component
VA2101CSG9
Public Made by Adomby adom
VIVA(昱盛) Audio Amplifiers, WLCSP-9. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+1605
README.mdadded+79@@ -0,0 +1,79 @@+# VA2101CSG9++**VIVA(昱盛)** · Audio Amplifiers · WLCSP-9++VA2101CSG9 from VIVA(昱盛), in a WLCSP-9. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| A1 | INP | input | Positive audio signal input of the differential pair; the datasheet limits its input voltage to 0 to VDD. |+| C1 | INN | input | Negative audio signal input of the differential pair; the datasheet limits its input voltage to 0 to VDD. |+| C2 | SD_B | input | Active-low shutdown control; it should be held high during normal operation, and pulling it low or leaving it floating mutes the outputs and puts the amplifier in its low-current state. |+| C3 | OUTP | output | Positive BTL (bridge-tied load) output, which drives the speaker together with OUTN. |+| A3 | OUTN | output | Negative BTL (bridge-tied load) output, which drives the speaker together with OUTP. |+| B1 | VDD | power_in | Power supply pin; the supply range is 2.8 V to 5.5 V and this pin is one of two VDD balls that must be decoupled close to the package. |+| B2 | VDD | power_in | Power supply pin; the supply range is 2.8 V to 5.5 V and this pin is one of two VDD balls that must be decoupled close to the package. |+| A2 | GND | power_in | Power ground pin for the amplifier output stage and supply return. |+| B3 | GND | power_in | Power ground pin for the amplifier output stage and supply return. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | VIVA(昱盛) |+| Package | WLCSP-9 |+| Category | Amplifiers/Comparators |+| Pins | 9 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Supply voltage (absolute) | VDD | -0.3 | | 6 | V | | 3 |+| Input voltage | VI | 0 | | | V | RINN, RINP, LINN, LINP, SD_B; printed as 0 to VDD (max not numeric) | 3 |+| Operating free-air temperature range | TA | -40 | | 85 | oC | | 3 |+| Operating junction temperature range | TJ | -40 | | 150 | oC | Footnote (*2) applies as printed | 3 |+| Storage temperature range | TSTG | -65 | | 150 | oC | | 3 |+| Minimum load resistance | R(LOAD) | 3 | | | Ω | | 3 |+| Electrostatic discharge, human body model | | -2 | | 2 | kV | Human body model; printed ±2 kV | 3 |+| Electrostatic discharge, machine model | | -200 | | 200 | V | Machine model; printed ±200 V | 3 |+| Supply voltage (operating) | VDD | 2.8 | | 5.5 | V | | 3 |+| High level input voltage (SD_B) | VIH | 2 | | | V | SD_B; VDD=5V; printed max is VDD (not numeric) | 3 |+| Low level input voltage (SD_B) | VIL | | | 0.4 | V | SD_B; VDD=5V | 3 |+| External input resistor | RI | 15 | | | kΩ | GAIN≤20V/V | 3 |+| PWM carrier frequency | fOSC | 220 | | 300 | kHz | VDD=5V | 3 |+| Common mode input voltage range | VIC | 0.5 | | | V | VDD=2.8V~5.5V, CMRR≤-49dB; printed max is VDD-0.8 (not numeric) | 3 |+| Output offset voltage (measured differentially) | /VOS/ | | 1 | 25 | mV | VI=0V, AV=20dB, RL=8Ω | 4 |+| High-level input current | /IIH/ | | | 100 | μA | VDD=5.5V, VI=5.8V | 4 |+| Low-level input current | /IIL/ | | | 5 | μA | VDD=5.5V, VI=-0.3V | 4 |+| DC supply rejection ratio | /PSRR/ | 55 | 75 | | dB | VDD=4.5V to 5.5V, Gain=20dB | 4 |+| Common mode rejection ratio | /CMRR/ | 49 | 68 | | dB | VDD = 2.8 to 5.5V, VIC = 0.5V to VDD-0.8V | 4 |+| Quiescent current | IDD | | 5 | 6.2 | mA | VDD=5.5V, no load | 4 |+| Quiescent current | IDD | | 4 | 5 | mA | VDD=3.6V | 4 |+| Quiescent current | IDD | | 3.5 | 4 | mA | VDD=3.0V | 4 |+| Supply current in shutdown mode | IDD(SHUTDOWN) | | 0.5 | 2 | μA | SD_B=0.4V, VDD=2.8V~5.5V | 4 |+| Drain-source ON resistance, high side | RDS(ON) | | 450 | 600 | mΩ | VDD=5V, IOUT=500mA | 4 |+| Drain-source ON resistance, low side | RDS(ON) | | 450 | 600 | mΩ | VDD=5V, IOUT=500mA | 4 |+| Amplifier gain (printed as 285k/RI, 300k/RI, 325k/RI) | A | 285 | 300 | 325 | kΩ/RI | VDD = 2.8 to 5.5V; gain in V/V equals printed value divided by RI | 4 |+| Input impedance | ZI | 141 | 150 | 159 | kΩ | | 5 |++## CAD (KiCad official)++- Symbol: `VA2101CSG9`+- Footprint: `Package_CSP:WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm`+- 3D model: WLCSP-9 (KiCad packages3D, STEP)+- 3D model files: `va2101csg9-etched.step` / `va2101csg9-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `va2101csg9.step` / `va2101csg9.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [VIVA(昱盛) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602767272217747456) (15 pp, sha256 `fe1091f67289e19f`, retrieved 2026-10-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/va2101csg9-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/va2101csg9-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+198@@ -0,0 +1,198 @@+{+ "slug": "va2101csg9",+ "version": "0.1.0",+ "type": "component",+ "description": "VIVA(昱盛) Audio Amplifiers, WLCSP-9. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "va2101csg9",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "va2101csg9.kicad_sym",+ "va2101csg9.kicad_mod",+ "va2101csg9.glb",+ "va2101csg9.step",+ "va2101csg9.lbr",+ "docs/hero.png",+ "docs/va2101csg9-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "va2101csg9-hero.glb",+ "va2101csg9-hero.overlay.json",+ "va2101csg9-etched.glb"+ ],+ "component": {+ "mpn": "VA2101CSG9",+ "manufacturer": "VIVA(昱盛)",+ "package": "WLCSP-9",+ "pin_count": 9,+ "category": "Amplifiers/Comparators",+ "subcategory": "Audio Amplifiers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602767272217747456",+ "parts": {+ "symbol": "va2101csg9.kicad_sym",+ "footprint": "va2101csg9.kicad_mod",+ "model_3d": "va2101csg9-hero.glb",+ "model_3d_plain": "va2101csg9-etched.glb",+ "model_3d_step": "va2101csg9-etched.step",+ "model_3d_step_plain": "va2101csg9.step",+ "lbr": "va2101csg9.lbr"+ },+ "distributor_links": {+ "lcsc": "C19673790"+ },+ "distributor_check": {+ "checked_at": "2026-10-18T18:13:47Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "quota"+ },+ "mouser": {+ "pn": null,+ "status": "quota"+ }+ },+ "pins": [+ {+ "number": "A1",+ "name": "INP",+ "type": "input",+ "description": "Positive audio signal input of the differential pair; the datasheet limits its input voltage to 0 to VDD."+ },+ {+ "number": "C1",+ "name": "INN",+ "type": "input",+ "description": "Negative audio signal input of the differential pair; the datasheet limits its input voltage to 0 to VDD."+ },+ {+ "number": "C2",+ "name": "SD_B",+ "type": "input",+ "description": "Active-low shutdown control; it should be held high during normal operation, and pulling it low or leaving it floating mutes the outputs and puts the amplifier in its low-current state."+ },+ {+ "number": "C3",+ "name": "OUTP",+ "type": "output",+ "description": "Positive BTL (bridge-tied load) output, which drives the speaker together with OUTN."+ },+ {+ "number": "A3",+ "name": "OUTN",+ "type": "output",+ "description": "Negative BTL (bridge-tied load) output, which drives the speaker together with OUTP."+ },+ {+ "number": "B1",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply pin; the supply range is 2.8 V to 5.5 V and this pin is one of two VDD balls that must be decoupled close to the package."+ },+ {+ "number": "B2",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply pin; the supply range is 2.8 V to 5.5 V and this pin is one of two VDD balls that must be decoupled close to the package."+ },+ {+ "number": "A2",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground pin for the amplifier output stage and supply return."+ },+ {+ "number": "B3",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground pin for the amplifier output stage and supply return."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet pinout is for the WLCSP-9 only, which matches the MPN suffix CS (WLCSP 1.06 x 1.09) in; The VDD and GND descriptions use the supply range and decoupling guidance from pages 3 and 9. The da"+ ],+ "pages_sent": 15,+ "cost_usd": 0.0548,+ "at": "2026-10-18T18:13:33"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602767272217747456",+ "pages": 15,+ "sha256": "fe1091f67289e19f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "va2101csg9.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.21,+ 1.22,+ 0.609+ ],+ "zmin_mm": -0.007,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "2761b77e9764240fbf79c91412b2bd127e1a30cb1a2103ceae4ce4c1a86308df",+ "checked": "2026-10-18",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "va2101csg9-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.21,+ 1.22,+ 0.609+ ],+ "zmin_mm": -0.007,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "cf0104c29598e0bea3af758d398cb881933fc8bfcbf6fb81158c38ad649fa6d0",+ "checked": "2026-10-18",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+204@@ -0,0 +1,204 @@+{+ "slug": "va2101csg9",+ "version": "0.1.0",+ "type": "component",+ "description": "VIVA(昱盛) Audio Amplifiers, WLCSP-9. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "va2101csg9",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "va2101csg9.kicad_sym",+ "va2101csg9.kicad_mod",+ "va2101csg9.glb",+ "va2101csg9.step",+ "va2101csg9.lbr",+ "docs/hero.png",+ "docs/va2101csg9-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "va2101csg9-hero.glb",+ "va2101csg9-hero.overlay.json",+ "va2101csg9-etched.glb"+ ],+ "component": {+ "mpn": "VA2101CSG9",+ "manufacturer": "VIVA(昱盛)",+ "package": "WLCSP-9",+ "pin_count": 9,+ "category": "Amplifiers/Comparators",+ "subcategory": "Audio Amplifiers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602767272217747456",+ "parts": {+ "symbol": "va2101csg9.kicad_sym",+ "footprint": "va2101csg9.kicad_mod",+ "model_3d": "va2101csg9-hero.glb",+ "model_3d_plain": "va2101csg9-etched.glb",+ "model_3d_step": "va2101csg9-etched.step",+ "model_3d_step_plain": "va2101csg9.step",+ "lbr": "va2101csg9.lbr"+ },+ "distributor_links": {+ "lcsc": "C19673790"+ },+ "distributor_check": {+ "checked_at": "2026-10-18T18:13:47Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "quota"+ },+ "mouser": {+ "pn": null,+ "status": "quota"+ }+ },+ "pins": [+ {+ "number": "A1",+ "name": "INP",+ "type": "input",+ "description": "Positive audio signal input of the differential pair; the datasheet limits its input voltage to 0 to VDD."