W25Q32JV

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "w25q32jv",+  "title": "W25Q32JV",+  "brief": "Winbond 32 Mbit (4 MB) serial NOR flash, SOIC-8. Standard/Dual/Quad SPI, 133 MHz, 4 KB sectors. Datasheet-verified.",   "version": "0.1.0",-  "type": "component",-  "description": "Winbond 32 Mbit (4 MB) serial NOR flash, SOIC-8. Standard/Dual/Quad SPI, 133 MHz, 4 KB sectors. Datasheet-verified.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "memory",@@ -13,6 +16,122 @@     "soic-8",     "winbond"   ],+  "component": {+    "mpn": "W25Q32JV",+    "manufacturer": "Winbond",+    "package": "SOIC-8 (208 mil)",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "32 Mbit SPI NOR flash",+    "datasheet": "https://www.winbond.com/resource-files/W25Q32JV%20RevJ%2012242024%20Plus.pdf",+    "parts": {+      "symbol": "w25q32jv.kicad_sym",+      "footprint": "w25q32jv.kicad_mod",+      "model_3d": "w25q32jv.glb"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "/CS",+        "type": "input",+        "description": "Chip Select input (active-low). Drive low to enable the device and begin an SPI transaction; drive high to deselect and place DO/IO pins in high-impedance. Requires a full high-to-low transition after power-up before the first instruction; a pull-up resistor is recommended."+      },+      {+        "number": "2",+        "name": "DO (IO1)",+        "type": "bidirectional",+        "description": "Standard SPI serial Data Output; also acts as bidirectional IO1 for Dual/Quad SPI operations. Data is shifted out on the falling edge of CLK in Standard SPI; in Dual/Quad modes it functions as a bidirectional data line."+      },+      {+        "number": "3",+        "name": "/WP (IO2)",+        "type": "bidirectional",+        "description": "Active-low Write Protect input for the Status Register in Standard/Dual SPI mode; reassigned as bidirectional IO2 when the Quad Enable (QE) bit in Status Register-2 is set for Quad SPI operations."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device supply."+      },+      {+        "number": "5",+        "name": "DI (IO0)",+        "type": "bidirectional",+        "description": "Standard SPI serial Data Input; also acts as bidirectional IO0 for Dual/Quad SPI operations. Instructions, addresses, and data are latched on the rising edge of CLK."+      },+      {+        "number": "6",+        "name": "CLK",+        "type": "input",+        "description": "SPI Serial Clock input providing the timing for all serial input and output operations. Supports up to 133 MHz; SPI Mode 0 (0,0) and Mode 3 (1,1) are supported."+      },+      {+        "number": "7",+        "name": "/HOLD or /RESET (IO3)",+        "type": "bidirectional",+        "description": "Active-low Hold input (or optional Reset input, ordering-code dependent) in Standard/Dual SPI mode; reassigned as bidirectional IO3 when Quad Enable (QE) is set. /HOLD pauses serial communication without deselecting the device."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive power supply, 2.7 V to 3.6 V. Must track above the power-on threshold before /CS is driven low."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.winbond.com/resource-files/W25Q32JV%20RevJ%2012242024%20Plus.pdf",+        "pages": 16,+        "sha256": "16abfa1952dadcdb",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Type": "Serial NOR flash memory",+      "Density": "32 Mbit (4 MB)",+      "Interface": "Standard / Dual / Quad SPI + QPI",+      "Max clock": "133 MHz",+      "Erase granularity": "4 KB sector (uniform)",+      "Endurance": "100k erase/program cycles",+      "Supply voltage": "2.7-3.6 V",+      "Package": "SOIC-8 (208 mil)"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "w25q32jv",+    "spi flash 32mbit",+    "4mb flash",+    "quad spi flash",+    "winbond w25q32"+  ],+  "discovery_pitch": "W25Q32JV 32 Mbit (4 MB) serial NOR flash with Standard/Dual/Quad SPI (SOIC-8) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -28,10 +147,5 @@     "docs/w25q32jv-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file