← Commit history

Publish 0.1.3

Ray ·bc654837fb · ·parent 4ccc0b1
3 files changed +103−99
README.md+48−48
@@ -8,22 +8,22 @@ UCC21755QDWRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | AIN | input | Isolated analog sensing input, with a small capacitor to COM for noise immunity; the analog sensing voltage range is 0.6 V to 4.5 V referenced to COM, and it must be tied to COM if unused. |-| 2 | DESAT | input | Desaturation protection input with a typical 5 V detection threshold referenced to COM, which must be tied to COM if unused to avoid false overcurrent faults. |-| 3 | COM | power_in | Common ground reference for the output side, to be connected to the emitter of an IGBT or the source of a SiC MOSFET. |-| 4 | OUTH | output | Gate driver pull-up output with 10 A peak source current capability. |-| 5 | VDD | power_in | Positive supply rail for gate drive voltage, specified from 13 V to 33 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin. |-| 6 | OUTL | output | Gate driver pull-down output with 10 A peak sink current capability. |-| 7 | CLMPI | input | Internal active Miller clamp connected directly to the power transistor gate, to be left floating or tied to VEE if unused. |-| 8 | VEE | power_in | Negative supply rail for gate drive voltage, specified from -16 V to 0 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin. |+| 1 | AIN | input | Isolated analog sensing input referenced to COM; place a small capacitor to COM for noise immunity, and tie to COM if unused. |+| 2 | DESAT | input | Desaturation current protection input referenced to COM; tie to COM if unused. |+| 3 | COM | power_in | Common ground reference for the output side, connected to the IGBT emitter or SiC MOSFET source. |+| 4 | OUTH | output | Gate driver pull-up output. |+| 5 | VDD | power_in | Positive gate drive supply rail (13 V to 33 V recommended range); bypass with a >10-µF capacitor to COM placed close to the pin. |+| 6 | OUTL | output | Gate driver pull-down output. |+| 7 | CLMPI | input | Internal active Miller clamp connected directly to the power transistor gate; leave floating or tie to VEE if unused. |+| 8 | VEE | power_in | Negative gate drive supply rail (-16 V to 0 V recommended range); bypass with a >10-µF capacitor to COM placed close to the pin. | | 9 | GND | power_in | Input-side power supply and logic ground reference. |-| 10 | IN+ | input | Non-inverting gate driver control input referenced to GND, to be tied to VCC if unused. |-| 11 | IN- | input | Inverting gate driver control input referenced to GND, to be tied to GND if unused. |-| 12 | RDY | output | Open-drain power-good output for VCC-GND and VDD-COM, which can be paralleled with other RDY signals. |-| 13 | FLT | output | Open-drain active-low fault alarm output asserted on overcurrent or short circuit, which can be paralleled with other fault outputs. |-| 14 | RST/EN | input | Enables or shuts down the output side (regular turn-off when low) and resets the DESAT fault on FLT when held low for more than 1000 ns; tie to IN+ for automatic reset. |-| 15 | VCC | power_in | Input-side power supply rated from 3 V to 5.5 V, to be bypassed with a >1 µF capacitor to GND placed close to the pin. |-| 16 | APWM | output | Isolated analog sensing PWM output on the input side, to be left floating if unused. |+| 10 | IN+ | input | Non-inverting gate driver control input with 40 ns deglitch filter; tie to VCC if unused. |+| 11 | IN- | input | Inverting gate driver control input with 40 ns deglitch filter; tie to GND if unused. |+| 12 | RDY | output | Open-drain power-good output for VCC-GND and VDD-COM, which can be paralleled with other RDY pins. |+| 13 | FLT | output | Open-drain active-low fault alarm output asserted on overcurrent or short circuit, which can be paralleled with other fault pins. |+| 14 | RST/EN | input | Enables or shuts down the output side (low turns