+ },+ {+ "number": "C1",+ "name": "INN",+ "type": "input",+ "description": "Negative audio signal input of the differential pair; the datasheet limits its input voltage to 0 to VDD."+ },+ {+ "number": "C2",+ "name": "SD_B",+ "type": "input",+ "description": "Active-low shutdown control; it should be held high during normal operation, and pulling it low or leaving it floating mutes the outputs and puts the amplifier in its low-current state."+ },+ {+ "number": "C3",+ "name": "OUTP",+ "type": "output",+ "description": "Positive BTL (bridge-tied load) output, which drives the speaker together with OUTN."+ },+ {+ "number": "A3",+ "name": "OUTN",+ "type": "output",+ "description": "Negative BTL (bridge-tied load) output, which drives the speaker together with OUTP."+ },+ {+ "number": "B1",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply pin; the supply range is 2.8 V to 5.5 V and this pin is one of two VDD balls that must be decoupled close to the package."+ },+ {+ "number": "B2",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply pin; the supply range is 2.8 V to 5.5 V and this pin is one of two VDD balls that must be decoupled close to the package."+ },+ {+ "number": "A2",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground pin for the amplifier output stage and supply return."+ },+ {+ "number": "B3",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground pin for the amplifier output stage and supply return."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet pinout is for the WLCSP-9 only, which matches the MPN suffix CS (WLCSP 1.06 x 1.09) in; The VDD and GND descriptions use the supply range and decoupling guidance from pages 3 and 9. The da"+ ],+ "pages_sent": 15,+ "cost_usd": 0.0548,+ "at": "2026-10-18T18:13:33"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602767272217747456",+ "pages": 15,+ "sha256": "fe1091f67289e19f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "va2101csg9.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.21,+ 1.22,+ 0.609+ ],+ "zmin_mm": -0.007,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "2761b77e9764240fbf79c91412b2bd127e1a30cb1a2103ceae4ce4c1a86308df",+ "checked": "2026-10-18",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "va2101csg9-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.21,+ 1.22,+ 0.609+ ],+ "zmin_mm": -0.007,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "cf0104c29598e0bea3af758d398cb881933fc8bfcbf6fb81158c38ad649fa6d0",+ "checked": "2026-10-18",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
va2101csg9-etched.glbadded⋯ 1 unchanged line ⋯
va2101csg9-hero.glbadded⋯ 1 unchanged line ⋯
va2101csg9-hero.overlay.jsonadded+282@@ -0,0 +1,282 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "VA2101CSG9",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 9,+ "span_mm": 1.0,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 5,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "A1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 9,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.25,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -0.519,+ 0.519,+ -0.52,+ 0.52+ ],+ "pads_bbox_mm": [+ -0.5,+ 0.5,+ -0.5,+ 0.5+ ],+ "seating_z_mm": -0.007+ },+ "sources": {+ "glb": "va2101csg9-etched.glb",+ "glb_sha256": "36566252eb9df247338896390df55f5e48bc4399d2fe37b41e71fbaef1eb5a5d",+ "footprint": "va2101csg9.kicad_mod",+ "footprint_sha256": "c17b99276873980c2058ef36c9bbee0f4bd4f646fd86821472644d44bd6d9a33",+ "pins": "page.json component.pins",+ "pins_sha256": "79ed73ae8db4991964bfde796ff24cb723346a170b933091a36053c321f190ab"+ },+ "generator": "adom-wiki 1.7.73 (component_hero)",+ "labels": [+ {+ "pad": "A1",+ "text": "INP",+ "x": -0.6,+ "y": -0.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "A2",+ "text": "GND",+ "x": 0.0,+ "y": -0.6,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "A3",+ "text": "OUTN",+ "x": 0.6,+ "y": -0.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "B1",+ "text": "VDD",+ "x": -0.6,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "B2",+ "text": "VDD",+ "x": 0.2,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "B3",+ "text": "GND",+ "x": 0.6,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "C1",+ "text": "INN",+ "x": -0.6,+ "y": 0.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "C2",+ "text": "SD_B",+ "x": 0.0,+ "y": 0.6,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "C3",+ "text": "OUTP",+ "x": 0.6,+ "y": 0.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ }+ ],+ "pads": [+ {+ "number": "A1",+ "shape": "circle",+ "center_mm": [+ -0.4,+ -0.4+ ],+ "size_mm": [+ 0.2,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "A2",+ "shape": "circle",+ "center_mm": [+ 0.0,+ -0.4+ ],+ "size_mm": [+ 0.2,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "A3",+ "shape": "circle",+ "center_mm": [+ 0.4,+ -0.4+ ],+ "size_mm": [+ 0.2,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "B1",+ "shape": "circle",+ "center_mm": [+ -0.4,+ 0.0+ ],+ "size_mm": [+ 0.2,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "B2",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 0.2,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "B3",+ "shape": "circle",+ "center_mm": [+ 0.4,+ 0.0+ ],+ "size_mm": [+ 0.2,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "C1",+ "shape": "circle",+ "center_mm": [+ -0.4,+ 0.4+ ],+ "size_mm": [+ 0.2,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "C2",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 0.4+ ],+ "size_mm": [+ 0.2,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "C3",+ "shape": "circle",+ "center_mm": [+ 0.4,+ 0.4+ ],+ "size_mm": [+ 0.2,+ 0.2+ ],+ "rot": 0.0+ }+ ]+}
va2101csg9.glbadded⋯ 1 unchanged line ⋯
va2101csg9.kicad_modadded+216@@ -0,0 +1,216 @@+(footprint "WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "WLCSP-9, 1.21x1.22mm, 9 Ball, 3x3 Layout, 0.4mm Pitch, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/wlcspcb/cb_9_3.pdf")+ (tags "CSP 9 0.4")+ (property "Reference" "REF**"+ (at 0 -1.61 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm"+ (at 0 1.61 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/grid_array"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -0.76 0.76)+ (end -0.76 -0.435)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -0.435 -0.76)+ (end 0.76 -0.76)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 0.76 -0.76)+ (end 0.76 0.76)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 0.76 0.76)+ (end -0.76 0.76)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -0.76 -0.76)+ (xy -1.26 -0.76)+ (xy -0.76 -1.26)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -0.605 -0.3075)+ (end -0.3025 -0.61)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -0.605 0.61)+ (end -0.605 -0.3075)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -0.3025 -0.61)+ (end 0.605 -0.61)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start 0.605 -0.61)+ (end 0.605 0.61)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start 0.605 0.61)+ (end -0.605 0.61)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 -90)+ (layer "F.Fab")+ (effects+ (font+ (size 0.28 0.28)+ (thickness 0.042)+ )+ )+ )+ (pad "A1" smd circle+ (at -0.4 -0.4)+ (size 0.2 0.2)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ )+ (pad "A2" smd circle+ (at 0 -0.4)+ (size 0.2 0.2)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ )+ (pad "A3" smd circle+ (at 0.4 -0.4)+ (size 0.2 0.2)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ )+ (pad "B1" smd circle+ (at -0.4 0)+ (size 0.2 0.2)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ )+ (pad "B2" smd circle+ (at 0 0)+ (size 0.2 0.2)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ )+ (pad "B3" smd circle+ (at 0.4 0)+ (size 0.2 0.2)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ )+ (pad "C1" smd circle+ (at -0.4 0.4)+ (size 0.2 0.2)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ )+ (pad "C2" smd circle+ (at 0 0.4)+ (size 0.2 0.2)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ )+ (pad "C3" smd circle+ (at 0.4 0.4)+ (size 0.2 0.2)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_CSP.3dshapes/WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+ (fp_poly+ (pts (xy -0.86 -0.86) (xy 0.86 -0.86) (xy 0.86 0.86) (xy -0.86 0.86))+ (stroke (width 0.05) (type solid))+ (fill no)+ (layer "F.CrtYd")+ )+)
va2101csg9.kicad_symadded+49@@ -0,0 +1,49 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "VA2101CSG9" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 10.16 0) (effects (font (size 1.27 1.27))))+ (property "Value" "VA2101CSG9" (at 0 -10.16 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "VA2101CSG9_0_1"+ (rectangle (start -12.70 7.62) (end 12.70 -7.62)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "VA2101CSG9_1_1"+ (pin input line (at -17.78 5.08 0) (length 5.08)+ (name "INP" (effects (font (size 1.27 1.27))))+ (number "A1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 2.54 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "A2" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 0.00 0) (length 5.08)+ (name "OUTN" (effects (font (size 1.27 1.27))))+ (number "A3" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "VDD" (effects (font (size 1.27 1.27))))+ (number "B1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -5.08 0) (length 5.08)+ (name "VDD" (effects (font (size 1.27 1.27))))+ (number "B2" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 2.54 180) (length 5.08)+ (name "OUTP" (effects (font (size 1.27 1.27))))+ (number "C3" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 0.00 180) (length 5.08)+ (name "SD_B" (effects (font (size 1.27 1.27))))+ (number "C2" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -2.54 180) (length 5.08)+ (name "INN" (effects (font (size 1.27 1.27))))+ (number "C1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -5.08 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "B3" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
