component
W25Q64JVSFIQ TR
Public Made by Adomby adom
Winbond Elec W25Q64JVSFIQ TR NOR FLASH, SOIC-16-300mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "w25q64jvsfiq-tr",+ "title": "W25Q64JVSFIQ TR",+ "brief": "Winbond Elec W25Q64JVSFIQ TR NOR FLASH, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Winbond Elec W25Q64JVSFIQ TR NOR FLASH, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "w25q64jvsfiq tr" ],+ "component": {+ "mpn": "W25Q64JVSFIQ TR",+ "manufacturer": "Winbond Elec W25Q64JVSFIQ TR",+ "package": "SOIC-16-300mil",+ "pin_count": 16,+ "category": "Memory",+ "subcategory": "NOR FLASH",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2304140030_Winbond-Elec-W25Q64JVSFIQ-TR_C2456207.pdf",+ "parts": {+ "symbol": "w25q64jvsfiq-tr.kicad_sym",+ "footprint": "w25q64jvsfiq-tr.kicad_mod",+ "model_3d": "w25q64jvsfiq-tr.glb",+ "model_3d_step": "w25q64jvsfiq-tr.step",+ "lbr": "w25q64jvsfiq-tr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "/HOLD or /RESET (IO3)",+ "type": "bidirectional",+ "description": "In Standard/Dual SPI mode, this pin is the active-low /HOLD input, which pauses serial communication while /CS is low. When QE=1 (Quad Enable set in Status Register-2), this pin becomes IO3 for Quad SPI instructions. The /HOLD function is not available in Quad I/O mode."+ },+ {+ "number": "2",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply input. Operating range 2.7V to 3.6V. /CS must track VCC at power-up/power-down."+ },+ {+ "number": "3",+ "name": "/RESET",+ "type": "input",+ "description": "Dedicated active-low hardware reset input. Driving /RESET low for a minimum of ~1 \u00b5s terminates any external or internal operation and returns the device to its power-on state. This pin is dedicated regardless of device settings; if unused, it may be left floating or connected to VCC."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to any potential; not internally bonded."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to any potential; not internally bonded."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to any potential; not internally bonded."+ },+ {+ "number": "7",+ "name": "/CS",+ "type": "input",+ "description": "Active-low SPI Chip Select. When high the device is deselected and all data output pins (DO, IO0..IO3) are high-impedance. When low the device is selected and instructions can be written / data read. /CS must track VCC at power-up; a pull-up resistor on /CS can be used."+ },+ {+ "number": "8",+ "name": "DO (IO1)",+ "type": "bidirectional",+ "description": "Standard SPI serial data output (DO) - unidirectional, driven on the falling edge of CLK. In Dual/Quad SPI it becomes bidirectional IO1."+ },+ {+ "number": "9",+ "name": "/WP (IO2)",+ "type": "bidirectional",+ "description": "Active-low Write Protect input in Standard/Dual SPI - used with the Status Register block-protect and SRP bits to hardware-protect the register. In Quad SPI (QE=1) it becomes bidirectional IO2."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for supply and I/O."+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to any potential; not internally bonded."+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to any potential; not internally bonded."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to any potential; not internally bonded."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to any potential; not internally bonded."+ },+ {+ "number": "15",+ "name": "DI (IO0)",+ "type": "bidirectional",+ "description": "Standard SPI serial data input (DI) - unidirectional, sampled on the rising edge of CLK. In Dual/Quad SPI it becomes bidirectional IO0."+ },+ {+ "number": "16",+ "name": "CLK",+ "type": "input",+ "description": "SPI serial clock input. Provides the timing reference for all serial I/O; supports up to 133 MHz (266/532 MHz equivalent throughput for Dual/Quad I/O)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2304140030_Winbond-Elec-W25Q64JVSFIQ-TR_C2456207.pdf",+ "pages": 78,+ "sha256": "452d906c3be0da07",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Winbond Elec W25Q64JVSFIQ TR",+ "Package": "SOIC-16-300mil",+ "Category": "Memory",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "w25q64jvsfiq tr"+ ],+ "discovery_pitch": "W25Q64JVSFIQ TR (Winbond Elec W25Q64JVSFIQ TR) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/w25q64jvsfiq-tr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }