component
UA78L10ACLPR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-92-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
14 files changed
+1599
README.mdadded+40@@ -0,0 +1,40 @@+# UA78L10ACLPR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-92-3++UA78L10ACLPR from Texas Instruments, in a TO-92-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUTPUT | output | Output pin; use the recommended output capacitor of 0.1 µF from the Recommended Operating Conditions table and place it as close to the OUT and GND pins as possible. |+| 2 | COMMON | power_in | Ground (common) pin for the regulator. |+| 3 | INPUT | input | Input pin; use the recommended input capacitor of 0.33 µF from the Recommended Operating Conditions table and place it as close to the IN and GND pins as possible, with input voltage for UA78L10AC limited to 12.5 V to 25 V on the legacy chip. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TO-92-3 |+| Category | Power Management (PMIC) |+| Pins | 3 |++## CAD (KiCad official)++- Symbol: `UA78L10ACLPR`+- Footprint: `Package_TO_SOT_THT:TO-92_Inline`+- 3D model: TO-92-3 (KiCad packages3D, STEP)+- 3D model files: `ua78l10aclpr-etched.step` / `ua78l10aclpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ua78l10aclpr.step` / `ua78l10aclpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ua78l) (47 pp, sha256 `223d628010f1d8e3`, retrieved 2026-10-11, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ua78l10aclpr-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/ua78l10aclpr-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+163@@ -0,0 +1,163 @@+{+ "slug": "ua78l10aclpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-92-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "ua78l10aclpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ua78l10aclpr.kicad_sym",+ "ua78l10aclpr.kicad_mod",+ "ua78l10aclpr.glb",+ "ua78l10aclpr.step",+ "ua78l10aclpr.lbr",+ "docs/hero.png",+ "docs/ua78l10aclpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ua78l10aclpr-hero.glb",+ "ua78l10aclpr-hero.overlay.json"+ ],+ "component": {+ "mpn": "UA78L10ACLPR",+ "manufacturer": "Texas Instruments",+ "package": "TO-92-3",+ "pin_count": 3,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ua78l",+ "parts": {+ "symbol": "ua78l10aclpr.kicad_sym",+ "footprint": "ua78l10aclpr.kicad_mod",+ "model_3d": "ua78l10aclpr-hero.glb",+ "model_3d_plain": "ua78l10aclpr.glb",+ "model_3d_step": "ua78l10aclpr-etched.step",+ "model_3d_step_plain": "ua78l10aclpr.step",+ "lbr": "ua78l10aclpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2863085",+ "digikey": "296-UA78L10ACLPRTR-ND",+ "mouser": "595-UA78L10ACLPR"+ },+ "distributor_check": {+ "checked_at": "2026-10-11T10:59:26Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-UA78L10ACLPRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-UA78L10ACLPR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OUTPUT",+ "type": "output",+ "description": "Output pin; use the recommended output capacitor of 0.1 µF from the Recommended Operating Conditions table and place it as close to the OUT and GND pins as possible."+ },+ {+ "number": "2",+ "name": "COMMON",+ "type": "power_in",+ "description": "Ground (common) pin for the regulator."+ },+ {+ "number": "3",+ "name": "INPUT",+ "type": "input",+ "description": "Input pin; use the recommended input capacitor of 0.33 µF from the Recommended Operating Conditions table and place it as close to the IN and GND pins as possible, with input voltage for UA78L10AC limited to 12.5 V to 25 V on the legacy chip."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin-to-number mapping for the TO-92 package (OUTPUT=1, COMMON=2, INPUT=3) is taken from the Pin ; The package-option addendum (page 31) lists UA78L10ACLPR as TO-92 (LP), 3 pins, 2000-piece large tap; UA78L10AC is a legacy-chip-only device per the datasheet; its 12.5 V to 25 V input range is taken fr"+ ],+ "pages_sent": 12,+ "cost_usd": 0.0897,+ "at": "2026-10-11T10:59:12"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ua78l",+ "pages": 47,+ "sha256": "223d628010f1d8e3",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ua78l10aclpr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",+ "checked": "2026-10-11",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ua78l10aclpr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "2dee9864fbd8f21704ed2e1ee0c0adfbf7bce97b95d86beb256a839de5b9b9f4",+ "checked": "2026-10-11",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+169@@ -0,0 +1,169 @@+{+ "slug": "ua78l10aclpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-92-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "ua78l10aclpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ua78l10aclpr.kicad_sym",+ "ua78l10aclpr.kicad_mod",+ "ua78l10aclpr.glb",+ "ua78l10aclpr.step",+ "ua78l10aclpr.lbr",+ "docs/hero.png",+ "docs/ua78l10aclpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ua78l10aclpr-hero.glb",+ "ua78l10aclpr-hero.overlay.json"+ ],+ "component": {+ "mpn": "UA78L10ACLPR",+ "manufacturer": "Texas Instruments",+ "package": "TO-92-3",+ "pin_count": 3,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ua78l",+ "parts": {+ "symbol": "ua78l10aclpr.kicad_sym",+ "footprint": "ua78l10aclpr.kicad_mod",+ "model_3d": "ua78l10aclpr-hero.glb",+ "model_3d_plain": "ua78l10aclpr.glb",+ "model_3d_step": "ua78l10aclpr-etched.step",+ "model_3d_step_plain": "ua78l10aclpr.step",+ "lbr": "ua78l10aclpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2863085",+ "digikey": "296-UA78L10ACLPRTR-ND",+ "mouser": "595-UA78L10ACLPR"+ },+ "distributor_check": {+ "checked_at": "2026-10-11T10:59:26Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-UA78L10ACLPRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-UA78L10ACLPR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OUTPUT",+ "type": "output",+ "description": "Output pin; use the recommended output capacitor of 0.1 µF from the Recommended Operating Conditions table and place it as close to the OUT and GND pins as possible."+ },+ {+ "number": "2",+ "name": "COMMON",+ "type": "power_in",+ "description": "Ground (common) pin for the regulator."+ },+ {+ "number": "3",+ "name": "INPUT",+ "type": "input",+ "description": "Input pin; use the recommended input capacitor of 0.33 µF from the Recommended Operating Conditions table and place it as close to the IN and GND pins as possible, with input voltage for UA78L10AC limited to 12.5 V to 25 V on the legacy chip."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin-to-number mapping for the TO-92 package (OUTPUT=1, COMMON=2, INPUT=3) is taken from the Pin ; The package-option addendum (page 31) lists UA78L10ACLPR as TO-92 (LP), 3 pins, 2000-piece large tap; UA78L10AC is a legacy-chip-only device per the datasheet; its 12.5 V to 25 V input range is taken fr"+ ],+ "pages_sent": 12,+ "cost_usd": 0.0897,+ "at": "2026-10-11T10:59:12"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ua78l",+ "pages": 47,+ "sha256": "223d628010f1d8e3",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ua78l10aclpr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",+ "checked": "2026-10-11",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ua78l10aclpr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "2dee9864fbd8f21704ed2e1ee0c0adfbf7bce97b95d86beb256a839de5b9b9f4",+ "checked": "2026-10-11",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
ua78l10aclpr-hero.glbadded⋯ 1 unchanged line ⋯
ua78l10aclpr-hero.overlay.jsonadded+155@@ -0,0 +1,155 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "UA78L10ACLPR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 3,+ "span_mm": 3.59,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "added dot (AI)",+ "pad": "1",+ "center_mm": [+ -0.956,+ 0.0+ ],+ "r_mm": 0.231+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 3,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.287,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -0.24,+ 2.78,+ -0.19,+ 0.19+ ],+ "pads_bbox_mm": [+ -0.525,+ 3.065,+ -0.75,+ 0.75+ ],+ "seating_z_mm": -2.5+ },+ "sources": {+ "glb": "ua78l10aclpr.glb",+ "glb_sha256": "9d5a2886293bc662b7454eb4df09b707dd1083a2262eb7b5b82c9d69f7e94388",+ "footprint": "ua78l10aclpr.kicad_mod",+ "footprint_sha256": "19731cf8b8c297aa1405bb1441d8b9e1828eddbe919b0084f9dbfac29c9a36fc",+ "pins": "page.json component.pins",+ "pins_sha256": "460c835a33eb65f7f6d60dedcbc8b086543e5ffa4e05b144dba8b2456ac7c5af"+ },+ "generator": "adom-wiki 1.7.69 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "OUTPUT",+ "x": -1.337,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "COMMON",+ "x": 1.945,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "INPUT",+ "x": 3.215,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.05,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "oval",+ "center_mm": [+ 1.27,+ 0.0+ ],+ "size_mm": [+ 1.05,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "oval",+ "center_mm": [+ 2.54,+ 0.0+ ],+ "size_mm": [+ 1.05,+ 1.5+ ],+ "rot": 0.0+ }+ ]+}
ua78l10aclpr.glbadded⋯ 1 unchanged line ⋯
ua78l10aclpr.kicad_modadded+209@@ -0,0 +1,209 @@+(footprint "TO-92_Inline"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)")+ (tags "to-92 sc-43 sc-43a sot54 PA33 transistor")+ (property "Reference" "REF**"+ (at 1.27 -3.56 0)+ (layer "F.SilkS")+ (uuid "f8d60c07-fcb4-4333-b1c1-8b3d3f312520")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "TO-92_Inline"+ (at 1.27 2.79 0)+ (layer "F.Fab")+ (uuid "46e152dd-3e84-4692-ab08-8f8d182ac1f0")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "13a62c66-6828-4621-95e7-083954b37b6f")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "a81db220-f19f-495f-8fd1-8d52823f6974")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr through_hole)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -0.53 1.85)+ (end 3.07 1.85)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "cf5cf09f-aa3b-4d09-93f0-cd60b4888842")+ )+ (fp_arc+ (start -0.568478 1.838478)+ (mid -1.132087 -0.994977)+ (end 1.27 -2.6)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "99142eee-f758-4736-a8c8-cb8594d72329")+ )+ (fp_arc+ (start 1.27 -2.6)+ (mid 3.672087 -0.994977)+ (end 3.108478 1.838478)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "6883339b-fe76-44dd-867c-5e7513ca94d9")+ )+ (fp_line+ (start -1.46 -2.73)+ (end -1.46 2.01)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "72a79f77-a855-4ceb-b60f-4bb0540506aa")+ )+ (fp_line+ (start -1.46 -2.73)+ (end 4 -2.73)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "dad691fd-038e-4d6a-bbce-b7dcbddfb4a5")+ )+ (fp_line+ (start 4 2.01)+ (end -1.46 2.01)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "05180e66-b002-4a73-b421-69cbe95c21e7")+ )+ (fp_line+ (start 4 2.01)+ (end 4 -2.73)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "986d9fd3-f662-42cd-a6e8-73c40d564b49")+ )+ (fp_line+ (start -0.5 1.75)+ (end 3 1.75)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "5d7416fc-4b8c-4be4-a9fd-ef9b81ac6c9c")+ )+ (fp_arc+ (start -0.483625 1.753625)+ (mid -1.021221 -0.949055)+ (end 1.27 -2.48)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "aa16c43c-65a5-4741-be20-e91b6c83fa25")+ )+ (fp_arc+ (start 1.27 -2.48)+ (mid 3.561221 -0.949055)+ (end 3.023625 1.753625)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "f16cbdf0-79ae-4941-a6bc-5ea567fda1f0")+ )+ (fp_text user "${REFERENCE}"+ (at 1.27 0 0)+ (layer "F.Fab")+ (uuid "77380750-baf8-4990-b61d-2bd2227c89ba")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" thru_hole rect+ (at 0 0)+ (size 1.05 1.5)+ (drill 0.75)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "30d66bfc-1f65-461a-a175-eddb5ee97273")+ )+ (pad "2" thru_hole oval+ (at 1.27 0)+ (size 1.05 1.5)+ (drill 0.75)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "19a641f3-2188-4ac8-845f-9705044a4d32")+ )+ (pad "3" thru_hole oval+ (at 2.54 0)+ (size 1.05 1.5)+ (drill 0.75)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "58a02559-fefd-4819-914f-420454f3bf9f")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_THT.3dshapes/TO-92_Inline.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
ua78l10aclpr.kicad_symadded+25@@ -0,0 +1,25 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "UA78L10ACLPR" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 5.08 0) (effects (font (size 1.27 1.27))))+ (property "Value" "UA78L10ACLPR" (at 0 -7.62 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "UA78L10ACLPR_0_1"+ (rectangle (start -12.70 2.54) (end 12.70 -5.08)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "UA78L10ACLPR_1_1"+ (pin output line (at -17.78 0.00 0) (length 5.08)+ (name "OUTPUT" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "COMMON" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 0.00 180) (length 5.08)+ (name "INPUT" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
ua78l10aclpr.lbradded+147@@ -0,0 +1,147 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TO-92_Inline">+ <description>3 pads, 3.6 x 1.5 mm. TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)</description>+ <pad name="1" x="0.0000" y="-0.0000" drill="0.7500" diameter="1.0500" shape="long" rot="R90"/>+ <pad name="2" x="1.2700" y="-0.0000" drill="0.7500" diameter="1.0500" shape="long" rot="R90"/>+ <pad name="3" x="2.5400" y="-0.0000" drill="0.7500" diameter="1.0500" shape="long" rot="R90"/>+ <wire x1="-0.5300" y1="-1.8500" x2="3.0700" y2="-1.8500" width="0.1200" layer="21"/>+ <wire x1="-0.5000" y1="-1.7500" x2="3.0000" y2="-1.7500" width="0.1000" layer="51"/>+ <wire x1="-0.5685" y1="-1.8385" x2="-0.8918" y2="-1.4445" width="0.1200" layer="21"/>+ <wire x1="-0.8918" y1="-1.4445" x2="-1.1321" y2="-0.9950" width="0.1200" layer="21"/>+ <wire x1="-1.1321" y1="-0.9950" x2="-1.2800" y2="-0.5072" width="0.1200" layer="21"/>+ <wire x1="-1.2800" y1="-0.5072" x2="-1.3300" y2="-0.0000" width="0.1200" layer="21"/>+ <wire x1="-1.3300" y1="-0.0000" x2="-1.2800" y2="0.5072" width="0.1200" layer="21"/>+ <wire x1="-1.2800" y1="0.5072" x2="-1.1321" y2="0.9950" width="0.1200" layer="21"/>+ <wire x1="-1.1321" y1="0.9950" x2="-0.8918" y2="1.4445" width="0.1200" layer="21"/>+ <wire x1="-0.8918" y1="1.4445" x2="-0.5685" y2="1.8385" width="0.1200" layer="21"/>+ <wire x1="-0.5685" y1="1.8385" x2="-0.1745" y2="2.1618" width="0.1200" layer="21"/>+ <wire x1="-0.1745" y1="2.1618" x2="0.2750" y2="2.4021" width="0.1200" layer="21"/>+ <wire x1="0.2750" y1="2.4021" x2="0.7628" y2="2.5500" width="0.1200" layer="21"/>+ <wire x1="0.7628" y1="2.5500" x2="1.2700" y2="2.6000" width="0.1200" layer="21"/>+ <wire x1="1.2700" y1="2.6000" x2="1.7772" y2="2.5500" width="0.1200" layer="21"/>+ <wire x1="1.7772" y1="2.5500" x2="2.2650" y2="2.4021" width="0.1200" layer="21"/>+ <wire x1="2.2650" y1="2.4021" x2="2.7145" y2="2.1618" width="0.1200" layer="21"/>+ <wire x1="2.7145" y1="2.1618" x2="3.1085" y2="1.8385" width="0.1200" layer="21"/>+ <wire x1="3.1085" y1="1.8385" x2="3.4318" y2="1.4445" width="0.1200" layer="21"/>+ <wire x1="3.4318" y1="1.4445" x2="3.6721" y2="0.9950" width="0.1200" layer="21"/>+ <wire x1="3.6721" y1="0.9950" x2="3.8200" y2="0.5072" width="0.1200" layer="21"/>+ <wire x1="3.8200" y1="0.5072" x2="3.8700" y2="-0.0000" width="0.1200" layer="21"/>+ <wire x1="3.8700" y1="-0.0000" x2="3.8200" y2="-0.5072" width="0.1200" layer="21"/>+ <wire x1="3.8200" y1="-0.5072" x2="3.6721" y2="-0.9950" width="0.1200" layer="21"/>+ <wire x1="3.6721" y1="-0.9950" x2="3.4318" y2="-1.4445" width="0.1200" layer="21"/>+ <wire x1="3.4318" y1="-1.4445" x2="3.1085" y2="-1.8385" width="0.1200" layer="21"/>+ <wire x1="-0.4836" y1="-1.7536" x2="-0.7920" y2="-1.3778" width="0.1000" layer="51"/>+ <wire x1="-0.7920" y1="-1.3778" x2="-1.0212" y2="-0.9491" width="0.1000" layer="51"/>+ <wire x1="-1.0212" y1="-0.9491" x2="-1.1623" y2="-0.4838" width="0.1000" layer="51"/>+ <wire x1="-1.1623" y1="-0.4838" x2="-1.2100" y2="-0.0000" width="0.1000" layer="51"/>+ <wire x1="-1.2100" y1="-0.0000" x2="-1.1623" y2="0.4838" width="0.1000" layer="51"/>+ <wire x1="-1.1623" y1="0.4838" x2="-1.0212" y2="0.9491" width="0.1000" layer="51"/>+ <wire x1="-1.0212" y1="0.9491" x2="-0.7920" y2="1.3778" width="0.1000" layer="51"/>+ <wire x1="-0.7920" y1="1.3778" x2="-0.4836" y2="1.7536" width="0.1000" layer="51"/>+ <wire x1="-0.4836" y1="1.7536" x2="-0.1078" y2="2.0620" width="0.1000" layer="51"/>+ <wire x1="-0.1078" y1="2.0620" x2="0.3209" y2="2.2912" width="0.1000" layer="51"/>+ <wire x1="0.3209" y1="2.2912" x2="0.7862" y2="2.4323" width="0.1000" layer="51"/>+ <wire x1="0.7862" y1="2.4323" x2="1.2700" y2="2.4800" width="0.1000" layer="51"/>+ <wire x1="1.2700" y1="2.4800" x2="1.7538" y2="2.4323" width="0.1000" layer="51"/>+ <wire x1="1.7538" y1="2.4323" x2="2.2191" y2="2.2912" width="0.1000" layer="51"/>+ <wire x1="2.2191" y1="2.2912" x2="2.6478" y2="2.0620" width="0.1000" layer="51"/>+ <wire x1="2.6478" y1="2.0620" x2="3.0236" y2="1.7536" width="0.1000" layer="51"/>+ <wire x1="3.0236" y1="1.7536" x2="3.3320" y2="1.3778" width="0.1000" layer="51"/>+ <wire x1="3.3320" y1="1.3778" x2="3.5612" y2="0.9491" width="0.1000" layer="51"/>+ <wire x1="3.5612" y1="0.9491" x2="3.7023" y2="0.4838" width="0.1000" layer="51"/>+ <wire x1="3.7023" y1="0.4838" x2="3.7500" y2="-0.0000" width="0.1000" layer="51"/>+ <wire x1="3.7500" y1="-0.0000" x2="3.7023" y2="-0.4838" width="0.1000" layer="51"/>+ <wire x1="3.7023" y1="-0.4838" x2="3.5612" y2="-0.9491" width="0.1000" layer="51"/>+ <wire x1="3.5612" y1="-0.9491" x2="3.3320" y2="-1.3778" width="0.1000" layer="51"/>+ <wire x1="3.3320" y1="-1.3778" x2="3.0236" y2="-1.7536" width="0.1000" layer="51"/>+ <text x="0" y="1.350" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.450" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="UA78L10ACLPR">+ <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+ <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+ <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="OUTPUT" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="COMMON" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="INPUT" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="UA78L10ACLPR" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="UA78L10ACLPR" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="TO-92_Inline">+ <connects>+ <connect gate="G$1" pin="OUTPUT" pad="1"/>+ <connect gate="G$1" pin="COMMON" pad="2"/>+ <connect gate="G$1" pin="INPUT" pad="3"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
ua78l10aclpr.stepadded+689@@ -0,0 +1,689 @@+ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('FreeCAD Model'),'2;1'); +FILE_NAME( +'D:/KiCAD/packages3D-source/Package_TO_SOT_THT.3dshapes\\ +TO-92_Inline_Narrow.step','2017-11-28T22:16:31',('kicad StepUp'),( + 'ksu MCAD'),'Open CASCADE STEP processor 6.8','FreeCAD','Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft', + 'automotive_design',1997,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('TO-92_Inline_Narrow','TO-92_Inline_Narrow','',(#8)); +#8 = MECHANICAL_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#527); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#57,#81,#193,#203,#234,#258,#282,#299,#330, + #354,#378,#395,#426,#450,#474,#491,#503,#515)); +#17 = ADVANCED_FACE('',(#18),#52,.F.); +#18 = FACE_BOUND('',#19,.F.); +#19 = EDGE_LOOP('',(#20,#30,#38,#46)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-0.745769083998,-1.33,7.3)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(0.E+000,0.E+000,1.)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#24,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(3.285769083998,-1.33,7.3)); +#34 = LINE('',#35,#36); +#35 = CARTESIAN_POINT('',(-0.745769083998,-1.33,7.3)); +#36 = VECTOR('',#37,1.); +#37 = DIRECTION('',(1.,0.E+000,0.E+000)); +#38 = ORIENTED_EDGE('',*,*,#39,.F.); +#39 = EDGE_CURVE('',#40,#32,#42,.T.); +#40 = VERTEX_POINT('',#41); +#41 = CARTESIAN_POINT('',(3.285769083998,-1.33,2.5)); +#42 = LINE('',#43,#44); +#43 = CARTESIAN_POINT('',(3.285769083998,-1.33,2.5)); +#44 = VECTOR('',#45,1.); +#45 = DIRECTION('',(0.E+000,0.E+000,1.)); +#46 = ORIENTED_EDGE('',*,*,#47,.F.); +#47 = EDGE_CURVE('',#22,#40,#48,.T.); +#48 = LINE('',#49,#50); +#49 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#50 = VECTOR('',#51,1.); +#51 = DIRECTION('',(1.,0.E+000,0.E+000)); +#52 = PLANE('',#53); +#53 = AXIS2_PLACEMENT_3D('',#54,#55,#56); +#54 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#55 = DIRECTION('',(0.E+000,1.,0.E+000)); +#56 = DIRECTION('',(1.,0.E+000,0.E+000)); +#57 = ADVANCED_FACE('',(#58),#76,.T.); +#58 = FACE_BOUND('',#59,.F.); +#59 = EDGE_LOOP('',(#60,#61,#68,#69)); +#60 = ORIENTED_EDGE('',*,*,#39,.T.); +#61 = ORIENTED_EDGE('',*,*,#62,.T.); +#62 = EDGE_CURVE('',#32,#24,#63,.T.); +#63 = CIRCLE('',#64,2.415); +#64 = AXIS2_PLACEMENT_3D('',#65,#66,#67); +#65 = CARTESIAN_POINT('',(1.27,0.E+000,7.3)); +#66 = DIRECTION('',(0.E+000,0.E+000,1.)); +#67 = DIRECTION('',(1.,0.E+000,0.E+000)); +#68 = ORIENTED_EDGE('',*,*,#21,.F.); +#69 = ORIENTED_EDGE('',*,*,#70,.F.); +#70 = EDGE_CURVE('',#40,#22,#71,.T.); +#71 = CIRCLE('',#72,2.415); +#72 = AXIS2_PLACEMENT_3D('',#73,#74,#75); +#73 = CARTESIAN_POINT('',(1.27,0.E+000,2.5)); +#74 = DIRECTION('',(0.E+000,0.E+000,1.)); +#75 = DIRECTION('',(1.,0.E+000,0.E+000)); +#76 = CYLINDRICAL_SURFACE('',#77,2.415); +#77 = AXIS2_PLACEMENT_3D('',#78,#79,#80); +#78 = CARTESIAN_POINT('',(1.27,0.E+000,2.5)); +#79 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#80 = DIRECTION('',(1.,0.E+000,0.E+000)); +#81 = ADVANCED_FACE('',(#82,#86,#120,#154),#188,.T.); +#82 = FACE_BOUND('',#83,.T.); +#83 = EDGE_LOOP('',(#84,#85)); +#84 = ORIENTED_EDGE('',*,*,#47,.F.); +#85 = ORIENTED_EDGE('',*,*,#70,.F.); +#86 = FACE_BOUND('',#87,.T.); +#87 = EDGE_LOOP('',(#88,#98,#106,#114)); +#88 = ORIENTED_EDGE('',*,*,#89,.F.); +#89 = EDGE_CURVE('',#90,#92,#94,.T.); +#90 = VERTEX_POINT('',#91); +#91 = CARTESIAN_POINT('',(1.51,-0.19,2.5)); +#92 = VERTEX_POINT('',#93); +#93 = CARTESIAN_POINT('',(1.03,-0.19,2.5)); +#94 = LINE('',#95,#96); +#95 = CARTESIAN_POINT('',(1.51,-0.19,2.5)); +#96 = VECTOR('',#97,1.); +#97 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#98 = ORIENTED_EDGE('',*,*,#99,.F.); +#99 = EDGE_CURVE('',#100,#90,#102,.T.); +#100 = VERTEX_POINT('',#101); +#101 = CARTESIAN_POINT('',(1.51,0.19,2.5)); +#102 = LINE('',#103,#104); +#103 = CARTESIAN_POINT('',(1.51,0.19,2.5)); +#104 = VECTOR('',#105,1.); +#105 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#106 = ORIENTED_EDGE('',*,*,#107,.F.); +#107 = EDGE_CURVE('',#108,#100,#110,.T.); +#108 = VERTEX_POINT('',#109); +#109 = CARTESIAN_POINT('',(1.03,0.19,2.5)); +#110 = LINE('',#111,#112); +#111 = CARTESIAN_POINT('',(1.03,0.19,2.5)); +#112 = VECTOR('',#113,1.); +#113 = DIRECTION('',(1.,0.E+000,0.E+000)); +#114 = ORIENTED_EDGE('',*,*,#115,.F.); +#115 = EDGE_CURVE('',#92,#108,#116,.T.); +#116 = LINE('',#117,#118); +#117 = CARTESIAN_POINT('',(1.03,-0.19,2.5)); +#118 = VECTOR('',#119,1.); +#119 = DIRECTION('',(0.E+000,1.,0.E+000)); +#120 = FACE_BOUND('',#121,.T.); +#121 = EDGE_LOOP('',(#122,#132,#140,#148)); +#122 = ORIENTED_EDGE('',*,*,#123,.F.); +#123 = EDGE_CURVE('',#124,#126,#128,.T.); +#124 = VERTEX_POINT('',#125); +#125 = CARTESIAN_POINT('',(0.24,-0.19,2.5)); +#126 = VERTEX_POINT('',#127); +#127 = CARTESIAN_POINT('',(-0.24,-0.19,2.5)); +#128 = LINE('',#129,#130); +#129 = CARTESIAN_POINT('',(0.24,-0.19,2.5)); +#130 = VECTOR('',#131,1.); +#131 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#132 = ORIENTED_EDGE('',*,*,#133,.F.); +#133 = EDGE_CURVE('',#134,#124,#136,.T.); +#134 = VERTEX_POINT('',#135); +#135 = CARTESIAN_POINT('',(0.24,0.19,2.5)); +#136 = LINE('',#137,#138); +#137 = CARTESIAN_POINT('',(0.24,0.19,2.5)); +#138 = VECTOR('',#139,1.); +#139 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#140 = ORIENTED_EDGE('',*,*,#141,.F.); +#141 = EDGE_CURVE('',#142,#134,#144,.T.); +#142 = VERTEX_POINT('',#143); +#143 = CARTESIAN_POINT('',(-0.24,0.19,2.5)); +#144 = LINE('',#145,#146); +#145 = CARTESIAN_POINT('',(-0.24,0.19,2.5)); +#146 = VECTOR('',#147,1.); +#147 = DIRECTION('',(1.,0.E+000,0.E+000)); +#148 = ORIENTED_EDGE('',*,*,#149,.F.); +#149 = EDGE_CURVE('',#126,#142,#150,.T.); +#150 = LINE('',#151,#152); +#151 = CARTESIAN_POINT('',(-0.24,-0.19,2.5)); +#152 = VECTOR('',#153,1.); +#153 = DIRECTION('',(0.E+000,1.,0.E+000)); +#154 = FACE_BOUND('',#155,.T.); +#155 = EDGE_LOOP('',(#156,#166,#174,#182)); +#156 = ORIENTED_EDGE('',*,*,#157,.F.); +#157 = EDGE_CURVE('',#158,#160,#162,.T.); +#158 = VERTEX_POINT('',#159); +#159 = CARTESIAN_POINT('',(2.78,0.19,2.5)); +#160 = VERTEX_POINT('',#161); +#161 = CARTESIAN_POINT('',(2.78,-0.19,2.5)); +#162 = LINE('',#163,#164); +#163 = CARTESIAN_POINT('',(2.78,0.19,2.5)); +#164 = VECTOR('',#165,1.); +#165 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#166 = ORIENTED_EDGE('',*,*,#167,.F.); +#167 = EDGE_CURVE('',#168,#158,#170,.T.); +#168 = VERTEX_POINT('',#169); +#169 = CARTESIAN_POINT('',(2.3,0.19,2.5)); +#170 = LINE('',#171,#172); +#171 = CARTESIAN_POINT('',(2.3,0.19,2.5)); +#172 = VECTOR('',#173,1.); +#173 = DIRECTION('',(1.,0.E+000,0.E+000)); +#174 = ORIENTED_EDGE('',*,*,#175,.F.); +#175 = EDGE_CURVE('',#176,#168,#178,.T.); +#176 = VERTEX_POINT('',#177); +#177 = CARTESIAN_POINT('',(2.3,-0.19,2.5)); +#178 = LINE('',#179,#180); +#179 = CARTESIAN_POINT('',(2.3,-0.19,2.5)); +#180 = VECTOR('',#181,1.); +#181 = DIRECTION('',(0.E+000,1.,0.E+000)); +#182 = ORIENTED_EDGE('',*,*,#183,.F.); +#183 = EDGE_CURVE('',#160,#176,#184,.T.); +#184 = LINE('',#185,#186); +#185 = CARTESIAN_POINT('',(2.78,-0.19,2.5)); +#186 = VECTOR('',#187,1.); +#187 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#188 = PLANE('',#189); +#189 = AXIS2_PLACEMENT_3D('',#190,#191,#192); +#190 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#191 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#192 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#193 = ADVANCED_FACE('',(#194),#198,.F.); +#194 = FACE_BOUND('',#195,.T.); +#195 = EDGE_LOOP('',(#196,#197)); +#196 = ORIENTED_EDGE('',*,*,#31,.T.); +#197 = ORIENTED_EDGE('',*,*,#62,.T.); +#198 = PLANE('',#199); +#199 = AXIS2_PLACEMENT_3D('',#200,#201,#202); +#200 = CARTESIAN_POINT('',(-0.745769083998,-1.33,7.3)); +#201 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#202 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#203 = ADVANCED_FACE('',(#204),#229,.F.); +#204 = FACE_BOUND('',#205,.F.); +#205 = EDGE_LOOP('',(#206,#214,#222,#228)); +#206 = ORIENTED_EDGE('',*,*,#207,.T.); +#207 = EDGE_CURVE('',#90,#208,#210,.T.); +#208 = VERTEX_POINT('',#209); +#209 = CARTESIAN_POINT('',(1.51,-0.19,-2.5)); +#210 = LINE('',#211,#212); +#211 = CARTESIAN_POINT('',(1.51,-0.19,2.5)); +#212 = VECTOR('',#213,1.); +#213 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#214 = ORIENTED_EDGE('',*,*,#215,.T.); +#215 = EDGE_CURVE('',#208,#216,#218,.T.); +#216 = VERTEX_POINT('',#217); +#217 = CARTESIAN_POINT('',(1.03,-0.19,-2.5)); +#218 = LINE('',#219,#220); +#219 = CARTESIAN_POINT('',(1.51,-0.19,-2.5)); +#220 = VECTOR('',#221,1.); +#221 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#222 = ORIENTED_EDGE('',*,*,#223,.F.); +#223 = EDGE_CURVE('',#92,#216,#224,.T.); +#224 = LINE('',#225,#226); +#225 = CARTESIAN_POINT('',(1.03,-0.19,2.5)); +#226 = VECTOR('',#227,1.); +#227 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#228 = ORIENTED_EDGE('',*,*,#89,.F.); +#229 = PLANE('',#230); +#230 = AXIS2_PLACEMENT_3D('',#231,#232,#233); +#231 = CARTESIAN_POINT('',(1.51,-0.19,2.5)); +#232 = DIRECTION('',(0.E+000,1.,0.E+000)); +#233 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#234 = ADVANCED_FACE('',(#235),#253,.F.); +#235 = FACE_BOUND('',#236,.F.); +#236 = EDGE_LOOP('',(#237,#238,#246,#252)); +#237 = ORIENTED_EDGE('',*,*,#223,.T.); +#238 = ORIENTED_EDGE('',*,*,#239,.T.); +#239 = EDGE_CURVE('',#216,#240,#242,.T.); +#240 = VERTEX_POINT('',#241); +#241 = CARTESIAN_POINT('',(1.03,0.19,-2.5)); +#242 = LINE('',#243,#244); +#243 = CARTESIAN_POINT('',(1.03,-0.19,-2.5)); +#244 = VECTOR('',#245,1.); +#245 = DIRECTION('',(0.E+000,1.,0.E+000)); +#246 = ORIENTED_EDGE('',*,*,#247,.F.); +#247 = EDGE_CURVE('',#108,#240,#248,.T.); +#248 = LINE('',#249,#250); +#249 = CARTESIAN_POINT('',(1.03,0.19,2.5)); +#250 = VECTOR('',#251,1.); +#251 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#252 = ORIENTED_EDGE('',*,*,#115,.F.); +#253 = PLANE('',#254); +#254 = AXIS2_PLACEMENT_3D('',#255,#256,#257); +#255 = CARTESIAN_POINT('',(1.03,-0.19,2.5)); +#256 = DIRECTION('',(1.,0.E+000,0.E+000)); +#257 = DIRECTION('',(0.E+000,1.,0.E+000)); +#258 = ADVANCED_FACE('',(#259),#277,.F.); +#259 = FACE_BOUND('',#260,.F.); +#260 = EDGE_LOOP('',(#261,#262,#270,#276)); +#261 = ORIENTED_EDGE('',*,*,#247,.T.); +#262 = ORIENTED_EDGE('',*,*,#263,.T.); +#263 = EDGE_CURVE('',#240,#264,#266,.T.); +#264 = VERTEX_POINT('',#265); +#265 = CARTESIAN_POINT('',(1.51,0.19,-2.5)); +#266 = LINE('',#267,#268); +#267 = CARTESIAN_POINT('',(1.03,0.19,-2.5)); +#268 = VECTOR('',#269,1.); +#269 = DIRECTION('',(1.,0.E+000,0.E+000)); +#270 = ORIENTED_EDGE('',*,*,#271,.F.); +#271 = EDGE_CURVE('',#100,#264,#272,.T.); +#272 = LINE('',#273,#274); +#273 = CARTESIAN_POINT('',(1.51,0.19,2.5)); +#274 = VECTOR('',#275,1.); +#275 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#276 = ORIENTED_EDGE('',*,*,#107,.F.); +#277 = PLANE('',#278); +#278 = AXIS2_PLACEMENT_3D('',#279,#280,#281); +#279 = CARTESIAN_POINT('',(1.03,0.19,2.5)); +#280 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#281 = DIRECTION('',(1.,0.E+000,0.E+000)); +#282 = ADVANCED_FACE('',(#283),#294,.F.); +#283 = FACE_BOUND('',#284,.F.); +#284 = EDGE_LOOP('',(#285,#286,#292,#293)); +#285 = ORIENTED_EDGE('',*,*,#271,.T.); +#286 = ORIENTED_EDGE('',*,*,#287,.T.); +#287 = EDGE_CURVE('',#264,#208,#288,.T.); +#288 = LINE('',#289,#290); +#289 = CARTESIAN_POINT('',(1.51,0.19,-2.5)); +#290 = VECTOR('',#291,1.); +#291 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#292 = ORIENTED_EDGE('',*,*,#207,.F.); +#293 = ORIENTED_EDGE('',*,*,#99,.F.); +#294 = PLANE('',#295); +#295 = AXIS2_PLACEMENT_3D('',#296,#297,#298); +#296 = CARTESIAN_POINT('',(1.51,0.19,2.5)); +#297 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#298 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#299 = ADVANCED_FACE('',(#300),#325,.F.); +#300 = FACE_BOUND('',#301,.F.); +#301 = EDGE_LOOP('',(#302,#310,#318,#324)); +#302 = ORIENTED_EDGE('',*,*,#303,.T.); +#303 = EDGE_CURVE('',#124,#304,#306,.T.); +#304 = VERTEX_POINT('',#305); +#305 = CARTESIAN_POINT('',(0.24,-0.19,-2.5)); +#306 = LINE('',#307,#308); +#307 = CARTESIAN_POINT('',(0.24,-0.19,2.5)); +#308 = VECTOR('',#309,1.); +#309 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#310 = ORIENTED_EDGE('',*,*,#311,.T.); +#311 = EDGE_CURVE('',#304,#312,#314,.T.); +#312 = VERTEX_POINT('',#313); +#313 = CARTESIAN_POINT('',(-0.24,-0.19,-2.5)); +#314 = LINE('',#315,#316); +#315 = CARTESIAN_POINT('',(0.24,-0.19,-2.5)); +#316 = VECTOR('',#317,1.); +#317 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#318 = ORIENTED_EDGE('',*,*,#319,.F.); +#319 = EDGE_CURVE('',#126,#312,#320,.T.); +#320 = LINE('',#321,#322); +#321 = CARTESIAN_POINT('',(-0.24,-0.19,2.5)); +#322 = VECTOR('',#323,1.); +#323 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#324 = ORIENTED_EDGE('',*,*,#123,.F.); +#325 = PLANE('',#326); +#326 = AXIS2_PLACEMENT_3D('',#327,#328,#329); +#327 = CARTESIAN_POINT('',(0.24,-0.19,2.5)); +#328 = DIRECTION('',(0.E+000,1.,0.E+000)); +#329 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#330 = ADVANCED_FACE('',(#331),#349,.F.); +#331 = FACE_BOUND('',#332,.F.); +#332 = EDGE_LOOP('',(#333,#334,#342,#348)); +#333 = ORIENTED_EDGE('',*,*,#319,.T.); +#334 = ORIENTED_EDGE('',*,*,#335,.T.); +#335 = EDGE_CURVE('',#312,#336,#338,.T.); +#336 = VERTEX_POINT('',#337); +#337 = CARTESIAN_POINT('',(-0.24,0.19,-2.5)); +#338 = LINE('',#339,#340); +#339 = CARTESIAN_POINT('',(-0.24,-0.19,-2.5)); +#340 = VECTOR('',#341,1.); +#341 = DIRECTION('',(0.E+000,1.,0.E+000)); +#342 = ORIENTED_EDGE('',*,*,#343,.F.); +#343 = EDGE_CURVE('',#142,#336,#344,.T.); +#344 = LINE('',#345,#346); +#345 = CARTESIAN_POINT('',(-0.24,0.19,2.5)); +#346 = VECTOR('',#347,1.); +#347 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#348 = ORIENTED_EDGE('',*,*,#149,.F.); +#349 = PLANE('',#350); +#350 = AXIS2_PLACEMENT_3D('',#351,#352,#353); +#351 = CARTESIAN_POINT('',(-0.24,-0.19,2.5)); +#352 = DIRECTION('',(1.,0.E+000,0.E+000)); +#353 = DIRECTION('',(0.E+000,1.,0.E+000)); +#354 = ADVANCED_FACE('',(#355),#373,.F.); +#355 = FACE_BOUND('',#356,.F.); +#356 = EDGE_LOOP('',(#357,#358,#366,#372)); +#357 = ORIENTED_EDGE('',*,*,#343,.T.); +#358 = ORIENTED_EDGE('',*,*,#359,.T.); +#359 = EDGE_CURVE('',#336,#360,#362,.T.); +#360 = VERTEX_POINT('',#361); +#361 = CARTESIAN_POINT('',(0.24,0.19,-2.5)); +#362 = LINE('',#363,#364); +#363 = CARTESIAN_POINT('',(-0.24,0.19,-2.5)); +#364 = VECTOR('',#365,1.); +#365 = DIRECTION('',(1.,0.E+000,0.E+000)); +#366 = ORIENTED_EDGE('',*,*,#367,.F.); +#367 = EDGE_CURVE('',#134,#360,#368,.T.); +#368 = LINE('',#369,#370); +#369 = CARTESIAN_POINT('',(0.24,0.19,2.5)); +#370 = VECTOR('',#371,1.); +#371 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#372 = ORIENTED_EDGE('',*,*,#141,.F.); +#373 = PLANE('',#374); +#374 = AXIS2_PLACEMENT_3D('',#375,#376,#377); +#375 = CARTESIAN_POINT('',(-0.24,0.19,2.5)); +#376 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#377 = DIRECTION('',(1.,0.E+000,0.E+000)); +#378 = ADVANCED_FACE('',(#379),#390,.F.); +#379 = FACE_BOUND('',#380,.F.); +#380 = EDGE_LOOP('',(#381,#382,#388,#389)); +#381 = ORIENTED_EDGE('',*,*,#367,.T.); +#382 = ORIENTED_EDGE('',*,*,#383,.T.); +#383 = EDGE_CURVE('',#360,#304,#384,.T.); +#384 = LINE('',#385,#386); +#385 = CARTESIAN_POINT('',(0.24,0.19,-2.5)); +#386 = VECTOR('',#387,1.); +#387 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#388 = ORIENTED_EDGE('',*,*,#303,.F.); +#389 = ORIENTED_EDGE('',*,*,#133,.F.); +#390 = PLANE('',#391); +#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394); +#392 = CARTESIAN_POINT('',(0.24,0.19,2.5)); +#393 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#394 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#395 = ADVANCED_FACE('',(#396),#421,.F.); +#396 = FACE_BOUND('',#397,.F.); +#397 = EDGE_LOOP('',(#398,#406,#414,#420)); +#398 = ORIENTED_EDGE('',*,*,#399,.T.); +#399 = EDGE_CURVE('',#158,#400,#402,.T.); +#400 = VERTEX_POINT('',#401); +#401 = CARTESIAN_POINT('',(2.78,0.19,-2.5)); +#402 = LINE('',#403,#404); +#403 = CARTESIAN_POINT('',(2.78,0.19,2.5)); +#404 = VECTOR('',#405,1.); +#405 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#406 = ORIENTED_EDGE('',*,*,#407,.T.); +#407 = EDGE_CURVE('',#400,#408,#410,.T.); +#408 = VERTEX_POINT('',#409); +#409 = CARTESIAN_POINT('',(2.78,-0.19,-2.5)); +#410 = LINE('',#411,#412); +#411 = CARTESIAN_POINT('',(2.78,0.19,-2.5)); +#412 = VECTOR('',#413,1.); +#413 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#414 = ORIENTED_EDGE('',*,*,#415,.F.); +#415 = EDGE_CURVE('',#160,#408,#416,.T.); +#416 = LINE('',#417,#418); +#417 = CARTESIAN_POINT('',(2.78,-0.19,2.5)); +#418 = VECTOR('',#419,1.); +#419 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#420 = ORIENTED_EDGE('',*,*,#157,.F.); +#421 = PLANE('',#422); +#422 = AXIS2_PLACEMENT_3D('',#423,#424,#425); +#423 = CARTESIAN_POINT('',(2.78,0.19,2.5)); +#424 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#425 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#426 = ADVANCED_FACE('',(#427),#445,.F.); +#427 = FACE_BOUND('',#428,.F.); +#428 = EDGE_LOOP('',(#429,#430,#438,#444)); +#429 = ORIENTED_EDGE('',*,*,#415,.T.); +#430 = ORIENTED_EDGE('',*,*,#431,.T.); +#431 = EDGE_CURVE('',#408,#432,#434,.T.); +#432 = VERTEX_POINT('',#433); +#433 = CARTESIAN_POINT('',(2.3,-0.19,-2.5)); +#434 = LINE('',#435,#436); +#435 = CARTESIAN_POINT('',(2.78,-0.19,-2.5)); +#436 = VECTOR('',#437,1.); +#437 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#438 = ORIENTED_EDGE('',*,*,#439,.F.); +#439 = EDGE_CURVE('',#176,#432,#440,.T.); +#440 = LINE('',#441,#442); +#441 = CARTESIAN_POINT('',(2.3,-0.19,2.5)); +#442 = VECTOR('',#443,1.); +#443 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#444 = ORIENTED_EDGE('',*,*,#183,.F.); +#445 = PLANE('',#446); +#446 = AXIS2_PLACEMENT_3D('',#447,#448,#449); +#447 = CARTESIAN_POINT('',(2.78,-0.19,2.5)); +#448 = DIRECTION('',(0.E+000,1.,0.E+000)); +#449 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#450 = ADVANCED_FACE('',(#451),#469,.F.); +#451 = FACE_BOUND('',#452,.F.); +#452 = EDGE_LOOP('',(#453,#454,#462,#468)); +#453 = ORIENTED_EDGE('',*,*,#439,.T.); +#454 = ORIENTED_EDGE('',*,*,#455,.T.); +#455 = EDGE_CURVE('',#432,#456,#458,.T.); +#456 = VERTEX_POINT('',#457); +#457 = CARTESIAN_POINT('',(2.3,0.19,-2.5)); +#458 = LINE('',#459,#460); +#459 = CARTESIAN_POINT('',(2.3,-0.19,-2.5)); +#460 = VECTOR('',#461,1.); +#461 = DIRECTION('',(0.E+000,1.,0.E+000)); +#462 = ORIENTED_EDGE('',*,*,#463,.F.); +#463 = EDGE_CURVE('',#168,#456,#464,.T.); +#464 = LINE('',#465,#466); +#465 = CARTESIAN_POINT('',(2.3,0.19,2.5)); +#466 = VECTOR('',#467,1.); +#467 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#468 = ORIENTED_EDGE('',*,*,#175,.F.); +#469 = PLANE('',#470); +#470 = AXIS2_PLACEMENT_3D('',#471,#472,#473); +#471 = CARTESIAN_POINT('',(2.3,-0.19,2.5)); +#472 = DIRECTION('',(1.,0.E+000,0.E+000)); +#473 = DIRECTION('',(0.E+000,1.,0.E+000)); +#474 = ADVANCED_FACE('',(#475),#486,.F.); +#475 = FACE_BOUND('',#476,.F.); +#476 = EDGE_LOOP('',(#477,#478,#484,#485)); +#477 = ORIENTED_EDGE('',*,*,#463,.T.); +#478 = ORIENTED_EDGE('',*,*,#479,.T.); +#479 = EDGE_CURVE('',#456,#400,#480,.T.); +#480 = LINE('',#481,#482); +#481 = CARTESIAN_POINT('',(2.3,0.19,-2.5)); +#482 = VECTOR('',#483,1.); +#483 = DIRECTION('',(1.,0.E+000,0.E+000)); +#484 = ORIENTED_EDGE('',*,*,#399,.F.); +#485 = ORIENTED_EDGE('',*,*,#167,.F.); +#486 = PLANE('',#487); +#487 = AXIS2_PLACEMENT_3D('',#488,#489,#490); +#488 = CARTESIAN_POINT('',(2.3,0.19,2.5)); +#489 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#490 = DIRECTION('',(1.,0.E+000,0.E+000)); +#491 = ADVANCED_FACE('',(#492),#498,.F.); +#492 = FACE_BOUND('',#493,.T.); +#493 = EDGE_LOOP('',(#494,#495,#496,#497)); +#494 = ORIENTED_EDGE('',*,*,#263,.T.); +#495 = ORIENTED_EDGE('',*,*,#287,.T.); +#496 = ORIENTED_EDGE('',*,*,#215,.T.); +#497 = ORIENTED_EDGE('',*,*,#239,.T.); +#498 = PLANE('',#499); +#499 = AXIS2_PLACEMENT_3D('',#500,#501,#502); +#500 = CARTESIAN_POINT('',(1.03,0.19,-2.5)); +#501 = DIRECTION('',(0.E+000,0.E+000,1.)); +#502 = DIRECTION('',(1.,0.E+000,0.E+000)); +#503 = ADVANCED_FACE('',(#504),#510,.F.); +#504 = FACE_BOUND('',#505,.T.); +#505 = EDGE_LOOP('',(#506,#507,#508,#509)); +#506 = ORIENTED_EDGE('',*,*,#359,.T.); +#507 = ORIENTED_EDGE('',*,*,#383,.T.); +#508 = ORIENTED_EDGE('',*,*,#311,.T.); +#509 = ORIENTED_EDGE('',*,*,#335,.T.); +#510 = PLANE('',#511); +#511 = AXIS2_PLACEMENT_3D('',#512,#513,#514); +#512 = CARTESIAN_POINT('',(-0.24,0.19,-2.5)); +#513 = DIRECTION('',(0.E+000,0.E+000,1.)); +#514 = DIRECTION('',(1.,0.E+000,0.E+000)); +#515 = ADVANCED_FACE('',(#516),#522,.F.); +#516 = FACE_BOUND('',#517,.T.); +#517 = EDGE_LOOP('',(#518,#519,#520,#521)); +#518 = ORIENTED_EDGE('',*,*,#479,.T.); +#519 = ORIENTED_EDGE('',*,*,#407,.T.); +#520 = ORIENTED_EDGE('',*,*,#431,.T.); +#521 = ORIENTED_EDGE('',*,*,#455,.T.); +#522 = PLANE('',#523); +#523 = AXIS2_PLACEMENT_3D('',#524,#525,#526); +#524 = CARTESIAN_POINT('',(2.3,0.19,-2.5)); +#525 = DIRECTION('',(0.E+000,0.E+000,1.)); +#526 = DIRECTION('',(1.,0.E+000,0.E+000)); +#527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#531)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#528,#529,#530)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#528 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#529 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#530 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#531 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#528, + 'distance_accuracy_value','confusion accuracy'); +#532 = PRODUCT_TYPE('part',$,(#7)); +#533 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#534, + #542,#549,#556,#563,#571,#578,#585,#592,#599,#606,#613,#620,#627, + #634,#641,#648,#655,#662),#527); +#534 = STYLED_ITEM('color',(#535),#17); +#535 = PRESENTATION_STYLE_ASSIGNMENT((#536)); +#536 = SURFACE_STYLE_USAGE(.BOTH.,#537); +#537 = SURFACE_SIDE_STYLE('',(#538)); +#538 = SURFACE_STYLE_FILL_AREA(#539); +#539 = FILL_AREA_STYLE('',(#540)); +#540 = FILL_AREA_STYLE_COLOUR('',#541); +#541 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#542 = STYLED_ITEM('color',(#543),#57); +#543 = PRESENTATION_STYLE_ASSIGNMENT((#544)); +#544 = SURFACE_STYLE_USAGE(.BOTH.,#545); +#545 = SURFACE_SIDE_STYLE('',(#546)); +#546 = SURFACE_STYLE_FILL_AREA(#547); +#547 = FILL_AREA_STYLE('',(#548)); +#548 = FILL_AREA_STYLE_COLOUR('',#541); +#549 = STYLED_ITEM('color',(#550),#81); +#550 = PRESENTATION_STYLE_ASSIGNMENT((#551)); +#551 = SURFACE_STYLE_USAGE(.BOTH.,#552); +#552 = SURFACE_SIDE_STYLE('',(#553)); +#553 = SURFACE_STYLE_FILL_AREA(#554); +#554 = FILL_AREA_STYLE('',(#555)); +#555 = FILL_AREA_STYLE_COLOUR('',#541); +#556 = STYLED_ITEM('color',(#557),#193); +#557 = PRESENTATION_STYLE_ASSIGNMENT((#558)); +#558 = SURFACE_STYLE_USAGE(.BOTH.,#559); +#559 = SURFACE_SIDE_STYLE('',(#560)); +#560 = SURFACE_STYLE_FILL_AREA(#561); +#561 = FILL_AREA_STYLE('',(#562)); +#562 = FILL_AREA_STYLE_COLOUR('',#541); +#563 = STYLED_ITEM('color',(#564),#203); +#564 = PRESENTATION_STYLE_ASSIGNMENT((#565)); +#565 = SURFACE_STYLE_USAGE(.BOTH.,#566); +#566 = SURFACE_SIDE_STYLE('',(#567)); +#567 = SURFACE_STYLE_FILL_AREA(#568); +#568 = FILL_AREA_STYLE('',(#569)); +#569 = FILL_AREA_STYLE_COLOUR('',#570); +#570 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#571 = STYLED_ITEM('color',(#572),#234); +#572 = PRESENTATION_STYLE_ASSIGNMENT((#573)); +#573 = SURFACE_STYLE_USAGE(.BOTH.,#574); +#574 = SURFACE_SIDE_STYLE('',(#575)); +#575 = SURFACE_STYLE_FILL_AREA(#576); +#576 = FILL_AREA_STYLE('',(#577)); +#577 = FILL_AREA_STYLE_COLOUR('',#570); +#578 = STYLED_ITEM('color',(#579),#258); +#579 = PRESENTATION_STYLE_ASSIGNMENT((#580)); +#580 = SURFACE_STYLE_USAGE(.BOTH.,#581); +#581 = SURFACE_SIDE_STYLE('',(#582)); +#582 = SURFACE_STYLE_FILL_AREA(#583); +#583 = FILL_AREA_STYLE('',(#584)); +#584 = FILL_AREA_STYLE_COLOUR('',#570); +#585 = STYLED_ITEM('color',(#586),#282); +#586 = PRESENTATION_STYLE_ASSIGNMENT((#587)); +#587 = SURFACE_STYLE_USAGE(.BOTH.,#588); +#588 = SURFACE_SIDE_STYLE('',(#589)); +#589 = SURFACE_STYLE_FILL_AREA(#590); +#590 = FILL_AREA_STYLE('',(#591)); +#591 = FILL_AREA_STYLE_COLOUR('',#570); +#592 = STYLED_ITEM('color',(#593),#299); +#593 = PRESENTATION_STYLE_ASSIGNMENT((#594)); +#594 = SURFACE_STYLE_USAGE(.BOTH.,#595); +#595 = SURFACE_SIDE_STYLE('',(#596)); +#596 = SURFACE_STYLE_FILL_AREA(#597); +#597 = FILL_AREA_STYLE('',(#598)); +#598 = FILL_AREA_STYLE_COLOUR('',#570); +#599 = STYLED_ITEM('color',(#600),#330); +#600 = PRESENTATION_STYLE_ASSIGNMENT((#601)); +#601 = SURFACE_STYLE_USAGE(.BOTH.,#602); +#602 = SURFACE_SIDE_STYLE('',(#603)); +#603 = SURFACE_STYLE_FILL_AREA(#604); +#604 = FILL_AREA_STYLE('',(#605)); +#605 = FILL_AREA_STYLE_COLOUR('',#570); +#606 = STYLED_ITEM('color',(#607),#354); +#607 = PRESENTATION_STYLE_ASSIGNMENT((#608)); +#608 = SURFACE_STYLE_USAGE(.BOTH.,#609); +#609 = SURFACE_SIDE_STYLE('',(#610)); +#610 = SURFACE_STYLE_FILL_AREA(#611); +#611 = FILL_AREA_STYLE('',(#612)); +#612 = FILL_AREA_STYLE_COLOUR('',#570); +#613 = STYLED_ITEM('color',(#614),#378); +#614 = PRESENTATION_STYLE_ASSIGNMENT((#615)); +#615 = SURFACE_STYLE_USAGE(.BOTH.,#616); +#616 = SURFACE_SIDE_STYLE('',(#617)); +#617 = SURFACE_STYLE_FILL_AREA(#618); +#618 = FILL_AREA_STYLE('',(#619)); +#619 = FILL_AREA_STYLE_COLOUR('',#570); +#620 = STYLED_ITEM('color',(#621),#395); +#621 = PRESENTATION_STYLE_ASSIGNMENT((#622)); +#622 = SURFACE_STYLE_USAGE(.BOTH.,#623); +#623 = SURFACE_SIDE_STYLE('',(#624)); +#624 = SURFACE_STYLE_FILL_AREA(#625); +#625 = FILL_AREA_STYLE('',(#626)); +#626 = FILL_AREA_STYLE_COLOUR('',#570); +#627 = STYLED_ITEM('color',(#628),#426); +#628 = PRESENTATION_STYLE_ASSIGNMENT((#629)); +#629 = SURFACE_STYLE_USAGE(.BOTH.,#630); +#630 = SURFACE_SIDE_STYLE('',(#631)); +#631 = SURFACE_STYLE_FILL_AREA(#632); +#632 = FILL_AREA_STYLE('',(#633)); +#633 = FILL_AREA_STYLE_COLOUR('',#570); +#634 = STYLED_ITEM('color',(#635),#450); +#635 = PRESENTATION_STYLE_ASSIGNMENT((#636)); +#636 = SURFACE_STYLE_USAGE(.BOTH.,#637); +#637 = SURFACE_SIDE_STYLE('',(#638)); +#638 = SURFACE_STYLE_FILL_AREA(#639); +#639 = FILL_AREA_STYLE('',(#640)); +#640 = FILL_AREA_STYLE_COLOUR('',#570); +#641 = STYLED_ITEM('color',(#642),#474); +#642 = PRESENTATION_STYLE_ASSIGNMENT((#643)); +#643 = SURFACE_STYLE_USAGE(.BOTH.,#644); +#644 = SURFACE_SIDE_STYLE('',(#645)); +#645 = SURFACE_STYLE_FILL_AREA(#646); +#646 = FILL_AREA_STYLE('',(#647)); +#647 = FILL_AREA_STYLE_COLOUR('',#570); +#648 = STYLED_ITEM('color',(#649),#491); +#649 = PRESENTATION_STYLE_ASSIGNMENT((#650)); +#650 = SURFACE_STYLE_USAGE(.BOTH.,#651); +#651 = SURFACE_SIDE_STYLE('',(#652)); +#652 = SURFACE_STYLE_FILL_AREA(#653); +#653 = FILL_AREA_STYLE('',(#654)); +#654 = FILL_AREA_STYLE_COLOUR('',#570); +#655 = STYLED_ITEM('color',(#656),#503); +#656 = PRESENTATION_STYLE_ASSIGNMENT((#657)); +#657 = SURFACE_STYLE_USAGE(.BOTH.,#658); +#658 = SURFACE_SIDE_STYLE('',(#659)); +#659 = SURFACE_STYLE_FILL_AREA(#660); +#660 = FILL_AREA_STYLE('',(#661)); +#661 = FILL_AREA_STYLE_COLOUR('',#570); +#662 = STYLED_ITEM('color',(#663),#515); +#663 = PRESENTATION_STYLE_ASSIGNMENT((#664)); +#664 = SURFACE_STYLE_USAGE(.BOTH.,#665); +#665 = SURFACE_SIDE_STYLE('',(#666)); +#666 = SURFACE_STYLE_FILL_AREA(#667); +#667 = FILL_AREA_STYLE('',(#668)); +#668 = FILL_AREA_STYLE_COLOUR('',#570); +ENDSEC; +END-ISO-10303-21;
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ua78l10aclpr</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ua78l10aclpr</title>