component
VNL5090S5TR-E
Public Made by Adomby adom
STMicroelectronics Power Distribution Switches, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -38,13 +38,13 @@ "number": "2", "name": "INPUT", "type": "input",- "description": "Voltage-controlled CMOS-compatible logic input with hysteresis that turns the power MOSFET ON/OFF. VIL \u2264 0.9 V, VIH \u2265 2.1 V; internally clamped. Drive through a 10 k\u03a9 series resistor for MCU I/O protection; do not leave floating (connect to GND through 10 k\u03a9 if unused)."+ "description": "Voltage-controlled CMOS-compatible logic input with hysteresis that turns the power MOSFET ON/OFF. VIL ≤ 0.9 V, VIH ≥ 2.1 V; internally clamped. Drive through a 10 kΩ series resistor for MCU I/O protection; do not leave floating (connect to GND through 10 kΩ if unused)." }, { "number": "3", "name": "STATUS", "type": "output",- "description": "Open-drain digital diagnostic output. Pulled low (VSTAT \u2264 0.5 V at 1 mA) to signal fault/off-state open-load conditions; requires an external pull-up to the logic supply. May be left floating if unused (must not be tied directly to GND)."+ "description": "Open-drain digital diagnostic output. Pulled low (VSTAT ≤ 0.5 V at 1 mA) to signal fault/off-state open-load conditions; requires an external pull-up to the logic supply. May be left floating if unused (must not be tied directly to GND)." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "DRAIN", "type": "power_out",- "description": "Power MOSFET drain (load-side output). Internally clamped drain-source voltage ~46 V (41-52 V), RDS(on) \u2248 90 m\u03a9 @ 25 \u00b0C, current-limited output rated for 13 A DC drain current. Pin 5 and pin 8 are the two DRAIN pins on the SO-8 and should be paralleled and tied to a copper area for heat sinking."+ "description": "Power MOSFET drain (load-side output). Internally clamped drain-source voltage ~46 V (41-52 V), RDS(on) ≈ 90 mΩ @ 25 °C, current-limited output rated for 13 A DC drain current. Pin 5 and pin 8 are the two DRAIN pins on the SO-8 and should be paralleled and tied to a copper area for heat sinking." }, { "number": "6",@@ -156,5 +156,8 @@ "docs/vnl5090s5tr-e-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }