W25Q80DVSSIG

@@ -0,0 +1,57 @@+# W25Q80DVSSIG++**Winbond Elec** · NOR FLASH · SOIC-8-208mil++W25Q80DVSSIG from Winbond Elec, in a SOIC-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | /CS | input | SPI Chip Select input, active low. When high the device is deselected and DO/IO pins are high-impedance; when low the device is enabled. A pull-up resistor to VCC is recommended to guarantee deselect at power-up. |+| 2 | DO (IO1) | bidirectional | Serial Data Output in Standard SPI mode (data shifted out on the falling edge of CLK). In Dual/Quad SPI modes this pin becomes bidirectional IO1. |+| 3 | /WP (IO2) | bidirectional | Hardware Write Protect input, active low, used with the Status Register Block Protect and SRP bits to write-protect all or a portion of the array. When the Quad Enable (QE) bit is set the pin is repurposed as bidirectional IO2 for Quad SPI. |+| 4 | GND | power_in | Ground reference for the device. |+| 5 | DI (IO0) | bidirectional | Serial Data Input in Standard SPI mode (data shifted in on the rising edge of CLK). In Dual/Quad SPI modes this pin becomes bidirectional IO0. |+| 6 | CLK | input | SPI serial clock input. Provides timing for serial input on the rising edge and serial output on the falling edge. Supports clock rates up to 104MHz. |+| 7 | /HOLD (IO3) | bidirectional | Hold input, active low. When /HOLD is asserted while /CS is low, DO goes high-impedance and DI/CLK are ignored so the device can be paused while selected. When Quad Enable (QE) is set the pin is repurposed as bidirectional IO3 for Quad SPI. |+| 8 | VCC | power_in | Power supply input, 2.7V to 3.6V. Recommended to decouple with a bulk and a ceramic bypass capacitor close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Winbond Elec |+| Package | SOIC-8-208mil |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `W25Q80DVSSIGSSIG`+- `W25Q80DVSSIGSSIQ`+- `W25Q80DVSSIGSNIG`+- `W25Q80DVSSIGSNIQ`+- `W25Q80DVSSIGSVIG`+- `W25Q80DVSSIGSVIQ`+- `W25Q80DVSSIGZPIG`+- `W25Q80DVSSIGZPIQ`+- `W25Q80DVSSIGUXIE`+- `W25Q80DVSSIGDAIG`+- `W25Q80DVSSIGBYIT`++## CAD (KiCad official)++- Symbol: `W25Q80DVSSIG`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8-208mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Winbond Elec datasheet](docs/w25q80dvssig-datasheet.pdf) (71 pp, sha256 `bd7e65b1335bb21d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/w25q80dvssig-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "w25q80dvssig",+  "version": "0.1.0",+  "type": "component",+  "description": "Winbond Elec NOR FLASH, SOIC-8-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "w25q80dvssig"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "w25q80dvssig.kicad_sym",+    "w25q80dvssig.kicad_mod",+    "w25q80dvssig.glb",+    "w25q80dvssig.step",+    "w25q80dvssig.lbr",+    "docs/hero.png",+    "docs/w25q80dvssig-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file