← Commit history

Initial commit: component/w25q128fvsig

Ray ·12282c00ea ·
2 files changed +185
README.mdadded+44
@@ -0,0 +1,44 @@+# W25Q128FVSIG++**Winbond Elec** · NOR FLASH · SOIC-8-208mil++W25Q128FVSIG from Winbond Elec, in a SOIC-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | /CS | input | Chip Select Input - active low control signal; device is selected for operation when /CS is low, deselected when high with serial data output pins in high impedance state. |+| 2 | DO (IO1) | bidirectional | Data Output / Data Input Output 1 - serial data output in standard SPI mode on falling edge of CLK; becomes bidirectional IO1 pin in Dual/Quad SPI modes when used for address or data I/O. |+| 3 | /WP (IO2) | bidirectional | Write Protect Input / Data Input Output 2 - active low hardware write protect input that prevents Status Register writes in standard and Dual SPI operation; becomes IO2 pin in Quad SPI when QE bit is set. |+| 4 | GND | power_in | Ground - power supply ground connection for 128M-bit serial flash memory. |+| 5 | DI (IO0) | bidirectional | Data Input / Data Input Output 0 - serial data input in standard SPI mode sampled on rising edge of CLK for instructions, addresses, and data; becomes bidirectional IO0 pin in Dual/Quad SPI modes. |+| 6 | CLK | input | Serial Clock Input - timing clock for serial input and output operations; supports DC to 104 MHz frequency for Fast Read and Quad instructions, DC to 50 MHz for Read Data (03h) instruction. |+| 7 | /HOLD or /RESET (IO3) | bidirectional | Hold or Reset Input / Data Input Output 3 - in Standard/Dual SPI with QE=0, active low hold input pauses device operation or reset input requires ≥1 µs low pulse; becomes IO3 pin in Quad SPI when QE bit is set. |+| 8 | VCC | power_in | Power Supply - supply voltage input operating range 2.7V to 3.6V required for device operation with active current 4 mA typical and standby current 10-50 µA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Winbond Elec |+| Package | SOIC-8-208mil |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `W25Q128FVSIG`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8-208mil (KiCad packages3D, STEP)+- 3D model files: `w25q128fvsig-etched.step` / `w25q128fvsig-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `w25q128fvsig.step` / `w25q128fvsig.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Winbond Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784871087742976) (99 pp, sha256 `828506b99e659636`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/w25q128fvsig-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "w25q128fvsig",+  "version": "0.1.0",+  "type": "component",+  "description": "Winbond Elec NOR FLASH, SOIC-8-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "w25q128fvsig",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "w25q128fvsig.kicad_sym",+    "w25q128fvsig.kicad_mod",+    "w25q128fvsig.glb",+    "w25q128fvsig.step",+    "w25q128fvsig.lbr",+    "docs/hero.png",+    "docs/w25q128fvsig-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "W25Q128FVSIG",+    "manufacturer": "Winbond Elec",+    "package": "SOIC-8-208mil",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "NOR FLASH",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784871087742976",+    "parts": {+      "symbol": "w25q128fvsig.kicad_sym",+      "footprint": "w25q128fvsig.kicad_mod",+      "model_3d": "w25q128fvsig-etched.glb",+      "model_3d_plain": "w25q128fvsig.glb",+      "model_3d_step": "w25q128fvsig-etched.step",+      "model_3d_step_plain": "w25q128fvsig.step",+      "lbr": "w25q128fvsig.lbr"+    },+    "distributor_links": {+      "lcsc": "C571265"+    },+    "pins": [+      {+        "number": "1",+        "name": "/CS",+        "type": "input",+        "description": "Chip Select Input - active low control signal; device is selected for operation when /CS is low, deselected when high with serial data output pins in high impedance state."+      },+      {+        "number": "2",+        "name": "DO (IO1)",+        "type": "bidirectional",+        "description": "Data Output / Data Input Output 1 - serial data output in standard SPI mode on falling edge of CLK; becomes bidirectional IO1 pin in Dual/Quad SPI modes when used for address or data I/O."+      },+      {+        "number": "3",+        "name": "/WP (IO2)",+        "type": "bidirectional",+        "description": "Write Protect Input / Data Input Output 2 - active low hardware write protect input that prevents Status Register writes in standard and Dual SPI operation; becomes IO2 pin in Quad SPI when QE bit is set."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground - power supply ground connection for 128M-bit serial flash memory."+      },+      {+        "number": "5",+        "name": "DI (IO0)",+        "type": "bidirectional",+        "description": "Data Input / Data Input Output 0 - serial data input in standard SPI mode sampled on rising edge of CLK for instructions, addresses, and data; becomes bidirectional IO0 pin in Dual/Quad SPI modes."+      },+      {+        "number": "6",+        "name": "CLK",+        "type": "input",+        "description": "Serial Clock Input - timing clock for serial input and output operations; supports DC to 104 MHz frequency for Fast Read and Quad instructions, DC to 50 MHz for Read Data (03h) instruction."+      },+      {+        "number": "7",+        "name": "/HOLD or /RESET (IO3)",+        "type": "bidirectional",+        "description": "Hold or Reset Input / Data Input Output 3 - in Standard/Dual SPI with QE=0, active low hold input pauses device operation or reset input requires ≥1 µs low pulse; becomes IO3 pin in Quad SPI when QE bit is set."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Power Supply - supply voltage input operating range 2.7V to 3.6V required for device operation with active current 4 mA typical and standby current 10-50 µA."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 99,+        "cost_usd": 0.5248,+        "at": "2026-09-22T03:36:17"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784871087742976",+        "pages": 99,+        "sha256": "828506b99e659636",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file