component
UC2825DWTR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# UC2825DWTR++**Texas Instruments** · DC-DC Converters · SOIC-16-300mil++UC2825DWTR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INV | input | Inverting input of the error amplifier; absolute maximum analog input range -0.3V to 7V. |+| 2 | NI | input | Non-inverting input of the error amplifier; absolute maximum analog input range -0.3V to 7V. |+| 3 | E/A Out | output | Error amplifier output used with external compensation network; output current limited to 5mA max, sink current 1-2.5mA and source current -0.5 to -1.3mA typical. |+| 4 | Clock | bidirectional | Oscillator clock output pin, also used for synchronizing multiple devices; clock output current limited to -5mA max, clock high 3.9-4.5V and low 2.3-2.9V typical. |+| 5 | RT | passive | Oscillator timing pin; external resistor to ground sets the oscillator charging current (rated -5mA max) and, with CT, the switching frequency; analog input range -0.3V to 7V. |+| 6 | CT | passive | Oscillator timing capacitor pin; external capacitor to ground sets switching frequency together with RT, ramp valley 1.0V and peak 2.8V typical; analog input range -0.3V to 6V. |+| 7 | Ramp | input | PWM comparator ramp input for voltage-mode ramp or current-mode current-sense signal; bias current -5µA max; analog input range -0.3V to 7V. |+| 8 | Soft Start | passive | Soft-start and maximum duty-cycle clamp pin; charges with 3-20µA typical current and can sink up to 20mA (discharge 1mA) to reset; analog input range -0.3V to 6V. |+| 9 | ILIM/SD | input | Current-limit/shutdown input; pulse-by-pulse current-limit threshold 1.0V typical and TTL-compatible shutdown threshold 1.40V typical; analog input range -0.3V to 6V. |+| 10 | Gnd | power_in | Signal ground reference for the low-power control circuitry, separate from the power ground return. |+| 11 | Out A | output | Totem-pole output A capable of sourcing/sinking 0.5A DC (2A peak, 0.5µs pulse) to drive a power MOSFET gate; high level 13.0-13.5V typical. |+| 12 | Pwr Gnd | power_in | Power ground return for the output driver stage, kept separate from signal ground to isolate switching noise. |+| 13 | VC | power_in | Supply voltage for the output totem-pole drivers, rated up to 30V absolute maximum; should be locally bypassed. |+| 14 | Out B | output | Totem-pole output B capable of sourcing/sinking 0.5A DC (2A peak, 0.5µs pulse) to drive a power MOSFET gate; high level 13.0-13.5V typical. |+| 15 | VCC | power_in | Main chip supply voltage, rated up to 30V absolute maximum; UVLO start threshold 9.2V typical with 0.8V hysteresis, start-up current 1.1mA typical. |+| 16 | VREF | power_out | 5.1V (5.00-5.20V typical) reference output capable of sourcing at least 10mA with short-circuit current of -15 to -100mA, used to bias external circuitry. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `UC2825DWTR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)+- 3D model files: `uc2825dwtr-etched.step` / `uc2825dwtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `uc2825dwtr.step` / `uc2825dwtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/uc2825) (23 pp, sha256 `62f4a96c2122b13d`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/uc2825dwtr-datasheet.pdf)
page.jsonadded+191@@ -0,0 +1,191 @@+{+ "slug": "uc2825dwtr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "uc2825dwtr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "uc2825dwtr.kicad_sym",+ "uc2825dwtr.kicad_mod",+ "uc2825dwtr.glb",+ "uc2825dwtr.step",+ "uc2825dwtr.lbr",+ "docs/hero.png",+ "docs/uc2825dwtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "UC2825DWTR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-16-300mil",+ "pin_count": 16,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/uc2825",+ "parts": {+ "symbol": "uc2825dwtr.kicad_sym",+ "footprint": "uc2825dwtr.kicad_mod",+ "model_3d": "uc2825dwtr-etched.glb",+ "model_3d_plain": "uc2825dwtr.glb",+ "model_3d_step": "uc2825dwtr-etched.step",+ "model_3d_step_plain": "uc2825dwtr.step",+ "lbr": "uc2825dwtr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2869566"+ },+ "pins": [+ {+ "number": "1",+ "name": "INV",+ "type": "input",+ "description": "Inverting input of the error amplifier; absolute maximum analog input range -0.3V to 7V."+ },+ {+ "number": "2",+ "name": "NI",+ "type": "input",+ "description": "Non-inverting input of the error amplifier; absolute maximum analog input range -0.3V to 7V."+ },+ {+ "number": "3",+ "name": "E/A Out",+ "type": "output",+ "description": "Error amplifier output used with external compensation network; output current limited to 5mA max, sink current 1-2.5mA and source current -0.5 to -1.3mA typical."+ },+ {+ "number": "4",+ "name": "Clock",+ "type": "bidirectional",+ "description": "Oscillator clock output pin, also used for synchronizing multiple devices; clock output current limited to -5mA max, clock high 3.9-4.5V and low 2.3-2.9V typical."+ },+ {+ "number": "5",+ "name": "RT",+ "type": "passive",+ "description": "Oscillator timing pin; external resistor to ground sets the oscillator charging current (rated -5mA max) and, with CT, the switching frequency; analog input range -0.3V to 7V."+ },+ {+ "number": "6",+ "name": "CT",+ "type": "passive",+ "description": "Oscillator timing capacitor pin; external capacitor to ground sets switching frequency together with RT, ramp valley 1.0V and peak 2.8V typical; analog input range -0.3V to 6V."+ },+ {+ "number": "7",+ "name": "Ramp",+ "type": "input",+ "description": "PWM comparator ramp input for voltage-mode ramp or current-mode current-sense signal; bias current -5µA max; analog input range -0.3V to 7V."+ },+ {+ "number": "8",+ "name": "Soft Start",+ "type": "passive",+ "description": "Soft-start and maximum duty-cycle clamp pin; charges with 3-20µA typical current and can sink up to 20mA (discharge 1mA) to reset; analog input range -0.3V to 6V."+ },+ {+ "number": "9",+ "name": "ILIM/SD",+ "type": "input",+ "description": "Current-limit/shutdown input; pulse-by-pulse current-limit threshold 1.0V typical and TTL-compatible shutdown threshold 1.40V typical; analog input range -0.3V to 6V."+ },+ {+ "number": "10",+ "name": "Gnd",+ "type": "power_in",+ "description": "Signal ground reference for the low-power control circuitry, separate from the power ground return."+ },+ {+ "number": "11",+ "name": "Out A",+ "type": "output",+ "description": "Totem-pole output A capable of sourcing/sinking 0.5A DC (2A peak, 0.5µs pulse) to drive a power MOSFET gate; high level 13.0-13.5V typical."+ },+ {+ "number": "12",+ "name": "Pwr Gnd",+ "type": "power_in",+ "description": "Power ground return for the output driver stage, kept separate from signal ground to isolate switching noise."+ },+ {+ "number": "13",+ "name": "VC",+ "type": "power_in",+ "description": "Supply voltage for the output totem-pole drivers, rated up to 30V absolute maximum; should be locally bypassed."+ },+ {+ "number": "14",+ "name": "Out B",+ "type": "output",+ "description": "Totem-pole output B capable of sourcing/sinking 0.5A DC (2A peak, 0.5µs pulse) to drive a power MOSFET gate; high level 13.0-13.5V typical."+ },+ {+ "number": "15",+ "name": "VCC",+ "type": "power_in",+ "description": "Main chip supply voltage, rated up to 30V absolute maximum; UVLO start threshold 9.2V typical with 0.8V hysteresis, start-up current 1.1mA typical."+ },+ {+ "number": "16",+ "name": "VREF",+ "type": "power_out",+ "description": "5.1V (5.00-5.20V typical) reference output capable of sourcing at least 10mA with short-circuit current of -15 to -100mA, used to bias external circuitry."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 15 (Pwr Gnd) labeling ambiguity: The table labels this as 'Pwr Gnd' (Power Ground), but the abso; Pin 10 (Soft Start) functional verification needed: The table lists Pin 10 as 'Soft Start', but elec; Missing explicit VCC pin identification in the 16-pin pinout: Standard PWM controller designs includ"+ ],+ "pages_sent": 23,+ "cost_usd": 0.332,+ "at": "2026-09-23T18:25:54"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/uc2825",+ "pages": 23,+ "sha256": "62f4a96c2122b13d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}