← Commit history

Initial commit: component/uc3846n

Ray ·1f559540e5 ·
2 files changed +243
README.mdadded+52
@@ -0,0 +1,52 @@+# UC3846N++**Texas Instruments** · DC-DC Converters · DIP-16++UC3846N from Texas Instruments, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C/S SS | input | Soft-start and current-limit programming input; sink current maximum 50 mA |+| 2 | VREF | power_in | 5.1-V band-gap reference output, ±1% accuracy; load regulation 3-15 mV for IL=1-10 mA |+| 3 | C/S, | input | Current-sense inverting input; common-mode range 0 to VIN-3 V |+| 4 | C/S + | input | Current-sense non-inverting input; common-mode range 0 to VIN-3 V |+| 5 | E/A + | input | Error-amplifier non-inverting input; common-mode range 0 to VIN-2 V |+| 6 | E/A, | input | Error-amplifier inverting input; common-mode range 0 to VIN-2 V |+| 7 | COMP | bidirectional | Error-amplifier output and PWM comparator input; output voltage 0.7-1 V low, 4.3-4.6 V high |+| 8 | CT | input | Oscillator timing capacitor pin for frequency programming per fT = 2.2/(RT·CT) kHz |+| 9 | RT | input | Oscillator timing resistor pin for frequency programming; oscillator current maximum 5 mA |+| 10 | Sync | bidirectional | Synchronization output from master or input to slave controller; output levels 3.9-4.35 V high, 2.3-2.5 V low |+| 11 | A Out | output | PWM driver output A; 500-mA peak source and sink; complementary with B Out |+| 12 | GND | power_in | Signal ground reference; all signals referenced to this node |+| 13 | VC | power_in | Output-stage bias supply input; maximum voltage 40 V |+| 14 | B Out | output | PWM driver output B; 500-mA peak source and sink; complementary with A Out |+| 15 | VIN | power_in | Logic and output-stage supply input; operating range 8-40 V; maximum 40 V |+| 16 | Shutdown | input | External shutdown signal input; threshold 250-400 mV (nominal 350 mV); input range 0 to VIN |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | DIP-16 |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `UC3846N`+- Footprint: `Package_DIP:DIP-16_W7.62mm`+- 3D model: DIP-16 (KiCad packages3D, STEP)+- 3D model files: `uc3846n-etched.step` / `uc3846n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `uc3846n.step` / `uc3846n.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/uc3846) (24 pp, sha256 `0d1e2750f80a16be`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/uc3846n-datasheet.pdf)
page.jsonadded+191
@@ -0,0 +1,191 @@+{+  "slug": "uc3846n",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, DIP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "uc3846n",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "uc3846n.kicad_sym",+    "uc3846n.kicad_mod",+    "uc3846n.glb",+    "uc3846n.step",+    "uc3846n.lbr",+    "docs/hero.png",+    "docs/uc3846n-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UC3846N",+    "manufacturer": "Texas Instruments",+    "package": "DIP-16",+    "pin_count": 16,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/uc3846",+    "parts": {+      "symbol": "uc3846n.kicad_sym",+      "footprint": "uc3846n.kicad_mod",+      "model_3d": "uc3846n-etched.glb",+      "model_3d_plain": "uc3846n.glb",+      "model_3d_step": "uc3846n-etched.step",+      "model_3d_step_plain": "uc3846n.step",+      "lbr": "uc3846n.lbr"+    },+    "distributor_links": {+      "lcsc": "C111775"+    },+    "pins": [+      {+        "number": "1",+        "name": "C/S SS",+        "type": "input",+        "description": "Soft-start and current-limit programming input; sink current maximum 50 mA"+      },+      {+        "number": "2",+        "name": "VREF",+        "type": "power_in",+        "description": "5.1-V band-gap reference output, ±1% accuracy; load regulation 3-15 mV for IL=1-10 mA"+      },+      {+        "number": "3",+        "name": "C/S –",+        "type": "input",+        "description": "Current-sense inverting input; common-mode range 0 to VIN-3 V"+      },+      {+        "number": "4",+        "name": "C/S +",+        "type": "input",+        "description": "Current-sense non-inverting input; common-mode range 0 to VIN-3 V"+      },+      {+        "number": "5",+        "name": "E/A +",+        "type": "input",+        "description": "Error-amplifier non-inverting input; common-mode range 0 to VIN-2 V"+      },+      {+        "number": "6",+        "name": "E/A –",+        "type": "input",+        "description": "Error-amplifier inverting input; common-mode range 0 to VIN-2 V"+      },+      {+        "number": "7",+        "name": "COMP",+        "type": "bidirectional",+        "description": "Error-amplifier output and PWM comparator input; output voltage 0.7-1 V low, 4.3-4.6 V high"+      },+      {+        "number": "8",+        "name": "CT",+        "type": "input",+        "description": "Oscillator timing capacitor pin for frequency programming per fT = 2.2/(RT·CT) kHz"+      },+      {+        "number": "9",+        "name": "RT",+        "type": "input",+        "description": "Oscillator timing resistor pin for frequency programming; oscillator current maximum 5 mA"+      },+      {+        "number": "10",+        "name": "Sync",+        "type": "bidirectional",+        "description": "Synchronization output from master or input to slave controller; output levels 3.9-4.35 V high, 2.3-2.5 V low"+      },+      {+        "number": "11",+        "name": "A Out",+        "type": "output",+        "description": "PWM driver output A; 500-mA peak source and sink; complementary with B Out"+      },+      {+        "number": "12",+        "name": "GND",+        "type": "power_in",+        "description": "Signal ground reference; all signals referenced to this node"+      },+      {+        "number": "13",+        "name": "VC",+        "type": "power_in",+        "description": "Output-stage bias supply input; maximum voltage 40 V"+      },+      {+        "number": "14",+        "name": "B Out",+        "type": "output",+        "description": "PWM driver output B; 500-mA peak source and sink; complementary with A Out"+      },+      {+        "number": "15",+        "name": "VIN",+        "type": "power_in",+        "description": "Logic and output-stage supply input; operating range 8-40 V; maximum 40 V"+      },+      {+        "number": "16",+        "name": "Shutdown",+        "type": "input",+        "description": "External shutdown signal input; threshold 250-400 mV (nominal 350 mV); input range 0 to VIN"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 9 name discrepancy: PAGE 3 table lists 'CR' but oscillator description (PAGE 9) and circuit diag; Pins 5 and 6 description inconsistency: PAGE 3 table text contains errors—both listed as 'inverting "+        ],+        "pages_sent": 24,+        "cost_usd": 0.3723,+        "at": "2026-09-23T04:56:37"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/uc3846",+        "pages": 24,+        "sha256": "0d1e2750f80a16be",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file