component
W25Q80DVSNIG
Public Made by Adomby adom
Winbond Elec NOR FLASH, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "w25q80dvsnig",+ "title": "W25Q80DVSNIG",+ "brief": "Winbond Elec NOR FLASH, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Winbond Elec NOR FLASH, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "w25q80dvsnig" ],+ "component": {+ "mpn": "W25Q80DVSNIG",+ "manufacturer": "Winbond Elec",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "NOR FLASH",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a7f66f56b779e6b9f43a9efa6e77d65e.pdf",+ "parts": {+ "symbol": "w25q80dvsnig.kicad_sym",+ "footprint": "w25q80dvsnig.kicad_mod",+ "model_3d": "w25q80dvsnig.glb",+ "model_3d_step": "w25q80dvsnig.step",+ "lbr": "w25q80dvsnig.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "/CS",+ "type": "input",+ "description": "Active-low SPI Chip Select input. Drive low to select the device and clock in instructions on CLK; drive high to deselect and place DO/IO pins into Hi-Z. After power-up /CS must transition high-to-low before the first instruction; a pull-up to VCC is recommended."+ },+ {+ "number": "2",+ "name": "DO (IO1)",+ "type": "bidirectional",+ "description": "Serial Data Output in Standard SPI mode (data shifts out on falling edge of CLK). Becomes bidirectional IO1 for Dual/Quad SPI instructions."+ },+ {+ "number": "3",+ "name": "/WP (IO2)",+ "type": "bidirectional",+ "description": "Active-low Write Protect input, used with Status Register CMP/SEC/TB/BP2/BP1/BP0/SRP0 bits to hardware-protect part or all of the array. Becomes bidirectional IO2 when Quad Enable (QE) bit is set for Quad SPI I/O."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference (0 V)."+ },+ {+ "number": "5",+ "name": "DI (IO0)",+ "type": "bidirectional",+ "description": "Serial Data Input in Standard SPI mode (instructions, addresses and data clocked in on rising edge of CLK). Becomes bidirectional IO0 for Dual/Quad SPI instructions."+ },+ {+ "number": "6",+ "name": "CLK",+ "type": "input",+ "description": "SPI Serial Clock input. Provides timing for serial input and output; up to 104MHz on W25Q80DV. Data is latched on rising edge and shifted out on falling edge."+ },+ {+ "number": "7",+ "name": "/HOLD (IO3)",+ "type": "bidirectional",+ "description": "Active-low Hold input pauses serial communication while /CS is low: DO goes Hi-Z and DI/CLK are ignored. Becomes bidirectional IO3 when Quad Enable (QE) bit is set for Quad SPI I/O."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply input. W25Q80DV: 2.7 V to 3.6 V (single supply). Decouple to GND with a local bypass capacitor near the pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/a7f66f56b779e6b9f43a9efa6e77d65e.pdf",+ "pages": 73,+ "sha256": "7f8c606061fa6b81",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Winbond Elec",+ "Package": "SOIC-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "w25q80dvsnig"+ ],+ "discovery_pitch": "W25Q80DVSNIG (Winbond Elec) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/w25q80dvsnig-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }