component
XL07Z
Public Made by Adomby adom
XINLUDA Precision OpAmps, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C521179). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+34−14
page.json+10−8@@ -26,31 +26,33 @@ "model_3d_step": "xl07z.step", "lbr": "xl07z.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C521179"+ }, "pins": [ { "number": "1", "name": "OFFSET N1", "type": "input",- "description": "External input offset voltage adjustment (null) pin. Connect a potentiometer (typically 20 kΩ) between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with wiper to V+ to trim residual input offset voltage. Offset adjustment range is typically ±4 mV with a 20 kΩ pot."+ "description": "External input offset voltage adjustment (null) pin. Connect a potentiometer (typically 20 k\u03a9) between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with wiper to V+ to trim residual input offset voltage. Offset adjustment range is typically \u00b14 mV with a 20 k\u03a9 pot." }, { "number": "2", "name": "IN-", "type": "input",- "description": "Inverting analog input of the op-amp. High input impedance (typ 33 MΩ), low input bias current (typ ±12 nA). Must stay within the common-mode input voltage range (typ ±13 V at ±15 V supply)."+ "description": "Inverting analog input of the op-amp. High input impedance (typ 33 M\u03a9), low input bias current (typ \u00b112 nA). Must stay within the common-mode input voltage range (typ \u00b113 V at \u00b115 V supply)." }, { "number": "3", "name": "IN+", "type": "input",- "description": "Noninverting analog input of the op-amp. High input impedance (typ 33 MΩ), low input bias current (typ ±12 nA). Must stay within the common-mode input voltage range (typ ±13 V at ±15 V supply)."+ "description": "Noninverting analog input of the op-amp. High input impedance (typ 33 M\u03a9), low input bias current (typ \u00b112 nA). Must stay within the common-mode input voltage range (typ \u00b113 V at \u00b115 V supply)." }, { "number": "4", "name": "V-", "type": "power_in",- "description": "Negative supply rail. Total supply span (V+ to V-) is 6 V to 36 V (single supply) or ±3 V to ±18 V (dual supply); absolute maximum ±20 V. Bypass with a 0.1 µF ceramic capacitor to ground close to the pin."+ "description": "Negative supply rail. Total supply span (V+ to V-) is 6 V to 36 V (single supply) or \u00b13 V to \u00b118 V (dual supply); absolute maximum \u00b120 V. Bypass with a 0.1 \u00b5F ceramic capacitor to ground close to the pin." }, { "number": "5",@@ -62,19 +64,19 @@ "number": "6", "name": "OUT", "type": "output",- "description": "Op-amp output. Typical output voltage swing ±12.8 V into RL = 2 kΩ at ±15 V supply. Slew rate 0.3 V/µs; unity-gain bandwidth 0.4-0.6 MHz. Output can be short-circuited continuously to ground or to V-."+ "description": "Op-amp output. Typical output voltage swing \u00b112.8 V into RL = 2 k\u03a9 at \u00b115 V supply. Slew rate 0.3 V/\u00b5s; unity-gain bandwidth 0.4-0.6 MHz. Output can be short-circuited continuously to ground or to V-." }, { "number": "7", "name": "V+", "type": "power_in",- "description": "Positive supply rail. Total supply span (V+ to V-) is 6 V to 36 V (single supply) or ±3 V to ±18 V (dual supply); absolute maximum ±20 V. Bypass with a 0.1 µF ceramic capacitor to ground close to the pin."+ "description": "Positive supply rail. Total supply span (V+ to V-) is 6 V to 36 V (single supply) or \u00b13 V to \u00b118 V (dual supply); absolute maximum \u00b120 V. Bypass with a 0.1 \u00b5F ceramic capacitor to ground close to the pin." }, { "number": "8", "name": "OFFSET N2", "type": "input",- "description": "External input offset voltage adjustment (null) pin. Connect a potentiometer (typically 20 kΩ) between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with wiper to V+ to trim residual input offset voltage."+ "description": "External input offset voltage adjustment (null) pin. Connect a potentiometer (typically 20 k\u03a9) between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with wiper to V+ to trim residual input offset voltage." } ], "provenance": {
xl07z.lbr+24−6@@ -62,6 +62,18 @@ <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/> <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/> <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.6000" y="2.4700"/>+ <vertex x="-2.8400" y="2.8000"/>+ <vertex x="-2.3600" y="2.8000"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.9750" y="2.4500"/>+ <vertex x="1.9500" y="2.4500"/>+ <vertex x="1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="1.4750"/>+ </polygon> <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/> <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/> <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@ <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/> <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="XL07Z">@@ -80,11 +92,11 @@ <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="5.08" width="0.254" layer="94"/> <text x="0" y="7.62" size="1.27" layer="95" align="bottom-center">>NAME</text> <text x="0" y="-10.16" size="1.27" layer="96" align="top-center">>VALUE</text>- <pin name="OFFSET N1" x="-17.78" y="2.54" length="middle" direction="in"/>+ <pin name="OFFSET_N1" x="-17.78" y="2.54" length="middle" direction="in"/> <pin name="IN-" x="-17.78" y="0" length="middle" direction="in"/> <pin name="IN+" x="-17.78" y="-2.54" length="middle" direction="in"/> <pin name="V-" x="-17.78" y="-5.08" length="middle" direction="pwr"/>- <pin name="OFFSET N2" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/>+ <pin name="OFFSET_N2" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/> <pin name="V+" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> <pin name="OUT" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/> <pin name="NC" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>@@ -99,16 +111,22 @@ <devices> <device name="" package="XL07Z"> <connects>- <connect gate="G$1" pin="OFFSET N1" pad="1"/>+ <connect gate="G$1" pin="OFFSET_N1" pad="1"/> <connect gate="G$1" pin="IN-" pad="2"/> <connect gate="G$1" pin="IN+" pad="3"/> <connect gate="G$1" pin="V-" pad="4"/>- <connect gate="G$1" pin="OFFSET N2" pad="8"/>+ <connect gate="G$1" pin="OFFSET_N2" pad="8"/> <connect gate="G$1" pin="V+" pad="7"/> <connect gate="G$1" pin="OUT" pad="6"/> <connect gate="G$1" pin="NC" pad="5"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="XL07Z" constant="no"/>+ <attribute name="MANUFACTURER" value="XINLUDA" constant="no"/>+ <attribute name="LCSC_PN" value="C521179" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>