← Commit history

Set visibility: public

Ray ·cb061cd454 · ·parent 055321c
1 file changed +10−7
page.json+10−7
@@ -38,7 +38,7 @@         "number": "1",         "name": "GND",         "type": "power_in",-        "description": "Ground connection; all voltages are measured with respect to ground; bypass VCC and VREF to GND with 0.1\u00b5F or larger ceramic capacitor."+        "description": "Ground connection; all voltages are measured with respect to ground; bypass VCC and VREF to GND with 0.1µF or larger ceramic capacitor."       },       {         "number": "2",@@ -62,13 +62,13 @@         "number": "5",         "name": "MOUT",         "type": "bidirectional",-        "description": "Output of analog multiplier and inverting input of current amplifier; high-impedance input for differential amplifier configuration; multiplier output current limited to 2\u00d7IAC."+        "description": "Output of analog multiplier and inverting input of current amplifier; high-impedance input for differential amplifier configuration; multiplier output current limited to 2×IAC."       },       {         "number": "6",         "name": "IAC",         "type": "input",-        "description": "Analog multiplier input representing instantaneous rectified line voltage; current proportional to input voltage; recommended maximum current is 500\u00b5A."+        "description": "Analog multiplier input representing instantaneous rectified line voltage; current proportional to input voltage; recommended maximum current is 500µA."       },       {         "number": "7",@@ -104,7 +104,7 @@         "number": "12",         "name": "RT",         "type": "input",-        "description": "Oscillator charging current input; resistor from RT to GND programs oscillator charging current and frequency; TI recommends 10k\u03a9 to 100k\u03a9; nominal voltage 3V."+        "description": "Oscillator charging current input; resistor from RT to GND programs oscillator charging current and frequency; TI recommends 10kΩ to 100kΩ; nominal voltage 3V."       },       {         "number": "13",@@ -122,13 +122,13 @@         "number": "15",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply voltage input; connect to stable source of at least 20mA from 10V to 17V for normal operation; bypass to GND with 0.1\u00b5F or larger ceramic capacitor."+        "description": "Positive supply voltage input; connect to stable source of at least 20mA from 10V to 17V for normal operation; bypass to GND with 0.1µF or larger ceramic capacitor."       },       {         "number": "16",         "name": "DRVOUT",         "type": "output",-        "description": "Gate drive output for boost switch; totem-pole MOSFET gate driver with \u00b11.2A peak current capability; series gate current-limiting resistor recommended to prevent overshoot on capacitive loads."+        "description": "Gate drive output for boost switch; totem-pole MOSFET gate driver with ±1.2A peak current capability; series gate current-limiting resistor recommended to prevent overshoot on capacitive loads."       }     ],     "provenance": {@@ -208,5 +208,8 @@     "docs/ucc3818adr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file