component
WD3168E-6
Public Made by Adomby adom
WILLSEMI Will Semicon Charge Pumps, SOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
wd3168e-6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+88−8
package.json+46−6@@ -65,25 +65,25 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable control input, active high; logic high threshold 1.3V, logic low threshold 0.4V, absolute max 5.5V; internal 2M\u03a9 pull-down resistor allows pin to float for always-on operation."+ "description": "Enable control input, active high; logic high threshold 1.3V, logic low threshold 0.4V, absolute max 5.5V; internal 2MΩ pull-down resistor allows pin to float for always-on operation." }, { "number": "4", "name": "CP-", "type": "passive",- "description": "Negative terminal of external 1\u00b5F flying capacitor; connected to the bottom plate of the flying capacitor used by the x2 charge pump."+ "description": "Negative terminal of external 1µF flying capacitor; connected to the bottom plate of the flying capacitor used by the x2 charge pump." }, { "number": "5", "name": "VIN", "type": "power_in",- "description": "Input power supply; operating range 2.7V to 5.5V, absolute maximum 6V; bypass with 1\u00b5F (or 4.7\u00b5F for low-ripple) ceramic capacitor placed as close to pin as possible."+ "description": "Input power supply; operating range 2.7V to 5.5V, absolute maximum 6V; bypass with 1µF (or 4.7µF for low-ripple) ceramic capacitor placed as close to pin as possible." }, { "number": "6", "name": "CP+", "type": "passive",- "description": "Positive terminal of external 1\u00b5F flying capacitor; charged from VIN during phase 1 of the two-phase non-overlapping clock, then stacked in series with VIN to VOUT during phase 2."+ "description": "Positive terminal of external 1µF flying capacitor; charged from VIN during phase 1 of the two-phase non-overlapping clock, then stacked in series with VIN to VOUT during phase 2." } ], "provenance": {@@ -120,6 +120,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "wd3168e-6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "wd3168e-6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4f209bb276f19836b94a65f57f7c22da7499d2b06cc37d980cdd7a3538ea677f",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -105,7 +105,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "wd3168e-6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "wd3168e-6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4f209bb276f19836b94a65f57f7c22da7499d2b06cc37d980cdd7a3538ea677f",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -153,4 +193,4 @@ "public": true }, "updated_at": "2026-09-25T14:05:05.795Z"-}+}