TX4401

@@ -26,19 +26,21 @@       "model_3d_step": "tx4401.step",       "lbr": "tx4401.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C448642"+    },     "pins": [       {         "number": "1",         "name": "RT",         "type": "input",-        "description": "Oscillator frequency programming pin. A resistor from RT to GND sets the internal switching frequency (adjustable 350 kHz to 1.5 MHz). Typical value 60.4 kΩ sets fOSC ≈ 1 MHz per the application circuit."+        "description": "Oscillator frequency programming pin. A resistor from RT to GND sets the internal switching frequency (adjustable 350 kHz to 1.5 MHz). Typical value 60.4 k\u03a9 sets fOSC \u2248 1 MHz per the application circuit."       },       {         "number": "2",         "name": "MODE/SYNC",         "type": "input",-        "description": "Dual-function mode select and external clock synchronisation input. Drive high to enter the 50μA low-power (light-load) mode; can also be driven with an external clock to synchronise the internal oscillator."+        "description": "Dual-function mode select and external clock synchronisation input. Drive high to enter the 50\u03bcA low-power (light-load) mode; can also be driven with an external clock to synchronise the internal oscillator."       },       {         "number": "3",@@ -62,31 +64,31 @@         "number": "6",         "name": "VOUT",         "type": "power_out",-        "description": "Regulated output voltage. Range 2.5V-5.5V (per internal block diagram); connect an output filter capacitor (e.g. 22μF) to GND close to the pin."+        "description": "Regulated output voltage. Range 2.5V-5.5V (per internal block diagram); connect an output filter capacitor (e.g. 22\u03bcF) to GND close to the pin."       },       {         "number": "7",         "name": "VIN",         "type": "power_in",-        "description": "Input supply pin. 2.7V-5.5V for the MSOP-10 variant. Bypass with a low-ESR capacitor of at least 4.7μF as close to the pin as possible. Absolute maximum 6V."+        "description": "Input supply pin. 2.7V-5.5V for the MSOP-10 variant. Bypass with a low-ESR capacitor of at least 4.7\u03bcF as close to the pin as possible. Absolute maximum 6V."       },       {         "number": "8",         "name": "EN",         "type": "input",-        "description": "Enable / shutdown input. Drive high to enable the converter, drive low to place the device into <1μA shutdown mode."+        "description": "Enable / shutdown input. Drive high to enable the converter, drive low to place the device into <1\u03bcA shutdown mode."       },       {         "number": "9",         "name": "FB",         "type": "input",-        "description": "Feedback pin. Regulated to an internal 1.22V reference; connect to the mid-point of the output resistor divider to program VOUT (VOUT = 1.22 × (1 + R1/R2))."+        "description": "Feedback pin. Regulated to an internal 1.22V reference; connect to the mid-point of the output resistor divider to program VOUT (VOUT = 1.22 \u00d7 (1 + R1/R2))."       },       {         "number": "10",         "name": "VC",         "type": "output",-        "description": "Error-amplifier output / loop-compensation node. Connect an external RC network (e.g. 15kΩ + 1.5nF to GND per the application circuit) here to shape the control-loop response."+        "description": "Error-amplifier output / loop-compensation node. Connect an external RC network (e.g. 15k\u03a9 + 1.5nF to GND per the application circuit) here to shape the control-loop response."       }     ],     "provenance": {