component
UCC28C40QDRQ1
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# UCC28C40QDRQ1++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-8++UCC28C40QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Error amplifier output for compensation with internal current limiting; can be forced to GND to command zero duty cycle. |+| 2 | FB | input | Inverting input to error amplifier with noninverting input internally trimmed to 2.5V ±1% for voltage-feedback loop control. |+| 3 | CS | input | Primary-side current sense pin; noninverting input to PWM comparator connected to MOSFET source resistor to terminate OUT switch conduction. |+| 4 | RT/CT | bidirectional | Oscillator timing pin with external timing resistor from VREF and capacitor to GND to set switching frequency up to 1MHz. |+| 5 | GND | power_in | Ground return pin for output driver stage and logic level controller section. |+| 6 | OUT | output | On-chip drive stage output for direct MOSFET driving with ±1A peak current, rail-to-rail voltage swing, and actively held low when VDD below turnon threshold. |+| 7 | VDD | power_in | Analog controller bias power input with maximum supply voltage 20V; total current is sum of quiescent current and average OUT current. |+| 8 | VREF | power_in | 5V reference voltage output with ±1% tolerance for error amplifier and internal circuits; requires minimum 0.1µF ceramic bypass capacitor to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC28C40QDRQ1`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `ucc28c40qdrq1-etched.step` / `ucc28c40qdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc28c40qdrq1.step` / `ucc28c40qdrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc28c44-q1) (49 pp, sha256 `0ab76ce5a6cf1522`, retrieved 2026-10-07, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc28c40qdrq1-datasheet.pdf)
page.jsonadded+197@@ -0,0 +1,197 @@+{+ "slug": "ucc28c40qdrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "ucc28c40qdrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ucc28c40qdrq1.kicad_sym",+ "ucc28c40qdrq1.kicad_mod",+ "ucc28c40qdrq1.glb",+ "ucc28c40qdrq1.step",+ "ucc28c40qdrq1.lbr",+ "docs/hero.png",+ "docs/ucc28c40qdrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ucc28c40qdrq1-hero.glb",+ "ucc28c40qdrq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "UCC28C40QDRQ1",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "AC-DC Controllers And Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ucc28c44-q1",+ "parts": {+ "symbol": "ucc28c40qdrq1.kicad_sym",+ "footprint": "ucc28c40qdrq1.kicad_mod",+ "model_3d": "ucc28c40qdrq1-hero.glb",+ "model_3d_plain": "ucc28c40qdrq1.glb",+ "model_3d_step": "ucc28c40qdrq1-etched.step",+ "model_3d_step_plain": "ucc28c40qdrq1.step",+ "lbr": "ucc28c40qdrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2864613",+ "digikey": "296-UCC28C40QDRQ1TR-ND",+ "mouser": "595-UCC28C40QDRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T07:59:54Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-UCC28C40QDRQ1TR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-UCC28C40QDRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output for compensation with internal current limiting; can be forced to GND to command zero duty cycle."+ },+ {+ "number": "2",+ "name": "FB",+ "type": "input",+ "description": "Inverting input to error amplifier with noninverting input internally trimmed to 2.5V ±1% for voltage-feedback loop control."+ },+ {+ "number": "3",+ "name": "CS",+ "type": "input",+ "description": "Primary-side current sense pin; noninverting input to PWM comparator connected to MOSFET source resistor to terminate OUT switch conduction."+ },+ {+ "number": "4",+ "name": "RT/CT",+ "type": "bidirectional",+ "description": "Oscillator timing pin with external timing resistor from VREF and capacitor to GND to set switching frequency up to 1MHz."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return pin for output driver stage and logic level controller section."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "On-chip drive stage output for direct MOSFET driving with ±1A peak current, rail-to-rail voltage swing, and actively held low when VDD below turnon threshold."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Analog controller bias power input with maximum supply voltage 20V; total current is sum of quiescent current and average OUT current."+ },+ {+ "number": "8",+ "name": "VREF",+ "type": "power_in",+ "description": "5V reference voltage output with ±1% tolerance for error amplifier and internal circuits; requires minimum 0.1µF ceramic bypass capacitor to GND."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 11,+ "cost_usd": 0.1169,+ "at": "2026-10-07T07:59:39"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ucc28c44-q1",+ "pages": 49,+ "sha256": "0ab76ce5a6cf1522",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ucc28c40qdrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ucc28c40qdrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "ec6d052880a1cc5b29b820cd2c523f6cf00a9bb7f74008cd08b4be22da2defd7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}