component
USB2514BT-I
Public Made by Adomby adom
Microchip Tech USB Converters, QFN-36-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -114,7 +114,7 @@ "number": "14", "name": "CRFILT", "type": "passive",- "description": "Core regulator filter capacitor connection; optionally connect 0.1\u00b5F low-ESR capacitor to VSS or leave unconnected."+ "description": "Core regulator filter capacitor connection; optionally connect 0.1µF low-ESR capacitor to VSS or leave unconnected." }, { "number": "15",@@ -186,13 +186,13 @@ "number": "26", "name": "RESET_N", "type": "input",- "description": "Active-low reset input with Schmitt trigger; system can reset the device by driving low; minimum active-low pulse is 1\u00b5s after all supplies within operating range."+ "description": "Active-low reset input with Schmitt trigger; system can reset the device by driving low; minimum active-low pulse is 1µs after all supplies within operating range." }, { "number": "27", "name": "VBUS_DET", "type": "input",- "description": "Upstream VBUS power detection input; detects upstream bus power state to control internal D+ pull-up assertion; use 2:1 voltage divider (two 100k\u03a9 resistors) for detachable hubs."+ "description": "Upstream VBUS power detection input; detects upstream bus power state to control internal D+ pull-up assertion; use 2:1 voltage divider (two 100kΩ resistors) for detachable hubs." }, { "number": "28",@@ -228,19 +228,19 @@ "number": "33", "name": "XTALIN", "type": "input",- "description": "Crystal oscillator input for 24MHz parallel-resonant fundamental-mode crystal (\u00b1350ppm); dual-function as external clock input (CLKIN) for alternative 24MHz clock source."+ "description": "Crystal oscillator input for 24MHz parallel-resonant fundamental-mode crystal (±350ppm); dual-function as external clock input (CLKIN) for alternative 24MHz clock source." }, { "number": "34", "name": "PLLFILT", "type": "passive",- "description": "PLL regulator filter capacitor connection; optionally connect 0.1\u00b5F low-ESR capacitor to VSS or leave unconnected."+ "description": "PLL regulator filter capacitor connection; optionally connect 0.1µF low-ESR capacitor to VSS or leave unconnected." }, { "number": "35", "name": "RBIAS", "type": "passive",- "description": "USB transceiver bias resistor connection; attach 12.0k\u03a9 (\u00b11%) resistor from this pin to ground to set transceiver internal bias settings."+ "description": "USB transceiver bias resistor connection; attach 12.0kΩ (±1%) resistor from this pin to ground to set transceiver internal bias settings." }, { "number": "36",@@ -335,5 +335,8 @@ "docs/usb2514bt-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }