component
UCC28086PWR
Public Made by Adomby adom
Texas Instruments DC-DC Controllers, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# UCC28086PWR++**Texas Instruments** · DC-DC Controllers · TSSOP-8++UCC28086PWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUTB | output | Alternating high-current output stage that drives a power MOSFET gate with 0.5-A peak source and 1-A peak sink, switching at half the oscillator frequency. |+| 2 | GND | power_in | Reference ground and power ground for all functions; a low-impedance ground plane is recommended due to high currents and high-frequency operation. |+| 3 | RT | input | Oscillator programming pin; an external resistor to ground (recommended 25 kΩ to 698 kΩ) sets the frequency, with nominal pin voltage of 1.5 V (1.2 V to 1.6 V). |+| 4 | CS | input | Current-sense input to the PWM comparator, cycle-by-cycle peak current comparator and overcurrent comparator (0.75 V typ threshold), with internal discharge MOSFET for the filter capacitor. |+| 5 | ISET | input | Slope compensation current selection; a resistor RSET (minimum 5 kΩ) to ground programs the ramp, with ISLOPE = 5 x ISET. |+| 6 | CTRL | input | Error voltage input to the PWM comparator, typically driven from an opto-coupler, with internal divider ratio of 0.45. |+| 7 | VDD | power_in | Power input connection with 15 V absolute maximum (IDD < 10 mA); bypass to GND with a 1-µF capacitor placed close to the chip. |+| 8 | OUTA | output | Alternating high-current output stage that drives a power MOSFET gate with 0.5-A peak source and 1-A peak sink, switching at half the oscillator frequency. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-8 |+| Category | Power Supply Chip |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC28086PWR`+- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`+- 3D model: TSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `ucc28086pwr-etched.step` / `ucc28086pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc28086pwr.step` / `ucc28086pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc28086.pdf) (28 pp, sha256 `19bab60962d5c6f5`, retrieved 2026-10-08, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc28086pwr-datasheet.pdf)
page.jsonadded+199@@ -0,0 +1,199 @@+{+ "slug": "ucc28086pwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Controllers, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "ucc28086pwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ucc28086pwr.kicad_sym",+ "ucc28086pwr.kicad_mod",+ "ucc28086pwr.glb",+ "ucc28086pwr.step",+ "ucc28086pwr.lbr",+ "docs/hero.png",+ "docs/ucc28086pwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ucc28086pwr-hero.glb",+ "ucc28086pwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "UCC28086PWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-8",+ "pin_count": 8,+ "category": "Power Supply Chip",+ "subcategory": "DC-DC Controllers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28086.pdf",+ "parts": {+ "symbol": "ucc28086pwr.kicad_sym",+ "footprint": "ucc28086pwr.kicad_mod",+ "model_3d": "ucc28086pwr-hero.glb",+ "model_3d_plain": "ucc28086pwr.glb",+ "model_3d_step": "ucc28086pwr-etched.step",+ "model_3d_step_plain": "ucc28086pwr.step",+ "lbr": "ucc28086pwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2657968",+ "digikey": "296-34868-2-ND",+ "mouser": "595-UCC28086PWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:49:09Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-34868-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-UCC28086PWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OUTB",+ "type": "output",+ "description": "Alternating high-current output stage that drives a power MOSFET gate with 0.5-A peak source and 1-A peak sink, switching at half the oscillator frequency."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Reference ground and power ground for all functions; a low-impedance ground plane is recommended due to high currents and high-frequency operation."+ },+ {+ "number": "3",+ "name": "RT",+ "type": "input",+ "description": "Oscillator programming pin; an external resistor to ground (recommended 25 kΩ to 698 kΩ) sets the frequency, with nominal pin voltage of 1.5 V (1.2 V to 1.6 V)."+ },+ {+ "number": "4",+ "name": "CS",+ "type": "input",+ "description": "Current-sense input to the PWM comparator, cycle-by-cycle peak current comparator and overcurrent comparator (0.75 V typ threshold), with internal discharge MOSFET for the filter capacitor."+ },+ {+ "number": "5",+ "name": "ISET",+ "type": "input",+ "description": "Slope compensation current selection; a resistor RSET (minimum 5 kΩ) to ground programs the ramp, with ISLOPE = 5 x ISET."+ },+ {+ "number": "6",+ "name": "CTRL",+ "type": "input",+ "description": "Error voltage input to the PWM comparator, typically driven from an opto-coupler, with internal divider ratio of 0.45."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Power input connection with 15 V absolute maximum (IDD < 10 mA); bypass to GND with a 1-µF capacitor placed close to the chip."+ },+ {+ "number": "8",+ "name": "OUTA",+ "type": "output",+ "description": "Alternating high-current output stage that drives a power MOSFET gate with 0.5-A peak source and 1-A peak sink, switching at half the oscillator frequency."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The PW (TSSOP) pin numbers were not printed as a labeled list in the extracted text. They were infer; The phrase 'and 180 degrees out of phase with OUTA' is not stated verbatim in the text; the datashee; Page 10 refers to the RT-to-GND trace as 'pin 4 to pin 5' and 'pin 6 and pin 8' for RT and OUTB in T"+ ],+ "pages_sent": 15,+ "cost_usd": 0.0947,+ "at": "2026-10-08T15:48:54"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/ucc28086.pdf",+ "pages": 28,+ "sha256": "19bab60962d5c6f5",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ucc28086pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "cf28a51742b2e31065e201d1b313207140cbfb49062efd938788f7a310d02738",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ucc28086pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b76b70e9da89dc4ea5306df0bb940070d5b78c99f83a08378275022d1f414a99",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}