component
W25X05CLSNIG
Public Made by Adomby adom
Winbond Elec NOR FLASH, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "w25x05clsnig",+ "title": "W25X05CLSNIG",+ "brief": "Winbond Elec NOR FLASH, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Winbond Elec NOR FLASH, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "w25x05clsnig" ],+ "component": {+ "mpn": "W25X05CLSNIG",+ "manufacturer": "Winbond Elec",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "NOR FLASH",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2202131500_Winbond-Elec-W25X05CLSNIG_C2641187.pdf",+ "parts": {+ "symbol": "w25x05clsnig.kicad_sym",+ "footprint": "w25x05clsnig.kicad_mod",+ "model_3d": "w25x05clsnig.glb",+ "model_3d_step": "w25x05clsnig.step",+ "lbr": "w25x05clsnig.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "/CS",+ "type": "input",+ "description": "SPI Chip Select input, active low. When high, DO/IO0/IO1 pins are high impedance and the device is in standby. Must track VCC at power-up; a pull-up resistor may be used."+ },+ {+ "number": "2",+ "name": "DO (IO1)",+ "type": "bidirectional",+ "description": "Serial Data Output for Standard SPI (unidirectional output on falling edge of CLK). Becomes bidirectional I/O pin IO1 during Dual SPI Fast Read Dual Output (3Bh) and Fast Read Dual I/O (BBh) instructions."+ },+ {+ "number": "3",+ "name": "/WP",+ "type": "input",+ "description": "Write Protect input, active low. In conjunction with the Status Register SRP, TB, BP1 and BP0 bits, hardware-protects a portion or the entire memory array from write/erase and locks the Status Register."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0V) for VCC (2.3V-3.6V supply)."+ },+ {+ "number": "5",+ "name": "DI (IO0)",+ "type": "bidirectional",+ "description": "Serial Data Input for Standard SPI (unidirectional input latched on rising edge of CLK for instructions/addresses/data). Becomes bidirectional I/O pin IO0 during Dual SPI Fast Read Dual Output (3Bh) and Fast Read Dual I/O (BBh) instructions."+ },+ {+ "number": "6",+ "name": "CLK",+ "type": "input",+ "description": "SPI Serial Clock input, up to 104 MHz. Provides timing for serial input (rising edge) and output (falling edge) operations. Supports SPI Mode 0 (0,0) and Mode 3 (1,1)."+ },+ {+ "number": "7",+ "name": "/HOLD",+ "type": "input",+ "description": "Hold input, active low. When asserted with /CS low, pauses device operation: DO becomes high-impedance and DI/CLK are ignored, allowing the SPI bus to be shared without losing device state."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply input, 2.3V to 3.6V (2.5V / 3V / 3.3V nominal). Typical 1 mA active current, <1 uA power-down."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2202131500_Winbond-Elec-W25X05CLSNIG_C2641187.pdf",+ "pages": 49,+ "sha256": "155c39e3a18d20f2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Winbond Elec",+ "Package": "SOIC-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "w25x05clsnig"+ ],+ "discovery_pitch": "W25X05CLSNIG (Winbond Elec) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/w25x05clsnig-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }