wl2803e28-5

@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "WL2803E28-5",+    "manufacturer": "WILLSEMI Will Semicon",+    "package": "SOT-23-5L",+    "pin_count": 5,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "wl2803e28-5.kicad_sym",+      "footprint": "wl2803e28-5.kicad_mod",+      "model_3d": "wl2803e28-5-etched.glb",+      "model_3d_plain": "wl2803e28-5.glb",+      "model_3d_step": "wl2803e28-5-etched.step",+      "model_3d_step_plain": "wl2803e28-5.step",+      "lbr": "wl2803e28-5.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply pin, 2.5 V to 5.5 V operating range (absolute max -0.3 V to 6.5 V). Bypass to GND with a 4.7 µF ceramic capacitor placed close to the pin."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference for both the input supply and output regulation feedback path."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Active-high enable input. VENH ≥ 1.2 V turns the regulator on; VENL ≤ 0.4 V forces shutdown (ISHDN ≈ 0.1 µA typ). Do not leave floating."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND for mechanical strain relief."+      },+      {+        "number": "5",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated 2.8 V output (WL2803E28-5), up to 500 mA continuous with 130 mV typical dropout. Requires a 4.7 µF ceramic output capacitor (≥10 µF recommended when VOUT < 2 V)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}