component
W25Q80DVSSIG
Public Made by Adomby adom
Winbond Elec NOR FLASH, SOIC-8-208mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "w25q80dvssig",+ "title": "W25Q80DVSSIG",+ "brief": "Winbond Elec NOR FLASH, SOIC-8-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Winbond Elec NOR FLASH, SOIC-8-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "w25q80dvssig" ],+ "component": {+ "mpn": "W25Q80DVSSIG",+ "manufacturer": "Winbond Elec",+ "package": "SOIC-8-208mil",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "NOR FLASH",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/80d59756ca2c423292949560b68dc23a.pdf",+ "parts": {+ "symbol": "w25q80dvssig.kicad_sym",+ "footprint": "w25q80dvssig.kicad_mod",+ "model_3d": "w25q80dvssig.glb",+ "model_3d_step": "w25q80dvssig.step",+ "lbr": "w25q80dvssig.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "/CS",+ "type": "input",+ "description": "SPI Chip Select input, active low. When high the device is deselected and DO/IO pins are high-impedance; when low the device is enabled. A pull-up resistor to VCC is recommended to guarantee deselect at power-up."+ },+ {+ "number": "2",+ "name": "DO (IO1)",+ "type": "bidirectional",+ "description": "Serial Data Output in Standard SPI mode (data shifted out on the falling edge of CLK). In Dual/Quad SPI modes this pin becomes bidirectional IO1."+ },+ {+ "number": "3",+ "name": "/WP (IO2)",+ "type": "bidirectional",+ "description": "Hardware Write Protect input, active low, used with the Status Register Block Protect and SRP bits to write-protect all or a portion of the array. When the Quad Enable (QE) bit is set the pin is repurposed as bidirectional IO2 for Quad SPI."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "5",+ "name": "DI (IO0)",+ "type": "bidirectional",+ "description": "Serial Data Input in Standard SPI mode (data shifted in on the rising edge of CLK). In Dual/Quad SPI modes this pin becomes bidirectional IO0."+ },+ {+ "number": "6",+ "name": "CLK",+ "type": "input",+ "description": "SPI serial clock input. Provides timing for serial input on the rising edge and serial output on the falling edge. Supports clock rates up to 104MHz."+ },+ {+ "number": "7",+ "name": "/HOLD (IO3)",+ "type": "bidirectional",+ "description": "Hold input, active low. When /HOLD is asserted while /CS is low, DO goes high-impedance and DI/CLK are ignored so the device can be paused while selected. When Quad Enable (QE) is set the pin is repurposed as bidirectional IO3 for Quad SPI."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply input, 2.7V to 3.6V. Recommended to decouple with a bulk and a ceramic bypass capacitor close to the pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/80d59756ca2c423292949560b68dc23a.pdf",+ "pages": 71,+ "sha256": "bd7e65b1335bb21d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Winbond Elec",+ "Package": "SOIC-8-208mil",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "w25q80dvssig"+ ],+ "discovery_pitch": "W25Q80DVSSIG (Winbond Elec) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/w25q80dvssig-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }