10719,#10726),.PCURVE_S1.);+#10715 = LINE('',#10716,#10717);+#10716 = CARTESIAN_POINT('',(-1.8,0.84,0.825));+#10717 = VECTOR('',#10718,1.);+#10718 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#10719 = PCURVE('',#2031,#10720);+#10720 = DEFINITIONAL_REPRESENTATION('',(#10721),#10725);+#10721 = LINE('',#10722,#10723);+#10722 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#10723 = VECTOR('',#10724,1.);+#10724 = DIRECTION('',(0.,-1.));+#10725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10726 = PCURVE('',#362,#10727);+#10727 = DEFINITIONAL_REPRESENTATION('',(#10728),#10732);+#10728 = LINE('',#10729,#10730);+#10729 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#10730 = VECTOR('',#10731,1.);+#10731 = DIRECTION('',(1.,0.));+#10732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10733 = ORIENTED_EDGE('',*,*,#10734,.T.);+#10734 = EDGE_CURVE('',#10712,#10735,#10737,.T.);+#10735 = VERTEX_POINT('',#10736);+#10736 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.742364817767));+#10737 = SURFACE_CURVE('',#10738,(#10743,#10754),.PCURVE_S1.);+#10738 = CIRCLE('',#10739,0.1);+#10739 = AXIS2_PLACEMENT_3D('',#10740,#10741,#10742);+#10740 = CARTESIAN_POINT('',(-2.25,0.84,0.725));+#10741 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#10742 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#10743 = PCURVE('',#2031,#10744);+#10744 = DEFINITIONAL_REPRESENTATION('',(#10745),#10753);+#10745 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10746,#10747,#10748,#10749+ ,#10750,#10751,#10752),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10746 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#10747 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#10748 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#10749 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#10750 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#10751 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#10752 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#10753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10754 = PCURVE('',#10755,#10760);+#10755 = CYLINDRICAL_SURFACE('',#10756,0.1);+#10756 = AXIS2_PLACEMENT_3D('',#10757,#10758,#10759);+#10757 = CARTESIAN_POINT('',(-2.25,0.43,0.725));+#10758 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#10759 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#10760 = DEFINITIONAL_REPRESENTATION('',(#10761),#10765);+#10761 = LINE('',#10762,#10763);+#10762 = CARTESIAN_POINT('',(0.,-0.41));+#10763 = VECTOR('',#10764,1.);+#10764 = DIRECTION('',(1.,0.));+#10765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10766 = ORIENTED_EDGE('',*,*,#10767,.T.);+#10767 = EDGE_CURVE('',#10735,#10768,#10770,.T.);+#10768 = VERTEX_POINT('',#10769);+#10769 = CARTESIAN_POINT('',(-2.429496640897,0.84,0.2479055467));+#10770 = SURFACE_CURVE('',#10771,(#10775,#10782),.PCURVE_S1.);+#10771 = LINE('',#10772,#10773);+#10772 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.742364817767));+#10773 = VECTOR('',#10774,1.);+#10774 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#10775 = PCURVE('',#2031,#10776);+#10776 = DEFINITIONAL_REPRESENTATION('',(#10777),#10781);+#10777 = LINE('',#10778,#10779);+#10778 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#10779 = VECTOR('',#10780,1.);+#10780 = DIRECTION('',(-0.986841372087,-0.161691392282));+#10781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10782 = PCURVE('',#10783,#10788);+#10783 = PLANE('',#10784);+#10784 = AXIS2_PLACEMENT_3D('',#10785,#10786,#10787);+#10785 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767));+#10786 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282+ ));+#10787 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#10788 = DEFINITIONAL_REPRESENTATION('',(#10789),#10793);+#10789 = LINE('',#10790,#10791);+#10790 = CARTESIAN_POINT('',(7.585549159209E-19,-0.41));+#10791 = VECTOR('',#10792,1.);+#10792 = DIRECTION('',(1.,5.984962792299E-34));+#10793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10794 = ORIENTED_EDGE('',*,*,#10795,.T.);+#10795 = EDGE_CURVE('',#10768,#10796,#10798,.T.);+#10796 = VERTEX_POINT('',#10797);+#10797 = CARTESIAN_POINT('',(-2.724938966801,0.84,-1.665334536938E-16));+#10798 = SURFACE_CURVE('',#10799,(#10804,#10811),.PCURVE_S1.);+#10799 = CIRCLE('',#10800,0.3);+#10800 = AXIS2_PLACEMENT_3D('',#10801,#10802,#10803);+#10801 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.3));+#10802 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#10803 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#10804 = PCURVE('',#2031,#10805);+#10805 = DEFINITIONAL_REPRESENTATION('',(#10806),#10810);+#10806 = CIRCLE('',#10807,0.3);+#10807 = AXIS2_PLACEMENT_2D('',#10808,#10809);+#10808 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#10809 = DIRECTION('',(-0.173648177667,0.984807753012));+#10810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10811 = PCURVE('',#10812,#10817);+#10812 = CYLINDRICAL_SURFACE('',#10813,0.3);+#10813 = AXIS2_PLACEMENT_3D('',#10814,#10815,#10816);+#10814 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3));+#10815 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#10816 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#10817 = DEFINITIONAL_REPRESENTATION('',(#10818),#10822);+#10818 = LINE('',#10819,#10820);+#10819 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#10820 = VECTOR('',#10821,1.);+#10821 = DIRECTION('',(-1.,0.));+#10822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10823 = ORIENTED_EDGE('',*,*,#10824,.T.);+#10824 = EDGE_CURVE('',#10796,#10825,#10827,.T.);+#10825 = VERTEX_POINT('',#10826);+#10826 = CARTESIAN_POINT('',(-3.,0.84,-1.665334536938E-16));+#10827 = SURFACE_CURVE('',#10828,(#10832,#10839),.PCURVE_S1.);+#10828 = LINE('',#10829,#10830);+#10829 = CARTESIAN_POINT('',(-2.724938966801,0.84,-1.665334536938E-16));+#10830 = VECTOR('',#10831,1.);+#10831 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#10832 = PCURVE('',#2031,#10833);+#10833 = DEFINITIONAL_REPRESENTATION('',(#10834),#10838);+#10834 = LINE('',#10835,#10836);+#10835 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#10836 = VECTOR('',#10837,1.);+#10837 = DIRECTION('',(0.,-1.));+#10838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10839 = PCURVE('',#10840,#10845);+#10840 = PLANE('',#10841);+#10841 = AXIS2_PLACEMENT_3D('',#10842,#10843,#10844);+#10842 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16));+#10843 = DIRECTION('',(0.,0.,1.));+#10844 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#10845 = DEFINITIONAL_REPRESENTATION('',(#10846),#10850);+#10846 = LINE('',#10847,#10848);+#10847 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#10848 = VECTOR('',#10849,1.);+#10849 = DIRECTION('',(1.,0.));+#10850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10851 = ORIENTED_EDGE('',*,*,#10852,.T.);+#10852 = EDGE_CURVE('',#10825,#10853,#10855,.T.);+#10853 = VERTEX_POINT('',#10854);+#10854 = CARTESIAN_POINT('',(-3.,0.84,0.2));+#10855 = SURFACE_CURVE('',#10856,(#10860,#10867),.PCURVE_S1.);+#10856 = LINE('',#10857,#10858);+#10857 = CARTESIAN_POINT('',(-3.,0.84,-1.665334536938E-16));+#10858 = VECTOR('',#10859,1.);+#10859 = DIRECTION('',(0.,0.,1.));+#10860 = PCURVE('',#2031,#10861);+#10861 = DEFINITIONAL_REPRESENTATION('',(#10862),#10866);+#10862 = LINE('',#10863,#10864);+#10863 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#10864 = VECTOR('',#10865,1.);+#10865 = DIRECTION('',(1.,0.));+#10866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10867 = PCURVE('',#10868,#10873);+#10868 = PLANE('',#10869);+#10869 = AXIS2_PLACEMENT_3D('',#10870,#10871,#10872);+#10870 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16));+#10871 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#10872 = DIRECTION('',(0.,0.,1.));+#10873 = DEFINITIONAL_REPRESENTATION('',(#10874),#10878);+#10874 = LINE('',#10875,#10876);+#10875 = CARTESIAN_POINT('',(0.,-0.41));+#10876 = VECTOR('',#10877,1.);+#10877 = DIRECTION('',(1.,0.));+#10878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10879 = ORIENTED_EDGE('',*,*,#10880,.T.);+#10880 = EDGE_CURVE('',#10853,#10881,#10883,.T.);+#10881 = VERTEX_POINT('',#10882);+#10882 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.2));+#10883 = SURFACE_CURVE('',#10884,(#10888,#10895),.PCURVE_S1.);+#10884 = LINE('',#10885,#10886);+#10885 = CARTESIAN_POINT('',(-3.,0.84,0.2));+#10886 = VECTOR('',#10887,1.);+#10887 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#10888 = PCURVE('',#2031,#10889);+#10889 = DEFINITIONAL_REPRESENTATION('',(#10890),#10894);+#10890 = LINE('',#10891,#10892);+#10891 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#10892 = VECTOR('',#10893,1.);+#10893 = DIRECTION('',(0.,1.));+#10894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10895 = PCURVE('',#10896,#10901);+#10896 = PLANE('',#10897);+#10897 = AXIS2_PLACEMENT_3D('',#10898,#10899,#10900);+#10898 = CARTESIAN_POINT('',(-3.,0.43,0.2));+#10899 = DIRECTION('',(0.,0.,-1.));+#10900 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#10901 = DEFINITIONAL_REPRESENTATION('',(#10902),#10906);+#10902 = LINE('',#10903,#10904);+#10903 = CARTESIAN_POINT('',(-4.69137475541E-18,-0.41));+#10904 = VECTOR('',#10905,1.);+#10905 = DIRECTION('',(1.,0.));+#10906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10907 = ORIENTED_EDGE('',*,*,#10908,.T.);+#10908 = EDGE_CURVE('',#10881,#10909,#10911,.T.);+#10909 = VERTEX_POINT('',#10910);+#10910 = CARTESIAN_POINT('',(-2.6264581915,0.84,0.282635182233));+#10911 = SURFACE_CURVE('',#10912,(#10917,#10928),.PCURVE_S1.);+#10912 = CIRCLE('',#10913,0.1);+#10913 = AXIS2_PLACEMENT_3D('',#10914,#10915,#10916);+#10914 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.3));+#10915 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#10916 = DIRECTION('',(0.,0.,-1.));+#10917 = PCURVE('',#2031,#10918);+#10918 = DEFINITIONAL_REPRESENTATION('',(#10919),#10927);+#10919 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10920,#10921,#10922,#10923+ ,#10924,#10925,#10926),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10920 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#10921 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#10922 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#10923 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#10924 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#10925 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#10926 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#10927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10928 = PCURVE('',#10929,#10934);+#10929 = CYLINDRICAL_SURFACE('',#10930,0.1);+#10930 = AXIS2_PLACEMENT_3D('',#10931,#10932,#10933);+#10931 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3));+#10932 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#10933 = DIRECTION('',(-0.,0.,-1.));+#10934 = DEFINITIONAL_REPRESENTATION('',(#10935),#10939);+#10935 = LINE('',#10936,#10937);+#10936 = CARTESIAN_POINT('',(0.,-0.41));+#10937 = VECTOR('',#10938,1.);+#10938 = DIRECTION('',(1.,0.));+#10939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10940 = ORIENTED_EDGE('',*,*,#10941,.T.);+#10941 = EDGE_CURVE('',#10909,#10942,#10944,.T.);+#10942 = VERTEX_POINT('',#10943);+#10943 = CARTESIAN_POINT('',(-2.545442325904,0.84,0.7770944533));+#10944 = SURFACE_CURVE('',#10945,(#10949,#10956),.PCURVE_S1.);+#10945 = LINE('',#10946,#10947);+#10946 = CARTESIAN_POINT('',(-2.6264581915,0.84,0.282635182233));+#10947 = VECTOR('',#10948,1.);+#10948 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#10949 = PCURVE('',#2031,#10950);+#10950 = DEFINITIONAL_REPRESENTATION('',(#10951),#10955);+#10951 = LINE('',#10952,#10953);+#10952 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#10953 = VECTOR('',#10954,1.);+#10954 = DIRECTION('',(0.986841372087,0.161691392282));+#10955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10956 = PCURVE('',#10957,#10962);+#10957 = PLANE('',#10958);+#10958 = AXIS2_PLACEMENT_3D('',#10959,#10960,#10961);+#10959 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233));+#10960 = DIRECTION('',(0.986841372087,-1.129181146488E-17,+ -0.161691392282));+#10961 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#10962 = DEFINITIONAL_REPRESENTATION('',(#10963),#10967);+#10963 = LINE('',#10964,#10965);+#10964 = CARTESIAN_POINT('',(-7.585549159209E-19,-0.41));+#10965 = VECTOR('',#10966,1.);+#10966 = DIRECTION('',(1.,-5.984962792299E-34));+#10967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10968 = ORIENTED_EDGE('',*,*,#10969,.T.);+#10969 = EDGE_CURVE('',#10942,#1988,#10970,.T.);+#10970 = SURFACE_CURVE('',#10971,(#10976,#10983),.PCURVE_S1.);+#10971 = CIRCLE('',#10972,0.3);+#10972 = AXIS2_PLACEMENT_3D('',#10973,#10974,#10975);+#10973 = CARTESIAN_POINT('',(-2.25,0.84,0.725));+#10974 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#10975 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#10976 = PCURVE('',#2031,#10977);+#10977 = DEFINITIONAL_REPRESENTATION('',(#10978),#10982);+#10978 = CIRCLE('',#10979,0.3);+#10979 = AXIS2_PLACEMENT_2D('',#10980,#10981);+#10980 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#10981 = DIRECTION('',(0.173648177667,-0.984807753012));+#10982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10983 = PCURVE('',#2003,#10984);+#10984 = DEFINITIONAL_REPRESENTATION('',(#10985),#10989);+#10985 = LINE('',#10986,#10987);+#10986 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#10987 = VECTOR('',#10988,1.);+#10988 = DIRECTION('',(-1.,0.));+#10989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10990 = ORIENTED_EDGE('',*,*,#2015,.T.);+#10991 = ADVANCED_FACE('',(#10992),#10957,.F.);+#10992 = FACE_BOUND('',#10993,.F.);+#10993 = EDGE_LOOP('',(#10994,#11017,#11018,#11041));+#10994 = ORIENTED_EDGE('',*,*,#10995,.T.);+#10995 = EDGE_CURVE('',#10996,#10909,#10998,.T.);+#10996 = VERTEX_POINT('',#10997);+#10997 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233));+#10998 = SURFACE_CURVE('',#10999,(#11003,#11010),.PCURVE_S1.);+#10999 = LINE('',#11000,#11001);+#11000 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233));+#11001 = VECTOR('',#11002,1.);+#11002 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11003 = PCURVE('',#10957,#11004);+#11004 = DEFINITIONAL_REPRESENTATION('',(#11005),#11009);+#11005 = LINE('',#11006,#11007);+#11006 = CARTESIAN_POINT('',(0.,-0.));+#11007 = VECTOR('',#11008,1.);+#11008 = DIRECTION('',(-5.385465771581E-30,-1.));+#11009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11010 = PCURVE('',#10929,#11011);+#11011 = DEFINITIONAL_REPRESENTATION('',(#11012),#11016);+#11012 = LINE('',#11013,#11014);+#11013 = CARTESIAN_POINT('',(1.396263401592,0.));+#11014 = VECTOR('',#11015,1.);+#11015 = DIRECTION('',(0.,-1.));+#11016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11017 = ORIENTED_EDGE('',*,*,#10941,.T.);+#11018 = ORIENTED_EDGE('',*,*,#11019,.F.);+#11019 = EDGE_CURVE('',#11020,#10942,#11022,.T.);+#11020 = VERTEX_POINT('',#11021);+#11021 = CARTESIAN_POINT('',(-2.545442325904,0.43,0.7770944533));+#11022 = SURFACE_CURVE('',#11023,(#11027,#11034),.PCURVE_S1.);+#11023 = LINE('',#11024,#11025);+#11024 = CARTESIAN_POINT('',(-2.545442325904,0.43,0.7770944533));+#11025 = VECTOR('',#11026,1.);+#11026 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11027 = PCURVE('',#10957,#11028);+#11028 = DEFINITIONAL_REPRESENTATION('',(#11029),#11033);+#11029 = LINE('',#11030,#11031);+#11030 = CARTESIAN_POINT('',(0.501052433606,-9.270141137704E-19));+#11031 = VECTOR('',#11032,1.);+#11032 = DIRECTION('',(-5.385465771581E-30,-1.));+#11033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11034 = PCURVE('',#2003,#11035);+#11035 = DEFINITIONAL_REPRESENTATION('',(#11036),#11040);+#11036 = LINE('',#11037,#11038);+#11037 = CARTESIAN_POINT('',(6.28318530718,5.551115123126E-17));+#11038 = VECTOR('',#11039,1.);+#11039 = DIRECTION('',(0.,-1.));+#11040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11041 = ORIENTED_EDGE('',*,*,#11042,.F.);+#11042 = EDGE_CURVE('',#10996,#11020,#11043,.T.);+#11043 = SURFACE_CURVE('',#11044,(#11048,#11055),.PCURVE_S1.);+#11044 = LINE('',#11045,#11046);+#11045 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233));+#11046 = VECTOR('',#11047,1.);+#11047 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#11048 = PCURVE('',#10957,#11049);+#11049 = DEFINITIONAL_REPRESENTATION('',(#11050),#11054);+#11050 = LINE('',#11051,#11052);+#11051 = CARTESIAN_POINT('',(0.,-0.));+#11052 = VECTOR('',#11053,1.);+#11053 = DIRECTION('',(1.,-5.984962792299E-34));+#11054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11055 = PCURVE('',#1975,#11056);+#11056 = DEFINITIONAL_REPRESENTATION('',(#11057),#11061);+#11057 = LINE('',#11058,#11059);+#11058 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#11059 = VECTOR('',#11060,1.);+#11060 = DIRECTION('',(0.986841372087,0.161691392282));+#11061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11062 = ADVANCED_FACE('',(#11063),#10929,.F.);+#11063 = FACE_BOUND('',#11064,.F.);+#11064 = EDGE_LOOP('',(#11065,#11088,#11089,#11090));+#11065 = ORIENTED_EDGE('',*,*,#11066,.T.);+#11066 = EDGE_CURVE('',#11067,#10881,#11069,.T.);+#11067 = VERTEX_POINT('',#11068);+#11068 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.2));+#11069 = SURFACE_CURVE('',#11070,(#11074,#11081),.PCURVE_S1.);+#11070 = LINE('',#11071,#11072);+#11071 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.2));+#11072 = VECTOR('',#11073,1.);+#11073 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11074 = PCURVE('',#10929,#11075);+#11075 = DEFINITIONAL_REPRESENTATION('',(#11076),#11080);+#11076 = LINE('',#11077,#11078);+#11077 = CARTESIAN_POINT('',(0.,0.));+#11078 = VECTOR('',#11079,1.);+#11079 = DIRECTION('',(0.,-1.));+#11080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11081 = PCURVE('',#10896,#11082);+#11082 = DEFINITIONAL_REPRESENTATION('',(#11083),#11087);+#11083 = LINE('',#11084,#11085);+#11084 = CARTESIAN_POINT('',(0.275061033199,-3.147352164261E-18));+#11085 = VECTOR('',#11086,1.);+#11086 = DIRECTION('',(0.,-1.));+#11087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11088 = ORIENTED_EDGE('',*,*,#10908,.T.);+#11089 = ORIENTED_EDGE('',*,*,#10995,.F.);+#11090 = ORIENTED_EDGE('',*,*,#11091,.F.);+#11091 = EDGE_CURVE('',#11067,#10996,#11092,.T.);+#11092 = SURFACE_CURVE('',#11093,(#11098,#11105),.PCURVE_S1.);+#11093 = CIRCLE('',#11094,0.1);+#11094 = AXIS2_PLACEMENT_3D('',#11095,#11096,#11097);+#11095 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3));+#11096 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#11097 = DIRECTION('',(0.,0.,-1.));+#11098 = PCURVE('',#10929,#11099);+#11099 = DEFINITIONAL_REPRESENTATION('',(#11100),#11104);+#11100 = LINE('',#11101,#11102);+#11101 = CARTESIAN_POINT('',(0.,0.));+#11102 = VECTOR('',#11103,1.);+#11103 = DIRECTION('',(1.,0.));+#11104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11105 = PCURVE('',#1975,#11106);+#11106 = DEFINITIONAL_REPRESENTATION('',(#11107),#11115);+#11107 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11108,#11109,#11110,#11111+ ,#11112,#11113,#11114),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11108 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#11109 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#11110 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#11111 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#11112 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#11113 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#11114 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#11115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11116 = ADVANCED_FACE('',(#11117),#10896,.F.);+#11117 = FACE_BOUND('',#11118,.F.);+#11118 = EDGE_LOOP('',(#11119,#11142,#11143,#11144));+#11119 = ORIENTED_EDGE('',*,*,#11120,.T.);+#11120 = EDGE_CURVE('',#11121,#10853,#11123,.T.);+#11121 = VERTEX_POINT('',#11122);+#11122 = CARTESIAN_POINT('',(-3.,0.43,0.2));+#11123 = SURFACE_CURVE('',#11124,(#11128,#11135),.PCURVE_S1.);+#11124 = LINE('',#11125,#11126);+#11125 = CARTESIAN_POINT('',(-3.,0.43,0.2));+#11126 = VECTOR('',#11127,1.);+#11127 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11128 = PCURVE('',#10896,#11129);+#11129 = DEFINITIONAL_REPRESENTATION('',(#11130),#11134);+#11130 = LINE('',#11131,#11132);+#11131 = CARTESIAN_POINT('',(0.,-0.));+#11132 = VECTOR('',#11133,1.);+#11133 = DIRECTION('',(0.,-1.));+#11134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11135 = PCURVE('',#10868,#11136);+#11136 = DEFINITIONAL_REPRESENTATION('',(#11137),#11141);+#11137 = LINE('',#11138,#11139);+#11138 = CARTESIAN_POINT('',(0.2,0.));+#11139 = VECTOR('',#11140,1.);+#11140 = DIRECTION('',(0.,-1.));+#11141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11142 = ORIENTED_EDGE('',*,*,#10880,.T.);+#11143 = ORIENTED_EDGE('',*,*,#11066,.F.);+#11144 = ORIENTED_EDGE('',*,*,#11145,.F.);+#11145 = EDGE_CURVE('',#11121,#11067,#11146,.T.);+#11146 = SURFACE_CURVE('',#11147,(#11151,#11158),.PCURVE_S1.);+#11147 = LINE('',#11148,#11149);+#11148 = CARTESIAN_POINT('',(-3.,0.43,0.2));+#11149 = VECTOR('',#11150,1.);+#11150 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#11151 = PCURVE('',#10896,#11152);+#11152 = DEFINITIONAL_REPRESENTATION('',(#11153),#11157);+#11153 = LINE('',#11154,#11155);+#11154 = CARTESIAN_POINT('',(0.,-0.));+#11155 = VECTOR('',#11156,1.);+#11156 = DIRECTION('',(1.,0.));+#11157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11158 = PCURVE('',#1975,#11159);+#11159 = DEFINITIONAL_REPRESENTATION('',(#11160),#11164);+#11160 = LINE('',#11161,#11162);+#11161 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#11162 = VECTOR('',#11163,1.);+#11163 = DIRECTION('',(0.,1.));+#11164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11165 = ADVANCED_FACE('',(#11166),#10868,.F.);+#11166 = FACE_BOUND('',#11167,.F.);+#11167 = EDGE_LOOP('',(#11168,#11191,#11192,#11193));+#11168 = ORIENTED_EDGE('',*,*,#11169,.T.);+#11169 = EDGE_CURVE('',#11170,#10825,#11172,.T.);+#11170 = VERTEX_POINT('',#11171);+#11171 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16));+#11172 = SURFACE_CURVE('',#11173,(#11177,#11184),.PCURVE_S1.);+#11173 = LINE('',#11174,#11175);+#11174 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16));+#11175 = VECTOR('',#11176,1.);+#11176 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11177 = PCURVE('',#10868,#11178);+#11178 = DEFINITIONAL_REPRESENTATION('',(#11179),#11183);+#11179 = LINE('',#11180,#11181);+#11180 = CARTESIAN_POINT('',(0.,0.));+#11181 = VECTOR('',#11182,1.);+#11182 = DIRECTION('',(0.,-1.));+#11183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11184 = PCURVE('',#10840,#11185);+#11185 = DEFINITIONAL_REPRESENTATION('',(#11186),#11190);+#11186 = LINE('',#11187,#11188);+#11187 = CARTESIAN_POINT('',(0.275061033199,3.147352164261E-18));+#11188 = VECTOR('',#11189,1.);+#11189 = DIRECTION('',(0.,-1.));+#11190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11191 = ORIENTED_EDGE('',*,*,#10852,.T.);+#11192 = ORIENTED_EDGE('',*,*,#11120,.F.);+#11193 = ORIENTED_EDGE('',*,*,#11194,.F.);+#11194 = EDGE_CURVE('',#11170,#11121,#11195,.T.);+#11195 = SURFACE_CURVE('',#11196,(#11200,#11207),.PCURVE_S1.);+#11196 = LINE('',#11197,#11198);+#11197 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16));+#11198 = VECTOR('',#11199,1.);+#11199 = DIRECTION('',(0.,0.,1.));+#11200 = PCURVE('',#10868,#11201);+#11201 = DEFINITIONAL_REPRESENTATION('',(#11202),#11206);+#11202 = LINE('',#11203,#11204);+#11203 = CARTESIAN_POINT('',(0.,0.));+#11204 = VECTOR('',#11205,1.);+#11205 = DIRECTION('',(1.,0.));+#11206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11207 = PCURVE('',#1975,#11208);+#11208 = DEFINITIONAL_REPRESENTATION('',(#11209),#11213);+#11209 = LINE('',#11210,#11211);+#11210 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#11211 = VECTOR('',#11212,1.);+#11212 = DIRECTION('',(1.,0.));+#11213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11214 = ADVANCED_FACE('',(#11215),#10840,.F.);+#11215 = FACE_BOUND('',#11216,.F.);+#11216 = EDGE_LOOP('',(#11217,#11240,#11241,#11242));+#11217 = ORIENTED_EDGE('',*,*,#11218,.T.);+#11218 = EDGE_CURVE('',#11219,#10796,#11221,.T.);+#11219 = VERTEX_POINT('',#11220);+#11220 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16));+#11221 = SURFACE_CURVE('',#11222,(#11226,#11233),.PCURVE_S1.);+#11222 = LINE('',#11223,#11224);+#11223 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16));+#11224 = VECTOR('',#11225,1.);+#11225 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11226 = PCURVE('',#10840,#11227);+#11227 = DEFINITIONAL_REPRESENTATION('',(#11228),#11232);+#11228 = LINE('',#11229,#11230);+#11229 = CARTESIAN_POINT('',(0.,0.));+#11230 = VECTOR('',#11231,1.);+#11231 = DIRECTION('',(0.,-1.));+#11232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11233 = PCURVE('',#10812,#11234);+#11234 = DEFINITIONAL_REPRESENTATION('',(#11235),#11239);+#11235 = LINE('',#11236,#11237);+#11236 = CARTESIAN_POINT('',(4.886921905584,0.));+#11237 = VECTOR('',#11238,1.);+#11238 = DIRECTION('',(0.,-1.));+#11239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11240 = ORIENTED_EDGE('',*,*,#10824,.T.);+#11241 = ORIENTED_EDGE('',*,*,#11169,.F.);+#11242 = ORIENTED_EDGE('',*,*,#11243,.F.);+#11243 = EDGE_CURVE('',#11219,#11170,#11244,.T.);+#11244 = SURFACE_CURVE('',#11245,(#11249,#11256),.PCURVE_S1.);+#11245 = LINE('',#11246,#11247);+#11246 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16));+#11247 = VECTOR('',#11248,1.);+#11248 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#11249 = PCURVE('',#10840,#11250);+#11250 = DEFINITIONAL_REPRESENTATION('',(#11251),#11255);+#11251 = LINE('',#11252,#11253);+#11252 = CARTESIAN_POINT('',(0.,0.));+#11253 = VECTOR('',#11254,1.);+#11254 = DIRECTION('',(1.,0.));+#11255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11256 = PCURVE('',#1975,#11257);+#11257 = DEFINITIONAL_REPRESENTATION('',(#11258),#11262);+#11258 = LINE('',#11259,#11260);+#11259 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#11260 = VECTOR('',#11261,1.);+#11261 = DIRECTION('',(0.,-1.));+#11262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11263 = ADVANCED_FACE('',(#11264),#10812,.T.);+#11264 = FACE_BOUND('',#11265,.T.);+#11265 = EDGE_LOOP('',(#11266,#11290,#11291,#11292));+#11266 = ORIENTED_EDGE('',*,*,#11267,.T.);+#11267 = EDGE_CURVE('',#11268,#11219,#11270,.T.);+#11268 = VERTEX_POINT('',#11269);+#11269 = CARTESIAN_POINT('',(-2.429496640897,0.43,0.2479055467));+#11270 = SURFACE_CURVE('',#11271,(#11276,#11283),.PCURVE_S1.);+#11271 = CIRCLE('',#11272,0.3);+#11272 = AXIS2_PLACEMENT_3D('',#11273,#11274,#11275);+#11273 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3));+#11274 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#11275 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#11276 = PCURVE('',#10812,#11277);+#11277 = DEFINITIONAL_REPRESENTATION('',(#11278),#11282);+#11278 = LINE('',#11279,#11280);+#11279 = CARTESIAN_POINT('',(6.28318530718,0.));+#11280 = VECTOR('',#11281,1.);+#11281 = DIRECTION('',(-1.,0.));+#11282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11283 = PCURVE('',#1975,#11284);+#11284 = DEFINITIONAL_REPRESENTATION('',(#11285),#11289);+#11285 = CIRCLE('',#11286,0.3);+#11286 = AXIS2_PLACEMENT_2D('',#11287,#11288);+#11287 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#11288 = DIRECTION('',(-0.173648177667,0.984807753012));+#11289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11290 = ORIENTED_EDGE('',*,*,#11218,.T.);+#11291 = ORIENTED_EDGE('',*,*,#10795,.F.);+#11292 = ORIENTED_EDGE('',*,*,#11293,.F.);+#11293 = EDGE_CURVE('',#11268,#10768,#11294,.T.);+#11294 = SURFACE_CURVE('',#11295,(#11299,#11306),.PCURVE_S1.);+#11295 = LINE('',#11296,#11297);+#11296 = CARTESIAN_POINT('',(-2.429496640897,0.43,0.2479055467));+#11297 = VECTOR('',#11298,1.);+#11298 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11299 = PCURVE('',#10812,#11300);+#11300 = DEFINITIONAL_REPRESENTATION('',(#11301),#11305);+#11301 = LINE('',#11302,#11303);+#11302 = CARTESIAN_POINT('',(6.28318530718,0.));+#11303 = VECTOR('',#11304,1.);+#11304 = DIRECTION('',(0.,-1.));+#11305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11306 = PCURVE('',#10783,#11307);+#11307 = DEFINITIONAL_REPRESENTATION('',(#11308),#11312);+#11308 = LINE('',#11309,#11310);+#11309 = CARTESIAN_POINT('',(0.501052433606,9.270141137704E-19));+#11310 = VECTOR('',#11311,1.);+#11311 = DIRECTION('',(5.385465771581E-30,-1.));+#11312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11313 = ADVANCED_FACE('',(#11314),#10783,.F.);+#11314 = FACE_BOUND('',#11315,.F.);+#11315 = EDGE_LOOP('',(#11316,#11339,#11340,#11341));+#11316 = ORIENTED_EDGE('',*,*,#11317,.T.);+#11317 = EDGE_CURVE('',#11318,#10735,#11320,.T.);+#11318 = VERTEX_POINT('',#11319);+#11319 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767));+#11320 = SURFACE_CURVE('',#11321,(#11325,#11332),.PCURVE_S1.);+#11321 = LINE('',#11322,#11323);+#11322 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767));+#11323 = VECTOR('',#11324,1.);+#11324 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11325 = PCURVE('',#10783,#11326);+#11326 = DEFINITIONAL_REPRESENTATION('',(#11327),#11331);+#11327 = LINE('',#11328,#11329);+#11328 = CARTESIAN_POINT('',(0.,-0.));+#11329 = VECTOR('',#11330,1.);+#11330 = DIRECTION('',(5.385465771581E-30,-1.));+#11331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11332 = PCURVE('',#10755,#11333);+#11333 = DEFINITIONAL_REPRESENTATION('',(#11334),#11338);+#11334 = LINE('',#11335,#11336);+#11335 = CARTESIAN_POINT('',(1.396263401592,0.));+#11336 = VECTOR('',#11337,1.);+#11337 = DIRECTION('',(0.,-1.));+#11338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11339 = ORIENTED_EDGE('',*,*,#10767,.T.);+#11340 = ORIENTED_EDGE('',*,*,#11293,.F.);+#11341 = ORIENTED_EDGE('',*,*,#11342,.F.);+#11342 = EDGE_CURVE('',#11318,#11268,#11343,.T.);+#11343 = SURFACE_CURVE('',#11344,(#11348,#11355),.PCURVE_S1.);+#11344 = LINE('',#11345,#11346);+#11345 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767));+#11346 = VECTOR('',#11347,1.);+#11347 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#11348 = PCURVE('',#10783,#11349);+#11349 = DEFINITIONAL_REPRESENTATION('',(#11350),#11354);+#11350 = LINE('',#11351,#11352);+#11351 = CARTESIAN_POINT('',(0.,-0.));+#11352 = VECTOR('',#11353,1.);+#11353 = DIRECTION('',(1.,5.984962792299E-34));+#11354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11355 = PCURVE('',#1975,#11356);+#11356 = DEFINITIONAL_REPRESENTATION('',(#11357),#11361);+#11357 = LINE('',#11358,#11359);+#11358 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#11359 = VECTOR('',#11360,1.);+#11360 = DIRECTION('',(-0.986841372087,-0.161691392282));+#11361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11362 = ADVANCED_FACE('',(#11363),#10755,.F.);+#11363 = FACE_BOUND('',#11364,.F.);+#11364 = EDGE_LOOP('',(#11365,#11388,#11389,#11390));+#11365 = ORIENTED_EDGE('',*,*,#11366,.T.);+#11366 = EDGE_CURVE('',#11367,#10712,#11369,.T.);+#11367 = VERTEX_POINT('',#11368);+#11368 = CARTESIAN_POINT('',(-2.25,0.43,0.825));+#11369 = SURFACE_CURVE('',#11370,(#11374,#11381),.PCURVE_S1.);+#11370 = LINE('',#11371,#11372);+#11371 = CARTESIAN_POINT('',(-2.25,0.43,0.825));+#11372 = VECTOR('',#11373,1.);+#11373 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11374 = PCURVE('',#10755,#11375);+#11375 = DEFINITIONAL_REPRESENTATION('',(#11376),#11380);+#11376 = LINE('',#11377,#11378);+#11377 = CARTESIAN_POINT('',(0.,0.));+#11378 = VECTOR('',#11379,1.);+#11379 = DIRECTION('',(0.,-1.));+#11380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11381 = PCURVE('',#362,#11382);+#11382 = DEFINITIONAL_REPRESENTATION('',(#11383),#11387);+#11383 = LINE('',#11384,#11385);+#11384 = CARTESIAN_POINT('',(0.45,5.149069853499E-18));+#11385 = VECTOR('',#11386,1.);+#11386 = DIRECTION('',(0.,-1.));+#11387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11388 = ORIENTED_EDGE('',*,*,#10734,.T.);+#11389 = ORIENTED_EDGE('',*,*,#11317,.F.);+#11390 = ORIENTED_EDGE('',*,*,#11391,.F.);+#11391 = EDGE_CURVE('',#11367,#11318,#11392,.T.);+#11392 = SURFACE_CURVE('',#11393,(#11398,#11405),.PCURVE_S1.);+#11393 = CIRCLE('',#11394,0.1);+#11394 = AXIS2_PLACEMENT_3D('',#11395,#11396,#11397);+#11395 = CARTESIAN_POINT('',(-2.25,0.43,0.725));+#11396 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#11397 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#11398 = PCURVE('',#10755,#11399);+#11399 = DEFINITIONAL_REPRESENTATION('',(#11400),#11404);+#11400 = LINE('',#11401,#11402);+#11401 = CARTESIAN_POINT('',(0.,0.));+#11402 = VECTOR('',#11403,1.);+#11403 = DIRECTION('',(1.,0.));+#11404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11405 = PCURVE('',#1975,#11406);+#11406 = DEFINITIONAL_REPRESENTATION('',(#11407),#11415);+#11407 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11408,#11409,#11410,#11411+ ,#11412,#11413,#11414),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11408 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#11409 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#11410 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#11411 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#11412 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#11413 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#11414 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#11415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11416 = ADVANCED_FACE('',(#11417),#2003,.T.);+#11417 = FACE_BOUND('',#11418,.T.);+#11418 = EDGE_LOOP('',(#11419,#11441,#11442,#11443));+#11419 = ORIENTED_EDGE('',*,*,#11420,.T.);+#11420 = EDGE_CURVE('',#11020,#1960,#11421,.T.);+#11421 = SURFACE_CURVE('',#11422,(#11427,#11434),.PCURVE_S1.);+#11422 = CIRCLE('',#11423,0.3);+#11423 = AXIS2_PLACEMENT_3D('',#11424,#11425,#11426);+#11424 = CARTESIAN_POINT('',(-2.25,0.43,0.725));+#11425 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#11426 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#11427 = PCURVE('',#2003,#11428);+#11428 = DEFINITIONAL_REPRESENTATION('',(#11429),#11433);+#11429 = LINE('',#11430,#11431);+#11430 = CARTESIAN_POINT('',(6.28318530718,5.551115123126E-17));+#11431 = VECTOR('',#11432,1.);+#11432 = DIRECTION('',(-1.,-3.97569335183E-17));+#11433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11434 = PCURVE('',#1975,#11435);+#11435 = DEFINITIONAL_REPRESENTATION('',(#11436),#11440);+#11436 = CIRCLE('',#11437,0.3);+#11437 = AXIS2_PLACEMENT_2D('',#11438,#11439);+#11438 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#11439 = DIRECTION('',(0.173648177667,-0.984807753012));+#11440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11441 = ORIENTED_EDGE('',*,*,#1987,.T.);+#11442 = ORIENTED_EDGE('',*,*,#10969,.F.);+#11443 = ORIENTED_EDGE('',*,*,#11019,.F.);+#11444 = ADVANCED_FACE('',(#11445),#1975,.F.);+#11445 = FACE_BOUND('',#11446,.F.);+#11446 = EDGE_LOOP('',(#11447,#11468,#11489,#11490,#11491,#11492,#11493,+ #11494,#11495,#11496,#11497,#11498));+#11447 = ORIENTED_EDGE('',*,*,#11448,.F.);+#11448 = EDGE_CURVE('',#347,#1937,#11449,.T.);+#11449 = SURFACE_CURVE('',#11450,(#11454,#11461),.PCURVE_S1.);+#11450 = LINE('',#11451,#11452);+#11451 = CARTESIAN_POINT('',(-1.95,0.43,0.786976568901));+#11452 = VECTOR('',#11453,1.);+#11453 = DIRECTION('',(0.,0.,1.));+#11454 = PCURVE('',#1975,#11455);+#11455 = DEFINITIONAL_REPRESENTATION('',(#11456),#11460);+#11456 = LINE('',#11457,#11458);+#11457 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#11458 = VECTOR('',#11459,1.);+#11459 = DIRECTION('',(1.,0.));+#11460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11461 = PCURVE('',#390,#11462);+#11462 = DEFINITIONAL_REPRESENTATION('',(#11463),#11467);+#11463 = LINE('',#11464,#11465);+#11464 = CARTESIAN_POINT('',(2.705,-0.238023431099));+#11465 = VECTOR('',#11466,1.);+#11466 = DIRECTION('',(0.,1.));+#11467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11468 = ORIENTED_EDGE('',*,*,#11469,.T.);+#11469 = EDGE_CURVE('',#347,#11367,#11470,.T.);+#11470 = SURFACE_CURVE('',#11471,(#11475,#11482),.PCURVE_S1.);+#11471 = LINE('',#11472,#11473);+#11472 = CARTESIAN_POINT('',(-1.8,0.43,0.825));+#11473 = VECTOR('',#11474,1.);+#11474 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#11475 = PCURVE('',#1975,#11476);+#11476 = DEFINITIONAL_REPRESENTATION('',(#11477),#11481);+#11477 = LINE('',#11478,#11479);+#11478 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#11479 = VECTOR('',#11480,1.);+#11480 = DIRECTION('',(0.,-1.));+#11481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11482 = PCURVE('',#362,#11483);+#11483 = DEFINITIONAL_REPRESENTATION('',(#11484),#11488);+#11484 = LINE('',#11485,#11486);+#11485 = CARTESIAN_POINT('',(0.,0.));+#11486 = VECTOR('',#11487,1.);+#11487 = DIRECTION('',(1.,0.));+#11488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11489 = ORIENTED_EDGE('',*,*,#11391,.T.);+#11490 = ORIENTED_EDGE('',*,*,#11342,.T.);+#11491 = ORIENTED_EDGE('',*,*,#11267,.T.);+#11492 = ORIENTED_EDGE('',*,*,#11243,.T.);+#11493 = ORIENTED_EDGE('',*,*,#11194,.T.);+#11494 = ORIENTED_EDGE('',*,*,#11145,.T.);+#11495 = ORIENTED_EDGE('',*,*,#11091,.T.);+#11496 = ORIENTED_EDGE('',*,*,#11042,.T.);+#11497 = ORIENTED_EDGE('',*,*,#11420,.T.);+#11498 = ORIENTED_EDGE('',*,*,#1959,.T.);+#11499 = ADVANCED_FACE('',(#11500),#1924,.T.);+#11500 = FACE_BOUND('',#11501,.T.);+#11501 = EDGE_LOOP('',(#11502,#11523,#11546,#11579,#11607,#11636,#11664,+ #11692,#11720,#11753,#11781,#11803));+#11502 = ORIENTED_EDGE('',*,*,#11503,.F.);+#11503 = EDGE_CURVE('',#375,#1909,#11504,.T.);+#11504 = SURFACE_CURVE('',#11505,(#11509,#11516),.PCURVE_S1.);+#11505 = LINE('',#11506,#11507);+#11506 = CARTESIAN_POINT('',(-1.95,-0.43,0.786976568901));+#11507 = VECTOR('',#11508,1.);+#11508 = DIRECTION('',(0.,0.,1.));+#11509 = PCURVE('',#1924,#11510);+#11510 = DEFINITIONAL_REPRESENTATION('',(#11511),#11515);+#11511 = LINE('',#11512,#11513);+#11512 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#11513 = VECTOR('',#11514,1.);+#11514 = DIRECTION('',(1.,0.));+#11515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11516 = PCURVE('',#390,#11517);+#11517 = DEFINITIONAL_REPRESENTATION('',(#11518),#11522);+#11518 = LINE('',#11519,#11520);+#11519 = CARTESIAN_POINT('',(1.845,-0.238023431099));+#11520 = VECTOR('',#11521,1.);+#11521 = DIRECTION('',(0.,1.));+#11522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11523 = ORIENTED_EDGE('',*,*,#11524,.T.);+#11524 = EDGE_CURVE('',#375,#11525,#11527,.T.);+#11525 = VERTEX_POINT('',#11526);+#11526 = CARTESIAN_POINT('',(-2.25,-0.43,0.825));+#11527 = SURFACE_CURVE('',#11528,(#11532,#11539),.PCURVE_S1.);+#11528 = LINE('',#11529,#11530);+#11529 = CARTESIAN_POINT('',(-1.8,-0.43,0.825));+#11530 = VECTOR('',#11531,1.);+#11531 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#11532 = PCURVE('',#1924,#11533);+#11533 = DEFINITIONAL_REPRESENTATION('',(#11534),#11538);+#11534 = LINE('',#11535,#11536);+#11535 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#11536 = VECTOR('',#11537,1.);+#11537 = DIRECTION('',(0.,-1.));+#11538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11539 = PCURVE('',#418,#11540);+#11540 = DEFINITIONAL_REPRESENTATION('',(#11541),#11545);+#11541 = LINE('',#11542,#11543);+#11542 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#11543 = VECTOR('',#11544,1.);+#11544 = DIRECTION('',(1.,0.));+#11545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11546 = ORIENTED_EDGE('',*,*,#11547,.T.);+#11547 = EDGE_CURVE('',#11525,#11548,#11550,.T.);+#11548 = VERTEX_POINT('',#11549);+#11549 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.742364817767));+#11550 = SURFACE_CURVE('',#11551,(#11556,#11567),.PCURVE_S1.);+#11551 = CIRCLE('',#11552,0.1);+#11552 = AXIS2_PLACEMENT_3D('',#11553,#11554,#11555);+#11553 = CARTESIAN_POINT('',(-2.25,-0.43,0.725));+#11554 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#11555 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#11556 = PCURVE('',#1924,#11557);+#11557 = DEFINITIONAL_REPRESENTATION('',(#11558),#11566);+#11558 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11559,#11560,#11561,#11562+ ,#11563,#11564,#11565),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11559 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#11560 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#11561 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#11562 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#11563 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#11564 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#11565 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#11566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11567 = PCURVE('',#11568,#11573);+#11568 = CYLINDRICAL_SURFACE('',#11569,0.1);+#11569 = AXIS2_PLACEMENT_3D('',#11570,#11571,#11572);+#11570 = CARTESIAN_POINT('',(-2.25,-0.84,0.725));+#11571 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#11572 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#11573 = DEFINITIONAL_REPRESENTATION('',(#11574),#11578);+#11574 = LINE('',#11575,#11576);+#11575 = CARTESIAN_POINT('',(0.,-0.41));+#11576 = VECTOR('',#11577,1.);+#11577 = DIRECTION('',(1.,0.));+#11578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11579 = ORIENTED_EDGE('',*,*,#11580,.T.);+#11580 = EDGE_CURVE('',#11548,#11581,#11583,.T.);+#11581 = VERTEX_POINT('',#11582);+#11582 = CARTESIAN_POINT('',(-2.429496640897,-0.43,0.2479055467));+#11583 = SURFACE_CURVE('',#11584,(#11588,#11595),.PCURVE_S1.);+#11584 = LINE('',#11585,#11586);+#11585 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.742364817767));+#11586 = VECTOR('',#11587,1.);+#11587 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#11588 = PCURVE('',#1924,#11589);+#11589 = DEFINITIONAL_REPRESENTATION('',(#11590),#11594);+#11590 = LINE('',#11591,#11592);+#11591 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#11592 = VECTOR('',#11593,1.);+#11593 = DIRECTION('',(-0.986841372087,-0.161691392282));+#11594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11595 = PCURVE('',#11596,#11601);+#11596 = PLANE('',#11597);+#11597 = AXIS2_PLACEMENT_3D('',#11598,#11599,#11600);+#11598 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767));+#11599 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282+ ));+#11600 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#11601 = DEFINITIONAL_REPRESENTATION('',(#11602),#11606);+#11602 = LINE('',#11603,#11604);+#11603 = CARTESIAN_POINT('',(7.585549159209E-19,-0.41));+#11604 = VECTOR('',#11605,1.);+#11605 = DIRECTION('',(1.,5.984962792299E-34));+#11606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11607 = ORIENTED_EDGE('',*,*,#11608,.T.);+#11608 = EDGE_CURVE('',#11581,#11609,#11611,.T.);+#11609 = VERTEX_POINT('',#11610);+#11610 = CARTESIAN_POINT('',(-2.724938966801,-0.43,-1.665334536938E-16)+ );+#11611 = SURFACE_CURVE('',#11612,(#11617,#11624),.PCURVE_S1.);+#11612 = CIRCLE('',#11613,0.3);+#11613 = AXIS2_PLACEMENT_3D('',#11614,#11615,#11616);+#11614 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.3));+#11615 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#11616 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#11617 = PCURVE('',#1924,#11618);+#11618 = DEFINITIONAL_REPRESENTATION('',(#11619),#11623);+#11619 = CIRCLE('',#11620,0.3);+#11620 = AXIS2_PLACEMENT_2D('',#11621,#11622);+#11621 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#11622 = DIRECTION('',(-0.173648177667,0.984807753012));+#11623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11624 = PCURVE('',#11625,#11630);+#11625 = CYLINDRICAL_SURFACE('',#11626,0.3);+#11626 = AXIS2_PLACEMENT_3D('',#11627,#11628,#11629);+#11627 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3));+#11628 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#11629 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#11630 = DEFINITIONAL_REPRESENTATION('',(#11631),#11635);+#11631 = LINE('',#11632,#11633);+#11632 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#11633 = VECTOR('',#11634,1.);+#11634 = DIRECTION('',(-1.,0.));+#11635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11636 = ORIENTED_EDGE('',*,*,#11637,.T.);+#11637 = EDGE_CURVE('',#11609,#11638,#11640,.T.);+#11638 = VERTEX_POINT('',#11639);+#11639 = CARTESIAN_POINT('',(-3.,-0.43,-1.665334536938E-16));+#11640 = SURFACE_CURVE('',#11641,(#11645,#11652),.PCURVE_S1.);+#11641 = LINE('',#11642,#11643);+#11642 = CARTESIAN_POINT('',(-2.724938966801,-0.43,-1.665334536938E-16)+ );+#11643 = VECTOR('',#11644,1.);+#11644 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#11645 = PCURVE('',#1924,#11646);+#11646 = DEFINITIONAL_REPRESENTATION('',(#11647),#11651);+#11647 = LINE('',#11648,#11649);+#11648 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#11649 = VECTOR('',#11650,1.);+#11650 = DIRECTION('',(0.,-1.));+#11651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11652 = PCURVE('',#11653,#11658);+#11653 = PLANE('',#11654);+#11654 = AXIS2_PLACEMENT_3D('',#11655,#11656,#11657);+#11655 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16)+ );+#11656 = DIRECTION('',(0.,0.,1.));+#11657 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#11658 = DEFINITIONAL_REPRESENTATION('',(#11659),#11663);+#11659 = LINE('',#11660,#11661);+#11660 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#11661 = VECTOR('',#11662,1.);+#11662 = DIRECTION('',(1.,0.));+#11663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11664 = ORIENTED_EDGE('',*,*,#11665,.T.);+#11665 = EDGE_CURVE('',#11638,#11666,#11668,.T.);+#11666 = VERTEX_POINT('',#11667);+#11667 = CARTESIAN_POINT('',(-3.,-0.43,0.2));+#11668 = SURFACE_CURVE('',#11669,(#11673,#11680),.PCURVE_S1.);+#11669 = LINE('',#11670,#11671);+#11670 = CARTESIAN_POINT('',(-3.,-0.43,-1.665334536938E-16));+#11671 = VECTOR('',#11672,1.);+#11672 = DIRECTION('',(0.,0.,1.));+#11673 = PCURVE('',#1924,#11674);+#11674 = DEFINITIONAL_REPRESENTATION('',(#11675),#11679);+#11675 = LINE('',#11676,#11677);+#11676 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#11677 = VECTOR('',#11678,1.);+#11678 = DIRECTION('',(1.,0.));+#11679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11680 = PCURVE('',#11681,#11686);+#11681 = PLANE('',#11682);+#11682 = AXIS2_PLACEMENT_3D('',#11683,#11684,#11685);+#11683 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16));+#11684 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#11685 = DIRECTION('',(0.,0.,1.));+#11686 = DEFINITIONAL_REPRESENTATION('',(#11687),#11691);+#11687 = LINE('',#11688,#11689);+#11688 = CARTESIAN_POINT('',(0.,-0.41));+#11689 = VECTOR('',#11690,1.);+#11690 = DIRECTION('',(1.,0.));+#11691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11692 = ORIENTED_EDGE('',*,*,#11693,.T.);+#11693 = EDGE_CURVE('',#11666,#11694,#11696,.T.);+#11694 = VERTEX_POINT('',#11695);+#11695 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.2));+#11696 = SURFACE_CURVE('',#11697,(#11701,#11708),.PCURVE_S1.);+#11697 = LINE('',#11698,#11699);+#11698 = CARTESIAN_POINT('',(-3.,-0.43,0.2));+#11699 = VECTOR('',#11700,1.);+#11700 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#11701 = PCURVE('',#1924,#11702);+#11702 = DEFINITIONAL_REPRESENTATION('',(#11703),#11707);+#11703 = LINE('',#11704,#11705);+#11704 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#11705 = VECTOR('',#11706,1.);+#11706 = DIRECTION('',(0.,1.));+#11707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11708 = PCURVE('',#11709,#11714);+#11709 = PLANE('',#11710);+#11710 = AXIS2_PLACEMENT_3D('',#11711,#11712,#11713);+#11711 = CARTESIAN_POINT('',(-3.,-0.84,0.2));+#11712 = DIRECTION('',(0.,0.,-1.));+#11713 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#11714 = DEFINITIONAL_REPRESENTATION('',(#11715),#11719);+#11715 = LINE('',#11716,#11717);+#11716 = CARTESIAN_POINT('',(-4.69137475541E-18,-0.41));+#11717 = VECTOR('',#11718,1.);+#11718 = DIRECTION('',(1.,0.));+#11719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11720 = ORIENTED_EDGE('',*,*,#11721,.T.);+#11721 = EDGE_CURVE('',#11694,#11722,#11724,.T.);+#11722 = VERTEX_POINT('',#11723);+#11723 = CARTESIAN_POINT('',(-2.6264581915,-0.43,0.282635182233));+#11724 = SURFACE_CURVE('',#11725,(#11730,#11741),.PCURVE_S1.);+#11725 = CIRCLE('',#11726,0.1);+#11726 = AXIS2_PLACEMENT_3D('',#11727,#11728,#11729);+#11727 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.3));+#11728 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#11729 = DIRECTION('',(0.,0.,-1.));+#11730 = PCURVE('',#1924,#11731);+#11731 = DEFINITIONAL_REPRESENTATION('',(#11732),#11740);+#11732 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11733,#11734,#11735,#11736+ ,#11737,#11738,#11739),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11733 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#11734 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#11735 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#11736 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#11737 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#11738 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#11739 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#11740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11741 = PCURVE('',#11742,#11747);+#11742 = CYLINDRICAL_SURFACE('',#11743,0.1);+#11743 = AXIS2_PLACEMENT_3D('',#11744,#11745,#11746);+#11744 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3));+#11745 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#11746 = DIRECTION('',(-0.,0.,-1.));+#11747 = DEFINITIONAL_REPRESENTATION('',(#11748),#11752);+#11748 = LINE('',#11749,#11750);+#11749 = CARTESIAN_POINT('',(0.,-0.41));+#11750 = VECTOR('',#11751,1.);+#11751 = DIRECTION('',(1.,0.));+#11752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11753 = ORIENTED_EDGE('',*,*,#11754,.T.);+#11754 = EDGE_CURVE('',#11722,#11755,#11757,.T.);+#11755 = VERTEX_POINT('',#11756);+#11756 = CARTESIAN_POINT('',(-2.545442325904,-0.43,0.7770944533));+#11757 = SURFACE_CURVE('',#11758,(#11762,#11769),.PCURVE_S1.);+#11758 = LINE('',#11759,#11760);+#11759 = CARTESIAN_POINT('',(-2.6264581915,-0.43,0.282635182233));+#11760 = VECTOR('',#11761,1.);+#11761 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#11762 = PCURVE('',#1924,#11763);+#11763 = DEFINITIONAL_REPRESENTATION('',(#11764),#11768);+#11764 = LINE('',#11765,#11766);+#11765 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#11766 = VECTOR('',#11767,1.);+#11767 = DIRECTION('',(0.986841372087,0.161691392282));+#11768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11769 = PCURVE('',#11770,#11775);+#11770 = PLANE('',#11771);+#11771 = AXIS2_PLACEMENT_3D('',#11772,#11773,#11774);+#11772 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233));+#11773 = DIRECTION('',(0.986841372087,-1.129181146488E-17,+ -0.161691392282));+#11774 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#11775 = DEFINITIONAL_REPRESENTATION('',(#11776),#11780);+#11776 = LINE('',#11777,#11778);+#11777 = CARTESIAN_POINT('',(-7.585549159209E-19,-0.41));+#11778 = VECTOR('',#11779,1.);+#11779 = DIRECTION('',(1.,-5.984962792299E-34));+#11780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11781 = ORIENTED_EDGE('',*,*,#11782,.T.);+#11782 = EDGE_CURVE('',#11755,#1881,#11783,.T.);+#11783 = SURFACE_CURVE('',#11784,(#11789,#11796),.PCURVE_S1.);+#11784 = CIRCLE('',#11785,0.3);+#11785 = AXIS2_PLACEMENT_3D('',#11786,#11787,#11788);+#11786 = CARTESIAN_POINT('',(-2.25,-0.43,0.725));+#11787 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#11788 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#11789 = PCURVE('',#1924,#11790);+#11790 = DEFINITIONAL_REPRESENTATION('',(#11791),#11795);+#11791 = CIRCLE('',#11792,0.3);+#11792 = AXIS2_PLACEMENT_2D('',#11793,#11794);+#11793 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#11794 = DIRECTION('',(0.173648177667,-0.984807753012));+#11795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11796 = PCURVE('',#1896,#11797);+#11797 = DEFINITIONAL_REPRESENTATION('',(#11798),#11802);+#11798 = LINE('',#11799,#11800);+#11799 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#11800 = VECTOR('',#11801,1.);+#11801 = DIRECTION('',(-1.,-3.97569335183E-17));+#11802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11803 = ORIENTED_EDGE('',*,*,#1908,.T.);+#11804 = ADVANCED_FACE('',(#11805),#11770,.F.);+#11805 = FACE_BOUND('',#11806,.F.);+#11806 = EDGE_LOOP('',(#11807,#11830,#11831,#11854));+#11807 = ORIENTED_EDGE('',*,*,#11808,.T.);+#11808 = EDGE_CURVE('',#11809,#11722,#11811,.T.);+#11809 = VERTEX_POINT('',#11810);+#11810 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233));+#11811 = SURFACE_CURVE('',#11812,(#11816,#11823),.PCURVE_S1.);+#11812 = LINE('',#11813,#11814);+#11813 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233));+#11814 = VECTOR('',#11815,1.);+#11815 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11816 = PCURVE('',#11770,#11817);+#11817 = DEFINITIONAL_REPRESENTATION('',(#11818),#11822);+#11818 = LINE('',#11819,#11820);+#11819 = CARTESIAN_POINT('',(0.,-0.));+#11820 = VECTOR('',#11821,1.);+#11821 = DIRECTION('',(-5.385465771581E-30,-1.));+#11822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11823 = PCURVE('',#11742,#11824);+#11824 = DEFINITIONAL_REPRESENTATION('',(#11825),#11829);+#11825 = LINE('',#11826,#11827);+#11826 = CARTESIAN_POINT('',(1.396263401592,0.));+#11827 = VECTOR('',#11828,1.);+#11828 = DIRECTION('',(0.,-1.));+#11829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11830 = ORIENTED_EDGE('',*,*,#11754,.T.);+#11831 = ORIENTED_EDGE('',*,*,#11832,.F.);+#11832 = EDGE_CURVE('',#11833,#11755,#11835,.T.);+#11833 = VERTEX_POINT('',#11834);+#11834 = CARTESIAN_POINT('',(-2.545442325904,-0.84,0.7770944533));+#11835 = SURFACE_CURVE('',#11836,(#11840,#11847),.PCURVE_S1.);+#11836 = LINE('',#11837,#11838);+#11837 = CARTESIAN_POINT('',(-2.545442325904,-0.84,0.7770944533));+#11838 = VECTOR('',#11839,1.);+#11839 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11840 = PCURVE('',#11770,#11841);+#11841 = DEFINITIONAL_REPRESENTATION('',(#11842),#11846);+#11842 = LINE('',#11843,#11844);+#11843 = CARTESIAN_POINT('',(0.501052433606,-9.270141137704E-19));+#11844 = VECTOR('',#11845,1.);+#11845 = DIRECTION('',(-5.385465771581E-30,-1.));+#11846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11847 = PCURVE('',#1896,#11848);+#11848 = DEFINITIONAL_REPRESENTATION('',(#11849),#11853);+#11849 = LINE('',#11850,#11851);+#11850 = CARTESIAN_POINT('',(6.28318530718,0.));+#11851 = VECTOR('',#11852,1.);+#11852 = DIRECTION('',(0.,-1.));+#11853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11854 = ORIENTED_EDGE('',*,*,#11855,.F.);+#11855 = EDGE_CURVE('',#11809,#11833,#11856,.T.);+#11856 = SURFACE_CURVE('',#11857,(#11861,#11868),.PCURVE_S1.);+#11857 = LINE('',#11858,#11859);+#11858 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233));+#11859 = VECTOR('',#11860,1.);+#11860 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#11861 = PCURVE('',#11770,#11862);+#11862 = DEFINITIONAL_REPRESENTATION('',(#11863),#11867);+#11863 = LINE('',#11864,#11865);+#11864 = CARTESIAN_POINT('',(0.,-0.));+#11865 = VECTOR('',#11866,1.);+#11866 = DIRECTION('',(1.,-5.984962792299E-34));+#11867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11868 = PCURVE('',#1868,#11869);+#11869 = DEFINITIONAL_REPRESENTATION('',(#11870),#11874);+#11870 = LINE('',#11871,#11872);+#11871 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#11872 = VECTOR('',#11873,1.);+#11873 = DIRECTION('',(0.986841372087,0.161691392282));+#11874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11875 = ADVANCED_FACE('',(#11876),#11742,.F.);+#11876 = FACE_BOUND('',#11877,.F.);+#11877 = EDGE_LOOP('',(#11878,#11901,#11902,#11903));+#11878 = ORIENTED_EDGE('',*,*,#11879,.T.);+#11879 = EDGE_CURVE('',#11880,#11694,#11882,.T.);+#11880 = VERTEX_POINT('',#11881);+#11881 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.2));+#11882 = SURFACE_CURVE('',#11883,(#11887,#11894),.PCURVE_S1.);+#11883 = LINE('',#11884,#11885);+#11884 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.2));+#11885 = VECTOR('',#11886,1.);+#11886 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11887 = PCURVE('',#11742,#11888);+#11888 = DEFINITIONAL_REPRESENTATION('',(#11889),#11893);+#11889 = LINE('',#11890,#11891);+#11890 = CARTESIAN_POINT('',(0.,0.));+#11891 = VECTOR('',#11892,1.);+#11892 = DIRECTION('',(0.,-1.));+#11893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11894 = PCURVE('',#11709,#11895);+#11895 = DEFINITIONAL_REPRESENTATION('',(#11896),#11900);+#11896 = LINE('',#11897,#11898);+#11897 = CARTESIAN_POINT('',(0.275061033199,-3.147352164261E-18));+#11898 = VECTOR('',#11899,1.);+#11899 = DIRECTION('',(0.,-1.));+#11900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11901 = ORIENTED_EDGE('',*,*,#11721,.T.);+#11902 = ORIENTED_EDGE('',*,*,#11808,.F.);+#11903 = ORIENTED_EDGE('',*,*,#11904,.F.);+#11904 = EDGE_CURVE('',#11880,#11809,#11905,.T.);+#11905 = SURFACE_CURVE('',#11906,(#11911,#11918),.PCURVE_S1.);+#11906 = CIRCLE('',#11907,0.1);+#11907 = AXIS2_PLACEMENT_3D('',#11908,#11909,#11910);+#11908 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3));+#11909 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#11910 = DIRECTION('',(0.,0.,-1.));+#11911 = PCURVE('',#11742,#11912);+#11912 = DEFINITIONAL_REPRESENTATION('',(#11913),#11917);+#11913 = LINE('',#11914,#11915);+#11914 = CARTESIAN_POINT('',(0.,0.));+#11915 = VECTOR('',#11916,1.);+#11916 = DIRECTION('',(1.,0.));+#11917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11918 = PCURVE('',#1868,#11919);+#11919 = DEFINITIONAL_REPRESENTATION('',(#11920),#11928);+#11920 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11921,#11922,#11923,#11924+ ,#11925,#11926,#11927),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11921 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#11922 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#11923 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#11924 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#11925 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#11926 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#11927 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#11928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11929 = ADVANCED_FACE('',(#11930),#11709,.F.);+#11930 = FACE_BOUND('',#11931,.F.);+#11931 = EDGE_LOOP('',(#11932,#11955,#11956,#11957));+#11932 = ORIENTED_EDGE('',*,*,#11933,.T.);+#11933 = EDGE_CURVE('',#11934,#11666,#11936,.T.);+#11934 = VERTEX_POINT('',#11935);+#11935 = CARTESIAN_POINT('',(-3.,-0.84,0.2));+#11936 = SURFACE_CURVE('',#11937,(#11941,#11948),.PCURVE_S1.);+#11937 = LINE('',#11938,#11939);+#11938 = CARTESIAN_POINT('',(-3.,-0.84,0.2));+#11939 = VECTOR('',#11940,1.);+#11940 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11941 = PCURVE('',#11709,#11942);+#11942 = DEFINITIONAL_REPRESENTATION('',(#11943),#11947);+#11943 = LINE('',#11944,#11945);+#11944 = CARTESIAN_POINT('',(0.,-0.));+#11945 = VECTOR('',#11946,1.);+#11946 = DIRECTION('',(0.,-1.));+#11947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11948 = PCURVE('',#11681,#11949);+#11949 = DEFINITIONAL_REPRESENTATION('',(#11950),#11954);+#11950 = LINE('',#11951,#11952);+#11951 = CARTESIAN_POINT('',(0.2,0.));+#11952 = VECTOR('',#11953,1.);+#11953 = DIRECTION('',(0.,-1.));+#11954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11955 = ORIENTED_EDGE('',*,*,#11693,.T.);+#11956 = ORIENTED_EDGE('',*,*,#11879,.F.);+#11957 = ORIENTED_EDGE('',*,*,#11958,.F.);+#11958 = EDGE_CURVE('',#11934,#11880,#11959,.T.);+#11959 = SURFACE_CURVE('',#11960,(#11964,#11971),.PCURVE_S1.);+#11960 = LINE('',#11961,#11962);+#11961 = CARTESIAN_POINT('',(-3.,-0.84,0.2));+#11962 = VECTOR('',#11963,1.);+#11963 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#11964 = PCURVE('',#11709,#11965);+#11965 = DEFINITIONAL_REPRESENTATION('',(#11966),#11970);+#11966 = LINE('',#11967,#11968);+#11967 = CARTESIAN_POINT('',(0.,-0.));+#11968 = VECTOR('',#11969,1.);+#11969 = DIRECTION('',(1.,0.));+#11970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11971 = PCURVE('',#1868,#11972);+#11972 = DEFINITIONAL_REPRESENTATION('',(#11973),#11977);+#11973 = LINE('',#11974,#11975);+#11974 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#11975 = VECTOR('',#11976,1.);+#11976 = DIRECTION('',(0.,1.));+#11977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11978 = ADVANCED_FACE('',(#11979),#11681,.F.);+#11979 = FACE_BOUND('',#11980,.F.);+#11980 = EDGE_LOOP('',(#11981,#12004,#12005,#12006));+#11981 = ORIENTED_EDGE('',*,*,#11982,.T.);+#11982 = EDGE_CURVE('',#11983,#11638,#11985,.T.);+#11983 = VERTEX_POINT('',#11984);+#11984 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16));+#11985 = SURFACE_CURVE('',#11986,(#11990,#11997),.PCURVE_S1.);+#11986 = LINE('',#11987,#11988);+#11987 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16));+#11988 = VECTOR('',#11989,1.);+#11989 = DIRECTION('',(1.144237745222E-17,1.,0.));+#11990 = PCURVE('',#11681,#11991);+#11991 = DEFINITIONAL_REPRESENTATION('',(#11992),#11996);+#11992 = LINE('',#11993,#11994);+#11993 = CARTESIAN_POINT('',(0.,0.));+#11994 = VECTOR('',#11995,1.);+#11995 = DIRECTION('',(0.,-1.));+#11996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11997 = PCURVE('',#11653,#11998);+#11998 = DEFINITIONAL_REPRESENTATION('',(#11999),#12003);+#11999 = LINE('',#12000,#12001);+#12000 = CARTESIAN_POINT('',(0.275061033199,3.147352164261E-18));+#12001 = VECTOR('',#12002,1.);+#12002 = DIRECTION('',(0.,-1.));+#12003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12004 = ORIENTED_EDGE('',*,*,#11665,.T.);+#12005 = ORIENTED_EDGE('',*,*,#11933,.F.);+#12006 = ORIENTED_EDGE('',*,*,#12007,.F.);+#12007 = EDGE_CURVE('',#11983,#11934,#12008,.T.);+#12008 = SURFACE_CURVE('',#12009,(#12013,#12020),.PCURVE_S1.);+#12009 = LINE('',#12010,#12011);+#12010 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16));+#12011 = VECTOR('',#12012,1.);+#12012 = DIRECTION('',(0.,0.,1.));+#12013 = PCURVE('',#11681,#12014);+#12014 = DEFINITIONAL_REPRESENTATION('',(#12015),#12019);+#12015 = LINE('',#12016,#12017);+#12016 = CARTESIAN_POINT('',(0.,0.));+#12017 = VECTOR('',#12018,1.);+#12018 = DIRECTION('',(1.,0.));+#12019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12020 = PCURVE('',#1868,#12021);+#12021 = DEFINITIONAL_REPRESENTATION('',(#12022),#12026);+#12022 = LINE('',#12023,#12024);+#12023 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#12024 = VECTOR('',#12025,1.);+#12025 = DIRECTION('',(1.,0.));+#12026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12027 = ADVANCED_FACE('',(#12028),#11653,.F.);+#12028 = FACE_BOUND('',#12029,.F.);+#12029 = EDGE_LOOP('',(#12030,#12053,#12054,#12055));+#12030 = ORIENTED_EDGE('',*,*,#12031,.T.);+#12031 = EDGE_CURVE('',#12032,#11609,#12034,.T.);+#12032 = VERTEX_POINT('',#12033);+#12033 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16)+ );+#12034 = SURFACE_CURVE('',#12035,(#12039,#12046),.PCURVE_S1.);+#12035 = LINE('',#12036,#12037);+#12036 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16)+ );+#12037 = VECTOR('',#12038,1.);+#12038 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12039 = PCURVE('',#11653,#12040);+#12040 = DEFINITIONAL_REPRESENTATION('',(#12041),#12045);+#12041 = LINE('',#12042,#12043);+#12042 = CARTESIAN_POINT('',(0.,0.));+#12043 = VECTOR('',#12044,1.);+#12044 = DIRECTION('',(0.,-1.));+#12045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12046 = PCURVE('',#11625,#12047);+#12047 = DEFINITIONAL_REPRESENTATION('',(#12048),#12052);+#12048 = LINE('',#12049,#12050);+#12049 = CARTESIAN_POINT('',(4.886921905584,0.));+#12050 = VECTOR('',#12051,1.);+#12051 = DIRECTION('',(0.,-1.));+#12052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12053 = ORIENTED_EDGE('',*,*,#11637,.T.);+#12054 = ORIENTED_EDGE('',*,*,#11982,.F.);+#12055 = ORIENTED_EDGE('',*,*,#12056,.F.);+#12056 = EDGE_CURVE('',#12032,#11983,#12057,.T.);+#12057 = SURFACE_CURVE('',#12058,(#12062,#12069),.PCURVE_S1.);+#12058 = LINE('',#12059,#12060);+#12059 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16)+ );+#12060 = VECTOR('',#12061,1.);+#12061 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#12062 = PCURVE('',#11653,#12063);+#12063 = DEFINITIONAL_REPRESENTATION('',(#12064),#12068);+#12064 = LINE('',#12065,#12066);+#12065 = CARTESIAN_POINT('',(0.,0.));+#12066 = VECTOR('',#12067,1.);+#12067 = DIRECTION('',(1.,0.));+#12068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12069 = PCURVE('',#1868,#12070);+#12070 = DEFINITIONAL_REPRESENTATION('',(#12071),#12075);+#12071 = LINE('',#12072,#12073);+#12072 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#12073 = VECTOR('',#12074,1.);+#12074 = DIRECTION('',(0.,-1.));+#12075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12076 = ADVANCED_FACE('',(#12077),#11625,.T.);+#12077 = FACE_BOUND('',#12078,.T.);+#12078 = EDGE_LOOP('',(#12079,#12103,#12104,#12105));+#12079 = ORIENTED_EDGE('',*,*,#12080,.T.);+#12080 = EDGE_CURVE('',#12081,#12032,#12083,.T.);+#12081 = VERTEX_POINT('',#12082);+#12082 = CARTESIAN_POINT('',(-2.429496640897,-0.84,0.2479055467));+#12083 = SURFACE_CURVE('',#12084,(#12089,#12096),.PCURVE_S1.);+#12084 = CIRCLE('',#12085,0.3);+#12085 = AXIS2_PLACEMENT_3D('',#12086,#12087,#12088);+#12086 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3));+#12087 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#12088 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#12089 = PCURVE('',#11625,#12090);+#12090 = DEFINITIONAL_REPRESENTATION('',(#12091),#12095);+#12091 = LINE('',#12092,#12093);+#12092 = CARTESIAN_POINT('',(6.28318530718,0.));+#12093 = VECTOR('',#12094,1.);+#12094 = DIRECTION('',(-1.,0.));+#12095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12096 = PCURVE('',#1868,#12097);+#12097 = DEFINITIONAL_REPRESENTATION('',(#12098),#12102);+#12098 = CIRCLE('',#12099,0.3);+#12099 = AXIS2_PLACEMENT_2D('',#12100,#12101);+#12100 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#12101 = DIRECTION('',(-0.173648177667,0.984807753012));+#12102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12103 = ORIENTED_EDGE('',*,*,#12031,.T.);+#12104 = ORIENTED_EDGE('',*,*,#11608,.F.);+#12105 = ORIENTED_EDGE('',*,*,#12106,.F.);+#12106 = EDGE_CURVE('',#12081,#11581,#12107,.T.);+#12107 = SURFACE_CURVE('',#12108,(#12112,#12119),.PCURVE_S1.);+#12108 = LINE('',#12109,#12110);+#12109 = CARTESIAN_POINT('',(-2.429496640897,-0.84,0.2479055467));+#12110 = VECTOR('',#12111,1.);+#12111 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12112 = PCURVE('',#11625,#12113);+#12113 = DEFINITIONAL_REPRESENTATION('',(#12114),#12118);+#12114 = LINE('',#12115,#12116);+#12115 = CARTESIAN_POINT('',(6.28318530718,0.));+#12116 = VECTOR('',#12117,1.);+#12117 = DIRECTION('',(0.,-1.));+#12118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12119 = PCURVE('',#11596,#12120);+#12120 = DEFINITIONAL_REPRESENTATION('',(#12121),#12125);+#12121 = LINE('',#12122,#12123);+#12122 = CARTESIAN_POINT('',(0.501052433606,9.270141137704E-19));+#12123 = VECTOR('',#12124,1.);+#12124 = DIRECTION('',(5.385465771581E-30,-1.));+#12125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12126 = ADVANCED_FACE('',(#12127),#11596,.F.);+#12127 = FACE_BOUND('',#12128,.F.);+#12128 = EDGE_LOOP('',(#12129,#12152,#12153,#12154));+#12129 = ORIENTED_EDGE('',*,*,#12130,.T.);+#12130 = EDGE_CURVE('',#12131,#11548,#12133,.T.);+#12131 = VERTEX_POINT('',#12132);+#12132 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767));+#12133 = SURFACE_CURVE('',#12134,(#12138,#12145),.PCURVE_S1.);+#12134 = LINE('',#12135,#12136);+#12135 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767));+#12136 = VECTOR('',#12137,1.);+#12137 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12138 = PCURVE('',#11596,#12139);+#12139 = DEFINITIONAL_REPRESENTATION('',(#12140),#12144);+#12140 = LINE('',#12141,#12142);+#12141 = CARTESIAN_POINT('',(0.,-0.));+#12142 = VECTOR('',#12143,1.);+#12143 = DIRECTION('',(5.385465771581E-30,-1.));+#12144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12145 = PCURVE('',#11568,#12146);+#12146 = DEFINITIONAL_REPRESENTATION('',(#12147),#12151);+#12147 = LINE('',#12148,#12149);+#12148 = CARTESIAN_POINT('',(1.396263401592,0.));+#12149 = VECTOR('',#12150,1.);+#12150 = DIRECTION('',(0.,-1.));+#12151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12152 = ORIENTED_EDGE('',*,*,#11580,.T.);+#12153 = ORIENTED_EDGE('',*,*,#12106,.F.);+#12154 = ORIENTED_EDGE('',*,*,#12155,.F.);+#12155 = EDGE_CURVE('',#12131,#12081,#12156,.T.);+#12156 = SURFACE_CURVE('',#12157,(#12161,#12168),.PCURVE_S1.);+#12157 = LINE('',#12158,#12159);+#12158 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767));+#12159 = VECTOR('',#12160,1.);+#12160 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#12161 = PCURVE('',#11596,#12162);+#12162 = DEFINITIONAL_REPRESENTATION('',(#12163),#12167);+#12163 = LINE('',#12164,#12165);+#12164 = CARTESIAN_POINT('',(0.,-0.));+#12165 = VECTOR('',#12166,1.);+#12166 = DIRECTION('',(1.,5.984962792299E-34));+#12167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12168 = PCURVE('',#1868,#12169);+#12169 = DEFINITIONAL_REPRESENTATION('',(#12170),#12174);+#12170 = LINE('',#12171,#12172);+#12171 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#12172 = VECTOR('',#12173,1.);+#12173 = DIRECTION('',(-0.986841372087,-0.161691392282));+#12174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12175 = ADVANCED_FACE('',(#12176),#11568,.F.);+#12176 = FACE_BOUND('',#12177,.F.);+#12177 = EDGE_LOOP('',(#12178,#12201,#12202,#12203));+#12178 = ORIENTED_EDGE('',*,*,#12179,.T.);+#12179 = EDGE_CURVE('',#12180,#11525,#12182,.T.);+#12180 = VERTEX_POINT('',#12181);+#12181 = CARTESIAN_POINT('',(-2.25,-0.84,0.825));+#12182 = SURFACE_CURVE('',#12183,(#12187,#12194),.PCURVE_S1.);+#12183 = LINE('',#12184,#12185);+#12184 = CARTESIAN_POINT('',(-2.25,-0.84,0.825));+#12185 = VECTOR('',#12186,1.);+#12186 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12187 = PCURVE('',#11568,#12188);+#12188 = DEFINITIONAL_REPRESENTATION('',(#12189),#12193);+#12189 = LINE('',#12190,#12191);+#12190 = CARTESIAN_POINT('',(0.,0.));+#12191 = VECTOR('',#12192,1.);+#12192 = DIRECTION('',(0.,-1.));+#12193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12194 = PCURVE('',#418,#12195);+#12195 = DEFINITIONAL_REPRESENTATION('',(#12196),#12200);+#12196 = LINE('',#12197,#12198);+#12197 = CARTESIAN_POINT('',(0.45,5.149069853499E-18));+#12198 = VECTOR('',#12199,1.);+#12199 = DIRECTION('',(0.,-1.));+#12200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12201 = ORIENTED_EDGE('',*,*,#11547,.T.);+#12202 = ORIENTED_EDGE('',*,*,#12130,.F.);+#12203 = ORIENTED_EDGE('',*,*,#12204,.F.);+#12204 = EDGE_CURVE('',#12180,#12131,#12205,.T.);+#12205 = SURFACE_CURVE('',#12206,(#12211,#12218),.PCURVE_S1.);+#12206 = CIRCLE('',#12207,0.1);+#12207 = AXIS2_PLACEMENT_3D('',#12208,#12209,#12210);+#12208 = CARTESIAN_POINT('',(-2.25,-0.84,0.725));+#12209 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#12210 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#12211 = PCURVE('',#11568,#12212);+#12212 = DEFINITIONAL_REPRESENTATION('',(#12213),#12217);+#12213 = LINE('',#12214,#12215);+#12214 = CARTESIAN_POINT('',(0.,0.));+#12215 = VECTOR('',#12216,1.);+#12216 = DIRECTION('',(1.,0.));+#12217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12218 = PCURVE('',#1868,#12219);+#12219 = DEFINITIONAL_REPRESENTATION('',(#12220),#12228);+#12220 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12221,#12222,#12223,#12224+ ,#12225,#12226,#12227),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12221 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#12222 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#12223 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#12224 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#12225 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#12226 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#12227 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#12228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12229 = ADVANCED_FACE('',(#12230),#1896,.T.);+#12230 = FACE_BOUND('',#12231,.T.);+#12231 = EDGE_LOOP('',(#12232,#12254,#12255,#12256));+#12232 = ORIENTED_EDGE('',*,*,#12233,.T.);+#12233 = EDGE_CURVE('',#11833,#1853,#12234,.T.);+#12234 = SURFACE_CURVE('',#12235,(#12240,#12247),.PCURVE_S1.);+#12235 = CIRCLE('',#12236,0.3);+#12236 = AXIS2_PLACEMENT_3D('',#12237,#12238,#12239);+#12237 = CARTESIAN_POINT('',(-2.25,-0.84,0.725));+#12238 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#12239 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#12240 = PCURVE('',#1896,#12241);+#12241 = DEFINITIONAL_REPRESENTATION('',(#12242),#12246);+#12242 = LINE('',#12243,#12244);+#12243 = CARTESIAN_POINT('',(6.28318530718,0.));+#12244 = VECTOR('',#12245,1.);+#12245 = DIRECTION('',(-1.,0.));+#12246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12247 = PCURVE('',#1868,#12248);+#12248 = DEFINITIONAL_REPRESENTATION('',(#12249),#12253);+#12249 = CIRCLE('',#12250,0.3);+#12250 = AXIS2_PLACEMENT_2D('',#12251,#12252);+#12251 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#12252 = DIRECTION('',(0.173648177667,-0.984807753012));+#12253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12254 = ORIENTED_EDGE('',*,*,#1880,.T.);+#12255 = ORIENTED_EDGE('',*,*,#11782,.F.);+#12256 = ORIENTED_EDGE('',*,*,#11832,.F.);+#12257 = ADVANCED_FACE('',(#12258),#1868,.F.);+#12258 = FACE_BOUND('',#12259,.F.);+#12259 = EDGE_LOOP('',(#12260,#12281,#12302,#12303,#12304,#12305,#12306,+ #12307,#12308,#12309,#12310,#12311));+#12260 = ORIENTED_EDGE('',*,*,#12261,.F.);+#12261 = EDGE_CURVE('',#403,#1830,#12262,.T.);+#12262 = SURFACE_CURVE('',#12263,(#12267,#12274),.PCURVE_S1.);+#12263 = LINE('',#12264,#12265);+#12264 = CARTESIAN_POINT('',(-1.95,-0.84,0.786976568901));+#12265 = VECTOR('',#12266,1.);+#12266 = DIRECTION('',(0.,0.,1.));+#12267 = PCURVE('',#1868,#12268);+#12268 = DEFINITIONAL_REPRESENTATION('',(#12269),#12273);+#12269 = LINE('',#12270,#12271);+#12270 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#12271 = VECTOR('',#12272,1.);+#12272 = DIRECTION('',(1.,0.));+#12273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12274 = PCURVE('',#446,#12275);+#12275 = DEFINITIONAL_REPRESENTATION('',(#12276),#12280);+#12276 = LINE('',#12277,#12278);+#12277 = CARTESIAN_POINT('',(1.435,-0.238023431099));+#12278 = VECTOR('',#12279,1.);+#12279 = DIRECTION('',(0.,1.));+#12280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12281 = ORIENTED_EDGE('',*,*,#12282,.T.);+#12282 = EDGE_CURVE('',#403,#12180,#12283,.T.);+#12283 = SURFACE_CURVE('',#12284,(#12288,#12295),.PCURVE_S1.);+#12284 = LINE('',#12285,#12286);+#12285 = CARTESIAN_POINT('',(-1.8,-0.84,0.825));+#12286 = VECTOR('',#12287,1.);+#12287 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#12288 = PCURVE('',#1868,#12289);+#12289 = DEFINITIONAL_REPRESENTATION('',(#12290),#12294);+#12290 = LINE('',#12291,#12292);+#12291 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#12292 = VECTOR('',#12293,1.);+#12293 = DIRECTION('',(0.,-1.));+#12294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12295 = PCURVE('',#418,#12296);+#12296 = DEFINITIONAL_REPRESENTATION('',(#12297),#12301);+#12297 = LINE('',#12298,#12299);+#12298 = CARTESIAN_POINT('',(0.,0.));+#12299 = VECTOR('',#12300,1.);+#12300 = DIRECTION('',(1.,0.));+#12301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12302 = ORIENTED_EDGE('',*,*,#12204,.T.);+#12303 = ORIENTED_EDGE('',*,*,#12155,.T.);+#12304 = ORIENTED_EDGE('',*,*,#12080,.T.);+#12305 = ORIENTED_EDGE('',*,*,#12056,.T.);+#12306 = ORIENTED_EDGE('',*,*,#12007,.T.);+#12307 = ORIENTED_EDGE('',*,*,#11958,.T.);+#12308 = ORIENTED_EDGE('',*,*,#11904,.T.);+#12309 = ORIENTED_EDGE('',*,*,#11855,.T.);+#12310 = ORIENTED_EDGE('',*,*,#12233,.T.);+#12311 = ORIENTED_EDGE('',*,*,#1852,.T.);+#12312 = ADVANCED_FACE('',(#12313),#1817,.T.);+#12313 = FACE_BOUND('',#12314,.T.);+#12314 = EDGE_LOOP('',(#12315,#12336,#12359,#12392,#12420,#12449,#12477,+ #12505,#12533,#12566,#12594,#12616));+#12315 = ORIENTED_EDGE('',*,*,#12316,.F.);+#12316 = EDGE_CURVE('',#431,#1802,#12317,.T.);+#12317 = SURFACE_CURVE('',#12318,(#12322,#12329),.PCURVE_S1.);+#12318 = LINE('',#12319,#12320);+#12319 = CARTESIAN_POINT('',(-1.95,-1.7,0.786976568901));+#12320 = VECTOR('',#12321,1.);+#12321 = DIRECTION('',(0.,0.,1.));+#12322 = PCURVE('',#1817,#12323);+#12323 = DEFINITIONAL_REPRESENTATION('',(#12324),#12328);+#12324 = LINE('',#12325,#12326);+#12325 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#12326 = VECTOR('',#12327,1.);+#12327 = DIRECTION('',(1.,0.));+#12328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12329 = PCURVE('',#446,#12330);+#12330 = DEFINITIONAL_REPRESENTATION('',(#12331),#12335);+#12331 = LINE('',#12332,#12333);+#12332 = CARTESIAN_POINT('',(0.575,-0.238023431099));+#12333 = VECTOR('',#12334,1.);+#12334 = DIRECTION('',(0.,1.));+#12335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12336 = ORIENTED_EDGE('',*,*,#12337,.T.);+#12337 = EDGE_CURVE('',#431,#12338,#12340,.T.);+#12338 = VERTEX_POINT('',#12339);+#12339 = CARTESIAN_POINT('',(-2.25,-1.7,0.825));+#12340 = SURFACE_CURVE('',#12341,(#12345,#12352),.PCURVE_S1.);+#12341 = LINE('',#12342,#12343);+#12342 = CARTESIAN_POINT('',(-1.8,-1.7,0.825));+#12343 = VECTOR('',#12344,1.);+#12344 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#12345 = PCURVE('',#1817,#12346);+#12346 = DEFINITIONAL_REPRESENTATION('',(#12347),#12351);+#12347 = LINE('',#12348,#12349);+#12348 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#12349 = VECTOR('',#12350,1.);+#12350 = DIRECTION('',(0.,-1.));+#12351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12352 = PCURVE('',#474,#12353);+#12353 = DEFINITIONAL_REPRESENTATION('',(#12354),#12358);+#12354 = LINE('',#12355,#12356);+#12355 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#12356 = VECTOR('',#12357,1.);+#12357 = DIRECTION('',(1.,0.));+#12358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12359 = ORIENTED_EDGE('',*,*,#12360,.T.);+#12360 = EDGE_CURVE('',#12338,#12361,#12363,.T.);+#12361 = VERTEX_POINT('',#12362);+#12362 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.742364817767));+#12363 = SURFACE_CURVE('',#12364,(#12369,#12380),.PCURVE_S1.);+#12364 = CIRCLE('',#12365,0.1);+#12365 = AXIS2_PLACEMENT_3D('',#12366,#12367,#12368);+#12366 = CARTESIAN_POINT('',(-2.25,-1.7,0.725));+#12367 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#12368 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#12369 = PCURVE('',#1817,#12370);+#12370 = DEFINITIONAL_REPRESENTATION('',(#12371),#12379);+#12371 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12372,#12373,#12374,#12375+ ,#12376,#12377,#12378),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12372 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#12373 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#12374 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#12375 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#12376 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#12377 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#12378 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#12379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12380 = PCURVE('',#12381,#12386);+#12381 = CYLINDRICAL_SURFACE('',#12382,0.1);+#12382 = AXIS2_PLACEMENT_3D('',#12383,#12384,#12385);+#12383 = CARTESIAN_POINT('',(-2.25,-2.11,0.725));+#12384 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#12385 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#12386 = DEFINITIONAL_REPRESENTATION('',(#12387),#12391);+#12387 = LINE('',#12388,#12389);+#12388 = CARTESIAN_POINT('',(0.,-0.41));+#12389 = VECTOR('',#12390,1.);+#12390 = DIRECTION('',(1.,0.));+#12391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12392 = ORIENTED_EDGE('',*,*,#12393,.T.);+#12393 = EDGE_CURVE('',#12361,#12394,#12396,.T.);+#12394 = VERTEX_POINT('',#12395);+#12395 = CARTESIAN_POINT('',(-2.429496640897,-1.7,0.2479055467));+#12396 = SURFACE_CURVE('',#12397,(#12401,#12408),.PCURVE_S1.);+#12397 = LINE('',#12398,#12399);+#12398 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.742364817767));+#12399 = VECTOR('',#12400,1.);+#12400 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#12401 = PCURVE('',#1817,#12402);+#12402 = DEFINITIONAL_REPRESENTATION('',(#12403),#12407);+#12403 = LINE('',#12404,#12405);+#12404 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#12405 = VECTOR('',#12406,1.);+#12406 = DIRECTION('',(-0.986841372087,-0.161691392282));+#12407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12408 = PCURVE('',#12409,#12414);+#12409 = PLANE('',#12410);+#12410 = AXIS2_PLACEMENT_3D('',#12411,#12412,#12413);+#12411 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767));+#12412 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282+ ));+#12413 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#12414 = DEFINITIONAL_REPRESENTATION('',(#12415),#12419);+#12415 = LINE('',#12416,#12417);+#12416 = CARTESIAN_POINT('',(7.585549159209E-19,-0.41));+#12417 = VECTOR('',#12418,1.);+#12418 = DIRECTION('',(1.,5.984962792299E-34));+#12419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12420 = ORIENTED_EDGE('',*,*,#12421,.T.);+#12421 = EDGE_CURVE('',#12394,#12422,#12424,.T.);+#12422 = VERTEX_POINT('',#12423);+#12423 = CARTESIAN_POINT('',(-2.724938966801,-1.7,-1.665334536938E-16));+#12424 = SURFACE_CURVE('',#12425,(#12430,#12437),.PCURVE_S1.);+#12425 = CIRCLE('',#12426,0.3);+#12426 = AXIS2_PLACEMENT_3D('',#12427,#12428,#12429);+#12427 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.3));+#12428 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#12429 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#12430 = PCURVE('',#1817,#12431);+#12431 = DEFINITIONAL_REPRESENTATION('',(#12432),#12436);+#12432 = CIRCLE('',#12433,0.3);+#12433 = AXIS2_PLACEMENT_2D('',#12434,#12435);+#12434 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#12435 = DIRECTION('',(-0.173648177667,0.984807753012));+#12436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12437 = PCURVE('',#12438,#12443);+#12438 = CYLINDRICAL_SURFACE('',#12439,0.3);+#12439 = AXIS2_PLACEMENT_3D('',#12440,#12441,#12442);+#12440 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3));+#12441 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#12442 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#12443 = DEFINITIONAL_REPRESENTATION('',(#12444),#12448);+#12444 = LINE('',#12445,#12446);+#12445 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#12446 = VECTOR('',#12447,1.);+#12447 = DIRECTION('',(-1.,0.));+#12448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12449 = ORIENTED_EDGE('',*,*,#12450,.T.);+#12450 = EDGE_CURVE('',#12422,#12451,#12453,.T.);+#12451 = VERTEX_POINT('',#12452);+#12452 = CARTESIAN_POINT('',(-3.,-1.7,-1.665334536938E-16));+#12453 = SURFACE_CURVE('',#12454,(#12458,#12465),.PCURVE_S1.);+#12454 = LINE('',#12455,#12456);+#12455 = CARTESIAN_POINT('',(-2.724938966801,-1.7,-1.665334536938E-16));+#12456 = VECTOR('',#12457,1.);+#12457 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#12458 = PCURVE('',#1817,#12459);+#12459 = DEFINITIONAL_REPRESENTATION('',(#12460),#12464);+#12460 = LINE('',#12461,#12462);+#12461 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#12462 = VECTOR('',#12463,1.);+#12463 = DIRECTION('',(0.,-1.));+#12464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12465 = PCURVE('',#12466,#12471);+#12466 = PLANE('',#12467);+#12467 = AXIS2_PLACEMENT_3D('',#12468,#12469,#12470);+#12468 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16)+ );+#12469 = DIRECTION('',(0.,0.,1.));+#12470 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#12471 = DEFINITIONAL_REPRESENTATION('',(#12472),#12476);+#12472 = LINE('',#12473,#12474);+#12473 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#12474 = VECTOR('',#12475,1.);+#12475 = DIRECTION('',(1.,0.));+#12476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12477 = ORIENTED_EDGE('',*,*,#12478,.T.);+#12478 = EDGE_CURVE('',#12451,#12479,#12481,.T.);+#12479 = VERTEX_POINT('',#12480);+#12480 = CARTESIAN_POINT('',(-3.,-1.7,0.2));+#12481 = SURFACE_CURVE('',#12482,(#12486,#12493),.PCURVE_S1.);+#12482 = LINE('',#12483,#12484);+#12483 = CARTESIAN_POINT('',(-3.,-1.7,-1.665334536938E-16));+#12484 = VECTOR('',#12485,1.);+#12485 = DIRECTION('',(0.,0.,1.));+#12486 = PCURVE('',#1817,#12487);+#12487 = DEFINITIONAL_REPRESENTATION('',(#12488),#12492);+#12488 = LINE('',#12489,#12490);+#12489 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#12490 = VECTOR('',#12491,1.);+#12491 = DIRECTION('',(1.,0.));+#12492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12493 = PCURVE('',#12494,#12499);+#12494 = PLANE('',#12495);+#12495 = AXIS2_PLACEMENT_3D('',#12496,#12497,#12498);+#12496 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16));+#12497 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#12498 = DIRECTION('',(0.,0.,1.));+#12499 = DEFINITIONAL_REPRESENTATION('',(#12500),#12504);+#12500 = LINE('',#12501,#12502);+#12501 = CARTESIAN_POINT('',(0.,-0.41));+#12502 = VECTOR('',#12503,1.);+#12503 = DIRECTION('',(1.,0.));+#12504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12505 = ORIENTED_EDGE('',*,*,#12506,.T.);+#12506 = EDGE_CURVE('',#12479,#12507,#12509,.T.);+#12507 = VERTEX_POINT('',#12508);+#12508 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.2));+#12509 = SURFACE_CURVE('',#12510,(#12514,#12521),.PCURVE_S1.);+#12510 = LINE('',#12511,#12512);+#12511 = CARTESIAN_POINT('',(-3.,-1.7,0.2));+#12512 = VECTOR('',#12513,1.);+#12513 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#12514 = PCURVE('',#1817,#12515);+#12515 = DEFINITIONAL_REPRESENTATION('',(#12516),#12520);+#12516 = LINE('',#12517,#12518);+#12517 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#12518 = VECTOR('',#12519,1.);+#12519 = DIRECTION('',(0.,1.));+#12520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12521 = PCURVE('',#12522,#12527);+#12522 = PLANE('',#12523);+#12523 = AXIS2_PLACEMENT_3D('',#12524,#12525,#12526);+#12524 = CARTESIAN_POINT('',(-3.,-2.11,0.2));+#12525 = DIRECTION('',(0.,0.,-1.));+#12526 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#12527 = DEFINITIONAL_REPRESENTATION('',(#12528),#12532);+#12528 = LINE('',#12529,#12530);+#12529 = CARTESIAN_POINT('',(-4.69137475541E-18,-0.41));+#12530 = VECTOR('',#12531,1.);+#12531 = DIRECTION('',(1.,0.));+#12532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12533 = ORIENTED_EDGE('',*,*,#12534,.T.);+#12534 = EDGE_CURVE('',#12507,#12535,#12537,.T.);+#12535 = VERTEX_POINT('',#12536);+#12536 = CARTESIAN_POINT('',(-2.6264581915,-1.7,0.282635182233));+#12537 = SURFACE_CURVE('',#12538,(#12543,#12554),.PCURVE_S1.);+#12538 = CIRCLE('',#12539,0.1);+#12539 = AXIS2_PLACEMENT_3D('',#12540,#12541,#12542);+#12540 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.3));+#12541 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#12542 = DIRECTION('',(0.,0.,-1.));+#12543 = PCURVE('',#1817,#12544);+#12544 = DEFINITIONAL_REPRESENTATION('',(#12545),#12553);+#12545 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12546,#12547,#12548,#12549+ ,#12550,#12551,#12552),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12546 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#12547 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#12548 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#12549 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#12550 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#12551 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#12552 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#12553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12554 = PCURVE('',#12555,#12560);+#12555 = CYLINDRICAL_SURFACE('',#12556,0.1);+#12556 = AXIS2_PLACEMENT_3D('',#12557,#12558,#12559);+#12557 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3));+#12558 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#12559 = DIRECTION('',(-0.,0.,-1.));+#12560 = DEFINITIONAL_REPRESENTATION('',(#12561),#12565);+#12561 = LINE('',#12562,#12563);+#12562 = CARTESIAN_POINT('',(0.,-0.41));+#12563 = VECTOR('',#12564,1.);+#12564 = DIRECTION('',(1.,0.));+#12565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12566 = ORIENTED_EDGE('',*,*,#12567,.T.);+#12567 = EDGE_CURVE('',#12535,#12568,#12570,.T.);+#12568 = VERTEX_POINT('',#12569);+#12569 = CARTESIAN_POINT('',(-2.545442325904,-1.7,0.7770944533));+#12570 = SURFACE_CURVE('',#12571,(#12575,#12582),.PCURVE_S1.);+#12571 = LINE('',#12572,#12573);+#12572 = CARTESIAN_POINT('',(-2.6264581915,-1.7,0.282635182233));+#12573 = VECTOR('',#12574,1.);+#12574 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#12575 = PCURVE('',#1817,#12576);+#12576 = DEFINITIONAL_REPRESENTATION('',(#12577),#12581);+#12577 = LINE('',#12578,#12579);+#12578 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#12579 = VECTOR('',#12580,1.);+#12580 = DIRECTION('',(0.986841372087,0.161691392282));+#12581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12582 = PCURVE('',#12583,#12588);+#12583 = PLANE('',#12584);+#12584 = AXIS2_PLACEMENT_3D('',#12585,#12586,#12587);+#12585 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233));+#12586 = DIRECTION('',(0.986841372087,-1.129181146488E-17,+ -0.161691392282));+#12587 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#12588 = DEFINITIONAL_REPRESENTATION('',(#12589),#12593);+#12589 = LINE('',#12590,#12591);+#12590 = CARTESIAN_POINT('',(-7.585549159209E-19,-0.41));+#12591 = VECTOR('',#12592,1.);+#12592 = DIRECTION('',(1.,-5.984962792299E-34));+#12593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12594 = ORIENTED_EDGE('',*,*,#12595,.T.);+#12595 = EDGE_CURVE('',#12568,#1774,#12596,.T.);+#12596 = SURFACE_CURVE('',#12597,(#12602,#12609),.PCURVE_S1.);+#12597 = CIRCLE('',#12598,0.3);+#12598 = AXIS2_PLACEMENT_3D('',#12599,#12600,#12601);+#12599 = CARTESIAN_POINT('',(-2.25,-1.7,0.725));+#12600 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#12601 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#12602 = PCURVE('',#1817,#12603);+#12603 = DEFINITIONAL_REPRESENTATION('',(#12604),#12608);+#12604 = CIRCLE('',#12605,0.3);+#12605 = AXIS2_PLACEMENT_2D('',#12606,#12607);+#12606 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#12607 = DIRECTION('',(0.173648177667,-0.984807753012));+#12608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12609 = PCURVE('',#1789,#12610);+#12610 = DEFINITIONAL_REPRESENTATION('',(#12611),#12615);+#12611 = LINE('',#12612,#12613);+#12612 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#12613 = VECTOR('',#12614,1.);+#12614 = DIRECTION('',(-1.,0.));+#12615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12616 = ORIENTED_EDGE('',*,*,#1801,.T.);+#12617 = ADVANCED_FACE('',(#12618),#12583,.F.);+#12618 = FACE_BOUND('',#12619,.F.);+#12619 = EDGE_LOOP('',(#12620,#12643,#12644,#12667));+#12620 = ORIENTED_EDGE('',*,*,#12621,.T.);+#12621 = EDGE_CURVE('',#12622,#12535,#12624,.T.);+#12622 = VERTEX_POINT('',#12623);+#12623 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233));+#12624 = SURFACE_CURVE('',#12625,(#12629,#12636),.PCURVE_S1.);+#12625 = LINE('',#12626,#12627);+#12626 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233));+#12627 = VECTOR('',#12628,1.);+#12628 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12629 = PCURVE('',#12583,#12630);+#12630 = DEFINITIONAL_REPRESENTATION('',(#12631),#12635);+#12631 = LINE('',#12632,#12633);+#12632 = CARTESIAN_POINT('',(0.,-0.));+#12633 = VECTOR('',#12634,1.);+#12634 = DIRECTION('',(-5.385465771581E-30,-1.));+#12635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12636 = PCURVE('',#12555,#12637);+#12637 = DEFINITIONAL_REPRESENTATION('',(#12638),#12642);+#12638 = LINE('',#12639,#12640);+#12639 = CARTESIAN_POINT('',(1.396263401592,0.));+#12640 = VECTOR('',#12641,1.);+#12641 = DIRECTION('',(0.,-1.));+#12642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12643 = ORIENTED_EDGE('',*,*,#12567,.T.);+#12644 = ORIENTED_EDGE('',*,*,#12645,.F.);+#12645 = EDGE_CURVE('',#12646,#12568,#12648,.T.);+#12646 = VERTEX_POINT('',#12647);+#12647 = CARTESIAN_POINT('',(-2.545442325904,-2.11,0.7770944533));+#12648 = SURFACE_CURVE('',#12649,(#12653,#12660),.PCURVE_S1.);+#12649 = LINE('',#12650,#12651);+#12650 = CARTESIAN_POINT('',(-2.545442325904,-2.11,0.7770944533));+#12651 = VECTOR('',#12652,1.);+#12652 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12653 = PCURVE('',#12583,#12654);+#12654 = DEFINITIONAL_REPRESENTATION('',(#12655),#12659);+#12655 = LINE('',#12656,#12657);+#12656 = CARTESIAN_POINT('',(0.501052433606,-9.270141137704E-19));+#12657 = VECTOR('',#12658,1.);+#12658 = DIRECTION('',(-5.385465771581E-30,-1.));+#12659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12660 = PCURVE('',#1789,#12661);+#12661 = DEFINITIONAL_REPRESENTATION('',(#12662),#12666);+#12662 = LINE('',#12663,#12664);+#12663 = CARTESIAN_POINT('',(6.28318530718,0.));+#12664 = VECTOR('',#12665,1.);+#12665 = DIRECTION('',(0.,-1.));+#12666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12667 = ORIENTED_EDGE('',*,*,#12668,.F.);+#12668 = EDGE_CURVE('',#12622,#12646,#12669,.T.);+#12669 = SURFACE_CURVE('',#12670,(#12674,#12681),.PCURVE_S1.);+#12670 = LINE('',#12671,#12672);+#12671 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233));+#12672 = VECTOR('',#12673,1.);+#12673 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#12674 = PCURVE('',#12583,#12675);+#12675 = DEFINITIONAL_REPRESENTATION('',(#12676),#12680);+#12676 = LINE('',#12677,#12678);+#12677 = CARTESIAN_POINT('',(0.,-0.));+#12678 = VECTOR('',#12679,1.);+#12679 = DIRECTION('',(1.,-5.984962792299E-34));+#12680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12681 = PCURVE('',#1761,#12682);+#12682 = DEFINITIONAL_REPRESENTATION('',(#12683),#12687);+#12683 = LINE('',#12684,#12685);+#12684 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#12685 = VECTOR('',#12686,1.);+#12686 = DIRECTION('',(0.986841372087,0.161691392282));+#12687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12688 = ADVANCED_FACE('',(#12689),#12555,.F.);+#12689 = FACE_BOUND('',#12690,.F.);+#12690 = EDGE_LOOP('',(#12691,#12714,#12715,#12716));+#12691 = ORIENTED_EDGE('',*,*,#12692,.T.);+#12692 = EDGE_CURVE('',#12693,#12507,#12695,.T.);+#12693 = VERTEX_POINT('',#12694);+#12694 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.2));+#12695 = SURFACE_CURVE('',#12696,(#12700,#12707),.PCURVE_S1.);+#12696 = LINE('',#12697,#12698);+#12697 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.2));+#12698 = VECTOR('',#12699,1.);+#12699 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12700 = PCURVE('',#12555,#12701);+#12701 = DEFINITIONAL_REPRESENTATION('',(#12702),#12706);+#12702 = LINE('',#12703,#12704);+#12703 = CARTESIAN_POINT('',(0.,0.));+#12704 = VECTOR('',#12705,1.);+#12705 = DIRECTION('',(0.,-1.));+#12706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12707 = PCURVE('',#12522,#12708);+#12708 = DEFINITIONAL_REPRESENTATION('',(#12709),#12713);+#12709 = LINE('',#12710,#12711);+#12710 = CARTESIAN_POINT('',(0.275061033199,-3.147352164261E-18));+#12711 = VECTOR('',#12712,1.);+#12712 = DIRECTION('',(0.,-1.));+#12713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12714 = ORIENTED_EDGE('',*,*,#12534,.T.);+#12715 = ORIENTED_EDGE('',*,*,#12621,.F.);+#12716 = ORIENTED_EDGE('',*,*,#12717,.F.);+#12717 = EDGE_CURVE('',#12693,#12622,#12718,.T.);+#12718 = SURFACE_CURVE('',#12719,(#12724,#12731),.PCURVE_S1.);+#12719 = CIRCLE('',#12720,0.1);+#12720 = AXIS2_PLACEMENT_3D('',#12721,#12722,#12723);+#12721 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3));+#12722 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#12723 = DIRECTION('',(0.,0.,-1.));+#12724 = PCURVE('',#12555,#12725);+#12725 = DEFINITIONAL_REPRESENTATION('',(#12726),#12730);+#12726 = LINE('',#12727,#12728);+#12727 = CARTESIAN_POINT('',(0.,0.));+#12728 = VECTOR('',#12729,1.);+#12729 = DIRECTION('',(1.,0.));+#12730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12731 = PCURVE('',#1761,#12732);+#12732 = DEFINITIONAL_REPRESENTATION('',(#12733),#12741);+#12733 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12734,#12735,#12736,#12737+ ,#12738,#12739,#12740),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12734 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#12735 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#12736 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#12737 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#12738 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#12739 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#12740 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#12741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12742 = ADVANCED_FACE('',(#12743),#12522,.F.);+#12743 = FACE_BOUND('',#12744,.F.);+#12744 = EDGE_LOOP('',(#12745,#12768,#12769,#12770));+#12745 = ORIENTED_EDGE('',*,*,#12746,.T.);+#12746 = EDGE_CURVE('',#12747,#12479,#12749,.T.);+#12747 = VERTEX_POINT('',#12748);+#12748 = CARTESIAN_POINT('',(-3.,-2.11,0.2));+#12749 = SURFACE_CURVE('',#12750,(#12754,#12761),.PCURVE_S1.);+#12750 = LINE('',#12751,#12752);+#12751 = CARTESIAN_POINT('',(-3.,-2.11,0.2));+#12752 = VECTOR('',#12753,1.);+#12753 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12754 = PCURVE('',#12522,#12755);+#12755 = DEFINITIONAL_REPRESENTATION('',(#12756),#12760);+#12756 = LINE('',#12757,#12758);+#12757 = CARTESIAN_POINT('',(0.,-0.));+#12758 = VECTOR('',#12759,1.);+#12759 = DIRECTION('',(0.,-1.));+#12760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12761 = PCURVE('',#12494,#12762);+#12762 = DEFINITIONAL_REPRESENTATION('',(#12763),#12767);+#12763 = LINE('',#12764,#12765);+#12764 = CARTESIAN_POINT('',(0.2,0.));+#12765 = VECTOR('',#12766,1.);+#12766 = DIRECTION('',(0.,-1.));+#12767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12768 = ORIENTED_EDGE('',*,*,#12506,.T.);+#12769 = ORIENTED_EDGE('',*,*,#12692,.F.);+#12770 = ORIENTED_EDGE('',*,*,#12771,.F.);+#12771 = EDGE_CURVE('',#12747,#12693,#12772,.T.);+#12772 = SURFACE_CURVE('',#12773,(#12777,#12784),.PCURVE_S1.);+#12773 = LINE('',#12774,#12775);+#12774 = CARTESIAN_POINT('',(-3.,-2.11,0.2));+#12775 = VECTOR('',#12776,1.);+#12776 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#12777 = PCURVE('',#12522,#12778);+#12778 = DEFINITIONAL_REPRESENTATION('',(#12779),#12783);+#12779 = LINE('',#12780,#12781);+#12780 = CARTESIAN_POINT('',(0.,-0.));+#12781 = VECTOR('',#12782,1.);+#12782 = DIRECTION('',(1.,0.));+#12783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12784 = PCURVE('',#1761,#12785);+#12785 = DEFINITIONAL_REPRESENTATION('',(#12786),#12790);+#12786 = LINE('',#12787,#12788);+#12787 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#12788 = VECTOR('',#12789,1.);+#12789 = DIRECTION('',(0.,1.));+#12790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12791 = ADVANCED_FACE('',(#12792),#12494,.F.);+#12792 = FACE_BOUND('',#12793,.F.);+#12793 = EDGE_LOOP('',(#12794,#12817,#12818,#12819));+#12794 = ORIENTED_EDGE('',*,*,#12795,.T.);+#12795 = EDGE_CURVE('',#12796,#12451,#12798,.T.);+#12796 = VERTEX_POINT('',#12797);+#12797 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16));+#12798 = SURFACE_CURVE('',#12799,(#12803,#12810),.PCURVE_S1.);+#12799 = LINE('',#12800,#12801);+#12800 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16));+#12801 = VECTOR('',#12802,1.);+#12802 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12803 = PCURVE('',#12494,#12804);+#12804 = DEFINITIONAL_REPRESENTATION('',(#12805),#12809);+#12805 = LINE('',#12806,#12807);+#12806 = CARTESIAN_POINT('',(0.,0.));+#12807 = VECTOR('',#12808,1.);+#12808 = DIRECTION('',(0.,-1.));+#12809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12810 = PCURVE('',#12466,#12811);+#12811 = DEFINITIONAL_REPRESENTATION('',(#12812),#12816);+#12812 = LINE('',#12813,#12814);+#12813 = CARTESIAN_POINT('',(0.275061033199,3.147352164261E-18));+#12814 = VECTOR('',#12815,1.);+#12815 = DIRECTION('',(0.,-1.));+#12816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12817 = ORIENTED_EDGE('',*,*,#12478,.T.);+#12818 = ORIENTED_EDGE('',*,*,#12746,.F.);+#12819 = ORIENTED_EDGE('',*,*,#12820,.F.);+#12820 = EDGE_CURVE('',#12796,#12747,#12821,.T.);+#12821 = SURFACE_CURVE('',#12822,(#12826,#12833),.PCURVE_S1.);+#12822 = LINE('',#12823,#12824);+#12823 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16));+#12824 = VECTOR('',#12825,1.);+#12825 = DIRECTION('',(0.,0.,1.));+#12826 = PCURVE('',#12494,#12827);+#12827 = DEFINITIONAL_REPRESENTATION('',(#12828),#12832);+#12828 = LINE('',#12829,#12830);+#12829 = CARTESIAN_POINT('',(0.,0.));+#12830 = VECTOR('',#12831,1.);+#12831 = DIRECTION('',(1.,0.));+#12832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12833 = PCURVE('',#1761,#12834);+#12834 = DEFINITIONAL_REPRESENTATION('',(#12835),#12839);+#12835 = LINE('',#12836,#12837);+#12836 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#12837 = VECTOR('',#12838,1.);+#12838 = DIRECTION('',(1.,0.));+#12839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12840 = ADVANCED_FACE('',(#12841),#12466,.F.);+#12841 = FACE_BOUND('',#12842,.F.);+#12842 = EDGE_LOOP('',(#12843,#12866,#12867,#12868));+#12843 = ORIENTED_EDGE('',*,*,#12844,.T.);+#12844 = EDGE_CURVE('',#12845,#12422,#12847,.T.);+#12845 = VERTEX_POINT('',#12846);+#12846 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16)+ );+#12847 = SURFACE_CURVE('',#12848,(#12852,#12859),.PCURVE_S1.);+#12848 = LINE('',#12849,#12850);+#12849 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16)+ );+#12850 = VECTOR('',#12851,1.);+#12851 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12852 = PCURVE('',#12466,#12853);+#12853 = DEFINITIONAL_REPRESENTATION('',(#12854),#12858);+#12854 = LINE('',#12855,#12856);+#12855 = CARTESIAN_POINT('',(0.,0.));+#12856 = VECTOR('',#12857,1.);+#12857 = DIRECTION('',(0.,-1.));+#12858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12859 = PCURVE('',#12438,#12860);+#12860 = DEFINITIONAL_REPRESENTATION('',(#12861),#12865);+#12861 = LINE('',#12862,#12863);+#12862 = CARTESIAN_POINT('',(4.886921905584,0.));+#12863 = VECTOR('',#12864,1.);+#12864 = DIRECTION('',(0.,-1.));+#12865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12866 = ORIENTED_EDGE('',*,*,#12450,.T.);+#12867 = ORIENTED_EDGE('',*,*,#12795,.F.);+#12868 = ORIENTED_EDGE('',*,*,#12869,.F.);+#12869 = EDGE_CURVE('',#12845,#12796,#12870,.T.);+#12870 = SURFACE_CURVE('',#12871,(#12875,#12882),.PCURVE_S1.);+#12871 = LINE('',#12872,#12873);+#12872 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16)+ );+#12873 = VECTOR('',#12874,1.);+#12874 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#12875 = PCURVE('',#12466,#12876);+#12876 = DEFINITIONAL_REPRESENTATION('',(#12877),#12881);+#12877 = LINE('',#12878,#12879);+#12878 = CARTESIAN_POINT('',(0.,0.));+#12879 = VECTOR('',#12880,1.);+#12880 = DIRECTION('',(1.,0.));+#12881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12882 = PCURVE('',#1761,#12883);+#12883 = DEFINITIONAL_REPRESENTATION('',(#12884),#12888);+#12884 = LINE('',#12885,#12886);+#12885 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#12886 = VECTOR('',#12887,1.);+#12887 = DIRECTION('',(0.,-1.));+#12888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12889 = ADVANCED_FACE('',(#12890),#12438,.T.);+#12890 = FACE_BOUND('',#12891,.T.);+#12891 = EDGE_LOOP('',(#12892,#12916,#12917,#12918));+#12892 = ORIENTED_EDGE('',*,*,#12893,.T.);+#12893 = EDGE_CURVE('',#12894,#12845,#12896,.T.);+#12894 = VERTEX_POINT('',#12895);+#12895 = CARTESIAN_POINT('',(-2.429496640897,-2.11,0.2479055467));+#12896 = SURFACE_CURVE('',#12897,(#12902,#12909),.PCURVE_S1.);+#12897 = CIRCLE('',#12898,0.3);+#12898 = AXIS2_PLACEMENT_3D('',#12899,#12900,#12901);+#12899 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3));+#12900 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#12901 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#12902 = PCURVE('',#12438,#12903);+#12903 = DEFINITIONAL_REPRESENTATION('',(#12904),#12908);+#12904 = LINE('',#12905,#12906);+#12905 = CARTESIAN_POINT('',(6.28318530718,0.));+#12906 = VECTOR('',#12907,1.);+#12907 = DIRECTION('',(-1.,0.));+#12908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12909 = PCURVE('',#1761,#12910);+#12910 = DEFINITIONAL_REPRESENTATION('',(#12911),#12915);+#12911 = CIRCLE('',#12912,0.3);+#12912 = AXIS2_PLACEMENT_2D('',#12913,#12914);+#12913 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#12914 = DIRECTION('',(-0.173648177667,0.984807753012));+#12915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12916 = ORIENTED_EDGE('',*,*,#12844,.T.);+#12917 = ORIENTED_EDGE('',*,*,#12421,.F.);+#12918 = ORIENTED_EDGE('',*,*,#12919,.F.);+#12919 = EDGE_CURVE('',#12894,#12394,#12920,.T.);+#12920 = SURFACE_CURVE('',#12921,(#12925,#12932),.PCURVE_S1.);+#12921 = LINE('',#12922,#12923);+#12922 = CARTESIAN_POINT('',(-2.429496640897,-2.11,0.2479055467));+#12923 = VECTOR('',#12924,1.);+#12924 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12925 = PCURVE('',#12438,#12926);+#12926 = DEFINITIONAL_REPRESENTATION('',(#12927),#12931);+#12927 = LINE('',#12928,#12929);+#12928 = CARTESIAN_POINT('',(6.28318530718,0.));+#12929 = VECTOR('',#12930,1.);+#12930 = DIRECTION('',(0.,-1.));+#12931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12932 = PCURVE('',#12409,#12933);+#12933 = DEFINITIONAL_REPRESENTATION('',(#12934),#12938);+#12934 = LINE('',#12935,#12936);+#12935 = CARTESIAN_POINT('',(0.501052433606,9.270141137704E-19));+#12936 = VECTOR('',#12937,1.);+#12937 = DIRECTION('',(5.385465771581E-30,-1.));+#12938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12939 = ADVANCED_FACE('',(#12940),#12409,.F.);+#12940 = FACE_BOUND('',#12941,.F.);+#12941 = EDGE_LOOP('',(#12942,#12965,#12966,#12967));+#12942 = ORIENTED_EDGE('',*,*,#12943,.T.);+#12943 = EDGE_CURVE('',#12944,#12361,#12946,.T.);+#12944 = VERTEX_POINT('',#12945);+#12945 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767));+#12946 = SURFACE_CURVE('',#12947,(#12951,#12958),.PCURVE_S1.);+#12947 = LINE('',#12948,#12949);+#12948 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767));+#12949 = VECTOR('',#12950,1.);+#12950 = DIRECTION('',(1.144237745222E-17,1.,0.));+#12951 = PCURVE('',#12409,#12952);+#12952 = DEFINITIONAL_REPRESENTATION('',(#12953),#12957);+#12953 = LINE('',#12954,#12955);+#12954 = CARTESIAN_POINT('',(0.,-0.));+#12955 = VECTOR('',#12956,1.);+#12956 = DIRECTION('',(5.385465771581E-30,-1.));+#12957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12958 = PCURVE('',#12381,#12959);+#12959 = DEFINITIONAL_REPRESENTATION('',(#12960),#12964);+#12960 = LINE('',#12961,#12962);+#12961 = CARTESIAN_POINT('',(1.396263401592,0.));+#12962 = VECTOR('',#12963,1.);+#12963 = DIRECTION('',(0.,-1.));+#12964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12965 = ORIENTED_EDGE('',*,*,#12393,.T.);+#12966 = ORIENTED_EDGE('',*,*,#12919,.F.);+#12967 = ORIENTED_EDGE('',*,*,#12968,.F.);+#12968 = EDGE_CURVE('',#12944,#12894,#12969,.T.);+#12969 = SURFACE_CURVE('',#12970,(#12974,#12981),.PCURVE_S1.);+#12970 = LINE('',#12971,#12972);+#12971 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767));+#12972 = VECTOR('',#12973,1.);+#12973 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#12974 = PCURVE('',#12409,#12975);+#12975 = DEFINITIONAL_REPRESENTATION('',(#12976),#12980);+#12976 = LINE('',#12977,#12978);+#12977 = CARTESIAN_POINT('',(0.,-0.));+#12978 = VECTOR('',#12979,1.);+#12979 = DIRECTION('',(1.,5.984962792299E-34));+#12980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12981 = PCURVE('',#1761,#12982);+#12982 = DEFINITIONAL_REPRESENTATION('',(#12983),#12987);+#12983 = LINE('',#12984,#12985);+#12984 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#12985 = VECTOR('',#12986,1.);+#12986 = DIRECTION('',(-0.986841372087,-0.161691392282));+#12987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12988 = ADVANCED_FACE('',(#12989),#12381,.F.);+#12989 = FACE_BOUND('',#12990,.F.);+#12990 = EDGE_LOOP('',(#12991,#13014,#13015,#13016));+#12991 = ORIENTED_EDGE('',*,*,#12992,.T.);+#12992 = EDGE_CURVE('',#12993,#12338,#12995,.T.);+#12993 = VERTEX_POINT('',#12994);+#12994 = CARTESIAN_POINT('',(-2.25,-2.11,0.825));+#12995 = SURFACE_CURVE('',#12996,(#13000,#13007),.PCURVE_S1.);+#12996 = LINE('',#12997,#12998);+#12997 = CARTESIAN_POINT('',(-2.25,-2.11,0.825));+#12998 = VECTOR('',#12999,1.);+#12999 = DIRECTION('',(1.144237745222E-17,1.,0.));+#13000 = PCURVE('',#12381,#13001);+#13001 = DEFINITIONAL_REPRESENTATION('',(#13002),#13006);+#13002 = LINE('',#13003,#13004);+#13003 = CARTESIAN_POINT('',(0.,0.));+#13004 = VECTOR('',#13005,1.);+#13005 = DIRECTION('',(0.,-1.));+#13006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13007 = PCURVE('',#474,#13008);+#13008 = DEFINITIONAL_REPRESENTATION('',(#13009),#13013);+#13009 = LINE('',#13010,#13011);+#13010 = CARTESIAN_POINT('',(0.45,5.149069853499E-18));+#13011 = VECTOR('',#13012,1.);+#13012 = DIRECTION('',(0.,-1.));+#13013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13014 = ORIENTED_EDGE('',*,*,#12360,.T.);+#13015 = ORIENTED_EDGE('',*,*,#12943,.F.);+#13016 = ORIENTED_EDGE('',*,*,#13017,.F.);+#13017 = EDGE_CURVE('',#12993,#12944,#13018,.T.);+#13018 = SURFACE_CURVE('',#13019,(#13024,#13031),.PCURVE_S1.);+#13019 = CIRCLE('',#13020,0.1);+#13020 = AXIS2_PLACEMENT_3D('',#13021,#13022,#13023);+#13021 = CARTESIAN_POINT('',(-2.25,-2.11,0.725));+#13022 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#13023 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#13024 = PCURVE('',#12381,#13025);+#13025 = DEFINITIONAL_REPRESENTATION('',(#13026),#13030);+#13026 = LINE('',#13027,#13028);+#13027 = CARTESIAN_POINT('',(0.,0.));+#13028 = VECTOR('',#13029,1.);+#13029 = DIRECTION('',(1.,0.));+#13030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13031 = PCURVE('',#1761,#13032);+#13032 = DEFINITIONAL_REPRESENTATION('',(#13033),#13041);+#13033 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13034,#13035,#13036,#13037+ ,#13038,#13039,#13040),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13034 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#13035 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#13036 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#13037 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#13038 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#13039 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#13040 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#13041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13042 = ADVANCED_FACE('',(#13043),#1789,.T.);+#13043 = FACE_BOUND('',#13044,.T.);+#13044 = EDGE_LOOP('',(#13045,#13067,#13068,#13069));+#13045 = ORIENTED_EDGE('',*,*,#13046,.T.);+#13046 = EDGE_CURVE('',#12646,#1746,#13047,.T.);+#13047 = SURFACE_CURVE('',#13048,(#13053,#13060),.PCURVE_S1.);+#13048 = CIRCLE('',#13049,0.3);+#13049 = AXIS2_PLACEMENT_3D('',#13050,#13051,#13052);+#13050 = CARTESIAN_POINT('',(-2.25,-2.11,0.725));+#13051 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#13052 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#13053 = PCURVE('',#1789,#13054);+#13054 = DEFINITIONAL_REPRESENTATION('',(#13055),#13059);+#13055 = LINE('',#13056,#13057);+#13056 = CARTESIAN_POINT('',(6.28318530718,0.));+#13057 = VECTOR('',#13058,1.);+#13058 = DIRECTION('',(-1.,0.));+#13059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13060 = PCURVE('',#1761,#13061);+#13061 = DEFINITIONAL_REPRESENTATION('',(#13062),#13066);+#13062 = CIRCLE('',#13063,0.3);+#13063 = AXIS2_PLACEMENT_2D('',#13064,#13065);+#13064 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#13065 = DIRECTION('',(0.173648177667,-0.984807753012));+#13066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13067 = ORIENTED_EDGE('',*,*,#1773,.T.);+#13068 = ORIENTED_EDGE('',*,*,#12595,.F.);+#13069 = ORIENTED_EDGE('',*,*,#12645,.F.);+#13070 = ADVANCED_FACE('',(#13071),#1761,.F.);+#13071 = FACE_BOUND('',#13072,.F.);+#13072 = EDGE_LOOP('',(#13073,#13094,#13115,#13116,#13117,#13118,#13119,+ #13120,#13121,#13122,#13123,#13124));+#13073 = ORIENTED_EDGE('',*,*,#13074,.F.);+#13074 = EDGE_CURVE('',#459,#1723,#13075,.T.);+#13075 = SURFACE_CURVE('',#13076,(#13080,#13087),.PCURVE_S1.);+#13076 = LINE('',#13077,#13078);+#13077 = CARTESIAN_POINT('',(-1.95,-2.11,0.786976568901));+#13078 = VECTOR('',#13079,1.);+#13079 = DIRECTION('',(0.,0.,1.));+#13080 = PCURVE('',#1761,#13081);+#13081 = DEFINITIONAL_REPRESENTATION('',(#13082),#13086);+#13082 = LINE('',#13083,#13084);+#13083 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#13084 = VECTOR('',#13085,1.);+#13085 = DIRECTION('',(1.,0.));+#13086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13087 = PCURVE('',#502,#13088);+#13088 = DEFINITIONAL_REPRESENTATION('',(#13089),#13093);+#13089 = LINE('',#13090,#13091);+#13090 = CARTESIAN_POINT('',(0.165,-0.238023431099));+#13091 = VECTOR('',#13092,1.);+#13092 = DIRECTION('',(0.,1.));+#13093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13094 = ORIENTED_EDGE('',*,*,#13095,.T.);+#13095 = EDGE_CURVE('',#459,#12993,#13096,.T.);+#13096 = SURFACE_CURVE('',#13097,(#13101,#13108),.PCURVE_S1.);+#13097 = LINE('',#13098,#13099);+#13098 = CARTESIAN_POINT('',(-1.8,-2.11,0.825));+#13099 = VECTOR('',#13100,1.);+#13100 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#13101 = PCURVE('',#1761,#13102);+#13102 = DEFINITIONAL_REPRESENTATION('',(#13103),#13107);+#13103 = LINE('',#13104,#13105);+#13104 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#13105 = VECTOR('',#13106,1.);+#13106 = DIRECTION('',(0.,-1.));+#13107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13108 = PCURVE('',#474,#13109);+#13109 = DEFINITIONAL_REPRESENTATION('',(#13110),#13114);+#13110 = LINE('',#13111,#13112);+#13111 = CARTESIAN_POINT('',(0.,0.));+#13112 = VECTOR('',#13113,1.);+#13113 = DIRECTION('',(1.,0.));+#13114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13115 = ORIENTED_EDGE('',*,*,#13017,.T.);+#13116 = ORIENTED_EDGE('',*,*,#12968,.T.);+#13117 = ORIENTED_EDGE('',*,*,#12893,.T.);+#13118 = ORIENTED_EDGE('',*,*,#12869,.T.);+#13119 = ORIENTED_EDGE('',*,*,#12820,.T.);+#13120 = ORIENTED_EDGE('',*,*,#12771,.T.);+#13121 = ORIENTED_EDGE('',*,*,#12717,.T.);+#13122 = ORIENTED_EDGE('',*,*,#12668,.T.);+#13123 = ORIENTED_EDGE('',*,*,#13046,.T.);+#13124 = ORIENTED_EDGE('',*,*,#1745,.T.);+#13125 = ADVANCED_FACE('',(#13126),#1618,.T.);+#13126 = FACE_BOUND('',#13127,.T.);+#13127 = EDGE_LOOP('',(#13128,#13149,#13172,#13205,#13233,#13262,#13290,+ #13318,#13346,#13379,#13407,#13429));+#13128 = ORIENTED_EDGE('',*,*,#13129,.F.);+#13129 = EDGE_CURVE('',#803,#1603,#13130,.T.);+#13130 = SURFACE_CURVE('',#13131,(#13135,#13142),.PCURVE_S1.);+#13131 = LINE('',#13132,#13133);+#13132 = CARTESIAN_POINT('',(1.95,-2.11,0.786976568901));+#13133 = VECTOR('',#13134,1.);+#13134 = DIRECTION('',(0.,0.,1.));+#13135 = PCURVE('',#1618,#13136);+#13136 = DEFINITIONAL_REPRESENTATION('',(#13137),#13141);+#13137 = LINE('',#13138,#13139);+#13138 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#13139 = VECTOR('',#13140,1.);+#13140 = DIRECTION('',(1.,0.));+#13141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13142 = PCURVE('',#818,#13143);+#13143 = DEFINITIONAL_REPRESENTATION('',(#13144),#13148);+#13144 = LINE('',#13145,#13146);+#13145 = CARTESIAN_POINT('',(4.385,-0.238023431099));+#13146 = VECTOR('',#13147,1.);+#13147 = DIRECTION('',(0.,1.));+#13148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13149 = ORIENTED_EDGE('',*,*,#13150,.T.);+#13150 = EDGE_CURVE('',#803,#13151,#13153,.T.);+#13151 = VERTEX_POINT('',#13152);+#13152 = CARTESIAN_POINT('',(2.25,-2.11,0.825));+#13153 = SURFACE_CURVE('',#13154,(#13158,#13165),.PCURVE_S1.);+#13154 = LINE('',#13155,#13156);+#13155 = CARTESIAN_POINT('',(1.8,-2.11,0.825));+#13156 = VECTOR('',#13157,1.);+#13157 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13158 = PCURVE('',#1618,#13159);+#13159 = DEFINITIONAL_REPRESENTATION('',(#13160),#13164);+#13160 = LINE('',#13161,#13162);+#13161 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#13162 = VECTOR('',#13163,1.);+#13163 = DIRECTION('',(0.,-1.));+#13164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13165 = PCURVE('',#846,#13166);+#13166 = DEFINITIONAL_REPRESENTATION('',(#13167),#13171);+#13167 = LINE('',#13168,#13169);+#13168 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#13169 = VECTOR('',#13170,1.);+#13170 = DIRECTION('',(1.,0.));+#13171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13172 = ORIENTED_EDGE('',*,*,#13173,.T.);+#13173 = EDGE_CURVE('',#13151,#13174,#13176,.T.);+#13174 = VERTEX_POINT('',#13175);+#13175 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.742364817767));+#13176 = SURFACE_CURVE('',#13177,(#13182,#13193),.PCURVE_S1.);+#13177 = CIRCLE('',#13178,0.1);+#13178 = AXIS2_PLACEMENT_3D('',#13179,#13180,#13181);+#13179 = CARTESIAN_POINT('',(2.25,-2.11,0.725));+#13180 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#13181 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#13182 = PCURVE('',#1618,#13183);+#13183 = DEFINITIONAL_REPRESENTATION('',(#13184),#13192);+#13184 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13185,#13186,#13187,#13188+ ,#13189,#13190,#13191),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13185 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#13186 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#13187 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#13188 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#13189 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#13190 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#13191 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#13192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13193 = PCURVE('',#13194,#13199);+#13194 = CYLINDRICAL_SURFACE('',#13195,0.1);+#13195 = AXIS2_PLACEMENT_3D('',#13196,#13197,#13198);+#13196 = CARTESIAN_POINT('',(2.25,-1.7,0.725));+#13197 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#13198 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#13199 = DEFINITIONAL_REPRESENTATION('',(#13200),#13204);+#13200 = LINE('',#13201,#13202);+#13201 = CARTESIAN_POINT('',(0.,-0.41));+#13202 = VECTOR('',#13203,1.);+#13203 = DIRECTION('',(1.,0.));+#13204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13205 = ORIENTED_EDGE('',*,*,#13206,.T.);+#13206 = EDGE_CURVE('',#13174,#13207,#13209,.T.);+#13207 = VERTEX_POINT('',#13208);+#13208 = CARTESIAN_POINT('',(2.429496640897,-2.11,0.2479055467));+#13209 = SURFACE_CURVE('',#13210,(#13214,#13221),.PCURVE_S1.);+#13210 = LINE('',#13211,#13212);+#13211 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.742364817767));+#13212 = VECTOR('',#13213,1.);+#13213 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#13214 = PCURVE('',#1618,#13215);+#13215 = DEFINITIONAL_REPRESENTATION('',(#13216),#13220);+#13216 = LINE('',#13217,#13218);+#13217 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#13218 = VECTOR('',#13219,1.);+#13219 = DIRECTION('',(-0.986841372087,-0.161691392282));+#13220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13221 = PCURVE('',#13222,#13227);+#13222 = PLANE('',#13223);+#13223 = AXIS2_PLACEMENT_3D('',#13224,#13225,#13226);+#13224 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767));+#13225 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282)+ );+#13226 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#13227 = DEFINITIONAL_REPRESENTATION('',(#13228),#13232);+#13228 = LINE('',#13229,#13230);+#13229 = CARTESIAN_POINT('',(-7.360053770421E-18,-0.41));+#13230 = VECTOR('',#13231,1.);+#13231 = DIRECTION('',(1.,-1.454264753163E-33));+#13232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13233 = ORIENTED_EDGE('',*,*,#13234,.T.);+#13234 = EDGE_CURVE('',#13207,#13235,#13237,.T.);+#13235 = VERTEX_POINT('',#13236);+#13236 = CARTESIAN_POINT('',(2.724938966801,-2.11,-1.665334536938E-16));+#13237 = SURFACE_CURVE('',#13238,(#13243,#13250),.PCURVE_S1.);+#13238 = CIRCLE('',#13239,0.3);+#13239 = AXIS2_PLACEMENT_3D('',#13240,#13241,#13242);+#13240 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.3));+#13241 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13242 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#13243 = PCURVE('',#1618,#13244);+#13244 = DEFINITIONAL_REPRESENTATION('',(#13245),#13249);+#13245 = CIRCLE('',#13246,0.3);+#13246 = AXIS2_PLACEMENT_2D('',#13247,#13248);+#13247 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#13248 = DIRECTION('',(-0.173648177667,0.984807753012));+#13249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13250 = PCURVE('',#13251,#13256);+#13251 = CYLINDRICAL_SURFACE('',#13252,0.3);+#13252 = AXIS2_PLACEMENT_3D('',#13253,#13254,#13255);+#13253 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3));+#13254 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#13255 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#13256 = DEFINITIONAL_REPRESENTATION('',(#13257),#13261);+#13257 = LINE('',#13258,#13259);+#13258 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#13259 = VECTOR('',#13260,1.);+#13260 = DIRECTION('',(-1.,0.));+#13261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13262 = ORIENTED_EDGE('',*,*,#13263,.T.);+#13263 = EDGE_CURVE('',#13235,#13264,#13266,.T.);+#13264 = VERTEX_POINT('',#13265);+#13265 = CARTESIAN_POINT('',(3.,-2.11,-1.665334536938E-16));+#13266 = SURFACE_CURVE('',#13267,(#13271,#13278),.PCURVE_S1.);+#13267 = LINE('',#13268,#13269);+#13268 = CARTESIAN_POINT('',(2.724938966801,-2.11,-1.665334536938E-16));+#13269 = VECTOR('',#13270,1.);+#13270 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13271 = PCURVE('',#1618,#13272);+#13272 = DEFINITIONAL_REPRESENTATION('',(#13273),#13277);+#13273 = LINE('',#13274,#13275);+#13274 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#13275 = VECTOR('',#13276,1.);+#13276 = DIRECTION('',(0.,-1.));+#13277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13278 = PCURVE('',#13279,#13284);+#13279 = PLANE('',#13280);+#13280 = AXIS2_PLACEMENT_3D('',#13281,#13282,#13283);+#13281 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16));+#13282 = DIRECTION('',(0.,0.,1.));+#13283 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#13284 = DEFINITIONAL_REPRESENTATION('',(#13285),#13289);+#13285 = LINE('',#13286,#13287);+#13286 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#13287 = VECTOR('',#13288,1.);+#13288 = DIRECTION('',(1.,0.));+#13289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13290 = ORIENTED_EDGE('',*,*,#13291,.T.);+#13291 = EDGE_CURVE('',#13264,#13292,#13294,.T.);+#13292 = VERTEX_POINT('',#13293);+#13293 = CARTESIAN_POINT('',(3.,-2.11,0.2));+#13294 = SURFACE_CURVE('',#13295,(#13299,#13306),.PCURVE_S1.);+#13295 = LINE('',#13296,#13297);+#13296 = CARTESIAN_POINT('',(3.,-2.11,-1.665334536938E-16));+#13297 = VECTOR('',#13298,1.);+#13298 = DIRECTION('',(0.,0.,1.));+#13299 = PCURVE('',#1618,#13300);+#13300 = DEFINITIONAL_REPRESENTATION('',(#13301),#13305);+#13301 = LINE('',#13302,#13303);+#13302 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#13303 = VECTOR('',#13304,1.);+#13304 = DIRECTION('',(1.,0.));+#13305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13306 = PCURVE('',#13307,#13312);+#13307 = PLANE('',#13308);+#13308 = AXIS2_PLACEMENT_3D('',#13309,#13310,#13311);+#13309 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16));+#13310 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13311 = DIRECTION('',(0.,0.,1.));+#13312 = DEFINITIONAL_REPRESENTATION('',(#13313),#13317);+#13313 = LINE('',#13314,#13315);+#13314 = CARTESIAN_POINT('',(0.,-0.41));+#13315 = VECTOR('',#13316,1.);+#13316 = DIRECTION('',(1.,0.));+#13317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13318 = ORIENTED_EDGE('',*,*,#13319,.T.);+#13319 = EDGE_CURVE('',#13292,#13320,#13322,.T.);+#13320 = VERTEX_POINT('',#13321);+#13321 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.2));+#13322 = SURFACE_CURVE('',#13323,(#13327,#13334),.PCURVE_S1.);+#13323 = LINE('',#13324,#13325);+#13324 = CARTESIAN_POINT('',(3.,-2.11,0.2));+#13325 = VECTOR('',#13326,1.);+#13326 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13327 = PCURVE('',#1618,#13328);+#13328 = DEFINITIONAL_REPRESENTATION('',(#13329),#13333);+#13329 = LINE('',#13330,#13331);+#13330 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#13331 = VECTOR('',#13332,1.);+#13332 = DIRECTION('',(0.,1.));+#13333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13334 = PCURVE('',#13335,#13340);+#13335 = PLANE('',#13336);+#13336 = AXIS2_PLACEMENT_3D('',#13337,#13338,#13339);+#13337 = CARTESIAN_POINT('',(3.,-1.7,0.2));+#13338 = DIRECTION('',(0.,0.,-1.));+#13339 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#13340 = DEFINITIONAL_REPRESENTATION('',(#13341),#13345);+#13341 = LINE('',#13342,#13343);+#13342 = CARTESIAN_POINT('',(4.551914400962E-17,-0.41));+#13343 = VECTOR('',#13344,1.);+#13344 = DIRECTION('',(1.,0.));+#13345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13346 = ORIENTED_EDGE('',*,*,#13347,.T.);+#13347 = EDGE_CURVE('',#13320,#13348,#13350,.T.);+#13348 = VERTEX_POINT('',#13349);+#13349 = CARTESIAN_POINT('',(2.6264581915,-2.11,0.282635182233));+#13350 = SURFACE_CURVE('',#13351,(#13356,#13367),.PCURVE_S1.);+#13351 = CIRCLE('',#13352,0.1);+#13352 = AXIS2_PLACEMENT_3D('',#13353,#13354,#13355);+#13353 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.3));+#13354 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#13355 = DIRECTION('',(0.,0.,-1.));+#13356 = PCURVE('',#1618,#13357);+#13357 = DEFINITIONAL_REPRESENTATION('',(#13358),#13366);+#13358 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13359,#13360,#13361,#13362+ ,#13363,#13364,#13365),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13359 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#13360 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#13361 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#13362 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#13363 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#13364 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#13365 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#13366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13367 = PCURVE('',#13368,#13373);+#13368 = CYLINDRICAL_SURFACE('',#13369,0.1);+#13369 = AXIS2_PLACEMENT_3D('',#13370,#13371,#13372);+#13370 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3));+#13371 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#13372 = DIRECTION('',(0.,0.,-1.));+#13373 = DEFINITIONAL_REPRESENTATION('',(#13374),#13378);+#13374 = LINE('',#13375,#13376);+#13375 = CARTESIAN_POINT('',(0.,-0.41));+#13376 = VECTOR('',#13377,1.);+#13377 = DIRECTION('',(1.,0.));+#13378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13379 = ORIENTED_EDGE('',*,*,#13380,.T.);+#13380 = EDGE_CURVE('',#13348,#13381,#13383,.T.);+#13381 = VERTEX_POINT('',#13382);+#13382 = CARTESIAN_POINT('',(2.545442325904,-2.11,0.7770944533));+#13383 = SURFACE_CURVE('',#13384,(#13388,#13395),.PCURVE_S1.);+#13384 = LINE('',#13385,#13386);+#13385 = CARTESIAN_POINT('',(2.6264581915,-2.11,0.282635182233));+#13386 = VECTOR('',#13387,1.);+#13387 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#13388 = PCURVE('',#1618,#13389);+#13389 = DEFINITIONAL_REPRESENTATION('',(#13390),#13394);+#13390 = LINE('',#13391,#13392);+#13391 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#13392 = VECTOR('',#13393,1.);+#13393 = DIRECTION('',(0.986841372087,0.161691392282));+#13394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13395 = PCURVE('',#13396,#13401);+#13396 = PLANE('',#13397);+#13397 = AXIS2_PLACEMENT_3D('',#13398,#13399,#13400);+#13398 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233));+#13399 = DIRECTION('',(-0.986841372087,-1.095614012943E-16,+ -0.161691392282));+#13400 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#13401 = DEFINITIONAL_REPRESENTATION('',(#13402),#13406);+#13402 = LINE('',#13403,#13404);+#13403 = CARTESIAN_POINT('',(7.360053770421E-18,-0.41));+#13404 = VECTOR('',#13405,1.);+#13405 = DIRECTION('',(1.,1.454264753163E-33));+#13406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13407 = ORIENTED_EDGE('',*,*,#13408,.T.);+#13408 = EDGE_CURVE('',#13381,#1575,#13409,.T.);+#13409 = SURFACE_CURVE('',#13410,(#13415,#13422),.PCURVE_S1.);+#13410 = CIRCLE('',#13411,0.3);+#13411 = AXIS2_PLACEMENT_3D('',#13412,#13413,#13414);+#13412 = CARTESIAN_POINT('',(2.25,-2.11,0.725));+#13413 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13414 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#13415 = PCURVE('',#1618,#13416);+#13416 = DEFINITIONAL_REPRESENTATION('',(#13417),#13421);+#13417 = CIRCLE('',#13418,0.3);+#13418 = AXIS2_PLACEMENT_2D('',#13419,#13420);+#13419 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#13420 = DIRECTION('',(0.173648177667,-0.984807753012));+#13421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13422 = PCURVE('',#1590,#13423);+#13423 = DEFINITIONAL_REPRESENTATION('',(#13424),#13428);+#13424 = LINE('',#13425,#13426);+#13425 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#13426 = VECTOR('',#13427,1.);+#13427 = DIRECTION('',(-1.,0.));+#13428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13429 = ORIENTED_EDGE('',*,*,#1602,.T.);+#13430 = ADVANCED_FACE('',(#13431),#13396,.F.);+#13431 = FACE_BOUND('',#13432,.F.);+#13432 = EDGE_LOOP('',(#13433,#13456,#13457,#13480));+#13433 = ORIENTED_EDGE('',*,*,#13434,.T.);+#13434 = EDGE_CURVE('',#13435,#13348,#13437,.T.);+#13435 = VERTEX_POINT('',#13436);+#13436 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233));+#13437 = SURFACE_CURVE('',#13438,(#13442,#13449),.PCURVE_S1.);+#13438 = LINE('',#13439,#13440);+#13439 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233));+#13440 = VECTOR('',#13441,1.);+#13441 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13442 = PCURVE('',#13396,#13443);+#13443 = DEFINITIONAL_REPRESENTATION('',(#13444),#13448);+#13444 = LINE('',#13445,#13446);+#13445 = CARTESIAN_POINT('',(0.,0.));+#13446 = VECTOR('',#13447,1.);+#13447 = DIRECTION('',(5.505756095676E-29,-1.));+#13448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13449 = PCURVE('',#13368,#13450);+#13450 = DEFINITIONAL_REPRESENTATION('',(#13451),#13455);+#13451 = LINE('',#13452,#13453);+#13452 = CARTESIAN_POINT('',(1.396263401592,0.));+#13453 = VECTOR('',#13454,1.);+#13454 = DIRECTION('',(1.624716621403E-15,-1.));+#13455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13456 = ORIENTED_EDGE('',*,*,#13380,.T.);+#13457 = ORIENTED_EDGE('',*,*,#13458,.F.);+#13458 = EDGE_CURVE('',#13459,#13381,#13461,.T.);+#13459 = VERTEX_POINT('',#13460);+#13460 = CARTESIAN_POINT('',(2.545442325904,-1.7,0.7770944533));+#13461 = SURFACE_CURVE('',#13462,(#13466,#13473),.PCURVE_S1.);+#13462 = LINE('',#13463,#13464);+#13463 = CARTESIAN_POINT('',(2.545442325904,-1.7,0.7770944533));+#13464 = VECTOR('',#13465,1.);+#13465 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13466 = PCURVE('',#13396,#13467);+#13467 = DEFINITIONAL_REPRESENTATION('',(#13468),#13472);+#13468 = LINE('',#13469,#13470);+#13469 = CARTESIAN_POINT('',(0.501052433606,8.994567934487E-18));+#13470 = VECTOR('',#13471,1.);+#13471 = DIRECTION('',(5.505756095676E-29,-1.));+#13472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13473 = PCURVE('',#1590,#13474);+#13474 = DEFINITIONAL_REPRESENTATION('',(#13475),#13479);+#13475 = LINE('',#13476,#13477);+#13476 = CARTESIAN_POINT('',(6.28318530718,0.));+#13477 = VECTOR('',#13478,1.);+#13478 = DIRECTION('',(0.,-1.));+#13479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13480 = ORIENTED_EDGE('',*,*,#13481,.F.);+#13481 = EDGE_CURVE('',#13435,#13459,#13482,.T.);+#13482 = SURFACE_CURVE('',#13483,(#13487,#13494),.PCURVE_S1.);+#13483 = LINE('',#13484,#13485);+#13484 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233));+#13485 = VECTOR('',#13486,1.);+#13486 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#13487 = PCURVE('',#13396,#13488);+#13488 = DEFINITIONAL_REPRESENTATION('',(#13489),#13493);+#13489 = LINE('',#13490,#13491);+#13490 = CARTESIAN_POINT('',(0.,0.));+#13491 = VECTOR('',#13492,1.);+#13492 = DIRECTION('',(1.,1.454264753163E-33));+#13493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13494 = PCURVE('',#1562,#13495);+#13495 = DEFINITIONAL_REPRESENTATION('',(#13496),#13500);+#13496 = LINE('',#13497,#13498);+#13497 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#13498 = VECTOR('',#13499,1.);+#13499 = DIRECTION('',(0.986841372087,0.161691392282));+#13500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13501 = ADVANCED_FACE('',(#13502),#13368,.F.);+#13502 = FACE_BOUND('',#13503,.F.);+#13503 = EDGE_LOOP('',(#13504,#13527,#13528,#13529));+#13504 = ORIENTED_EDGE('',*,*,#13505,.T.);+#13505 = EDGE_CURVE('',#13506,#13320,#13508,.T.);+#13506 = VERTEX_POINT('',#13507);+#13507 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.2));+#13508 = SURFACE_CURVE('',#13509,(#13513,#13520),.PCURVE_S1.);+#13509 = LINE('',#13510,#13511);+#13510 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.2));+#13511 = VECTOR('',#13512,1.);+#13512 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13513 = PCURVE('',#13368,#13514);+#13514 = DEFINITIONAL_REPRESENTATION('',(#13515),#13519);+#13515 = LINE('',#13516,#13517);+#13516 = CARTESIAN_POINT('',(0.,0.));+#13517 = VECTOR('',#13518,1.);+#13518 = DIRECTION('',(0.,-1.));+#13519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13520 = PCURVE('',#13335,#13521);+#13521 = DEFINITIONAL_REPRESENTATION('',(#13522),#13526);+#13522 = LINE('',#13523,#13524);+#13523 = CARTESIAN_POINT('',(0.275061033199,3.053790922347E-17));+#13524 = VECTOR('',#13525,1.);+#13525 = DIRECTION('',(0.,-1.));+#13526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13527 = ORIENTED_EDGE('',*,*,#13347,.T.);+#13528 = ORIENTED_EDGE('',*,*,#13434,.F.);+#13529 = ORIENTED_EDGE('',*,*,#13530,.F.);+#13530 = EDGE_CURVE('',#13506,#13435,#13531,.T.);+#13531 = SURFACE_CURVE('',#13532,(#13537,#13544),.PCURVE_S1.);+#13532 = CIRCLE('',#13533,0.1);+#13533 = AXIS2_PLACEMENT_3D('',#13534,#13535,#13536);+#13534 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3));+#13535 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#13536 = DIRECTION('',(0.,0.,-1.));+#13537 = PCURVE('',#13368,#13538);+#13538 = DEFINITIONAL_REPRESENTATION('',(#13539),#13543);+#13539 = LINE('',#13540,#13541);+#13540 = CARTESIAN_POINT('',(0.,0.));+#13541 = VECTOR('',#13542,1.);+#13542 = DIRECTION('',(1.,0.));+#13543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13544 = PCURVE('',#1562,#13545);+#13545 = DEFINITIONAL_REPRESENTATION('',(#13546),#13554);+#13546 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13547,#13548,#13549,#13550+ ,#13551,#13552,#13553),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13547 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#13548 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#13549 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#13550 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#13551 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#13552 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#13553 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#13554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13555 = ADVANCED_FACE('',(#13556),#13335,.F.);+#13556 = FACE_BOUND('',#13557,.F.);+#13557 = EDGE_LOOP('',(#13558,#13581,#13582,#13583));+#13558 = ORIENTED_EDGE('',*,*,#13559,.T.);+#13559 = EDGE_CURVE('',#13560,#13292,#13562,.T.);+#13560 = VERTEX_POINT('',#13561);+#13561 = CARTESIAN_POINT('',(3.,-1.7,0.2));+#13562 = SURFACE_CURVE('',#13563,(#13567,#13574),.PCURVE_S1.);+#13563 = LINE('',#13564,#13565);+#13564 = CARTESIAN_POINT('',(3.,-1.7,0.2));+#13565 = VECTOR('',#13566,1.);+#13566 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13567 = PCURVE('',#13335,#13568);+#13568 = DEFINITIONAL_REPRESENTATION('',(#13569),#13573);+#13569 = LINE('',#13570,#13571);+#13570 = CARTESIAN_POINT('',(-0.,0.));+#13571 = VECTOR('',#13572,1.);+#13572 = DIRECTION('',(0.,-1.));+#13573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13574 = PCURVE('',#13307,#13575);+#13575 = DEFINITIONAL_REPRESENTATION('',(#13576),#13580);+#13576 = LINE('',#13577,#13578);+#13577 = CARTESIAN_POINT('',(0.2,0.));+#13578 = VECTOR('',#13579,1.);+#13579 = DIRECTION('',(0.,-1.));+#13580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13581 = ORIENTED_EDGE('',*,*,#13319,.T.);+#13582 = ORIENTED_EDGE('',*,*,#13505,.F.);+#13583 = ORIENTED_EDGE('',*,*,#13584,.F.);+#13584 = EDGE_CURVE('',#13560,#13506,#13585,.T.);+#13585 = SURFACE_CURVE('',#13586,(#13590,#13597),.PCURVE_S1.);+#13586 = LINE('',#13587,#13588);+#13587 = CARTESIAN_POINT('',(3.,-1.7,0.2));+#13588 = VECTOR('',#13589,1.);+#13589 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13590 = PCURVE('',#13335,#13591);+#13591 = DEFINITIONAL_REPRESENTATION('',(#13592),#13596);+#13592 = LINE('',#13593,#13594);+#13593 = CARTESIAN_POINT('',(-0.,0.));+#13594 = VECTOR('',#13595,1.);+#13595 = DIRECTION('',(1.,0.));+#13596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13597 = PCURVE('',#1562,#13598);+#13598 = DEFINITIONAL_REPRESENTATION('',(#13599),#13603);+#13599 = LINE('',#13600,#13601);+#13600 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#13601 = VECTOR('',#13602,1.);+#13602 = DIRECTION('',(0.,1.));+#13603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13604 = ADVANCED_FACE('',(#13605),#13307,.F.);+#13605 = FACE_BOUND('',#13606,.F.);+#13606 = EDGE_LOOP('',(#13607,#13630,#13631,#13632));+#13607 = ORIENTED_EDGE('',*,*,#13608,.T.);+#13608 = EDGE_CURVE('',#13609,#13264,#13611,.T.);+#13609 = VERTEX_POINT('',#13610);+#13610 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16));+#13611 = SURFACE_CURVE('',#13612,(#13616,#13623),.PCURVE_S1.);+#13612 = LINE('',#13613,#13614);+#13613 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16));+#13614 = VECTOR('',#13615,1.);+#13615 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13616 = PCURVE('',#13307,#13617);+#13617 = DEFINITIONAL_REPRESENTATION('',(#13618),#13622);+#13618 = LINE('',#13619,#13620);+#13619 = CARTESIAN_POINT('',(0.,0.));+#13620 = VECTOR('',#13621,1.);+#13621 = DIRECTION('',(0.,-1.));+#13622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13623 = PCURVE('',#13279,#13624);+#13624 = DEFINITIONAL_REPRESENTATION('',(#13625),#13629);+#13625 = LINE('',#13626,#13627);+#13626 = CARTESIAN_POINT('',(0.275061033199,-3.053790922347E-17));+#13627 = VECTOR('',#13628,1.);+#13628 = DIRECTION('',(0.,-1.));+#13629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13630 = ORIENTED_EDGE('',*,*,#13291,.T.);+#13631 = ORIENTED_EDGE('',*,*,#13559,.F.);+#13632 = ORIENTED_EDGE('',*,*,#13633,.F.);+#13633 = EDGE_CURVE('',#13609,#13560,#13634,.T.);+#13634 = SURFACE_CURVE('',#13635,(#13639,#13646),.PCURVE_S1.);+#13635 = LINE('',#13636,#13637);+#13636 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16));+#13637 = VECTOR('',#13638,1.);+#13638 = DIRECTION('',(0.,0.,1.));+#13639 = PCURVE('',#13307,#13640);+#13640 = DEFINITIONAL_REPRESENTATION('',(#13641),#13645);+#13641 = LINE('',#13642,#13643);+#13642 = CARTESIAN_POINT('',(0.,0.));+#13643 = VECTOR('',#13644,1.);+#13644 = DIRECTION('',(1.,0.));+#13645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13646 = PCURVE('',#1562,#13647);+#13647 = DEFINITIONAL_REPRESENTATION('',(#13648),#13652);+#13648 = LINE('',#13649,#13650);+#13649 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#13650 = VECTOR('',#13651,1.);+#13651 = DIRECTION('',(1.,0.));+#13652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13653 = ADVANCED_FACE('',(#13654),#13279,.F.);+#13654 = FACE_BOUND('',#13655,.F.);+#13655 = EDGE_LOOP('',(#13656,#13679,#13680,#13681));+#13656 = ORIENTED_EDGE('',*,*,#13657,.T.);+#13657 = EDGE_CURVE('',#13658,#13235,#13660,.T.);+#13658 = VERTEX_POINT('',#13659);+#13659 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16));+#13660 = SURFACE_CURVE('',#13661,(#13665,#13672),.PCURVE_S1.);+#13661 = LINE('',#13662,#13663);+#13662 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16));+#13663 = VECTOR('',#13664,1.);+#13664 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13665 = PCURVE('',#13279,#13666);+#13666 = DEFINITIONAL_REPRESENTATION('',(#13667),#13671);+#13667 = LINE('',#13668,#13669);+#13668 = CARTESIAN_POINT('',(0.,0.));+#13669 = VECTOR('',#13670,1.);+#13670 = DIRECTION('',(0.,-1.));+#13671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13672 = PCURVE('',#13251,#13673);+#13673 = DEFINITIONAL_REPRESENTATION('',(#13674),#13678);+#13674 = LINE('',#13675,#13676);+#13675 = CARTESIAN_POINT('',(4.886921905584,0.));+#13676 = VECTOR('',#13677,1.);+#13677 = DIRECTION('',(4.332577657074E-15,-1.));+#13678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13679 = ORIENTED_EDGE('',*,*,#13263,.T.);+#13680 = ORIENTED_EDGE('',*,*,#13608,.F.);+#13681 = ORIENTED_EDGE('',*,*,#13682,.F.);+#13682 = EDGE_CURVE('',#13658,#13609,#13683,.T.);+#13683 = SURFACE_CURVE('',#13684,(#13688,#13695),.PCURVE_S1.);+#13684 = LINE('',#13685,#13686);+#13685 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16));+#13686 = VECTOR('',#13687,1.);+#13687 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13688 = PCURVE('',#13279,#13689);+#13689 = DEFINITIONAL_REPRESENTATION('',(#13690),#13694);+#13690 = LINE('',#13691,#13692);+#13691 = CARTESIAN_POINT('',(0.,0.));+#13692 = VECTOR('',#13693,1.);+#13693 = DIRECTION('',(1.,0.));+#13694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13695 = PCURVE('',#1562,#13696);+#13696 = DEFINITIONAL_REPRESENTATION('',(#13697),#13701);+#13697 = LINE('',#13698,#13699);+#13698 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#13699 = VECTOR('',#13700,1.);+#13700 = DIRECTION('',(0.,-1.));+#13701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13702 = ADVANCED_FACE('',(#13703),#13251,.T.);+#13703 = FACE_BOUND('',#13704,.T.);+#13704 = EDGE_LOOP('',(#13705,#13729,#13730,#13731));+#13705 = ORIENTED_EDGE('',*,*,#13706,.T.);+#13706 = EDGE_CURVE('',#13707,#13658,#13709,.T.);+#13707 = VERTEX_POINT('',#13708);+#13708 = CARTESIAN_POINT('',(2.429496640897,-1.7,0.2479055467));+#13709 = SURFACE_CURVE('',#13710,(#13715,#13722),.PCURVE_S1.);+#13710 = CIRCLE('',#13711,0.3);+#13711 = AXIS2_PLACEMENT_3D('',#13712,#13713,#13714);+#13712 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3));+#13713 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13714 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#13715 = PCURVE('',#13251,#13716);+#13716 = DEFINITIONAL_REPRESENTATION('',(#13717),#13721);+#13717 = LINE('',#13718,#13719);+#13718 = CARTESIAN_POINT('',(6.28318530718,0.));+#13719 = VECTOR('',#13720,1.);+#13720 = DIRECTION('',(-1.,0.));+#13721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13722 = PCURVE('',#1562,#13723);+#13723 = DEFINITIONAL_REPRESENTATION('',(#13724),#13728);+#13724 = CIRCLE('',#13725,0.3);+#13725 = AXIS2_PLACEMENT_2D('',#13726,#13727);+#13726 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#13727 = DIRECTION('',(-0.173648177667,0.984807753012));+#13728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13729 = ORIENTED_EDGE('',*,*,#13657,.T.);+#13730 = ORIENTED_EDGE('',*,*,#13234,.F.);+#13731 = ORIENTED_EDGE('',*,*,#13732,.F.);+#13732 = EDGE_CURVE('',#13707,#13207,#13733,.T.);+#13733 = SURFACE_CURVE('',#13734,(#13738,#13745),.PCURVE_S1.);+#13734 = LINE('',#13735,#13736);+#13735 = CARTESIAN_POINT('',(2.429496640897,-1.7,0.2479055467));+#13736 = VECTOR('',#13737,1.);+#13737 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13738 = PCURVE('',#13251,#13739);+#13739 = DEFINITIONAL_REPRESENTATION('',(#13740),#13744);+#13740 = LINE('',#13741,#13742);+#13741 = CARTESIAN_POINT('',(6.28318530718,0.));+#13742 = VECTOR('',#13743,1.);+#13743 = DIRECTION('',(0.,-1.));+#13744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13745 = PCURVE('',#13222,#13746);+#13746 = DEFINITIONAL_REPRESENTATION('',(#13747),#13751);+#13747 = LINE('',#13748,#13749);+#13748 = CARTESIAN_POINT('',(0.501052433606,-8.994567934487E-18));+#13749 = VECTOR('',#13750,1.);+#13750 = DIRECTION('',(-5.505756095676E-29,-1.));+#13751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13752 = ADVANCED_FACE('',(#13753),#13222,.F.);+#13753 = FACE_BOUND('',#13754,.F.);+#13754 = EDGE_LOOP('',(#13755,#13778,#13779,#13780));+#13755 = ORIENTED_EDGE('',*,*,#13756,.T.);+#13756 = EDGE_CURVE('',#13757,#13174,#13759,.T.);+#13757 = VERTEX_POINT('',#13758);+#13758 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767));+#13759 = SURFACE_CURVE('',#13760,(#13764,#13771),.PCURVE_S1.);+#13760 = LINE('',#13761,#13762);+#13761 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767));+#13762 = VECTOR('',#13763,1.);+#13763 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13764 = PCURVE('',#13222,#13765);+#13765 = DEFINITIONAL_REPRESENTATION('',(#13766),#13770);+#13766 = LINE('',#13767,#13768);+#13767 = CARTESIAN_POINT('',(0.,0.));+#13768 = VECTOR('',#13769,1.);+#13769 = DIRECTION('',(-5.505756095676E-29,-1.));+#13770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13771 = PCURVE('',#13194,#13772);+#13772 = DEFINITIONAL_REPRESENTATION('',(#13773),#13777);+#13773 = LINE('',#13774,#13775);+#13774 = CARTESIAN_POINT('',(1.396263401592,0.));+#13775 = VECTOR('',#13776,1.);+#13776 = DIRECTION('',(-4.332577657074E-15,-1.));+#13777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13778 = ORIENTED_EDGE('',*,*,#13206,.T.);+#13779 = ORIENTED_EDGE('',*,*,#13732,.F.);+#13780 = ORIENTED_EDGE('',*,*,#13781,.F.);+#13781 = EDGE_CURVE('',#13757,#13707,#13782,.T.);+#13782 = SURFACE_CURVE('',#13783,(#13787,#13794),.PCURVE_S1.);+#13783 = LINE('',#13784,#13785);+#13784 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767));+#13785 = VECTOR('',#13786,1.);+#13786 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#13787 = PCURVE('',#13222,#13788);+#13788 = DEFINITIONAL_REPRESENTATION('',(#13789),#13793);+#13789 = LINE('',#13790,#13791);+#13790 = CARTESIAN_POINT('',(0.,0.));+#13791 = VECTOR('',#13792,1.);+#13792 = DIRECTION('',(1.,-1.454264753163E-33));+#13793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13794 = PCURVE('',#1562,#13795);+#13795 = DEFINITIONAL_REPRESENTATION('',(#13796),#13800);+#13796 = LINE('',#13797,#13798);+#13797 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#13798 = VECTOR('',#13799,1.);+#13799 = DIRECTION('',(-0.986841372087,-0.161691392282));+#13800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13801 = ADVANCED_FACE('',(#13802),#13194,.F.);+#13802 = FACE_BOUND('',#13803,.F.);+#13803 = EDGE_LOOP('',(#13804,#13827,#13828,#13829));+#13804 = ORIENTED_EDGE('',*,*,#13805,.T.);+#13805 = EDGE_CURVE('',#13806,#13151,#13808,.T.);+#13806 = VERTEX_POINT('',#13807);+#13807 = CARTESIAN_POINT('',(2.25,-1.7,0.825));+#13808 = SURFACE_CURVE('',#13809,(#13813,#13820),.PCURVE_S1.);+#13809 = LINE('',#13810,#13811);+#13810 = CARTESIAN_POINT('',(2.25,-1.7,0.825));+#13811 = VECTOR('',#13812,1.);+#13812 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13813 = PCURVE('',#13194,#13814);+#13814 = DEFINITIONAL_REPRESENTATION('',(#13815),#13819);+#13815 = LINE('',#13816,#13817);+#13816 = CARTESIAN_POINT('',(0.,0.));+#13817 = VECTOR('',#13818,1.);+#13818 = DIRECTION('',(0.,-1.));+#13819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13820 = PCURVE('',#846,#13821);+#13821 = DEFINITIONAL_REPRESENTATION('',(#13822),#13826);+#13822 = LINE('',#13823,#13824);+#13823 = CARTESIAN_POINT('',(0.45,-4.996003610812E-17));+#13824 = VECTOR('',#13825,1.);+#13825 = DIRECTION('',(0.,-1.));+#13826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13827 = ORIENTED_EDGE('',*,*,#13173,.T.);+#13828 = ORIENTED_EDGE('',*,*,#13756,.F.);+#13829 = ORIENTED_EDGE('',*,*,#13830,.F.);+#13830 = EDGE_CURVE('',#13806,#13757,#13831,.T.);+#13831 = SURFACE_CURVE('',#13832,(#13837,#13844),.PCURVE_S1.);+#13832 = CIRCLE('',#13833,0.1);+#13833 = AXIS2_PLACEMENT_3D('',#13834,#13835,#13836);+#13834 = CARTESIAN_POINT('',(2.25,-1.7,0.725));+#13835 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#13836 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#13837 = PCURVE('',#13194,#13838);+#13838 = DEFINITIONAL_REPRESENTATION('',(#13839),#13843);+#13839 = LINE('',#13840,#13841);+#13840 = CARTESIAN_POINT('',(0.,0.));+#13841 = VECTOR('',#13842,1.);+#13842 = DIRECTION('',(1.,0.));+#13843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13844 = PCURVE('',#1562,#13845);+#13845 = DEFINITIONAL_REPRESENTATION('',(#13846),#13854);+#13846 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13847,#13848,#13849,#13850+ ,#13851,#13852,#13853),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13847 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#13848 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#13849 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#13850 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#13851 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#13852 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#13853 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#13854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13855 = ADVANCED_FACE('',(#13856),#1590,.T.);+#13856 = FACE_BOUND('',#13857,.T.);+#13857 = EDGE_LOOP('',(#13858,#13880,#13881,#13882));+#13858 = ORIENTED_EDGE('',*,*,#13859,.T.);+#13859 = EDGE_CURVE('',#13459,#1547,#13860,.T.);+#13860 = SURFACE_CURVE('',#13861,(#13866,#13873),.PCURVE_S1.);+#13861 = CIRCLE('',#13862,0.3);+#13862 = AXIS2_PLACEMENT_3D('',#13863,#13864,#13865);+#13863 = CARTESIAN_POINT('',(2.25,-1.7,0.725));+#13864 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13865 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#13866 = PCURVE('',#1590,#13867);+#13867 = DEFINITIONAL_REPRESENTATION('',(#13868),#13872);+#13868 = LINE('',#13869,#13870);+#13869 = CARTESIAN_POINT('',(6.28318530718,0.));+#13870 = VECTOR('',#13871,1.);+#13871 = DIRECTION('',(-1.,0.));+#13872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13873 = PCURVE('',#1562,#13874);+#13874 = DEFINITIONAL_REPRESENTATION('',(#13875),#13879);+#13875 = CIRCLE('',#13876,0.3);+#13876 = AXIS2_PLACEMENT_2D('',#13877,#13878);+#13877 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#13878 = DIRECTION('',(0.173648177667,-0.984807753012));+#13879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13880 = ORIENTED_EDGE('',*,*,#1574,.T.);+#13881 = ORIENTED_EDGE('',*,*,#13408,.F.);+#13882 = ORIENTED_EDGE('',*,*,#13458,.F.);+#13883 = ADVANCED_FACE('',(#13884),#1562,.F.);+#13884 = FACE_BOUND('',#13885,.F.);+#13885 = EDGE_LOOP('',(#13886,#13907,#13928,#13929,#13930,#13931,#13932,+ #13933,#13934,#13935,#13936,#13937));+#13886 = ORIENTED_EDGE('',*,*,#13887,.F.);+#13887 = EDGE_CURVE('',#831,#1524,#13888,.T.);+#13888 = SURFACE_CURVE('',#13889,(#13893,#13900),.PCURVE_S1.);+#13889 = LINE('',#13890,#13891);+#13890 = CARTESIAN_POINT('',(1.95,-1.7,0.786976568901));+#13891 = VECTOR('',#13892,1.);+#13892 = DIRECTION('',(0.,0.,1.));+#13893 = PCURVE('',#1562,#13894);+#13894 = DEFINITIONAL_REPRESENTATION('',(#13895),#13899);+#13895 = LINE('',#13896,#13897);+#13896 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#13897 = VECTOR('',#13898,1.);+#13898 = DIRECTION('',(1.,0.));+#13899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13900 = PCURVE('',#874,#13901);+#13901 = DEFINITIONAL_REPRESENTATION('',(#13902),#13906);+#13902 = LINE('',#13903,#13904);+#13903 = CARTESIAN_POINT('',(3.975,-0.238023431099));+#13904 = VECTOR('',#13905,1.);+#13905 = DIRECTION('',(0.,1.));+#13906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13907 = ORIENTED_EDGE('',*,*,#13908,.T.);+#13908 = EDGE_CURVE('',#831,#13806,#13909,.T.);+#13909 = SURFACE_CURVE('',#13910,(#13914,#13921),.PCURVE_S1.);+#13910 = LINE('',#13911,#13912);+#13911 = CARTESIAN_POINT('',(1.8,-1.7,0.825));+#13912 = VECTOR('',#13913,1.);+#13913 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13914 = PCURVE('',#1562,#13915);+#13915 = DEFINITIONAL_REPRESENTATION('',(#13916),#13920);+#13916 = LINE('',#13917,#13918);+#13917 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#13918 = VECTOR('',#13919,1.);+#13919 = DIRECTION('',(0.,-1.));+#13920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13921 = PCURVE('',#846,#13922);+#13922 = DEFINITIONAL_REPRESENTATION('',(#13923),#13927);+#13923 = LINE('',#13924,#13925);+#13924 = CARTESIAN_POINT('',(0.,0.));+#13925 = VECTOR('',#13926,1.);+#13926 = DIRECTION('',(1.,0.));+#13927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13928 = ORIENTED_EDGE('',*,*,#13830,.T.);+#13929 = ORIENTED_EDGE('',*,*,#13781,.T.);+#13930 = ORIENTED_EDGE('',*,*,#13706,.T.);+#13931 = ORIENTED_EDGE('',*,*,#13682,.T.);+#13932 = ORIENTED_EDGE('',*,*,#13633,.T.);+#13933 = ORIENTED_EDGE('',*,*,#13584,.T.);+#13934 = ORIENTED_EDGE('',*,*,#13530,.T.);+#13935 = ORIENTED_EDGE('',*,*,#13481,.T.);+#13936 = ORIENTED_EDGE('',*,*,#13859,.T.);+#13937 = ORIENTED_EDGE('',*,*,#1546,.T.);+#13938 = ADVANCED_FACE('',(#13939),#1511,.T.);+#13939 = FACE_BOUND('',#13940,.T.);+#13940 = EDGE_LOOP('',(#13941,#13962,#13985,#14018,#14046,#14075,#14103,+ #14131,#14159,#14192,#14220,#14242));+#13941 = ORIENTED_EDGE('',*,*,#13942,.F.);+#13942 = EDGE_CURVE('',#859,#1496,#13943,.T.);+#13943 = SURFACE_CURVE('',#13944,(#13948,#13955),.PCURVE_S1.);+#13944 = LINE('',#13945,#13946);+#13945 = CARTESIAN_POINT('',(1.95,-0.84,0.786976568901));+#13946 = VECTOR('',#13947,1.);+#13947 = DIRECTION('',(0.,0.,1.));+#13948 = PCURVE('',#1511,#13949);+#13949 = DEFINITIONAL_REPRESENTATION('',(#13950),#13954);+#13950 = LINE('',#13951,#13952);+#13951 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#13952 = VECTOR('',#13953,1.);+#13953 = DIRECTION('',(1.,0.));+#13954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13955 = PCURVE('',#874,#13956);+#13956 = DEFINITIONAL_REPRESENTATION('',(#13957),#13961);+#13957 = LINE('',#13958,#13959);+#13958 = CARTESIAN_POINT('',(3.115,-0.238023431099));+#13959 = VECTOR('',#13960,1.);+#13960 = DIRECTION('',(0.,1.));+#13961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13962 = ORIENTED_EDGE('',*,*,#13963,.T.);+#13963 = EDGE_CURVE('',#859,#13964,#13966,.T.);+#13964 = VERTEX_POINT('',#13965);+#13965 = CARTESIAN_POINT('',(2.25,-0.84,0.825));+#13966 = SURFACE_CURVE('',#13967,(#13971,#13978),.PCURVE_S1.);+#13967 = LINE('',#13968,#13969);+#13968 = CARTESIAN_POINT('',(1.8,-0.84,0.825));+#13969 = VECTOR('',#13970,1.);+#13970 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13971 = PCURVE('',#1511,#13972);+#13972 = DEFINITIONAL_REPRESENTATION('',(#13973),#13977);+#13973 = LINE('',#13974,#13975);+#13974 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#13975 = VECTOR('',#13976,1.);+#13976 = DIRECTION('',(0.,-1.));+#13977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13978 = PCURVE('',#902,#13979);+#13979 = DEFINITIONAL_REPRESENTATION('',(#13980),#13984);+#13980 = LINE('',#13981,#13982);+#13981 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#13982 = VECTOR('',#13983,1.);+#13983 = DIRECTION('',(1.,0.));+#13984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13985 = ORIENTED_EDGE('',*,*,#13986,.T.);+#13986 = EDGE_CURVE('',#13964,#13987,#13989,.T.);+#13987 = VERTEX_POINT('',#13988);+#13988 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.742364817767));+#13989 = SURFACE_CURVE('',#13990,(#13995,#14006),.PCURVE_S1.);+#13990 = CIRCLE('',#13991,0.1);+#13991 = AXIS2_PLACEMENT_3D('',#13992,#13993,#13994);+#13992 = CARTESIAN_POINT('',(2.25,-0.84,0.725));+#13993 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#13994 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#13995 = PCURVE('',#1511,#13996);+#13996 = DEFINITIONAL_REPRESENTATION('',(#13997),#14005);+#13997 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13998,#13999,#14000,#14001+ ,#14002,#14003,#14004),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13998 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#13999 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#14000 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#14001 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#14002 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#14003 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#14004 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#14005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14006 = PCURVE('',#14007,#14012);+#14007 = CYLINDRICAL_SURFACE('',#14008,0.1);+#14008 = AXIS2_PLACEMENT_3D('',#14009,#14010,#14011);+#14009 = CARTESIAN_POINT('',(2.25,-0.43,0.725));+#14010 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14011 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#14012 = DEFINITIONAL_REPRESENTATION('',(#14013),#14017);+#14013 = LINE('',#14014,#14015);+#14014 = CARTESIAN_POINT('',(0.,-0.41));+#14015 = VECTOR('',#14016,1.);+#14016 = DIRECTION('',(1.,0.));+#14017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14018 = ORIENTED_EDGE('',*,*,#14019,.T.);+#14019 = EDGE_CURVE('',#13987,#14020,#14022,.T.);+#14020 = VERTEX_POINT('',#14021);+#14021 = CARTESIAN_POINT('',(2.429496640897,-0.84,0.2479055467));+#14022 = SURFACE_CURVE('',#14023,(#14027,#14034),.PCURVE_S1.);+#14023 = LINE('',#14024,#14025);+#14024 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.742364817767));+#14025 = VECTOR('',#14026,1.);+#14026 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#14027 = PCURVE('',#1511,#14028);+#14028 = DEFINITIONAL_REPRESENTATION('',(#14029),#14033);+#14029 = LINE('',#14030,#14031);+#14030 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#14031 = VECTOR('',#14032,1.);+#14032 = DIRECTION('',(-0.986841372087,-0.161691392282));+#14033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14034 = PCURVE('',#14035,#14040);+#14035 = PLANE('',#14036);+#14036 = AXIS2_PLACEMENT_3D('',#14037,#14038,#14039);+#14037 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767));+#14038 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282)+ );+#14039 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#14040 = DEFINITIONAL_REPRESENTATION('',(#14041),#14045);+#14041 = LINE('',#14042,#14043);+#14042 = CARTESIAN_POINT('',(-7.360053770421E-18,-0.41));+#14043 = VECTOR('',#14044,1.);+#14044 = DIRECTION('',(1.,-1.454264753163E-33));+#14045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14046 = ORIENTED_EDGE('',*,*,#14047,.T.);+#14047 = EDGE_CURVE('',#14020,#14048,#14050,.T.);+#14048 = VERTEX_POINT('',#14049);+#14049 = CARTESIAN_POINT('',(2.724938966801,-0.84,-1.665334536938E-16));+#14050 = SURFACE_CURVE('',#14051,(#14056,#14063),.PCURVE_S1.);+#14051 = CIRCLE('',#14052,0.3);+#14052 = AXIS2_PLACEMENT_3D('',#14053,#14054,#14055);+#14053 = CARTESIAN_POINT('',(2.724938966801,-0.84,0.3));+#14054 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14055 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#14056 = PCURVE('',#1511,#14057);+#14057 = DEFINITIONAL_REPRESENTATION('',(#14058),#14062);+#14058 = CIRCLE('',#14059,0.3);+#14059 = AXIS2_PLACEMENT_2D('',#14060,#14061);+#14060 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#14061 = DIRECTION('',(-0.173648177667,0.984807753012));+#14062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14063 = PCURVE('',#14064,#14069);+#14064 = CYLINDRICAL_SURFACE('',#14065,0.3);+#14065 = AXIS2_PLACEMENT_3D('',#14066,#14067,#14068);+#14066 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3));+#14067 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14068 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#14069 = DEFINITIONAL_REPRESENTATION('',(#14070),#14074);+#14070 = LINE('',#14071,#14072);+#14071 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#14072 = VECTOR('',#14073,1.);+#14073 = DIRECTION('',(-1.,-7.951386703659E-17));+#14074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14075 = ORIENTED_EDGE('',*,*,#14076,.T.);+#14076 = EDGE_CURVE('',#14048,#14077,#14079,.T.);+#14077 = VERTEX_POINT('',#14078);+#14078 = CARTESIAN_POINT('',(3.,-0.84,-1.665334536938E-16));+#14079 = SURFACE_CURVE('',#14080,(#14084,#14091),.PCURVE_S1.);+#14080 = LINE('',#14081,#14082);+#14081 = CARTESIAN_POINT('',(2.724938966801,-0.84,-1.665334536938E-16));+#14082 = VECTOR('',#14083,1.);+#14083 = DIRECTION('',(1.,1.110223024625E-16,0.));+#14084 = PCURVE('',#1511,#14085);+#14085 = DEFINITIONAL_REPRESENTATION('',(#14086),#14090);+#14086 = LINE('',#14087,#14088);+#14087 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#14088 = VECTOR('',#14089,1.);+#14089 = DIRECTION('',(0.,-1.));+#14090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14091 = PCURVE('',#14092,#14097);+#14092 = PLANE('',#14093);+#14093 = AXIS2_PLACEMENT_3D('',#14094,#14095,#14096);+#14094 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16));+#14095 = DIRECTION('',(0.,0.,1.));+#14096 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#14097 = DEFINITIONAL_REPRESENTATION('',(#14098),#14102);+#14098 = LINE('',#14099,#14100);+#14099 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#14100 = VECTOR('',#14101,1.);+#14101 = DIRECTION('',(1.,0.));+#14102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14103 = ORIENTED_EDGE('',*,*,#14104,.T.);+#14104 = EDGE_CURVE('',#14077,#14105,#14107,.T.);+#14105 = VERTEX_POINT('',#14106);+#14106 = CARTESIAN_POINT('',(3.,-0.84,0.2));+#14107 = SURFACE_CURVE('',#14108,(#14112,#14119),.PCURVE_S1.);+#14108 = LINE('',#14109,#14110);+#14109 = CARTESIAN_POINT('',(3.,-0.84,-1.665334536938E-16));+#14110 = VECTOR('',#14111,1.);+#14111 = DIRECTION('',(0.,0.,1.));+#14112 = PCURVE('',#1511,#14113);+#14113 = DEFINITIONAL_REPRESENTATION('',(#14114),#14118);+#14114 = LINE('',#14115,#14116);+#14115 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#14116 = VECTOR('',#14117,1.);+#14117 = DIRECTION('',(1.,0.));+#14118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14119 = PCURVE('',#14120,#14125);+#14120 = PLANE('',#14121);+#14121 = AXIS2_PLACEMENT_3D('',#14122,#14123,#14124);+#14122 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16));+#14123 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14124 = DIRECTION('',(0.,0.,1.));+#14125 = DEFINITIONAL_REPRESENTATION('',(#14126),#14130);+#14126 = LINE('',#14127,#14128);+#14127 = CARTESIAN_POINT('',(0.,-0.41));+#14128 = VECTOR('',#14129,1.);+#14129 = DIRECTION('',(1.,0.));+#14130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14131 = ORIENTED_EDGE('',*,*,#14132,.T.);+#14132 = EDGE_CURVE('',#14105,#14133,#14135,.T.);+#14133 = VERTEX_POINT('',#14134);+#14134 = CARTESIAN_POINT('',(2.724938966801,-0.84,0.2));+#14135 = SURFACE_CURVE('',#14136,(#14140,#14147),.PCURVE_S1.);+#14136 = LINE('',#14137,#14138);+#14137 = CARTESIAN_POINT('',(3.,-0.84,0.2));+#14138 = VECTOR('',#14139,1.);+#14139 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14140 = PCURVE('',#1511,#14141);+#14141 = DEFINITIONAL_REPRESENTATION('',(#14142),#14146);+#14142 = LINE('',#14143,#14144);+#14143 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#14144 = VECTOR('',#14145,1.);+#14145 = DIRECTION('',(0.,1.));+#14146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14147 = PCURVE('',#14148,#14153);+#14148 = PLANE('',#14149);+#14149 = AXIS2_PLACEMENT_3D('',#14150,#14151,#14152);+#14150 = CARTESIAN_POINT('',(3.,-0.43,0.2));+#14151 = DIRECTION('',(0.,0.,-1.));+#14152 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#14153 = DEFINITIONAL_REPRESENTATION('',(#14154),#14158);+#14154 = LINE('',#14155,#14156);+#14155 = CARTESIAN_POINT('',(4.551914400962E-17,-0.41));+#14156 = VECTOR('',#14157,1.);+#14157 = DIRECTION('',(1.,0.));+#14158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14159 = ORIENTED_EDGE('',*,*,#14160,.T.);+#14160 = EDGE_CURVE('',#14133,#14161,#14163,.T.);+#14161 = VERTEX_POINT('',#14162);+#14162 = CARTESIAN_POINT('',(2.6264581915,-0.84,0.282635182233));+#14163 = SURFACE_CURVE('',#14164,(#14169,#14180),.PCURVE_S1.);+#14164 = CIRCLE('',#14165,0.1);+#14165 = AXIS2_PLACEMENT_3D('',#14166,#14167,#14168);+#14166 = CARTESIAN_POINT('',(2.724938966801,-0.84,0.3));+#14167 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14168 = DIRECTION('',(0.,0.,-1.));+#14169 = PCURVE('',#1511,#14170);+#14170 = DEFINITIONAL_REPRESENTATION('',(#14171),#14179);+#14171 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14172,#14173,#14174,#14175+ ,#14176,#14177,#14178),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14172 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14173 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#14174 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#14175 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#14176 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#14177 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#14178 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14180 = PCURVE('',#14181,#14186);+#14181 = CYLINDRICAL_SURFACE('',#14182,0.1);+#14182 = AXIS2_PLACEMENT_3D('',#14183,#14184,#14185);+#14183 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3));+#14184 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14185 = DIRECTION('',(0.,0.,-1.));+#14186 = DEFINITIONAL_REPRESENTATION('',(#14187),#14191);+#14187 = LINE('',#14188,#14189);+#14188 = CARTESIAN_POINT('',(0.,-0.41));+#14189 = VECTOR('',#14190,1.);+#14190 = DIRECTION('',(1.,0.));+#14191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14192 = ORIENTED_EDGE('',*,*,#14193,.T.);+#14193 = EDGE_CURVE('',#14161,#14194,#14196,.T.);+#14194 = VERTEX_POINT('',#14195);+#14195 = CARTESIAN_POINT('',(2.545442325904,-0.84,0.7770944533));+#14196 = SURFACE_CURVE('',#14197,(#14201,#14208),.PCURVE_S1.);+#14197 = LINE('',#14198,#14199);+#14198 = CARTESIAN_POINT('',(2.6264581915,-0.84,0.282635182233));+#14199 = VECTOR('',#14200,1.);+#14200 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#14201 = PCURVE('',#1511,#14202);+#14202 = DEFINITIONAL_REPRESENTATION('',(#14203),#14207);+#14203 = LINE('',#14204,#14205);+#14204 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#14205 = VECTOR('',#14206,1.);+#14206 = DIRECTION('',(0.986841372087,0.161691392282));+#14207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14208 = PCURVE('',#14209,#14214);+#14209 = PLANE('',#14210);+#14210 = AXIS2_PLACEMENT_3D('',#14211,#14212,#14213);+#14211 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233));+#14212 = DIRECTION('',(-0.986841372087,-1.095614012943E-16,+ -0.161691392282));+#14213 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#14214 = DEFINITIONAL_REPRESENTATION('',(#14215),#14219);+#14215 = LINE('',#14216,#14217);+#14216 = CARTESIAN_POINT('',(7.360053770421E-18,-0.41));+#14217 = VECTOR('',#14218,1.);+#14218 = DIRECTION('',(1.,1.454264753163E-33));+#14219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14220 = ORIENTED_EDGE('',*,*,#14221,.T.);+#14221 = EDGE_CURVE('',#14194,#1468,#14222,.T.);+#14222 = SURFACE_CURVE('',#14223,(#14228,#14235),.PCURVE_S1.);+#14223 = CIRCLE('',#14224,0.3);+#14224 = AXIS2_PLACEMENT_3D('',#14225,#14226,#14227);+#14225 = CARTESIAN_POINT('',(2.25,-0.84,0.725));+#14226 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14227 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#14228 = PCURVE('',#1511,#14229);+#14229 = DEFINITIONAL_REPRESENTATION('',(#14230),#14234);+#14230 = CIRCLE('',#14231,0.3);+#14231 = AXIS2_PLACEMENT_2D('',#14232,#14233);+#14232 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#14233 = DIRECTION('',(0.173648177667,-0.984807753012));+#14234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14235 = PCURVE('',#1483,#14236);+#14236 = DEFINITIONAL_REPRESENTATION('',(#14237),#14241);+#14237 = LINE('',#14238,#14239);+#14238 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#14239 = VECTOR('',#14240,1.);+#14240 = DIRECTION('',(-1.,7.951386703659E-17));+#14241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14242 = ORIENTED_EDGE('',*,*,#1495,.T.);+#14243 = ADVANCED_FACE('',(#14244),#14209,.F.);+#14244 = FACE_BOUND('',#14245,.F.);+#14245 = EDGE_LOOP('',(#14246,#14269,#14270,#14293));+#14246 = ORIENTED_EDGE('',*,*,#14247,.T.);+#14247 = EDGE_CURVE('',#14248,#14161,#14250,.T.);+#14248 = VERTEX_POINT('',#14249);+#14249 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233));+#14250 = SURFACE_CURVE('',#14251,(#14255,#14262),.PCURVE_S1.);+#14251 = LINE('',#14252,#14253);+#14252 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233));+#14253 = VECTOR('',#14254,1.);+#14254 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14255 = PCURVE('',#14209,#14256);+#14256 = DEFINITIONAL_REPRESENTATION('',(#14257),#14261);+#14257 = LINE('',#14258,#14259);+#14258 = CARTESIAN_POINT('',(0.,0.));+#14259 = VECTOR('',#14260,1.);+#14260 = DIRECTION('',(5.505756095676E-29,-1.));+#14261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14262 = PCURVE('',#14181,#14263);+#14263 = DEFINITIONAL_REPRESENTATION('',(#14264),#14268);+#14264 = LINE('',#14265,#14266);+#14265 = CARTESIAN_POINT('',(1.396263401592,0.));+#14266 = VECTOR('',#14267,1.);+#14267 = DIRECTION('',(0.,-1.));+#14268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14269 = ORIENTED_EDGE('',*,*,#14193,.T.);+#14270 = ORIENTED_EDGE('',*,*,#14271,.F.);+#14271 = EDGE_CURVE('',#14272,#14194,#14274,.T.);+#14272 = VERTEX_POINT('',#14273);+#14273 = CARTESIAN_POINT('',(2.545442325904,-0.43,0.7770944533));+#14274 = SURFACE_CURVE('',#14275,(#14279,#14286),.PCURVE_S1.);+#14275 = LINE('',#14276,#14277);+#14276 = CARTESIAN_POINT('',(2.545442325904,-0.43,0.7770944533));+#14277 = VECTOR('',#14278,1.);+#14278 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14279 = PCURVE('',#14209,#14280);+#14280 = DEFINITIONAL_REPRESENTATION('',(#14281),#14285);+#14281 = LINE('',#14282,#14283);+#14282 = CARTESIAN_POINT('',(0.501052433606,8.994567934487E-18));+#14283 = VECTOR('',#14284,1.);+#14284 = DIRECTION('',(5.505756095676E-29,-1.));+#14285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14286 = PCURVE('',#1483,#14287);+#14287 = DEFINITIONAL_REPRESENTATION('',(#14288),#14292);+#14288 = LINE('',#14289,#14290);+#14289 = CARTESIAN_POINT('',(6.28318530718,-5.551115123126E-17));+#14290 = VECTOR('',#14291,1.);+#14291 = DIRECTION('',(0.,-1.));+#14292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14293 = ORIENTED_EDGE('',*,*,#14294,.F.);+#14294 = EDGE_CURVE('',#14248,#14272,#14295,.T.);+#14295 = SURFACE_CURVE('',#14296,(#14300,#14307),.PCURVE_S1.);+#14296 = LINE('',#14297,#14298);+#14297 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233));+#14298 = VECTOR('',#14299,1.);+#14299 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#14300 = PCURVE('',#14209,#14301);+#14301 = DEFINITIONAL_REPRESENTATION('',(#14302),#14306);+#14302 = LINE('',#14303,#14304);+#14303 = CARTESIAN_POINT('',(0.,0.));+#14304 = VECTOR('',#14305,1.);+#14305 = DIRECTION('',(1.,1.454264753163E-33));+#14306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14307 = PCURVE('',#1455,#14308);+#14308 = DEFINITIONAL_REPRESENTATION('',(#14309),#14313);+#14309 = LINE('',#14310,#14311);+#14310 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#14311 = VECTOR('',#14312,1.);+#14312 = DIRECTION('',(0.986841372087,0.161691392282));+#14313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14314 = ADVANCED_FACE('',(#14315),#14181,.F.);+#14315 = FACE_BOUND('',#14316,.F.);+#14316 = EDGE_LOOP('',(#14317,#14340,#14341,#14342));+#14317 = ORIENTED_EDGE('',*,*,#14318,.T.);+#14318 = EDGE_CURVE('',#14319,#14133,#14321,.T.);+#14319 = VERTEX_POINT('',#14320);+#14320 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.2));+#14321 = SURFACE_CURVE('',#14322,(#14326,#14333),.PCURVE_S1.);+#14322 = LINE('',#14323,#14324);+#14323 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.2));+#14324 = VECTOR('',#14325,1.);+#14325 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14326 = PCURVE('',#14181,#14327);+#14327 = DEFINITIONAL_REPRESENTATION('',(#14328),#14332);+#14328 = LINE('',#14329,#14330);+#14329 = CARTESIAN_POINT('',(0.,0.));+#14330 = VECTOR('',#14331,1.);+#14331 = DIRECTION('',(0.,-1.));+#14332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14333 = PCURVE('',#14148,#14334);+#14334 = DEFINITIONAL_REPRESENTATION('',(#14335),#14339);+#14335 = LINE('',#14336,#14337);+#14336 = CARTESIAN_POINT('',(0.275061033199,3.053790922347E-17));+#14337 = VECTOR('',#14338,1.);+#14338 = DIRECTION('',(0.,-1.));+#14339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14340 = ORIENTED_EDGE('',*,*,#14160,.T.);+#14341 = ORIENTED_EDGE('',*,*,#14247,.F.);+#14342 = ORIENTED_EDGE('',*,*,#14343,.F.);+#14343 = EDGE_CURVE('',#14319,#14248,#14344,.T.);+#14344 = SURFACE_CURVE('',#14345,(#14350,#14357),.PCURVE_S1.);+#14345 = CIRCLE('',#14346,0.1);+#14346 = AXIS2_PLACEMENT_3D('',#14347,#14348,#14349);+#14347 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3));+#14348 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14349 = DIRECTION('',(0.,0.,-1.));+#14350 = PCURVE('',#14181,#14351);+#14351 = DEFINITIONAL_REPRESENTATION('',(#14352),#14356);+#14352 = LINE('',#14353,#14354);+#14353 = CARTESIAN_POINT('',(0.,0.));+#14354 = VECTOR('',#14355,1.);+#14355 = DIRECTION('',(1.,0.));+#14356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14357 = PCURVE('',#1455,#14358);+#14358 = DEFINITIONAL_REPRESENTATION('',(#14359),#14367);+#14359 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14360,#14361,#14362,#14363+ ,#14364,#14365,#14366),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14360 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14361 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#14362 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#14363 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#14364 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#14365 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#14366 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14368 = ADVANCED_FACE('',(#14369),#14148,.F.);+#14369 = FACE_BOUND('',#14370,.F.);+#14370 = EDGE_LOOP('',(#14371,#14394,#14395,#14396));+#14371 = ORIENTED_EDGE('',*,*,#14372,.T.);+#14372 = EDGE_CURVE('',#14373,#14105,#14375,.T.);+#14373 = VERTEX_POINT('',#14374);+#14374 = CARTESIAN_POINT('',(3.,-0.43,0.2));+#14375 = SURFACE_CURVE('',#14376,(#14380,#14387),.PCURVE_S1.);+#14376 = LINE('',#14377,#14378);+#14377 = CARTESIAN_POINT('',(3.,-0.43,0.2));+#14378 = VECTOR('',#14379,1.);+#14379 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14380 = PCURVE('',#14148,#14381);+#14381 = DEFINITIONAL_REPRESENTATION('',(#14382),#14386);+#14382 = LINE('',#14383,#14384);+#14383 = CARTESIAN_POINT('',(-0.,0.));+#14384 = VECTOR('',#14385,1.);+#14385 = DIRECTION('',(0.,-1.));+#14386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14387 = PCURVE('',#14120,#14388);+#14388 = DEFINITIONAL_REPRESENTATION('',(#14389),#14393);+#14389 = LINE('',#14390,#14391);+#14390 = CARTESIAN_POINT('',(0.2,0.));+#14391 = VECTOR('',#14392,1.);+#14392 = DIRECTION('',(0.,-1.));+#14393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14394 = ORIENTED_EDGE('',*,*,#14132,.T.);+#14395 = ORIENTED_EDGE('',*,*,#14318,.F.);+#14396 = ORIENTED_EDGE('',*,*,#14397,.F.);+#14397 = EDGE_CURVE('',#14373,#14319,#14398,.T.);+#14398 = SURFACE_CURVE('',#14399,(#14403,#14410),.PCURVE_S1.);+#14399 = LINE('',#14400,#14401);+#14400 = CARTESIAN_POINT('',(3.,-0.43,0.2));+#14401 = VECTOR('',#14402,1.);+#14402 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14403 = PCURVE('',#14148,#14404);+#14404 = DEFINITIONAL_REPRESENTATION('',(#14405),#14409);+#14405 = LINE('',#14406,#14407);+#14406 = CARTESIAN_POINT('',(-0.,0.));+#14407 = VECTOR('',#14408,1.);+#14408 = DIRECTION('',(1.,0.));+#14409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14410 = PCURVE('',#1455,#14411);+#14411 = DEFINITIONAL_REPRESENTATION('',(#14412),#14416);+#14412 = LINE('',#14413,#14414);+#14413 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#14414 = VECTOR('',#14415,1.);+#14415 = DIRECTION('',(0.,1.));+#14416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14417 = ADVANCED_FACE('',(#14418),#14120,.F.);+#14418 = FACE_BOUND('',#14419,.F.);+#14419 = EDGE_LOOP('',(#14420,#14443,#14444,#14445));+#14420 = ORIENTED_EDGE('',*,*,#14421,.T.);+#14421 = EDGE_CURVE('',#14422,#14077,#14424,.T.);+#14422 = VERTEX_POINT('',#14423);+#14423 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16));+#14424 = SURFACE_CURVE('',#14425,(#14429,#14436),.PCURVE_S1.);+#14425 = LINE('',#14426,#14427);+#14426 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16));+#14427 = VECTOR('',#14428,1.);+#14428 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14429 = PCURVE('',#14120,#14430);+#14430 = DEFINITIONAL_REPRESENTATION('',(#14431),#14435);+#14431 = LINE('',#14432,#14433);+#14432 = CARTESIAN_POINT('',(0.,0.));+#14433 = VECTOR('',#14434,1.);+#14434 = DIRECTION('',(0.,-1.));+#14435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14436 = PCURVE('',#14092,#14437);+#14437 = DEFINITIONAL_REPRESENTATION('',(#14438),#14442);+#14438 = LINE('',#14439,#14440);+#14439 = CARTESIAN_POINT('',(0.275061033199,-3.053790922347E-17));+#14440 = VECTOR('',#14441,1.);+#14441 = DIRECTION('',(0.,-1.));+#14442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14443 = ORIENTED_EDGE('',*,*,#14104,.T.);+#14444 = ORIENTED_EDGE('',*,*,#14372,.F.);+#14445 = ORIENTED_EDGE('',*,*,#14446,.F.);+#14446 = EDGE_CURVE('',#14422,#14373,#14447,.T.);+#14447 = SURFACE_CURVE('',#14448,(#14452,#14459),.PCURVE_S1.);+#14448 = LINE('',#14449,#14450);+#14449 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16));+#14450 = VECTOR('',#14451,1.);+#14451 = DIRECTION('',(0.,0.,1.));+#14452 = PCURVE('',#14120,#14453);+#14453 = DEFINITIONAL_REPRESENTATION('',(#14454),#14458);+#14454 = LINE('',#14455,#14456);+#14455 = CARTESIAN_POINT('',(0.,0.));+#14456 = VECTOR('',#14457,1.);+#14457 = DIRECTION('',(1.,0.));+#14458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14459 = PCURVE('',#1455,#14460);+#14460 = DEFINITIONAL_REPRESENTATION('',(#14461),#14465);+#14461 = LINE('',#14462,#14463);+#14462 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#14463 = VECTOR('',#14464,1.);+#14464 = DIRECTION('',(1.,0.));+#14465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14466 = ADVANCED_FACE('',(#14467),#14092,.F.);+#14467 = FACE_BOUND('',#14468,.F.);+#14468 = EDGE_LOOP('',(#14469,#14492,#14493,#14494));+#14469 = ORIENTED_EDGE('',*,*,#14470,.T.);+#14470 = EDGE_CURVE('',#14471,#14048,#14473,.T.);+#14471 = VERTEX_POINT('',#14472);+#14472 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16));+#14473 = SURFACE_CURVE('',#14474,(#14478,#14485),.PCURVE_S1.);+#14474 = LINE('',#14475,#14476);+#14475 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16));+#14476 = VECTOR('',#14477,1.);+#14477 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14478 = PCURVE('',#14092,#14479);+#14479 = DEFINITIONAL_REPRESENTATION('',(#14480),#14484);+#14480 = LINE('',#14481,#14482);+#14481 = CARTESIAN_POINT('',(0.,0.));+#14482 = VECTOR('',#14483,1.);+#14483 = DIRECTION('',(0.,-1.));+#14484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14485 = PCURVE('',#14064,#14486);+#14486 = DEFINITIONAL_REPRESENTATION('',(#14487),#14491);+#14487 = LINE('',#14488,#14489);+#14488 = CARTESIAN_POINT('',(4.886921905584,0.));+#14489 = VECTOR('',#14490,1.);+#14490 = DIRECTION('',(0.,-1.));+#14491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14492 = ORIENTED_EDGE('',*,*,#14076,.T.);+#14493 = ORIENTED_EDGE('',*,*,#14421,.F.);+#14494 = ORIENTED_EDGE('',*,*,#14495,.F.);+#14495 = EDGE_CURVE('',#14471,#14422,#14496,.T.);+#14496 = SURFACE_CURVE('',#14497,(#14501,#14508),.PCURVE_S1.);+#14497 = LINE('',#14498,#14499);+#14498 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16));+#14499 = VECTOR('',#14500,1.);+#14500 = DIRECTION('',(1.,1.110223024625E-16,0.));+#14501 = PCURVE('',#14092,#14502);+#14502 = DEFINITIONAL_REPRESENTATION('',(#14503),#14507);+#14503 = LINE('',#14504,#14505);+#14504 = CARTESIAN_POINT('',(0.,0.));+#14505 = VECTOR('',#14506,1.);+#14506 = DIRECTION('',(1.,0.));+#14507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14508 = PCURVE('',#1455,#14509);+#14509 = DEFINITIONAL_REPRESENTATION('',(#14510),#14514);+#14510 = LINE('',#14511,#14512);+#14511 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#14512 = VECTOR('',#14513,1.);+#14513 = DIRECTION('',(0.,-1.));+#14514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14515 = ADVANCED_FACE('',(#14516),#14064,.T.);+#14516 = FACE_BOUND('',#14517,.T.);+#14517 = EDGE_LOOP('',(#14518,#14542,#14543,#14544));+#14518 = ORIENTED_EDGE('',*,*,#14519,.T.);+#14519 = EDGE_CURVE('',#14520,#14471,#14522,.T.);+#14520 = VERTEX_POINT('',#14521);+#14521 = CARTESIAN_POINT('',(2.429496640897,-0.43,0.2479055467));+#14522 = SURFACE_CURVE('',#14523,(#14528,#14535),.PCURVE_S1.);+#14523 = CIRCLE('',#14524,0.3);+#14524 = AXIS2_PLACEMENT_3D('',#14525,#14526,#14527);+#14525 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3));+#14526 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14527 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#14528 = PCURVE('',#14064,#14529);+#14529 = DEFINITIONAL_REPRESENTATION('',(#14530),#14534);+#14530 = LINE('',#14531,#14532);+#14531 = CARTESIAN_POINT('',(6.28318530718,-5.551115123126E-17));+#14532 = VECTOR('',#14533,1.);+#14533 = DIRECTION('',(-1.,3.97569335183E-17));+#14534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14535 = PCURVE('',#1455,#14536);+#14536 = DEFINITIONAL_REPRESENTATION('',(#14537),#14541);+#14537 = CIRCLE('',#14538,0.3);+#14538 = AXIS2_PLACEMENT_2D('',#14539,#14540);+#14539 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#14540 = DIRECTION('',(-0.173648177667,0.984807753012));+#14541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14542 = ORIENTED_EDGE('',*,*,#14470,.T.);+#14543 = ORIENTED_EDGE('',*,*,#14047,.F.);+#14544 = ORIENTED_EDGE('',*,*,#14545,.F.);+#14545 = EDGE_CURVE('',#14520,#14020,#14546,.T.);+#14546 = SURFACE_CURVE('',#14547,(#14551,#14558),.PCURVE_S1.);+#14547 = LINE('',#14548,#14549);+#14548 = CARTESIAN_POINT('',(2.429496640897,-0.43,0.2479055467));+#14549 = VECTOR('',#14550,1.);+#14550 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14551 = PCURVE('',#14064,#14552);+#14552 = DEFINITIONAL_REPRESENTATION('',(#14553),#14557);+#14553 = LINE('',#14554,#14555);+#14554 = CARTESIAN_POINT('',(6.28318530718,0.));+#14555 = VECTOR('',#14556,1.);+#14556 = DIRECTION('',(0.,-1.));+#14557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14558 = PCURVE('',#14035,#14559);+#14559 = DEFINITIONAL_REPRESENTATION('',(#14560),#14564);+#14560 = LINE('',#14561,#14562);+#14561 = CARTESIAN_POINT('',(0.501052433606,-8.994567934487E-18));+#14562 = VECTOR('',#14563,1.);+#14563 = DIRECTION('',(-5.505756095676E-29,-1.));+#14564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14565 = ADVANCED_FACE('',(#14566),#14035,.F.);+#14566 = FACE_BOUND('',#14567,.F.);+#14567 = EDGE_LOOP('',(#14568,#14591,#14592,#14593));+#14568 = ORIENTED_EDGE('',*,*,#14569,.T.);+#14569 = EDGE_CURVE('',#14570,#13987,#14572,.T.);+#14570 = VERTEX_POINT('',#14571);+#14571 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767));+#14572 = SURFACE_CURVE('',#14573,(#14577,#14584),.PCURVE_S1.);+#14573 = LINE('',#14574,#14575);+#14574 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767));+#14575 = VECTOR('',#14576,1.);+#14576 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14577 = PCURVE('',#14035,#14578);+#14578 = DEFINITIONAL_REPRESENTATION('',(#14579),#14583);+#14579 = LINE('',#14580,#14581);+#14580 = CARTESIAN_POINT('',(0.,0.));+#14581 = VECTOR('',#14582,1.);+#14582 = DIRECTION('',(-5.505756095676E-29,-1.));+#14583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14584 = PCURVE('',#14007,#14585);+#14585 = DEFINITIONAL_REPRESENTATION('',(#14586),#14590);+#14586 = LINE('',#14587,#14588);+#14587 = CARTESIAN_POINT('',(1.396263401592,-5.551115123126E-17));+#14588 = VECTOR('',#14589,1.);+#14589 = DIRECTION('',(0.,-1.));+#14590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14591 = ORIENTED_EDGE('',*,*,#14019,.T.);+#14592 = ORIENTED_EDGE('',*,*,#14545,.F.);+#14593 = ORIENTED_EDGE('',*,*,#14594,.F.);+#14594 = EDGE_CURVE('',#14570,#14520,#14595,.T.);+#14595 = SURFACE_CURVE('',#14596,(#14600,#14607),.PCURVE_S1.);+#14596 = LINE('',#14597,#14598);+#14597 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767));+#14598 = VECTOR('',#14599,1.);+#14599 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#14600 = PCURVE('',#14035,#14601);+#14601 = DEFINITIONAL_REPRESENTATION('',(#14602),#14606);+#14602 = LINE('',#14603,#14604);+#14603 = CARTESIAN_POINT('',(0.,0.));+#14604 = VECTOR('',#14605,1.);+#14605 = DIRECTION('',(1.,-1.454264753163E-33));+#14606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14607 = PCURVE('',#1455,#14608);+#14608 = DEFINITIONAL_REPRESENTATION('',(#14609),#14613);+#14609 = LINE('',#14610,#14611);+#14610 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#14611 = VECTOR('',#14612,1.);+#14612 = DIRECTION('',(-0.986841372087,-0.161691392282));+#14613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14614 = ADVANCED_FACE('',(#14615),#14007,.F.);+#14615 = FACE_BOUND('',#14616,.F.);+#14616 = EDGE_LOOP('',(#14617,#14640,#14641,#14642));+#14617 = ORIENTED_EDGE('',*,*,#14618,.T.);+#14618 = EDGE_CURVE('',#14619,#13964,#14621,.T.);+#14619 = VERTEX_POINT('',#14620);+#14620 = CARTESIAN_POINT('',(2.25,-0.43,0.825));+#14621 = SURFACE_CURVE('',#14622,(#14626,#14633),.PCURVE_S1.);+#14622 = LINE('',#14623,#14624);+#14623 = CARTESIAN_POINT('',(2.25,-0.43,0.825));+#14624 = VECTOR('',#14625,1.);+#14625 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14626 = PCURVE('',#14007,#14627);+#14627 = DEFINITIONAL_REPRESENTATION('',(#14628),#14632);+#14628 = LINE('',#14629,#14630);+#14629 = CARTESIAN_POINT('',(0.,0.));+#14630 = VECTOR('',#14631,1.);+#14631 = DIRECTION('',(0.,-1.));+#14632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14633 = PCURVE('',#902,#14634);+#14634 = DEFINITIONAL_REPRESENTATION('',(#14635),#14639);+#14635 = LINE('',#14636,#14637);+#14636 = CARTESIAN_POINT('',(0.45,-4.996003610812E-17));+#14637 = VECTOR('',#14638,1.);+#14638 = DIRECTION('',(0.,-1.));+#14639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14640 = ORIENTED_EDGE('',*,*,#13986,.T.);+#14641 = ORIENTED_EDGE('',*,*,#14569,.F.);+#14642 = ORIENTED_EDGE('',*,*,#14643,.F.);+#14643 = EDGE_CURVE('',#14619,#14570,#14644,.T.);+#14644 = SURFACE_CURVE('',#14645,(#14650,#14657),.PCURVE_S1.);+#14645 = CIRCLE('',#14646,0.1);+#14646 = AXIS2_PLACEMENT_3D('',#14647,#14648,#14649);+#14647 = CARTESIAN_POINT('',(2.25,-0.43,0.725));+#14648 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14649 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#14650 = PCURVE('',#14007,#14651);+#14651 = DEFINITIONAL_REPRESENTATION('',(#14652),#14656);+#14652 = LINE('',#14653,#14654);+#14653 = CARTESIAN_POINT('',(0.,0.));+#14654 = VECTOR('',#14655,1.);+#14655 = DIRECTION('',(1.,-3.975693351839E-17));+#14656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14657 = PCURVE('',#1455,#14658);+#14658 = DEFINITIONAL_REPRESENTATION('',(#14659),#14667);+#14659 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14660,#14661,#14662,#14663+ ,#14664,#14665,#14666),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14660 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#14661 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#14662 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#14663 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#14664 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#14665 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#14666 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#14667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14668 = ADVANCED_FACE('',(#14669),#1483,.T.);+#14669 = FACE_BOUND('',#14670,.T.);+#14670 = EDGE_LOOP('',(#14671,#14693,#14694,#14695));+#14671 = ORIENTED_EDGE('',*,*,#14672,.T.);+#14672 = EDGE_CURVE('',#14272,#1440,#14673,.T.);+#14673 = SURFACE_CURVE('',#14674,(#14679,#14686),.PCURVE_S1.);+#14674 = CIRCLE('',#14675,0.3);+#14675 = AXIS2_PLACEMENT_3D('',#14676,#14677,#14678);+#14676 = CARTESIAN_POINT('',(2.25,-0.43,0.725));+#14677 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14678 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#14679 = PCURVE('',#1483,#14680);+#14680 = DEFINITIONAL_REPRESENTATION('',(#14681),#14685);+#14681 = LINE('',#14682,#14683);+#14682 = CARTESIAN_POINT('',(6.28318530718,0.));+#14683 = VECTOR('',#14684,1.);+#14684 = DIRECTION('',(-1.,0.));+#14685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14686 = PCURVE('',#1455,#14687);+#14687 = DEFINITIONAL_REPRESENTATION('',(#14688),#14692);+#14688 = CIRCLE('',#14689,0.3);+#14689 = AXIS2_PLACEMENT_2D('',#14690,#14691);+#14690 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#14691 = DIRECTION('',(0.173648177667,-0.984807753012));+#14692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14693 = ORIENTED_EDGE('',*,*,#1467,.T.);+#14694 = ORIENTED_EDGE('',*,*,#14221,.F.);+#14695 = ORIENTED_EDGE('',*,*,#14271,.F.);+#14696 = ADVANCED_FACE('',(#14697),#1455,.F.);+#14697 = FACE_BOUND('',#14698,.F.);+#14698 = EDGE_LOOP('',(#14699,#14720,#14741,#14742,#14743,#14744,#14745,+ #14746,#14747,#14748,#14749,#14750));+#14699 = ORIENTED_EDGE('',*,*,#14700,.F.);+#14700 = EDGE_CURVE('',#887,#1417,#14701,.T.);+#14701 = SURFACE_CURVE('',#14702,(#14706,#14713),.PCURVE_S1.);+#14702 = LINE('',#14703,#14704);+#14703 = CARTESIAN_POINT('',(1.95,-0.43,0.786976568901));+#14704 = VECTOR('',#14705,1.);+#14705 = DIRECTION('',(0.,0.,1.));+#14706 = PCURVE('',#1455,#14707);+#14707 = DEFINITIONAL_REPRESENTATION('',(#14708),#14712);+#14708 = LINE('',#14709,#14710);+#14709 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#14710 = VECTOR('',#14711,1.);+#14711 = DIRECTION('',(1.,0.));+#14712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14713 = PCURVE('',#930,#14714);+#14714 = DEFINITIONAL_REPRESENTATION('',(#14715),#14719);+#14715 = LINE('',#14716,#14717);+#14716 = CARTESIAN_POINT('',(2.705,-0.238023431099));+#14717 = VECTOR('',#14718,1.);+#14718 = DIRECTION('',(0.,1.));+#14719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14720 = ORIENTED_EDGE('',*,*,#14721,.T.);+#14721 = EDGE_CURVE('',#887,#14619,#14722,.T.);+#14722 = SURFACE_CURVE('',#14723,(#14727,#14734),.PCURVE_S1.);+#14723 = LINE('',#14724,#14725);+#14724 = CARTESIAN_POINT('',(1.8,-0.43,0.825));+#14725 = VECTOR('',#14726,1.);+#14726 = DIRECTION('',(1.,1.110223024625E-16,0.));+#14727 = PCURVE('',#1455,#14728);+#14728 = DEFINITIONAL_REPRESENTATION('',(#14729),#14733);+#14729 = LINE('',#14730,#14731);+#14730 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#14731 = VECTOR('',#14732,1.);+#14732 = DIRECTION('',(0.,-1.));+#14733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14734 = PCURVE('',#902,#14735);+#14735 = DEFINITIONAL_REPRESENTATION('',(#14736),#14740);+#14736 = LINE('',#14737,#14738);+#14737 = CARTESIAN_POINT('',(0.,0.));+#14738 = VECTOR('',#14739,1.);+#14739 = DIRECTION('',(1.,0.));+#14740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14741 = ORIENTED_EDGE('',*,*,#14643,.T.);+#14742 = ORIENTED_EDGE('',*,*,#14594,.T.);+#14743 = ORIENTED_EDGE('',*,*,#14519,.T.);+#14744 = ORIENTED_EDGE('',*,*,#14495,.T.);+#14745 = ORIENTED_EDGE('',*,*,#14446,.T.);+#14746 = ORIENTED_EDGE('',*,*,#14397,.T.);+#14747 = ORIENTED_EDGE('',*,*,#14343,.T.);+#14748 = ORIENTED_EDGE('',*,*,#14294,.T.);+#14749 = ORIENTED_EDGE('',*,*,#14672,.T.);+#14750 = ORIENTED_EDGE('',*,*,#1439,.T.);+#14751 = ADVANCED_FACE('',(#14752),#1404,.T.);+#14752 = FACE_BOUND('',#14753,.T.);+#14753 = EDGE_LOOP('',(#14754,#14775,#14798,#14831,#14859,#14888,#14916,+ #14944,#14972,#15005,#15033,#15055));+#14754 = ORIENTED_EDGE('',*,*,#14755,.F.);+#14755 = EDGE_CURVE('',#915,#1389,#14756,.T.);+#14756 = SURFACE_CURVE('',#14757,(#14761,#14768),.PCURVE_S1.);+#14757 = LINE('',#14758,#14759);+#14758 = CARTESIAN_POINT('',(1.95,0.43,0.786976568901));+#14759 = VECTOR('',#14760,1.);+#14760 = DIRECTION('',(0.,0.,1.));+#14761 = PCURVE('',#1404,#14762);+#14762 = DEFINITIONAL_REPRESENTATION('',(#14763),#14767);+#14763 = LINE('',#14764,#14765);+#14764 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#14765 = VECTOR('',#14766,1.);+#14766 = DIRECTION('',(1.,0.));+#14767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14768 = PCURVE('',#930,#14769);+#14769 = DEFINITIONAL_REPRESENTATION('',(#14770),#14774);+#14770 = LINE('',#14771,#14772);+#14771 = CARTESIAN_POINT('',(1.845,-0.238023431099));+#14772 = VECTOR('',#14773,1.);+#14773 = DIRECTION('',(0.,1.));+#14774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14775 = ORIENTED_EDGE('',*,*,#14776,.T.);+#14776 = EDGE_CURVE('',#915,#14777,#14779,.T.);+#14777 = VERTEX_POINT('',#14778);+#14778 = CARTESIAN_POINT('',(2.25,0.43,0.825));+#14779 = SURFACE_CURVE('',#14780,(#14784,#14791),.PCURVE_S1.);+#14780 = LINE('',#14781,#14782);+#14781 = CARTESIAN_POINT('',(1.8,0.43,0.825));+#14782 = VECTOR('',#14783,1.);+#14783 = DIRECTION('',(1.,1.110223024625E-16,0.));+#14784 = PCURVE('',#1404,#14785);+#14785 = DEFINITIONAL_REPRESENTATION('',(#14786),#14790);+#14786 = LINE('',#14787,#14788);+#14787 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#14788 = VECTOR('',#14789,1.);+#14789 = DIRECTION('',(0.,-1.));+#14790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14791 = PCURVE('',#958,#14792);+#14792 = DEFINITIONAL_REPRESENTATION('',(#14793),#14797);+#14793 = LINE('',#14794,#14795);+#14794 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#14795 = VECTOR('',#14796,1.);+#14796 = DIRECTION('',(1.,0.));+#14797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14798 = ORIENTED_EDGE('',*,*,#14799,.T.);+#14799 = EDGE_CURVE('',#14777,#14800,#14802,.T.);+#14800 = VERTEX_POINT('',#14801);+#14801 = CARTESIAN_POINT('',(2.348480775301,0.43,0.742364817767));+#14802 = SURFACE_CURVE('',#14803,(#14808,#14819),.PCURVE_S1.);+#14803 = CIRCLE('',#14804,0.1);+#14804 = AXIS2_PLACEMENT_3D('',#14805,#14806,#14807);+#14805 = CARTESIAN_POINT('',(2.25,0.43,0.725));+#14806 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14807 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#14808 = PCURVE('',#1404,#14809);+#14809 = DEFINITIONAL_REPRESENTATION('',(#14810),#14818);+#14810 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14811,#14812,#14813,#14814+ ,#14815,#14816,#14817),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14811 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#14812 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#14813 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#14814 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#14815 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#14816 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#14817 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#14818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14819 = PCURVE('',#14820,#14825);+#14820 = CYLINDRICAL_SURFACE('',#14821,0.1);+#14821 = AXIS2_PLACEMENT_3D('',#14822,#14823,#14824);+#14822 = CARTESIAN_POINT('',(2.25,0.84,0.725));+#14823 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14824 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#14825 = DEFINITIONAL_REPRESENTATION('',(#14826),#14830);+#14826 = LINE('',#14827,#14828);+#14827 = CARTESIAN_POINT('',(0.,-0.41));+#14828 = VECTOR('',#14829,1.);+#14829 = DIRECTION('',(1.,-3.975693351839E-17));+#14830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14831 = ORIENTED_EDGE('',*,*,#14832,.T.);+#14832 = EDGE_CURVE('',#14800,#14833,#14835,.T.);+#14833 = VERTEX_POINT('',#14834);+#14834 = CARTESIAN_POINT('',(2.429496640897,0.43,0.2479055467));+#14835 = SURFACE_CURVE('',#14836,(#14840,#14847),.PCURVE_S1.);+#14836 = LINE('',#14837,#14838);+#14837 = CARTESIAN_POINT('',(2.348480775301,0.43,0.742364817767));+#14838 = VECTOR('',#14839,1.);+#14839 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#14840 = PCURVE('',#1404,#14841);+#14841 = DEFINITIONAL_REPRESENTATION('',(#14842),#14846);+#14842 = LINE('',#14843,#14844);+#14843 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#14844 = VECTOR('',#14845,1.);+#14845 = DIRECTION('',(-0.986841372087,-0.161691392282));+#14846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14847 = PCURVE('',#14848,#14853);+#14848 = PLANE('',#14849);+#14849 = AXIS2_PLACEMENT_3D('',#14850,#14851,#14852);+#14850 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767));+#14851 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282)+ );+#14852 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#14853 = DEFINITIONAL_REPRESENTATION('',(#14854),#14858);+#14854 = LINE('',#14855,#14856);+#14855 = CARTESIAN_POINT('',(-7.360053770421E-18,-0.41));+#14856 = VECTOR('',#14857,1.);+#14857 = DIRECTION('',(1.,-1.454264753163E-33));+#14858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14859 = ORIENTED_EDGE('',*,*,#14860,.T.);+#14860 = EDGE_CURVE('',#14833,#14861,#14863,.T.);+#14861 = VERTEX_POINT('',#14862);+#14862 = CARTESIAN_POINT('',(2.724938966801,0.43,-1.665334536938E-16));+#14863 = SURFACE_CURVE('',#14864,(#14869,#14876),.PCURVE_S1.);+#14864 = CIRCLE('',#14865,0.3);+#14865 = AXIS2_PLACEMENT_3D('',#14866,#14867,#14868);+#14866 = CARTESIAN_POINT('',(2.724938966801,0.43,0.3));+#14867 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14868 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#14869 = PCURVE('',#1404,#14870);+#14870 = DEFINITIONAL_REPRESENTATION('',(#14871),#14875);+#14871 = CIRCLE('',#14872,0.3);+#14872 = AXIS2_PLACEMENT_2D('',#14873,#14874);+#14873 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#14874 = DIRECTION('',(-0.173648177667,0.984807753012));+#14875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14876 = PCURVE('',#14877,#14882);+#14877 = CYLINDRICAL_SURFACE('',#14878,0.3);+#14878 = AXIS2_PLACEMENT_3D('',#14879,#14880,#14881);+#14879 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3));+#14880 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14881 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#14882 = DEFINITIONAL_REPRESENTATION('',(#14883),#14887);+#14883 = LINE('',#14884,#14885);+#14884 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#14885 = VECTOR('',#14886,1.);+#14886 = DIRECTION('',(-1.,3.97569335183E-17));+#14887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14888 = ORIENTED_EDGE('',*,*,#14889,.T.);+#14889 = EDGE_CURVE('',#14861,#14890,#14892,.T.);+#14890 = VERTEX_POINT('',#14891);+#14891 = CARTESIAN_POINT('',(3.,0.43,-1.665334536938E-16));+#14892 = SURFACE_CURVE('',#14893,(#14897,#14904),.PCURVE_S1.);+#14893 = LINE('',#14894,#14895);+#14894 = CARTESIAN_POINT('',(2.724938966801,0.43,-1.665334536938E-16));+#14895 = VECTOR('',#14896,1.);+#14896 = DIRECTION('',(1.,1.110223024625E-16,0.));+#14897 = PCURVE('',#1404,#14898);+#14898 = DEFINITIONAL_REPRESENTATION('',(#14899),#14903);+#14899 = LINE('',#14900,#14901);+#14900 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#14901 = VECTOR('',#14902,1.);+#14902 = DIRECTION('',(0.,-1.));+#14903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14904 = PCURVE('',#14905,#14910);+#14905 = PLANE('',#14906);+#14906 = AXIS2_PLACEMENT_3D('',#14907,#14908,#14909);+#14907 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16));+#14908 = DIRECTION('',(0.,0.,1.));+#14909 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#14910 = DEFINITIONAL_REPRESENTATION('',(#14911),#14915);+#14911 = LINE('',#14912,#14913);+#14912 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#14913 = VECTOR('',#14914,1.);+#14914 = DIRECTION('',(1.,0.));+#14915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14916 = ORIENTED_EDGE('',*,*,#14917,.T.);+#14917 = EDGE_CURVE('',#14890,#14918,#14920,.T.);+#14918 = VERTEX_POINT('',#14919);+#14919 = CARTESIAN_POINT('',(3.,0.43,0.2));+#14920 = SURFACE_CURVE('',#14921,(#14925,#14932),.PCURVE_S1.);+#14921 = LINE('',#14922,#14923);+#14922 = CARTESIAN_POINT('',(3.,0.43,-1.665334536938E-16));+#14923 = VECTOR('',#14924,1.);+#14924 = DIRECTION('',(0.,0.,1.));+#14925 = PCURVE('',#1404,#14926);+#14926 = DEFINITIONAL_REPRESENTATION('',(#14927),#14931);+#14927 = LINE('',#14928,#14929);+#14928 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#14929 = VECTOR('',#14930,1.);+#14930 = DIRECTION('',(1.,0.));+#14931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14932 = PCURVE('',#14933,#14938);+#14933 = PLANE('',#14934);+#14934 = AXIS2_PLACEMENT_3D('',#14935,#14936,#14937);+#14935 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16));+#14936 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14937 = DIRECTION('',(0.,0.,1.));+#14938 = DEFINITIONAL_REPRESENTATION('',(#14939),#14943);+#14939 = LINE('',#14940,#14941);+#14940 = CARTESIAN_POINT('',(0.,-0.41));+#14941 = VECTOR('',#14942,1.);+#14942 = DIRECTION('',(1.,0.));+#14943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14944 = ORIENTED_EDGE('',*,*,#14945,.T.);+#14945 = EDGE_CURVE('',#14918,#14946,#14948,.T.);+#14946 = VERTEX_POINT('',#14947);+#14947 = CARTESIAN_POINT('',(2.724938966801,0.43,0.2));+#14948 = SURFACE_CURVE('',#14949,(#14953,#14960),.PCURVE_S1.);+#14949 = LINE('',#14950,#14951);+#14950 = CARTESIAN_POINT('',(3.,0.43,0.2));+#14951 = VECTOR('',#14952,1.);+#14952 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14953 = PCURVE('',#1404,#14954);+#14954 = DEFINITIONAL_REPRESENTATION('',(#14955),#14959);+#14955 = LINE('',#14956,#14957);+#14956 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#14957 = VECTOR('',#14958,1.);+#14958 = DIRECTION('',(0.,1.));+#14959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14960 = PCURVE('',#14961,#14966);+#14961 = PLANE('',#14962);+#14962 = AXIS2_PLACEMENT_3D('',#14963,#14964,#14965);+#14963 = CARTESIAN_POINT('',(3.,0.84,0.2));+#14964 = DIRECTION('',(0.,0.,-1.));+#14965 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#14966 = DEFINITIONAL_REPRESENTATION('',(#14967),#14971);+#14967 = LINE('',#14968,#14969);+#14968 = CARTESIAN_POINT('',(4.551914400962E-17,-0.41));+#14969 = VECTOR('',#14970,1.);+#14970 = DIRECTION('',(1.,0.));+#14971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14972 = ORIENTED_EDGE('',*,*,#14973,.T.);+#14973 = EDGE_CURVE('',#14946,#14974,#14976,.T.);+#14974 = VERTEX_POINT('',#14975);+#14975 = CARTESIAN_POINT('',(2.6264581915,0.43,0.282635182233));+#14976 = SURFACE_CURVE('',#14977,(#14982,#14993),.PCURVE_S1.);+#14977 = CIRCLE('',#14978,0.1);+#14978 = AXIS2_PLACEMENT_3D('',#14979,#14980,#14981);+#14979 = CARTESIAN_POINT('',(2.724938966801,0.43,0.3));+#14980 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14981 = DIRECTION('',(0.,0.,-1.));+#14982 = PCURVE('',#1404,#14983);+#14983 = DEFINITIONAL_REPRESENTATION('',(#14984),#14992);+#14984 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14985,#14986,#14987,#14988+ ,#14989,#14990,#14991),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14985 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14986 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#14987 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#14988 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#14989 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#14990 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#14991 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14993 = PCURVE('',#14994,#14999);+#14994 = CYLINDRICAL_SURFACE('',#14995,0.1);+#14995 = AXIS2_PLACEMENT_3D('',#14996,#14997,#14998);+#14996 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3));+#14997 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#14998 = DIRECTION('',(0.,0.,-1.));+#14999 = DEFINITIONAL_REPRESENTATION('',(#15000),#15004);+#15000 = LINE('',#15001,#15002);+#15001 = CARTESIAN_POINT('',(0.,-0.41));+#15002 = VECTOR('',#15003,1.);+#15003 = DIRECTION('',(1.,0.));+#15004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15005 = ORIENTED_EDGE('',*,*,#15006,.T.);+#15006 = EDGE_CURVE('',#14974,#15007,#15009,.T.);+#15007 = VERTEX_POINT('',#15008);+#15008 = CARTESIAN_POINT('',(2.545442325904,0.43,0.7770944533));+#15009 = SURFACE_CURVE('',#15010,(#15014,#15021),.PCURVE_S1.);+#15010 = LINE('',#15011,#15012);+#15011 = CARTESIAN_POINT('',(2.6264581915,0.43,0.282635182233));+#15012 = VECTOR('',#15013,1.);+#15013 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#15014 = PCURVE('',#1404,#15015);+#15015 = DEFINITIONAL_REPRESENTATION('',(#15016),#15020);+#15016 = LINE('',#15017,#15018);+#15017 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#15018 = VECTOR('',#15019,1.);+#15019 = DIRECTION('',(0.986841372087,0.161691392282));+#15020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15021 = PCURVE('',#15022,#15027);+#15022 = PLANE('',#15023);+#15023 = AXIS2_PLACEMENT_3D('',#15024,#15025,#15026);+#15024 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233));+#15025 = DIRECTION('',(-0.986841372087,-1.095614012943E-16,+ -0.161691392282));+#15026 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#15027 = DEFINITIONAL_REPRESENTATION('',(#15028),#15032);+#15028 = LINE('',#15029,#15030);+#15029 = CARTESIAN_POINT('',(7.360053770421E-18,-0.41));+#15030 = VECTOR('',#15031,1.);+#15031 = DIRECTION('',(1.,1.454264753163E-33));+#15032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15033 = ORIENTED_EDGE('',*,*,#15034,.T.);+#15034 = EDGE_CURVE('',#15007,#1361,#15035,.T.);+#15035 = SURFACE_CURVE('',#15036,(#15041,#15048),.PCURVE_S1.);+#15036 = CIRCLE('',#15037,0.3);+#15037 = AXIS2_PLACEMENT_3D('',#15038,#15039,#15040);+#15038 = CARTESIAN_POINT('',(2.25,0.43,0.725));+#15039 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15040 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#15041 = PCURVE('',#1404,#15042);+#15042 = DEFINITIONAL_REPRESENTATION('',(#15043),#15047);+#15043 = CIRCLE('',#15044,0.3);+#15044 = AXIS2_PLACEMENT_2D('',#15045,#15046);+#15045 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#15046 = DIRECTION('',(0.173648177667,-0.984807753012));+#15047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15048 = PCURVE('',#1376,#15049);+#15049 = DEFINITIONAL_REPRESENTATION('',(#15050),#15054);+#15050 = LINE('',#15051,#15052);+#15051 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#15052 = VECTOR('',#15053,1.);+#15053 = DIRECTION('',(-1.,0.));+#15054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15055 = ORIENTED_EDGE('',*,*,#1388,.T.);+#15056 = ADVANCED_FACE('',(#15057),#15022,.F.);+#15057 = FACE_BOUND('',#15058,.F.);+#15058 = EDGE_LOOP('',(#15059,#15082,#15083,#15106));+#15059 = ORIENTED_EDGE('',*,*,#15060,.T.);+#15060 = EDGE_CURVE('',#15061,#14974,#15063,.T.);+#15061 = VERTEX_POINT('',#15062);+#15062 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233));+#15063 = SURFACE_CURVE('',#15064,(#15068,#15075),.PCURVE_S1.);+#15064 = LINE('',#15065,#15066);+#15065 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233));+#15066 = VECTOR('',#15067,1.);+#15067 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15068 = PCURVE('',#15022,#15069);+#15069 = DEFINITIONAL_REPRESENTATION('',(#15070),#15074);+#15070 = LINE('',#15071,#15072);+#15071 = CARTESIAN_POINT('',(0.,0.));+#15072 = VECTOR('',#15073,1.);+#15073 = DIRECTION('',(5.505756095676E-29,-1.));+#15074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15075 = PCURVE('',#14994,#15076);+#15076 = DEFINITIONAL_REPRESENTATION('',(#15077),#15081);+#15077 = LINE('',#15078,#15079);+#15078 = CARTESIAN_POINT('',(1.396263401592,0.));+#15079 = VECTOR('',#15080,1.);+#15080 = DIRECTION('',(0.,-1.));+#15081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15082 = ORIENTED_EDGE('',*,*,#15006,.T.);+#15083 = ORIENTED_EDGE('',*,*,#15084,.F.);+#15084 = EDGE_CURVE('',#15085,#15007,#15087,.T.);+#15085 = VERTEX_POINT('',#15086);+#15086 = CARTESIAN_POINT('',(2.545442325904,0.84,0.7770944533));+#15087 = SURFACE_CURVE('',#15088,(#15092,#15099),.PCURVE_S1.);+#15088 = LINE('',#15089,#15090);+#15089 = CARTESIAN_POINT('',(2.545442325904,0.84,0.7770944533));+#15090 = VECTOR('',#15091,1.);+#15091 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15092 = PCURVE('',#15022,#15093);+#15093 = DEFINITIONAL_REPRESENTATION('',(#15094),#15098);+#15094 = LINE('',#15095,#15096);+#15095 = CARTESIAN_POINT('',(0.501052433606,8.994567934487E-18));+#15096 = VECTOR('',#15097,1.);+#15097 = DIRECTION('',(5.505756095676E-29,-1.));+#15098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15099 = PCURVE('',#1376,#15100);+#15100 = DEFINITIONAL_REPRESENTATION('',(#15101),#15105);+#15101 = LINE('',#15102,#15103);+#15102 = CARTESIAN_POINT('',(6.28318530718,-1.110223024625E-16));+#15103 = VECTOR('',#15104,1.);+#15104 = DIRECTION('',(0.,-1.));+#15105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15106 = ORIENTED_EDGE('',*,*,#15107,.F.);+#15107 = EDGE_CURVE('',#15061,#15085,#15108,.T.);+#15108 = SURFACE_CURVE('',#15109,(#15113,#15120),.PCURVE_S1.);+#15109 = LINE('',#15110,#15111);+#15110 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233));+#15111 = VECTOR('',#15112,1.);+#15112 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#15113 = PCURVE('',#15022,#15114);+#15114 = DEFINITIONAL_REPRESENTATION('',(#15115),#15119);+#15115 = LINE('',#15116,#15117);+#15116 = CARTESIAN_POINT('',(0.,0.));+#15117 = VECTOR('',#15118,1.);+#15118 = DIRECTION('',(1.,1.454264753163E-33));+#15119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15120 = PCURVE('',#1348,#15121);+#15121 = DEFINITIONAL_REPRESENTATION('',(#15122),#15126);+#15122 = LINE('',#15123,#15124);+#15123 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#15124 = VECTOR('',#15125,1.);+#15125 = DIRECTION('',(0.986841372087,0.161691392282));+#15126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15127 = ADVANCED_FACE('',(#15128),#14994,.F.);+#15128 = FACE_BOUND('',#15129,.F.);+#15129 = EDGE_LOOP('',(#15130,#15153,#15154,#15155));+#15130 = ORIENTED_EDGE('',*,*,#15131,.T.);+#15131 = EDGE_CURVE('',#15132,#14946,#15134,.T.);+#15132 = VERTEX_POINT('',#15133);+#15133 = CARTESIAN_POINT('',(2.724938966801,0.84,0.2));+#15134 = SURFACE_CURVE('',#15135,(#15139,#15146),.PCURVE_S1.);+#15135 = LINE('',#15136,#15137);+#15136 = CARTESIAN_POINT('',(2.724938966801,0.84,0.2));+#15137 = VECTOR('',#15138,1.);+#15138 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15139 = PCURVE('',#14994,#15140);+#15140 = DEFINITIONAL_REPRESENTATION('',(#15141),#15145);+#15141 = LINE('',#15142,#15143);+#15142 = CARTESIAN_POINT('',(0.,0.));+#15143 = VECTOR('',#15144,1.);+#15144 = DIRECTION('',(0.,-1.));+#15145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15146 = PCURVE('',#14961,#15147);+#15147 = DEFINITIONAL_REPRESENTATION('',(#15148),#15152);+#15148 = LINE('',#15149,#15150);+#15149 = CARTESIAN_POINT('',(0.275061033199,3.053790922347E-17));+#15150 = VECTOR('',#15151,1.);+#15151 = DIRECTION('',(0.,-1.));+#15152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15153 = ORIENTED_EDGE('',*,*,#14973,.T.);+#15154 = ORIENTED_EDGE('',*,*,#15060,.F.);+#15155 = ORIENTED_EDGE('',*,*,#15156,.F.);+#15156 = EDGE_CURVE('',#15132,#15061,#15157,.T.);+#15157 = SURFACE_CURVE('',#15158,(#15163,#15170),.PCURVE_S1.);+#15158 = CIRCLE('',#15159,0.1);+#15159 = AXIS2_PLACEMENT_3D('',#15160,#15161,#15162);+#15160 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3));+#15161 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#15162 = DIRECTION('',(0.,0.,-1.));+#15163 = PCURVE('',#14994,#15164);+#15164 = DEFINITIONAL_REPRESENTATION('',(#15165),#15169);+#15165 = LINE('',#15166,#15167);+#15166 = CARTESIAN_POINT('',(0.,0.));+#15167 = VECTOR('',#15168,1.);+#15168 = DIRECTION('',(1.,0.));+#15169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15170 = PCURVE('',#1348,#15171);+#15171 = DEFINITIONAL_REPRESENTATION('',(#15172),#15180);+#15172 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15173,#15174,#15175,#15176+ ,#15177,#15178,#15179),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15173 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15174 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#15175 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#15176 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#15177 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#15178 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#15179 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15181 = ADVANCED_FACE('',(#15182),#14961,.F.);+#15182 = FACE_BOUND('',#15183,.F.);+#15183 = EDGE_LOOP('',(#15184,#15207,#15208,#15209));+#15184 = ORIENTED_EDGE('',*,*,#15185,.T.);+#15185 = EDGE_CURVE('',#15186,#14918,#15188,.T.);+#15186 = VERTEX_POINT('',#15187);+#15187 = CARTESIAN_POINT('',(3.,0.84,0.2));+#15188 = SURFACE_CURVE('',#15189,(#15193,#15200),.PCURVE_S1.);+#15189 = LINE('',#15190,#15191);+#15190 = CARTESIAN_POINT('',(3.,0.84,0.2));+#15191 = VECTOR('',#15192,1.);+#15192 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15193 = PCURVE('',#14961,#15194);+#15194 = DEFINITIONAL_REPRESENTATION('',(#15195),#15199);+#15195 = LINE('',#15196,#15197);+#15196 = CARTESIAN_POINT('',(-0.,0.));+#15197 = VECTOR('',#15198,1.);+#15198 = DIRECTION('',(0.,-1.));+#15199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15200 = PCURVE('',#14933,#15201);+#15201 = DEFINITIONAL_REPRESENTATION('',(#15202),#15206);+#15202 = LINE('',#15203,#15204);+#15203 = CARTESIAN_POINT('',(0.2,0.));+#15204 = VECTOR('',#15205,1.);+#15205 = DIRECTION('',(0.,-1.));+#15206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15207 = ORIENTED_EDGE('',*,*,#14945,.T.);+#15208 = ORIENTED_EDGE('',*,*,#15131,.F.);+#15209 = ORIENTED_EDGE('',*,*,#15210,.F.);+#15210 = EDGE_CURVE('',#15186,#15132,#15211,.T.);+#15211 = SURFACE_CURVE('',#15212,(#15216,#15223),.PCURVE_S1.);+#15212 = LINE('',#15213,#15214);+#15213 = CARTESIAN_POINT('',(3.,0.84,0.2));+#15214 = VECTOR('',#15215,1.);+#15215 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#15216 = PCURVE('',#14961,#15217);+#15217 = DEFINITIONAL_REPRESENTATION('',(#15218),#15222);+#15218 = LINE('',#15219,#15220);+#15219 = CARTESIAN_POINT('',(-0.,0.));+#15220 = VECTOR('',#15221,1.);+#15221 = DIRECTION('',(1.,0.));+#15222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15223 = PCURVE('',#1348,#15224);+#15224 = DEFINITIONAL_REPRESENTATION('',(#15225),#15229);+#15225 = LINE('',#15226,#15227);+#15226 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#15227 = VECTOR('',#15228,1.);+#15228 = DIRECTION('',(0.,1.));+#15229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15230 = ADVANCED_FACE('',(#15231),#14933,.F.);+#15231 = FACE_BOUND('',#15232,.F.);+#15232 = EDGE_LOOP('',(#15233,#15256,#15257,#15258));+#15233 = ORIENTED_EDGE('',*,*,#15234,.T.);+#15234 = EDGE_CURVE('',#15235,#14890,#15237,.T.);+#15235 = VERTEX_POINT('',#15236);+#15236 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16));+#15237 = SURFACE_CURVE('',#15238,(#15242,#15249),.PCURVE_S1.);+#15238 = LINE('',#15239,#15240);+#15239 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16));+#15240 = VECTOR('',#15241,1.);+#15241 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15242 = PCURVE('',#14933,#15243);+#15243 = DEFINITIONAL_REPRESENTATION('',(#15244),#15248);+#15244 = LINE('',#15245,#15246);+#15245 = CARTESIAN_POINT('',(0.,0.));+#15246 = VECTOR('',#15247,1.);+#15247 = DIRECTION('',(0.,-1.));+#15248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15249 = PCURVE('',#14905,#15250);+#15250 = DEFINITIONAL_REPRESENTATION('',(#15251),#15255);+#15251 = LINE('',#15252,#15253);+#15252 = CARTESIAN_POINT('',(0.275061033199,-3.053790922347E-17));+#15253 = VECTOR('',#15254,1.);+#15254 = DIRECTION('',(0.,-1.));+#15255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15256 = ORIENTED_EDGE('',*,*,#14917,.T.);+#15257 = ORIENTED_EDGE('',*,*,#15185,.F.);+#15258 = ORIENTED_EDGE('',*,*,#15259,.F.);+#15259 = EDGE_CURVE('',#15235,#15186,#15260,.T.);+#15260 = SURFACE_CURVE('',#15261,(#15265,#15272),.PCURVE_S1.);+#15261 = LINE('',#15262,#15263);+#15262 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16));+#15263 = VECTOR('',#15264,1.);+#15264 = DIRECTION('',(0.,0.,1.));+#15265 = PCURVE('',#14933,#15266);+#15266 = DEFINITIONAL_REPRESENTATION('',(#15267),#15271);+#15267 = LINE('',#15268,#15269);+#15268 = CARTESIAN_POINT('',(0.,0.));+#15269 = VECTOR('',#15270,1.);+#15270 = DIRECTION('',(1.,0.));+#15271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15272 = PCURVE('',#1348,#15273);+#15273 = DEFINITIONAL_REPRESENTATION('',(#15274),#15278);+#15274 = LINE('',#15275,#15276);+#15275 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#15276 = VECTOR('',#15277,1.);+#15277 = DIRECTION('',(1.,0.));+#15278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15279 = ADVANCED_FACE('',(#15280),#14905,.F.);+#15280 = FACE_BOUND('',#15281,.F.);+#15281 = EDGE_LOOP('',(#15282,#15305,#15306,#15307));+#15282 = ORIENTED_EDGE('',*,*,#15283,.T.);+#15283 = EDGE_CURVE('',#15284,#14861,#15286,.T.);+#15284 = VERTEX_POINT('',#15285);+#15285 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16));+#15286 = SURFACE_CURVE('',#15287,(#15291,#15298),.PCURVE_S1.);+#15287 = LINE('',#15288,#15289);+#15288 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16));+#15289 = VECTOR('',#15290,1.);+#15290 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15291 = PCURVE('',#14905,#15292);+#15292 = DEFINITIONAL_REPRESENTATION('',(#15293),#15297);+#15293 = LINE('',#15294,#15295);+#15294 = CARTESIAN_POINT('',(0.,0.));+#15295 = VECTOR('',#15296,1.);+#15296 = DIRECTION('',(0.,-1.));+#15297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15298 = PCURVE('',#14877,#15299);+#15299 = DEFINITIONAL_REPRESENTATION('',(#15300),#15304);+#15300 = LINE('',#15301,#15302);+#15301 = CARTESIAN_POINT('',(4.886921905584,0.));+#15302 = VECTOR('',#15303,1.);+#15303 = DIRECTION('',(0.,-1.));+#15304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15305 = ORIENTED_EDGE('',*,*,#14889,.T.);+#15306 = ORIENTED_EDGE('',*,*,#15234,.F.);+#15307 = ORIENTED_EDGE('',*,*,#15308,.F.);+#15308 = EDGE_CURVE('',#15284,#15235,#15309,.T.);+#15309 = SURFACE_CURVE('',#15310,(#15314,#15321),.PCURVE_S1.);+#15310 = LINE('',#15311,#15312);+#15311 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16));+#15312 = VECTOR('',#15313,1.);+#15313 = DIRECTION('',(1.,1.110223024625E-16,0.));+#15314 = PCURVE('',#14905,#15315);+#15315 = DEFINITIONAL_REPRESENTATION('',(#15316),#15320);+#15316 = LINE('',#15317,#15318);+#15317 = CARTESIAN_POINT('',(0.,0.));+#15318 = VECTOR('',#15319,1.);+#15319 = DIRECTION('',(1.,0.));+#15320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15321 = PCURVE('',#1348,#15322);+#15322 = DEFINITIONAL_REPRESENTATION('',(#15323),#15327);+#15323 = LINE('',#15324,#15325);+#15324 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#15325 = VECTOR('',#15326,1.);+#15326 = DIRECTION('',(0.,-1.));+#15327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15328 = ADVANCED_FACE('',(#15329),#14877,.T.);+#15329 = FACE_BOUND('',#15330,.T.);+#15330 = EDGE_LOOP('',(#15331,#15355,#15356,#15357));+#15331 = ORIENTED_EDGE('',*,*,#15332,.T.);+#15332 = EDGE_CURVE('',#15333,#15284,#15335,.T.);+#15333 = VERTEX_POINT('',#15334);+#15334 = CARTESIAN_POINT('',(2.429496640897,0.84,0.2479055467));+#15335 = SURFACE_CURVE('',#15336,(#15341,#15348),.PCURVE_S1.);+#15336 = CIRCLE('',#15337,0.3);+#15337 = AXIS2_PLACEMENT_3D('',#15338,#15339,#15340);+#15338 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3));+#15339 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15340 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#15341 = PCURVE('',#14877,#15342);+#15342 = DEFINITIONAL_REPRESENTATION('',(#15343),#15347);+#15343 = LINE('',#15344,#15345);+#15344 = CARTESIAN_POINT('',(6.28318530718,1.110223024625E-16));+#15345 = VECTOR('',#15346,1.);+#15346 = DIRECTION('',(-1.,-7.951386703659E-17));+#15347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15348 = PCURVE('',#1348,#15349);+#15349 = DEFINITIONAL_REPRESENTATION('',(#15350),#15354);+#15350 = CIRCLE('',#15351,0.3);+#15351 = AXIS2_PLACEMENT_2D('',#15352,#15353);+#15352 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#15353 = DIRECTION('',(-0.173648177667,0.984807753012));+#15354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15355 = ORIENTED_EDGE('',*,*,#15283,.T.);+#15356 = ORIENTED_EDGE('',*,*,#14860,.F.);+#15357 = ORIENTED_EDGE('',*,*,#15358,.F.);+#15358 = EDGE_CURVE('',#15333,#14833,#15359,.T.);+#15359 = SURFACE_CURVE('',#15360,(#15364,#15371),.PCURVE_S1.);+#15360 = LINE('',#15361,#15362);+#15361 = CARTESIAN_POINT('',(2.429496640897,0.84,0.2479055467));+#15362 = VECTOR('',#15363,1.);+#15363 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15364 = PCURVE('',#14877,#15365);+#15365 = DEFINITIONAL_REPRESENTATION('',(#15366),#15370);+#15366 = LINE('',#15367,#15368);+#15367 = CARTESIAN_POINT('',(6.28318530718,1.110223024625E-16));+#15368 = VECTOR('',#15369,1.);+#15369 = DIRECTION('',(0.,-1.));+#15370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15371 = PCURVE('',#14848,#15372);+#15372 = DEFINITIONAL_REPRESENTATION('',(#15373),#15377);+#15373 = LINE('',#15374,#15375);+#15374 = CARTESIAN_POINT('',(0.501052433606,-8.994567934487E-18));+#15375 = VECTOR('',#15376,1.);+#15376 = DIRECTION('',(-5.505756095676E-29,-1.));+#15377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15378 = ADVANCED_FACE('',(#15379),#14848,.F.);+#15379 = FACE_BOUND('',#15380,.F.);+#15380 = EDGE_LOOP('',(#15381,#15404,#15405,#15406));+#15381 = ORIENTED_EDGE('',*,*,#15382,.T.);+#15382 = EDGE_CURVE('',#15383,#14800,#15385,.T.);+#15383 = VERTEX_POINT('',#15384);+#15384 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767));+#15385 = SURFACE_CURVE('',#15386,(#15390,#15397),.PCURVE_S1.);+#15386 = LINE('',#15387,#15388);+#15387 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767));+#15388 = VECTOR('',#15389,1.);+#15389 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15390 = PCURVE('',#14848,#15391);+#15391 = DEFINITIONAL_REPRESENTATION('',(#15392),#15396);+#15392 = LINE('',#15393,#15394);+#15393 = CARTESIAN_POINT('',(0.,0.));+#15394 = VECTOR('',#15395,1.);+#15395 = DIRECTION('',(-5.505756095676E-29,-1.));+#15396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15397 = PCURVE('',#14820,#15398);+#15398 = DEFINITIONAL_REPRESENTATION('',(#15399),#15403);+#15399 = LINE('',#15400,#15401);+#15400 = CARTESIAN_POINT('',(1.396263401592,0.));+#15401 = VECTOR('',#15402,1.);+#15402 = DIRECTION('',(0.,-1.));+#15403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15404 = ORIENTED_EDGE('',*,*,#14832,.T.);+#15405 = ORIENTED_EDGE('',*,*,#15358,.F.);+#15406 = ORIENTED_EDGE('',*,*,#15407,.F.);+#15407 = EDGE_CURVE('',#15383,#15333,#15408,.T.);+#15408 = SURFACE_CURVE('',#15409,(#15413,#15420),.PCURVE_S1.);+#15409 = LINE('',#15410,#15411);+#15410 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767));+#15411 = VECTOR('',#15412,1.);+#15412 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#15413 = PCURVE('',#14848,#15414);+#15414 = DEFINITIONAL_REPRESENTATION('',(#15415),#15419);+#15415 = LINE('',#15416,#15417);+#15416 = CARTESIAN_POINT('',(0.,0.));+#15417 = VECTOR('',#15418,1.);+#15418 = DIRECTION('',(1.,-1.454264753163E-33));+#15419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15420 = PCURVE('',#1348,#15421);+#15421 = DEFINITIONAL_REPRESENTATION('',(#15422),#15426);+#15422 = LINE('',#15423,#15424);+#15423 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#15424 = VECTOR('',#15425,1.);+#15425 = DIRECTION('',(-0.986841372087,-0.161691392282));+#15426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15427 = ADVANCED_FACE('',(#15428),#14820,.F.);+#15428 = FACE_BOUND('',#15429,.F.);+#15429 = EDGE_LOOP('',(#15430,#15453,#15454,#15455));+#15430 = ORIENTED_EDGE('',*,*,#15431,.T.);+#15431 = EDGE_CURVE('',#15432,#14777,#15434,.T.);+#15432 = VERTEX_POINT('',#15433);+#15433 = CARTESIAN_POINT('',(2.25,0.84,0.825));+#15434 = SURFACE_CURVE('',#15435,(#15439,#15446),.PCURVE_S1.);+#15435 = LINE('',#15436,#15437);+#15436 = CARTESIAN_POINT('',(2.25,0.84,0.825));+#15437 = VECTOR('',#15438,1.);+#15438 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15439 = PCURVE('',#14820,#15440);+#15440 = DEFINITIONAL_REPRESENTATION('',(#15441),#15445);+#15441 = LINE('',#15442,#15443);+#15442 = CARTESIAN_POINT('',(0.,0.));+#15443 = VECTOR('',#15444,1.);+#15444 = DIRECTION('',(0.,-1.));+#15445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15446 = PCURVE('',#958,#15447);+#15447 = DEFINITIONAL_REPRESENTATION('',(#15448),#15452);+#15448 = LINE('',#15449,#15450);+#15449 = CARTESIAN_POINT('',(0.45,-4.996003610812E-17));+#15450 = VECTOR('',#15451,1.);+#15451 = DIRECTION('',(0.,-1.));+#15452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15453 = ORIENTED_EDGE('',*,*,#14799,.T.);+#15454 = ORIENTED_EDGE('',*,*,#15382,.F.);+#15455 = ORIENTED_EDGE('',*,*,#15456,.F.);+#15456 = EDGE_CURVE('',#15432,#15383,#15457,.T.);+#15457 = SURFACE_CURVE('',#15458,(#15463,#15470),.PCURVE_S1.);+#15458 = CIRCLE('',#15459,0.1);+#15459 = AXIS2_PLACEMENT_3D('',#15460,#15461,#15462);+#15460 = CARTESIAN_POINT('',(2.25,0.84,0.725));+#15461 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#15462 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#15463 = PCURVE('',#14820,#15464);+#15464 = DEFINITIONAL_REPRESENTATION('',(#15465),#15469);+#15465 = LINE('',#15466,#15467);+#15466 = CARTESIAN_POINT('',(0.,0.));+#15467 = VECTOR('',#15468,1.);+#15468 = DIRECTION('',(1.,0.));+#15469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15470 = PCURVE('',#1348,#15471);+#15471 = DEFINITIONAL_REPRESENTATION('',(#15472),#15480);+#15472 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15473,#15474,#15475,#15476+ ,#15477,#15478,#15479),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15473 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15474 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#15475 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#15476 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#15477 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#15478 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#15479 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15481 = ADVANCED_FACE('',(#15482),#1376,.T.);+#15482 = FACE_BOUND('',#15483,.T.);+#15483 = EDGE_LOOP('',(#15484,#15506,#15507,#15508));+#15484 = ORIENTED_EDGE('',*,*,#15485,.T.);+#15485 = EDGE_CURVE('',#15085,#1333,#15486,.T.);+#15486 = SURFACE_CURVE('',#15487,(#15492,#15499),.PCURVE_S1.);+#15487 = CIRCLE('',#15488,0.3);+#15488 = AXIS2_PLACEMENT_3D('',#15489,#15490,#15491);+#15489 = CARTESIAN_POINT('',(2.25,0.84,0.725));+#15490 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15491 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#15492 = PCURVE('',#1376,#15493);+#15493 = DEFINITIONAL_REPRESENTATION('',(#15494),#15498);+#15494 = LINE('',#15495,#15496);+#15495 = CARTESIAN_POINT('',(6.28318530718,-1.110223024625E-16));+#15496 = VECTOR('',#15497,1.);+#15497 = DIRECTION('',(-1.,7.951386703659E-17));+#15498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15499 = PCURVE('',#1348,#15500);+#15500 = DEFINITIONAL_REPRESENTATION('',(#15501),#15505);+#15501 = CIRCLE('',#15502,0.3);+#15502 = AXIS2_PLACEMENT_2D('',#15503,#15504);+#15503 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#15504 = DIRECTION('',(0.173648177667,-0.984807753012));+#15505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15506 = ORIENTED_EDGE('',*,*,#1360,.T.);+#15507 = ORIENTED_EDGE('',*,*,#15034,.F.);+#15508 = ORIENTED_EDGE('',*,*,#15084,.F.);+#15509 = ADVANCED_FACE('',(#15510),#1348,.F.);+#15510 = FACE_BOUND('',#15511,.F.);+#15511 = EDGE_LOOP('',(#15512,#15533,#15554,#15555,#15556,#15557,#15558,+ #15559,#15560,#15561,#15562,#15563));+#15512 = ORIENTED_EDGE('',*,*,#15513,.F.);+#15513 = EDGE_CURVE('',#943,#1310,#15514,.T.);+#15514 = SURFACE_CURVE('',#15515,(#15519,#15526),.PCURVE_S1.);+#15515 = LINE('',#15516,#15517);+#15516 = CARTESIAN_POINT('',(1.95,0.84,0.786976568901));+#15517 = VECTOR('',#15518,1.);+#15518 = DIRECTION('',(0.,0.,1.));+#15519 = PCURVE('',#1348,#15520);+#15520 = DEFINITIONAL_REPRESENTATION('',(#15521),#15525);+#15521 = LINE('',#15522,#15523);+#15522 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#15523 = VECTOR('',#15524,1.);+#15524 = DIRECTION('',(1.,0.));+#15525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15526 = PCURVE('',#986,#15527);+#15527 = DEFINITIONAL_REPRESENTATION('',(#15528),#15532);+#15528 = LINE('',#15529,#15530);+#15529 = CARTESIAN_POINT('',(1.435,-0.238023431099));+#15530 = VECTOR('',#15531,1.);+#15531 = DIRECTION('',(0.,1.));+#15532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15533 = ORIENTED_EDGE('',*,*,#15534,.T.);+#15534 = EDGE_CURVE('',#943,#15432,#15535,.T.);+#15535 = SURFACE_CURVE('',#15536,(#15540,#15547),.PCURVE_S1.);+#15536 = LINE('',#15537,#15538);+#15537 = CARTESIAN_POINT('',(1.8,0.84,0.825));+#15538 = VECTOR('',#15539,1.);+#15539 = DIRECTION('',(1.,1.110223024625E-16,0.));+#15540 = PCURVE('',#1348,#15541);+#15541 = DEFINITIONAL_REPRESENTATION('',(#15542),#15546);+#15542 = LINE('',#15543,#15544);+#15543 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#15544 = VECTOR('',#15545,1.);+#15545 = DIRECTION('',(0.,-1.));+#15546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15547 = PCURVE('',#958,#15548);+#15548 = DEFINITIONAL_REPRESENTATION('',(#15549),#15553);+#15549 = LINE('',#15550,#15551);+#15550 = CARTESIAN_POINT('',(0.,0.));+#15551 = VECTOR('',#15552,1.);+#15552 = DIRECTION('',(1.,0.));+#15553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15554 = ORIENTED_EDGE('',*,*,#15456,.T.);+#15555 = ORIENTED_EDGE('',*,*,#15407,.T.);+#15556 = ORIENTED_EDGE('',*,*,#15332,.T.);+#15557 = ORIENTED_EDGE('',*,*,#15308,.T.);+#15558 = ORIENTED_EDGE('',*,*,#15259,.T.);+#15559 = ORIENTED_EDGE('',*,*,#15210,.T.);+#15560 = ORIENTED_EDGE('',*,*,#15156,.T.);+#15561 = ORIENTED_EDGE('',*,*,#15107,.T.);+#15562 = ORIENTED_EDGE('',*,*,#15485,.T.);+#15563 = ORIENTED_EDGE('',*,*,#1332,.T.);+#15564 = ADVANCED_FACE('',(#15565),#1297,.T.);+#15565 = FACE_BOUND('',#15566,.T.);+#15566 = EDGE_LOOP('',(#15567,#15588,#15611,#15644,#15672,#15701,#15729,+ #15757,#15785,#15818,#15846,#15868));+#15567 = ORIENTED_EDGE('',*,*,#15568,.F.);+#15568 = EDGE_CURVE('',#971,#1282,#15569,.T.);+#15569 = SURFACE_CURVE('',#15570,(#15574,#15581),.PCURVE_S1.);+#15570 = LINE('',#15571,#15572);+#15571 = CARTESIAN_POINT('',(1.95,1.7,0.786976568901));+#15572 = VECTOR('',#15573,1.);+#15573 = DIRECTION('',(0.,0.,1.));+#15574 = PCURVE('',#1297,#15575);+#15575 = DEFINITIONAL_REPRESENTATION('',(#15576),#15580);+#15576 = LINE('',#15577,#15578);+#15577 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#15578 = VECTOR('',#15579,1.);+#15579 = DIRECTION('',(1.,0.));+#15580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15581 = PCURVE('',#986,#15582);+#15582 = DEFINITIONAL_REPRESENTATION('',(#15583),#15587);+#15583 = LINE('',#15584,#15585);+#15584 = CARTESIAN_POINT('',(0.575,-0.238023431099));+#15585 = VECTOR('',#15586,1.);+#15586 = DIRECTION('',(0.,1.));+#15587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15588 = ORIENTED_EDGE('',*,*,#15589,.T.);+#15589 = EDGE_CURVE('',#971,#15590,#15592,.T.);+#15590 = VERTEX_POINT('',#15591);+#15591 = CARTESIAN_POINT('',(2.25,1.7,0.825));+#15592 = SURFACE_CURVE('',#15593,(#15597,#15604),.PCURVE_S1.);+#15593 = LINE('',#15594,#15595);+#15594 = CARTESIAN_POINT('',(1.8,1.7,0.825));+#15595 = VECTOR('',#15596,1.);+#15596 = DIRECTION('',(1.,1.110223024625E-16,0.));+#15597 = PCURVE('',#1297,#15598);+#15598 = DEFINITIONAL_REPRESENTATION('',(#15599),#15603);+#15599 = LINE('',#15600,#15601);+#15600 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#15601 = VECTOR('',#15602,1.);+#15602 = DIRECTION('',(0.,-1.));+#15603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15604 = PCURVE('',#1014,#15605);+#15605 = DEFINITIONAL_REPRESENTATION('',(#15606),#15610);+#15606 = LINE('',#15607,#15608);+#15607 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#15608 = VECTOR('',#15609,1.);+#15609 = DIRECTION('',(1.,0.));+#15610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15611 = ORIENTED_EDGE('',*,*,#15612,.T.);+#15612 = EDGE_CURVE('',#15590,#15613,#15615,.T.);+#15613 = VERTEX_POINT('',#15614);+#15614 = CARTESIAN_POINT('',(2.348480775301,1.7,0.742364817767));+#15615 = SURFACE_CURVE('',#15616,(#15621,#15632),.PCURVE_S1.);+#15616 = CIRCLE('',#15617,0.1);+#15617 = AXIS2_PLACEMENT_3D('',#15618,#15619,#15620);+#15618 = CARTESIAN_POINT('',(2.25,1.7,0.725));+#15619 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#15620 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#15621 = PCURVE('',#1297,#15622);+#15622 = DEFINITIONAL_REPRESENTATION('',(#15623),#15631);+#15623 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15624,#15625,#15626,#15627+ ,#15628,#15629,#15630),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15624 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15625 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#15626 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#15627 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#15628 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#15629 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#15630 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15632 = PCURVE('',#15633,#15638);+#15633 = CYLINDRICAL_SURFACE('',#15634,0.1);+#15634 = AXIS2_PLACEMENT_3D('',#15635,#15636,#15637);+#15635 = CARTESIAN_POINT('',(2.25,2.11,0.725));+#15636 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#15637 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#15638 = DEFINITIONAL_REPRESENTATION('',(#15639),#15643);+#15639 = LINE('',#15640,#15641);+#15640 = CARTESIAN_POINT('',(0.,-0.41));+#15641 = VECTOR('',#15642,1.);+#15642 = DIRECTION('',(1.,0.));+#15643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15644 = ORIENTED_EDGE('',*,*,#15645,.T.);+#15645 = EDGE_CURVE('',#15613,#15646,#15648,.T.);+#15646 = VERTEX_POINT('',#15647);+#15647 = CARTESIAN_POINT('',(2.429496640897,1.7,0.2479055467));+#15648 = SURFACE_CURVE('',#15649,(#15653,#15660),.PCURVE_S1.);+#15649 = LINE('',#15650,#15651);+#15650 = CARTESIAN_POINT('',(2.348480775301,1.7,0.742364817767));+#15651 = VECTOR('',#15652,1.);+#15652 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#15653 = PCURVE('',#1297,#15654);+#15654 = DEFINITIONAL_REPRESENTATION('',(#15655),#15659);+#15655 = LINE('',#15656,#15657);+#15656 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#15657 = VECTOR('',#15658,1.);+#15658 = DIRECTION('',(-0.986841372087,-0.161691392282));+#15659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15660 = PCURVE('',#15661,#15666);+#15661 = PLANE('',#15662);+#15662 = AXIS2_PLACEMENT_3D('',#15663,#15664,#15665);+#15663 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767));+#15664 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282)+ );+#15665 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#15666 = DEFINITIONAL_REPRESENTATION('',(#15667),#15671);+#15667 = LINE('',#15668,#15669);+#15668 = CARTESIAN_POINT('',(-7.360053770421E-18,-0.41));+#15669 = VECTOR('',#15670,1.);+#15670 = DIRECTION('',(1.,-1.454264753163E-33));+#15671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15672 = ORIENTED_EDGE('',*,*,#15673,.T.);+#15673 = EDGE_CURVE('',#15646,#15674,#15676,.T.);+#15674 = VERTEX_POINT('',#15675);+#15675 = CARTESIAN_POINT('',(2.724938966801,1.7,-1.665334536938E-16));+#15676 = SURFACE_CURVE('',#15677,(#15682,#15689),.PCURVE_S1.);+#15677 = CIRCLE('',#15678,0.3);+#15678 = AXIS2_PLACEMENT_3D('',#15679,#15680,#15681);+#15679 = CARTESIAN_POINT('',(2.724938966801,1.7,0.3));+#15680 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15681 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#15682 = PCURVE('',#1297,#15683);+#15683 = DEFINITIONAL_REPRESENTATION('',(#15684),#15688);+#15684 = CIRCLE('',#15685,0.3);+#15685 = AXIS2_PLACEMENT_2D('',#15686,#15687);+#15686 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#15687 = DIRECTION('',(-0.173648177667,0.984807753012));+#15688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15689 = PCURVE('',#15690,#15695);+#15690 = CYLINDRICAL_SURFACE('',#15691,0.3);+#15691 = AXIS2_PLACEMENT_3D('',#15692,#15693,#15694);+#15692 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3));+#15693 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#15694 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#15695 = DEFINITIONAL_REPRESENTATION('',(#15696),#15700);+#15696 = LINE('',#15697,#15698);+#15697 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#15698 = VECTOR('',#15699,1.);+#15699 = DIRECTION('',(-1.,0.));+#15700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15701 = ORIENTED_EDGE('',*,*,#15702,.T.);+#15702 = EDGE_CURVE('',#15674,#15703,#15705,.T.);+#15703 = VERTEX_POINT('',#15704);+#15704 = CARTESIAN_POINT('',(3.,1.7,-1.665334536938E-16));+#15705 = SURFACE_CURVE('',#15706,(#15710,#15717),.PCURVE_S1.);+#15706 = LINE('',#15707,#15708);+#15707 = CARTESIAN_POINT('',(2.724938966801,1.7,-1.665334536938E-16));+#15708 = VECTOR('',#15709,1.);+#15709 = DIRECTION('',(1.,1.110223024625E-16,0.));+#15710 = PCURVE('',#1297,#15711);+#15711 = DEFINITIONAL_REPRESENTATION('',(#15712),#15716);+#15712 = LINE('',#15713,#15714);+#15713 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#15714 = VECTOR('',#15715,1.);+#15715 = DIRECTION('',(0.,-1.));+#15716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15717 = PCURVE('',#15718,#15723);+#15718 = PLANE('',#15719);+#15719 = AXIS2_PLACEMENT_3D('',#15720,#15721,#15722);+#15720 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16));+#15721 = DIRECTION('',(0.,0.,1.));+#15722 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#15723 = DEFINITIONAL_REPRESENTATION('',(#15724),#15728);+#15724 = LINE('',#15725,#15726);+#15725 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#15726 = VECTOR('',#15727,1.);+#15727 = DIRECTION('',(1.,0.));+#15728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15729 = ORIENTED_EDGE('',*,*,#15730,.T.);+#15730 = EDGE_CURVE('',#15703,#15731,#15733,.T.);+#15731 = VERTEX_POINT('',#15732);+#15732 = CARTESIAN_POINT('',(3.,1.7,0.2));+#15733 = SURFACE_CURVE('',#15734,(#15738,#15745),.PCURVE_S1.);+#15734 = LINE('',#15735,#15736);+#15735 = CARTESIAN_POINT('',(3.,1.7,-1.665334536938E-16));+#15736 = VECTOR('',#15737,1.);+#15737 = DIRECTION('',(0.,0.,1.));+#15738 = PCURVE('',#1297,#15739);+#15739 = DEFINITIONAL_REPRESENTATION('',(#15740),#15744);+#15740 = LINE('',#15741,#15742);+#15741 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#15742 = VECTOR('',#15743,1.);+#15743 = DIRECTION('',(1.,0.));+#15744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15745 = PCURVE('',#15746,#15751);+#15746 = PLANE('',#15747);+#15747 = AXIS2_PLACEMENT_3D('',#15748,#15749,#15750);+#15748 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16));+#15749 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#15750 = DIRECTION('',(0.,0.,1.));+#15751 = DEFINITIONAL_REPRESENTATION('',(#15752),#15756);+#15752 = LINE('',#15753,#15754);+#15753 = CARTESIAN_POINT('',(0.,-0.41));+#15754 = VECTOR('',#15755,1.);+#15755 = DIRECTION('',(1.,0.));+#15756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15757 = ORIENTED_EDGE('',*,*,#15758,.T.);+#15758 = EDGE_CURVE('',#15731,#15759,#15761,.T.);+#15759 = VERTEX_POINT('',#15760);+#15760 = CARTESIAN_POINT('',(2.724938966801,1.7,0.2));+#15761 = SURFACE_CURVE('',#15762,(#15766,#15773),.PCURVE_S1.);+#15762 = LINE('',#15763,#15764);+#15763 = CARTESIAN_POINT('',(3.,1.7,0.2));+#15764 = VECTOR('',#15765,1.);+#15765 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#15766 = PCURVE('',#1297,#15767);+#15767 = DEFINITIONAL_REPRESENTATION('',(#15768),#15772);+#15768 = LINE('',#15769,#15770);+#15769 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#15770 = VECTOR('',#15771,1.);+#15771 = DIRECTION('',(0.,1.));+#15772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15773 = PCURVE('',#15774,#15779);+#15774 = PLANE('',#15775);+#15775 = AXIS2_PLACEMENT_3D('',#15776,#15777,#15778);+#15776 = CARTESIAN_POINT('',(3.,2.11,0.2));+#15777 = DIRECTION('',(0.,0.,-1.));+#15778 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#15779 = DEFINITIONAL_REPRESENTATION('',(#15780),#15784);+#15780 = LINE('',#15781,#15782);+#15781 = CARTESIAN_POINT('',(4.551914400962E-17,-0.41));+#15782 = VECTOR('',#15783,1.);+#15783 = DIRECTION('',(1.,0.));+#15784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15785 = ORIENTED_EDGE('',*,*,#15786,.T.);+#15786 = EDGE_CURVE('',#15759,#15787,#15789,.T.);+#15787 = VERTEX_POINT('',#15788);+#15788 = CARTESIAN_POINT('',(2.6264581915,1.7,0.282635182233));+#15789 = SURFACE_CURVE('',#15790,(#15795,#15806),.PCURVE_S1.);+#15790 = CIRCLE('',#15791,0.1);+#15791 = AXIS2_PLACEMENT_3D('',#15792,#15793,#15794);+#15792 = CARTESIAN_POINT('',(2.724938966801,1.7,0.3));+#15793 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#15794 = DIRECTION('',(0.,0.,-1.));+#15795 = PCURVE('',#1297,#15796);+#15796 = DEFINITIONAL_REPRESENTATION('',(#15797),#15805);+#15797 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15798,#15799,#15800,#15801+ ,#15802,#15803,#15804),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15798 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15799 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#15800 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#15801 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#15802 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#15803 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#15804 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15806 = PCURVE('',#15807,#15812);+#15807 = CYLINDRICAL_SURFACE('',#15808,0.1);+#15808 = AXIS2_PLACEMENT_3D('',#15809,#15810,#15811);+#15809 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3));+#15810 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#15811 = DIRECTION('',(0.,0.,-1.));+#15812 = DEFINITIONAL_REPRESENTATION('',(#15813),#15817);+#15813 = LINE('',#15814,#15815);+#15814 = CARTESIAN_POINT('',(0.,-0.41));+#15815 = VECTOR('',#15816,1.);+#15816 = DIRECTION('',(1.,0.));+#15817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15818 = ORIENTED_EDGE('',*,*,#15819,.T.);+#15819 = EDGE_CURVE('',#15787,#15820,#15822,.T.);+#15820 = VERTEX_POINT('',#15821);+#15821 = CARTESIAN_POINT('',(2.545442325904,1.7,0.7770944533));+#15822 = SURFACE_CURVE('',#15823,(#15827,#15834),.PCURVE_S1.);+#15823 = LINE('',#15824,#15825);+#15824 = CARTESIAN_POINT('',(2.6264581915,1.7,0.282635182233));+#15825 = VECTOR('',#15826,1.);+#15826 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#15827 = PCURVE('',#1297,#15828);+#15828 = DEFINITIONAL_REPRESENTATION('',(#15829),#15833);+#15829 = LINE('',#15830,#15831);+#15830 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#15831 = VECTOR('',#15832,1.);+#15832 = DIRECTION('',(0.986841372087,0.161691392282));+#15833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15834 = PCURVE('',#15835,#15840);+#15835 = PLANE('',#15836);+#15836 = AXIS2_PLACEMENT_3D('',#15837,#15838,#15839);+#15837 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233));+#15838 = DIRECTION('',(-0.986841372087,-1.095614012943E-16,+ -0.161691392282));+#15839 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#15840 = DEFINITIONAL_REPRESENTATION('',(#15841),#15845);+#15841 = LINE('',#15842,#15843);+#15842 = CARTESIAN_POINT('',(7.360053770421E-18,-0.41));+#15843 = VECTOR('',#15844,1.);+#15844 = DIRECTION('',(1.,1.454264753163E-33));+#15845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15846 = ORIENTED_EDGE('',*,*,#15847,.T.);+#15847 = EDGE_CURVE('',#15820,#1254,#15848,.T.);+#15848 = SURFACE_CURVE('',#15849,(#15854,#15861),.PCURVE_S1.);+#15849 = CIRCLE('',#15850,0.3);+#15850 = AXIS2_PLACEMENT_3D('',#15851,#15852,#15853);+#15851 = CARTESIAN_POINT('',(2.25,1.7,0.725));+#15852 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15853 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#15854 = PCURVE('',#1297,#15855);+#15855 = DEFINITIONAL_REPRESENTATION('',(#15856),#15860);+#15856 = CIRCLE('',#15857,0.3);+#15857 = AXIS2_PLACEMENT_2D('',#15858,#15859);+#15858 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#15859 = DIRECTION('',(0.173648177667,-0.984807753012));+#15860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15861 = PCURVE('',#1269,#15862);+#15862 = DEFINITIONAL_REPRESENTATION('',(#15863),#15867);+#15863 = LINE('',#15864,#15865);+#15864 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#15865 = VECTOR('',#15866,1.);+#15866 = DIRECTION('',(-1.,0.));+#15867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15868 = ORIENTED_EDGE('',*,*,#1281,.T.);+#15869 = ADVANCED_FACE('',(#15870),#15835,.F.);+#15870 = FACE_BOUND('',#15871,.F.);+#15871 = EDGE_LOOP('',(#15872,#15895,#15896,#15919));+#15872 = ORIENTED_EDGE('',*,*,#15873,.T.);+#15873 = EDGE_CURVE('',#15874,#15787,#15876,.T.);+#15874 = VERTEX_POINT('',#15875);+#15875 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233));+#15876 = SURFACE_CURVE('',#15877,(#15881,#15888),.PCURVE_S1.);+#15877 = LINE('',#15878,#15879);+#15878 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233));+#15879 = VECTOR('',#15880,1.);+#15880 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15881 = PCURVE('',#15835,#15882);+#15882 = DEFINITIONAL_REPRESENTATION('',(#15883),#15887);+#15883 = LINE('',#15884,#15885);+#15884 = CARTESIAN_POINT('',(0.,0.));+#15885 = VECTOR('',#15886,1.);+#15886 = DIRECTION('',(5.505756095676E-29,-1.));+#15887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15888 = PCURVE('',#15807,#15889);+#15889 = DEFINITIONAL_REPRESENTATION('',(#15890),#15894);+#15890 = LINE('',#15891,#15892);+#15891 = CARTESIAN_POINT('',(1.396263401592,0.));+#15892 = VECTOR('',#15893,1.);+#15893 = DIRECTION('',(1.624716621403E-15,-1.));+#15894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15895 = ORIENTED_EDGE('',*,*,#15819,.T.);+#15896 = ORIENTED_EDGE('',*,*,#15897,.F.);+#15897 = EDGE_CURVE('',#15898,#15820,#15900,.T.);+#15898 = VERTEX_POINT('',#15899);+#15899 = CARTESIAN_POINT('',(2.545442325904,2.11,0.7770944533));+#15900 = SURFACE_CURVE('',#15901,(#15905,#15912),.PCURVE_S1.);+#15901 = LINE('',#15902,#15903);+#15902 = CARTESIAN_POINT('',(2.545442325904,2.11,0.7770944533));+#15903 = VECTOR('',#15904,1.);+#15904 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15905 = PCURVE('',#15835,#15906);+#15906 = DEFINITIONAL_REPRESENTATION('',(#15907),#15911);+#15907 = LINE('',#15908,#15909);+#15908 = CARTESIAN_POINT('',(0.501052433606,8.994567934487E-18));+#15909 = VECTOR('',#15910,1.);+#15910 = DIRECTION('',(5.505756095676E-29,-1.));+#15911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15912 = PCURVE('',#1269,#15913);+#15913 = DEFINITIONAL_REPRESENTATION('',(#15914),#15918);+#15914 = LINE('',#15915,#15916);+#15915 = CARTESIAN_POINT('',(6.28318530718,0.));+#15916 = VECTOR('',#15917,1.);+#15917 = DIRECTION('',(0.,-1.));+#15918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15919 = ORIENTED_EDGE('',*,*,#15920,.F.);+#15920 = EDGE_CURVE('',#15874,#15898,#15921,.T.);+#15921 = SURFACE_CURVE('',#15922,(#15926,#15933),.PCURVE_S1.);+#15922 = LINE('',#15923,#15924);+#15923 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233));+#15924 = VECTOR('',#15925,1.);+#15925 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#15926 = PCURVE('',#15835,#15927);+#15927 = DEFINITIONAL_REPRESENTATION('',(#15928),#15932);+#15928 = LINE('',#15929,#15930);+#15929 = CARTESIAN_POINT('',(0.,0.));+#15930 = VECTOR('',#15931,1.);+#15931 = DIRECTION('',(1.,1.454264753163E-33));+#15932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15933 = PCURVE('',#1119,#15934);+#15934 = DEFINITIONAL_REPRESENTATION('',(#15935),#15939);+#15935 = LINE('',#15936,#15937);+#15936 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#15937 = VECTOR('',#15938,1.);+#15938 = DIRECTION('',(0.986841372087,0.161691392282));+#15939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15940 = ADVANCED_FACE('',(#15941),#15807,.F.);+#15941 = FACE_BOUND('',#15942,.F.);+#15942 = EDGE_LOOP('',(#15943,#15966,#15967,#15968));+#15943 = ORIENTED_EDGE('',*,*,#15944,.T.);+#15944 = EDGE_CURVE('',#15945,#15759,#15947,.T.);+#15945 = VERTEX_POINT('',#15946);+#15946 = CARTESIAN_POINT('',(2.724938966801,2.11,0.2));+#15947 = SURFACE_CURVE('',#15948,(#15952,#15959),.PCURVE_S1.);+#15948 = LINE('',#15949,#15950);+#15949 = CARTESIAN_POINT('',(2.724938966801,2.11,0.2));+#15950 = VECTOR('',#15951,1.);+#15951 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#15952 = PCURVE('',#15807,#15953);+#15953 = DEFINITIONAL_REPRESENTATION('',(#15954),#15958);+#15954 = LINE('',#15955,#15956);+#15955 = CARTESIAN_POINT('',(0.,0.));+#15956 = VECTOR('',#15957,1.);+#15957 = DIRECTION('',(0.,-1.));+#15958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15959 = PCURVE('',#15774,#15960);+#15960 = DEFINITIONAL_REPRESENTATION('',(#15961),#15965);+#15961 = LINE('',#15962,#15963);+#15962 = CARTESIAN_POINT('',(0.275061033199,3.053790922347E-17));+#15963 = VECTOR('',#15964,1.);+#15964 = DIRECTION('',(0.,-1.));+#15965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15966 = ORIENTED_EDGE('',*,*,#15786,.T.);+#15967 = ORIENTED_EDGE('',*,*,#15873,.F.);+#15968 = ORIENTED_EDGE('',*,*,#15969,.F.);+#15969 = EDGE_CURVE('',#15945,#15874,#15970,.T.);+#15970 = SURFACE_CURVE('',#15971,(#15976,#15983),.PCURVE_S1.);+#15971 = CIRCLE('',#15972,0.1);+#15972 = AXIS2_PLACEMENT_3D('',#15973,#15974,#15975);+#15973 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3));+#15974 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#15975 = DIRECTION('',(0.,0.,-1.));+#15976 = PCURVE('',#15807,#15977);+#15977 = DEFINITIONAL_REPRESENTATION('',(#15978),#15982);+#15978 = LINE('',#15979,#15980);+#15979 = CARTESIAN_POINT('',(0.,0.));+#15980 = VECTOR('',#15981,1.);+#15981 = DIRECTION('',(1.,0.));+#15982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15983 = PCURVE('',#1119,#15984);+#15984 = DEFINITIONAL_REPRESENTATION('',(#15985),#15993);+#15985 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15986,#15987,#15988,#15989+ ,#15990,#15991,#15992),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15986 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15987 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#15988 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#15989 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#15990 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#15991 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#15992 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15994 = ADVANCED_FACE('',(#15995),#15774,.F.);+#15995 = FACE_BOUND('',#15996,.F.);+#15996 = EDGE_LOOP('',(#15997,#16020,#16021,#16022));+#15997 = ORIENTED_EDGE('',*,*,#15998,.T.);+#15998 = EDGE_CURVE('',#15999,#15731,#16001,.T.);+#15999 = VERTEX_POINT('',#16000);+#16000 = CARTESIAN_POINT('',(3.,2.11,0.2));+#16001 = SURFACE_CURVE('',#16002,(#16006,#16013),.PCURVE_S1.);+#16002 = LINE('',#16003,#16004);+#16003 = CARTESIAN_POINT('',(3.,2.11,0.2));+#16004 = VECTOR('',#16005,1.);+#16005 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#16006 = PCURVE('',#15774,#16007);+#16007 = DEFINITIONAL_REPRESENTATION('',(#16008),#16012);+#16008 = LINE('',#16009,#16010);+#16009 = CARTESIAN_POINT('',(-0.,0.));+#16010 = VECTOR('',#16011,1.);+#16011 = DIRECTION('',(0.,-1.));+#16012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16013 = PCURVE('',#15746,#16014);+#16014 = DEFINITIONAL_REPRESENTATION('',(#16015),#16019);+#16015 = LINE('',#16016,#16017);+#16016 = CARTESIAN_POINT('',(0.2,0.));+#16017 = VECTOR('',#16018,1.);+#16018 = DIRECTION('',(0.,-1.));+#16019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16020 = ORIENTED_EDGE('',*,*,#15758,.T.);+#16021 = ORIENTED_EDGE('',*,*,#15944,.F.);+#16022 = ORIENTED_EDGE('',*,*,#16023,.F.);+#16023 = EDGE_CURVE('',#15999,#15945,#16024,.T.);+#16024 = SURFACE_CURVE('',#16025,(#16029,#16036),.PCURVE_S1.);+#16025 = LINE('',#16026,#16027);+#16026 = CARTESIAN_POINT('',(3.,2.11,0.2));+#16027 = VECTOR('',#16028,1.);+#16028 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#16029 = PCURVE('',#15774,#16030);+#16030 = DEFINITIONAL_REPRESENTATION('',(#16031),#16035);+#16031 = LINE('',#16032,#16033);+#16032 = CARTESIAN_POINT('',(-0.,0.));+#16033 = VECTOR('',#16034,1.);+#16034 = DIRECTION('',(1.,0.));+#16035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16036 = PCURVE('',#1119,#16037);+#16037 = DEFINITIONAL_REPRESENTATION('',(#16038),#16042);+#16038 = LINE('',#16039,#16040);+#16039 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#16040 = VECTOR('',#16041,1.);+#16041 = DIRECTION('',(0.,1.));+#16042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16043 = ADVANCED_FACE('',(#16044),#15746,.F.);+#16044 = FACE_BOUND('',#16045,.F.);+#16045 = EDGE_LOOP('',(#16046,#16069,#16070,#16071));+#16046 = ORIENTED_EDGE('',*,*,#16047,.T.);+#16047 = EDGE_CURVE('',#16048,#15703,#16050,.T.);+#16048 = VERTEX_POINT('',#16049);+#16049 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16));+#16050 = SURFACE_CURVE('',#16051,(#16055,#16062),.PCURVE_S1.);+#16051 = LINE('',#16052,#16053);+#16052 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16));+#16053 = VECTOR('',#16054,1.);+#16054 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#16055 = PCURVE('',#15746,#16056);+#16056 = DEFINITIONAL_REPRESENTATION('',(#16057),#16061);+#16057 = LINE('',#16058,#16059);+#16058 = CARTESIAN_POINT('',(0.,0.));+#16059 = VECTOR('',#16060,1.);+#16060 = DIRECTION('',(0.,-1.));+#16061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16062 = PCURVE('',#15718,#16063);+#16063 = DEFINITIONAL_REPRESENTATION('',(#16064),#16068);+#16064 = LINE('',#16065,#16066);+#16065 = CARTESIAN_POINT('',(0.275061033199,-3.053790922347E-17));+#16066 = VECTOR('',#16067,1.);+#16067 = DIRECTION('',(0.,-1.));+#16068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16069 = ORIENTED_EDGE('',*,*,#15730,.T.);+#16070 = ORIENTED_EDGE('',*,*,#15998,.F.);+#16071 = ORIENTED_EDGE('',*,*,#16072,.F.);+#16072 = EDGE_CURVE('',#16048,#15999,#16073,.T.);+#16073 = SURFACE_CURVE('',#16074,(#16078,#16085),.PCURVE_S1.);+#16074 = LINE('',#16075,#16076);+#16075 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16));+#16076 = VECTOR('',#16077,1.);+#16077 = DIRECTION('',(0.,0.,1.));+#16078 = PCURVE('',#15746,#16079);+#16079 = DEFINITIONAL_REPRESENTATION('',(#16080),#16084);+#16080 = LINE('',#16081,#16082);+#16081 = CARTESIAN_POINT('',(0.,0.));+#16082 = VECTOR('',#16083,1.);+#16083 = DIRECTION('',(1.,0.));+#16084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16085 = PCURVE('',#1119,#16086);+#16086 = DEFINITIONAL_REPRESENTATION('',(#16087),#16091);+#16087 = LINE('',#16088,#16089);+#16088 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#16089 = VECTOR('',#16090,1.);+#16090 = DIRECTION('',(1.,0.));+#16091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16092 = ADVANCED_FACE('',(#16093),#15718,.F.);+#16093 = FACE_BOUND('',#16094,.F.);+#16094 = EDGE_LOOP('',(#16095,#16118,#16119,#16120));+#16095 = ORIENTED_EDGE('',*,*,#16096,.T.);+#16096 = EDGE_CURVE('',#16097,#15674,#16099,.T.);+#16097 = VERTEX_POINT('',#16098);+#16098 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16));+#16099 = SURFACE_CURVE('',#16100,(#16104,#16111),.PCURVE_S1.);+#16100 = LINE('',#16101,#16102);+#16101 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16));+#16102 = VECTOR('',#16103,1.);+#16103 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#16104 = PCURVE('',#15718,#16105);+#16105 = DEFINITIONAL_REPRESENTATION('',(#16106),#16110);+#16106 = LINE('',#16107,#16108);+#16107 = CARTESIAN_POINT('',(0.,0.));+#16108 = VECTOR('',#16109,1.);+#16109 = DIRECTION('',(0.,-1.));+#16110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16111 = PCURVE('',#15690,#16112);+#16112 = DEFINITIONAL_REPRESENTATION('',(#16113),#16117);+#16113 = LINE('',#16114,#16115);+#16114 = CARTESIAN_POINT('',(4.886921905584,0.));+#16115 = VECTOR('',#16116,1.);+#16116 = DIRECTION('',(4.332577657074E-15,-1.));+#16117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16118 = ORIENTED_EDGE('',*,*,#15702,.T.);+#16119 = ORIENTED_EDGE('',*,*,#16047,.F.);+#16120 = ORIENTED_EDGE('',*,*,#16121,.F.);+#16121 = EDGE_CURVE('',#16097,#16048,#16122,.T.);+#16122 = SURFACE_CURVE('',#16123,(#16127,#16134),.PCURVE_S1.);+#16123 = LINE('',#16124,#16125);+#16124 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16));+#16125 = VECTOR('',#16126,1.);+#16126 = DIRECTION('',(1.,1.110223024625E-16,0.));+#16127 = PCURVE('',#15718,#16128);+#16128 = DEFINITIONAL_REPRESENTATION('',(#16129),#16133);+#16129 = LINE('',#16130,#16131);+#16130 = CARTESIAN_POINT('',(0.,0.));+#16131 = VECTOR('',#16132,1.);+#16132 = DIRECTION('',(1.,0.));+#16133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16134 = PCURVE('',#1119,#16135);+#16135 = DEFINITIONAL_REPRESENTATION('',(#16136),#16140);+#16136 = LINE('',#16137,#16138);+#16137 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#16138 = VECTOR('',#16139,1.);+#16139 = DIRECTION('',(0.,-1.));+#16140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16141 = ADVANCED_FACE('',(#16142),#15690,.T.);+#16142 = FACE_BOUND('',#16143,.T.);+#16143 = EDGE_LOOP('',(#16144,#16168,#16169,#16170));+#16144 = ORIENTED_EDGE('',*,*,#16145,.T.);+#16145 = EDGE_CURVE('',#16146,#16097,#16148,.T.);+#16146 = VERTEX_POINT('',#16147);+#16147 = CARTESIAN_POINT('',(2.429496640897,2.11,0.2479055467));+#16148 = SURFACE_CURVE('',#16149,(#16154,#16161),.PCURVE_S1.);+#16149 = CIRCLE('',#16150,0.3);+#16150 = AXIS2_PLACEMENT_3D('',#16151,#16152,#16153);+#16151 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3));+#16152 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#16153 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#16154 = PCURVE('',#15690,#16155);+#16155 = DEFINITIONAL_REPRESENTATION('',(#16156),#16160);+#16156 = LINE('',#16157,#16158);+#16157 = CARTESIAN_POINT('',(6.28318530718,0.));+#16158 = VECTOR('',#16159,1.);+#16159 = DIRECTION('',(-1.,0.));+#16160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16161 = PCURVE('',#1119,#16162);+#16162 = DEFINITIONAL_REPRESENTATION('',(#16163),#16167);+#16163 = CIRCLE('',#16164,0.3);+#16164 = AXIS2_PLACEMENT_2D('',#16165,#16166);+#16165 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#16166 = DIRECTION('',(-0.173648177667,0.984807753012));+#16167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16168 = ORIENTED_EDGE('',*,*,#16096,.T.);+#16169 = ORIENTED_EDGE('',*,*,#15673,.F.);+#16170 = ORIENTED_EDGE('',*,*,#16171,.F.);+#16171 = EDGE_CURVE('',#16146,#15646,#16172,.T.);+#16172 = SURFACE_CURVE('',#16173,(#16177,#16184),.PCURVE_S1.);+#16173 = LINE('',#16174,#16175);+#16174 = CARTESIAN_POINT('',(2.429496640897,2.11,0.2479055467));+#16175 = VECTOR('',#16176,1.);+#16176 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#16177 = PCURVE('',#15690,#16178);+#16178 = DEFINITIONAL_REPRESENTATION('',(#16179),#16183);+#16179 = LINE('',#16180,#16181);+#16180 = CARTESIAN_POINT('',(6.28318530718,0.));+#16181 = VECTOR('',#16182,1.);+#16182 = DIRECTION('',(0.,-1.));+#16183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16184 = PCURVE('',#15661,#16185);+#16185 = DEFINITIONAL_REPRESENTATION('',(#16186),#16190);+#16186 = LINE('',#16187,#16188);+#16187 = CARTESIAN_POINT('',(0.501052433606,-8.994567934487E-18));+#16188 = VECTOR('',#16189,1.);+#16189 = DIRECTION('',(-5.505756095676E-29,-1.));+#16190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16191 = ADVANCED_FACE('',(#16192),#15661,.F.);+#16192 = FACE_BOUND('',#16193,.F.);+#16193 = EDGE_LOOP('',(#16194,#16217,#16218,#16219));+#16194 = ORIENTED_EDGE('',*,*,#16195,.T.);+#16195 = EDGE_CURVE('',#16196,#15613,#16198,.T.);+#16196 = VERTEX_POINT('',#16197);+#16197 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767));+#16198 = SURFACE_CURVE('',#16199,(#16203,#16210),.PCURVE_S1.);+#16199 = LINE('',#16200,#16201);+#16200 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767));+#16201 = VECTOR('',#16202,1.);+#16202 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#16203 = PCURVE('',#15661,#16204);+#16204 = DEFINITIONAL_REPRESENTATION('',(#16205),#16209);+#16205 = LINE('',#16206,#16207);+#16206 = CARTESIAN_POINT('',(0.,0.));+#16207 = VECTOR('',#16208,1.);+#16208 = DIRECTION('',(-5.505756095676E-29,-1.));+#16209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16210 = PCURVE('',#15633,#16211);+#16211 = DEFINITIONAL_REPRESENTATION('',(#16212),#16216);+#16212 = LINE('',#16213,#16214);+#16213 = CARTESIAN_POINT('',(1.396263401592,0.));+#16214 = VECTOR('',#16215,1.);+#16215 = DIRECTION('',(-4.332577657074E-15,-1.));+#16216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16217 = ORIENTED_EDGE('',*,*,#15645,.T.);+#16218 = ORIENTED_EDGE('',*,*,#16171,.F.);+#16219 = ORIENTED_EDGE('',*,*,#16220,.F.);+#16220 = EDGE_CURVE('',#16196,#16146,#16221,.T.);+#16221 = SURFACE_CURVE('',#16222,(#16226,#16233),.PCURVE_S1.);+#16222 = LINE('',#16223,#16224);+#16223 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767));+#16224 = VECTOR('',#16225,1.);+#16225 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#16226 = PCURVE('',#15661,#16227);+#16227 = DEFINITIONAL_REPRESENTATION('',(#16228),#16232);+#16228 = LINE('',#16229,#16230);+#16229 = CARTESIAN_POINT('',(0.,0.));+#16230 = VECTOR('',#16231,1.);+#16231 = DIRECTION('',(1.,-1.454264753163E-33));+#16232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16233 = PCURVE('',#1119,#16234);+#16234 = DEFINITIONAL_REPRESENTATION('',(#16235),#16239);+#16235 = LINE('',#16236,#16237);+#16236 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#16237 = VECTOR('',#16238,1.);+#16238 = DIRECTION('',(-0.986841372087,-0.161691392282));+#16239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16240 = ADVANCED_FACE('',(#16241),#15633,.F.);+#16241 = FACE_BOUND('',#16242,.F.);+#16242 = EDGE_LOOP('',(#16243,#16266,#16267,#16268));+#16243 = ORIENTED_EDGE('',*,*,#16244,.T.);+#16244 = EDGE_CURVE('',#16245,#15590,#16247,.T.);+#16245 = VERTEX_POINT('',#16246);+#16246 = CARTESIAN_POINT('',(2.25,2.11,0.825));+#16247 = SURFACE_CURVE('',#16248,(#16252,#16259),.PCURVE_S1.);+#16248 = LINE('',#16249,#16250);+#16249 = CARTESIAN_POINT('',(2.25,2.11,0.825));+#16250 = VECTOR('',#16251,1.);+#16251 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#16252 = PCURVE('',#15633,#16253);+#16253 = DEFINITIONAL_REPRESENTATION('',(#16254),#16258);+#16254 = LINE('',#16255,#16256);+#16255 = CARTESIAN_POINT('',(0.,0.));+#16256 = VECTOR('',#16257,1.);+#16257 = DIRECTION('',(0.,-1.));+#16258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16259 = PCURVE('',#1014,#16260);+#16260 = DEFINITIONAL_REPRESENTATION('',(#16261),#16265);+#16261 = LINE('',#16262,#16263);+#16262 = CARTESIAN_POINT('',(0.45,-4.996003610812E-17));+#16263 = VECTOR('',#16264,1.);+#16264 = DIRECTION('',(0.,-1.));+#16265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16266 = ORIENTED_EDGE('',*,*,#15612,.T.);+#16267 = ORIENTED_EDGE('',*,*,#16195,.F.);+#16268 = ORIENTED_EDGE('',*,*,#16269,.F.);+#16269 = EDGE_CURVE('',#16245,#16196,#16270,.T.);+#16270 = SURFACE_CURVE('',#16271,(#16276,#16283),.PCURVE_S1.);+#16271 = CIRCLE('',#16272,0.1);+#16272 = AXIS2_PLACEMENT_3D('',#16273,#16274,#16275);+#16273 = CARTESIAN_POINT('',(2.25,2.11,0.725));+#16274 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#16275 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#16276 = PCURVE('',#15633,#16277);+#16277 = DEFINITIONAL_REPRESENTATION('',(#16278),#16282);+#16278 = LINE('',#16279,#16280);+#16279 = CARTESIAN_POINT('',(0.,0.));+#16280 = VECTOR('',#16281,1.);+#16281 = DIRECTION('',(1.,0.));+#16282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16283 = PCURVE('',#1119,#16284);+#16284 = DEFINITIONAL_REPRESENTATION('',(#16285),#16293);+#16285 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16286,#16287,#16288,#16289+ ,#16290,#16291,#16292),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16286 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#16287 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#16288 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#16289 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#16290 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#16291 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#16292 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#16293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16294 = ADVANCED_FACE('',(#16295),#1269,.T.);+#16295 = FACE_BOUND('',#16296,.T.);+#16296 = EDGE_LOOP('',(#16297,#16319,#16320,#16321));+#16297 = ORIENTED_EDGE('',*,*,#16298,.T.);+#16298 = EDGE_CURVE('',#15898,#1231,#16299,.T.);+#16299 = SURFACE_CURVE('',#16300,(#16305,#16312),.PCURVE_S1.);+#16300 = CIRCLE('',#16301,0.3);+#16301 = AXIS2_PLACEMENT_3D('',#16302,#16303,#16304);+#16302 = CARTESIAN_POINT('',(2.25,2.11,0.725));+#16303 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#16304 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#16305 = PCURVE('',#1269,#16306);+#16306 = DEFINITIONAL_REPRESENTATION('',(#16307),#16311);+#16307 = LINE('',#16308,#16309);+#16308 = CARTESIAN_POINT('',(6.28318530718,0.));+#16309 = VECTOR('',#16310,1.);+#16310 = DIRECTION('',(-1.,0.));+#16311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16312 = PCURVE('',#1119,#16313);+#16313 = DEFINITIONAL_REPRESENTATION('',(#16314),#16318);+#16314 = CIRCLE('',#16315,0.3);+#16315 = AXIS2_PLACEMENT_2D('',#16316,#16317);+#16316 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#16317 = DIRECTION('',(0.173648177667,-0.984807753012));+#16318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16319 = ORIENTED_EDGE('',*,*,#1253,.T.);+#16320 = ORIENTED_EDGE('',*,*,#15847,.F.);+#16321 = ORIENTED_EDGE('',*,*,#15897,.F.);+#16322 = ADVANCED_FACE('',(#16323),#1119,.F.);+#16323 = FACE_BOUND('',#16324,.F.);+#16324 = EDGE_LOOP('',(#16325,#16326,#16347,#16348,#16349,#16350,#16351,+ #16352,#16353,#16354,#16355,#16356));+#16325 = ORIENTED_EDGE('',*,*,#1103,.F.);+#16326 = ORIENTED_EDGE('',*,*,#16327,.T.);+#16327 = EDGE_CURVE('',#999,#16245,#16328,.T.);+#16328 = SURFACE_CURVE('',#16329,(#16333,#16340),.PCURVE_S1.);+#16329 = LINE('',#16330,#16331);+#16330 = CARTESIAN_POINT('',(1.8,2.11,0.825));+#16331 = VECTOR('',#16332,1.);+#16332 = DIRECTION('',(1.,1.110223024625E-16,0.));+#16333 = PCURVE('',#1119,#16334);+#16334 = DEFINITIONAL_REPRESENTATION('',(#16335),#16339);+#16335 = LINE('',#16336,#16337);+#16336 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#16337 = VECTOR('',#16338,1.);+#16338 = DIRECTION('',(0.,-1.));+#16339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16340 = PCURVE('',#1014,#16341);+#16341 = DEFINITIONAL_REPRESENTATION('',(#16342),#16346);+#16342 = LINE('',#16343,#16344);+#16343 = CARTESIAN_POINT('',(0.,0.));+#16344 = VECTOR('',#16345,1.);+#16345 = DIRECTION('',(1.,0.));+#16346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16347 = ORIENTED_EDGE('',*,*,#16269,.T.);+#16348 = ORIENTED_EDGE('',*,*,#16220,.T.);+#16349 = ORIENTED_EDGE('',*,*,#16145,.T.);+#16350 = ORIENTED_EDGE('',*,*,#16121,.T.);+#16351 = ORIENTED_EDGE('',*,*,#16072,.T.);+#16352 = ORIENTED_EDGE('',*,*,#16023,.T.);+#16353 = ORIENTED_EDGE('',*,*,#15969,.T.);+#16354 = ORIENTED_EDGE('',*,*,#15920,.T.);+#16355 = ORIENTED_EDGE('',*,*,#16298,.T.);+#16356 = ORIENTED_EDGE('',*,*,#1230,.T.);+#16357 = ADVANCED_FACE('',(#16358),#1091,.F.);+#16358 = FACE_BOUND('',#16359,.F.);+#16359 = EDGE_LOOP('',(#16360,#16381,#16382,#16383));+#16360 = ORIENTED_EDGE('',*,*,#16361,.T.);+#16361 = EDGE_CURVE('',#78,#1027,#16362,.T.);+#16362 = SURFACE_CURVE('',#16363,(#16367,#16374),.PCURVE_S1.);+#16363 = LINE('',#16364,#16365);+#16364 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#16365 = VECTOR('',#16366,1.);+#16366 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#16367 = PCURVE('',#1091,#16368);+#16368 = DEFINITIONAL_REPRESENTATION('',(#16369),#16373);+#16369 = LINE('',#16370,#16371);+#16370 = CARTESIAN_POINT('',(0.,-0.2));+#16371 = VECTOR('',#16372,1.);+#16372 = DIRECTION('',(1.,0.));+#16373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16374 = PCURVE('',#92,#16375);+#16375 = DEFINITIONAL_REPRESENTATION('',(#16376),#16380);+#16376 = LINE('',#16377,#16378);+#16377 = CARTESIAN_POINT('',(-7.846142148017E-17,1.));+#16378 = VECTOR('',#16379,1.);+#16379 = DIRECTION('',(1.,0.));+#16380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16381 = ORIENTED_EDGE('',*,*,#1077,.T.);+#16382 = ORIENTED_EDGE('',*,*,#1208,.F.);+#16383 = ORIENTED_EDGE('',*,*,#16384,.F.);+#16384 = EDGE_CURVE('',#78,#1186,#16385,.T.);+#16385 = SURFACE_CURVE('',#16386,(#16389,#16395),.PCURVE_S1.);+#16386 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16387,#16388),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16387 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#16388 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#16389 = PCURVE('',#1091,#16390);+#16390 = DEFINITIONAL_REPRESENTATION('',(#16391),#16394);+#16391 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16392,#16393),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16392 = CARTESIAN_POINT('',(0.,-0.2));+#16393 = CARTESIAN_POINT('',(0.,0.));+#16394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16395 = PCURVE('',#120,#16396);+#16396 = DEFINITIONAL_REPRESENTATION('',(#16397),#16400);+#16397 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16398,#16399),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16398 = CARTESIAN_POINT('',(3.55,-0.2));+#16399 = CARTESIAN_POINT('',(3.55,0.));+#16400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16401 = ADVANCED_FACE('',(#16402),#1014,.F.);+#16402 = FACE_BOUND('',#16403,.F.);+#16403 = EDGE_LOOP('',(#16404,#16405,#16406,#16407));+#16404 = ORIENTED_EDGE('',*,*,#16327,.F.);+#16405 = ORIENTED_EDGE('',*,*,#998,.T.);+#16406 = ORIENTED_EDGE('',*,*,#15589,.T.);+#16407 = ORIENTED_EDGE('',*,*,#16244,.F.);+#16408 = ADVANCED_FACE('',(#16409),#986,.F.);+#16409 = FACE_BOUND('',#16410,.F.);+#16410 = EDGE_LOOP('',(#16411,#16412,#16413,#16414));+#16411 = ORIENTED_EDGE('',*,*,#15568,.F.);+#16412 = ORIENTED_EDGE('',*,*,#970,.T.);+#16413 = ORIENTED_EDGE('',*,*,#15513,.T.);+#16414 = ORIENTED_EDGE('',*,*,#1309,.F.);+#16415 = ADVANCED_FACE('',(#16416),#958,.F.);+#16416 = FACE_BOUND('',#16417,.F.);+#16417 = EDGE_LOOP('',(#16418,#16419,#16420,#16421));+#16418 = ORIENTED_EDGE('',*,*,#15534,.F.);+#16419 = ORIENTED_EDGE('',*,*,#942,.T.);+#16420 = ORIENTED_EDGE('',*,*,#14776,.T.);+#16421 = ORIENTED_EDGE('',*,*,#15431,.F.);+#16422 = ADVANCED_FACE('',(#16423),#930,.F.);+#16423 = FACE_BOUND('',#16424,.F.);+#16424 = EDGE_LOOP('',(#16425,#16426,#16427,#16428));+#16425 = ORIENTED_EDGE('',*,*,#14755,.F.);+#16426 = ORIENTED_EDGE('',*,*,#914,.T.);+#16427 = ORIENTED_EDGE('',*,*,#14700,.T.);+#16428 = ORIENTED_EDGE('',*,*,#1416,.F.);+#16429 = ADVANCED_FACE('',(#16430),#902,.F.);+#16430 = FACE_BOUND('',#16431,.F.);+#16431 = EDGE_LOOP('',(#16432,#16433,#16434,#16435));+#16432 = ORIENTED_EDGE('',*,*,#14721,.F.);+#16433 = ORIENTED_EDGE('',*,*,#886,.T.);+#16434 = ORIENTED_EDGE('',*,*,#13963,.T.);+#16435 = ORIENTED_EDGE('',*,*,#14618,.F.);+#16436 = ADVANCED_FACE('',(#16437),#874,.F.);+#16437 = FACE_BOUND('',#16438,.F.);+#16438 = EDGE_LOOP('',(#16439,#16440,#16441,#16442));+#16439 = ORIENTED_EDGE('',*,*,#13942,.F.);+#16440 = ORIENTED_EDGE('',*,*,#858,.T.);+#16441 = ORIENTED_EDGE('',*,*,#13887,.T.);+#16442 = ORIENTED_EDGE('',*,*,#1523,.F.);+#16443 = ADVANCED_FACE('',(#16444),#846,.F.);+#16444 = FACE_BOUND('',#16445,.F.);+#16445 = EDGE_LOOP('',(#16446,#16447,#16448,#16449));+#16446 = ORIENTED_EDGE('',*,*,#13908,.F.);+#16447 = ORIENTED_EDGE('',*,*,#830,.T.);+#16448 = ORIENTED_EDGE('',*,*,#13150,.T.);+#16449 = ORIENTED_EDGE('',*,*,#13805,.F.);+#16450 = ADVANCED_FACE('',(#16451),#818,.F.);+#16451 = FACE_BOUND('',#16452,.F.);+#16452 = EDGE_LOOP('',(#16453,#16454,#16455,#16473));+#16453 = ORIENTED_EDGE('',*,*,#13129,.F.);+#16454 = ORIENTED_EDGE('',*,*,#802,.T.);+#16455 = ORIENTED_EDGE('',*,*,#16456,.T.);+#16456 = EDGE_CURVE('',#724,#1631,#16457,.T.);+#16457 = SURFACE_CURVE('',#16458,(#16461,#16467),.PCURVE_S1.);+#16458 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16459,#16460),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16459 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#16460 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#16461 = PCURVE('',#818,#16462);+#16462 = DEFINITIONAL_REPRESENTATION('',(#16463),#16466);+#16463 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16464,#16465),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16464 = CARTESIAN_POINT('',(4.55,-0.2));+#16465 = CARTESIAN_POINT('',(4.55,0.));+#16466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16467 = PCURVE('',#739,#16468);+#16468 = DEFINITIONAL_REPRESENTATION('',(#16469),#16472);+#16469 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16470,#16471),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16470 = CARTESIAN_POINT('',(0.,-0.2));+#16471 = CARTESIAN_POINT('',(0.,0.));+#16472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16473 = ORIENTED_EDGE('',*,*,#1630,.F.);+#16474 = ADVANCED_FACE('',(#16475),#739,.F.);+#16475 = FACE_BOUND('',#16476,.F.);+#16476 = EDGE_LOOP('',(#16477,#16478,#16496,#16497));+#16477 = ORIENTED_EDGE('',*,*,#723,.T.);+#16478 = ORIENTED_EDGE('',*,*,#16479,.T.);+#16479 = EDGE_CURVE('',#645,#1654,#16480,.T.);+#16480 = SURFACE_CURVE('',#16481,(#16484,#16490),.PCURVE_S1.);+#16481 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16482,#16483),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16482 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#16483 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#16484 = PCURVE('',#739,#16485);+#16485 = DEFINITIONAL_REPRESENTATION('',(#16486),#16489);+#16486 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16487,#16488),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16487 = CARTESIAN_POINT('',(0.247487373415,-0.2));+#16488 = CARTESIAN_POINT('',(0.247487373415,0.));+#16489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16490 = PCURVE('',#660,#16491);+#16491 = DEFINITIONAL_REPRESENTATION('',(#16492),#16495);+#16492 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16493,#16494),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16493 = CARTESIAN_POINT('',(0.,-0.2));+#16494 = CARTESIAN_POINT('',(0.,0.));+#16495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16496 = ORIENTED_EDGE('',*,*,#1653,.F.);+#16497 = ORIENTED_EDGE('',*,*,#16456,.F.);+#16498 = ADVANCED_FACE('',(#16499),#660,.F.);+#16499 = FACE_BOUND('',#16500,.F.);+#16500 = EDGE_LOOP('',(#16501,#16502,#16520,#16521));+#16501 = ORIENTED_EDGE('',*,*,#644,.T.);+#16502 = ORIENTED_EDGE('',*,*,#16503,.T.);+#16503 = EDGE_CURVE('',#566,#1677,#16504,.T.);+#16504 = SURFACE_CURVE('',#16505,(#16508,#16514),.PCURVE_S1.);+#16505 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16506,#16507),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16506 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#16507 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#16508 = PCURVE('',#660,#16509);+#16509 = DEFINITIONAL_REPRESENTATION('',(#16510),#16513);+#16510 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16511,#16512),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16511 = CARTESIAN_POINT('',(3.55,-0.2));+#16512 = CARTESIAN_POINT('',(3.55,0.));+#16513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16514 = PCURVE('',#581,#16515);+#16515 = DEFINITIONAL_REPRESENTATION('',(#16516),#16519);+#16516 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16517,#16518),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16517 = CARTESIAN_POINT('',(0.,-0.2));+#16518 = CARTESIAN_POINT('',(0.,0.));+#16519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16520 = ORIENTED_EDGE('',*,*,#1676,.F.);+#16521 = ORIENTED_EDGE('',*,*,#16479,.F.);+#16522 = ADVANCED_FACE('',(#16523),#581,.F.);+#16523 = FACE_BOUND('',#16524,.F.);+#16524 = EDGE_LOOP('',(#16525,#16526,#16544,#16545));+#16525 = ORIENTED_EDGE('',*,*,#565,.T.);+#16526 = ORIENTED_EDGE('',*,*,#16527,.T.);+#16527 = EDGE_CURVE('',#487,#1700,#16528,.T.);+#16528 = SURFACE_CURVE('',#16529,(#16532,#16538),.PCURVE_S1.);+#16529 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16530,#16531),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16530 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#16531 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#16532 = PCURVE('',#581,#16533);+#16533 = DEFINITIONAL_REPRESENTATION('',(#16534),#16537);+#16534 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16535,#16536),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16535 = CARTESIAN_POINT('',(0.247487373415,-0.2));+#16536 = CARTESIAN_POINT('',(0.247487373415,0.));+#16537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16538 = PCURVE('',#502,#16539);+#16539 = DEFINITIONAL_REPRESENTATION('',(#16540),#16543);+#16540 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16541,#16542),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16541 = CARTESIAN_POINT('',(0.,-0.2));+#16542 = CARTESIAN_POINT('',(0.,0.));+#16543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16544 = ORIENTED_EDGE('',*,*,#1699,.F.);+#16545 = ORIENTED_EDGE('',*,*,#16503,.F.);+#16546 = ADVANCED_FACE('',(#16547),#502,.F.);+#16547 = FACE_BOUND('',#16548,.F.);+#16548 = EDGE_LOOP('',(#16549,#16550,#16551,#16552));+#16549 = ORIENTED_EDGE('',*,*,#16527,.F.);+#16550 = ORIENTED_EDGE('',*,*,#486,.T.);+#16551 = ORIENTED_EDGE('',*,*,#13074,.T.);+#16552 = ORIENTED_EDGE('',*,*,#1722,.F.);+#16553 = ADVANCED_FACE('',(#16554),#474,.F.);+#16554 = FACE_BOUND('',#16555,.F.);+#16555 = EDGE_LOOP('',(#16556,#16557,#16558,#16559));+#16556 = ORIENTED_EDGE('',*,*,#13095,.F.);+#16557 = ORIENTED_EDGE('',*,*,#458,.T.);+#16558 = ORIENTED_EDGE('',*,*,#12337,.T.);+#16559 = ORIENTED_EDGE('',*,*,#12992,.F.);+#16560 = ADVANCED_FACE('',(#16561),#446,.F.);+#16561 = FACE_BOUND('',#16562,.F.);+#16562 = EDGE_LOOP('',(#16563,#16564,#16565,#16566));+#16563 = ORIENTED_EDGE('',*,*,#12316,.F.);+#16564 = ORIENTED_EDGE('',*,*,#430,.T.);+#16565 = ORIENTED_EDGE('',*,*,#12261,.T.);+#16566 = ORIENTED_EDGE('',*,*,#1829,.F.);+#16567 = ADVANCED_FACE('',(#16568),#418,.F.);+#16568 = FACE_BOUND('',#16569,.F.);+#16569 = EDGE_LOOP('',(#16570,#16571,#16572,#16573));+#16570 = ORIENTED_EDGE('',*,*,#12282,.F.);+#16571 = ORIENTED_EDGE('',*,*,#402,.T.);+#16572 = ORIENTED_EDGE('',*,*,#11524,.T.);+#16573 = ORIENTED_EDGE('',*,*,#12179,.F.);+#16574 = ADVANCED_FACE('',(#16575),#390,.F.);+#16575 = FACE_BOUND('',#16576,.F.);+#16576 = EDGE_LOOP('',(#16577,#16578,#16579,#16580));+#16577 = ORIENTED_EDGE('',*,*,#11503,.F.);+#16578 = ORIENTED_EDGE('',*,*,#374,.T.);+#16579 = ORIENTED_EDGE('',*,*,#11448,.T.);+#16580 = ORIENTED_EDGE('',*,*,#1936,.F.);+#16581 = ADVANCED_FACE('',(#16582),#362,.F.);+#16582 = FACE_BOUND('',#16583,.F.);+#16583 = EDGE_LOOP('',(#16584,#16585,#16586,#16587));+#16584 = ORIENTED_EDGE('',*,*,#11469,.F.);+#16585 = ORIENTED_EDGE('',*,*,#346,.T.);+#16586 = ORIENTED_EDGE('',*,*,#10711,.T.);+#16587 = ORIENTED_EDGE('',*,*,#11366,.F.);+#16588 = ADVANCED_FACE('',(#16589),#334,.F.);+#16589 = FACE_BOUND('',#16590,.F.);+#16590 = EDGE_LOOP('',(#16591,#16592,#16593,#16594));+#16591 = ORIENTED_EDGE('',*,*,#10690,.F.);+#16592 = ORIENTED_EDGE('',*,*,#318,.T.);+#16593 = ORIENTED_EDGE('',*,*,#10635,.T.);+#16594 = ORIENTED_EDGE('',*,*,#2043,.F.);+#16595 = ADVANCED_FACE('',(#16596),#306,.F.);+#16596 = FACE_BOUND('',#16597,.F.);+#16597 = EDGE_LOOP('',(#16598,#16599,#16600,#16601));+#16598 = ORIENTED_EDGE('',*,*,#10656,.F.);+#16599 = ORIENTED_EDGE('',*,*,#290,.T.);+#16600 = ORIENTED_EDGE('',*,*,#9898,.T.);+#16601 = ORIENTED_EDGE('',*,*,#10553,.F.);+#16602 = ADVANCED_FACE('',(#16603),#278,.F.);+#16603 = FACE_BOUND('',#16604,.F.);+#16604 = EDGE_LOOP('',(#16605,#16606,#16607,#16625));+#16605 = ORIENTED_EDGE('',*,*,#9877,.F.);+#16606 = ORIENTED_EDGE('',*,*,#262,.T.);+#16607 = ORIENTED_EDGE('',*,*,#16608,.T.);+#16608 = EDGE_CURVE('',#184,#1161,#16609,.T.);+#16609 = SURFACE_CURVE('',#16610,(#16613,#16619),.PCURVE_S1.);+#16610 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16611,#16612),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16611 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#16612 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#16613 = PCURVE('',#278,#16614);+#16614 = DEFINITIONAL_REPRESENTATION('',(#16615),#16618);+#16615 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16616,#16617),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16616 = CARTESIAN_POINT('',(4.55,-0.2));+#16617 = CARTESIAN_POINT('',(4.55,0.));+#16618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16619 = PCURVE('',#199,#16620);+#16620 = DEFINITIONAL_REPRESENTATION('',(#16621),#16624);+#16621 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16622,#16623),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16622 = CARTESIAN_POINT('',(0.,-0.2));+#16623 = CARTESIAN_POINT('',(0.,0.));+#16624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16625 = ORIENTED_EDGE('',*,*,#2150,.F.);+#16626 = ADVANCED_FACE('',(#16627),#199,.F.);+#16627 = FACE_BOUND('',#16628,.F.);+#16628 = EDGE_LOOP('',(#16629,#16630,#16648,#16649));+#16629 = ORIENTED_EDGE('',*,*,#183,.T.);+#16630 = ORIENTED_EDGE('',*,*,#16631,.T.);+#16631 = EDGE_CURVE('',#105,#1163,#16632,.T.);+#16632 = SURFACE_CURVE('',#16633,(#16636,#16642),.PCURVE_S1.);+#16633 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16634,#16635),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16634 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#16635 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#16636 = PCURVE('',#199,#16637);+#16637 = DEFINITIONAL_REPRESENTATION('',(#16638),#16641);+#16638 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16639,#16640),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16639 = CARTESIAN_POINT('',(0.247487373415,-0.2));+#16640 = CARTESIAN_POINT('',(0.247487373415,0.));+#16641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16642 = PCURVE('',#120,#16643);+#16643 = DEFINITIONAL_REPRESENTATION('',(#16644),#16647);+#16644 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16645,#16646),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16645 = CARTESIAN_POINT('',(0.,-0.2));+#16646 = CARTESIAN_POINT('',(0.,0.));+#16647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16648 = ORIENTED_EDGE('',*,*,#1160,.F.);+#16649 = ORIENTED_EDGE('',*,*,#16608,.F.);+#16650 = ADVANCED_FACE('',(#16651),#120,.F.);+#16651 = FACE_BOUND('',#16652,.F.);+#16652 = EDGE_LOOP('',(#16653,#16654,#16655,#16656));+#16653 = ORIENTED_EDGE('',*,*,#104,.T.);+#16654 = ORIENTED_EDGE('',*,*,#16384,.T.);+#16655 = ORIENTED_EDGE('',*,*,#1185,.F.);+#16656 = ORIENTED_EDGE('',*,*,#16631,.F.);+#16657 = ADVANCED_FACE('',(#16658),#92,.F.);+#16658 = FACE_BOUND('',#16659,.F.);+#16659 = EDGE_LOOP('',(#16660,#16680,#16681,#16682));+#16660 = ORIENTED_EDGE('',*,*,#16661,.T.);+#16661 = EDGE_CURVE('',#46,#780,#16662,.T.);+#16662 = SURFACE_CURVE('',#16663,(#16667,#16673),.PCURVE_S1.);+#16663 = LINE('',#16664,#16665);+#16664 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#16665 = VECTOR('',#16666,1.);+#16666 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#16667 = PCURVE('',#92,#16668);+#16668 = DEFINITIONAL_REPRESENTATION('',(#16669),#16672);+#16669 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16670,#16671),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#16670 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#16671 = CARTESIAN_POINT('',(0.247487373415,1.101184707449E-18));+#16672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16673 = PCURVE('',#65,#16674);+#16674 = DEFINITIONAL_REPRESENTATION('',(#16675),#16679);+#16675 = LINE('',#16676,#16677);+#16676 = CARTESIAN_POINT('',(2.035384092796,2.767239296298));+#16677 = VECTOR('',#16678,1.);+#16678 = DIRECTION('',(0.98858755164,0.150647445192));+#16679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16680 = ORIENTED_EDGE('',*,*,#1054,.T.);+#16681 = ORIENTED_EDGE('',*,*,#16361,.F.);+#16682 = ORIENTED_EDGE('',*,*,#77,.F.);+#16683 = ADVANCED_FACE('',(#16684),#65,.F.);+#16684 = FACE_BOUND('',#16685,.T.);+#16685 = EDGE_LOOP('',(#16686,#16687,#16688,#16689,#16690,#16691,#16692,+ #16693));+#16686 = ORIENTED_EDGE('',*,*,#43,.T.);+#16687 = ORIENTED_EDGE('',*,*,#16661,.T.);+#16688 = ORIENTED_EDGE('',*,*,#779,.T.);+#16689 = ORIENTED_EDGE('',*,*,#700,.T.);+#16690 = ORIENTED_EDGE('',*,*,#621,.T.);+#16691 = ORIENTED_EDGE('',*,*,#542,.T.);+#16692 = ORIENTED_EDGE('',*,*,#239,.T.);+#16693 = ORIENTED_EDGE('',*,*,#160,.T.);+#16694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#16698)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#16695,#16696,#16697)) +REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#16695 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#16696 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#16697 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#16698 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-07),#16695,+ 'distance_accuracy_value','confusion accuracy');+#16699 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#16700,#16702);+#16700 = ( REPRESENTATION_RELATIONSHIP('','',#36,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#16701) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#16701 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15);+#16702 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+ #16703);+#16703 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('12730','body','',#5,#31,$);+#16704 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#33));+#16705 = SHAPE_DEFINITION_REPRESENTATION(#16706,#16712);+#16706 = PRODUCT_DEFINITION_SHAPE('','',#16707);+#16707 = PRODUCT_DEFINITION('design','',#16708,#16711);+#16708 = PRODUCT_DEFINITION_FORMATION('','',#16709);+#16709 = PRODUCT('laser_etch','laser_etch','',(#16710));+#16710 = PRODUCT_CONTEXT('',#2,'mechanical');+#16711 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#16712 = SHAPE_REPRESENTATION('',(#11,#16713,#17667,#18153,#19919,#21685+ ),#23451);+#16713 = MANIFOLD_SOLID_BREP('',#16714);+#16714 = CLOSED_SHELL('',(#16715,#16835,#16911,#16987,#17063,#17139,+ #17215,#17291,#17367,#17443,#17519,#17590,#17637,#17652));+#16715 = ADVANCED_FACE('',(#16716),#16730,.F.);+#16716 = FACE_BOUND('',#16717,.F.);+#16717 = EDGE_LOOP('',(#16718,#16753,#16781,#16809));+#16718 = ORIENTED_EDGE('',*,*,#16719,.T.);+#16719 = EDGE_CURVE('',#16720,#16722,#16724,.T.);+#16720 = VERTEX_POINT('',#16721);+#16721 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,+ 1.7450001));+#16722 = VERTEX_POINT('',#16723);+#16723 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,+ 1.7050001));+#16724 = SURFACE_CURVE('',#16725,(#16729,#16741),.PCURVE_S1.);+#16725 = LINE('',#16726,#16727);+#16726 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,+ 1.7450001));+#16727 = VECTOR('',#16728,1.);+#16728 = DIRECTION('',(-0.,-0.,-1.));+#16729 = PCURVE('',#16730,#16735);+#16730 = PLANE('',#16731);+#16731 = AXIS2_PLACEMENT_3D('',#16732,#16733,#16734);+#16732 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,+ 1.7450001));+#16733 = DIRECTION('',(0.851658316705,0.524097425664,0.));+#16734 = DIRECTION('',(-0.524097425664,0.851658316705,0.));+#16735 = DEFINITIONAL_REPRESENTATION('',(#16736),#16740);+#16736 = LINE('',#16737,#16738);+#16737 = CARTESIAN_POINT('',(0.,0.));+#16738 = VECTOR('',#16739,1.);+#16739 = DIRECTION('',(0.,-1.));+#16740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16741 = PCURVE('',#16742,#16747);+#16742 = PLANE('',#16743);+#16743 = AXIS2_PLACEMENT_3D('',#16744,#16745,#16746);+#16744 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.7450001)+ );+#16745 = DIRECTION('',(0.845285696497,-0.534314599555,0.));+#16746 = DIRECTION('',(0.534314599555,0.845285696497,0.));+#16747 = DEFINITIONAL_REPRESENTATION('',(#16748),#16752);+#16748 = LINE('',#16749,#16750);+#16749 = CARTESIAN_POINT('',(0.294896333013,0.));+#16750 = VECTOR('',#16751,1.);+#16751 = DIRECTION('',(0.,-1.));+#16752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16753 = ORIENTED_EDGE('',*,*,#16754,.T.);+#16754 = EDGE_CURVE('',#16722,#16755,#16757,.T.);+#16755 = VERTEX_POINT('',#16756);+#16756 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.7050001));+#16757 = SURFACE_CURVE('',#16758,(#16762,#16769),.PCURVE_S1.);+#16758 = LINE('',#16759,#16760);+#16759 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,+ 1.7050001));+#16760 = VECTOR('',#16761,1.);+#16761 = DIRECTION('',(-0.524097425664,0.851658316705,0.));+#16762 = PCURVE('',#16730,#16763);+#16763 = DEFINITIONAL_REPRESENTATION('',(#16764),#16768);+#16764 = LINE('',#16765,#16766);+#16765 = CARTESIAN_POINT('',(0.,-4.E-02));+#16766 = VECTOR('',#16767,1.);+#16767 = DIRECTION('',(1.,0.));+#16768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16769 = PCURVE('',#16770,#16775);+#16770 = PLANE('',#16771);+#16771 = AXIS2_PLACEMENT_3D('',#16772,#16773,#16774);+#16772 = CARTESIAN_POINT('',(-0.971403120159,-0.223430596007,1.7050001)+ );+#16773 = DIRECTION('',(0.,0.,1.));+#16774 = DIRECTION('',(1.,0.,0.));+#16775 = DEFINITIONAL_REPRESENTATION('',(#16776),#16780);+#16776 = LINE('',#16777,#16778);+#16777 = CARTESIAN_POINT('',(0.163239843063,0.249271652245));+#16778 = VECTOR('',#16779,1.);+#16779 = DIRECTION('',(-0.524097425664,0.851658316705));+#16780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16781 = ORIENTED_EDGE('',*,*,#16782,.F.);+#16782 = EDGE_CURVE('',#16783,#16755,#16785,.T.);+#16783 = VERTEX_POINT('',#16784);+#16784 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.7450001));+#16785 = SURFACE_CURVE('',#16786,(#16790,#16797),.PCURVE_S1.);+#16786 = LINE('',#16787,#16788);+#16787 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.7450001));+#16788 = VECTOR('',#16789,1.);+#16789 = DIRECTION('',(-0.,-0.,-1.));+#16790 = PCURVE('',#16730,#16791);+#16791 = DEFINITIONAL_REPRESENTATION('',(#16792),#16796);+#16792 = LINE('',#16793,#16794);+#16793 = CARTESIAN_POINT('',(0.259757519938,0.));+#16794 = VECTOR('',#16795,1.);+#16795 = DIRECTION('',(0.,-1.));+#16796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16797 = PCURVE('',#16798,#16803);+#16798 = PLANE('',#16799);+#16799 = AXIS2_PLACEMENT_3D('',#16800,#16801,#16802);+#16800 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.7450001));+#16801 = DIRECTION('',(0.,-1.,0.));+#16802 = DIRECTION('',(1.,0.,0.));+#16803 = DEFINITIONAL_REPRESENTATION('',(#16804),#16808);+#16804 = LINE('',#16805,#16806);+#16805 = CARTESIAN_POINT('',(0.,0.));+#16806 = VECTOR('',#16807,1.);+#16807 = DIRECTION('',(0.,-1.));+#16808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16809 = ORIENTED_EDGE('',*,*,#16810,.F.);+#16810 = EDGE_CURVE('',#16720,#16783,#16811,.T.);+#16811 = SURFACE_CURVE('',#16812,(#16816,#16823),.PCURVE_S1.);+#16812 = LINE('',#16813,#16814);+#16813 = CARTESIAN_POINT('',(-0.808163277095,2.584105623779E-02,+ 1.7450001));+#16814 = VECTOR('',#16815,1.);+#16815 = DIRECTION('',(-0.524097425664,0.851658316705,0.));+#16816 = PCURVE('',#16730,#16817);+#16817 = DEFINITIONAL_REPRESENTATION('',(#16818),#16822);+#16818 = LINE('',#16819,#16820);+#16819 = CARTESIAN_POINT('',(0.,0.));+#16820 = VECTOR('',#16821,1.);+#16821 = DIRECTION('',(1.,0.));+#16822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16823 = PCURVE('',#16824,#16829);+#16824 = PLANE('',#16825);+#16825 = AXIS2_PLACEMENT_3D('',#16826,#16827,#16828);+#16826 = CARTESIAN_POINT('',(-0.971403120159,-0.223430596007,1.7450001)+ );+#16827 = DIRECTION('',(0.,0.,1.));+#16828 = DIRECTION('',(1.,0.,0.));+#16829 = DEFINITIONAL_REPRESENTATION('',(#16830),#16834);+#16830 = LINE('',#16831,#16832);+#16831 = CARTESIAN_POINT('',(0.163239843063,0.249271652245));+#16832 = VECTOR('',#16833,1.);+#16833 = DIRECTION('',(-0.524097425664,0.851658316705));+#16834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16835 = ADVANCED_FACE('',(#16836),#16798,.F.);+#16836 = FACE_BOUND('',#16837,.F.);+#16837 = EDGE_LOOP('',(#16838,#16839,#16862,#16890));+#16838 = ORIENTED_EDGE('',*,*,#16782,.T.);+#16839 = ORIENTED_EDGE('',*,*,#16840,.T.);+#16840 = EDGE_CURVE('',#16755,#16841,#16843,.T.);+#16841 = VERTEX_POINT('',#16842);+#16842 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.7050001));+#16843 = SURFACE_CURVE('',#16844,(#16848,#16855),.PCURVE_S1.);+#16844 = LINE('',#16845,#16846);+#16845 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.7050001));+#16846 = VECTOR('',#16847,1.);+#16847 = DIRECTION('',(1.,0.,0.));+#16848 = PCURVE('',#16798,#16849);+#16849 = DEFINITIONAL_REPRESENTATION('',(#16850),#16854);+#16850 = LINE('',#16851,#16852);+#16851 = CARTESIAN_POINT('',(0.,-4.E-02));+#16852 = VECTOR('',#16853,1.);+#16853 = DIRECTION('',(1.,0.));+#16854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16855 = PCURVE('',#16770,#16856);+#16856 = DEFINITIONAL_REPRESENTATION('',(#16857),#16861);+#16857 = LINE('',#16858,#16859);+#16858 = CARTESIAN_POINT('',(2.710159556647E-02,0.470496304427));+#16859 = VECTOR('',#16860,1.);+#16860 = DIRECTION('',(1.,0.));+#16861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16862 = ORIENTED_EDGE('',*,*,#16863,.F.);+#16863 = EDGE_CURVE('',#16864,#16841,#16866,.T.);+#16864 = VERTEX_POINT('',#16865);+#16865 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.7450001));+#16866 = SURFACE_CURVE('',#16867,(#16871,#16878),.PCURVE_S1.);+#16867 = LINE('',#16868,#16869);+#16868 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.7450001));+#16869 = VECTOR('',#16870,1.);+#16870 = DIRECTION('',(-0.,-0.,-1.));+#16871 = PCURVE('',#16798,#16872);+#16872 = DEFINITIONAL_REPRESENTATION('',(#16873),#16877);+#16873 = LINE('',#16874,#16875);+#16874 = CARTESIAN_POINT('',(6.83842585805E-02,0.));+#16875 = VECTOR('',#16876,1.);+#16876 = DIRECTION('',(0.,-1.));+#16877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16878 = PCURVE('',#16879,#16884);+#16879 = PLANE('',#16880);+#16880 = AXIS2_PLACEMENT_3D('',#16881,#16882,#16883);+#16881 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.7450001));+#16882 = DIRECTION('',(-0.864057089359,-0.503393828259,0.));+#16883 = DIRECTION('',(0.503393828259,-0.864057089359,0.));+#16884 = DEFINITIONAL_REPRESENTATION('',(#16885),#16889);+#16885 = LINE('',#16886,#16887);+#16886 = CARTESIAN_POINT('',(0.,0.));+#16887 = VECTOR('',#16888,1.);+#16888 = DIRECTION('',(0.,-1.));+#16889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16890 = ORIENTED_EDGE('',*,*,#16891,.F.);+#16891 = EDGE_CURVE('',#16783,#16864,#16892,.T.);+#16892 = SURFACE_CURVE('',#16893,(#16897,#16904),.PCURVE_S1.);+#16893 = LINE('',#16894,#16895);+#16894 = CARTESIAN_POINT('',(-0.944301524592,0.24706570842,1.7450001));+#16895 = VECTOR('',#16896,1.);+#16896 = DIRECTION('',(1.,0.,0.));+#16897 = PCURVE('',#16798,#16898);+#16898 = DEFINITIONAL_REPRESENTATION('',(#16899),#16903);+#16899 = LINE('',#16900,#16901);+#16900 = CARTESIAN_POINT('',(0.,0.));+#16901 = VECTOR('',#16902,1.);+#16902 = DIRECTION('',(1.,0.));+#16903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16904 = PCURVE('',#16824,#16905);+#16905 = DEFINITIONAL_REPRESENTATION('',(#16906),#16910);+#16906 = LINE('',#16907,#16908);+#16907 = CARTESIAN_POINT('',(2.710159556647E-02,0.470496304427));+#16908 = VECTOR('',#16909,1.);+#16909 = DIRECTION('',(1.,0.));+#16910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16911 = ADVANCED_FACE('',(#16912),#16879,.F.);+#16912 = FACE_BOUND('',#16913,.F.);+#16913 = EDGE_LOOP('',(#16914,#16915,#16938,#16966));+#16914 = ORIENTED_EDGE('',*,*,#16863,.T.);+#16915 = ORIENTED_EDGE('',*,*,#16916,.T.);+#16916 = EDGE_CURVE('',#16841,#16917,#16919,.T.);+#16917 = VERTEX_POINT('',#16918);+#16918 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.7050001+ ));+#16919 = SURFACE_CURVE('',#16920,(#16924,#16931),.PCURVE_S1.);+#16920 = LINE('',#16921,#16922);+#16921 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.7050001));+#16922 = VECTOR('',#16923,1.);+#16923 = DIRECTION('',(0.503393828259,-0.864057089359,0.));+#16924 = PCURVE('',#16879,#16925);+#16925 = DEFINITIONAL_REPRESENTATION('',(#16926),#16930);+#16926 = LINE('',#16927,#16928);+#16927 = CARTESIAN_POINT('',(0.,-4.E-02));+#16928 = VECTOR('',#16929,1.);+#16929 = DIRECTION('',(1.,0.));+#16930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16931 = PCURVE('',#16770,#16932);+#16932 = DEFINITIONAL_REPRESENTATION('',(#16933),#16937);+#16933 = LINE('',#16934,#16935);+#16934 = CARTESIAN_POINT('',(9.548585414697E-02,0.470496304427));+#16935 = VECTOR('',#16936,1.);+#16936 = DIRECTION('',(0.503393828259,-0.864057089359));+#16937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16938 = ORIENTED_EDGE('',*,*,#16939,.F.);+#16939 = EDGE_CURVE('',#16940,#16917,#16942,.T.);+#16940 = VERTEX_POINT('',#16941);+#16941 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.7450001+ ));+#16942 = SURFACE_CURVE('',#16943,(#16947,#16954),.PCURVE_S1.);+#16943 = LINE('',#16944,#16945);+#16944 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.7450001+ ));+#16945 = VECTOR('',#16946,1.);+#16946 = DIRECTION('',(-0.,-0.,-1.));+#16947 = PCURVE('',#16879,#16948);+#16948 = DEFINITIONAL_REPRESENTATION('',(#16949),#16953);+#16949 = LINE('',#16950,#16951);+#16950 = CARTESIAN_POINT('',(0.20533470843,0.));+#16951 = VECTOR('',#16952,1.);+#16952 = DIRECTION('',(0.,-1.));+#16953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16954 = PCURVE('',#16955,#16960);+#16955 = PLANE('',#16956);+#16956 = AXIS2_PLACEMENT_3D('',#16957,#16958,#16959);+#16957 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.7450001+ ));+#16958 = DIRECTION('',(0.86004329236,-0.510221065095,0.));+#16959 = DIRECTION('',(0.510221065095,0.86004329236,0.));+#16960 = DEFINITIONAL_REPRESENTATION('',(#16961),#16965);+#16961 = LINE('',#16962,#16963);+#16962 = CARTESIAN_POINT('',(0.,0.));+#16963 = VECTOR('',#16964,1.);+#16964 = DIRECTION('',(0.,-1.));+#16965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16966 = ORIENTED_EDGE('',*,*,#16967,.F.);+#16967 = EDGE_CURVE('',#16864,#16940,#16968,.T.);+#16968 = SURFACE_CURVE('',#16969,(#16973,#16980),.PCURVE_S1.);+#16969 = LINE('',#16970,#16971);+#16970 = CARTESIAN_POINT('',(-0.875917266012,0.24706570842,1.7450001));+#16971 = VECTOR('',#16972,1.);+#16972 = DIRECTION('',(0.503393828259,-0.864057089359,0.));+#16973 = PCURVE('',#16879,#16974);+#16974 = DEFINITIONAL_REPRESENTATION('',(#16975),#16979);+#16975 = LINE('',#16976,#16977);+#16976 = CARTESIAN_POINT('',(0.,0.));+#16977 = VECTOR('',#16978,1.);+#16978 = DIRECTION('',(1.,0.));+#16979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16980 = PCURVE('',#16824,#16981);+#16981 = DEFINITIONAL_REPRESENTATION('',(#16982),#16986);+#16982 = LINE('',#16983,#16984);+#16983 = CARTESIAN_POINT('',(9.548585414697E-02,0.470496304427));+#16984 = VECTOR('',#16985,1.);+#16985 = DIRECTION('',(0.503393828259,-0.864057089359));+#16986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16987 = ADVANCED_FACE('',(#16988),#16955,.F.);+#16988 = FACE_BOUND('',#16989,.F.);+#16989 = EDGE_LOOP('',(#16990,#16991,#17014,#17042));+#16990 = ORIENTED_EDGE('',*,*,#16939,.T.);+#16991 = ORIENTED_EDGE('',*,*,#16992,.T.);+#16992 = EDGE_CURVE('',#16917,#16993,#16995,.T.);+#16993 = VERTEX_POINT('',#16994);+#16994 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.7050001));+#16995 = SURFACE_CURVE('',#16996,(#17000,#17007),.PCURVE_S1.);+#16996 = LINE('',#16997,#16998);+#16997 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.7050001+ ));+#16998 = VECTOR('',#16999,1.);+#16999 = DIRECTION('',(0.510221065095,0.86004329236,0.));+#17000 = PCURVE('',#16955,#17001);+#17001 = DEFINITIONAL_REPRESENTATION('',(#17002),#17006);+#17002 = LINE('',#17003,#17004);+#17003 = CARTESIAN_POINT('',(0.,-4.E-02));+#17004 = VECTOR('',#17005,1.);+#17005 = DIRECTION('',(1.,0.));+#17006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17007 = PCURVE('',#16770,#17008);+#17008 = DEFINITIONAL_REPRESENTATION('',(#17009),#17013);+#17009 = LINE('',#17010,#17011);+#17010 = CARTESIAN_POINT('',(0.198850079098,0.293075393916));+#17011 = VECTOR('',#17012,1.);+#17012 = DIRECTION('',(0.510221065095,0.86004329236));+#17013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17014 = ORIENTED_EDGE('',*,*,#17015,.F.);+#17015 = EDGE_CURVE('',#17016,#16993,#17018,.T.);+#17016 = VERTEX_POINT('',#17017);+#17017 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.7450001));+#17018 = SURFACE_CURVE('',#17019,(#17023,#17030),.PCURVE_S1.);+#17019 = LINE('',#17020,#17021);+#17020 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.7450001));+#17021 = VECTOR('',#17022,1.);+#17022 = DIRECTION('',(-0.,-0.,-1.));+#17023 = PCURVE('',#16955,#17024);+#17024 = DEFINITIONAL_REPRESENTATION('',(#17025),#17029);+#17025 = LINE('',#17026,#17027);+#17026 = CARTESIAN_POINT('',(0.206292999535,0.));+#17027 = VECTOR('',#17028,1.);+#17028 = DIRECTION('',(0.,-1.));+#17029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17030 = PCURVE('',#17031,#17036);+#17031 = PLANE('',#17032);+#17032 = AXIS2_PLACEMENT_3D('',#17033,#17034,#17035);+#17033 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.7450001));+#17034 = DIRECTION('',(0.,-1.,0.));+#17035 = DIRECTION('',(1.,0.,0.));+#17036 = DEFINITIONAL_REPRESENTATION('',(#17037),#17041);+#17037 = LINE('',#17038,#17039);+#17038 = CARTESIAN_POINT('',(0.,0.));+#17039 = VECTOR('',#17040,1.);+#17040 = DIRECTION('',(0.,-1.));+#17041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17042 = ORIENTED_EDGE('',*,*,#17043,.F.);+#17043 = EDGE_CURVE('',#16940,#17016,#17044,.T.);+#17044 = SURFACE_CURVE('',#17045,(#17049,#17056),.PCURVE_S1.);+#17045 = LINE('',#17046,#17047);+#17046 = CARTESIAN_POINT('',(-0.77255304106,6.964479790918E-02,1.7450001+ ));+#17047 = VECTOR('',#17048,1.);+#17048 = DIRECTION('',(0.510221065095,0.86004329236,0.));+#17049 = PCURVE('',#16955,#17050);+#17050 = DEFINITIONAL_REPRESENTATION('',(#17051),#17055);+#17051 = LINE('',#17052,#17053);+#17052 = CARTESIAN_POINT('',(0.,0.));+#17053 = VECTOR('',#17054,1.);+#17054 = DIRECTION('',(1.,0.));+#17055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17056 = PCURVE('',#16824,#17057);+#17057 = DEFINITIONAL_REPRESENTATION('',(#17058),#17062);+#17058 = LINE('',#17059,#17060);+#17059 = CARTESIAN_POINT('',(0.198850079098,0.293075393916));+#17060 = VECTOR('',#17061,1.);+#17061 = DIRECTION('',(0.510221065095,0.86004329236));+#17062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17063 = ADVANCED_FACE('',(#17064),#17031,.F.);+#17064 = FACE_BOUND('',#17065,.F.);+#17065 = EDGE_LOOP('',(#17066,#17067,#17090,#17118));+#17066 = ORIENTED_EDGE('',*,*,#17015,.T.);+#17067 = ORIENTED_EDGE('',*,*,#17068,.T.);+#17068 = EDGE_CURVE('',#16993,#17069,#17071,.T.);+#17069 = VERTEX_POINT('',#17070);+#17070 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.7050001));+#17071 = SURFACE_CURVE('',#17072,(#17076,#17083),.PCURVE_S1.);+#17072 = LINE('',#17073,#17074);+#17073 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.7050001));+#17074 = VECTOR('',#17075,1.);+#17075 = DIRECTION('',(1.,0.,0.));+#17076 = PCURVE('',#17031,#17077);+#17077 = DEFINITIONAL_REPRESENTATION('',(#17078),#17082);+#17078 = LINE('',#17079,#17080);+#17079 = CARTESIAN_POINT('',(0.,-4.E-02));+#17080 = VECTOR('',#17081,1.);+#17081 = DIRECTION('',(1.,0.));+#17082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17083 = PCURVE('',#16770,#17084);+#17084 = DEFINITIONAL_REPRESENTATION('',(#17085),#17089);+#17085 = LINE('',#17086,#17087);+#17086 = CARTESIAN_POINT('',(0.304105113042,0.470496304427));+#17087 = VECTOR('',#17088,1.);+#17088 = DIRECTION('',(1.,0.));+#17089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17090 = ORIENTED_EDGE('',*,*,#17091,.F.);+#17091 = EDGE_CURVE('',#17092,#17069,#17094,.T.);+#17092 = VERTEX_POINT('',#17093);+#17093 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.7450001));+#17094 = SURFACE_CURVE('',#17095,(#17099,#17106),.PCURVE_S1.);+#17095 = LINE('',#17096,#17097);+#17096 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.7450001));+#17097 = VECTOR('',#17098,1.);+#17098 = DIRECTION('',(-0.,-0.,-1.));+#17099 = PCURVE('',#17031,#17100);+#17100 = DEFINITIONAL_REPRESENTATION('',(#17101),#17105);+#17101 = LINE('',#17102,#17103);+#17102 = CARTESIAN_POINT('',(6.83842585805E-02,0.));+#17103 = VECTOR('',#17104,1.);+#17104 = DIRECTION('',(0.,-1.));+#17105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17106 = PCURVE('',#17107,#17112);+#17107 = PLANE('',#17108);+#17108 = AXIS2_PLACEMENT_3D('',#17109,#17110,#17111);+#17109 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.7450001));+#17110 = DIRECTION('',(-0.843513024338,0.537108720626,0.));+#17111 = DIRECTION('',(-0.537108720626,-0.843513024338,0.));+#17112 = DEFINITIONAL_REPRESENTATION('',(#17113),#17117);+#17113 = LINE('',#17114,#17115);+#17114 = CARTESIAN_POINT('',(0.,0.));+#17115 = VECTOR('',#17116,1.);+#17116 = DIRECTION('',(0.,-1.));+#17117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17118 = ORIENTED_EDGE('',*,*,#17119,.F.);+#17119 = EDGE_CURVE('',#17016,#17092,#17120,.T.);+#17120 = SURFACE_CURVE('',#17121,(#17125,#17132),.PCURVE_S1.);+#17121 = LINE('',#17122,#17123);+#17122 = CARTESIAN_POINT('',(-0.667298007116,0.24706570842,1.7450001));+#17123 = VECTOR('',#17124,1.);+#17124 = DIRECTION('',(1.,0.,0.));+#17125 = PCURVE('',#17031,#17126);+#17126 = DEFINITIONAL_REPRESENTATION('',(#17127),#17131);+#17127 = LINE('',#17128,#17129);+#17128 = CARTESIAN_POINT('',(0.,0.));+#17129 = VECTOR('',#17130,1.);+#17130 = DIRECTION('',(1.,0.));+#17131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17132 = PCURVE('',#16824,#17133);+#17133 = DEFINITIONAL_REPRESENTATION('',(#17134),#17138);+#17134 = LINE('',#17135,#17136);+#17135 = CARTESIAN_POINT('',(0.304105113042,0.470496304427));+#17136 = VECTOR('',#17137,1.);+#17137 = DIRECTION('',(1.,0.));+#17138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17139 = ADVANCED_FACE('',(#17140),#17107,.F.);+#17140 = FACE_BOUND('',#17141,.F.);+#17141 = EDGE_LOOP('',(#17142,#17143,#17166,#17194));+#17142 = ORIENTED_EDGE('',*,*,#17091,.T.);+#17143 = ORIENTED_EDGE('',*,*,#17144,.T.);+#17144 = EDGE_CURVE('',#17069,#17145,#17147,.T.);+#17145 = VERTEX_POINT('',#17146);+#17146 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,+ 1.7050001));+#17147 = SURFACE_CURVE('',#17148,(#17152,#17159),.PCURVE_S1.);+#17148 = LINE('',#17149,#17150);+#17149 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.7050001));+#17150 = VECTOR('',#17151,1.);+#17151 = DIRECTION('',(-0.537108720626,-0.843513024338,0.));+#17152 = PCURVE('',#17107,#17153);+#17153 = DEFINITIONAL_REPRESENTATION('',(#17154),#17158);+#17154 = LINE('',#17155,#17156);+#17155 = CARTESIAN_POINT('',(-0.,-4.E-02));+#17156 = VECTOR('',#17157,1.);+#17157 = DIRECTION('',(1.,0.));+#17158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17159 = PCURVE('',#16770,#17160);+#17160 = DEFINITIONAL_REPRESENTATION('',(#17161),#17165);+#17161 = LINE('',#17162,#17163);+#17162 = CARTESIAN_POINT('',(0.372489371623,0.470496304427));+#17163 = VECTOR('',#17164,1.);+#17164 = DIRECTION('',(-0.537108720626,-0.843513024338));+#17165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17166 = ORIENTED_EDGE('',*,*,#17167,.F.);+#17167 = EDGE_CURVE('',#17168,#17145,#17170,.T.);+#17168 = VERTEX_POINT('',#17169);+#17169 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,+ 1.7450001));+#17170 = SURFACE_CURVE('',#17171,(#17175,#17182),.PCURVE_S1.);+#17171 = LINE('',#17172,#17173);+#17172 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,+ 1.7450001));+#17173 = VECTOR('',#17174,1.);+#17174 = DIRECTION('',(-0.,-0.,-1.));+#17175 = PCURVE('',#17107,#17176);+#17176 = DEFINITIONAL_REPRESENTATION('',(#17177),#17181);+#17177 = LINE('',#17178,#17179);+#17178 = CARTESIAN_POINT('',(0.262265840359,0.));+#17179 = VECTOR('',#17180,1.);+#17180 = DIRECTION('',(0.,-1.));+#17181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17182 = PCURVE('',#17183,#17188);+#17183 = PLANE('',#17184);+#17184 = AXIS2_PLACEMENT_3D('',#17185,#17186,#17187);+#17185 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,+ 1.7450001));+#17186 = DIRECTION('',(-0.855386602024,-0.517990116776,0.));+#17187 = DIRECTION('',(0.517990116776,-0.855386602024,0.));+#17188 = DEFINITIONAL_REPRESENTATION('',(#17189),#17193);+#17189 = LINE('',#17190,#17191);+#17190 = CARTESIAN_POINT('',(0.,0.));+#17191 = VECTOR('',#17192,1.);+#17192 = DIRECTION('',(0.,-1.));+#17193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17194 = ORIENTED_EDGE('',*,*,#17195,.F.);+#17195 = EDGE_CURVE('',#17092,#17168,#17196,.T.);+#17196 = SURFACE_CURVE('',#17197,(#17201,#17208),.PCURVE_S1.);+#17197 = LINE('',#17198,#17199);+#17198 = CARTESIAN_POINT('',(-0.598913748536,0.24706570842,1.7450001));+#17199 = VECTOR('',#17200,1.);+#17200 = DIRECTION('',(-0.537108720626,-0.843513024338,0.));+#17201 = PCURVE('',#17107,#17202);+#17202 = DEFINITIONAL_REPRESENTATION('',(#17203),#17207);+#17203 = LINE('',#17204,#17205);+#17204 = CARTESIAN_POINT('',(0.,0.));+#17205 = VECTOR('',#17206,1.);+#17206 = DIRECTION('',(1.,0.));+#17207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17208 = PCURVE('',#16824,#17209);+#17209 = DEFINITIONAL_REPRESENTATION('',(#17210),#17214);+#17210 = LINE('',#17211,#17212);+#17211 = CARTESIAN_POINT('',(0.372489371623,0.470496304427));+#17212 = VECTOR('',#17213,1.);+#17213 = DIRECTION('',(-0.537108720626,-0.843513024338));+#17214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17215 = ADVANCED_FACE('',(#17216),#17183,.F.);+#17216 = FACE_BOUND('',#17217,.F.);+#17217 = EDGE_LOOP('',(#17218,#17219,#17242,#17270));+#17218 = ORIENTED_EDGE('',*,*,#17167,.T.);+#17219 = ORIENTED_EDGE('',*,*,#17220,.T.);+#17220 = EDGE_CURVE('',#17145,#17221,#17223,.T.);+#17221 = VERTEX_POINT('',#17222);+#17222 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.7050001)+ );+#17223 = SURFACE_CURVE('',#17224,(#17228,#17235),.PCURVE_S1.);+#17224 = LINE('',#17225,#17226);+#17225 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,+ 1.7050001));+#17226 = VECTOR('',#17227,1.);+#17227 = DIRECTION('',(0.517990116776,-0.855386602024,0.));+#17228 = PCURVE('',#17183,#17229);+#17229 = DEFINITIONAL_REPRESENTATION('',(#17230),#17234);+#17230 = LINE('',#17231,#17232);+#17231 = CARTESIAN_POINT('',(0.,-4.E-02));+#17232 = VECTOR('',#17233,1.);+#17233 = DIRECTION('',(1.,0.));+#17234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17235 = PCURVE('',#16770,#17236);+#17236 = DEFINITIONAL_REPRESENTATION('',(#17237),#17241);+#17237 = LINE('',#17238,#17239);+#17238 = CARTESIAN_POINT('',(0.231624101644,0.249271652245));+#17239 = VECTOR('',#17240,1.);+#17240 = DIRECTION('',(0.517990116776,-0.855386602024));+#17241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17242 = ORIENTED_EDGE('',*,*,#17243,.F.);+#17243 = EDGE_CURVE('',#17244,#17221,#17246,.T.);+#17244 = VERTEX_POINT('',#17245);+#17245 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.7450001)+ );+#17246 = SURFACE_CURVE('',#17247,(#17251,#17258),.PCURVE_S1.);+#17247 = LINE('',#17248,#17249);+#17248 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.7450001)+ );+#17249 = VECTOR('',#17250,1.);+#17250 = DIRECTION('',(-0.,-0.,-1.));+#17251 = PCURVE('',#17183,#17252);+#17252 = DEFINITIONAL_REPRESENTATION('',(#17253),#17257);+#17253 = LINE('',#17254,#17255);+#17254 = CARTESIAN_POINT('',(0.291414024554,0.));+#17255 = VECTOR('',#17256,1.);+#17256 = DIRECTION('',(0.,-1.));+#17257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17258 = PCURVE('',#17259,#17264);+#17259 = PLANE('',#17260);+#17260 = AXIS2_PLACEMENT_3D('',#17261,#17262,#17263);+#17261 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.7450001)+ );+#17262 = DIRECTION('',(0.,1.,0.));+#17263 = DIRECTION('',(-1.,0.,0.));+#17264 = DEFINITIONAL_REPRESENTATION('',(#17265),#17269);+#17265 = LINE('',#17266,#17267);+#17266 = CARTESIAN_POINT('',(0.,0.));+#17267 = VECTOR('',#17268,1.);+#17268 = DIRECTION('',(0.,-1.));+#17269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17270 = ORIENTED_EDGE('',*,*,#17271,.F.);+#17271 = EDGE_CURVE('',#17168,#17244,#17272,.T.);+#17272 = SURFACE_CURVE('',#17273,(#17277,#17284),.PCURVE_S1.);+#17273 = LINE('',#17274,#17275);+#17274 = CARTESIAN_POINT('',(-0.739779018515,2.584105623779E-02,+ 1.7450001));+#17275 = VECTOR('',#17276,1.);+#17276 = DIRECTION('',(0.517990116776,-0.855386602024,0.));+#17277 = PCURVE('',#17183,#17278);+#17278 = DEFINITIONAL_REPRESENTATION('',(#17279),#17283);+#17279 = LINE('',#17280,#17281);+#17280 = CARTESIAN_POINT('',(0.,0.));+#17281 = VECTOR('',#17282,1.);+#17282 = DIRECTION('',(1.,0.));+#17283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17284 = PCURVE('',#16824,#17285);+#17285 = DEFINITIONAL_REPRESENTATION('',(#17286),#17290);+#17286 = LINE('',#17287,#17288);+#17287 = CARTESIAN_POINT('',(0.231624101644,0.249271652245));+#17288 = VECTOR('',#17289,1.);+#17289 = DIRECTION('',(0.517990116776,-0.855386602024));+#17290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17291 = ADVANCED_FACE('',(#17292),#17259,.F.);+#17292 = FACE_BOUND('',#17293,.F.);+#17293 = EDGE_LOOP('',(#17294,#17295,#17318,#17346));+#17294 = ORIENTED_EDGE('',*,*,#17243,.T.);+#17295 = ORIENTED_EDGE('',*,*,#17296,.T.);+#17296 = EDGE_CURVE('',#17221,#17297,#17299,.T.);+#17297 = VERTEX_POINT('',#17298);+#17298 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.7050001)+ );+#17299 = SURFACE_CURVE('',#17300,(#17304,#17311),.PCURVE_S1.);+#17300 = LINE('',#17301,#17302);+#17301 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.7050001)+ );+#17302 = VECTOR('',#17303,1.);+#17303 = DIRECTION('',(-1.,0.,0.));+#17304 = PCURVE('',#17259,#17305);+#17305 = DEFINITIONAL_REPRESENTATION('',(#17306),#17310);+#17306 = LINE('',#17307,#17308);+#17307 = CARTESIAN_POINT('',(0.,-4.E-02));+#17308 = VECTOR('',#17309,1.);+#17309 = DIRECTION('',(1.,0.));+#17310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17311 = PCURVE('',#16770,#17312);+#17312 = DEFINITIONAL_REPRESENTATION('',(#17313),#17317);+#17313 = LINE('',#17314,#17315);+#17314 = CARTESIAN_POINT('',(0.382573686252,0.));+#17315 = VECTOR('',#17316,1.);+#17316 = DIRECTION('',(-1.,0.));+#17317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17318 = ORIENTED_EDGE('',*,*,#17319,.F.);+#17319 = EDGE_CURVE('',#17320,#17297,#17322,.T.);+#17320 = VERTEX_POINT('',#17321);+#17321 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.7450001)+ );+#17322 = SURFACE_CURVE('',#17323,(#17327,#17334),.PCURVE_S1.);+#17323 = LINE('',#17324,#17325);+#17324 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.7450001)+ );+#17325 = VECTOR('',#17326,1.);+#17326 = DIRECTION('',(-0.,-0.,-1.));+#17327 = PCURVE('',#17259,#17328);+#17328 = DEFINITIONAL_REPRESENTATION('',(#17329),#17333);+#17329 = LINE('',#17330,#17331);+#17330 = CARTESIAN_POINT('',(6.83842585805E-02,0.));+#17331 = VECTOR('',#17332,1.);+#17332 = DIRECTION('',(0.,-1.));+#17333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17334 = PCURVE('',#17335,#17340);+#17335 = PLANE('',#17336);+#17336 = AXIS2_PLACEMENT_3D('',#17337,#17338,#17339);+#17337 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.7450001)+ );+#17338 = DIRECTION('',(0.869073670978,0.494682680526,0.));+#17339 = DIRECTION('',(-0.494682680526,0.869073670978,0.));+#17340 = DEFINITIONAL_REPRESENTATION('',(#17341),#17345);+#17341 = LINE('',#17342,#17343);+#17342 = CARTESIAN_POINT('',(0.,0.));+#17343 = VECTOR('',#17344,1.);+#17344 = DIRECTION('',(0.,-1.));+#17345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17346 = ORIENTED_EDGE('',*,*,#17347,.F.);+#17347 = EDGE_CURVE('',#17244,#17320,#17348,.T.);+#17348 = SURFACE_CURVE('',#17349,(#17353,#17360),.PCURVE_S1.);+#17349 = LINE('',#17350,#17351);+#17350 = CARTESIAN_POINT('',(-0.588829433906,-0.223430596007,1.7450001)+ );+#17351 = VECTOR('',#17352,1.);+#17352 = DIRECTION('',(-1.,0.,0.));+#17353 = PCURVE('',#17259,#17354);+#17354 = DEFINITIONAL_REPRESENTATION('',(#17355),#17359);+#17355 = LINE('',#17356,#17357);+#17356 = CARTESIAN_POINT('',(0.,0.));+#17357 = VECTOR('',#17358,1.);+#17358 = DIRECTION('',(1.,0.));+#17359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17360 = PCURVE('',#16824,#17361);+#17361 = DEFINITIONAL_REPRESENTATION('',(#17362),#17366);+#17362 = LINE('',#17363,#17364);+#17363 = CARTESIAN_POINT('',(0.382573686252,0.));+#17364 = VECTOR('',#17365,1.);+#17365 = DIRECTION('',(-1.,0.));+#17366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17367 = ADVANCED_FACE('',(#17368),#17335,.F.);+#17368 = FACE_BOUND('',#17369,.F.);+#17369 = EDGE_LOOP('',(#17370,#17371,#17394,#17422));+#17370 = ORIENTED_EDGE('',*,*,#17319,.T.);+#17371 = ORIENTED_EDGE('',*,*,#17372,.T.);+#17372 = EDGE_CURVE('',#17297,#17373,#17375,.T.);+#17373 = VERTEX_POINT('',#17374);+#17374 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.7050001+ ));+#17375 = SURFACE_CURVE('',#17376,(#17380,#17387),.PCURVE_S1.);+#17376 = LINE('',#17377,#17378);+#17377 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.7050001)+ );+#17378 = VECTOR('',#17379,1.);+#17379 = DIRECTION('',(-0.494682680526,0.869073670978,0.));+#17380 = PCURVE('',#17335,#17381);+#17381 = DEFINITIONAL_REPRESENTATION('',(#17382),#17386);+#17382 = LINE('',#17383,#17384);+#17383 = CARTESIAN_POINT('',(0.,-4.E-02));+#17384 = VECTOR('',#17385,1.);+#17385 = DIRECTION('',(1.,0.));+#17386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17387 = PCURVE('',#16770,#17388);+#17388 = DEFINITIONAL_REPRESENTATION('',(#17389),#17393);+#17389 = LINE('',#17390,#17391);+#17390 = CARTESIAN_POINT('',(0.314189427672,0.));+#17391 = VECTOR('',#17392,1.);+#17392 = DIRECTION('',(-0.494682680526,0.869073670978));+#17393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17394 = ORIENTED_EDGE('',*,*,#17395,.F.);+#17395 = EDGE_CURVE('',#17396,#17373,#17398,.T.);+#17396 = VERTEX_POINT('',#17397);+#17397 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.7450001+ ));+#17398 = SURFACE_CURVE('',#17399,(#17403,#17410),.PCURVE_S1.);+#17399 = LINE('',#17400,#17401);+#17400 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.7450001+ ));+#17401 = VECTOR('',#17402,1.);+#17402 = DIRECTION('',(-0.,-0.,-1.));+#17403 = PCURVE('',#17335,#17404);+#17404 = DEFINITIONAL_REPRESENTATION('',(#17405),#17409);+#17405 = LINE('',#17406,#17407);+#17406 = CARTESIAN_POINT('',(0.233158250964,0.));+#17407 = VECTOR('',#17408,1.);+#17408 = DIRECTION('',(0.,-1.));+#17409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17410 = PCURVE('',#17411,#17416);+#17411 = PLANE('',#17412);+#17412 = AXIS2_PLACEMENT_3D('',#17413,#17414,#17415);+#17413 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.7450001+ ));+#17414 = DIRECTION('',(-0.852067543289,0.523431850076,0.));+#17415 = DIRECTION('',(-0.523431850076,-0.852067543289,0.));+#17416 = DEFINITIONAL_REPRESENTATION('',(#17417),#17421);+#17417 = LINE('',#17418,#17419);+#17418 = CARTESIAN_POINT('',(-1.773721884553E-17,0.));+#17419 = VECTOR('',#17420,1.);+#17420 = DIRECTION('',(0.,-1.));+#17421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17422 = ORIENTED_EDGE('',*,*,#17423,.F.);+#17423 = EDGE_CURVE('',#17320,#17396,#17424,.T.);+#17424 = SURFACE_CURVE('',#17425,(#17429,#17436),.PCURVE_S1.);+#17425 = LINE('',#17426,#17427);+#17426 = CARTESIAN_POINT('',(-0.657213692487,-0.223430596007,1.7450001)+ );+#17427 = VECTOR('',#17428,1.);+#17428 = DIRECTION('',(-0.494682680526,0.869073670978,0.));+#17429 = PCURVE('',#17335,#17430);+#17430 = DEFINITIONAL_REPRESENTATION('',(#17431),#17435);+#17431 = LINE('',#17432,#17433);+#17432 = CARTESIAN_POINT('',(0.,0.));+#17433 = VECTOR('',#17434,1.);+#17434 = DIRECTION('',(1.,0.));+#17435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17436 = PCURVE('',#16824,#17437);+#17437 = DEFINITIONAL_REPRESENTATION('',(#17438),#17442);+#17438 = LINE('',#17439,#17440);+#17439 = CARTESIAN_POINT('',(0.314189427672,0.));+#17440 = VECTOR('',#17441,1.);+#17441 = DIRECTION('',(-0.494682680526,0.869073670978));+#17442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17443 = ADVANCED_FACE('',(#17444),#17411,.F.);+#17444 = FACE_BOUND('',#17445,.F.);+#17445 = EDGE_LOOP('',(#17446,#17447,#17470,#17498));+#17446 = ORIENTED_EDGE('',*,*,#17395,.T.);+#17447 = ORIENTED_EDGE('',*,*,#17448,.T.);+#17448 = EDGE_CURVE('',#17373,#17449,#17451,.T.);+#17449 = VERTEX_POINT('',#17450);+#17450 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.7050001)+ );+#17451 = SURFACE_CURVE('',#17452,(#17456,#17463),.PCURVE_S1.);+#17452 = LINE('',#17453,#17454);+#17453 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.7050001+ ));+#17454 = VECTOR('',#17455,1.);+#17455 = DIRECTION('',(-0.523431850076,-0.852067543289,0.));+#17456 = PCURVE('',#17411,#17457);+#17457 = DEFINITIONAL_REPRESENTATION('',(#17458),#17462);+#17458 = LINE('',#17459,#17460);+#17459 = CARTESIAN_POINT('',(-0.,-4.E-02));+#17460 = VECTOR('',#17461,1.);+#17461 = DIRECTION('',(1.,0.));+#17462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17463 = PCURVE('',#16770,#17464);+#17464 = DEFINITIONAL_REPRESENTATION('',(#17465),#17469);+#17465 = LINE('',#17466,#17467);+#17466 = CARTESIAN_POINT('',(0.198850079098,0.202631697084));+#17467 = VECTOR('',#17468,1.);+#17468 = DIRECTION('',(-0.523431850076,-0.852067543289));+#17469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17470 = ORIENTED_EDGE('',*,*,#17471,.F.);+#17471 = EDGE_CURVE('',#17472,#17449,#17474,.T.);+#17472 = VERTEX_POINT('',#17473);+#17473 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.7450001)+ );+#17474 = SURFACE_CURVE('',#17475,(#17479,#17486),.PCURVE_S1.);+#17475 = LINE('',#17476,#17477);+#17476 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.7450001)+ );+#17477 = VECTOR('',#17478,1.);+#17478 = DIRECTION('',(-0.,-0.,-1.));+#17479 = PCURVE('',#17411,#17480);+#17480 = DEFINITIONAL_REPRESENTATION('',(#17481),#17485);+#17481 = LINE('',#17482,#17483);+#17482 = CARTESIAN_POINT('',(0.237811777576,0.));+#17483 = VECTOR('',#17484,1.);+#17484 = DIRECTION('',(0.,-1.));+#17485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17486 = PCURVE('',#17487,#17492);+#17487 = PLANE('',#17488);+#17488 = AXIS2_PLACEMENT_3D('',#17489,#17490,#17491);+#17489 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.7450001)+ );+#17490 = DIRECTION('',(0.,1.,0.));+#17491 = DIRECTION('',(-1.,0.,0.));+#17492 = DEFINITIONAL_REPRESENTATION('',(#17493),#17497);+#17493 = LINE('',#17494,#17495);+#17494 = CARTESIAN_POINT('',(0.,0.));+#17495 = VECTOR('',#17496,1.);+#17496 = DIRECTION('',(0.,-1.));+#17497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17498 = ORIENTED_EDGE('',*,*,#17499,.F.);+#17499 = EDGE_CURVE('',#17396,#17472,#17500,.T.);+#17500 = SURFACE_CURVE('',#17501,(#17505,#17512),.PCURVE_S1.);+#17501 = LINE('',#17502,#17503);+#17502 = CARTESIAN_POINT('',(-0.77255304106,-2.07988989231E-02,1.7450001+ ));+#17503 = VECTOR('',#17504,1.);+#17504 = DIRECTION('',(-0.523431850076,-0.852067543289,0.));+#17505 = PCURVE('',#17411,#17506);+#17506 = DEFINITIONAL_REPRESENTATION('',(#17507),#17511);+#17507 = LINE('',#17508,#17509);+#17508 = CARTESIAN_POINT('',(0.,0.));+#17509 = VECTOR('',#17510,1.);+#17510 = DIRECTION('',(1.,0.));+#17511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17512 = PCURVE('',#16824,#17513);+#17513 = DEFINITIONAL_REPRESENTATION('',(#17514),#17518);+#17514 = LINE('',#17515,#17516);+#17515 = CARTESIAN_POINT('',(0.198850079098,0.202631697084));+#17516 = VECTOR('',#17517,1.);+#17517 = DIRECTION('',(-0.523431850076,-0.852067543289));+#17518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17519 = ADVANCED_FACE('',(#17520),#17487,.F.);+#17520 = FACE_BOUND('',#17521,.F.);+#17521 = EDGE_LOOP('',(#17522,#17523,#17546,#17569));+#17522 = ORIENTED_EDGE('',*,*,#17471,.T.);+#17523 = ORIENTED_EDGE('',*,*,#17524,.T.);+#17524 = EDGE_CURVE('',#17449,#17525,#17527,.T.);+#17525 = VERTEX_POINT('',#17526);+#17526 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.7050001)+ );+#17527 = SURFACE_CURVE('',#17528,(#17532,#17539),.PCURVE_S1.);+#17528 = LINE('',#17529,#17530);+#17529 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.7050001)+ );+#17530 = VECTOR('',#17531,1.);+#17531 = DIRECTION('',(-1.,0.,0.));+#17532 = PCURVE('',#17487,#17533);+#17533 = DEFINITIONAL_REPRESENTATION('',(#17534),#17538);+#17534 = LINE('',#17535,#17536);+#17535 = CARTESIAN_POINT('',(0.,-4.E-02));+#17536 = VECTOR('',#17537,1.);+#17537 = DIRECTION('',(1.,0.));+#17538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17539 = PCURVE('',#16770,#17540);+#17540 = DEFINITIONAL_REPRESENTATION('',(#17541),#17545);+#17541 = LINE('',#17542,#17543);+#17542 = CARTESIAN_POINT('',(7.43718203917E-02,0.));+#17543 = VECTOR('',#17544,1.);+#17544 = DIRECTION('',(-1.,0.));+#17545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17546 = ORIENTED_EDGE('',*,*,#17547,.F.);+#17547 = EDGE_CURVE('',#17548,#17525,#17550,.T.);+#17548 = VERTEX_POINT('',#17549);+#17549 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.7450001)+ );+#17550 = SURFACE_CURVE('',#17551,(#17555,#17562),.PCURVE_S1.);+#17551 = LINE('',#17552,#17553);+#17552 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.7450001)+ );+#17553 = VECTOR('',#17554,1.);+#17554 = DIRECTION('',(-0.,-0.,-1.));+#17555 = PCURVE('',#17487,#17556);+#17556 = DEFINITIONAL_REPRESENTATION('',(#17557),#17561);+#17557 = LINE('',#17558,#17559);+#17558 = CARTESIAN_POINT('',(6.869939341267E-02,0.));+#17559 = VECTOR('',#17560,1.);+#17560 = DIRECTION('',(0.,-1.));+#17561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17562 = PCURVE('',#16742,#17563);+#17563 = DEFINITIONAL_REPRESENTATION('',(#17564),#17568);+#17564 = LINE('',#17565,#17566);+#17565 = CARTESIAN_POINT('',(0.,0.));+#17566 = VECTOR('',#17567,1.);+#17567 = DIRECTION('',(0.,-1.));+#17568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17569 = ORIENTED_EDGE('',*,*,#17570,.F.);+#17570 = EDGE_CURVE('',#17472,#17548,#17571,.T.);+#17571 = SURFACE_CURVE('',#17572,(#17576,#17583),.PCURVE_S1.);+#17572 = LINE('',#17573,#17574);+#17573 = CARTESIAN_POINT('',(-0.897031299767,-0.223430596007,1.7450001)+ );+#17574 = VECTOR('',#17575,1.);+#17575 = DIRECTION('',(-1.,0.,0.));+#17576 = PCURVE('',#17487,#17577);+#17577 = DEFINITIONAL_REPRESENTATION('',(#17578),#17582);+#17578 = LINE('',#17579,#17580);+#17579 = CARTESIAN_POINT('',(0.,0.));+#17580 = VECTOR('',#17581,1.);+#17581 = DIRECTION('',(1.,0.));+#17582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17583 = PCURVE('',#16824,#17584);+#17584 = DEFINITIONAL_REPRESENTATION('',(#17585),#17589);+#17585 = LINE('',#17586,#17587);+#17586 = CARTESIAN_POINT('',(7.43718203917E-02,0.));+#17587 = VECTOR('',#17588,1.);+#17588 = DIRECTION('',(-1.,0.));+#17589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17590 = ADVANCED_FACE('',(#17591),#16742,.F.);+#17591 = FACE_BOUND('',#17592,.F.);+#17592 = EDGE_LOOP('',(#17593,#17594,#17615,#17616));+#17593 = ORIENTED_EDGE('',*,*,#17547,.T.);+#17594 = ORIENTED_EDGE('',*,*,#17595,.T.);+#17595 = EDGE_CURVE('',#17525,#16722,#17596,.T.);+#17596 = SURFACE_CURVE('',#17597,(#17601,#17608),.PCURVE_S1.);+#17597 = LINE('',#17598,#17599);+#17598 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.7050001)+ );+#17599 = VECTOR('',#17600,1.);+#17600 = DIRECTION('',(0.534314599555,0.845285696497,0.));+#17601 = PCURVE('',#16742,#17602);+#17602 = DEFINITIONAL_REPRESENTATION('',(#17603),#17607);+#17603 = LINE('',#17604,#17605);+#17604 = CARTESIAN_POINT('',(0.,-4.E-02));+#17605 = VECTOR('',#17606,1.);+#17606 = DIRECTION('',(1.,0.));+#17607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17608 = PCURVE('',#16770,#17609);+#17609 = DEFINITIONAL_REPRESENTATION('',(#17610),#17614);+#17610 = LINE('',#17611,#17612);+#17611 = CARTESIAN_POINT('',(5.672426979028E-03,0.));+#17612 = VECTOR('',#17613,1.);+#17613 = DIRECTION('',(0.534314599555,0.845285696497));+#17614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17615 = ORIENTED_EDGE('',*,*,#16719,.F.);+#17616 = ORIENTED_EDGE('',*,*,#17617,.F.);+#17617 = EDGE_CURVE('',#17548,#16720,#17618,.T.);+#17618 = SURFACE_CURVE('',#17619,(#17623,#17630),.PCURVE_S1.);+#17619 = LINE('',#17620,#17621);+#17620 = CARTESIAN_POINT('',(-0.965730693179,-0.223430596007,1.7450001)+ );+#17621 = VECTOR('',#17622,1.);+#17622 = DIRECTION('',(0.534314599555,0.845285696497,0.));+#17623 = PCURVE('',#16742,#17624);+#17624 = DEFINITIONAL_REPRESENTATION('',(#17625),#17629);+#17625 = LINE('',#17626,#17627);+#17626 = CARTESIAN_POINT('',(0.,0.));+#17627 = VECTOR('',#17628,1.);+#17628 = DIRECTION('',(1.,0.));+#17629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17630 = PCURVE('',#16824,#17631);+#17631 = DEFINITIONAL_REPRESENTATION('',(#17632),#17636);+#17632 = LINE('',#17633,#17634);+#17633 = CARTESIAN_POINT('',(5.672426979028E-03,0.));+#17634 = VECTOR('',#17635,1.);+#17635 = DIRECTION('',(0.534314599555,0.845285696497));+#17636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17637 = ADVANCED_FACE('',(#17638),#16824,.T.);+#17638 = FACE_BOUND('',#17639,.F.);+#17639 = EDGE_LOOP('',(#17640,#17641,#17642,#17643,#17644,#17645,#17646,+ #17647,#17648,#17649,#17650,#17651));+#17640 = ORIENTED_EDGE('',*,*,#16810,.T.);+#17641 = ORIENTED_EDGE('',*,*,#16891,.T.);+#17642 = ORIENTED_EDGE('',*,*,#16967,.T.);+#17643 = ORIENTED_EDGE('',*,*,#17043,.T.);+#17644 = ORIENTED_EDGE('',*,*,#17119,.T.);+#17645 = ORIENTED_EDGE('',*,*,#17195,.T.);+#17646 = ORIENTED_EDGE('',*,*,#17271,.T.);+#17647 = ORIENTED_EDGE('',*,*,#17347,.T.);+#17648 = ORIENTED_EDGE('',*,*,#17423,.T.);+#17649 = ORIENTED_EDGE('',*,*,#17499,.T.);+#17650 = ORIENTED_EDGE('',*,*,#17570,.T.);+#17651 = ORIENTED_EDGE('',*,*,#17617,.T.);+#17652 = ADVANCED_FACE('',(#17653),#16770,.F.);+#17653 = FACE_BOUND('',#17654,.T.);+#17654 = EDGE_LOOP('',(#17655,#17656,#17657,#17658,#17659,#17660,#17661,+ #17662,#17663,#17664,#17665,#17666));+#17655 = ORIENTED_EDGE('',*,*,#16754,.T.);+#17656 = ORIENTED_EDGE('',*,*,#16840,.T.);+#17657 = ORIENTED_EDGE('',*,*,#16916,.T.);+#17658 = ORIENTED_EDGE('',*,*,#16992,.T.);+#17659 = ORIENTED_EDGE('',*,*,#17068,.T.);+#17660 = ORIENTED_EDGE('',*,*,#17144,.T.);+#17661 = ORIENTED_EDGE('',*,*,#17220,.T.);+#17662 = ORIENTED_EDGE('',*,*,#17296,.T.);+#17663 = ORIENTED_EDGE('',*,*,#17372,.T.);+#17664 = ORIENTED_EDGE('',*,*,#17448,.T.);+#17665 = ORIENTED_EDGE('',*,*,#17524,.T.);+#17666 = ORIENTED_EDGE('',*,*,#17595,.T.);+#17667 = MANIFOLD_SOLID_BREP('',#17668);+#17668 = CLOSED_SHELL('',(#17669,#17789,#17865,#17941,#18017,#18088,+ #18135,#18144));+#17669 = ADVANCED_FACE('',(#17670),#17684,.F.);+#17670 = FACE_BOUND('',#17671,.F.);+#17671 = EDGE_LOOP('',(#17672,#17707,#17735,#17763));+#17672 = ORIENTED_EDGE('',*,*,#17673,.T.);+#17673 = EDGE_CURVE('',#17674,#17676,#17678,.T.);+#17674 = VERTEX_POINT('',#17675);+#17675 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.7450001)+ );+#17676 = VERTEX_POINT('',#17677);+#17677 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.7050001)+ );+#17678 = SURFACE_CURVE('',#17679,(#17683,#17695),.PCURVE_S1.);+#17679 = LINE('',#17680,#17681);+#17680 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.7450001)+ );+#17681 = VECTOR('',#17682,1.);+#17682 = DIRECTION('',(-0.,-0.,-1.));+#17683 = PCURVE('',#17684,#17689);+#17684 = PLANE('',#17685);+#17685 = AXIS2_PLACEMENT_3D('',#17686,#17687,#17688);+#17686 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.7450001)+ );+#17687 = DIRECTION('',(1.,0.,0.));+#17688 = DIRECTION('',(0.,1.,0.));+#17689 = DEFINITIONAL_REPRESENTATION('',(#17690),#17694);+#17690 = LINE('',#17691,#17692);+#17691 = CARTESIAN_POINT('',(0.,0.));+#17692 = VECTOR('',#17693,1.);+#17693 = DIRECTION('',(0.,-1.));+#17694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17695 = PCURVE('',#17696,#17701);+#17696 = PLANE('',#17697);+#17697 = AXIS2_PLACEMENT_3D('',#17698,#17699,#17700);+#17698 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.7450001)+ );+#17699 = DIRECTION('',(0.,1.,0.));+#17700 = DIRECTION('',(-1.,0.,0.));+#17701 = DEFINITIONAL_REPRESENTATION('',(#17702),#17706);+#17702 = LINE('',#17703,#17704);+#17703 = CARTESIAN_POINT('',(0.291184584923,0.));+#17704 = VECTOR('',#17705,1.);+#17705 = DIRECTION('',(0.,-1.));+#17706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17707 = ORIENTED_EDGE('',*,*,#17708,.T.);+#17708 = EDGE_CURVE('',#17676,#17709,#17711,.T.);+#17709 = VERTEX_POINT('',#17710);+#17710 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.7050001));+#17711 = SURFACE_CURVE('',#17712,(#17716,#17723),.PCURVE_S1.);+#17712 = LINE('',#17713,#17714);+#17713 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.7050001)+ );+#17714 = VECTOR('',#17715,1.);+#17715 = DIRECTION('',(0.,1.,0.));+#17716 = PCURVE('',#17684,#17717);+#17717 = DEFINITIONAL_REPRESENTATION('',(#17718),#17722);+#17718 = LINE('',#17719,#17720);+#17719 = CARTESIAN_POINT('',(0.,-4.E-02));+#17720 = VECTOR('',#17721,1.);+#17721 = DIRECTION('',(1.,0.));+#17722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17723 = PCURVE('',#17724,#17729);+#17724 = PLANE('',#17725);+#17725 = AXIS2_PLACEMENT_3D('',#17726,#17727,#17728);+#17726 = CARTESIAN_POINT('',(-0.582841872095,-0.223430596007,1.7050001)+ );+#17727 = DIRECTION('',(0.,0.,1.));+#17728 = DIRECTION('',(1.,0.,0.));+#17729 = DEFINITIONAL_REPRESENTATION('',(#17730),#17734);+#17730 = LINE('',#17731,#17732);+#17731 = CARTESIAN_POINT('',(6.775398891617E-02,0.));+#17732 = VECTOR('',#17733,1.);+#17733 = DIRECTION('',(0.,1.));+#17734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17735 = ORIENTED_EDGE('',*,*,#17736,.F.);+#17736 = EDGE_CURVE('',#17737,#17709,#17739,.T.);+#17737 = VERTEX_POINT('',#17738);+#17738 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.7450001));+#17739 = SURFACE_CURVE('',#17740,(#17744,#17751),.PCURVE_S1.);+#17740 = LINE('',#17741,#17742);+#17741 