component
UTC2000T-I
Public Made by Adomby adom
Microchip Tech Power Management - Specialized, QFN-16-EP(3x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+180−8@@ -1,13 +1,190 @@ {+ "schema_version": 1,+ "type": "component", "slug": "utc2000t-i",+ "title": "UTC2000T-I",+ "brief": "Microchip Tech Power Management - Specialized, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Microchip Tech Power Management - Specialized, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "power management (pmic)", "utc2000t-i" ],+ "component": {+ "mpn": "UTC2000T-I",+ "manufacturer": "Microchip Tech",+ "package": "QFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Power Management (PMIC)",+ "subcategory": "Power Management - Specialized",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589799052905635840",+ "parts": {+ "symbol": "utc2000t-i.kicad_sym",+ "footprint": "utc2000t-i.kicad_mod",+ "model_3d": "utc2000t-i.glb",+ "model_3d_step": "utc2000t-i.step",+ "lbr": "utc2000t-i.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "OCS#",+ "type": "input",+ "description": "Active-low fault input (Schmitt-triggered, internal ~100 \u00b5A pull-up). Asserted by the +5V VBUS power-supply device to notify the UTC2000 of a system fault (typically overcurrent/overvoltage). All digital control outputs revert to their default deasserted state while OCS# is asserted, and FAULT_IND latches high until reset/power cycle."+ },+ {+ "number": "2",+ "name": "CFG_SEL",+ "type": "input",+ "description": "Analog configuration-select input sampled at power-on (at Vcfg_samp) to place the device in DFP or UFP mode and select the DFP charging profile (Legacy 500 mA / 900 mA, 1.5 A, or 3.0 A). Voltage thresholds are defined in Table 3-1 (DFP) and Table 3-2 (UFP)."+ },+ {+ "number": "3",+ "name": "ENABLE",+ "type": "input",+ "description": "Active-high controller enable (Schmitt-triggered digital input). When low, the UTC2000 remains in the Disabled Idle state with default deasserted outputs. If unused, tie to VDD through a 10 k\u03a9 pull-up resistor."+ },+ {+ "number": "4",+ "name": "FAULT_IND",+ "type": "output",+ "description": "Active-high fault indicator output (O25, 25 mA sink/source push-pull). Asserted after an OCS# overcurrent event or a VMON overvoltage event; cleared by toggling ENABLE (OCS# case) or by a power cycle (VMON case)."+ },+ {+ "number": "5",+ "name": "AUDIO_ADAPTER/CONNECTED#",+ "type": "output",+ "description": "Muxed function output. In DFP modes: active-high AUDIO_ADAPTER output (O25) indicating detection of a USB audio adapter (used to toggle a high-speed USB/audio switch). In UFP mode: open-drain active-low CONNECTED# output (OD25) that asserts when a valid USB Type-C connection is detected on the CC pin and VBUS is within range."+ },+ {+ "number": "6",+ "name": "CC2",+ "type": "input",+ "description": "USB Type-C CC2 monitor pin (ADC input). Samples the CC2 line voltage to detect connect/disconnect, Rd/Ra pull-downs, plug orientation, and charging capability. Detection thresholds are defined in Table 3-1 (DFP) and Table 3-2 (UFP)."+ },+ {+ "number": "7",+ "name": "CC1",+ "type": "input",+ "description": "USB Type-C CC1 monitor pin (ADC input). Samples the CC1 line voltage to detect connect/disconnect, Rd/Ra pull-downs, plug orientation, and charging capability. Detection thresholds are defined in Table 3-1 (DFP) and Table 3-2 (UFP)."+ },+ {+ "number": "8",+ "name": "VCONN2_OUT#/LEGACY_IND#",+ "type": "output",+ "description": "Muxed open-drain output (OD25, 25 mA). In DFP modes: active-low VCONN2_OUT# controls the external switch supplying 5 V VCONN to CC2 for active-cable circuitry. In UFP mode: active-low LEGACY_IND# asserts when a valid USB Type-C connection is detected with legacy 500 mA / 900 mA charging capability."+ },+ {+ "number": "9",+ "name": "VCONN1_OUT#/1.5A_IND#",+ "type": "output",+ "description": "Muxed open-drain output (OD25, 25 mA). In DFP modes: active-low VCONN1_OUT# controls the external switch supplying 5 V VCONN to CC1 for active-cable circuitry. In UFP mode: active-low 1.5A_IND# asserts when a valid USB Type-C connection is detected with 1.5 A charging capability."+ },+ {+ "number": "10",+ "name": "PPC_EN/3.0A_IND#",+ "type": "output",+ "description": "Muxed output. In DFP modes: active-high PPC_EN (O25) enables the external 5 V VBUS port-power controller when a valid USB Type-C connection is detected. In UFP mode: active-low 3.0A_IND# (OD25) asserts when a valid USB Type-C connection is detected with 3.0 A charging capability."+ },+ {+ "number": "11",+ "name": "PLUG_ORIENTATION#",+ "type": "output",+ "description": "Open-drain active-low plug-orientation indicator output (OD25, 25 mA). Remains high (unasserted) in the default unconnected state or when an Rd pull-down is detected on CC1. Asserts low when an Rd pull-down is detected on CC2, indicating a flipped plug - used to drive the external USB mux/switch."+ },+ {+ "number": "12",+ "name": "VMON",+ "type": "input",+ "description": "VBUS voltage-monitor ADC input. Monitors the USB receptacle VBUS (via an external resistor divider). If VMON exceeds 0.8 V (corresponding to >6.4 V on VBUS), the device enters the fault state and deasserts all outputs. Required in UFP modes; in DFP modes, if unused, tie to GND through a 10 k\u03a9 pull-down resistor."+ },+ {+ "number": "13",+ "name": "VSS",+ "type": "power_in",+ "description": "Device ground. The exposed pad on the underside of the QFN package must also be connected to VSS/ground."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave unconnected (or tie per Microchip recommendation)."+ },+ {+ "number": "15",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave unconnected (or tie per Microchip recommendation)."+ },+ {+ "number": "16",+ "name": "VDD",+ "type": "power_in",+ "description": "5.0 V power input (operating range 4.5 V to 5.5 V). A minimum of one 0.1 \u00b5F bypass capacitor placed close to the pin is recommended. The high level of all digital outputs is referenced to VDD."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "power_in",+ "description": "Exposed thermal/ground pad on the underside of the QFN-16 package. Must be connected to VSS/ground for proper operation and thermal performance."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589799052905635840",+ "pages": 42,+ "sha256": "42a771aa3c2bd227",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Microchip Tech",+ "Package": "QFN-16-EP(3x3)",+ "Category": "Power Management (PMIC)",+ "Pins": "17"+ }+ },+ "variants": [+ {+ "mpn": "UTC2000T-II/MG",+ "kind": "packaging"+ },+ {+ "mpn": "UTC2000T-I/MG",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "utc2000t-i"+ ],+ "discovery_pitch": "UTC2000T-I (Microchip Tech) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +202,5 @@ "docs/utc2000t-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }