component
TUSB3410RHBR
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), TQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+69@@ -0,0 +1,69 @@+# TUSB3410RHBR++**Texas Instruments** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFN-32-EP(5x5)++TUSB3410RHBR from Texas Instruments, in a TQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VREGEN | input | Active-low enable for 3.3-V to 1.8-V voltage regulator. |+| 2 | SUSPEND | output | Suspend mode indicator; asserted high when device is in suspend mode. |+| 3 | VCC | power_in | 3.3 V power supply. |+| 4 | VDD18 | power_in | 1.8 V supply; internally generated when VREGEN is low, externally supplied when VREGEN is high. |+| 5 | PUR | output | Pullup resistor connection for external pullup network. |+| 6 | DP | bidirectional | Upstream USB port differential data plus. |+| 7 | DM | bidirectional | Upstream USB port differential data minus. |+| 8 | GND | power_in | Digital ground. |+| 9 | RESET | input | Device master reset input; active low. |+| 10 | SDA | bidirectional | Master I2C controller data signal with internal pullup resistor. |+| 11 | SCL | output | Master I2C controller clock signal. |+| 12 | WAKEUP | input | Remote wake-up request input; active low to wake up system. |+| 13 | CTS | input | UART clear to send input. |+| 14 | DSR | input | UART data set ready input. |+| 15 | DCD | input | UART data carrier detect input. |+| 16 | RI/CP | input | UART ring indicator input. |+| 17 | SIN/IR_SIN | input | UART serial input data or IR serial data input. |+| 18 | GND | power_in | Digital ground. |+| 19 | SOUT/IR_SOUT | output | UART serial output data or IR serial data output. |+| 20 | RTS | output | UART request to send output. |+| 21 | DTR | output | UART data terminal ready output. |+| 22 | CLKOUT | output | Clock output controlled by CLKOUTEN and CLKSLCT bits in MODECNFG register. |+| 23 | TEST0 | input | Test input for factory test only; must be tied to VCC through 10-kΩ resistor. |+| 24 | TEST1 | input | Test input for factory test only; must be tied to VCC through 10-kΩ resistor. |+| 25 | VCC | power_in | 3.3 V power supply. |+| 26 | X2 | output | 12-MHz crystal oscillator output. |+| 27 | X1/CLKI | input | 12-MHz crystal oscillator input or external clock input. |+| 28 | GND | power_in | Digital ground. |+| 29 | P3.4 | bidirectional | General-purpose I/O 4 on port 3 terminal 4; open-drain output with TTL input. |+| 30 | P3.3 | bidirectional | General-purpose I/O 3 on port 3 terminal 3; open-drain output with TTL input. |+| 31 | P3.1 | bidirectional | General-purpose I/O 1 on port 3 terminal 1; open-drain output with TTL input. |+| 32 | P3.0 | bidirectional | General-purpose I/O 0 on port 3 terminal 0; open-drain output with TTL input. |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TQFN-32-EP(5x5) |+| Category | Single Chip Microcomputer/Microcontroller |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `TUSB3410RHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: TQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `tusb3410rhbr-etched.step` / `tusb3410rhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tusb3410rhbr.step` / `tusb3410rhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tusb3410) (107 pp, sha256 `1ee2c8831308d541`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tusb3410rhbr-datasheet.pdf)
page.jsonadded+350@@ -0,0 +1,350 @@+{+ "slug": "tusb3410rhbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), TQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "single chip microcomputer-microcontroller",+ "tusb3410rhbr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tusb3410rhbr.kicad_sym",+ "tusb3410rhbr.kicad_mod",+ "tusb3410rhbr.glb",+ "tusb3410rhbr.step",+ "tusb3410rhbr.lbr",+ "docs/hero.png",+ "docs/tusb3410rhbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tusb3410rhbr-hero.glb",+ "tusb3410rhbr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TUSB3410RHBR",+ "manufacturer": "Texas Instruments",+ "package": "TQFN-32-EP(5x5)",+ "pin_count": 33,+ "category": "Single Chip Microcomputer/Microcontroller",+ "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tusb3410",+ "parts": {+ "symbol": "tusb3410rhbr.kicad_sym",+ "footprint": "tusb3410rhbr.kicad_mod",+ "model_3d": "tusb3410rhbr-hero.glb",+ "model_3d_plain": "tusb3410rhbr.glb",+ "model_3d_step": "tusb3410rhbr-etched.step",+ "model_3d_step_plain": "tusb3410rhbr.step",+ "lbr": "tusb3410rhbr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2679332",+ "digikey": "TUSB3410RHBR-ND",+ "mouser": "595-TUSB3410RHBR"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T09:12:23Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "TUSB3410RHBR-ND",+ "status": "found",+ "lifecycle": "Obsolete"+ },+ "mouser": {+ "pn": "595-TUSB3410RHBR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VREGEN",+ "type": "input",+ "description": "Active-low enable for 3.3-V to 1.8-V voltage regulator."+ },+ {+ "number": "2",+ "name": "SUSPEND",+ "type": "output",+ "description": "Suspend mode indicator; asserted high when device is in suspend mode."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "3.3 V power supply."+ },+ {+ "number": "4",+ "name": "VDD18",+ "type": "power_in",+ "description": "1.8 V supply; internally generated when VREGEN is low, externally supplied when VREGEN is high."+ },+ {+ "number": "5",+ "name": "PUR",+ "type": "output",+ "description": "Pullup resistor connection for external pullup network."+ },+ {+ "number": "6",+ "name": "DP",+ "type": "bidirectional",+ "description": "Upstream USB port differential data plus."+ },+ {+ "number": "7",+ "name": "DM",+ "type": "bidirectional",+ "description": "Upstream USB port differential data minus."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "9",+ "name": "RESET",+ "type": "input",+ "description": "Device master reset input; active low."+ },+ {+ "number": "10",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Master I2C controller data signal with internal pullup resistor."+ },+ {+ "number": "11",+ "name": "SCL",+ "type": "output",+ "description": "Master I2C controller clock signal."+ },+ {+ "number": "12",+ "name": "WAKEUP",+ "type": "input",+ "description": "Remote wake-up request input; active low to wake up system."+ },+ {+ "number": "13",+ "name": "CTS",+ "type": "input",+ "description": "UART clear to send input."+ },+ {+ "number": "14",+ "name": "DSR",+ "type": "input",+ "description": "UART data set ready input."+ },+ {+ "number": "15",+ "name": "DCD",+ "type": "input",+ "description": "UART data carrier detect input."+ },+ {+ "number": "16",+ "name": "RI/CP",+ "type": "input",+ "description": "UART ring indicator input."+ },+ {+ "number": "17",+ "name": "SIN/IR_SIN",+ "type": "input",+ "description": "UART serial input data or IR serial data input."+ },+ {+ "number": "18",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "19",+ "name": "SOUT/IR_SOUT",+ "type": "output",+ "description": "UART serial output data or IR serial data output."+ },+ {+ "number": "20",+ "name": "RTS",+ "type": "output",+ "description": "UART request to send output."+ },+ {+ "number": "21",+ "name": "DTR",+ "type": "output",+ "description": "UART data terminal ready output."+ },+ {+ "number": "22",+ "name": "CLKOUT",+ "type": "output",+ "description": "Clock output controlled by CLKOUTEN and CLKSLCT bits in MODECNFG register."+ },+ {+ "number": "23",+ "name": "TEST0",+ "type": "input",+ "description": "Test input for factory test only; must be tied to VCC through 10-kΩ resistor."+ },+ {+ "number": "24",+ "name": "TEST1",+ "type": "input",+ "description": "Test input for factory test only; must be tied to VCC through 10-kΩ resistor."+ },+ {+ "number": "25",+ "name": "VCC",+ "type": "power_in",+ "description": "3.3 V power supply."+ },+ {+ "number": "26",+ "name": "X2",+ "type": "output",+ "description": "12-MHz crystal oscillator output."+ },+ {+ "number": "27",+ "name": "X1/CLKI",+ "type": "input",+ "description": "12-MHz crystal oscillator input or external clock input."+ },+ {+ "number": "28",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "29",+ "name": "P3.4",+ "type": "bidirectional",+ "description": "General-purpose I/O 4 on port 3 terminal 4; open-drain output with TTL input."+ },+ {+ "number": "30",+ "name": "P3.3",+ "type": "bidirectional",+ "description": "General-purpose I/O 3 on port 3 terminal 3; open-drain output with TTL input."+ },+ {+ "number": "31",+ "name": "P3.1",+ "type": "bidirectional",+ "description": "General-purpose I/O 1 on port 3 terminal 1; open-drain output with TTL input."+ },+ {+ "number": "32",+ "name": "P3.0",+ "type": "bidirectional",+ "description": "General-purpose I/O 0 on port 3 terminal 0; open-drain output with TTL input."+ },+ {+ "number": "33",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 10,+ "cost_usd": 0.1376,+ "at": "2026-10-07T09:12:05"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tusb3410",+ "pages": 107,+ "sha256": "1ee2c8831308d541",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tusb3410rhbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5,+ 5,+ 0.875+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tusb3410rhbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5,+ 5,+ 0.875+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b19c8bc2664c4735d997e59a070e8c779bed29144c1addb1a1d5c6ae1a225a58",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}