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.7450001));+#17742 = VECTOR('',#17743,1.);+#17743 = DIRECTION('',(-0.,-0.,-1.));+#17744 = PCURVE('',#17684,#17745);+#17745 = DEFINITIONAL_REPRESENTATION('',(#17746),#17750);+#17746 = LINE('',#17747,#17748);+#17747 = CARTESIAN_POINT('',(0.470496304427,0.));+#17748 = VECTOR('',#17749,1.);+#17749 = DIRECTION('',(0.,-1.));+#17750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17751 = PCURVE('',#17752,#17757);+#17752 = PLANE('',#17753);+#17753 = AXIS2_PLACEMENT_3D('',#17754,#17755,#17756);+#17754 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.7450001));+#17755 = DIRECTION('',(0.,-1.,0.));+#17756 = DIRECTION('',(1.,0.,0.));+#17757 = DEFINITIONAL_REPRESENTATION('',(#17758),#17762);+#17758 = LINE('',#17759,#17760);+#17759 = CARTESIAN_POINT('',(0.,0.));+#17760 = VECTOR('',#17761,1.);+#17761 = DIRECTION('',(0.,-1.));+#17762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17763 = ORIENTED_EDGE('',*,*,#17764,.F.);+#17764 = EDGE_CURVE('',#17674,#17737,#17765,.T.);+#17765 = SURFACE_CURVE('',#17766,(#17770,#17777),.PCURVE_S1.);+#17766 = LINE('',#17767,#17768);+#17767 = CARTESIAN_POINT('',(-0.515087883179,-0.223430596007,1.7450001)+ );+#17768 = VECTOR('',#17769,1.);+#17769 = DIRECTION('',(0.,1.,0.));+#17770 = PCURVE('',#17684,#17771);+#17771 = DEFINITIONAL_REPRESENTATION('',(#17772),#17776);+#17772 = LINE('',#17773,#17774);+#17773 = CARTESIAN_POINT('',(0.,0.));+#17774 = VECTOR('',#17775,1.);+#17775 = DIRECTION('',(1.,0.));+#17776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17777 = PCURVE('',#17778,#17783);+#17778 = PLANE('',#17779);+#17779 = AXIS2_PLACEMENT_3D('',#17780,#17781,#17782);+#17780 = CARTESIAN_POINT('',(-0.582841872095,-0.223430596007,1.7450001)+ );+#17781 = DIRECTION('',(0.,0.,1.));+#17782 = DIRECTION('',(1.,0.,0.));+#17783 = DEFINITIONAL_REPRESENTATION('',(#17784),#17788);+#17784 = LINE('',#17785,#17786);+#17785 = CARTESIAN_POINT('',(6.775398891617E-02,0.));+#17786 = VECTOR('',#17787,1.);+#17787 = DIRECTION('',(0.,1.));+#17788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17789 = ADVANCED_FACE('',(#17790),#17752,.F.);+#17790 = FACE_BOUND('',#17791,.F.);+#17791 = EDGE_LOOP('',(#17792,#17793,#17816,#17844));+#17792 = ORIENTED_EDGE('',*,*,#17736,.T.);+#17793 = ORIENTED_EDGE('',*,*,#17794,.T.);+#17794 = EDGE_CURVE('',#17709,#17795,#17797,.T.);+#17795 = VERTEX_POINT('',#17796);+#17796 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.7050001));+#17797 = SURFACE_CURVE('',#17798,(#17802,#17809),.PCURVE_S1.);+#17798 = LINE('',#17799,#17800);+#17799 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.7050001));+#17800 = VECTOR('',#17801,1.);+#17801 = DIRECTION('',(1.,0.,0.));+#17802 = PCURVE('',#17752,#17803);+#17803 = DEFINITIONAL_REPRESENTATION('',(#17804),#17808);+#17804 = LINE('',#17805,#17806);+#17805 = CARTESIAN_POINT('',(0.,-4.E-02));+#17806 = VECTOR('',#17807,1.);+#17807 = DIRECTION('',(1.,0.));+#17808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17809 = PCURVE('',#17724,#17810);+#17810 = DEFINITIONAL_REPRESENTATION('',(#17811),#17815);+#17811 = LINE('',#17812,#17813);+#17812 = CARTESIAN_POINT('',(6.775398891617E-02,0.470496304427));+#17813 = VECTOR('',#17814,1.);+#17814 = DIRECTION('',(1.,0.));+#17815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17816 = ORIENTED_EDGE('',*,*,#17817,.F.);+#17817 = EDGE_CURVE('',#17818,#17795,#17820,.T.);+#17818 = VERTEX_POINT('',#17819);+#17819 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.7450001));+#17820 = SURFACE_CURVE('',#17821,(#17825,#17832),.PCURVE_S1.);+#17821 = LINE('',#17822,#17823);+#17822 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.7450001));+#17823 = VECTOR('',#17824,1.);+#17824 = DIRECTION('',(-0.,-0.,-1.));+#17825 = PCURVE('',#17752,#17826);+#17826 = DEFINITIONAL_REPRESENTATION('',(#17827),#17831);+#17827 = LINE('',#17828,#17829);+#17828 = CARTESIAN_POINT('',(6.397237093015E-02,0.));+#17829 = VECTOR('',#17830,1.);+#17830 = DIRECTION('',(0.,-1.));+#17831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17832 = PCURVE('',#17833,#17838);+#17833 = PLANE('',#17834);+#17834 = AXIS2_PLACEMENT_3D('',#17835,#17836,#17837);+#17835 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.7450001));+#17836 = DIRECTION('',(-1.,0.,0.));+#17837 = DIRECTION('',(0.,-1.,0.));+#17838 = DEFINITIONAL_REPRESENTATION('',(#17839),#17843);+#17839 = LINE('',#17840,#17841);+#17840 = CARTESIAN_POINT('',(0.,0.));+#17841 = VECTOR('',#17842,1.);+#17842 = DIRECTION('',(0.,-1.));+#17843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17844 = ORIENTED_EDGE('',*,*,#17845,.F.);+#17845 = EDGE_CURVE('',#17737,#17818,#17846,.T.);+#17846 = SURFACE_CURVE('',#17847,(#17851,#17858),.PCURVE_S1.);+#17847 = LINE('',#17848,#17849);+#17848 = CARTESIAN_POINT('',(-0.515087883179,0.24706570842,1.7450001));+#17849 = VECTOR('',#17850,1.);+#17850 = DIRECTION('',(1.,0.,0.));+#17851 = PCURVE('',#17752,#17852);+#17852 = DEFINITIONAL_REPRESENTATION('',(#17853),#17857);+#17853 = LINE('',#17854,#17855);+#17854 = CARTESIAN_POINT('',(0.,0.));+#17855 = VECTOR('',#17856,1.);+#17856 = DIRECTION('',(1.,0.));+#17857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17858 = PCURVE('',#17778,#17859);+#17859 = DEFINITIONAL_REPRESENTATION('',(#17860),#17864);+#17860 = LINE('',#17861,#17862);+#17861 = CARTESIAN_POINT('',(6.775398891617E-02,0.470496304427));+#17862 = VECTOR('',#17863,1.);+#17863 = DIRECTION('',(1.,0.));+#17864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17865 = ADVANCED_FACE('',(#17866),#17833,.F.);+#17866 = FACE_BOUND('',#17867,.F.);+#17867 = EDGE_LOOP('',(#17868,#17869,#17892,#17920));+#17868 = ORIENTED_EDGE('',*,*,#17817,.T.);+#17869 = ORIENTED_EDGE('',*,*,#17870,.T.);+#17870 = EDGE_CURVE('',#17795,#17871,#17873,.T.);+#17871 = VERTEX_POINT('',#17872);+#17872 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.7050001)+ );+#17873 = SURFACE_CURVE('',#17874,(#17878,#17885),.PCURVE_S1.);+#17874 = LINE('',#17875,#17876);+#17875 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.7050001));+#17876 = VECTOR('',#17877,1.);+#17877 = DIRECTION('',(0.,-1.,0.));+#17878 = PCURVE('',#17833,#17879);+#17879 = DEFINITIONAL_REPRESENTATION('',(#17880),#17884);+#17880 = LINE('',#17881,#17882);+#17881 = CARTESIAN_POINT('',(0.,-4.E-02));+#17882 = VECTOR('',#17883,1.);+#17883 = DIRECTION('',(1.,0.));+#17884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17885 = PCURVE('',#17724,#17886);+#17886 = DEFINITIONAL_REPRESENTATION('',(#17887),#17891);+#17887 = LINE('',#17888,#17889);+#17888 = CARTESIAN_POINT('',(0.131726359846,0.470496304427));+#17889 = VECTOR('',#17890,1.);+#17890 = DIRECTION('',(0.,-1.));+#17891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17892 = ORIENTED_EDGE('',*,*,#17893,.F.);+#17893 = EDGE_CURVE('',#17894,#17871,#17896,.T.);+#17894 = VERTEX_POINT('',#17895);+#17895 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.7450001)+ );+#17896 = SURFACE_CURVE('',#17897,(#17901,#17908),.PCURVE_S1.);+#17897 = LINE('',#17898,#17899);+#17898 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.7450001)+ );+#17899 = VECTOR('',#17900,1.);+#17900 = DIRECTION('',(-0.,-0.,-1.));+#17901 = PCURVE('',#17833,#17902);+#17902 = DEFINITIONAL_REPRESENTATION('',(#17903),#17907);+#17903 = LINE('',#17904,#17905);+#17904 = CARTESIAN_POINT('',(0.416923382959,0.));+#17905 = VECTOR('',#17906,1.);+#17906 = DIRECTION('',(0.,-1.));+#17907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17908 = PCURVE('',#17909,#17914);+#17909 = PLANE('',#17910);+#17910 = AXIS2_PLACEMENT_3D('',#17911,#17912,#17913);+#17911 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.7450001)+ );+#17912 = DIRECTION('',(0.,-1.,0.));+#17913 = DIRECTION('',(1.,0.,0.));+#17914 = DEFINITIONAL_REPRESENTATION('',(#17915),#17919);+#17915 = LINE('',#17916,#17917);+#17916 = CARTESIAN_POINT('',(0.,0.));+#17917 = VECTOR('',#17918,1.);+#17918 = DIRECTION('',(0.,-1.));+#17919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17920 = ORIENTED_EDGE('',*,*,#17921,.F.);+#17921 = EDGE_CURVE('',#17818,#17894,#17922,.T.);+#17922 = SURFACE_CURVE('',#17923,(#17927,#17934),.PCURVE_S1.);+#17923 = LINE('',#17924,#17925);+#17924 = CARTESIAN_POINT('',(-0.451115512249,0.24706570842,1.7450001));+#17925 = VECTOR('',#17926,1.);+#17926 = DIRECTION('',(0.,-1.,0.));+#17927 = PCURVE('',#17833,#17928);+#17928 = DEFINITIONAL_REPRESENTATION('',(#17929),#17933);+#17929 = LINE('',#17930,#17931);+#17930 = CARTESIAN_POINT('',(0.,0.));+#17931 = VECTOR('',#17932,1.);+#17932 = DIRECTION('',(1.,0.));+#17933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17934 = PCURVE('',#17778,#17935);+#17935 = DEFINITIONAL_REPRESENTATION('',(#17936),#17940);+#17936 = LINE('',#17937,#17938);+#17937 = CARTESIAN_POINT('',(0.131726359846,0.470496304427));+#17938 = VECTOR('',#17939,1.);+#17939 = DIRECTION('',(0.,-1.));+#17940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17941 = ADVANCED_FACE('',(#17942),#17909,.F.);+#17942 = FACE_BOUND('',#17943,.F.);+#17943 = EDGE_LOOP('',(#17944,#17945,#17968,#17996));+#17944 = ORIENTED_EDGE('',*,*,#17893,.T.);+#17945 = ORIENTED_EDGE('',*,*,#17946,.T.);+#17946 = EDGE_CURVE('',#17871,#17947,#17949,.T.);+#17947 = VERTEX_POINT('',#17948);+#17948 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.7050001)+ );+#17949 = SURFACE_CURVE('',#17950,(#17954,#17961),.PCURVE_S1.);+#17950 = LINE('',#17951,#17952);+#17951 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.7050001)+ );+#17952 = VECTOR('',#17953,1.);+#17953 = DIRECTION('',(1.,0.,0.));+#17954 = PCURVE('',#17909,#17955);+#17955 = DEFINITIONAL_REPRESENTATION('',(#17956),#17960);+#17956 = LINE('',#17957,#17958);+#17957 = CARTESIAN_POINT('',(0.,-4.E-02));+#17958 = VECTOR('',#17959,1.);+#17959 = DIRECTION('',(1.,0.));+#17960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17961 = PCURVE('',#17724,#17962);+#17962 = DEFINITIONAL_REPRESENTATION('',(#17963),#17967);+#17963 = LINE('',#17964,#17965);+#17964 = CARTESIAN_POINT('',(0.131726359846,5.35729214686E-02));+#17965 = VECTOR('',#17966,1.);+#17966 = DIRECTION('',(1.,0.));+#17967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17968 = ORIENTED_EDGE('',*,*,#17969,.F.);+#17969 = EDGE_CURVE('',#17970,#17947,#17972,.T.);+#17970 = VERTEX_POINT('',#17971);+#17971 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.7450001)+ );+#17972 = SURFACE_CURVE('',#17973,(#17977,#17984),.PCURVE_S1.);+#17973 = LINE('',#17974,#17975);+#17974 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.7450001)+ );+#17975 = VECTOR('',#17976,1.);+#17976 = DIRECTION('',(-0.,-0.,-1.));+#17977 = PCURVE('',#17909,#17978);+#17978 = DEFINITIONAL_REPRESENTATION('',(#17979),#17983);+#17979 = LINE('',#17980,#17981);+#17980 = CARTESIAN_POINT('',(0.227212213993,0.));+#17981 = VECTOR('',#17982,1.);+#17982 = DIRECTION('',(0.,-1.));+#17983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17984 = PCURVE('',#17985,#17990);+#17985 = PLANE('',#17986);+#17986 = AXIS2_PLACEMENT_3D('',#17987,#17988,#17989);+#17987 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.7450001)+ );+#17988 = DIRECTION('',(-1.,0.,0.));+#17989 = DIRECTION('',(0.,-1.,0.));+#17990 = DEFINITIONAL_REPRESENTATION('',(#17991),#17995);+#17991 = LINE('',#17992,#17993);+#17992 = CARTESIAN_POINT('',(0.,0.));+#17993 = VECTOR('',#17994,1.);+#17994 = DIRECTION('',(0.,-1.));+#17995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17996 = ORIENTED_EDGE('',*,*,#17997,.F.);+#17997 = EDGE_CURVE('',#17894,#17970,#17998,.T.);+#17998 = SURFACE_CURVE('',#17999,(#18003,#18010),.PCURVE_S1.);+#17999 = LINE('',#18000,#18001);+#18000 = CARTESIAN_POINT('',(-0.451115512249,-0.169857674539,1.7450001)+ );+#18001 = VECTOR('',#18002,1.);+#18002 = DIRECTION('',(1.,0.,0.));+#18003 = PCURVE('',#17909,#18004);+#18004 = DEFINITIONAL_REPRESENTATION('',(#18005),#18009);+#18005 = LINE('',#18006,#18007);+#18006 = CARTESIAN_POINT('',(0.,0.));+#18007 = VECTOR('',#18008,1.);+#18008 = DIRECTION('',(1.,0.));+#18009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18010 = PCURVE('',#17778,#18011);+#18011 = DEFINITIONAL_REPRESENTATION('',(#18012),#18016);+#18012 = LINE('',#18013,#18014);+#18013 = CARTESIAN_POINT('',(0.131726359846,5.35729214686E-02));+#18014 = VECTOR('',#18015,1.);+#18015 = DIRECTION('',(1.,0.));+#18016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18017 = ADVANCED_FACE('',(#18018),#17985,.F.);+#18018 = FACE_BOUND('',#18019,.F.);+#18019 = EDGE_LOOP('',(#18020,#18021,#18044,#18067));+#18020 = ORIENTED_EDGE('',*,*,#17969,.T.);+#18021 = ORIENTED_EDGE('',*,*,#18022,.T.);+#18022 = EDGE_CURVE('',#17947,#18023,#18025,.T.);+#18023 = VERTEX_POINT('',#18024);+#18024 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.7050001)+ );+#18025 = SURFACE_CURVE('',#18026,(#18030,#18037),.PCURVE_S1.);+#18026 = LINE('',#18027,#18028);+#18027 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.7050001)+ );+#18028 = VECTOR('',#18029,1.);+#18029 = DIRECTION('',(0.,-1.,0.));+#18030 = PCURVE('',#17985,#18031);+#18031 = DEFINITIONAL_REPRESENTATION('',(#18032),#18036);+#18032 = LINE('',#18033,#18034);+#18033 = CARTESIAN_POINT('',(0.,-4.E-02));+#18034 = VECTOR('',#18035,1.);+#18035 = DIRECTION('',(1.,0.));+#18036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18037 = PCURVE('',#17724,#18038);+#18038 = DEFINITIONAL_REPRESENTATION('',(#18039),#18043);+#18039 = LINE('',#18040,#18041);+#18040 = CARTESIAN_POINT('',(0.35893857384,5.35729214686E-02));+#18041 = VECTOR('',#18042,1.);+#18042 = DIRECTION('',(0.,-1.));+#18043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18044 = ORIENTED_EDGE('',*,*,#18045,.F.);+#18045 = EDGE_CURVE('',#18046,#18023,#18048,.T.);+#18046 = VERTEX_POINT('',#18047);+#18047 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.7450001)+ );+#18048 = SURFACE_CURVE('',#18049,(#18053,#18060),.PCURVE_S1.);+#18049 = LINE('',#18050,#18051);+#18050 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.7450001)+ );+#18051 = VECTOR('',#18052,1.);+#18052 = DIRECTION('',(-0.,-0.,-1.));+#18053 = PCURVE('',#17985,#18054);+#18054 = DEFINITIONAL_REPRESENTATION('',(#18055),#18059);+#18055 = LINE('',#18056,#18057);+#18056 = CARTESIAN_POINT('',(5.35729214686E-02,0.));+#18057 = VECTOR('',#18058,1.);+#18058 = DIRECTION('',(0.,-1.));+#18059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18060 = PCURVE('',#17696,#18061);+#18061 = DEFINITIONAL_REPRESENTATION('',(#18062),#18066);+#18062 = LINE('',#18063,#18064);+#18063 = CARTESIAN_POINT('',(0.,0.));+#18064 = VECTOR('',#18065,1.);+#18065 = DIRECTION('',(0.,-1.));+#18066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18067 = ORIENTED_EDGE('',*,*,#18068,.F.);+#18068 = EDGE_CURVE('',#17970,#18046,#18069,.T.);+#18069 = SURFACE_CURVE('',#18070,(#18074,#18081),.PCURVE_S1.);+#18070 = LINE('',#18071,#18072);+#18071 = CARTESIAN_POINT('',(-0.223903298256,-0.169857674539,1.7450001)+ );+#18072 = VECTOR('',#18073,1.);+#18073 = DIRECTION('',(0.,-1.,0.));+#18074 = PCURVE('',#17985,#18075);+#18075 = DEFINITIONAL_REPRESENTATION('',(#18076),#18080);+#18076 = LINE('',#18077,#18078);+#18077 = CARTESIAN_POINT('',(0.,0.));+#18078 = VECTOR('',#18079,1.);+#18079 = DIRECTION('',(1.,0.));+#18080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18081 = PCURVE('',#17778,#18082);+#18082 = DEFINITIONAL_REPRESENTATION('',(#18083),#18087);+#18083 = LINE('',#18084,#18085);+#18084 = CARTESIAN_POINT('',(0.35893857384,5.35729214686E-02));+#18085 = VECTOR('',#18086,1.);+#18086 = DIRECTION('',(0.,-1.));+#18087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18088 = ADVANCED_FACE('',(#18089),#17696,.F.);+#18089 = FACE_BOUND('',#18090,.F.);+#18090 = EDGE_LOOP('',(#18091,#18092,#18113,#18114));+#18091 = ORIENTED_EDGE('',*,*,#18045,.T.);+#18092 = ORIENTED_EDGE('',*,*,#18093,.T.);+#18093 = EDGE_CURVE('',#18023,#17676,#18094,.T.);+#18094 = SURFACE_CURVE('',#18095,(#18099,#18106),.PCURVE_S1.);+#18095 = LINE('',#18096,#18097);+#18096 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.7050001)+ );+#18097 = VECTOR('',#18098,1.);+#18098 = DIRECTION('',(-1.,0.,0.));+#18099 = PCURVE('',#17696,#18100);+#18100 = DEFINITIONAL_REPRESENTATION('',(#18101),#18105);+#18101 = LINE('',#18102,#18103);+#18102 = CARTESIAN_POINT('',(0.,-4.E-02));+#18103 = VECTOR('',#18104,1.);+#18104 = DIRECTION('',(1.,0.));+#18105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18106 = PCURVE('',#17724,#18107);+#18107 = DEFINITIONAL_REPRESENTATION('',(#18108),#18112);+#18108 = LINE('',#18109,#18110);+#18109 = CARTESIAN_POINT('',(0.35893857384,0.));+#18110 = VECTOR('',#18111,1.);+#18111 = DIRECTION('',(-1.,0.));+#18112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18113 = ORIENTED_EDGE('',*,*,#17673,.F.);+#18114 = ORIENTED_EDGE('',*,*,#18115,.F.);+#18115 = EDGE_CURVE('',#18046,#17674,#18116,.T.);+#18116 = SURFACE_CURVE('',#18117,(#18121,#18128),.PCURVE_S1.);+#18117 = LINE('',#18118,#18119);+#18118 = CARTESIAN_POINT('',(-0.223903298256,-0.223430596007,1.7450001)+ );+#18119 = VECTOR('',#18120,1.);+#18120 = DIRECTION('',(-1.,0.,0.));+#18121 = PCURVE('',#17696,#18122);+#18122 = DEFINITIONAL_REPRESENTATION('',(#18123),#18127);+#18123 = LINE('',#18124,#18125);+#18124 = CARTESIAN_POINT('',(0.,0.));+#18125 = VECTOR('',#18126,1.);+#18126 = DIRECTION('',(1.,0.));+#18127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18128 = PCURVE('',#17778,#18129);+#18129 = DEFINITIONAL_REPRESENTATION('',(#18130),#18134);+#18130 = LINE('',#18131,#18132);+#18131 = CARTESIAN_POINT('',(0.35893857384,0.));+#18132 = VECTOR('',#18133,1.);+#18133 = DIRECTION('',(-1.,0.));+#18134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18135 = ADVANCED_FACE('',(#18136),#17778,.T.);+#18136 = FACE_BOUND('',#18137,.F.);+#18137 = EDGE_LOOP('',(#18138,#18139,#18140,#18141,#18142,#18143));+#18138 = ORIENTED_EDGE('',*,*,#17764,.T.);+#18139 = ORIENTED_EDGE('',*,*,#17845,.T.);+#18140 = ORIENTED_EDGE('',*,*,#17921,.T.);+#18141 = ORIENTED_EDGE('',*,*,#17997,.T.);+#18142 = ORIENTED_EDGE('',*,*,#18068,.T.);+#18143 = ORIENTED_EDGE('',*,*,#18115,.T.);+#18144 = ADVANCED_FACE('',(#18145),#17724,.F.);+#18145 = FACE_BOUND('',#18146,.T.);+#18146 = EDGE_LOOP('',(#18147,#18148,#18149,#18150,#18151,#18152));+#18147 = ORIENTED_EDGE('',*,*,#17708,.T.);+#18148 = ORIENTED_EDGE('',*,*,#17794,.T.);+#18149 = ORIENTED_EDGE('',*,*,#17870,.T.);+#18150 = ORIENTED_EDGE('',*,*,#17946,.T.);+#18151 = ORIENTED_EDGE('',*,*,#18022,.T.);+#18152 = ORIENTED_EDGE('',*,*,#18093,.T.);+#18153 = MANIFOLD_SOLID_BREP('',#18154);+#18154 = CLOSED_SHELL('',(#18155,#18277,#18353,#18429,#18505,#18583,+ #18661,#18739,#18817,#18895,#18973,#19051,#19129,#19205,#19283,+ #19361,#19439,#19517,#19595,#19673,#19751,#19822,#19869,#19894));+#18155 = ADVANCED_FACE('',(#18156),#18170,.F.);+#18156 = FACE_BOUND('',#18157,.F.);+#18157 = EDGE_LOOP('',(#18158,#18195,#18223,#18251));+#18158 = ORIENTED_EDGE('',*,*,#18159,.T.);+#18159 = EDGE_CURVE('',#18160,#18162,#18164,.T.);+#18160 = VERTEX_POINT('',#18161);+#18161 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,+ 1.7450001));+#18162 = VERTEX_POINT('',#18163);+#18163 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,+ 1.7050001));+#18164 = SURFACE_CURVE('',#18165,(#18169,#18181),.PCURVE_S1.);+#18165 = LINE('',#18166,#18167);+#18166 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,+ 1.7450001));+#18167 = VECTOR('',#18168,1.);+#18168 = DIRECTION('',(-0.,-0.,-1.));+#18169 = PCURVE('',#18170,#18175);+#18170 = PLANE('',#18171);+#18171 = AXIS2_PLACEMENT_3D('',#18172,#18173,#18174);+#18172 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,+ 1.7450001));+#18173 = DIRECTION('',(1.,0.,0.));+#18174 = DIRECTION('',(0.,1.,0.));+#18175 = DEFINITIONAL_REPRESENTATION('',(#18176),#18180);+#18176 = LINE('',#18177,#18178);+#18177 = CARTESIAN_POINT('',(0.,0.));+#18178 = VECTOR('',#18179,1.);+#18179 = DIRECTION('',(0.,-1.));+#18180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18181 = PCURVE('',#18182,#18189);+#18182 = SURFACE_OF_LINEAR_EXTRUSION('',#18183,#18187);+#18183 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18184,#18185,#18186),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18184 = CARTESIAN_POINT('',(-8.272289344416E-02,2.820456747906E-02,+ 1.7450001));+#18185 = CARTESIAN_POINT('',(-0.106988275521,2.237457308394E-02,+ 1.7450001));+#18186 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,+ 1.7450001));+#18187 = VECTOR('',#18188,1.);+#18188 = DIRECTION('',(0.,0.,1.));+#18189 = DEFINITIONAL_REPRESENTATION('',(#18190),#18194);+#18190 = LINE('',#18191,#18192);+#18191 = CARTESIAN_POINT('',(1.,0.));+#18192 = VECTOR('',#18193,1.);+#18193 = DIRECTION('',(0.,-1.));+#18194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18195 = ORIENTED_EDGE('',*,*,#18196,.T.);+#18196 = EDGE_CURVE('',#18162,#18197,#18199,.T.);+#18197 = VERTEX_POINT('',#18198);+#18198 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.7050001));+#18199 = SURFACE_CURVE('',#18200,(#18204,#18211),.PCURVE_S1.);+#18200 = LINE('',#18201,#18202);+#18201 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,+ 1.7050001));+#18202 = VECTOR('',#18203,1.);+#18203 = DIRECTION('',(0.,1.,0.));+#18204 = PCURVE('',#18170,#18205);+#18205 = DEFINITIONAL_REPRESENTATION('',(#18206),#18210);+#18206 = LINE('',#18207,#18208);+#18207 = CARTESIAN_POINT('',(0.,-4.E-02));+#18208 = VECTOR('',#18209,1.);+#18209 = DIRECTION('',(1.,0.));+#18210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18211 = PCURVE('',#18212,#18217);+#18212 = PLANE('',#18213);+#18213 = AXIS2_PLACEMENT_3D('',#18214,#18215,#18216);+#18214 = CARTESIAN_POINT('',(-0.194280624032,-0.223430596007,1.7050001)+ );+#18215 = DIRECTION('',(0.,0.,1.));+#18216 = DIRECTION('',(1.,0.,0.));+#18217 = DEFINITIONAL_REPRESENTATION('',(#18218),#18222);+#18218 = LINE('',#18219,#18220);+#18219 = CARTESIAN_POINT('',(6.523291025882E-02,0.234145180301));+#18220 = VECTOR('',#18221,1.);+#18221 = DIRECTION('',(0.,1.));+#18222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18223 = ORIENTED_EDGE('',*,*,#18224,.F.);+#18224 = EDGE_CURVE('',#18225,#18197,#18227,.T.);+#18225 = VERTEX_POINT('',#18226);+#18226 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.7450001));+#18227 = SURFACE_CURVE('',#18228,(#18232,#18239),.PCURVE_S1.);+#18228 = LINE('',#18229,#18230);+#18229 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.7450001));+#18230 = VECTOR('',#18231,1.);+#18231 = DIRECTION('',(-0.,-0.,-1.));+#18232 = PCURVE('',#18170,#18233);+#18233 = DEFINITIONAL_REPRESENTATION('',(#18234),#18238);+#18234 = LINE('',#18235,#18236);+#18235 = CARTESIAN_POINT('',(0.236351124126,0.));+#18236 = VECTOR('',#18237,1.);+#18237 = DIRECTION('',(0.,-1.));+#18238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18239 = PCURVE('',#18240,#18245);+#18240 = PLANE('',#18241);+#18241 = AXIS2_PLACEMENT_3D('',#18242,#18243,#18244);+#18242 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.7450001));+#18243 = DIRECTION('',(0.,-1.,0.));+#18244 = DIRECTION('',(1.,0.,0.));+#18245 = DEFINITIONAL_REPRESENTATION('',(#18246),#18250);+#18246 = LINE('',#18247,#18248);+#18247 = CARTESIAN_POINT('',(0.,0.));+#18248 = VECTOR('',#18249,1.);+#18249 = DIRECTION('',(0.,-1.));+#18250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18251 = ORIENTED_EDGE('',*,*,#18252,.F.);+#18252 = EDGE_CURVE('',#18160,#18225,#18253,.T.);+#18253 = SURFACE_CURVE('',#18254,(#18258,#18265),.PCURVE_S1.);+#18254 = LINE('',#18255,#18256);+#18255 = CARTESIAN_POINT('',(-0.129047713773,1.071458429372E-02,+ 1.7450001));+#18256 = VECTOR('',#18257,1.);+#18257 = DIRECTION('',(0.,1.,0.));+#18258 = PCURVE('',#18170,#18259);+#18259 = DEFINITIONAL_REPRESENTATION('',(#18260),#18264);+#18260 = LINE('',#18261,#18262);+#18261 = CARTESIAN_POINT('',(0.,0.));+#18262 = VECTOR('',#18263,1.);+#18263 = DIRECTION('',(1.,0.));+#18264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18265 = PCURVE('',#18266,#18271);+#18266 = PLANE('',#18267);+#18267 = AXIS2_PLACEMENT_3D('',#18268,#18269,#18270);+#18268 = CARTESIAN_POINT('',(-0.194280624032,-0.223430596007,1.7450001)+ );+#18269 = DIRECTION('',(0.,0.,1.));+#18270 = DIRECTION('',(1.,0.,0.));+#18271 = DEFINITIONAL_REPRESENTATION('',(#18272),#18276);+#18272 = LINE('',#18273,#18274);+#18273 = CARTESIAN_POINT('',(6.523291025882E-02,0.234145180301));+#18274 = VECTOR('',#18275,1.);+#18275 = DIRECTION('',(0.,1.));+#18276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18277 = ADVANCED_FACE('',(#18278),#18240,.F.);+#18278 = FACE_BOUND('',#18279,.F.);+#18279 = EDGE_LOOP('',(#18280,#18281,#18304,#18332));+#18280 = ORIENTED_EDGE('',*,*,#18224,.T.);+#18281 = ORIENTED_EDGE('',*,*,#18282,.T.);+#18282 = EDGE_CURVE('',#18197,#18283,#18285,.T.);+#18283 = VERTEX_POINT('',#18284);+#18284 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.7050001));+#18285 = SURFACE_CURVE('',#18286,(#18290,#18297),.PCURVE_S1.);+#18286 = LINE('',#18287,#18288);+#18287 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.7050001));+#18288 = VECTOR('',#18289,1.);+#18289 = DIRECTION('',(1.,0.,0.));+#18290 = PCURVE('',#18240,#18291);+#18291 = DEFINITIONAL_REPRESENTATION('',(#18292),#18296);+#18292 = LINE('',#18293,#18294);+#18293 = CARTESIAN_POINT('',(0.,-4.E-02));+#18294 = VECTOR('',#18295,1.);+#18295 = DIRECTION('',(1.,0.));+#18296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18297 = PCURVE('',#18212,#18298);+#18298 = DEFINITIONAL_REPRESENTATION('',(#18299),#18303);+#18299 = LINE('',#18300,#18301);+#18300 = CARTESIAN_POINT('',(6.523291025882E-02,0.470496304427));+#18301 = VECTOR('',#18302,1.);+#18302 = DIRECTION('',(1.,0.));+#18303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18304 = ORIENTED_EDGE('',*,*,#18305,.F.);+#18305 = EDGE_CURVE('',#18306,#18283,#18308,.T.);+#18306 = VERTEX_POINT('',#18307);+#18307 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.7450001));+#18308 = SURFACE_CURVE('',#18309,(#18313,#18320),.PCURVE_S1.);+#18309 = LINE('',#18310,#18311);+#18310 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.7450001));+#18311 = VECTOR('',#18312,1.);+#18312 = DIRECTION('',(-0.,-0.,-1.));+#18313 = PCURVE('',#18240,#18314);+#18314 = DEFINITIONAL_REPRESENTATION('',(#18315),#18319);+#18315 = LINE('',#18316,#18317);+#18316 = CARTESIAN_POINT('',(0.238241933119,0.));+#18317 = VECTOR('',#18318,1.);+#18318 = DIRECTION('',(0.,-1.));+#18319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18320 = PCURVE('',#18321,#18326);+#18321 = PLANE('',#18322);+#18322 = AXIS2_PLACEMENT_3D('',#18323,#18324,#18325);+#18323 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.7450001));+#18324 = DIRECTION('',(-1.,0.,0.));+#18325 = DIRECTION('',(0.,-1.,0.));+#18326 = DEFINITIONAL_REPRESENTATION('',(#18327),#18331);+#18327 = LINE('',#18328,#18329);+#18328 = CARTESIAN_POINT('',(0.,0.));+#18329 = VECTOR('',#18330,1.);+#18330 = DIRECTION('',(0.,-1.));+#18331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18332 = ORIENTED_EDGE('',*,*,#18333,.F.);+#18333 = EDGE_CURVE('',#18225,#18306,#18334,.T.);+#18334 = SURFACE_CURVE('',#18335,(#18339,#18346),.PCURVE_S1.);+#18335 = LINE('',#18336,#18337);+#18336 = CARTESIAN_POINT('',(-0.129047713773,0.24706570842,1.7450001));+#18337 = VECTOR('',#18338,1.);+#18338 = DIRECTION('',(1.,0.,0.));+#18339 = PCURVE('',#18240,#18340);+#18340 = DEFINITIONAL_REPRESENTATION('',(#18341),#18345);+#18341 = LINE('',#18342,#18343);+#18342 = CARTESIAN_POINT('',(0.,0.));+#18343 = VECTOR('',#18344,1.);+#18344 = DIRECTION('',(1.,0.));+#18345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18346 = PCURVE('',#18266,#18347);+#18347 = DEFINITIONAL_REPRESENTATION('',(#18348),#18352);+#18348 = LINE('',#18349,#18350);+#18349 = CARTESIAN_POINT('',(6.523291025882E-02,0.470496304427));+#18350 = VECTOR('',#18351,1.);+#18351 = DIRECTION('',(1.,0.));+#18352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18353 = ADVANCED_FACE('',(#18354),#18321,.F.);+#18354 = FACE_BOUND('',#18355,.F.);+#18355 = EDGE_LOOP('',(#18356,#18357,#18380,#18408));+#18356 = ORIENTED_EDGE('',*,*,#18305,.T.);+#18357 = ORIENTED_EDGE('',*,*,#18358,.T.);+#18358 = EDGE_CURVE('',#18283,#18359,#18361,.T.);+#18359 = VERTEX_POINT('',#18360);+#18360 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.7050001));+#18361 = SURFACE_CURVE('',#18362,(#18366,#18373),.PCURVE_S1.);+#18362 = LINE('',#18363,#18364);+#18363 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.7050001));+#18364 = VECTOR('',#18365,1.);+#18365 = DIRECTION('',(0.,-1.,0.));+#18366 = PCURVE('',#18321,#18367);+#18367 = DEFINITIONAL_REPRESENTATION('',(#18368),#18372);+#18368 = LINE('',#18369,#18370);+#18369 = CARTESIAN_POINT('',(0.,-4.E-02));+#18370 = VECTOR('',#18371,1.);+#18371 = DIRECTION('',(1.,0.));+#18372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18373 = PCURVE('',#18212,#18374);+#18374 = DEFINITIONAL_REPRESENTATION('',(#18375),#18379);+#18375 = LINE('',#18376,#18377);+#18376 = CARTESIAN_POINT('',(0.303474843378,0.470496304427));+#18377 = VECTOR('',#18378,1.);+#18378 = DIRECTION('',(0.,-1.));+#18379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18380 = ORIENTED_EDGE('',*,*,#18381,.F.);+#18381 = EDGE_CURVE('',#18382,#18359,#18384,.T.);+#18382 = VERTEX_POINT('',#18383);+#18383 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.7450001));+#18384 = SURFACE_CURVE('',#18385,(#18389,#18396),.PCURVE_S1.);+#18385 = LINE('',#18386,#18387);+#18386 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.7450001));+#18387 = VECTOR('',#18388,1.);+#18388 = DIRECTION('',(-0.,-0.,-1.));+#18389 = PCURVE('',#18321,#18390);+#18390 = DEFINITIONAL_REPRESENTATION('',(#18391),#18395);+#18391 = LINE('',#18392,#18393);+#18392 = CARTESIAN_POINT('',(5.35729214686E-02,0.));+#18393 = VECTOR('',#18394,1.);+#18394 = DIRECTION('',(0.,-1.));+#18395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18396 = PCURVE('',#18397,#18402);+#18397 = PLANE('',#18398);+#18398 = AXIS2_PLACEMENT_3D('',#18399,#18400,#18401);+#18399 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.7450001));+#18400 = DIRECTION('',(0.,1.,0.));+#18401 = DIRECTION('',(-1.,0.,0.));+#18402 = DEFINITIONAL_REPRESENTATION('',(#18403),#18407);+#18403 = LINE('',#18404,#18405);+#18404 = CARTESIAN_POINT('',(0.,0.));+#18405 = VECTOR('',#18406,1.);+#18406 = DIRECTION('',(0.,-1.));+#18407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18408 = ORIENTED_EDGE('',*,*,#18409,.F.);+#18409 = EDGE_CURVE('',#18306,#18382,#18410,.T.);+#18410 = SURFACE_CURVE('',#18411,(#18415,#18422),.PCURVE_S1.);+#18411 = LINE('',#18412,#18413);+#18412 = CARTESIAN_POINT('',(0.109194219346,0.24706570842,1.7450001));+#18413 = VECTOR('',#18414,1.);+#18414 = DIRECTION('',(0.,-1.,0.));+#18415 = PCURVE('',#18321,#18416);+#18416 = DEFINITIONAL_REPRESENTATION('',(#18417),#18421);+#18417 = LINE('',#18418,#18419);+#18418 = CARTESIAN_POINT('',(0.,0.));+#18419 = VECTOR('',#18420,1.);+#18420 = DIRECTION('',(1.,0.));+#18421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18422 = PCURVE('',#18266,#18423);+#18423 = DEFINITIONAL_REPRESENTATION('',(#18424),#18428);+#18424 = LINE('',#18425,#18426);+#18425 = CARTESIAN_POINT('',(0.303474843378,0.470496304427));+#18426 = VECTOR('',#18427,1.);+#18427 = DIRECTION('',(0.,-1.));+#18428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18429 = ADVANCED_FACE('',(#18430),#18397,.F.);+#18430 = FACE_BOUND('',#18431,.F.);+#18431 = EDGE_LOOP('',(#18432,#18433,#18456,#18484));+#18432 = ORIENTED_EDGE('',*,*,#18381,.T.);+#18433 = ORIENTED_EDGE('',*,*,#18434,.T.);+#18434 = EDGE_CURVE('',#18359,#18435,#18437,.T.);+#18435 = VERTEX_POINT('',#18436);+#18436 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,+ 1.7050001));+#18437 = SURFACE_CURVE('',#18438,(#18442,#18449),.PCURVE_S1.);+#18438 = LINE('',#18439,#18440);+#18439 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.7050001));+#18440 = VECTOR('',#18441,1.);+#18441 = DIRECTION('',(-1.,0.,0.));+#18442 = PCURVE('',#18397,#18443);+#18443 = DEFINITIONAL_REPRESENTATION('',(#18444),#18448);+#18444 = LINE('',#18445,#18446);+#18445 = CARTESIAN_POINT('',(0.,-4.E-02));+#18446 = VECTOR('',#18447,1.);+#18447 = DIRECTION('',(1.,0.));+#18448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18449 = PCURVE('',#18212,#18450);+#18450 = DEFINITIONAL_REPRESENTATION('',(#18451),#18455);+#18451 = LINE('',#18452,#18453);+#18452 = CARTESIAN_POINT('',(0.303474843378,0.416923382959));+#18453 = VECTOR('',#18454,1.);+#18454 = DIRECTION('',(-1.,0.));+#18455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18456 = ORIENTED_EDGE('',*,*,#18457,.F.);+#18457 = EDGE_CURVE('',#18458,#18435,#18460,.T.);+#18458 = VERTEX_POINT('',#18459);+#18459 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,+ 1.7450001));+#18460 = SURFACE_CURVE('',#18461,(#18465,#18472),.PCURVE_S1.);+#18461 = LINE('',#18462,#18463);+#18462 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,+ 1.7450001));+#18463 = VECTOR('',#18464,1.);+#18464 = DIRECTION('',(-0.,-0.,-1.));+#18465 = PCURVE('',#18397,#18466);+#18466 = DEFINITIONAL_REPRESENTATION('',(#18467),#18471);+#18467 = LINE('',#18468,#18469);+#18468 = CARTESIAN_POINT('',(0.180257124,0.));+#18469 = VECTOR('',#18470,1.);+#18470 = DIRECTION('',(0.,-1.));+#18471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18472 = PCURVE('',#18473,#18478);+#18473 = PLANE('',#18474);+#18474 = AXIS2_PLACEMENT_3D('',#18475,#18476,#18477);+#18475 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,+ 1.7450001));+#18476 = DIRECTION('',(-1.,0.,0.));+#18477 = DIRECTION('',(0.,-1.,0.));+#18478 = DEFINITIONAL_REPRESENTATION('',(#18479),#18483);+#18479 = LINE('',#18480,#18481);+#18480 = CARTESIAN_POINT('',(0.,0.));+#18481 = VECTOR('',#18482,1.);+#18482 = DIRECTION('',(0.,-1.));+#18483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18484 = ORIENTED_EDGE('',*,*,#18485,.F.);+#18485 = EDGE_CURVE('',#18382,#18458,#18486,.T.);+#18486 = SURFACE_CURVE('',#18487,(#18491,#18498),.PCURVE_S1.);+#18487 = LINE('',#18488,#18489);+#18488 = CARTESIAN_POINT('',(0.109194219346,0.193492786951,1.7450001));+#18489 = VECTOR('',#18490,1.);+#18490 = DIRECTION('',(-1.,0.,0.));+#18491 = PCURVE('',#18397,#18492);+#18492 = DEFINITIONAL_REPRESENTATION('',(#18493),#18497);+#18493 = LINE('',#18494,#18495);+#18494 = CARTESIAN_POINT('',(0.,0.));+#18495 = VECTOR('',#18496,1.);+#18496 = DIRECTION('',(1.,0.));+#18497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18498 = PCURVE('',#18266,#18499);+#18499 = DEFINITIONAL_REPRESENTATION('',(#18500),#18504);+#18500 = LINE('',#18501,#18502);+#18501 = CARTESIAN_POINT('',(0.303474843378,0.416923382959));+#18502 = VECTOR('',#18503,1.);+#18503 = DIRECTION('',(-1.,0.));+#18504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18505 = ADVANCED_FACE('',(#18506),#18473,.F.);+#18506 = FACE_BOUND('',#18507,.F.);+#18507 = EDGE_LOOP('',(#18508,#18509,#18532,#18562));+#18508 = ORIENTED_EDGE('',*,*,#18457,.T.);+#18509 = ORIENTED_EDGE('',*,*,#18510,.T.);+#18510 = EDGE_CURVE('',#18435,#18511,#18513,.T.);+#18511 = VERTEX_POINT('',#18512);+#18512 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.7050001));+#18513 = SURFACE_CURVE('',#18514,(#18518,#18525),.PCURVE_S1.);+#18514 = LINE('',#18515,#18516);+#18515 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,+ 1.7050001));+#18516 = VECTOR('',#18517,1.);+#18517 = DIRECTION('',(0.,-1.,0.));+#18518 = PCURVE('',#18473,#18519);+#18519 = DEFINITIONAL_REPRESENTATION('',(#18520),#18524);+#18520 = LINE('',#18521,#18522);+#18521 = CARTESIAN_POINT('',(0.,-4.E-02));+#18522 = VECTOR('',#18523,1.);+#18523 = DIRECTION('',(1.,0.));+#18524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18525 = PCURVE('',#18212,#18526);+#18526 = DEFINITIONAL_REPRESENTATION('',(#18527),#18531);+#18527 = LINE('',#18528,#18529);+#18528 = CARTESIAN_POINT('',(0.123217719378,0.416923382959));+#18529 = VECTOR('',#18530,1.);+#18530 = DIRECTION('',(0.,-1.));+#18531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18532 = ORIENTED_EDGE('',*,*,#18533,.F.);+#18533 = EDGE_CURVE('',#18534,#18511,#18536,.T.);+#18534 = VERTEX_POINT('',#18535);+#18535 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.7450001));+#18536 = SURFACE_CURVE('',#18537,(#18541,#18548),.PCURVE_S1.);+#18537 = LINE('',#18538,#18539);+#18538 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.7450001));+#18539 = VECTOR('',#18540,1.);+#18540 = DIRECTION('',(-0.,-0.,-1.));+#18541 = PCURVE('',#18473,#18542);+#18542 = DEFINITIONAL_REPRESENTATION('',(#18543),#18547);+#18543 = LINE('',#18544,#18545);+#18544 = CARTESIAN_POINT('',(0.115654483406,0.));+#18545 = VECTOR('',#18546,1.);+#18546 = DIRECTION('',(0.,-1.));+#18547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18548 = PCURVE('',#18549,#18556);+#18549 = SURFACE_OF_LINEAR_EXTRUSION('',#18550,#18554);+#18550 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18551,#18552,#18553),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18551 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.7450001));+#18552 = CARTESIAN_POINT('',(-5.75121068707E-02,8.288046086024E-02,+ 1.7450001));+#18553 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7450001));+#18554 = VECTOR('',#18555,1.);+#18555 = DIRECTION('',(0.,0.,1.));+#18556 = DEFINITIONAL_REPRESENTATION('',(#18557),#18561);+#18557 = LINE('',#18558,#18559);+#18558 = CARTESIAN_POINT('',(0.,0.));+#18559 = VECTOR('',#18560,1.);+#18560 = DIRECTION('',(0.,-1.));+#18561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18562 = ORIENTED_EDGE('',*,*,#18563,.F.);+#18563 = EDGE_CURVE('',#18458,#18534,#18564,.T.);+#18564 = SURFACE_CURVE('',#18565,(#18569,#18576),.PCURVE_S1.);+#18565 = LINE('',#18566,#18567);+#18566 = CARTESIAN_POINT('',(-7.106290465393E-02,0.193492786951,+ 1.7450001));+#18567 = VECTOR('',#18568,1.);+#18568 = DIRECTION('',(0.,-1.,0.));+#18569 = PCURVE('',#18473,#18570);+#18570 = DEFINITIONAL_REPRESENTATION('',(#18571),#18575);+#18571 = LINE('',#18572,#18573);+#18572 = CARTESIAN_POINT('',(0.,0.));+#18573 = VECTOR('',#18574,1.);+#18574 = DIRECTION('',(1.,0.));+#18575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18576 = PCURVE('',#18266,#18577);+#18577 = DEFINITIONAL_REPRESENTATION('',(#18578),#18582);+#18578 = LINE('',#18579,#18580);+#18579 = CARTESIAN_POINT('',(0.123217719378,0.416923382959));+#18580 = VECTOR('',#18581,1.);+#18581 = DIRECTION('',(0.,-1.));+#18582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18583 = ADVANCED_FACE('',(#18584),#18549,.F.);+#18584 = FACE_BOUND('',#18585,.F.);+#18585 = EDGE_LOOP('',(#18586,#18587,#18610,#18640));+#18586 = ORIENTED_EDGE('',*,*,#18533,.T.);+#18587 = ORIENTED_EDGE('',*,*,#18588,.T.);+#18588 = EDGE_CURVE('',#18511,#18589,#18591,.T.);+#18589 = VERTEX_POINT('',#18590);+#18590 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7050001));+#18591 = SURFACE_CURVE('',#18592,(#18596,#18603),.PCURVE_S1.);+#18592 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18593,#18594,#18595),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18593 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.7050001));+#18594 = CARTESIAN_POINT('',(-5.75121068707E-02,8.288046086024E-02,+ 1.7050001));+#18595 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7050001));+#18596 = PCURVE('',#18549,#18597);+#18597 = DEFINITIONAL_REPRESENTATION('',(#18598),#18602);+#18598 = LINE('',#18599,#18600);+#18599 = CARTESIAN_POINT('',(0.,-4.E-02));+#18600 = VECTOR('',#18601,1.);+#18601 = DIRECTION('',(1.,0.));+#18602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18603 = PCURVE('',#18212,#18604);+#18604 = DEFINITIONAL_REPRESENTATION('',(#18605),#18609);+#18605 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18606,#18607,#18608),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18606 = CARTESIAN_POINT('',(0.123217719378,0.301268899553));+#18607 = CARTESIAN_POINT('',(0.136768517161,0.306311056868));+#18608 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#18609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18610 = ORIENTED_EDGE('',*,*,#18611,.F.);+#18611 = EDGE_CURVE('',#18612,#18589,#18614,.T.);+#18612 = VERTEX_POINT('',#18613);+#18613 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7450001));+#18614 = SURFACE_CURVE('',#18615,(#18619,#18626),.PCURVE_S1.);+#18615 = LINE('',#18616,#18617);+#18616 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7450001));+#18617 = VECTOR('',#18618,1.);+#18618 = DIRECTION('',(-0.,-0.,-1.));+#18619 = PCURVE('',#18549,#18620);+#18620 = DEFINITIONAL_REPRESENTATION('',(#18621),#18625);+#18621 = LINE('',#18622,#18623);+#18622 = CARTESIAN_POINT('',(1.,0.));+#18623 = VECTOR('',#18624,1.);+#18624 = DIRECTION('',(0.,-1.));+#18625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18626 = PCURVE('',#18627,#18634);+#18627 = SURFACE_OF_LINEAR_EXTRUSION('',#18628,#18632);+#18628 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18629,#18630,#18631),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18629 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7450001));+#18630 = CARTESIAN_POINT('',(-3.009537647206E-02,8.760748334276E-02,+ 1.7450001));+#18631 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7450001));+#18632 = VECTOR('',#18633,1.);+#18633 = DIRECTION('',(0.,0.,1.));+#18634 = DEFINITIONAL_REPRESENTATION('',(#18635),#18639);+#18635 = LINE('',#18636,#18637);+#18636 = CARTESIAN_POINT('',(0.,0.));+#18637 = VECTOR('',#18638,1.);+#18638 = DIRECTION('',(0.,-1.));+#18639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18640 = ORIENTED_EDGE('',*,*,#18641,.F.);+#18641 = EDGE_CURVE('',#18534,#18612,#18642,.T.);+#18642 = SURFACE_CURVE('',#18643,(#18647,#18654),.PCURVE_S1.);+#18643 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18644,#18645,#18646),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18644 = CARTESIAN_POINT('',(-7.106290465393E-02,7.783830354555E-02,+ 1.7450001));+#18645 = CARTESIAN_POINT('',(-5.75121068707E-02,8.288046086024E-02,+ 1.7450001));+#18646 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7450001));+#18647 = PCURVE('',#18549,#18648);+#18648 = DEFINITIONAL_REPRESENTATION('',(#18649),#18653);+#18649 = LINE('',#18650,#18651);+#18650 = CARTESIAN_POINT('',(0.,0.));+#18651 = VECTOR('',#18652,1.);+#18652 = DIRECTION('',(1.,0.));+#18653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18654 = PCURVE('',#18266,#18655);+#18655 = DEFINITIONAL_REPRESENTATION('',(#18656),#18660);+#18656 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18657,#18658,#18659),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18657 = CARTESIAN_POINT('',(0.123217719378,0.301268899553));+#18658 = CARTESIAN_POINT('',(0.136768517161,0.306311056868));+#18659 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#18660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18661 = ADVANCED_FACE('',(#18662),#18627,.F.);+#18662 = FACE_BOUND('',#18663,.F.);+#18663 = EDGE_LOOP('',(#18664,#18665,#18688,#18718));+#18664 = ORIENTED_EDGE('',*,*,#18611,.T.);+#18665 = ORIENTED_EDGE('',*,*,#18666,.T.);+#18666 = EDGE_CURVE('',#18589,#18667,#18669,.T.);+#18667 = VERTEX_POINT('',#18668);+#18668 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7050001));+#18669 = SURFACE_CURVE('',#18670,(#18674,#18681),.PCURVE_S1.);+#18670 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18671,#18672,#18673),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18671 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7050001));+#18672 = CARTESIAN_POINT('',(-3.009537647206E-02,8.760748334276E-02,+ 1.7050001));+#18673 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7050001));+#18674 = PCURVE('',#18627,#18675);+#18675 = DEFINITIONAL_REPRESENTATION('',(#18676),#18680);+#18676 = LINE('',#18677,#18678);+#18677 = CARTESIAN_POINT('',(0.,-4.E-02));+#18678 = VECTOR('',#18679,1.);+#18679 = DIRECTION('',(1.,0.));+#18680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18681 = PCURVE('',#18212,#18682);+#18682 = DEFINITIONAL_REPRESENTATION('',(#18683),#18687);+#18683 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18684,#18685,#18686),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18684 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#18685 = CARTESIAN_POINT('',(0.16418524756,0.31103807935));+#18686 = CARTESIAN_POINT('',(0.178051180175,0.31103807935));+#18687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18688 = ORIENTED_EDGE('',*,*,#18689,.F.);+#18689 = EDGE_CURVE('',#18690,#18667,#18692,.T.);+#18690 = VERTEX_POINT('',#18691);+#18691 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7450001));+#18692 = SURFACE_CURVE('',#18693,(#18697,#18704),.PCURVE_S1.);+#18693 = LINE('',#18694,#18695);+#18694 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7450001));+#18695 = VECTOR('',#18696,1.);+#18696 = DIRECTION('',(-0.,-0.,-1.));+#18697 = PCURVE('',#18627,#18698);+#18698 = DEFINITIONAL_REPRESENTATION('',(#18699),#18703);+#18699 = LINE('',#18700,#18701);+#18700 = CARTESIAN_POINT('',(1.,0.));+#18701 = VECTOR('',#18702,1.);+#18702 = DIRECTION('',(0.,-1.));+#18703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18704 = PCURVE('',#18705,#18712);+#18705 = SURFACE_OF_LINEAR_EXTRUSION('',#18706,#18710);+#18706 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18707,#18708,#18709),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18707 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7450001));+#18708 = CARTESIAN_POINT('',(5.688183720636E-02,8.760748334276E-02,+ 1.7450001));+#18709 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,+ 1.7450001));+#18710 = VECTOR('',#18711,1.);+#18711 = DIRECTION('',(0.,0.,1.));+#18712 = DEFINITIONAL_REPRESENTATION('',(#18713),#18717);+#18713 = LINE('',#18714,#18715);+#18714 = CARTESIAN_POINT('',(0.,0.));+#18715 = VECTOR('',#18716,1.);+#18716 = DIRECTION('',(0.,-1.));+#18717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18718 = ORIENTED_EDGE('',*,*,#18719,.F.);+#18719 = EDGE_CURVE('',#18612,#18690,#18720,.T.);+#18720 = SURFACE_CURVE('',#18721,(#18725,#18732),.PCURVE_S1.);+#18721 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18722,#18723,#18724),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18722 = CARTESIAN_POINT('',(-4.380374167138E-02,8.52439721015E-02,+ 1.7450001));+#18723 = CARTESIAN_POINT('',(-3.009537647206E-02,8.760748334276E-02,+ 1.7450001));+#18724 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7450001));+#18725 = PCURVE('',#18627,#18726);+#18726 = DEFINITIONAL_REPRESENTATION('',(#18727),#18731);+#18727 = LINE('',#18728,#18729);+#18728 = CARTESIAN_POINT('',(0.,0.));+#18729 = VECTOR('',#18730,1.);+#18730 = DIRECTION('',(1.,0.));+#18731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18732 = PCURVE('',#18266,#18733);+#18733 = DEFINITIONAL_REPRESENTATION('',(#18734),#18738);+#18734 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18735,#18736,#18737),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18735 = CARTESIAN_POINT('',(0.15047688236,0.308674568109));+#18736 = CARTESIAN_POINT('',(0.16418524756,0.31103807935));+#18737 = CARTESIAN_POINT('',(0.178051180175,0.31103807935));+#18738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18739 = ADVANCED_FACE('',(#18740),#18705,.F.);+#18740 = FACE_BOUND('',#18741,.F.);+#18741 = EDGE_LOOP('',(#18742,#18743,#18766,#18796));+#18742 = ORIENTED_EDGE('',*,*,#18689,.T.);+#18743 = ORIENTED_EDGE('',*,*,#18744,.T.);+#18744 = EDGE_CURVE('',#18667,#18745,#18747,.T.);+#18745 = VERTEX_POINT('',#18746);+#18746 = CARTESIAN_POINT('',(9.974017438124E-02,4.443401133572E-02,+ 1.7050001));+#18747 = SURFACE_CURVE('',#18748,(#18752,#18759),.PCURVE_S1.);+#18748 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#18749,#18750,#18751),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18749 = CARTESIAN_POINT('',(-1.622944385666E-02,8.760748334276E-02,+ 1.7050001));+#18750 = CARTESIAN_POINT('',(5.688183720636E-02,8.760748334276E-02,+ 1.7050001));