component
UCC2813QPWR-3Q1
Public Made by Adomby adom
Texas Instruments DC-DC Controllers, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# UCC2813QPWR-3Q1++**Texas Instruments** · DC-DC Controllers · TSSOP-8++UCC2813QPWR-3Q1 from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Error amplifier output and PWM comparator input; feedback loop compensation is applied between this pin and the FB pin; clamped by internal soft-start to 4ms ramp from 0V on device startup or after overcurrent fault. |+| 2 | FB | input | Inverting input of the error amplifier; receives feedback signal for output voltage regulation; voltage range −0.1V to 6V or VVCC, whichever is smaller. |+| 3 | CS | input | Current sense comparator input for both PWM and overcurrent functions with 100ns leading-edge blanking; maximum input signal 0.9V to 1.1V with 1.65V/V gain typical; input bias current ±200nA. |+| 4 | RC | input | Oscillator timing programming pin; external resistor and capacitor program switching frequency from 1kHz to 1MHz and maximum duty cycle; voltage range −0.1V to 6V or VVCC. |+| 5 | GND | power_in | Reference ground for all device functions and power supply ground; low-current path for all return signals to minimize noise coupling. |+| 6 | OUT | output | High-current CMOS totem-pole output capable of driving MOSFET gates with ±1A peak current; output range −0.1V to VVCC; pulled low during UVLO; includes on-chip zener clamp to VCC. |+| 7 | VCC | power_in | Bias power supply input; typically 11V from low-impedance source during normal operation through current-limiting resistor; internal zener clamp at 13.5V typical; UVLO thresholds 4.1V turn-on, 3.6V turn-off for this -3 variant. |+| 8 | REF | output | 4V precision voltage reference output (±1.5% tolerance at 25°C) for error amplifier and internal biasing; source capability 5mA; requires 0.1µF ceramic bypass capacitor to GND; pulled low through 5kΩ internal resistor when VCC is 1V to UVLO threshold. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-8 |+| Category | Power Supply Chip |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC2813QPWR-3Q1`+- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`+- 3D model: TSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `ucc2813qpwr-3q1-etched.step` / `ucc2813qpwr-3q1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc2813qpwr-3q1.step` / `ucc2813qpwr-3q1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc2813-0-q1) (47 pp, sha256 `114dd59e68535e9e`, retrieved 2026-10-03, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc2813qpwr-3q1-datasheet.pdf)
page.jsonadded+158@@ -0,0 +1,158 @@+{+ "slug": "ucc2813qpwr-3q1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Controllers, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "ucc2813qpwr-3q1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ucc2813qpwr-3q1.kicad_sym",+ "ucc2813qpwr-3q1.kicad_mod",+ "ucc2813qpwr-3q1.glb",+ "ucc2813qpwr-3q1.step",+ "ucc2813qpwr-3q1.lbr",+ "docs/hero.png",+ "docs/ucc2813qpwr-3q1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ucc2813qpwr-3q1-hero.glb",+ "ucc2813qpwr-3q1-hero.overlay.json"+ ],+ "component": {+ "mpn": "UCC2813QPWR-3Q1",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-8",+ "pin_count": 8,+ "category": "Power Supply Chip",+ "subcategory": "DC-DC Controllers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ucc2813-0-q1",+ "parts": {+ "symbol": "ucc2813qpwr-3q1.kicad_sym",+ "footprint": "ucc2813qpwr-3q1.kicad_mod",+ "model_3d": "ucc2813qpwr-3q1-hero.glb",+ "model_3d_plain": "ucc2813qpwr-3q1.glb",+ "model_3d_step": "ucc2813qpwr-3q1-etched.step",+ "model_3d_step_plain": "ucc2813qpwr-3q1.step",+ "lbr": "ucc2813qpwr-3q1.lbr"+ },+ "distributor_links": {+ "lcsc": 2658570,+ "digikey": "296-22002-2-ND",+ "mouser": "595-UCC2813QPWR-3Q1"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T04:38:19Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-22002-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-UCC2813QPWR-3Q1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output and PWM comparator input; feedback loop compensation is applied between this pin and the FB pin; clamped by internal soft-start to 4ms ramp from 0V on device startup or after overcurrent fault."+ },+ {+ "number": "2",+ "name": "FB",+ "type": "input",+ "description": "Inverting input of the error amplifier; receives feedback signal for output voltage regulation; voltage range −0.1V to 6V or VVCC, whichever is smaller."+ },+ {+ "number": "3",+ "name": "CS",+ "type": "input",+ "description": "Current sense comparator input for both PWM and overcurrent functions with 100ns leading-edge blanking; maximum input signal 0.9V to 1.1V with 1.65V/V gain typical; input bias current ±200nA."+ },+ {+ "number": "4",+ "name": "RC",+ "type": "input",+ "description": "Oscillator timing programming pin; external resistor and capacitor program switching frequency from 1kHz to 1MHz and maximum duty cycle; voltage range −0.1V to 6V or VVCC."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Reference ground for all device functions and power supply ground; low-current path for all return signals to minimize noise coupling."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "High-current CMOS totem-pole output capable of driving MOSFET gates with ±1A peak current; output range −0.1V to VVCC; pulled low during UVLO; includes on-chip zener clamp to VCC."+ },+ {+ "number": "7",+ "name": "VCC",+ "type": "power_in",+ "description": "Bias power supply input; typically 11V from low-impedance source during normal operation through current-limiting resistor; internal zener clamp at 13.5V typical; UVLO thresholds 4.1V turn-on, 3.6V turn-off for this -3 variant."+ },+ {+ "number": "8",+ "name": "REF",+ "type": "output",+ "description": "4V precision voltage reference output (±1.5% tolerance at 25°C) for error amplifier and internal biasing; source capability 5mA; requires 0.1µF ceramic bypass capacitor to GND; pulled low through 5kΩ internal resistor when VCC is 1V to UVLO threshold."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 35,+ "cost_usd": 0.2589,+ "at": "2026-10-03T04:37:56"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ucc2813-0-q1",+ "pages": 47,+ "sha256": "114dd59e68535e9e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}