← Commit history

Initial commit: component/vs1053b-l

Ray ·11677aff1e ·
2 files changed +465
README.mdadded+84
@@ -0,0 +1,84 @@+# VS1053B-L++**VLSI Solution** · Audio Interface ICs · LQFP-48(7x7)++VS1053B-L from VLSI Solution, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MICP / LINE1 | input | Positive differential mic input, self-biasing / Line-in 1 |+| 2 | MICN | input | Negative differential mic input, self-biasing |+| 3 | XRESET | input | Active low asynchronous reset, schmitt-trigger input |+| 4 | DGND0 | power_in | Core & I/O ground |+| 5 | CVDD0 | power_in | Core power supply |+| 6 | IOVDD0 | power_in | I/O power supply |+| 7 | CVDD1 | power_in | Core power supply |+| 8 | DREQ | output | Data request, input bus |+| 9 | GPIO2 / DCLK1 | bidirectional | General purpose IO 2 / serial input data bus clock |+| 10 | GPIO3 / SDATA1 | bidirectional | General purpose IO 3 / serial data input |+| 11 | GPIO6 / I2S SCLK | bidirectional | General purpose IO 6 / I2S SCLK |+| 12 | GPIO7 / I2S SDATA | bidirectional | General purpose IO 7 / I2S SDATA |+| 13 | XDCS / BSYNC | input | Data chip select / byte sync |+| 14 | IOVDD1 | power_in | I/O power supply |+| 15 | VCO | output | For testing only (Clock VCO output) |+| 16 | DGND1 | power_in | Core & I/O ground |+| 17 | XTALO | output | Crystal output |+| 18 | XTALI | input | Crystal input |+| 19 | IOVDD2 | power_in | I/O power supply |+| 20 | DGND2 | power_in | Core & I/O ground |+| 21 | DGND3 | power_in | Core & I/O ground |+| 22 | DGND4 | power_in | Core & I/O ground |+| 23 | XCS | input | Chip select input (active low) |+| 24 | CVDD2 | power_in | Core power supply |+| 25 | GPIO5 / I2S MCLK | bidirectional | General purpose IO 5 / I2S MCLK |+| 26 | RX | input | UART receive, connect to IOVDD if not used |+| 27 | TX | output | UART transmit |+| 28 | SCLK | input | Clock for serial bus |+| 29 | SI | input | Serial input |+| 30 | SO | tri_state | Serial output |+| 31 | CVDD3 | power_in | Core power supply |+| 32 | XTEST | input | Reserved for test, connect to IOVDD |+| 33 | GPIO0 | bidirectional | General purpose IO 0 (SPIBOOT), use 100 kΩ pull-down resistor |+| 34 | GPIO1 | bidirectional | General purpose IO 1 |+| 35 | GND | power_in | I/O Ground |+| 36 | GPIO4 / I2S LROUT | bidirectional | General purpose IO 4 / I2S LROUT |+| 37 | AGND0 | power_in | Analog ground, low-noise reference |+| 38 | AVDD0 | power_in | Analog power supply |+| 39 | RIGHT | output | Right channel output |+| 40 | AGND1 | power_in | Analog ground |+| 41 | AGND2 | power_in | Analog ground |+| 42 | GBUF | output | Common buffer for headphones, do NOT connect to ground! |+| 43 | AVDD1 | power_in | Analog power supply |+| 44 | RCAP | bidirectional | Filtering capacitance for reference |+| 45 | AVDD2 | power_in | Analog power supply |+| 46 | LEFT | output | Left channel output |+| 47 | AGND3 | power_in | Analog ground |+| 48 | LINE2 | input | Line-in 2 (right channel) |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | VLSI Solution |+| Package | LQFP-48(7x7) |+| Category | Interface |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `VS1053B-L`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `vs1053b-l-etched.step` / `vs1053b-l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `vs1053b-l.step` / `vs1053b-l.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [VLSI Solution datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586171730008150016) (79 pp, sha256 `8b76e79550839a4b`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/vs1053b-l-datasheet.pdf)
page.jsonadded+381
@@ -0,0 +1,381 @@+{+  "slug": "vs1053b-l",+  "version": "0.1.0",+  "type": "component",+  "description": "VLSI Solution Audio Interface ICs, LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "vs1053b-l",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "vs1053b-l.kicad_sym",+    "vs1053b-l.kicad_mod",+    "vs1053b-l.glb",+    "vs1053b-l.step",+    "vs1053b-l.lbr",+    "docs/hero.png",+    "docs/vs1053b-l-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "VS1053B-L",+    "manufacturer": "VLSI Solution",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "Interface",+    "subcategory": "Audio Interface ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586171730008150016",+    "parts": {+      "symbol": "vs1053b-l.kicad_sym",+      "footprint": "vs1053b-l.kicad_mod",+      "model_3d": "vs1053b-l-etched.glb",+      "model_3d_plain": "vs1053b-l.glb",+      "model_3d_step": "vs1053b-l-etched.step",+      "model_3d_step_plain": "vs1053b-l.step",+      "lbr": "vs1053b-l.lbr"+    },+    "distributor_links": {+      "lcsc": "C9922"+    },+    "pins": [+      {+        "number": "1",+        "name": "MICP / LINE1",+        "type": "input",+        "description": "Positive differential mic input, self-biasing / Line-in 1"+      },+      {+        "number": "2",+        "name": "MICN",+        "type": "input",+        "description": "Negative differential mic input, self-biasing"+      },+      {+        "number": "3",+        "name": "XRESET",+        "type": "input",+        "description": "Active low asynchronous reset, schmitt-trigger input"+      },+      {+        "number": "4",+        "name": "DGND0",+        "type": "power_in",+        "description": "Core & I/O ground"+      },+      {+        "number": "5",+        "name": "CVDD0",+        "type": "power_in",+        "description": "Core power supply"+      },+      {+        "number": "6",+        "name": "IOVDD0",+        "type": "power_in",+        "description": "I/O power supply"+      },+      {+        "number": "7",+        "name": "CVDD1",+        "type": "power_in",+        "description": "Core power supply"+      },+      {+        "number": "8",+        "name": "DREQ",+        "type": "output",+        "description": "Data request, input bus"+      },+      {+        "number": "9",+        "name": "GPIO2 / DCLK1",+        "type": "bidirectional",+        "description": "General purpose IO 2 / serial input data bus clock"+      },+      {+        "number": "10",+        "name": "GPIO3 / SDATA1",+        "type": "bidirectional",+        "description": "General purpose IO 3 / serial data input"+      },+      {+        "number": "11",+        "name": "GPIO6 / I2S SCLK",+        "type": "bidirectional",+        "description": "General purpose IO 6 / I2S SCLK"+      },+      {+        "number": "12",+        "name": "GPIO7 / I2S SDATA",+        "type": "bidirectional",+        "description": "General purpose IO 7 / I2S SDATA"+      },+      {+        "number": "13",+        "name": "XDCS / BSYNC",+        "type": "input",+        "description": "Data chip select / byte sync"+      },+      {+        "number": "14",+        "name": "IOVDD1",+        "type": "power_in",+        "description": "I/O power supply"+      },+      {+        "number": "15",+        "name": "VCO",+        "type": "output",+        "description": "For testing only (Clock VCO output)"+      },+      {+        "number": "16",+        "name": "DGND1",+        "type": "power_in",+        "description": "Core & I/O ground"+      },+      {+        "number": "17",+        "name": "XTALO",+        "type": "output",+        "description": "Crystal output"+      },+      {+        "number": "18",+        "name": "XTALI",+        "type": "input",+        "description": "Crystal input"+      },+      {+        "number": "19",+        "name": "IOVDD2",+        "type": "power_in",+        "description": "I/O power supply"+      },+      {+        "number": "20",+        "name": "DGND2",+        "type": "power_in",+        "description": "Core & I/O ground"+      },+      {+        "number": "21",+        "name": "DGND3",+        "type": "power_in",+        "description": "Core & I/O ground"+      },+      {+        "number": "22",+        "name": "DGND4",+        "type": "power_in",+        "description": "Core & I/O ground"+      },+      {+        "number": "23",+        "name": "XCS",+        "type": "input",+        "description": "Chip select input (active low)"+      },+      {+        "number": "24",+        "name": "CVDD2",+        "type": "power_in",+        "description": "Core power supply"+      },+      {+        "number": "25",+        "name": "GPIO5 / I2S MCLK",+        "type": "bidirectional",+        "description": "General purpose IO 5 / I2S MCLK"+      },+      {+        "number": "26",+        "name": "RX",+        "type": "input",+        "description": "UART receive, connect to IOVDD if not used"+      },+      {+        "number": "27",+        "name": "TX",+        "type": "output",+        "description": "UART transmit"+      },+      {+        "number": "28",+        "name": "SCLK",+        "type": "input",+        "description": "Clock for serial bus"+      },+      {+        "number": "29",+        "name": "SI",+        "type": "input",+        "description": "Serial input"+      },+      {+        "number": "30",+        "name": "SO",+        "type": "tri_state",+        "description": "Serial output"+      },+      {+        "number": "31",+        "name": "CVDD3",+        "type": "power_in",+        "description": "Core power supply"+      },+      {+        "number": "32",+        "name": "XTEST",+        "type": "input",+        "description": "Reserved for test, connect to IOVDD"+      },+      {+        "number": "33",+        "name": "GPIO0",+        "type": "bidirectional",+        "description": "General purpose IO 0 (SPIBOOT), use 100 kΩ pull-down resistor"+      },+      {+        "number": "34",+        "name": "GPIO1",+        "type": "bidirectional",+        "description": "General purpose IO 1"+      },+      {+        "number": "35",+        "name": "GND",+        "type": "power_in",+        "description": "I/O Ground"+      },+      {+        "number": "36",+        "name": "GPIO4 / I2S LROUT",+        "type": "bidirectional",+        "description": "General purpose IO 4 / I2S LROUT"+      },+      {+        "number": "37",+        "name": "AGND0",+        "type": "power_in",+        "description": "Analog ground, low-noise reference"+      },+      {+        "number": "38",+        "name": "AVDD0",+        "type": "power_in",+        "description": "Analog power supply"+      },+      {+        "number": "39",+        "name": "RIGHT",+        "type": "output",+        "description": "Right channel output"+      },+      {+        "number": "40",+        "name": "AGND1",+        "type": "power_in",+        "description": "Analog ground"+      },+      {+        "number": "41",+        "name": "AGND2",+        "type": "power_in",+        "description": "Analog ground"+      },+      {+        "number": "42",+        "name": "GBUF",+        "type": "output",+        "description": "Common buffer for headphones, do NOT connect to ground!"+      },+      {+        "number": "43",+        "name": "AVDD1",+        "type": "power_in",+        "description": "Analog power supply"+      },+      {+        "number": "44",+        "name": "RCAP",+        "type": "bidirectional",+        "description": "Filtering capacitance for reference"+      },+      {+        "number": "45",+        "name": "AVDD2",+        "type": "power_in",+        "description": "Analog power supply"+      },+      {+        "number": "46",+        "name": "LEFT",+        "type": "output",+        "description": "Left channel output"+      },+      {+        "number": "47",+        "name": "AGND3",+        "type": "power_in",+        "description": "Analog ground"+      },+      {+        "number": "48",+        "name": "LINE2",+        "type": "input",+        "description": "Line-in 2 (right channel)"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 79,+        "cost_usd": 0.7256,+        "at": "2026-09-22T02:52:42"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586171730008150016",+        "pages": 79,+        "sha256": "8b76e79550839a4b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file