← Commit history
Publish 0.1.1
4 files changed
+552−536
README.md+66−57@@ -8,22 +8,22 @@ UCC21755QDWRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions | Pin | Name | Type | Function | |---|---|---|---|-| 1 | AIN | input | Isolated analog sensing input (0.6 V to 4.5 V referenced to COM) that should have a small capacitor in parallel to COM for noise immunity and be tied to COM if unused. |-| 2 | DESAT | input | Desaturation overcurrent protection input, to be tied to COM if unused. |-| 3 | COM | power_in | Common ground reference of the output side, connected to the emitter pin of an IGBT or the source pin of a SiC MOSFET. |-| 4 | OUTH | output | Gate driver output pullup (source) of the split output. |-| 5 | VDD | power_in | Positive supply rail for gate drive voltage (13 V to 33 V VDD-COM recommended), bypassed with a >10-µF capacitor to COM placed close to the pin. |-| 6 | OUTL | output | Gate driver output pulldown (sink) of the split output. |-| 7 | CLMPI | input | Internal active Miller clamp input connected directly to the gate of the power transistor, left floating or tied to VEE if unused. |-| 8 | VEE | power_in | Negative supply rail for gate drive voltage (0 V to -16 V VEE-COM recommended), bypassed with a >10-µF capacitor to COM placed close to the pin. |+| 1 | AIN | input | Isolated analog sensing input referenced to COM, with a small capacitor to COM recommended for noise immunity; recommended range is 0.6 V to 4.5 V, and it should be tied to COM if unused. |+| 2 | DESAT | input | Desaturation current protection input referenced to COM, with absolute maximum range COM-0.3 V to VDD+0.3 V, and it should be tied to COM if unused. |+| 3 | COM | power_in | Common ground reference for the output side, connected to the emitter of an IGBT or the source of a SiC MOSFET. |+| 4 | OUTH | output | Gate driver output pull-up stage. |+| 5 | VDD | power_in | Positive gate-drive supply rail with recommended range 13 V to 33 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin. |+| 6 | OUTL | output | Gate driver output pull-down stage. |+| 7 | CLMPI | input | Internal active Miller clamp input connected directly to the power transistor gate; leave floating or tie to VEE if unused. |+| 8 | VEE | power_in | Negative gate-drive supply rail with recommended range -16 V to 0 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin. | | 9 | GND | power_in | Input-side power supply and logic ground reference. |-| 10 | IN+ | input | Non-inverting gate driver control input, tied to VCC if unused. |-| 11 | IN- | input | Inverting gate driver control input, tied to GND if unused. |-| 12 | RDY | output | Open-drain power good output for VCC-GND and VDD-COM that can be paralleled with other RDY signals. |-| 13 | FLT | output | Active-low open-drain fault alarm output upon overcurrent or short circuit that can be paralleled with other faults. |-| 14 | RST/EN | input | Enables or shuts down the output side when high or low, and resets the DESAT fault on FLT if held low for more than 1000 ns; tie to IN+ for automatic reset. |-| 15 | VCC | power_in | Input power supply from 3 V to 5.5 V, bypassed with a >1-µF capacitor to GND placed close to the pin. |-| 16 | APWM | output | Isolated analog sensing PWM output, left floating if unused. |+| 10 | IN+ | input | Non-inverting gate driver control input referenced to GND, with high-level input of at least 0.7×VCC; tie to VCC if unused. |+| 11 | IN- | input | Inverting gate driver control input referenced to GND; tie to GND if unused. |+| 12 | RDY | output | Open-drain power-good output for VCC-GND and VDD-COM that can be paralleled with other RDY signals. |+| 13 | FLT | output | Open-drain active-low fault alarm output upon overcurrent or short circuit that can be paralleled with other fault signals. |+| 14 | RST/EN | input | Enables or shuts down the output side (FET turned off by a regular turn-off when low) and resets a DESAT fault signaled on FLT when held low for more than 1000 ns; tie to IN+ for automatic reset. |+| 15 | VCC | power_in | Input-side power supply from 3 V to 5.5 V, to be bypassed with a >1 µF capacitor to GND placed close to the pin. |+| 16 | APWM | output | Isolated analog sensing PWM output; leave floating if unused. | ## Key specifications @@ -40,56 +40,65 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| VCC UVLO rising threshold | VVCC_ON | 2.55 | 2.7 | 2.85 | V | VCC - GND | 7 |-| VCC UVLO falling threshold | VVCC_OFF | 2.35 | 2.5 | 2.65 | V | VCC - GND | 7 |+| VCC supply voltage (VCC-GND) | VCC | 3 | | 5.5 | V | | 4 |+| VDD supply voltage (VDD-COM) | VDD | 13 | | 33 | V | | 4 |+| VEE supply voltage (VEE-COM) | VEE | -16 | | 0 | V | | 4 |+| VDD-VEE supply voltage | VMAX | | | 33 | V | | 4 |+| Low level input voltage (IN+, IN-, RST/EN) | | 0 | | | V | Reference to GND | 4 |+| Analog sensing voltage range (AIN) | VAIN | 0.6 | | 4.5 | V | Reference to COM | 4 |+| Minimum pulse width that resets the fault (RST/EN) | tRST/EN | 1000 | | | ns | | 4 |+| Ambient temperature | TA | -40 | | 125 | °C | | 4 |+| Junction temperature | TJ | -40 | | 150 | °C | | 4 |+| VCC-GND absolute maximum | VCC | -0.3 | | 6 | V | | 4 |+| VDD-COM absolute maximum | VDD | -0.3 | | 36 | V | | 4 |+| VEE-COM absolute maximum | VEE | -17.5 | | 0.3 | V | | 4 |+| VDD-VEE absolute maximum | VMAX | -0.3 | | 36 | V | | 4 |+| AIN reference to COM absolute maximum | | -0.3 | | 5 | V | Reference to COM | 4 |+| FLT and RDY pin input current | IFLT, IRDY | | | 20 | mA | | 4 |+| APWM pin output current | IAPWM | | | 20 | mA | | 4 |+| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |+| VCC UVLO on threshold | VVCC_ON | 2.55 | 2.7 | 2.85 | V | | 7 |+| VCC UVLO off threshold | VVCC_OFF | 2.35 | 2.5 | 2.65 | V | | 7 | | VCC UVLO on delay to output high | tVCC+ to OUT | 28 | 37.8 | 50 | µs | IN+ = VCC, IN- = GND | 7 |-| VCC UVLO off delay to output low | tVCC- to OUT | 5 | 10 | 15 | µs | IN+ = VCC, IN- = GND | 7 |-| VCC UVLO on delay to RDY high | tVCC+ to RDY | 30 | 37.8 | 50 | µs | RST/EN = VCC | 7 |-| VCC UVLO off delay to RDY low | tVCC- to RDY | 5 | 10 | 15 | µs | RST/EN = VCC | 7 |-| VDD UVLO rising threshold | VVDD_ON | 10.5 | 12 | 12.8 | V | VDD - COM | 7 |-| VDD UVLO falling threshold | VVDD_OFF | 9.9 | 10.7 | 11.8 | V | VDD - COM | 7 |+| VCC UVLO off delay to output low | tVCC- to OUT | 5 | 10 | 15 | µs | | 7 |+| VDD UVLO on threshold | VVDD_ON | 10.5 | 12 | 12.8 | V | | 7 |+| VDD UVLO off threshold | VVDD_OFF | 9.9 | 10.7 | 11.8 | V | | 7 | | VDD UVLO on delay to output high | tVDD+ to OUT | 2 | 5 | 8 | µs | IN+ = VCC, IN- = GND | 7 |-| VCC quiescent current, output high | IVCCQ | 2.5 | 3 | 4 | mA | OUT(H) = High, fS = 0Hz, AIN=2V | 7 |-| VCC quiescent current, output low | IVCCQ | 1.45 | 2 | 2.75 | mA | OUT(L) = Low, fS = 0Hz, AIN=2V | 7 |-| VDD quiescent current, output high | IVDDQ | 3.6 | 4 | 5.9 | mA | OUT(H) = High, fS = 0Hz, AIN=2V | 7 |-| VDD quiescent current, output low | IVDDQ | 3.1 | 3.7 | 5.3 | mA | OUT(L) = Low, fS = 0Hz, AIN=2V | 7 |-| IN+, IN- and RST/EN deglitch filter time | TINFIL | 28 | 40 | 60 | ns | fS = 50kHz | 7 |-| Deglitch filter time to reset FLT | TRSTFIL | 500 | 650 | 800 | ns | | 7 |-| Output active pull down on OUTL | VOUTPD | 1.5 | 2 | 2.5 | V | IOUTL(typ) = 0.1×IOUTL(typ), VDD=OPEN, VEE=COM | 7 |+| VCC quiescent current, OUT(H) high | IVCCQ | 2.5 | 3 | 4 | mA | OUT(H) = High, fS = 0Hz, AIN=2V | 7 |+| VCC quiescent current, OUT(L) low | IVCCQ | 1.45 | 2 | 2.75 | mA | OUT(L) = Low, fS = 0Hz, AIN=2V | 7 |+| VDD quiescent current, OUT(H) high | IVDDQ | 3.6 | 4 | 5.9 | mA | OUT(H) = High, fS = 0Hz, AIN=2V | 7 |+| VDD quiescent current, OUT(L) low | IVDDQ | 3.1 | 3.7 | 5.3 | mA | OUT(L) = Low, fS = 0Hz, AIN=2V | 7 |+| Input high threshold (IN+, IN-, RST/EN) | VINH | 1.85 | | 2.31 | V | VCC=3.3V | 7 |+| Input low threshold (IN+, IN-, RST/EN) | VINL | 0.99 | | 1.52 | V | | 7 |+| IN+, IN- and RST/EN deglitch filter time (ON and OFF) | TINFIL | 28 | 40 | 60 | ns | fS = 50kHz | 7 |+| Low level output voltage | VOUTL | | | 60 | mV | IOUTL= 0.2A | 7 |+| High level output voltage | VOUTH | 17.5 | | | V | IOUTH = -0.2A, VDD = 18V | 7 |+| Output active pulldown on OUTL | VOUTPD | 1.5 | 2 | 2.5 | V | IOUTL(typ) = 0.1×IOUTL(typ), VDD=OPEN, VEE=COM | 7 | | Miller clamp threshold voltage | VCLMPTH | 1.5 | 2 | 2.5 | V | Reference to VEE | 8 |-| Blanking capacitor charge current | ICHG | 430 | 500 | 570 | µA | VDESAT = 2.0V | 8 |+| Leading edge blank time (DESAT) | tDESATLEB | 150 | 200 | 450 | ns | | 8 | | DESAT detection threshold | VDESAT | 4.6 | 5 | 5.47 | V | | 8 |-| DESAT leading edge blank time | tDESATLEB | 150 | 200 | 450 | ns | | 8 |-| DESAT deglitch filter | tDESATFIL | 50 | 140 | 230 | ns | | 8 |+| Blanking capacitor charge current | ICHG | 430 | 500 | 570 | µA | VDESAT = 2.0V | 8 | | DESAT propagation delay to OUTL 90% | tDESATOFF | 150 | 200 | 300 | ns | | 8 |-| DESAT to FLT low delay | tDESATFLT | 400 | 580 | 750 | ns | | 8 |+| DESAT sense to FLT low delay | tDESATFLT | 400 | 580 | 750 | ns | | 8 | | Soft turn-off current on fault condition | ISTO | 250 | 400 | 570 | mA | VDD-VEE = 20 V, OUTL = 8 V | 8 |-| Internal current source | IAIN | 196 | 203 | 209 | uA | VAIN=2.5V, -40°C< TJ< 150°C | 8 |+| Internal current source (AIN) | IAIN | 196 | 203 | 209 | uA | VAIN=2.5V, -40°C< TJ< 150°C | 8 | | APWM output frequency | fAPWM | 380 | 400 | 420 | kHz | VAIN=2.5V | 8 |-| APWM duty cycle | DAPWM | 86.5 | 88 | 89.5 | % | VAIN=0.6V | 8 |-| APWM duty cycle | DAPWM | 48.5 | 50 | 51.5 | % | VAIN=2.5V | 8 |-| APWM duty cycle | DAPWM | 7.5 | 10 | 11.5 | % | VAIN=4.5V | 8 |+| APWM duty cycle at VAIN = 2.5 V | DAPWM | 48.5 | 50 | 51.5 | % | VAIN=2.5V | 8 |+| Output mute time on fault (reset via RST/EN) | tFLTMUTE | 0.55 | | 1 | ms | Reset fault through RST/EN | 8 |+| Open drain low output voltage | VODL | | | 0.3 | V | | 8 |+| Common-mode transient immunity | CMTI | 150 | | | V/ns | | 8 | | Propagation delay time low-to-high | tPDLH | 60 | 90 | 130 | ns | | 9 | | Propagation delay time high-to-low | tPDHL | 60 | 90 | 130 | ns | | 9 |-| VCC supply voltage | VCC | -0.3 | | 6 | V | VCC - GND | 4 |-| VDD supply voltage | VDD | -0.3 | | 36 | V | VDD - COM | 4 |-| VEE supply voltage | VEE | -17.5 | | 0.3 | V | VEE - COM | 4 |-| Maximum output supply voltage | VMAX | -0.3 | | 36 | V | VDD - VEE | 4 |-| FLT and RDY pin input current | IFLT, IRDY | | | 20 | mA | | 4 |-| APWM pin output current | IAPWM | | | 20 | mA | | 4 |-| Junction temperature | TJ | -40 | | 150 | °C | | 4 |-| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |-| Input supply voltage | VCC | 3 | | 5.5 | V | VCC-GND | 4 |-| Output positive supply voltage | VDD | 13 | | 33 | V | VDD-COM | 4 |-| Output negative supply voltage | VEE | -16 | | 0 | V | VEE-COM | 4 |-| Maximum output supply voltage | VMAX | | | 33 | V | VDD-VEE | 4 |-| AIN input voltage | AIN | 0.6 | | 4.5 | V | Reference to COM | 4 |-| Minimum pulse width that reset the fault | tRST/EN | 1000 | | | ns | | 4 |-| Ambient temperature | TA | -40 | | 125 | °C | | 4 |-| Junction temperature | TJ | -40 | | 150 | °C | | 4 |-| Junction-to-ambient thermal resistance | RθJA | | 68.3 | | °C/W | DW (SOIC) 16 pins | 5 |-| Junction-to-case (top) thermal resistance | RθJC(top) | | 27.5 | | °C/W | DW (SOIC) 16 pins | 5 |-| Junction-to-board thermal resistance | RθJB | | 32.9 | | °C/W | DW (SOIC) 16 pins | 5 |+| Pulse width distortion (tPDHL-tPDLH) | PWD | | | 30 | ns | | 9 |+| Part to part skew | tsk-pp | | | 30 | ns | Rising or falling propagation delay | 9 |+| Peak source current | IOUTH | | 10 | | A | CL = 0.18µF, fS = 1kHz | 7 |+| Peak sink current | IOUTL | | 10 | | A | CL = 0.18µF, fS = 1kHz | 7 |+| Output pull-up resistance | ROUTH | | 2.5 | | Ω | IOUTH = -0.1A | 7 |+| Output pull-down resistance | ROUTL | | 0.3 | | Ω | IOUTL = 0.1A | 7 |+| Miller clamp output low clamp current | ICLMPI | | 4 | | A | VCLMPI = 0V, VEE = -2.5V | 8 |+| Junction-to-ambient thermal resistance | RθJA | | 68.3 | | °C/W | | 5 |+| Junction-to-case (top) thermal resistance | RθJC(top) | | 27.5 | | °C/W | | 5 |+| Junction-to-board thermal resistance | RθJB | | 32.9 | | °C/W | | 5 | ## CAD (KiCad official) @@ -103,7 +112,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: - **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc21755-q1.pdf) (53 pp, sha256 `59845406f83fad22`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/ucc21755qdwrq1-datasheet.pdf)
package.json+22−22@@ -1,6 +1,6 @@ { "slug": "ucc21755qdwrq1",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Gate Drive ICs, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -54,7 +54,7 @@ "mouser": "595-UCC21755QDWRQ1" }, "distributor_check": {- "checked_at": "2026-11-12T04:59:15Z",+ "checked_at": "2026-11-12T07:58:49Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-UCC21755QDWRQ1TR-ND",@@ -70,49 +70,49 @@ "number": "1", "name": "AIN", "type": "input",- "description": "Isolated analog sensing input (0.6 V to 4.5 V referenced to COM) that should have a small capacitor in parallel to COM for noise immunity and be tied to COM if unused."+ "description": "Isolated analog sensing input referenced to COM, with a small capacitor to COM recommended for noise immunity; recommended range is 0.6 V to 4.5 V, and it should be tied to COM if unused." }, { "number": "2", "name": "DESAT", "type": "input",- "description": "Desaturation overcurrent protection input, to be tied to COM if unused."+ "description": "Desaturation current protection input referenced to COM, with absolute maximum range COM-0.3 V to VDD+0.3 V, and it should be tied to COM if unused." }, { "number": "3", "name": "COM", "type": "power_in",- "description": "Common ground reference of the output side, connected to the emitter pin of an IGBT or the source pin of a SiC MOSFET."+ "description": "Common ground reference for the output side, connected to the emitter of an IGBT or the source of a SiC MOSFET." }, { "number": "4", "name": "OUTH", "type": "output",- "description": "Gate driver output pullup (source) of the split output."+ "description": "Gate driver output pull-up stage." }, { "number": "5", "name": "VDD", "type": "power_in",- "description": "Positive supply rail for gate drive voltage (13 V to 33 V VDD-COM recommended), bypassed with a >10-µF capacitor to COM placed close to the pin."+ "description": "Positive gate-drive supply rail with recommended range 13 V to 33 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin." }, { "number": "6", "name": "OUTL", "type": "output",- "description": "Gate driver output pulldown (sink) of the split output."+ "description": "Gate driver output pull-down stage." }, { "number": "7", "name": "CLMPI", "type": "input",- "description": "Internal active Miller clamp input connected directly to the gate of the power transistor, left floating or tied to VEE if unused."+ "description": "Internal active Miller clamp input connected directly to the power transistor gate; leave floating or tie to VEE if unused." }, { "number": "8", "name": "VEE", "type": "power_in",- "description": "Negative supply rail for gate drive voltage (0 V to -16 V VEE-COM recommended), bypassed with a >10-µF capacitor to COM placed close to the pin."+ "description": "Negative gate-drive supply rail with recommended range -16 V to 0 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin." }, { "number": "9",@@ -124,43 +124,43 @@ "number": "10", "name": "IN+", "type": "input",- "description": "Non-inverting gate driver control input, tied to VCC if unused."+ "description": "Non-inverting gate driver control input referenced to GND, with high-level input of at least 0.7×VCC; tie to VCC if unused." }, { "number": "11", "name": "IN-", "type": "input",- "description": "Inverting gate driver control input, tied to GND if unused."+ "description": "Inverting gate driver control input referenced to GND; tie to GND if unused." }, { "number": "12", "name": "RDY", "type": "output",- "description": "Open-drain power good output for VCC-GND and VDD-COM that can be paralleled with other RDY signals."+ "description": "Open-drain power-good output for VCC-GND and VDD-COM that can be paralleled with other RDY signals." }, { "number": "13", "name": "FLT", "type": "output",- "description": "Active-low open-drain fault alarm output upon overcurrent or short circuit that can be paralleled with other faults."+ "description": "Open-drain active-low fault alarm output upon overcurrent or short circuit that can be paralleled with other fault signals." }, { "number": "14", "name": "RST/EN", "type": "input",- "description": "Enables or shuts down the output side when high or low, and resets the DESAT fault on FLT if held low for more than 1000 ns; tie to IN+ for automatic reset."+ "description": "Enables or shuts down the output side (FET turned off by a regular turn-off when low) and resets a DESAT fault signaled on FLT when held low for more than 1000 ns; tie to IN+ for automatic reset." }, { "number": "15", "name": "VCC", "type": "power_in",- "description": "Input power supply from 3 V to 5.5 V, bypassed with a >1-µF capacitor to GND placed close to the pin."+ "description": "Input-side power supply from 3 V to 5.5 V, to be bypassed with a >1 µF capacitor to GND placed close to the pin." }, { "number": "16", "name": "APWM", "type": "output",- "description": "Isolated analog sensing PWM output, left floating if unused."+ "description": "Isolated analog sensing PWM output; leave floating if unused." } ], "provenance": {@@ -168,17 +168,17 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The pin diagram text on pages 1 and 3 is garbled by extraction, so pin numbers were taken from Table; The datasheet table gives I/O letters only. RDY and FLT are open-drain outputs and were typed as out"+ "extractor flagged: The page-3 pin figure text is scrambled in extraction, so pin positions were taken from Table 4-1 (P" ], "pages_sent": 8,- "cost_usd": 0.096,- "at": "2026-11-12T04:59:02"+ "cost_usd": 0.0515,+ "at": "2026-11-12T07:58:15" }, "datasheet": { "url": "https://www.ti.com/lit/ds/symlink/ucc21755-q1.pdf",@@ -233,7 +233,7 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "46dc2649af41dab76333d3bf6426faf08b16f04f7255bb6870c30c54d670e0bb",+ "sha256": "ea5ad95b7d2e83d65364c85bd389138078d9f2c899aaf88880827625ec38e417", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }
page.json+25−23@@ -4,7 +4,7 @@ "slug": "ucc21755qdwrq1", "title": "UCC21755QDWRQ1", "brief": "Texas Instruments Gate Drive ICs, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "595-UCC21755QDWRQ1" }, "distributor_check": {- "checked_at": "2026-11-12T04:59:15Z",+ "checked_at": "2026-11-12T07:58:49Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-UCC21755QDWRQ1TR-ND",@@ -52,49 +52,49 @@ "number": "1", "name": "AIN", "type": "input",- "description": "Isolated analog sensing input (0.6 V to 4.5 V referenced to COM) that should have a small capacitor in parallel to COM for noise immunity and be tied to COM if unused."+ "description": "Isolated analog sensing input referenced to COM, with a small capacitor to COM recommended for noise immunity; recommended range is 0.6 V to 4.5 V, and it should be tied to COM if unused." }, { "number": "2", "name": "DESAT", "type": "input",- "description": "Desaturation overcurrent protection input, to be tied to COM if unused."+ "description": "Desaturation current protection input referenced to COM, with absolute maximum range COM-0.3 V to VDD+0.3 V, and it should be tied to COM if unused." }, { "number": "3", "name": "COM", "type": "power_in",- "description": "Common ground reference of the output side, connected to the emitter pin of an IGBT or the source pin of a SiC MOSFET."+ "description": "Common ground reference for the output side, connected to the emitter of an IGBT or the source of a SiC MOSFET." }, { "number": "4", "name": "OUTH", "type": "output",- "description": "Gate driver output pullup (source) of the split output."+ "description": "Gate driver output pull-up stage." }, { "number": "5", "name": "VDD", "type": "power_in",- "description": "Positive supply rail for gate drive voltage (13 V to 33 V VDD-COM recommended), bypassed with a >10-µF capacitor to COM placed close to the pin."+ "description": "Positive gate-drive supply rail with recommended range 13 V to 33 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin." }, { "number": "6", "name": "OUTL", "type": "output",- "description": "Gate driver output pulldown (sink) of the split output."+ "description": "Gate driver output pull-down stage." }, { "number": "7", "name": "CLMPI", "type": "input",- "description": "Internal active Miller clamp input connected directly to the gate of the power transistor, left floating or tied to VEE if unused."+ "description": "Internal active Miller clamp input connected directly to the power transistor gate; leave floating or tie to VEE if unused." }, { "number": "8", "name": "VEE", "type": "power_in",- "description": "Negative supply rail for gate drive voltage (0 V to -16 V VEE-COM recommended), bypassed with a >10-µF capacitor to COM placed close to the pin."+ "description": "Negative gate-drive supply rail with recommended range -16 V to 0 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin." }, { "number": "9",@@ -106,43 +106,43 @@ "number": "10", "name": "IN+", "type": "input",- "description": "Non-inverting gate driver control input, tied to VCC if unused."+ "description": "Non-inverting gate driver control input referenced to GND, with high-level input of at least 0.7×VCC; tie to VCC if unused." }, { "number": "11", "name": "IN-", "type": "input",- "description": "Inverting gate driver control input, tied to GND if unused."+ "description": "Inverting gate driver control input referenced to GND; tie to GND if unused." }, { "number": "12", "name": "RDY", "type": "output",- "description": "Open-drain power good output for VCC-GND and VDD-COM that can be paralleled with other RDY signals."+ "description": "Open-drain power-good output for VCC-GND and VDD-COM that can be paralleled with other RDY signals." }, { "number": "13", "name": "FLT", "type": "output",- "description": "Active-low open-drain fault alarm output upon overcurrent or short circuit that can be paralleled with other faults."+ "description": "Open-drain active-low fault alarm output upon overcurrent or short circuit that can be paralleled with other fault signals." }, { "number": "14", "name": "RST/EN", "type": "input",- "description": "Enables or shuts down the output side when high or low, and resets the DESAT fault on FLT if held low for more than 1000 ns; tie to IN+ for automatic reset."+ "description": "Enables or shuts down the output side (FET turned off by a regular turn-off when low) and resets a DESAT fault signaled on FLT when held low for more than 1000 ns; tie to IN+ for automatic reset." }, { "number": "15", "name": "VCC", "type": "power_in",- "description": "Input power supply from 3 V to 5.5 V, bypassed with a >1-µF capacitor to GND placed close to the pin."+ "description": "Input-side power supply from 3 V to 5.5 V, to be bypassed with a >1 µF capacitor to GND placed close to the pin." }, { "number": "16", "name": "APWM", "type": "output",- "description": "Isolated analog sensing PWM output, left floating if unused."+ "description": "Isolated analog sensing PWM output; leave floating if unused." } ], "provenance": {@@ -150,17 +150,17 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The pin diagram text on pages 1 and 3 is garbled by extraction, so pin numbers were taken from Table; The datasheet table gives I/O letters only. RDY and FLT are open-drain outputs and were typed as out"+ "extractor flagged: The page-3 pin figure text is scrambled in extraction, so pin positions were taken from Table 4-1 (P" ], "pages_sent": 8,- "cost_usd": 0.096,- "at": "2026-11-12T04:59:02"+ "cost_usd": 0.0515,+ "at": "2026-11-12T07:58:15" }, "datasheet": { "url": "https://www.ti.com/lit/ds/symlink/ucc21755-q1.pdf",@@ -215,7 +215,7 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "46dc2649af41dab76333d3bf6426faf08b16f04f7255bb6870c30c54d670e0bb",+ "sha256": "ea5ad95b7d2e83d65364c85bd389138078d9f2c899aaf88880827625ec38e417", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }@@ -923,5 +923,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Texas Instruments Gate Drive ICs, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
ucc21755qdwrq1-hero.overlay.json+439−434@@ -1,436 +1,441 @@ {- "spec": "adom-hero 1.4",- "mpn": "UCC21755QDWRQ1",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 16,- "span_mm": 11.35,- "dash_mm": 0.2838,- "gap_mm": 0.1703,- "pad_stroke_mm": 0.0681- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 7,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 16,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 0.908,- "orientation_flipped": false,- "contacts_bbox_mm": [- -5.15,- 5.15,- -4.65,- 4.65- ],- "pads_bbox_mm": [- -5.675,- 5.675,- -4.745,- 4.745- ],- "seating_z_mm": -0.0- },- "sources": {- "glb": "ucc21755qdwrq1-etched.glb",- "glb_sha256": "03ee5852bdc7e21c4e1bc8df2dee0bcfd34e33c1aac39ec35f30e0f175379be8",- "footprint": "ucc21755qdwrq1.kicad_mod",- "footprint_sha256": "07aa02ced9fcdc61d7c6bb5ea1b86803731041e9e171db91a991c3daa7817383",- "pins": "page.json component.pins",- "pins_sha256": "f8014db19c27825b7d3c2f854fbf9acfeb40e2bc13339b1f0b56718f79ced111"- },- "generator": "adom-wiki 1.8.22 (component_hero)",- "labels": [- {- "pad": "1",- "text": "AIN",- "x": -5.825,- "y": -4.445,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "2",- "text": "DESAT",- "x": -5.825,- "y": -3.175,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "3",- "text": "COM",- "x": -5.825,- "y": -1.905,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "4",- "text": "OUTH",- "x": -5.825,- "y": -0.635,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "5",- "text": "VDD",- "x": -5.825,- "y": 0.635,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "6",- "text": "OUTL",- "x": -5.825,- "y": 1.905,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "7",- "text": "CLMPI",- "x": -5.825,- "y": 3.175,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "8",- "text": "VEE",- "x": -5.825,- "y": 4.445,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "9",- "text": "GND",- "x": 5.825,- "y": 4.445,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "10",- "text": "IN+",- "x": 5.825,- "y": 3.175,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "11",- "text": "IN-",- "x": 5.825,- "y": 1.905,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "12",- "text": "RDY",- "x": 5.825,- "y": 0.635,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "13",- "text": "FLT",- "x": 5.825,- "y": -0.635,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "14",- "text": "RST/EN",- "x": 5.825,- "y": -1.905,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "15",- "text": "VCC",- "x": 5.825,- "y": -3.175,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "16",- "text": "APWM",- "x": 5.825,- "y": -4.445,- "align": "left",- "vertical": false,- "h": 0.6- }+ "spec": "adom-hero 1.4",+ "mpn": "UCC21755QDWRQ1",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 16,+ "span_mm": 11.35,+ "dash_mm": 0.2838,+ "gap_mm": 0.1703,+ "pad_stroke_mm": 0.0681+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 16,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "board_underside": true,+ "electrical_pads_without_contact": [],+ "mounting_pads_left_out": [],+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.908,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -5.15,+ 5.15,+ -4.65,+ 4.65+ ],+ "pads_bbox_mm": [+ -5.675,+ 5.675,+ -4.745,+ 4.745 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -4.65,- -4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -4.65,- -3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -4.65,- -1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -4.65,- -0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -4.65,- 0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -4.65,- 1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -4.65,- 3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- -4.65,- 4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- 4.65,- 4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- 4.65,- 3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- 4.65,- 1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- 4.65,- 0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- 4.65,- -0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- 4.65,- -1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "15",- "shape": "roundrect",- "center_mm": [- 4.65,- -3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "16",- "shape": "roundrect",- "center_mm": [- 4.65,- -4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- }- ]-}+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "ucc21755qdwrq1-etched.glb",+ "glb_sha256": "03ee5852bdc7e21c4e1bc8df2dee0bcfd34e33c1aac39ec35f30e0f175379be8",+ "footprint": "ucc21755qdwrq1.kicad_mod",+ "footprint_sha256": "07aa02ced9fcdc61d7c6bb5ea1b86803731041e9e171db91a991c3daa7817383",+ "pins": "page.json component.pins",+ "pins_sha256": "f8014db19c27825b7d3c2f854fbf9acfeb40e2bc13339b1f0b56718f79ced111"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "AIN",+ "x": -5.825,+ "y": -4.445,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "DESAT",+ "x": -5.825,+ "y": -3.175,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "COM",+ "x": -5.825,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "OUTH",+ "x": -5.825,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "VDD",+ "x": -5.825,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "OUTL",+ "x": -5.825,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "CLMPI",+ "x": -5.825,+ "y": 3.175,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "VEE",+ "x": -5.825,+ "y": 4.445,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "9",+ "text": "GND",+ "x": 5.825,+ "y": 4.445,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "10",+ "text": "IN+",+ "x": 5.825,+ "y": 3.175,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "11",+ "text": "IN-",+ "x": 5.825,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "12",+ "text": "RDY",+ "x": 5.825,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "13",+ "text": "FLT",+ "x": 5.825,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "14",+ "text": "RST/EN",+ "x": 5.825,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "15",+ "text": "VCC",+ "x": 5.825,+ "y": -3.175,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "16",+ "text": "APWM",+ "x": 5.825,+ "y": -4.445,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}