the FET off) and resets a DESAT fault when held low for more than 1000 ns; tie to IN+ for automatic reset. |+| 15 | VCC | power_in | Input-side power supply from 3 V to 5.5 V; bypass with a >1-µF capacitor to GND placed close to the pin. |+| 16 | APWM | output | Isolated analog-sensing PWM output on the input side; leave floating if unused. |  ## Key specifications @@ -43,63 +43,63 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | VCC supply voltage (VCC - GND) | VCC | -0.3 |  | 6 | V |  | 4 | | VDD supply voltage (VDD - COM) | VDD | -0.3 |  | 36 | V |  | 4 | | VEE supply voltage (VEE - COM) | VEE | -17.5 |  | 0.3 | V |  | 4 |-| IN+, IN-, RST/EN DC voltage |  | -0.3 |  |  | V | DC, referenced to GND; max printed as VCC | 4 |-| IN+, IN-, RST/EN transient voltage |  | -5 |  |  | V | Transient, less than 100 ns; max printed as VCC+5.0 V | 4 |-| DESAT voltage |  | -0.3 |  |  | V | Reference to COM; max printed as VDD+0.3 V | 4 |-| AIN voltage |  | -0.3 |  | 5 | V | Reference to COM | 4 |-| RDY, FLT, APWM voltage |  | -0.3 |  |  | V | DC, referenced to GND; max printed as VCC | 4 |+| VDD - VEE supply voltage | VMAX | -0.3 |  | 36 | V |  | 4 |+| Input pins IN+, IN-, RST/EN DC voltage | IN+, IN-, RST/EN | -0.3 |  |  | V | DC, reference GND; printed max is VCC | 4 |+| Input pins IN+, IN-, RST/EN transient voltage | IN+, IN-, RST/EN | -5 |  |  | V | Transient, less than 100 ns, reference GND; printed max is VCC+5.0 | 4 |+| DESAT pin voltage | DESAT | -0.3 |  |  | V | Reference COM; printed max is VDD+0.3 | 4 |+| AIN pin voltage | AIN | -0.3 |  | 5 | V | Reference to COM | 4 |+| RDY, FLT, APWM pin voltage | RDY, FLT, APWM | -0.3 |  |  | V | Reference GND; printed max is VCC | 4 | | FLT and RDY pin input current | IFLT, IRDY |  |  | 20 | mA |  | 4 | | APWM pin output current | IAPWM |  |  | 20 | mA |  | 4 | | Junction temperature | TJ | -40 |  | 150 | °C |  | 4 | | Storage temperature | Tstg | -65 |  | 150 | °C |  | 4 |-| VCC supply voltage (VCC-GND) | VCC | 3 |  | 5.5 | V |  | 4 |-| VDD supply voltage (VDD-COM) | VDD | 13 |  | 33 | V |  | 4 |-| VEE supply voltage (VEE-COM) | VEE | -16 |  | 0 | V |  | 4 |-| IN+, IN-, RST/EN low level input voltage |  | 0 |  |  | V | Reference to GND; max printed as 0.3xVCC | 4 |-| Minimum RST/EN pulse width to reset fault | tRST/EN | 1000 |  |  | ns |  | 4 |+| VCC supply voltage (VCC - GND) | VCC | 3 |  | 5.5 | V |  | 4 |+| VDD supply voltage (VDD - COM) | VDD | 13 |  | 33 | V |  | 4 |+| VEE supply voltage (VEE - COM) | VEE | -16 |  | 0 | V |  | 4 |+| VDD - VEE supply voltage | VMAX |  |  | 33 | V |  | 4 |+| Low-level input voltage IN+, IN-, RST/EN | VINL | 0 |  |  | V | Reference to GND; printed max is 0.3xVCC | 4 |+| AIN analog sensing input voltage | AIN | 0.6 |  | 4.5 | V | Reference to COM | 4 |+| Minimum pulse width that resets the fault | tRST/EN | 1000 |  |  | ns |  | 4 | | Ambient temperature | TA | -40 |  | 125 | °C |  | 4 |-| VCC UVLO on threshold | VVCC_ON | 2.55 | 2.7 | 2.85 | V | VCC - GND | 7 |-| VCC UVLO off threshold | VVCC_OFF | 2.35 | 2.5 | 2.65 | V | VCC - GND | 7 |+| Junction temperature | TJ | -40 |  | 150 | °C |  | 4 |+| VCC UVLO ON threshold (VCC - GND) | VVCC_ON | 2.55 | 2.7 | 2.85 | V |  | 7 |+| VCC UVLO OFF threshold (VCC - GND) | VVCC_OFF | 2.35 | 2.5 | 2.65 | V |  | 7 | | VCC UVLO on delay to output high | tVCC+ to OUT | 28 | 37.8 | 50 | µs | IN+ = VCC, IN- = GND | 7 | | VCC UVLO off delay to output low | tVCC- to OUT | 5 | 10 | 15 | µs |  | 7 | | VCC UVLO on delay to RDY high | tVCC+ to RDY | 30 | 37.8 | 50 | µs | RST/EN = VCC | 7 | | VCC UVLO off delay to RDY low | tVCC- to RDY | 5 | 10 | 15 | µs |  | 7 |-| VDD UVLO on threshold | VVDD_ON | 10.5 | 12 | 12.8 | V | VDD - COM | 7 |-| VDD UVLO off threshold | VVDD_OFF | 9.9 | 10.7 | 11.8 | V | VDD - COM | 7 |+| VDD UVLO ON threshold (VDD - COM) | VVDD_ON | 10.5 | 12 | 12.8 | V |  | 7 |+| VDD UVLO OFF threshold (VDD - COM) | VVDD_OFF | 9.9 | 10.7 | 11.8 | V |  | 7 | | VDD UVLO on delay to output high | tVDD+ to OUT | 2 | 5 | 8 | µs | IN+ = VCC, IN- = GND | 7 |-| VDD UVLO off delay to output low | tVDD- to OUT | 5 |  | 10 | µs |  | 7 |-| VDD UVLO on delay to RDY high | tVDD+ to RDY | 10 |  | 15 | µs | RST/EN = VCC | 7 |-| VDD UVLO off delay to RDY low | tVDD- to RDY | 10 |  | 15 | µs |  | 7 | | VCC quiescent current, output high | IVCCQ | 2.5 | 3 | 4 | mA | OUT(H) = High, fS = 0Hz, AIN=2V | 7 | | VCC quiescent current, output low | IVCCQ | 1.45 | 2 | 2.75 | mA | OUT(L) = Low, fS = 0Hz, AIN=2V | 7 | | VDD quiescent current, output high | IVDDQ | 3.6 | 4 | 5.9 | mA | OUT(H) = High, fS = 0Hz, AIN=2V | 7 | | VDD quiescent current, output low | IVDDQ | 3.1 | 3.7 | 5.3 | mA | OUT(L) = Low, fS = 0Hz, AIN=2V | 7 |-| Input high threshold (IN+, IN-, RST/EN) | VINH | 1.85 |  | 2.31 | V | VCC=3.3V | 7 |-| Input low threshold (IN+, IN-, RST/EN) | VINL | 0.99 |  | 1.52 | V |  | 7 |-| IN+, IN-, RST/EN deglitch filter time (ON and OFF) | TINFIL | 28 | 40 | 60 | ns | fS = 50kHz | 7 |+| IN+, IN- and RST/EN deglitch filter time (ON and OFF) | TINFIL | 28 | 40 | 60 | ns | fS = 50kHz | 7 | | Deglitch filter time to reset FLT | TRSTFIL | 500 | 650 | 800 | ns |  | 7 |-| Output active pulldown voltage on OUTL | VOUTPD | 1.5 | 2 | 2.5 | V | IOUTL(typ) = 0.1×IOUTL(typ), VDD=OPEN, VEE=COM | 7 |+| Output active pull down on OUTL | VOUTPD | 1.5 | 2 | 2.5 | V | IOUTL(typ) = 0.1×IOUTL(typ), VDD=OPEN, VEE=COM | 7 | | Miller clamp threshold voltage | VCLMPTH | 1.5 | 2 | 2.5 | V | Reference to VEE | 8 |-| Miller clamp ON delay time | tDCLMPI | 15 |  | 50 | ns | CL = 1.8nF | 8 |-| Blanking capacitor charge current | ICHG | 430 | 500 | 570 | µA | VDESAT = 2.0V | 8 |-| Blanking capacitor discharge current | IDCHG | 10 |  | 15 | mA | VDESAT = 6.0V | 8 |+| DESAT blanking capacitor charge current | ICHG | 430 | 500 | 570 | µA | VDESAT = 2.0V | 8 | | DESAT detection threshold | VDESAT | 4.6 | 5 | 5.47 | V |  | 8 |-| Leading edge blank time | tDESATLEB | 150 | 200 | 450 | ns |  | 8 |+| DESAT leading edge blank time | tDESATLEB | 150 | 200 | 450 | ns |  | 8 | | DESAT deglitch filter | tDESATFIL | 50 | 140 | 230 | ns |  | 8 |-| DESAT propagation delay to OUTL 90% | tDESATOFF | 150 | 200 | 300 | ns | DESAT propagation delay to OUTL 90% | 8 |-| DESAT sense to FLT low delay | tDESATFLT | 400 | 580 | 750 | ns |  | 8 |+| DESAT propagation delay to OUTL 90% | tDESATOFF | 150 | 200 | 300 | ns |  | 8 |+| DESAT to FLT low delay | tDESATFLT | 400 | 580 | 750 | ns |  | 8 | | Soft turn-off current on fault condition | ISTO | 250 | 400 | 570 | mA | VDD-VEE = 20 V, OUTL = 8 V | 8 |-| Analog sensing voltage range | VAIN | 0.6 |  | 4.5 | V |  | 8 | | Internal current source | IAIN | 196 | 203 | 209 | µA | VAIN=2.5V, -40°C< TJ< 150°C | 8 | | APWM output frequency | fAPWM | 380 | 400 | 420 | kHz | VAIN=2.5V | 8 | | APWM duty cycle | DAPWM | 86.5 | 88 | 89.5 | % | VAIN=0.6V | 8 | | APWM duty cycle | DAPWM | 48.5 | 50 | 51.5 | % | VAIN=2.5V | 8 | | APWM duty cycle | DAPWM | 7.5 | 10 | 11.5 | % | VAIN=4.5V | 8 |-| VDD UVLO RDY low minimum holding time | tRDYHLD | 0.55 |  | 1 | ms |  | 8 |-| Output mute time on fault | tFLTMUTE | 0.55 |  | 1 | ms | Reset fault through RST/EN | 8 |-| Propagation delay time low-to-high | tPDLH | 60 | 90 | 130 | ns | CL = 100pF | 9 |-| Propagation delay time high-to-low | tPDHL | 60 | 90 | 130 | ns | CL = 100pF | 9 |+| Propagation delay time low-to-high | tPDLH | 60 | 90 | 130 | ns |  | 9 |+| Propagation delay time high-to-low (printed as low-to-high) | tPDHL | 60 | 90 | 130 | ns |  | 9 |+| Pulse width distortion (tPDHL-tPDLH) | PWD |  |  | 30 | ns |  | 9 |+| Part to part skew | tsk-pp |  |  | 30 | ns | Rising or falling propagation delay | 9 | | Junction-to-ambient thermal resistance | RθJA |  | 68.3 |  | °C/W |  | 5 |+| Junction-to-case (top) thermal resistance | RθJC(top) |  | 27.5 |  | °C/W |  | 5 |+| Junction-to-board thermal resistance | RθJB |  | 32.9 |  | °C/W |  | 5 |+| Junction-to-top characterization parameter | ΨJT |  | 14.1 |  | °C/W |  | 5 |+| Junction-to-board characterization parameter | ΨJB |  | 32.3 |  | °C/W |  | 5 |  ## CAD (KiCad official) @@ -112,7 +112,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc21755-q1.pdf) (53 pp, sha256 `59845406f83fad22`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc21755-q1.pdf) (53 pp, sha256 `59845406f83fad22`, retrieved 2026-11-17) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+26−25
@@ -1,6 +1,6 @@ {   "slug": "ucc21755qdwrq1",-  "version": "0.1.2",+  "version": "0.1.3",   "type": "component",   "description": "Texas Instruments Gate Drive ICs, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "595-UCC21755QDWRQ1"     },     "distributor_check": {-      "checked_at": "2026-11-13T01:49:33Z",+      "checked_at": "2026-11-17T23:02:09Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-UCC21755QDWRQ1TR-ND",@@ -69,49 +69,49 @@         "number": "1",         "name": "AIN",         "type": "input",-        "description": "Isolated analog sensing input, with a small capacitor to COM for noise immunity; the analog sensing voltage range is 0.6 V to 4.5 V referenced to COM, and it must be tied to COM if unused."+        "description": "Isolated analog sensing input referenced to COM; place a small capacitor to COM for noise immunity, and tie to COM if unused."       },       {         "number": "2",         "name": "DESAT",         "type": "input",-        "description": "Desaturation protection input with a typical 5 V detection threshold referenced to COM, which must be tied to COM if unused to avoid false overcurrent faults."+        "description": "Desaturation current protection input referenced to COM; tie to COM if unused."       },       {         "number": "3",         "name": "COM",         "type": "power_in",-        "description": "Common ground reference for the output side, to be connected to the emitter of an IGBT or the source of a SiC MOSFET."+        "description": "Common ground reference for the output side, connected to the IGBT emitter or SiC MOSFET source."       },       {         "number": "4",         "name": "OUTH",         "type": "output",-        "description": "Gate driver pull-up output with 10 A peak source current capability."+        "description": "Gate driver pull-up output."       },       {         "number": "5",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply rail for gate drive voltage, specified from 13 V to 33 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin."+        "description": "Positive gate drive supply rail (13 V to 33 V recommended range); bypass with a >10-µF capacitor to COM placed close to the pin."       },       {         "number": "6",         "name": "OUTL",         "type": "output",-        "description": "Gate driver pull-down output with 10 A peak sink current capability."+        "description": "Gate driver pull-down output."       },       {         "number": "7",         "name": "CLMPI",         "type": "input",-        "description": "Internal active Miller clamp connected directly to the power transistor gate, to be left floating or tied to VEE if unused."+        "description": "Internal active Miller clamp connected directly to the power transistor gate; leave floating or tie to VEE if unused."       },       {         "number": "8",         "name": "VEE",         "type": "power_in",-        "description": "Negative supply rail for gate drive voltage, specified from -16 V to 0 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin."+        "description": "Negative gate drive supply rail (-16 V to 0 V recommended range); bypass with a >10-µF capacitor to COM placed close to the pin."       },       {         "number": "9",@@ -123,43 +123,43 @@         "number": "10",         "name": "IN+",         "type": "input",-        "description": "Non-inverting gate driver control input referenced to GND, to be tied to VCC if unused."+        "description": "Non-inverting gate driver control input with 40 ns deglitch filter; tie to VCC if unused."       },       {         "number": "11",         "name": "IN-",         "type": "input",-        "description": "Inverting gate driver control input referenced to GND, to be tied to GND if unused."+        "description": "Inverting gate driver control input with 40 ns deglitch filter; tie to GND if unused."       },       {         "number": "12",         "name": "RDY",         "type": "output",-        "description": "Open-drain power-good output for VCC-GND and VDD-COM, which can be paralleled with other RDY signals."+        "description": "Open-drain power-good output for VCC-GND and VDD-COM, which can be paralleled with other RDY pins."       },       {         "number": "13",         "name": "FLT",         "type": "output",-        "description": "Open-drain active-low fault alarm output asserted on overcurrent or short circuit, which can be paralleled with other fault outputs."+        "description": "Open-drain active-low fault alarm output asserted on overcurrent or short circuit, which can be paralleled with other fault pins."       },       {         "number": "14",         "name": "RST/EN",         "type": "input",-        "description": "Enables or shuts down the output side (regular turn-off when low) and resets the DESAT fault on FLT when held low for more than 1000 ns; tie to IN+ for automatic reset."+        "description": "Enables or shuts down the output side (low turns the FET off) and resets a DESAT fault when held low for more than 1000 ns; tie to IN+ for automatic reset."       },       {         "number": "15",         "name": "VCC",         "type": "power_in",-        "description": "Input-side power supply rated from 3 V to 5.5 V, to be bypassed with a >1 µF capacitor to GND placed close to the pin."+        "description": "Input-side power supply from 3 V to 5.5 V; bypass with a >1-µF capacitor to GND placed close to the pin."       },       {         "number": "16",         "name": "APWM",         "type": "output",-        "description": "Isolated analog sensing PWM output on the input side, to be left floating if unused."+        "description": "Isolated analog-sensing PWM output on the input side; leave floating if unused."       }     ],     "provenance": {@@ -173,17 +173,18 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pinout taken from the Table 4-1 Pin Functions (page 3); it matches the SOIC-16 DW package hint and t; COM, VDD and VEE are supply/reference pins typed as power_in per the KiCad rule for supply-class pin; The datasheet prints the pin name as IN– (en dash); it is written here as IN- for KiCad compatibilit"+          "extractor flagged: Supply and reference pins are typed power_in per the KiCad convention for power pins; the datasheet ; CLMPI is listed as an I (input) in Table 4-1 even though it is wired directly to the power transisto"         ],         "pages_sent": 53,-        "cost_usd": 0.2002,-        "at": "2026-11-13T01:49:19"+        "cost_usd": 0.1991,+        "at": "2026-11-17T23:01:28"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/ucc21755-q1.pdf",         "pages": 53,         "sha256": "59845406f83fad22",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "citation": "Texas Instruments datasheet"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -214,7 +215,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -232,13 +233,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "619cc8a3d1da5b91ae7d18196a381b4c67f2ae794d87aacce57e5f1e3924816e",-        "checked": "2026-11-13",+        "sha256": "786f730e0906ed569b71b84087d51942e6230e0d71028e990a4b0d3683057e81",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DW0016B",+      "package_code": "DW (SOIC-16, DW0016B)",       "source_page": 50,       "D": {         "nom_mm": 10.3,
