component
USB2514BT-I
Public Made by Adomby adom
Microchip Tech USB Converters, QFN-36-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
usb2514bt-i: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+90−10
package.json+48−8@@ -129,7 +129,7 @@ "number": "14", "name": "CRFILT", "type": "passive",- "description": "Core regulator filter capacitor connection; optionally connect 0.1\u00b5F low-ESR capacitor to VSS or leave unconnected."+ "description": "Core regulator filter capacitor connection; optionally connect 0.1µF low-ESR capacitor to VSS or leave unconnected." }, { "number": "15",@@ -201,13 +201,13 @@ "number": "26", "name": "RESET_N", "type": "input",- "description": "Active-low reset input with Schmitt trigger; system can reset the device by driving low; minimum active-low pulse is 1\u00b5s after all supplies within operating range."+ "description": "Active-low reset input with Schmitt trigger; system can reset the device by driving low; minimum active-low pulse is 1µs after all supplies within operating range." }, { "number": "27", "name": "VBUS_DET", "type": "input",- "description": "Upstream VBUS power detection input; detects upstream bus power state to control internal D+ pull-up assertion; use 2:1 voltage divider (two 100k\u03a9 resistors) for detachable hubs."+ "description": "Upstream VBUS power detection input; detects upstream bus power state to control internal D+ pull-up assertion; use 2:1 voltage divider (two 100kΩ resistors) for detachable hubs." }, { "number": "28",@@ -243,19 +243,19 @@ "number": "33", "name": "XTALIN", "type": "input",- "description": "Crystal oscillator input for 24MHz parallel-resonant fundamental-mode crystal (\u00b1350ppm); dual-function as external clock input (CLKIN) for alternative 24MHz clock source."+ "description": "Crystal oscillator input for 24MHz parallel-resonant fundamental-mode crystal (±350ppm); dual-function as external clock input (CLKIN) for alternative 24MHz clock source." }, { "number": "34", "name": "PLLFILT", "type": "passive",- "description": "PLL regulator filter capacitor connection; optionally connect 0.1\u00b5F low-ESR capacitor to VSS or leave unconnected."+ "description": "PLL regulator filter capacitor connection; optionally connect 0.1µF low-ESR capacitor to VSS or leave unconnected." }, { "number": "35", "name": "RBIAS", "type": "passive",- "description": "USB transceiver bias resistor connection; attach 12.0k\u03a9 (\u00b11%) resistor from this pin to ground to set transceiver internal bias settings."+ "description": "USB transceiver bias resistor connection; attach 12.0kΩ (±1%) resistor from this pin to ground to set transceiver internal bias settings." }, { "number": "36",@@ -307,6 +307,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "usb2514bt-i.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 6.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6212c4fd2463ccb7c6ae2c35f5e24c80884153fcaeaf8e86549c0e49087bc8bb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "usb2514bt-i-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 6.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "92881f0bd2f33770350d6a31237b4a075da4fc529b56012c7259c22105d11c04",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -294,7 +294,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "usb2514bt-i.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 6.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6212c4fd2463ccb7c6ae2c35f5e24c80884153fcaeaf8e86549c0e49087bc8bb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "usb2514bt-i-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 6.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "92881f0bd2f33770350d6a31237b4a075da4fc529b56012c7259c22105d11c04",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -342,4 +382,4 @@ "public": true }, "updated_at": "2026-09-25T13:49:50.012Z"-}+}