W25Q64JVSFIQ TR

@@ -0,0 +1,73 @@+# W25Q64JVSFIQ TR++**Winbond Elec W25Q64JVSFIQ TR** · NOR FLASH · SOIC-16-300mil++W25Q64JVSFIQ TR from Winbond Elec W25Q64JVSFIQ TR, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | /HOLD or /RESET (IO3) | bidirectional | In Standard/Dual SPI mode, this pin is the active-low /HOLD input, which pauses serial communication while /CS is low. When QE=1 (Quad Enable set in Status Register-2), this pin becomes IO3 for Quad SPI instructions. The /HOLD function is not available in Quad I/O mode. |+| 2 | VCC | power_in | Power supply input. Operating range 2.7V to 3.6V. /CS must track VCC at power-up/power-down. |+| 3 | /RESET | input | Dedicated active-low hardware reset input. Driving /RESET low for a minimum of ~1 µs terminates any external or internal operation and returns the device to its power-on state. This pin is dedicated regardless of device settings; if unused, it may be left floating or connected to VCC. |+| 4 | NC | unconnected | No connect. Leave floating or tie to any potential; not internally bonded. |+| 5 | NC | unconnected | No connect. Leave floating or tie to any potential; not internally bonded. |+| 6 | NC | unconnected | No connect. Leave floating or tie to any potential; not internally bonded. |+| 7 | /CS | input | Active-low SPI Chip Select. When high the device is deselected and all data output pins (DO, IO0..IO3) are high-impedance. When low the device is selected and instructions can be written / data read. /CS must track VCC at power-up; a pull-up resistor on /CS can be used. |+| 8 | DO (IO1) | bidirectional | Standard SPI serial data output (DO) - unidirectional, driven on the falling edge of CLK. In Dual/Quad SPI it becomes bidirectional IO1. |+| 9 | /WP (IO2) | bidirectional | Active-low Write Protect input in Standard/Dual SPI - used with the Status Register block-protect and SRP bits to hardware-protect the register. In Quad SPI (QE=1) it becomes bidirectional IO2. |+| 10 | GND | power_in | Ground reference for supply and I/O. |+| 11 | NC | unconnected | No connect. Leave floating or tie to any potential; not internally bonded. |+| 12 | NC | unconnected | No connect. Leave floating or tie to any potential; not internally bonded. |+| 13 | NC | unconnected | No connect. Leave floating or tie to any potential; not internally bonded. |+| 14 | NC | unconnected | No connect. Leave floating or tie to any potential; not internally bonded. |+| 15 | DI (IO0) | bidirectional | Standard SPI serial data input (DI) - unidirectional, sampled on the rising edge of CLK. In Dual/Quad SPI it becomes bidirectional IO0. |+| 16 | CLK | input | SPI serial clock input. Provides the timing reference for all serial I/O; supports up to 133 MHz (266/532 MHz equivalent throughput for Dual/Quad I/O). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Winbond Elec W25Q64JVSFIQ TR |+| Package | SOIC-16-300mil |+| Category | Memory |+| Pins | 16 |++## Ordering variants++- `W25Q64JVSFIQ TRSFIQ`+- `W25Q64JVSFIQ TRSFIM`+- `W25Q64JVSFIQ TRSSIQ`+- `W25Q64JVSFIQ TRSSIG`+- `W25Q64JVSFIQ TRSSIM`+- `W25Q64JVSFIQ TRZPIQ`+- `W25Q64JVSFIQ TRZPIG`+- `W25Q64JVSFIQ TRZPIM`+- `W25Q64JVSFIQ TRZEIQ`+- `W25Q64JVSFIQ TRZEIG`+- `W25Q64JVSFIQ TRZEIM`+- `W25Q64JVSFIQ TRXGIQ`+- `W25Q64JVSFIQ TRXGIG`+- `W25Q64JVSFIQ TRXGIM`+- `W25Q64JVSFIQ TRTBIQ`+- `W25Q64JVSFIQ TRTBIM`+- `W25Q64JVSFIQ TRTCIQ`+- `W25Q64JVSFIQ TRTCIM`+- `W25Q64JVSFIQ TRBYIQ`++## CAD (KiCad official)++- Symbol: `W25Q64JVSFIQ TR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Winbond Elec W25Q64JVSFIQ TR datasheet](docs/w25q64jvsfiq-tr-datasheet.pdf) (78 pp, sha256 `452d906c3be0da07`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/w25q64jvsfiq-tr-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "w25q64jvsfiq-tr",+  "version": "0.1.0",+  "type": "component",+  "description": "Winbond Elec W25Q64JVSFIQ TR NOR FLASH, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "w25q64jvsfiq tr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "w25q64jvsfiq-tr.kicad_sym",+    "w25q64jvsfiq-tr.kicad_mod",+    "w25q64jvsfiq-tr.glb",+    "w25q64jvsfiq-tr.step",+    "w25q64jvsfiq-tr.lbr",+    "docs/hero.png",+    "docs/w25q64jvsfiq-tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file