← Commit history

ucc2895qdwrq1: specified limits as data (metadata.characteristics, 60 rows from the datasheet)

Ray ·175443af16 ·25d ago ·parent ce748cd
2 files changed +795−1
README.md+67
@@ -38,6 +38,73 @@ UCC2895QDWRQ1 from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descri | Category | Power Management (PMIC) | | Pins | 20 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Input voltage range (EAP, EAN, EAOUT, RAMP, SYNC, ADS, CS, SS/DISB), lower limit |  | -0.3 |  |  | V | Upper limit printed as REF + 0.3 V | 2 |+| Drive output voltage range (OUTA, OUTB, OUTC, OUTD), lower limit |  | -0.3 |  |  | V | Upper limit printed as VDD + 0.3 V | 2 |+| Supply voltage | VDD |  |  | 17 | V | IDD < 10 mA | 2 |+| Supply current | IDD |  |  | 30 | mA |  | 2 |+| Reference current | IREF |  |  | 15 | mA |  | 2 |+| Output current | IO |  |  | 100 | mA |  | 2 |+| Power dissipation | PD |  |  | 650 | mW | TA = 25°C | 2 |+| Storage temperature range | Tstg | -65 |  | 150 | °C |  | 2 |+| Junction temperature range | TJ | -55 |  | 150 | °C |  | 2 |+| Electrostatic discharge protection, human-body model (HBM) |  |  |  | 800 | V | Human-body model (HBM) | 2 |+| Supply voltage | VDD | 10 |  | 16.5 | V |  | 2 |+| Reference bypass capacitor | CREF | 0.1 |  | 4.7 | μF |  | 2 |+| Delay resistor | RDEL_AB, RDEL_CD | 2.5 |  | 40 | kΩ |  | 3 |+| Operating junction temperature | TJ | -55 |  | 125 | °C |  | 3 |+| Start-up voltage threshold | UVLO(on) | 10.2 | 11 | 11.8 | V |  | 3 |+| Minimum operating voltage after start-up | UVLO(off) | 8.2 | 9 | 9.8 | V |  | 3 |+| Hysteresis | UVLO(hys) | 1 | 2 | 3 | V |  | 3 |+| Start-up current | ISTART | 150 |  | 250 | μA | VDD = 8 V | 3 |+| Operating current | IDD | 5 |  | 6 | mA |  | 3 |+| VDD clamp voltage | VDD_CLAMP | 16.5 | 17.5 | 18.5 | V | IDD = 10 mA | 3 |+| Output voltage | VREF | 4.94 | 5 | 5.06 | V | TJ = 25°C | 3 |+| Output voltage | VREF | 4.85 | 5 | 5.15 | V | 10 V < VDD < VDD_CLAMP, 0 mA < IREF < 5 mA, TJ = –40°C to 125°C | 3 |+| Short-circuit current | ISC | 10 |  | 20 | mA | REF = 0 V, TJ = 25°C | 3 |+| Common-mode input voltage |  | -0.1 |  | 3.6 | V |  | 3 |+| Offset voltage | VIO | -7 |  | 7 | mV |  | 3 |+| High-level output voltage | VOH_EAOUT | 4 | 4.5 | 5 | V | EAP – EAN = 500 mV, IEAOUT = –0.5 mA | 3 |+| Low-level output voltage | VOL_EAOUT | 0 | 0.2 | 0.4 | V | EAP – EAN = –500 mV, IEAOUT = 0.5 mA | 3 |+| Error amplifier output source current | ISOURCE | 1 |  | 1.5 | mA | EAP – EAN = 500 mV, EAOUT = 2.5 V | 3 |+| Error amplifier output sink current | ISINK | 2.5 |  | 4.5 | mA | EAP – EAN = –500 mV, EAOUT = 2.5 V | 3 |+| Open-loop dc gain | AVOL | 75 |  | 85 | dB |  | 3 |+| Unity gain bandwidth | GBW | 5 |  | 7 | MHz |  | 3 |+| Slew rate |  | 1.5 |  | 2.2 | V/μs | 1 V < EAN < 0 V, EAP = 500 mV, 0.5 V < EAOUT < 3 V | 3 |+| No-load comparator turn-off threshold |  | 0.45 | 0.5 | 0.55 | V |  | 3 |+| No-load comparator turn-on threshold |  | 0.55 | 0.6 | 0.69 | V |  | 3 |+| No-load comparator hysteresis |  | 0.035 | 0.1 | 0.165 | V |  | 3 |+| Frequency | fOSC | 473 | 500 | 527 | kHz | TJ = 25°C | 3 |+| Frequency total variation |  |  | 2.5 | 5 | % | Over line and temperature | 3 |+| High-level input voltage, SYNC | VOH_SYNC | 4.1 | 4.5 | 5 | V | ISYNC = –400 μA, VCT = 2.6 V | 3 |+| SYNC output pulse width |  | 85 |  | 135 | ns | LOADSYNC = 3.9 kΩ and 30 pF in parallel | 3 |+| Timing resistor voltage | VRT | 2.9 | 3 | 3.1 | V |  | 3 |+| Timing capacitor peak voltage | VCT(peak) | 2.25 | 2.35 | 2.55 | V |  | 3 |+| Timing capacitor valley voltage | VCT(valley) | 0 | 0.2 | 0.4 | V |  | 3 |+| Peak current threshold |  | 1.9 | 2 | 2.1 | V |  | 4 |+| Overcurrent threshold |  | 2.4 | 2.5 | 2.6 | V |  | 4 |+| Current sense to output delay |  | 75 |  | 110 | ns | 0 V ≤ CS ≤ 2.3 V, DELAB = DELCD = REF | 4 |+| Soft-start source current | ISOURCE | -40 | -35 | -30 | μA | SS/DISB = 3 V, CS = 1.9 V | 5 |+| Soft-start sink current | ISINK | 325 | 350 | 375 | μA | SS/DISB = 3 V, CS = 2.6 V | 5 |+| Soft-start/disable comparator threshold |  | 0.44 | 0.5 | 0.56 | V |  | 5 |+| DELAB/DELCD output voltage | V | 0.45 | 0.5 | 0.55 | V | ADS = CS = 0 V | 5 |+| DELAB/DELCD output voltage | V | 1.9 | 2 | 2.1 | V | ADS = 0 V, CS = 2 V | 5 |+| Output delay | tDELAY | 450 | 560 | 620 | ns | ADS = CS = 0 V | 5 |+| High-level output voltage (all outputs) | VOH | 250 |  | 420 | mV | IOUT = –10 mA, VDD to output | 5 |+| Low-level output voltage (all outputs) | VOL | 150 |  | 270 | mV | IOUT = 10 mA | 5 |+| Rise time | tR | 20 | 35 | 35 | ns | CLOAD = 100 pF | 5 |+| Fall time | tF | 20 | 35 | 35 | ns | CLOAD = 100 pF | 5 |+| EAOUT to RAMP input offset voltage |  | 0.7 | 0.85 | 1.05 | V | RAMP = 0 V, DELAB = DELCD = REF | 6 |+| Minimum phase shift |  | 0 | 0.85 | 1.5 | % | RAMP = 0 V, EAOUT = 650 mV (OUTA to OUTC, OUTB to OUTD) | 6 |+| Delay | tDELAY | 70 | 120 | 120 | ns | 0 V < RAMP < 2.5 V, EAOUT = 1.2 V, DELAB = DELCD = REF | 6 |+| RAMP bias current | IR(bias) | -5 |  | 5 | μA | RAMP < 5 V, CT = 2.2 V | 6 |+| RAMP sink current | IR(sink) | 11 | 19 | 19 | mA | RAMP = 5 V, CT = 2.6 V | 6 |+ ## CAD (KiCad official)  - Symbol: `UCC2895QDWRQ1`
page.json+728−1
@@ -252,6 +252,733 @@       "Package": "SOIC-20-300mil",       "Category": "Power Management (PMIC)",       "Pins": "20"+    },+    "characteristics": {+      "version": 1,+      "source": "datasheet",+      "datasheet_sha256": "5b333e1d4ff20c03",+      "rows": [+        {+          "name": "Input voltage range (EAP, EAN, EAOUT, RAMP, SYNC, ADS, CS, SS/DISB), lower limit",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.3,+          "typ": null,+          "max": null,+          "conditions": "Upper limit printed as REF + 0.3 V",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Drive output voltage range (OUTA, OUTB, OUTC, OUTD), lower limit",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.3,+          "typ": null,+          "max": null,+          "conditions": "Upper limit printed as VDD + 0.3 V",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Supply voltage",+          "symbol": "VDD",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 17,+          "conditions": "IDD < 10 mA",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Supply current",+          "symbol": "IDD",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 30,+          "conditions": "",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Reference current",+          "symbol": "IREF",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 15,+          "conditions": "",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Output current",+          "symbol": "IO",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 100,+          "conditions": "",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Power dissipation",+          "symbol": "PD",+          "kind": "absolute_maximum",+          "unit": "mW",+          "min": null,+          "typ": null,+          "max": 650,+          "conditions": "TA = 25°C",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Storage temperature range",+          "symbol": "Tstg",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": -65,+          "typ": null,+          "max": 150,+          "conditions": "",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Junction temperature range",+          "symbol": "TJ",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": -55,+          "typ": null,+          "max": 150,+          "conditions": "",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Electrostatic discharge protection, human-body model (HBM)",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 800,+          "conditions": "Human-body model (HBM)",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Supply voltage",+          "symbol": "VDD",+          "kind": "recommended_operating",+          "unit": "V",+          "min": 10,+          "typ": null,+          "max": 16.5,+          "conditions": "",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Reference bypass capacitor",+          "symbol": "CREF",+          "kind": "recommended_operating",+          "unit": "μF",+          "min": 0.1,+          "typ": null,+          "max": 4.7,+          "conditions": "",+          "source_page": 2,+          "source": "datasheet"+        },+        {+          "name": "Delay resistor",+          "symbol": "RDEL_AB, RDEL_CD",+          "kind": "recommended_operating",+          "unit": "kΩ",+          "min": 2.5,+          "typ": null,+          "max": 40,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Operating junction temperature",+          "symbol": "TJ",+          "kind": "recommended_operating",+          "unit": "°C",+          "min": -55,+          "typ": null,+          "max": 125,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Start-up voltage threshold",+          "symbol": "UVLO(on)",+          "kind": "electrical",+          "unit": "V",+          "min": 10.2,+          "typ": 11,+          "max": 11.8,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Minimum operating voltage after start-up",+          "symbol": "UVLO(off)",+          "kind": "electrical",+          "unit": "V",+          "min": 8.2,+          "typ": 9,+          "max": 9.8,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Hysteresis",+          "symbol": "UVLO(hys)",+          "kind": "electrical",+          "unit": "V",+          "min": 1,+          "typ": 2,+          "max": 3,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Start-up current",+          "symbol": "ISTART",+          "kind": "electrical",+          "unit": "μA",+          "min": 150,+          "typ": null,+          "max": 250,+          "conditions": "VDD = 8 V",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Operating current",+          "symbol": "IDD",+          "kind": "electrical",+          "unit": "mA",+          "min": 5,+          "typ": null,+          "max": 6,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "VDD clamp voltage",+          "symbol": "VDD_CLAMP",+          "kind": "electrical",+          "unit": "V",+          "min": 16.5,+          "typ": 17.5,+          "max": 18.5,+          "conditions": "IDD = 10 mA",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Output voltage",+          "symbol": "VREF",+          "kind": "electrical",+          "unit": "V",+          "min": 4.94,+          "typ": 5,+          "max": 5.06,+          "conditions": "TJ = 25°C",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Output voltage",+          "symbol": "VREF",+          "kind": "electrical",+          "unit": "V",+          "min": 4.85,+          "typ": 5,+          "max": 5.15,+          "conditions": "10 V < VDD < VDD_CLAMP, 0 mA < IREF < 5 mA, TJ = –40°C to 125°C",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Short-circuit current",+          "symbol": "ISC",+          "kind": "electrical",+          "unit": "mA",+          "min": 10,+          "typ": null,+          "max": 20,+          "conditions": "REF = 0 V, TJ = 25°C",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Common-mode input voltage",+          "symbol": "",+          "kind": "electrical",+          "unit": "V",+          "min": -0.1,+          "typ": null,+          "max": 3.6,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Offset voltage",+          "symbol": "VIO",+          "kind": "electrical",+          "unit": "mV",+          "min": -7,+          "typ": null,+          "max": 7,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "High-level output voltage",+          "symbol": "VOH_EAOUT",+          "kind": "electrical",+          "unit": "V",+          "min": 4,+          "typ": 4.5,+          "max": 5,+          "conditions": "EAP – EAN = 500 mV, IEAOUT = –0.5 mA",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Low-level output voltage",+          "symbol": "VOL_EAOUT",+          "kind": "electrical",+          "unit": "V",+          "min": 0,+          "typ": 0.2,+          "max": 0.4,+          "conditions": "EAP – EAN = –500 mV, IEAOUT = 0.5 mA",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Error amplifier output source current",+          "symbol": "ISOURCE",+          "kind": "electrical",+          "unit": "mA",+          "min": 1,+          "typ": null,+          "max": 1.5,+          "conditions": "EAP – EAN = 500 mV, EAOUT = 2.5 V",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Error amplifier output sink current",+          "symbol": "ISINK",+          "kind": "electrical",+          "unit": "mA",+          "min": 2.5,+          "typ": null,+          "max": 4.5,+          "conditions": "EAP – EAN = –500 mV, EAOUT = 2.5 V",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Open-loop dc gain",+          "symbol": "AVOL",+          "kind": "electrical",+          "unit": "dB",+          "min": 75,+          "typ": null,+          "max": 85,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Unity gain bandwidth",+          "symbol": "GBW",+          "kind": "electrical",+          "unit": "MHz",+          "min": 5,+          "typ": null,+          "max": 7,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Slew rate",+          "symbol": "",+          "kind": "electrical",+          "unit": "V/μs",+          "min": 1.5,+          "typ": null,+          "max": 2.2,+          "conditions": "1 V < EAN < 0 V, EAP = 500 mV, 0.5 V < EAOUT < 3 V",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "No-load comparator turn-off threshold",+          "symbol": "",+          "kind": "electrical",+          "unit": "V",+          "min": 0.45,+          "typ": 0.5,+          "max": 0.55,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "No-load comparator turn-on threshold",+          "symbol": "",+          "kind": "electrical",+          "unit": "V",+          "min": 0.55,+          "typ": 0.6,+          "max": 0.69,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "No-load comparator hysteresis",+          "symbol": "",+          "kind": "electrical",+          "unit": "V",+          "min": 0.035,+          "typ": 0.1,+          "max": 0.165,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Frequency",+          "symbol": "fOSC",+          "kind": "electrical",+          "unit": "kHz",+          "min": 473,+          "typ": 500,+          "max": 527,+          "conditions": "TJ = 25°C",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Frequency total variation",+          "symbol": "",+          "kind": "tolerance",+          "unit": "%",+          "min": null,+          "typ": 2.5,+          "max": 5,+          "conditions": "Over line and temperature",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "High-level input voltage, SYNC",+          "symbol": "VOH_SYNC",+          "kind": "electrical",+          "unit": "V",+          "min": 4.1,+          "typ": 4.5,+          "max": 5,+          "conditions": "ISYNC = –400 μA, VCT = 2.6 V",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "SYNC output pulse width",+          "symbol": "",+          "kind": "electrical",+          "unit": "ns",+          "min": 85,+          "typ": null,+          "max": 135,+          "conditions": "LOADSYNC = 3.9 kΩ and 30 pF in parallel",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Timing resistor voltage",+          "symbol": "VRT",+          "kind": "electrical",+          "unit": "V",+          "min": 2.9,+          "typ": 3,+          "max": 3.1,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Timing capacitor peak voltage",+          "symbol": "VCT(peak)",+          "kind": "electrical",+          "unit": "V",+          "min": 2.25,+          "typ": 2.35,+          "max": 2.55,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Timing capacitor valley voltage",+          "symbol": "VCT(valley)",+          "kind": "electrical",+          "unit": "V",+          "min": 0,+          "typ": 0.2,+          "max": 0.4,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Peak current threshold",+          "symbol": "",+          "kind": "electrical",+          "unit": "V",+          "min": 1.9,+          "typ": 2,+          "max": 2.1,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Overcurrent threshold",+          "symbol": "",+          "kind": "electrical",+          "unit": "V",+          "min": 2.4,+          "typ": 2.5,+          "max": 2.6,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Current sense to output delay",+          "symbol": "",+          "kind": "electrical",+          "unit": "ns",+          "min": 75,+          "typ": null,+          "max": 110,+          "conditions": "0 V ≤ CS ≤ 2.3 V, DELAB = DELCD = REF",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Soft-start source current",+          "symbol": "ISOURCE",+          "kind": "electrical",+          "unit": "μA",+          "min": -40,+          "typ": -35,+          "max": -30,+          "conditions": "SS/DISB = 3 V, CS = 1.9 V",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Soft-start sink current",+          "symbol": "ISINK",+          "kind": "electrical",+          "unit": "μA",+          "min": 325,+          "typ": 350,+          "max": 375,+          "conditions": "SS/DISB = 3 V, CS = 2.6 V",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Soft-start/disable comparator threshold",+          "symbol": "",+          "kind": "electrical",+          "unit": "V",+          "min": 0.44,+          "typ": 0.5,+          "max": 0.56,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "DELAB/DELCD output voltage",+          "symbol": "V",+          "kind": "electrical",+          "unit": "V",+          "min": 0.45,+          "typ": 0.5,+          "max": 0.55,+          "conditions": "ADS = CS = 0 V",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "DELAB/DELCD output voltage",+          "symbol": "V",+          "kind": "electrical",+          "unit": "V",+          "min": 1.9,+          "typ": 2,+          "max": 2.1,+          "conditions": "ADS = 0 V, CS = 2 V",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Output delay",+          "symbol": "tDELAY",+          "kind": "electrical",+          "unit": "ns",+          "min": 450,+          "typ": 560,+          "max": 620,+          "conditions": "ADS = CS = 0 V",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "High-level output voltage (all outputs)",+          "symbol": "VOH",+          "kind": "electrical",+          "unit": "mV",+          "min": 250,+          "typ": null,+          "max": 420,+          "conditions": "IOUT = –10 mA, VDD to output",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Low-level output voltage (all outputs)",+          "symbol": "VOL",+          "kind": "electrical",+          "unit": "mV",+          "min": 150,+          "typ": null,+          "max": 270,+          "conditions": "IOUT = 10 mA",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Rise time",+          "symbol": "tR",+          "kind": "electrical",+          "unit": "ns",+          "min": 20,+          "typ": 35,+          "max": 35,+          "conditions": "CLOAD = 100 pF",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Fall time",+          "symbol": "tF",+          "kind": "electrical",+          "unit": "ns",+          "min": 20,+          "typ": 35,+          "max": 35,+          "conditions": "CLOAD = 100 pF",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "EAOUT to RAMP input offset voltage",+          "symbol": "",+          "kind": "electrical",+          "unit": "V",+          "min": 0.7,+          "typ": 0.85,+          "max": 1.05,+          "conditions": "RAMP = 0 V, DELAB = DELCD = REF",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Minimum phase shift",+          "symbol": "",+          "kind": "electrical",+          "unit": "%",+          "min": 0,+          "typ": 0.85,+          "max": 1.5,+          "conditions": "RAMP = 0 V, EAOUT = 650 mV (OUTA to OUTC, OUTB to OUTD)",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Delay",+          "symbol": "tDELAY",+          "kind": "electrical",+          "unit": "ns",+          "min": 70,+          "typ": 120,+          "max": 120,+          "conditions": "0 V < RAMP < 2.5 V, EAOUT = 1.2 V, DELAB = DELCD = REF",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "RAMP bias current",+          "symbol": "IR(bias)",+          "kind": "electrical",+          "unit": "μA",+          "min": -5,+          "typ": null,+          "max": 5,+          "conditions": "RAMP < 5 V, CT = 2.2 V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "RAMP sink current",+          "symbol": "IR(sink)",+          "kind": "electrical",+          "unit": "mA",+          "min": 11,+          "typ": 19,+          "max": 19,+          "conditions": "RAMP = 5 V, CT = 2.6 V",+          "source_page": 6,+          "source": "datasheet"+        }+      ]     }   },   "variants": [],@@ -293,4 +1020,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}