component
XL232Z
Public Made by Adomby adom
XINLUDA RS232 ICs, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+18−15@@ -32,13 +32,13 @@ "number": "1", "name": "C1+", "type": "passive",- "description": "Positive lead of the C1 flying capacitor for the +5V-to-+10V charge-pump voltage doubler. Connect a 1\u00b5F/16V capacitor between C1+ and C1-."+ "description": "Positive lead of the C1 flying capacitor for the +5V-to-+10V charge-pump voltage doubler. Connect a 1µF/16V capacitor between C1+ and C1-." }, { "number": "2", "name": "V+", "type": "power_out",- "description": "Positive charge-pump output (~+10V) for the storage capacitor only. Bypass to GND with a 1\u00b5F/16V capacitor (C3). Do not use to power external circuitry beyond mA-level loads."+ "description": "Positive charge-pump output (~+10V) for the storage capacitor only. Bypass to GND with a 1µF/16V capacitor (C3). Do not use to power external circuitry beyond mA-level loads." }, { "number": "3",@@ -50,67 +50,67 @@ "number": "4", "name": "C2+", "type": "passive",- "description": "Positive lead of the C2 flying capacitor for the +10V-to-\u221210V charge-pump voltage inverter. Connect a 1\u00b5F/16V capacitor between C2+ and C2-."+ "description": "Positive lead of the C2 flying capacitor for the +10V-to-−10V charge-pump voltage inverter. Connect a 1µF/16V capacitor between C2+ and C2-." }, { "number": "5", "name": "C2-", "type": "passive",- "description": "Negative lead of the C2 flying capacitor for the +10V-to-\u221210V charge-pump voltage inverter."+ "description": "Negative lead of the C2 flying capacitor for the +10V-to-−10V charge-pump voltage inverter." }, { "number": "6", "name": "V-", "type": "power_out",- "description": "Negative charge-pump output (~\u221210V) for the storage capacitor only. Bypass to GND with a 1\u00b5F/16V capacitor (C4). Not regulated; do not load beyond mA-level."+ "description": "Negative charge-pump output (~−10V) for the storage capacitor only. Bypass to GND with a 1µF/16V capacitor (C4). Not regulated; do not load beyond mA-level." }, { "number": "7", "name": "T2OUT", "type": "output",- "description": "RS-232 line data output of driver 2, sent to the remote RS-232 system. Typical swing \u00b18V into a 5k\u03a9 receiver, guaranteed \u00b15V minimum into 3k\u03a9 at VCC=+4.5V."+ "description": "RS-232 line data output of driver 2, sent to the remote RS-232 system. Typical swing ±8V into a 5kΩ receiver, guaranteed ±5V minimum into 3kΩ at VCC=+4.5V." }, { "number": "8", "name": "R2IN", "type": "input",- "description": "RS-232 line data input of receiver 2, driven by the remote RS-232 system. Withstands \u00b125V input; internal 5k\u03a9 (typ) input termination resistor to GND."+ "description": "RS-232 line data input of receiver 2, driven by the remote RS-232 system. Withstands ±25V input; internal 5kΩ (typ) input termination resistor to GND." }, { "number": "9", "name": "R2OUT", "type": "output",- "description": "TTL/CMOS logic data output of receiver 2, driven to the local UART. VOH \u2265 3.5V at IOUT=\u22121mA; VOL \u2264 0.4V at IOUT=1.6mA."+ "description": "TTL/CMOS logic data output of receiver 2, driven to the local UART. VOH ≥ 3.5V at IOUT=−1mA; VOL ≤ 0.4V at IOUT=1.6mA." }, { "number": "10", "name": "T2IN", "type": "input",- "description": "TTL/CMOS logic data input of driver 2 from the local UART. Internal 400k\u03a9 pull-up to VCC; may be left unconnected on unused drivers."+ "description": "TTL/CMOS logic data input of driver 2 from the local UART. Internal 400kΩ pull-up to VCC; may be left unconnected on unused drivers." }, { "number": "11", "name": "T1IN", "type": "input",- "description": "TTL/CMOS logic data input of driver 1 from the local UART. Internal 400k\u03a9 pull-up to VCC; may be left unconnected on unused drivers."+ "description": "TTL/CMOS logic data input of driver 1 from the local UART. Internal 400kΩ pull-up to VCC; may be left unconnected on unused drivers." }, { "number": "12", "name": "R1OUT", "type": "output",- "description": "TTL/CMOS logic data output of receiver 1, driven to the local UART. VOH \u2265 3.5V at IOUT=\u22121mA; VOL \u2264 0.4V at IOUT=1.6mA."+ "description": "TTL/CMOS logic data output of receiver 1, driven to the local UART. VOH ≥ 3.5V at IOUT=−1mA; VOL ≤ 0.4V at IOUT=1.6mA." }, { "number": "13", "name": "R1IN", "type": "input",- "description": "RS-232 line data input of receiver 1, driven by the remote RS-232 system. Withstands \u00b125V input; internal 5k\u03a9 (typ) input termination resistor to GND."+ "description": "RS-232 line data input of receiver 1, driven by the remote RS-232 system. Withstands ±25V input; internal 5kΩ (typ) input termination resistor to GND." }, { "number": "14", "name": "T1OUT", "type": "output",- "description": "RS-232 line data output of driver 1, sent to the remote RS-232 system. Typical swing \u00b18V into a 5k\u03a9 receiver, guaranteed \u00b15V minimum into 3k\u03a9 at VCC=+4.5V."+ "description": "RS-232 line data output of driver 1, sent to the remote RS-232 system. Typical swing ±8V into a 5kΩ receiver, guaranteed ±5V minimum into 3kΩ at VCC=+4.5V." }, { "number": "15",@@ -122,7 +122,7 @@ "number": "16", "name": "VCC", "type": "power_in",- "description": "Supply voltage input; connect to external +5V (+5V \u00b15% operating; absolute maximum +6V). Decouple to GND with a capacitor equal to C1/C2 (1\u00b5F) placed as close to the device as possible."+ "description": "Supply voltage input; connect to external +5V (+5V ±5% operating; absolute maximum +6V). Decouple to GND with a capacitor equal to C1/C2 (1µF) placed as close to the device as possible." } ], "provenance": {@@ -186,5 +186,8 @@ "docs/xl232z-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }