XL1050

@@ -26,13 +26,15 @@       "model_3d_step": "xl1050.step",       "lbr": "xl1050.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C609746"+    },     "pins": [       {         "number": "1",         "name": "TXD",         "type": "input",-        "description": "Transmit data input from the CAN controller. Logic low drives the bus to the dominant state; logic high (or floating) leaves the bus in the recessive state. VIH min 2 V, VIL max 0.8 V. A built-in dominant time-out disables the driver if TXD is held low longer than tdom (300-700 µs)."+        "description": "Transmit data input from the CAN controller. Logic low drives the bus to the dominant state; logic high (or floating) leaves the bus in the recessive state. VIH min 2 V, VIL max 0.8 V. A built-in dominant time-out disables the driver if TXD is held low longer than tdom (300-700 \u00b5s)."       },       {         "number": "2",@@ -50,25 +52,25 @@         "number": "4",         "name": "RXD",         "type": "output",-        "description": "Receive data output to the CAN controller; reports the bus state. Low = dominant, High = recessive. Push-pull CMOS output (VOH ≥ 4 V at IO = -2 mA, VOL ≤ 0.4 V at IO = 2 mA)."+        "description": "Receive data output to the CAN controller; reports the bus state. Low = dominant, High = recessive. Push-pull CMOS output (VOH \u2265 4 V at IO = -2 mA, VOL \u2264 0.4 V at IO = 2 mA)."       },       {         "number": "5",         "name": "Vref",         "type": "output",-        "description": "Reference voltage output, nominally 0.5·VCC (0.4·VCC to 0.6·VCC) for |IREF| ≤ 50 µA. Used as a bias reference for the CAN controller receiver."+        "description": "Reference voltage output, nominally 0.5\u00b7VCC (0.4\u00b7VCC to 0.6\u00b7VCC) for |IREF| \u2264 50 \u00b5A. Used as a bias reference for the CAN controller receiver."       },       {         "number": "6",         "name": "CANL",         "type": "bidirectional",-        "description": "Low-level CAN bus line. Driven low (~1.5 V) in dominant state, biased to ~0.5·VCC in recessive state. Bus-side absolute rating -60 V to +60 V; protected against automotive transients (±200 V)."+        "description": "Low-level CAN bus line. Driven low (~1.5 V) in dominant state, biased to ~0.5\u00b7VCC in recessive state. Bus-side absolute rating -60 V to +60 V; protected against automotive transients (\u00b1200 V)."       },       {         "number": "7",         "name": "CANH",         "type": "bidirectional",-        "description": "High-level CAN bus line. Driven high (~3.5 V) in dominant state, biased to ~0.5·VCC in recessive state. Bus-side absolute rating -60 V to +60 V; protected against automotive transients (±200 V)."+        "description": "High-level CAN bus line. Driven high (~3.5 V) in dominant state, biased to ~0.5\u00b7VCC in recessive state. Bus-side absolute rating -60 V to +60 V; protected against automotive transients (\u00b1200 V)."       },       {         "number": "8",

@@ -62,6 +62,18 @@   <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.6000" y="2.4700"/>+    <vertex x="-2.8400" y="2.8000"/>+    <vertex x="-2.3600" y="2.8000"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.9750" y="2.4500"/>+    <vertex x="1.9500" y="2.4500"/>+    <vertex x="1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="1.4750"/>+  </polygon>   <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@   <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>   <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="XL1050">@@ -108,7 +120,13 @@         <connect gate="G$1" pin="CANL" pad="6"/>         <connect gate="G$1" pin="Vref" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="XL1050" constant="no"/>+          <attribute name="MANUFACTURER" value="XINLUDA" constant="no"/>+          <attribute name="LCSC_PN" value="C609746" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>