← Commit history

Initial commit: component/ucc2808aqdr-2q1

Ray ·330ddb05af ·
2 files changed +186
README.mdadded+45
@@ -0,0 +1,45 @@+# UCC2808AQDR-2Q1++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-8++UCC2808AQDR-2Q1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | bidirectional | Error amplifier output and PWM comparator input; sources and sinks current with internal current limiting; forcing low externally sets duty cycle to zero. |+| 2 | FB | input | Inverting input of error amplifier; input bias current ±1μA; keep trace length and parasitic capacitance minimal for best stability. |+| 3 | CS | input | PWM input, peak current and overcurrent comparator; maximum input signal 0.45V to 0.55V at COMP=5V; overcurrent threshold 0.65V to 0.85V; internal MOSFET discharges sensing capacitor each clock cycle. |+| 4 | RC | input | Oscillator programming pin; internally connected between VDD and GND; use RC network with timing resistor 10kΩ to 200kΩ and capacitor 100pF to 1000pF to GND. |+| 5 | GND | power_in | Reference ground for all functions and power ground; strongly recommended to use low impedance PCB ground plane due to high current and high frequency operation. |+| 6 | OUTB | output | High current output stage driving MOSFET gate; 500mA peak pull current and 1A peak sink current; output low 0.5V to 1.1V at 100mA, output high VDD-1V to VDD-0.5V; rise/fall time 25-60ns with 1nF load. |+| 7 | OUTA | output | High current output stage driving MOSFET gate; 500mA peak pull current and 1A peak sink current; output low 0.5V to 1.1V at 100mA, output high VDD-1V to VDD-0.5V; rise/fall time 25-60ns with 1nF load. |+| 8 | VDD | power_in | Power supply input; operating voltage 5V to 14V (UCC2808A-2Q1); operating current 1mA typical, 2mA maximum excluding external oscillator network; requires 10μF electrolytic and 0.1μF ceramic bypass capacitors placed close to pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC2808AQDR-2Q1`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `ucc2808aqdr-2q1-etched.step` / `ucc2808aqdr-2q1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc2808aqdr-2q1.step` / `ucc2808aqdr-2q1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc2808a-2q1) (22 pp, sha256 `c8a6b7947402ee8a`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc2808aqdr-2q1-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "ucc2808aqdr-2q1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc2808aqdr-2q1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc2808aqdr-2q1.kicad_sym",+    "ucc2808aqdr-2q1.kicad_mod",+    "ucc2808aqdr-2q1.glb",+    "ucc2808aqdr-2q1.step",+    "ucc2808aqdr-2q1.lbr",+    "docs/hero.png",+    "docs/ucc2808aqdr-2q1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC2808AQDR-2Q1",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc2808a-2q1",+    "parts": {+      "symbol": "ucc2808aqdr-2q1.kicad_sym",+      "footprint": "ucc2808aqdr-2q1.kicad_mod",+      "model_3d": "ucc2808aqdr-2q1-etched.glb",+      "model_3d_plain": "ucc2808aqdr-2q1.glb",+      "model_3d_step": "ucc2808aqdr-2q1-etched.step",+      "model_3d_step_plain": "ucc2808aqdr-2q1.step",+      "lbr": "ucc2808aqdr-2q1.lbr"+    },+    "distributor_links": {+      "lcsc": "C702420"+    },+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "bidirectional",+        "description": "Error amplifier output and PWM comparator input; sources and sinks current with internal current limiting; forcing low externally sets duty cycle to zero."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Inverting input of error amplifier; input bias current ±1μA; keep trace length and parasitic capacitance minimal for best stability."+      },+      {+        "number": "3",+        "name": "CS",+        "type": "input",+        "description": "PWM input, peak current and overcurrent comparator; maximum input signal 0.45V to 0.55V at COMP=5V; overcurrent threshold 0.65V to 0.85V; internal MOSFET discharges sensing capacitor each clock cycle."+      },+      {+        "number": "4",+        "name": "RC",+        "type": "input",+        "description": "Oscillator programming pin; internally connected between VDD and GND; use RC network with timing resistor 10kΩ to 200kΩ and capacitor 100pF to 1000pF to GND."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Reference ground for all functions and power ground; strongly recommended to use low impedance PCB ground plane due to high current and high frequency operation."+      },+      {+        "number": "6",+        "name": "OUTB",+        "type": "output",+        "description": "High current output stage driving MOSFET gate; 500mA peak pull current and 1A peak sink current; output low 0.5V to 1.1V at 100mA, output high VDD-1V to VDD-0.5V; rise/fall time 25-60ns with 1nF load."+      },+      {+        "number": "7",+        "name": "OUTA",+        "type": "output",+        "description": "High current output stage driving MOSFET gate; 500mA peak pull current and 1A peak sink current; output low 0.5V to 1.1V at 100mA, output high VDD-1V to VDD-0.5V; rise/fall time 25-60ns with 1nF load."+      },+      {+        "number": "8",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input; operating voltage 5V to 14V (UCC2808A-2Q1); operating current 1mA typical, 2mA maximum excluding external oscillator network; requires 10μF electrolytic and 0.1μF ceramic bypass capacitors placed close to pin."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 22,+        "cost_usd": 0.2419,+        "at": "2026-09-24T09:46:48"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ucc2808a-2q1",+        "pages": 22,+        "sha256": "c8a6b7947402ee8a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file