va2101csg9.lbradded+129@@ -0,0 +1,129 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm">+ <description>WLCSP-9, 1.21 x 1.22 mm, 0.4 mm pitch. WLCSP-9, 1.21x1.22mm, 9 Ball, 3x3 Layout, 0.4mm Pitch</description>+ <smd name="A1" x="-0.4000" y="0.4000" dx="0.2000" dy="0.2000" layer="1" roundness="100"/>+ <smd name="A2" x="0.0000" y="0.4000" dx="0.2000" dy="0.2000" layer="1" roundness="100"/>+ <smd name="A3" x="0.4000" y="0.4000" dx="0.2000" dy="0.2000" layer="1" roundness="100"/>+ <smd name="B1" x="-0.4000" y="-0.0000" dx="0.2000" dy="0.2000" layer="1" roundness="100"/>+ <smd name="B2" x="0.0000" y="-0.0000" dx="0.2000" dy="0.2000" layer="1" roundness="100"/>+ <smd name="B3" x="0.4000" y="-0.0000" dx="0.2000" dy="0.2000" layer="1" roundness="100"/>+ <smd name="C1" x="-0.4000" y="-0.4000" dx="0.2000" dy="0.2000" layer="1" roundness="100"/>+ <smd name="C2" x="0.0000" y="-0.4000" dx="0.2000" dy="0.2000" layer="1" roundness="100"/>+ <smd name="C3" x="0.4000" y="-0.4000" dx="0.2000" dy="0.2000" layer="1" roundness="100"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-0.7600" y="0.7600"/>+ <vertex x="-1.2600" y="0.7600"/>+ <vertex x="-0.7600" y="1.2600"/>+ </polygon>+ <wire x1="-0.7600" y1="-0.7600" x2="-0.7600" y2="0.4350" width="0.1200" layer="21"/>+ <wire x1="-0.4350" y1="0.7600" x2="0.7600" y2="0.7600" width="0.1200" layer="21"/>+ <wire x1="0.7600" y1="0.7600" x2="0.7600" y2="-0.7600" width="0.1200" layer="21"/>+ <wire x1="0.7600" y1="-0.7600" x2="-0.7600" y2="-0.7600" width="0.1200" layer="21"/>+ <wire x1="-0.6050" y1="0.3075" x2="-0.3025" y2="0.6100" width="0.1000" layer="51"/>+ <wire x1="-0.6050" y1="-0.6100" x2="-0.6050" y2="0.3075" width="0.1000" layer="51"/>+ <wire x1="-0.3025" y1="0.6100" x2="0.6050" y2="0.6100" width="0.1000" layer="51"/>+ <wire x1="0.6050" y1="0.6100" x2="0.6050" y2="-0.6100" width="0.1000" layer="51"/>+ <wire x1="0.6050" y1="-0.6100" x2="-0.6050" y2="-0.6100" width="0.1000" layer="51"/>+ <text x="0" y="1.360" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-1.360" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="VA2101CSG9">+ <wire x1="-12.7" y1="7.62" x2="12.7" y2="7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="7.62" x2="12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="7.62" width="0.254" layer="94"/>+ <text x="0.0000" y="10.1600" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="INP" x="-17.78" y="5.08" length="middle" direction="in"/>+ <pin name="GND" x="-17.78" y="2.54" length="middle" direction="pwr"/>+ <pin name="OUTN" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="VDD" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="VDD@2" x="-17.78" y="-5.08" length="middle" direction="pwr"/>+ <pin name="OUTP" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>+ <pin name="SD_B" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+ <pin name="INN" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+ <pin name="GND@2" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="VA2101CSG9" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="VA2101CSG9" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm">+ <connects>+ <connect gate="G$1" pin="INP" pad="A1"/>+ <connect gate="G$1" pin="GND" pad="A2"/>+ <connect gate="G$1" pin="OUTN" pad="A3"/>+ <connect gate="G$1" pin="VDD" pad="B1"/>+ <connect gate="G$1" pin="VDD@2" pad="B2"/>+ <connect gate="G$1" pin="OUTP" pad="C3"/>+ <connect gate="G$1" pin="SD_B" pad="C2"/>+ <connect gate="G$1" pin="INN" pad="C1"/>+ <connect gate="G$1" pin="GND@2" pad="B3"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
va2101csg9.stepadded+446@@ -0,0 +1,446 @@+ISO-10303-21;+HEADER;+/* WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2026, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm','WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#343);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#46,#66,#89,#103,#194,#201,#219,#234,#247,#260,#273,#286,#299,#312,#325,#338));+#17=ADVANCED_FACE('',(#18),#43,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#28,#35,#40));+#20=ORIENTED_EDGE('',*,*,#21,.F.