← Commit history

Initial commit: component/vrc522

Ray ·008d472409 ·
2 files changed +360
README.mdadded+69
@@ -0,0 +1,69 @@+# VRC522++**VIBRATION** · RFID ICs · VQFN-32-EP(5x5)++VRC522 from VIBRATION, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | I2C | input | I2C interface enable, active high |+| 2 | PVDD | power_in | Pin power supply, 2.0 to 5.5V |+| 3 | DVDD | power_in | Digital power supply, 2.0 to 5.5V |+| 4 | DVSS | power_in | Digital ground |+| 5 | PVSS | power_in | Pin power supply ground |+| 6 | NRSTPD | input | Reset/power-down pin, active low |+| 7 | MFIN | input | Modulation frequency signal input |+| 8 | MFOUT | output | Modulation frequency signal output |+| 9 | SVDD | power_in | Power supply for MFIN and MFOUT, 2.0 to 5.5V |+| 10 | TVSS | power_in | Transmitter ground |+| 11 | TX1 | output | Transmitter 1, outputs modulated 13.56MHz energy carrier signal |+| 12 | TVDD | power_in | Transmitter power supply, 2.0 to 5.5V |+| 13 | TX2 | output | Transmitter 2, outputs modulated 13.56MHz energy carrier signal |+| 14 | TVSS | power_in | Transmitter ground |+| 15 | AVDD | power_in | Analog power supply, 2.0 to 5.5V |+| 16 | VMID | power_in | Internal reference voltage |+| 17 | RX | input | Receiver signal input |+| 18 | AVSS | power_in | Analog ground |+| 19 | AUX1 | output | Test output pin |+| 20 | AUX2 | output | Test output pin |+| 21 | OSCIN | input | External 27.12MHz crystal input or external clock input |+| 22 | OSCOUT | output | External 27.12MHz crystal output |+| 23 | IRQ | output | Interrupt signal output, requires external pull-up |+| 24 | SDA/NSS/RX | bidirectional | Multifunction digital interface: I2C SDA, SPI NSS, or UART RX depending on communication mode |+| 25 | D1/ADR_5 | bidirectional | Parallel data D1 or I2C slave address bit ADR_5 |+| 26 | D2/ADR_4 | bidirectional | Parallel data D2 or I2C slave address bit ADR_4 |+| 27 | D3/ADR_3 | bidirectional | Parallel data D3 or I2C slave address bit ADR_3 |+| 28 | D4/ADR_2 | bidirectional | Parallel data D4 or I2C slave address bit ADR_2 |+| 29 | D5/ADR_1/SCK | bidirectional | Parallel data D5, I2C slave address bit ADR_1, or SPI serial clock depending on communication mode |+| 30 | D6/ADR_0/MOSI | bidirectional | Parallel data D6, I2C slave address bit ADR_0, or SPI master output slave input depending on communication mode |+| 31 | D7/SCL/MISO/TX | bidirectional | Parallel data D7, I2C serial clock, SPI slave output, or UART transmit depending on communication mode |+| 32 | EA | input | I2C address encoding enable |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | VIBRATION |+| Package | VQFN-32-EP(5x5) |+| Category | RF And Wireless |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `VRC522`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [VIBRATION datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918066423586816) (7 pp, sha256 `da42ed28aee92c43`, retrieved 2026-09-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/vrc522-datasheet.pdf)
page.jsonadded+291
@@ -0,0 +1,291 @@+{+  "slug": "vrc522",+  "version": "0.1.0",+  "type": "component",+  "description": "VIBRATION RFID ICs, VQFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "rf and wireless",+    "vrc522",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "vrc522.kicad_sym",+    "vrc522.kicad_mod",+    "vrc522.glb",+    "vrc522.step",+    "vrc522.lbr",+    "docs/hero.png",+    "docs/vrc522-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "VRC522",+    "manufacturer": "VIBRATION",+    "package": "VQFN-32-EP(5x5)",+    "pin_count": 33,+    "category": "RF And Wireless",+    "subcategory": "RFID ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918066423586816",+    "parts": {+      "symbol": "vrc522.kicad_sym",+      "footprint": "vrc522.kicad_mod",+      "model_3d": "vrc522.glb",+      "model_3d_step": "vrc522.step",+      "lbr": "vrc522.lbr"+    },+    "distributor_links": {+      "lcsc": "C968718"+    },+    "pins": [+      {+        "number": "1",+        "name": "I2C",+        "type": "input",+        "description": "I2C interface enable, active high"+      },+      {+        "number": "2",+        "name": "PVDD",+        "type": "power_in",+        "description": "Pin power supply, 2.0 to 5.5V"+      },+      {+        "number": "3",+        "name": "DVDD",+        "type": "power_in",+        "description": "Digital power supply, 2.0 to 5.5V"+      },+      {+        "number": "4",+        "name": "DVSS",+        "type": "power_in",+        "description": "Digital ground"+      },+      {+        "number": "5",+        "name": "PVSS",+        "type": "power_in",+        "description": "Pin power supply ground"+      },+      {+        "number": "6",+        "name": "NRSTPD",+        "type": "input",+        "description": "Reset/power-down pin, active low"+      },+      {+        "number": "7",+        "name": "MFIN",+        "type": "input",+        "description": "Modulation frequency signal input"+      },+      {+        "number": "8",+        "name": "MFOUT",+        "type": "output",+        "description": "Modulation frequency signal output"+      },+      {+        "number": "9",+        "name": "SVDD",+        "type": "power_in",+        "description": "Power supply for MFIN and MFOUT, 2.0 to 5.5V"+      },+      {+        "number": "10",+        "name": "TVSS",+        "type": "power_in",+        "description": "Transmitter ground"+      },+      {+        "number": "11",+        "name": "TX1",+        "type": "output",+        "description": "Transmitter 1, outputs modulated 13.56MHz energy carrier signal"+      },+      {+        "number": "12",+        "name": "TVDD",+        "type": "power_in",+        "description": "Transmitter power supply, 2.0 to 5.5V"+      },+      {+        "number": "13",+        "name": "TX2",+        "type": "output",+        "description": "Transmitter 2, outputs modulated 13.56MHz energy carrier signal"+      },+      {+        "number": "14",+        "name": "TVSS",+        "type": "power_in",+        "description": "Transmitter ground"+      },+      {+        "number": "15",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog power supply, 2.0 to 5.5V"+      },+      {+        "number": "16",+        "name": "VMID",+        "type": "power_in",+        "description": "Internal reference voltage"+      },+      {+        "number": "17",+        "name": "RX",+        "type": "input",+        "description": "Receiver signal input"+      },+      {+        "number": "18",+        "name": "AVSS",+        "type": "power_in",+        "description": "Analog ground"+      },+      {+        "number": "19",+        "name": "AUX1",+        "type": "output",+        "description": "Test output pin"+      },+      {+        "number": "20",+        "name": "AUX2",+        "type": "output",+        "description": "Test output pin"+      },+      {+        "number": "21",+        "name": "OSCIN",+        "type": "input",+        "description": "External 27.12MHz crystal input or external clock input"+      },+      {+        "number": "22",+        "name": "OSCOUT",+        "type": "output",+        "description": "External 27.12MHz crystal output"+      },+      {+        "number": "23",+        "name": "IRQ",+        "type": "output",+        "description": "Interrupt signal output, requires external pull-up"+      },+      {+        "number": "24",+        "name": "SDA/NSS/RX",+        "type": "bidirectional",+        "description": "Multifunction digital interface: I2C SDA, SPI NSS, or UART RX depending on communication mode"+      },+      {+        "number": "25",+        "name": "D1/ADR_5",+        "type": "bidirectional",+        "description": "Parallel data D1 or I2C slave address bit ADR_5"+      },+      {+        "number": "26",+        "name": "D2/ADR_4",+        "type": "bidirectional",+        "description": "Parallel data D2 or I2C slave address bit ADR_4"+      },+      {+        "number": "27",+        "name": "D3/ADR_3",+        "type": "bidirectional",+        "description": "Parallel data D3 or I2C slave address bit ADR_3"+      },+      {+        "number": "28",+        "name": "D4/ADR_2",+        "type": "bidirectional",+        "description": "Parallel data D4 or I2C slave address bit ADR_2"+      },+      {+        "number": "29",+        "name": "D5/ADR_1/SCK",+        "type": "bidirectional",+        "description": "Parallel data D5, I2C slave address bit ADR_1, or SPI serial clock depending on communication mode"+      },+      {+        "number": "30",+        "name": "D6/ADR_0/MOSI",+        "type": "bidirectional",+        "description": "Parallel data D6, I2C slave address bit ADR_0, or SPI master output slave input depending on communication mode"+      },+      {+        "number": "31",+        "name": "D7/SCL/MISO/TX",+        "type": "bidirectional",+        "description": "Parallel data D7, I2C serial clock, SPI slave output, or UART transmit depending on communication mode"+      },+      {+        "number": "32",+        "name": "EA",+        "type": "input",+        "description": "I2C address encoding enable"+      },+      {+        "number": "33",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 33 (exposed pad) is referenced in the application circuit section (page 4) as 'pin33 是指芯片底部的大焊盘,",+          "exposed pad 33 added from the footprint"+        ],+        "pages_sent": 7,+        "cost_usd": 0.4614,+        "at": "2026-09-17T18:44:11"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918066423586816",+        "pages": 7,+        "sha256": "da42ed28aee92c43",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 33,+        "described": 33,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file