component
WH251E-3
Public Made by Adomby adom
WILLSEMI Will Semicon Hall Sensor, TSOT-23-3L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+6−3@@ -32,13 +32,13 @@ "number": "1", "name": "VDD", "type": "power_in",- "description": "Positive supply input, 1.65 V to 5 V operating (6 V absolute max). A 100 \u03a9 series resistor is recommended for reverse-polarity protection; typical bypass is a 10 nF capacitor (C1) to GND per the application circuit."+ "description": "Positive supply input, 1.65 V to 5 V operating (6 V absolute max). A 100 Ω series resistor is recommended for reverse-polarity protection; typical bypass is a 10 nF capacitor (C1) to GND per the application circuit." }, { "number": "2", "name": "Output", "type": "output",- "description": "Totem-pole (push-pull) CMOS Hall switch output. Drives low when an operating-point magnetic flux (|B| > BOP, either N or S pole) is detected and high otherwise (omni-polar). VOH \u2265 VDD-0.2 V and VOL \u2264 0.2 V at IOUT = 0.5 mA; IOUT absolute max 1 mA. Application circuit shows a 100 pF capacitor (C2) to GND on this pin."+ "description": "Totem-pole (push-pull) CMOS Hall switch output. Drives low when an operating-point magnetic flux (|B| > BOP, either N or S pole) is detected and high otherwise (omni-polar). VOH ≥ VDD-0.2 V and VOL ≤ 0.2 V at IOUT = 0.5 mA; IOUT absolute max 1 mA. Application circuit shows a 100 pF capacitor (C2) to GND on this pin." }, { "number": "3",@@ -108,5 +108,8 @@ "docs/wh251e-3-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }