component
UCC25710DWR
Public Made by Adomby adom
Texas Instruments LED Drivers, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+57@@ -0,0 +1,57 @@+# UCC25710DWR++**Texas Instruments** · LED Drivers · SOIC-20-300mil++UCC25710DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | DC power supply input; operating range 11V to 18V with UVLO threshold at 9.3V. |+| 2 | GD1 | output | Gate drive output operating 180° out of phase from GD2 with 500ns fixed dead time. |+| 3 | GD2 | output | Gate drive output operating 180° out of phase from GD1 with 500ns fixed dead time. |+| 4 | GND | power_in | Ground reference pin for controller and low-side return for gate drive signals. |+| 5 | VREF | power_in | Internal 5V reference output capable of supplying 10mA external current. |+| 6 | LEDSW | output | LED switch control output low during DIM low or LLC disabled, high during soft-start. |+| 7 | DTY | bidirectional | Duty-cycle proportional voltage in range 100mV to 2.6V calculated as 2.5V(1-D)+0.1V. |+| 8 | DADJ | bidirectional | Duty-cycle adjust capacitor input where 20µA current source sets positive ramp slope. |+| 9 | DIM | input | PWM dimming input controlling average load current by switching LED switch and gate drives. |+| 10 | BLON | input | Backlight enable input active high at approximately 1.2V enabling VREF output. |+| 11 | UV | input | Undervoltage monitor with 2.4V threshold and 240mV hysteresis triggering soft-start on recovery. |+| 12 | OV | input | Overvoltage monitor with 2.6V threshold and 240mV hysteresis triggering soft-start on recovery. |+| 13 | CL | input | Current limit input with 0.95V threshold for shutdown/retry and 1.9V threshold for latching shutdown. |+| 14 | DSR | bidirectional | Dimming slew rate capacitor input where ±44µA current programs VCO frequency change rate; disables GD if below 0.8V. |+| 15 | CREF | input | Current reference input setting LED regulating voltage in range 0.5V to 2.8V. |+| 16 | CS | input | Current sense input monitored and compared to CREF voltage to regulate total LED current. |+| 17 | ICOMP | tri_state | Current compensation output tri-stated during DIM OFF-time; disables GD if pulled below 0.8V. |+| 18 | SS | bidirectional | Soft-start capacitor input charged by 2.5µA source to 4.2V threshold enabling PWM dimming. |+| 19 | FMAX | bidirectional | Maximum frequency setting input where resistor to ground programs frequency range difference. |+| 20 | FMIN | bidirectional | Minimum frequency setting input where resistor to ground programs minimum frequency down to 30kHz. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-20-300mil |+| Category | LED Drivers |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `UCC25710DWR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `ucc25710dwr-etched.step` / `ucc25710dwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc25710dwr.step` / `ucc25710dwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc25710) (41 pp, sha256 `312c815717ee375c`, retrieved 2026-09-26, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc25710dwr-datasheet.pdf)
page.jsonadded+228@@ -0,0 +1,228 @@+{+ "slug": "ucc25710dwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LED Drivers, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "ucc25710dwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ucc25710dwr.kicad_sym",+ "ucc25710dwr.kicad_mod",+ "ucc25710dwr.glb",+ "ucc25710dwr.step",+ "ucc25710dwr.lbr",+ "docs/hero.png",+ "docs/ucc25710dwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "UCC25710DWR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-20-300mil",+ "pin_count": 20,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ucc25710",+ "parts": {+ "symbol": "ucc25710dwr.kicad_sym",+ "footprint": "ucc25710dwr.kicad_mod",+ "model_3d": "ucc25710dwr-etched.glb",+ "model_3d_plain": "ucc25710dwr.glb",+ "model_3d_step": "ucc25710dwr-etched.step",+ "model_3d_step_plain": "ucc25710dwr.step",+ "lbr": "ucc25710dwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C414605",+ "digikey": "UCC25710DWR-ND",+ "mouser": "595-UCC25710DWR"+ },+ "distributor_check": {+ "checked_at": "2026-09-26T19:07:15Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "UCC25710DWR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-UCC25710DWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC",+ "type": "power_in",+ "description": "DC power supply input; operating range 11V to 18V with UVLO threshold at 9.3V."+ },+ {+ "number": "2",+ "name": "GD1",+ "type": "output",+ "description": "Gate drive output operating 180° out of phase from GD2 with 500ns fixed dead time."+ },+ {+ "number": "3",+ "name": "GD2",+ "type": "output",+ "description": "Gate drive output operating 180° out of phase from GD1 with 500ns fixed dead time."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference pin for controller and low-side return for gate drive signals."+ },+ {+ "number": "5",+ "name": "VREF",+ "type": "power_in",+ "description": "Internal 5V reference output capable of supplying 10mA external current."+ },+ {+ "number": "6",+ "name": "LEDSW",+ "type": "output",+ "description": "LED switch control output low during DIM low or LLC disabled, high during soft-start."+ },+ {+ "number": "7",+ "name": "DTY",+ "type": "bidirectional",+ "description": "Duty-cycle proportional voltage in range 100mV to 2.6V calculated as 2.5V(1-D)+0.1V."+ },+ {+ "number": "8",+ "name": "DADJ",+ "type": "bidirectional",+ "description": "Duty-cycle adjust capacitor input where 20µA current source sets positive ramp slope."+ },+ {+ "number": "9",+ "name": "DIM",+ "type": "input",+ "description": "PWM dimming input controlling average load current by switching LED switch and gate drives."+ },+ {+ "number": "10",+ "name": "BLON",+ "type": "input",+ "description": "Backlight enable input active high at approximately 1.2V enabling VREF output."+ },+ {+ "number": "11",+ "name": "UV",+ "type": "input",+ "description": "Undervoltage monitor with 2.4V threshold and 240mV hysteresis triggering soft-start on recovery."+ },+ {+ "number": "12",+ "name": "OV",+ "type": "input",+ "description": "Overvoltage monitor with 2.6V threshold and 240mV hysteresis triggering soft-start on recovery."+ },+ {+ "number": "13",+ "name": "CL",+ "type": "input",+ "description": "Current limit input with 0.95V threshold for shutdown/retry and 1.9V threshold for latching shutdown."+ },+ {+ "number": "14",+ "name": "DSR",+ "type": "bidirectional",+ "description": "Dimming slew rate capacitor input where ±44µA current programs VCO frequency change rate; disables GD if below 0.8V."+ },+ {+ "number": "15",+ "name": "CREF",+ "type": "input",+ "description": "Current reference input setting LED regulating voltage in range 0.5V to 2.8V."+ },+ {+ "number": "16",+ "name": "CS",+ "type": "input",+ "description": "Current sense input monitored and compared to CREF voltage to regulate total LED current."+ },+ {+ "number": "17",+ "name": "ICOMP",+ "type": "tri_state",+ "description": "Current compensation output tri-stated during DIM OFF-time; disables GD if pulled below 0.8V."+ },+ {+ "number": "18",+ "name": "SS",+ "type": "bidirectional",+ "description": "Soft-start capacitor input charged by 2.5µA source to 4.2V threshold enabling PWM dimming."+ },+ {+ "number": "19",+ "name": "FMAX",+ "type": "bidirectional",+ "description": "Maximum frequency setting input where resistor to ground programs frequency range difference."+ },+ {+ "number": "20",+ "name": "FMIN",+ "type": "bidirectional",+ "description": "Minimum frequency setting input where resistor to ground programs minimum frequency down to 30kHz."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 41,+ "cost_usd": 0.4327,+ "at": "2026-09-26T19:06:56"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ucc25710",+ "pages": 41,+ "sha256": "312c815717ee375c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 20,+ "described": 20,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}