← Commit history

Initial commit: component/vt1101r

Ray ·b395ae4d75 ·
2 files changed +280
README.mdadded+58
@@ -0,0 +1,58 @@+# VT1101R++**VIBRATION** · RFID ICs · QFN-20(4x4)++VT1101R from VIBRATION, in a QFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SCK | input | SPI serial interface clock input pin; operates at maximum frequency of 6.5 MHz |+| 2 | GDO1 | tri_state | SPI serial interface data output (SO); tri-state output that shares SO function with SPI interface |+| 3 | GDO2 | output | Digital test output pin; programmable general-purpose digital output or test signal |+| 4 | DV33 | power_in | Digital power supply pin; supply voltage 2.4-3.6V nominal 3.3V |+| 5 | VOUT18 | power_out | Digital LDO output pin; 1.8V regulated output from on-chip digital low-dropout regulator |+| 6 | GDO0 | output | Analog test output pin; programmable general-purpose output with default XOSC/192 clock frequency |+| 7 | CSN | input | SPI chip select input pin; active low signal for enabling SPI transactions |+| 8 | AV33 | power_in | Analog power supply pin; 3.3V supply voltage for analog circuits |+| 9 | XI | input | Crystal oscillator input pin; connects to external 26 MHz crystal oscillator with load capacitance 8-20 pF |+| 10 | XO | output | Crystal oscillator output pin; connects to external 26 MHz crystal oscillator with load capacitance 8-20 pF |+| 11 | AV33 | power_in | Analog power supply pin; 3.3V supply voltage for analog circuits |+| 12 | PA_OUT | output | Power amplifier RF output pin; provides transmit RF output with output impedance 35−j3.4 Ω at 433 MHz |+| 13 | RF_INP | input | RF receiver differential input (positive); receives RF signals with differential input impedance 180−j110 Ω at 433 MHz |+| 14 | RF_INN | input | RF receiver differential input (negative); receives RF signals with differential input impedance 180−j110 Ω at 433 MHz |+| 15 | AV33 | power_in | Analog power supply pin; 3.3V supply voltage for analog circuits |+| 16 | GND | power_in | Analog ground reference pin |+| 17 | RFE | passive | RF impedance reference resistor connection pin; external component connection for RF matching network |+| 18 | DV33 | power_in | Digital power supply pin; supply voltage 2.4-3.6V nominal 3.3V |+| 19 | GND | power_in | Ground reference pin |+| 20 | MOSI | input | SPI serial interface data input pin; receives serial data from master microcontroller |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | VIBRATION |+| Package | QFN-20(4x4) |+| Category | RF And Wireless |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `VT1101R`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm`+- 3D model: QFN-20(4x4) (KiCad packages3D, STEP)+- 3D model files: `vt1101r-etched.step` / `vt1101r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `vt1101r.step` / `vt1101r.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [VIBRATION datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590923761816723456) (36 pp, sha256 `de7ca298129a9570`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/vt1101r-datasheet.pdf)
page.jsonadded+222
@@ -0,0 +1,222 @@+{+  "slug": "vt1101r",+  "version": "0.1.0",+  "type": "component",+  "description": "VIBRATION RFID ICs, QFN-20(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "rf and wireless",+    "vt1101r",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "vt1101r.kicad_sym",+    "vt1101r.kicad_mod",+    "vt1101r.glb",+    "vt1101r.step",+    "vt1101r.lbr",+    "docs/hero.png",+    "docs/vt1101r-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "VT1101R",+    "manufacturer": "VIBRATION",+    "package": "QFN-20(4x4)",+    "pin_count": 21,+    "category": "RF And Wireless",+    "subcategory": "RFID ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590923761816723456",+    "parts": {+      "symbol": "vt1101r.kicad_sym",+      "footprint": "vt1101r.kicad_mod",+      "model_3d": "vt1101r-etched.glb",+      "model_3d_plain": "vt1101r.glb",+      "model_3d_step": "vt1101r-etched.step",+      "model_3d_step_plain": "vt1101r.step",+      "lbr": "vt1101r.lbr"+    },+    "distributor_links": {+      "lcsc": "C20625803"+    },+    "pins": [+      {+        "number": "1",+        "name": "SCK",+        "type": "input",+        "description": "SPI serial interface clock input pin; operates at maximum frequency of 6.5 MHz"+      },+      {+        "number": "2",+        "name": "GDO1",+        "type": "tri_state",+        "description": "SPI serial interface data output (SO); tri-state output that shares SO function with SPI interface"+      },+      {+        "number": "3",+        "name": "GDO2",+        "type": "output",+        "description": "Digital test output pin; programmable general-purpose digital output or test signal"+      },+      {+        "number": "4",+        "name": "DV33",+        "type": "power_in",+        "description": "Digital power supply pin; supply voltage 2.4-3.6V nominal 3.3V"+      },+      {+        "number": "5",+        "name": "VOUT18",+        "type": "power_out",+        "description": "Digital LDO output pin; 1.8V regulated output from on-chip digital low-dropout regulator"+      },+      {+        "number": "6",+        "name": "GDO0",+        "type": "output",+        "description": "Analog test output pin; programmable general-purpose output with default XOSC/192 clock frequency"+      },+      {+        "number": "7",+        "name": "CSN",+        "type": "input",+        "description": "SPI chip select input pin; active low signal for enabling SPI transactions"+      },+      {+        "number": "8",+        "name": "AV33",+        "type": "power_in",+        "description": "Analog power supply pin; 3.3V supply voltage for analog circuits"+      },+      {+        "number": "9",+        "name": "XI",+        "type": "input",+        "description": "Crystal oscillator input pin; connects to external 26 MHz crystal oscillator with load capacitance 8-20 pF"+      },+      {+        "number": "10",+        "name": "XO",+        "type": "output",+        "description": "Crystal oscillator output pin; connects to external 26 MHz crystal oscillator with load capacitance 8-20 pF"+      },+      {+        "number": "11",+        "name": "AV33",+        "type": "power_in",+        "description": "Analog power supply pin; 3.3V supply voltage for analog circuits"+      },+      {+        "number": "12",+        "name": "PA_OUT",+        "type": "output",+        "description": "Power amplifier RF output pin; provides transmit RF output with output impedance 35−j3.4 Ω at 433 MHz"+      },+      {+        "number": "13",+        "name": "RF_INP",+        "type": "input",+        "description": "RF receiver differential input (positive); receives RF signals with differential input impedance 180−j110 Ω at 433 MHz"+      },+      {+        "number": "14",+        "name": "RF_INN",+        "type": "input",+        "description": "RF receiver differential input (negative); receives RF signals with differential input impedance 180−j110 Ω at 433 MHz"+      },+      {+        "number": "15",+        "name": "AV33",+        "type": "power_in",+        "description": "Analog power supply pin; 3.3V supply voltage for analog circuits"+      },+      {+        "number": "16",+        "name": "GND",+        "type": "power_in",+        "description": "Analog ground reference pin"+      },+      {+        "number": "17",+        "name": "RFE",+        "type": "passive",+        "description": "RF impedance reference resistor connection pin; external component connection for RF matching network"+      },+      {+        "number": "18",+        "name": "DV33",+        "type": "power_in",+        "description": "Digital power supply pin; supply voltage 2.4-3.6V nominal 3.3V"+      },+      {+        "number": "19",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference pin"+      },+      {+        "number": "20",+        "name": "MOSI",+        "type": "input",+        "description": "SPI serial interface data input pin; receives serial data from master microcontroller"+      },+      {+        "number": "21",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 18 description inconsistency: labeled DV33 but described as '模拟电源,3.3V' (analog power supply) wh",+          "exposed pad 21 added from the footprint"+        ],+        "pages_sent": 36,+        "cost_usd": 0.3339,+        "at": "2026-09-22T11:48:44"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590923761816723456",+        "pages": 36,+        "sha256": "de7ca298129a9570",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 21,+        "described": 21,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file