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-0.605,-0.61,0.2));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(-0.605,-0.61,0.6));+#26=LINE('',#23,#27);+#27=VECTOR('',#13,1.);+#28=ORIENTED_EDGE('',*,*,#29,.T.);+#29=EDGE_CURVE('',#22,#30,#32,.T.);+#30=VERTEX_POINT('',#31);+#31=CARTESIAN_POINT('',(-0.605,0.61,0.2));+#32=LINE('',#23,#33);+#33=VECTOR('',#34,1.);+#34=DIRECTION('',(0.,1.,0.));+#35=ORIENTED_EDGE('',*,*,#36,.T.);+#36=EDGE_CURVE('',#30,#37,#39,.T.);+#37=VERTEX_POINT('',#38);+#38=CARTESIAN_POINT('',(-0.605,0.61,0.6));+#39=LINE('',#31,#27);+#40=ORIENTED_EDGE('',*,*,#41,.F.);+#41=EDGE_CURVE('',#24,#37,#42,.T.);+#42=LINE('',#25,#33);+#43=PLANE('',#44);+#44=AXIS2_PLACEMENT_3D('',#23,#45,#13);+#45=DIRECTION('',(1.,0.,0.));+#46=ADVANCED_FACE('',(#47),#64,.F.);+#47=FACE_BOUND('',#48,.F.);+#48=EDGE_LOOP('',(#49,#55,#56,#61));+#49=ORIENTED_EDGE('',*,*,#50,.F.);+#50=EDGE_CURVE('',#22,#51,#53,.T.);+#51=VERTEX_POINT('',#52);+#52=CARTESIAN_POINT('',(0.605,-0.61,0.2));+#53=LINE('',#23,#54);+#54=VECTOR('',#45,1.);+#55=ORIENTED_EDGE('',*,*,#21,.T.);+#56=ORIENTED_EDGE('',*,*,#57,.T.);+#57=EDGE_CURVE('',#24,#58,#60,.T.);+#58=VERTEX_POINT('',#59);+#59=CARTESIAN_POINT('',(0.605,-0.61,0.6));+#60=LINE('',#25,#54);+#61=ORIENTED_EDGE('',*,*,#62,.F.);+#62=EDGE_CURVE('',#51,#58,#63,.T.);+#63=LINE('',#52,#27);+#64=PLANE('',#65);+#65=AXIS2_PLACEMENT_3D('',#23,#34,#13);+#66=ADVANCED_FACE('',(#67,#77),#87,.T.);+#67=FACE_BOUND('',#68,.T.);+#68=EDGE_LOOP('',(#40,#56,#69,#74));+#69=ORIENTED_EDGE('',*,*,#70,.T.);+#70=EDGE_CURVE('',#58,#71,#73,.T.);+#71=VERTEX_POINT('',#72);+#72=CARTESIAN_POINT('',(0.605,0.61,0.6));+#73=LINE('',#59,#33);+#74=ORIENTED_EDGE('',*,*,#75,.F.);+#75=EDGE_CURVE('',#37,#71,#76,.T.);+#76=LINE('',#38,#54);+#77=FACE_BOUND('',#78,.T.);+#78=EDGE_LOOP('',(#79));+#79=ORIENTED_EDGE('',*,*,#80,.T.);+#80=EDGE_CURVE('',#81,#81,#83,.T.);+#81=VERTEX_POINT('',#82);+#82=CARTESIAN_POINT('',(-0.422,0.488,0.6));+#83=CIRCLE('',#84,6.1E-02);+#84=AXIS2_PLACEMENT_3D('',#85,#86,#45);+#85=CARTESIAN_POINT('',(-0.483,0.488,0.6));+#86=DIRECTION('',(0.,0.,-1.));+#87=PLANE('',#88);+#88=AXIS2_PLACEMENT_3D('',#25,#13,#45);+#89=ADVANCED_FACE('',(#90),#101,.T.);+#90=FACE_BOUND('',#91,.T.);+#91=EDGE_LOOP('',(#92,#35,#97,#98));+#92=ORIENTED_EDGE('',*,*,#93,.F.);+#93=EDGE_CURVE('',#30,#94,#96,.T.);+#94=VERTEX_POINT('',#95);+#95=CARTESIAN_POINT('',(0.605,0.61,0.2));+#96=LINE('',#31,#54);+#97=ORIENTED_EDGE('',*,*,#75,.T.);+#98=ORIENTED_EDGE('',*,*,#99,.F.);+#99=EDGE_CURVE('',#94,#71,#100,.T.);+#100=LINE('',#95,#27);+#101=PLANE('',#102);+#102=AXIS2_PLACEMENT_3D('',#31,#34,#13);+#103=ADVANCED_FACE('',(#104,#111,#120,#129,#138,#147,#156,#165,#174,#183),#192,.F.);+#104=FACE_BOUND('',#105,.F.);+#105=EDGE_LOOP('',(#106,#107,#108,#92));+#106=ORIENTED_EDGE('',*,*,#29,.F.);+#107=ORIENTED_EDGE('',*,*,#50,.T.);+#108=ORIENTED_EDGE('',*,*,#109,.T.);+#109=EDGE_CURVE('',#51,#94,#110,.T.);+#110=LINE('',#52,#33);+#111=FACE_BOUND('',#112,.F.);+#112=EDGE_LOOP('',(#113));+#113=ORIENTED_EDGE('',*,*,#114,.F.);+#114=EDGE_CURVE('',#115,#115,#117,.T.);+#115=VERTEX_POINT('',#116);+#116=CARTESIAN_POINT('',(-0.276603157962,-0.4,0.2));+#117=CIRCLE('',#118,0.123396842038);+#118=AXIS2_PLACEMENT_3D('',#119,#13,#14);+#119=CARTESIAN_POINT('',(-0.4,-0.4,0.2));+#120=FACE_BOUND('',#121,.F.);+#121=EDGE_LOOP('',(#122));+#122=ORIENTED_EDGE('',*,*,#123,.F.);+#123=EDGE_CURVE('',#124,#124,#126,.T.);+#124=VERTEX_POINT('',#125);+#125=CARTESIAN_POINT('',(-0.276603157962,-3.022350952539E-17,0.2));+#126=CIRCLE('',#127,0.123396842038);+#127=AXIS2_PLACEMENT_3D('',#128,#13,#14);+#128=CARTESIAN_POINT('',(-0.4,0.,0.2));+#129=FACE_BOUND('',#130,.F.);+#130=EDGE_LOOP('',(#131));+#131=ORIENTED_EDGE('',*,*,#132,.F.);+#132=EDGE_CURVE('',#133,#133,#135,.T.);+#133=VERTEX_POINT('',#134);+#134=CARTESIAN_POINT('',(0.123396842038,-0.4,0.2));+#135=CIRCLE('',#136,0.123396842038);+#136=AXIS2_PLACEMENT_3D('',#137,#13,#14);+#137=CARTESIAN_POINT('',(0.,-0.4,0.2));+#138=FACE_BOUND('',#139,.F.);+#139=EDGE_LOOP('',(#140));+#140=ORIENTED_EDGE('',*,*,#141,.F.);+#141=EDGE_CURVE('',#142,#142,#144,.T.);+#142=VERTEX_POINT('',#143);+#143=CARTESIAN_POINT('',(0.523396842038,-0.4,0.2));+#144=CIRCLE('',#145,0.123396842038);+#145=AXIS2_PLACEMENT_3D('',#146,#13,#14);+#146=CARTESIAN_POINT('',(0.4,-0.4,0.2));+#147=FACE_BOUND('',#148,.F.);+#148=EDGE_LOOP('',(#149));+#149=ORIENTED_EDGE('',*,*,#150,.F.);+#150=EDGE_CURVE('',#151,#151,#153,.T.);+#151=VERTEX_POINT('',#152);+#152=CARTESIAN_POINT('',(0.123396842038,-3.022350952539E-17,0.2));+#153=CIRCLE('',#154,0.123396842038);+#154=AXIS2_PLACEMENT_3D('',#155,#13,#14);+#155=CARTESIAN_POINT('',(0.,0.,0.2));+#156=FACE_BOUND('',#157,.F.);+#157=EDGE_LOOP('',(#158));+#158=ORIENTED_EDGE('',*,*,#159,.F.);+#159=EDGE_CURVE('',#160,#160,#162,.T.);+#160=VERTEX_POINT('',#161);+#161=CARTESIAN_POINT('',(0.523396842038,-3.022350952539E-17,0.2));+#162=CIRCLE('',#163,0.123396842038);+#163=AXIS2_PLACEMENT_3D('',#164,#13,#14);+#164=CARTESIAN_POINT('',(0.4,0.,0.2));+#165=FACE_BOUND('',#166,.F.);+#166=EDGE_LOOP('',(#167));+#167=ORIENTED_EDGE('',*,*,#168,.F.);+#168=EDGE_CURVE('',#169,#169,#171,.T.);+#169=VERTEX_POINT('',#170);+#170=CARTESIAN_POINT('',(-0.276603157962,0.4,0.2));+#171=CIRCLE('',