page.json+29−26
@@ -4,7 +4,7 @@   "slug": "ucc21755qdwrq1",   "title": "UCC21755QDWRQ1",   "brief": "Texas Instruments Gate Drive ICs, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.2",+  "version": "0.1.3",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "595-UCC21755QDWRQ1"     },     "distributor_check": {-      "checked_at": "2026-11-13T01:49:33Z",+      "checked_at": "2026-11-17T23:02:09Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-UCC21755QDWRQ1TR-ND",@@ -52,49 +52,49 @@         "number": "1",         "name": "AIN",         "type": "input",-        "description": "Isolated analog sensing input, with a small capacitor to COM for noise immunity; the analog sensing voltage range is 0.6 V to 4.5 V referenced to COM, and it must be tied to COM if unused."+        "description": "Isolated analog sensing input referenced to COM; place a small capacitor to COM for noise immunity, and tie to COM if unused."       },       {         "number": "2",         "name": "DESAT",         "type": "input",-        "description": "Desaturation protection input with a typical 5 V detection threshold referenced to COM, which must be tied to COM if unused to avoid false overcurrent faults."+        "description": "Desaturation current protection input referenced to COM; tie to COM if unused."       },       {         "number": "3",         "name": "COM",         "type": "power_in",-        "description": "Common ground reference for the output side, to be connected to the emitter of an IGBT or the source of a SiC MOSFET."+        "description": "Common ground reference for the output side, connected to the IGBT emitter or SiC MOSFET source."       },       {         "number": "4",         "name": "OUTH",         "type": "output",-        "description": "Gate driver pull-up output with 10 A peak source current capability."+        "description": "Gate driver pull-up output."       },       {         "number": "5",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply rail for gate drive voltage, specified from 13 V to 33 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin."+        "description": "Positive gate drive supply rail (13 V to 33 V recommended range); bypass with a >10-µF capacitor to COM placed close to the pin."       },       {         "number": "6",         "name": "OUTL",         "type": "output",-        "description": "Gate driver pull-down output with 10 A peak sink current capability."+        "description": "Gate driver pull-down output."       },       {         "number": "7",         "name": "CLMPI",         "type": "input",-        "description": "Internal active Miller clamp connected directly to the power transistor gate, to be left floating or tied to VEE if unused."+        "description": "Internal active Miller clamp connected directly to the power transistor gate; leave floating or tie to VEE if unused."       },       {         "number": "8",         "name": "VEE",         "type": "power_in",-        "description": "Negative supply rail for gate drive voltage, specified from -16 V to 0 V referenced to COM, to be bypassed with a >10 µF capacitor to COM placed close to the pin."+        "description": "Negative gate drive supply rail (-16 V to 0 V recommended range); bypass with a >10-µF capacitor to COM placed close to the pin."       },       {         "number": "9",@@ -106,43 +106,43 @@         "number": "10",         "name": "IN+",         "type": "input",-        "description": "Non-inverting gate driver control input referenced to GND, to be tied to VCC if unused."+        "description": "Non-inverting gate driver control input with 40 ns deglitch filter; tie to VCC if unused."       },       {         "number": "11",         "name": "IN-",         "type": "input",-        "description": "Inverting gate driver control input referenced to GND, to be tied to GND if unused."+        "description": "Inverting gate driver control input with 40 ns deglitch filter; tie to GND if unused."       },       {         "number": "12",         "name": "RDY",         "type": "output",-        "description": "Open-drain power-good output for VCC-GND and VDD-COM, which can be paralleled with other RDY signals."+        "description": "Open-drain power-good output for VCC-GND and VDD-COM, which can be paralleled with other RDY pins."       },       {         "number": "13",         "name": "FLT",         "type": "output",-        "description": "Open-drain active-low fault alarm output asserted on overcurrent or short circuit, which can be paralleled with other fault outputs."+        "description": "Open-drain active-low fault alarm output asserted on overcurrent or short circuit, which can be paralleled with other fault pins."       },       {         "number": "14",         "name": "RST/EN",         "type": "input",-        "description": "Enables or shuts down the output side (regular turn-off when low) and resets the DESAT fault on FLT when held low for more than 1000 ns; tie to IN+ for automatic reset."+        "description": "Enables or shuts down the output side (low turns the FET off) and resets a DESAT fault when held low for more than 1000 ns; tie to IN+ for automatic reset."       },       {         "number": "15",         "name": "VCC",         "type": "power_in",-        "description": "Input-side power supply rated from 3 V to 5.5 V, to be bypassed with a >1 µF capacitor to GND placed close to the pin."+        "description": "Input-side power supply from 3 V to 5.5 V; bypass with a >1-µF capacitor to GND placed close to the pin."       },       {         "number": "16",         "name": "APWM",         "type": "output",-        "description": "Isolated analog sensing PWM output on the input side, to be left floating if unused."+        "description": "Isolated analog-sensing PWM output on the input side; leave floating if unused."       }     ],     "provenance": {@@ -156,17 +156,18 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pinout taken from the Table 4-1 Pin Functions (page 3); it matches the SOIC-16 DW package hint and t; COM, VDD and VEE are supply/reference pins typed as power_in per the KiCad rule for supply-class pin; The datasheet prints the pin name as IN– (en dash); it is written here as IN- for KiCad compatibilit"+          "extractor flagged: Supply and reference pins are typed power_in per the KiCad convention for power pins; the datasheet ; CLMPI is listed as an I (input) in Table 4-1 even though it is wired directly to the power transisto"         ],         "pages_sent": 53,-        "cost_usd": 0.2002,-        "at": "2026-11-13T01:49:19"+        "cost_usd": 0.1991,+        "at": "2026-11-17T23:01:28"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/ucc21755-q1.pdf",         "pages": 53,         "sha256": "59845406f83fad22",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "citation": "Texas Instruments datasheet"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -197,7 +198,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -215,13 +216,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "619cc8a3d1da5b91ae7d18196a381b4c67f2ae794d87aacce57e5f1e3924816e",-        "checked": "2026-11-13",+        "sha256": "786f730e0906ed569b71b84087d51942e6230e0d71028e990a4b0d3683057e81",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DW0016B",+      "package_code": "DW (SOIC-16, DW0016B)",       "source_page": 50,       "D": {         "nom_mm": 10.3,@@ -1042,5 +1043,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Texas Instruments Gate Drive ICs, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file