#172,0.123396842038);+#172=AXIS2_PLACEMENT_3D('',#173,#13,#14);+#173=CARTESIAN_POINT('',(-0.4,0.4,0.2));+#174=FACE_BOUND('',#175,.F.);+#175=EDGE_LOOP('',(#176));+#176=ORIENTED_EDGE('',*,*,#177,.F.);+#177=EDGE_CURVE('',#178,#178,#180,.T.);+#178=VERTEX_POINT('',#179);+#179=CARTESIAN_POINT('',(0.123396842038,0.4,0.2));+#180=CIRCLE('',#181,0.123396842038);+#181=AXIS2_PLACEMENT_3D('',#182,#13,#14);+#182=CARTESIAN_POINT('',(0.,0.4,0.2));+#183=FACE_BOUND('',#184,.F.);+#184=EDGE_LOOP('',(#185));+#185=ORIENTED_EDGE('',*,*,#186,.F.);+#186=EDGE_CURVE('',#187,#187,#189,.T.);+#187=VERTEX_POINT('',#188);+#188=CARTESIAN_POINT('',(0.523396842038,0.4,0.2));+#189=CIRCLE('',#190,0.123396842038);+#190=AXIS2_PLACEMENT_3D('',#191,#13,#14);+#191=CARTESIAN_POINT('',(0.4,0.4,0.2));+#192=PLANE('',#193);+#193=AXIS2_PLACEMENT_3D('',#23,#13,#45);+#194=ADVANCED_FACE('',(#195),#199,.T.);+#195=FACE_BOUND('',#196,.T.);+#196=EDGE_LOOP('',(#61,#108,#197,#198));+#197=ORIENTED_EDGE('',*,*,#99,.T.);+#198=ORIENTED_EDGE('',*,*,#70,.F.);+#199=PLANE('',#200);+#200=AXIS2_PLACEMENT_3D('',#52,#45,#13);+#201=ADVANCED_FACE('',(#202),#216,.T.);+#202=FACE_BOUND('',#203,.F.);+#203=EDGE_LOOP('',(#204,#210,#215,#79));+#204=ORIENTED_EDGE('',*,*,#205,.F.);+#205=EDGE_CURVE('',#206,#81,#208,.T.);+#206=VERTEX_POINT('',#207);+#207=CARTESIAN_POINT('',(-0.422,0.488,0.602));+#208=LINE('',#207,#209);+#209=VECTOR('',#86,1.);+#210=ORIENTED_EDGE('',*,*,#211,.T.);+#211=EDGE_CURVE('',#206,#206,#212,.T.);+#212=CIRCLE('',#213,6.1E-02);+#213=AXIS2_PLACEMENT_3D('',#214,#13,#14);+#214=CARTESIAN_POINT('',(-0.483,0.488,0.602));+#215=ORIENTED_EDGE('',*,*,#205,.T.);+#216=CYLINDRICAL_SURFACE('',#217,6.1E-02);+#217=AXIS2_PLACEMENT_3D('',#214,#218,#45);+#218=DIRECTION('',(-0.,-0.,-1.));+#219=ADVANCED_FACE('',(#220),#232,.T.);+#220=FACE_BOUND('',#221,.T.);+#221=EDGE_LOOP('',(#113,#222,#231));+#222=ORIENTED_EDGE('',*,*,#223,.F.);+#223=EDGE_CURVE('',#224,#115,#226,.T.);+#224=VERTEX_POINT('',#225);+#225=CARTESIAN_POINT('',(-0.4,-0.4,-6.675E-03));+#226=CIRCLE('',#227,0.140175);+#227=AXIS2_PLACEMENT_3D('',#228,#229,#230);+#228=CARTESIAN_POINT('',(-0.4,-0.4,0.1335));+#229=DIRECTION('',(-2.449293598295E-16,-1.,0.));+#230=DIRECTION('',(1.,-2.449293598295E-16,0.));+#231=ORIENTED_EDGE('',*,*,#223,.T.);+#232=SPHERICAL_SURFACE('',#233,0.140175);+#233=AXIS2_PLACEMENT_3D('',#228,#13,#45);+#234=ADVANCED_FACE('',(#235),#245,.T.);+#235=FACE_BOUND('',#236,.T.);+#236=EDGE_LOOP('',(#122,#237,#244));+#237=ORIENTED_EDGE('',*,*,#238,.F.);+#238=EDGE_CURVE('',#239,#124,#241,.T.);+#239=VERTEX_POINT('',#240);+#240=CARTESIAN_POINT('',(-0.4,-2.102288275346E-33,-6.675E-03));+#241=CIRCLE('',#242,0.140175);+#242=AXIS2_PLACEMENT_3D('',#243,#229,#230);+#243=CARTESIAN_POINT('',(-0.4,0.,0.1335));+#244=ORIENTED_EDGE('',*,*,#238,.T.);+#245=SPHERICAL_SURFACE('',#246,0.140175);+#246=AXIS2_PLACEMENT_3D('',#243,#13,#45);+#247=ADVANCED_FACE('',(#248),#258,.T.);+#248=FACE_BOUND('',#249,.T.);+#249=EDGE_LOOP('',(#131,#250,#257));+#250=ORIENTED_EDGE('',*,*,#251,.F.);+#251=EDGE_CURVE('',#252,#133,#254,.T.);+#252=VERTEX_POINT('',#253);+#253=CARTESIAN_POINT('',(8.583243253524E-18,-0.4,-6.675E-03));+#254=CIRCLE('',#255,0.140175);+#255=AXIS2_PLACEMENT_3D('',#256,#229,#230);+#256=CARTESIAN_POINT('',(0.,-0.4,0.1335));+#257=ORIENTED_EDGE('',*,*,#251,.T.);+#258=SPHERICAL_SURFACE('',#259,0.140175);+#259=AXIS2_PLACEMENT_3D('',#256,#13,#45);+#260=ADVANCED_FACE('',(#261),#271,.T.);+#261=FACE_BOUND('',#262,.T.);+#262=EDGE_LOOP('',(#140,#263,#270));+#263=ORIENTED_EDGE('',*,*,#264,.F.);+#264=EDGE_CURVE('',#265,#142,#267,.T.);+#265=VERTEX_POINT('',#266);+#266=CARTESIAN_POINT('',(0.4,-0.4,-6.675E-03));+#267=CIRCLE('',#268,0.140175);+#268=AXIS2_PLACEMENT_3D('',#269,#229,#230);+#269=CARTESIAN_POINT('',(0.4,-0.4,0.1335));+#270=ORIENTED_EDGE('',*,*,#264,.T.);+#271=SPHERICAL_SURFACE('',#272,0.140175);+#272=AXIS2_PLACEMENT_3D('',#269,#13,#45);+#273=ADVANCED_FACE('',(#274),#284,.T.);+#274=FACE_BOUND('',#275,.T.);+#275=EDGE_LOOP('',(#149,#276,#283));+#276=ORIENTED_EDGE('',*,*,#277,.F.);+#277=EDGE_CURVE('',#278,#151,#280,.T.);+#278=VERTEX_POINT('',#279);+#279=CARTESIAN_POINT('',(8.583243253524E-18,-2.102288275346E-33,-6.675E-03));+#280=CIRCLE('',#281,0.140175);+#281=AXIS2_PLACEMENT_3D('',#282,#229,#230);+#282=CARTESIAN_POINT('',(0.,0.,0.1335));+#283=ORIENTED_EDGE('',*,*,#277,.T.);+#284=SPHERICAL_SURFACE('',#285,0.140175);+#285=AXIS2_PLACEMENT_3D('',#282,#13,#45);+#286=ADVANCED_FACE('',(#287),#297,.T.);+#287=FACE_BOUND('',#288,.T.);+#288=EDGE_LOOP('',(#158,#289,#296));+#289=ORIENTED_EDGE('',*,*,#290,.F.);+#290=EDGE_CURVE('',#291,#160,#293,.T.);+#291=VERTEX_POINT('',#292);+#292=CARTESIAN_POINT('',(0.4,-2.102288275346E-33,-6.675E-03));+#293=CIRCLE('',#294,0.140175);+#294=AXIS2_PLACEMENT_3D('',#295,#229,#230);+#295=CARTESIAN_POINT('',(0.4,0.,0.1335));+#296=ORIENTED_EDGE('',*,*,#290,.T.);+#297=SPHERICAL_SURFACE('',#298,0.140175);+#298=AXIS2_PLACEMENT_3D('',#295,#13,#45);+#299=ADVANCED_FACE('',(#300),#310,.T.);+#300=FACE_BOUND('',#301,.T.);+#301=EDGE_LOOP('',(#167,#302,#309));+#302=ORIENTED_EDGE('',*,*,#303,.F.);+#303=EDGE_CURVE('',#304,#169,#306,.T.);+#304=VERTEX_POINT('',#305);+#305=CARTESIAN_POINT('',(-0.4,0.4,-6.675E-03));+#306=CIRCLE('',#307,0.140175);+#307=AXIS2_PLACEMENT_3D('',#308,#229,#230);+#308=CARTESIAN_POINT('',(-0.4,0.4,0.1335));+#309=ORIENTED_EDGE('',*,*,#303,.T.);+#310=SPHERICAL_SURFACE('',#311,0.140175);+#311=AXIS2_PLACEMENT_3D('',#308,#13,#45);+#312=ADVANCED_FACE('',(#313),#323,.T.);+#313=FACE_BOUND('',#314,.T.);+#314=EDGE_LOOP('',(#176,#315,#322));+#315=ORIENTED_EDGE('',*,*,#316,.F.);+#316=EDGE_CURVE('',#317,#178,#319,.T.);+#317=VERTEX_POINT('',#318);+#318=CARTESIAN_POINT('',(8.583243253524E-18,0.4,-6.675E-03));+#319=CIRCLE('',#320,0.140175);+#320=AXIS2_PLACEMENT_3D('',#321,#229,#230);+#321=CARTESIAN_POINT('',(0.,0.4,0.1335));+#322=ORIENTED_EDGE('',*,*,#316,.T.);+#323=SPHERICAL_SURFACE('',#324,0.140175);+#324=AXIS2_PLACEMENT_3D('',#321,#13,#45);+#325=ADVANCED_FACE('',(#326),#336,.T.);+#326=FACE_BOUND('',#327,.T.);+#327=EDGE_LOOP('',(#185,#328,#335));+#328=ORIENTED_EDGE('',*,*,#329,.F.);+#329=EDGE_CURVE('',#330,#187,#332,.T.);+#330=VERTEX_POINT('',#331);+#331=CARTESIAN_POINT('',(0.4,0.4,-6.675E-03));+#332=CIRCLE('',#333,0.140175);+#333=AXIS2_PLACEMENT_3D('',#334,#229,#230);+#334=CARTESIAN_POINT('',(0.4,0.4,0.1335));+#335=ORIENTED_EDGE('',*,*,#329,.T.);+#336=SPHERICAL_SURFACE('',#337,0.140175);+#337=AXIS2_PLACEMENT_3D('',#334,#13,#45);+#338=ADVANCED_FACE('',(#339),#342,.T.);+#339=FACE_BOUND('',#340,.F.);+#340=EDGE_LOOP('',(#341));+#341=ORIENTED_EDGE('',*,*,#211,.F.);+#342=PLANE('',#213);+#343=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#347)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#344,#345,#346)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#344=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#345=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#346=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#347=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#344,'distance_accuracy_value','confusion accuracy');+#348=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#349=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#350,#360,#361,#362,#363,#364,#373,#374,#375,#376,#377,#378,#379,#380,#381,#382,#391,#392,#393,#394,#395,#396,#397,#398,#399,#400),#343);+#350=STYLED_ITEM('color',(#351),#17);+#351=PRESENTATION_STYLE_ASSIGNMENT((#352,#358));+#352=SURFACE_STYLE_USAGE(.BOTH.,#353);+#353=SURFACE_SIDE_STYLE('',(#354));+#354=SURFACE_STYLE_FILL_AREA(#355);+#355=FILL_AREA_STYLE('',(#356));+#356=FILL_AREA_STYLE_COLOUR('',#357);+#357=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#358=CURVE_STYLE('',#359,POSITIVE_LENGTH_MEASURE(0.1),#357);+#359=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#360=STYLED_ITEM('color',(#351),#46);+#361=STYLED_ITEM('color',(#351),#66);+#362=STYLED_ITEM('color',(#351),#89);+#363=STYLED_ITEM('color',(#351),#103);+#364=OVER_RIDING_STYLED_ITEM('overriding color',(#365),#114,#363);+#365=PRESENTATION_STYLE_ASSIGNMENT((#366,#372));+#366=SURFACE_STYLE_USAGE(.BOTH.,#367);+#367=SURFACE_SIDE_STYLE('',(#368));+#368=SURFACE_STYLE_FILL_AREA(#369);+#369=FILL_AREA_STYLE('',(#370));+#370=FILL_AREA_STYLE_COLOUR('',#371);+#371=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#372=CURVE_STYLE('',#359,POSITIVE_LENGTH_MEASURE(0.1),#371);+#373=OVER_RIDING_STYLED_ITEM('overriding color',(#365),#123,#363);+#374=OVER_RIDING_STYLED_ITEM('overriding color',(#365),#132,#363);+#375=OVER_RIDING_STYLED_ITEM('overriding color',(#365),#141,#363);+#376=OVER_RIDING_STYLED_ITEM('overriding color',(#365),#150,#363);+#377=OVER_RIDING_STYLED_ITEM('overriding color',(#365),#159,#363);+#378=OVER_RIDING_STYLED_ITEM('overriding color',(#365),#168,#363);+#379=OVER_RIDING_STYLED_ITEM('overriding color',(#365),#177,#363);+#380=OVER_RIDING_STYLED_ITEM('overriding color',(#365),#186,#363);+#381=STYLED_ITEM('color',(#351),#194);+#382=STYLED_ITEM('color',(#383),#201);+#383=PRESENTATION_STYLE_ASSIGNMENT((#384,#390));+#384=SURFACE_STYLE_USAGE(.BOTH.,#385);+#385=SURFACE_SIDE_STYLE('',(#386));+#386=SURFACE_STYLE_FILL_AREA(#387);+#387=FILL_AREA_STYLE('',(#388));+#388=FILL_AREA_STYLE_COLOUR('',#389);+#389=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#390=CURVE_STYLE('',#359,POSITIVE_LENGTH_MEASURE(0.1),#389);+#391=STYLED_ITEM('color',(#365),#219);+#392=STYLED_ITEM('color',(#365),#234);+#393=STYLED_ITEM('color',(#365),#247);+#394=STYLED_ITEM('color',(#365),#260);+#395=STYLED_ITEM('color',(#365),#273);+#396=STYLED_ITEM('color',(#365),#286);+#397=STYLED_ITEM('color',(#365),#299);+#398=STYLED_ITEM('color',(#365),#312);+#399=STYLED_ITEM('color',(#365),#325);+#400=STYLED_ITEM('color',(#383),#338);+ENDSEC;+END-ISO-10303-21;
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>va2101csg9</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>va2101csg9</title>