component
TUSB1106IPWRQ1
Public Made by Adomby adom
Texas Instruments USB Converters, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# TUSB1106IPWRQ1++**Texas Instruments** · USB Converters · TSSOP-16++TUSB1106IPWRQ1 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Vpu(3.3) | power_out | Pullup supply voltage output (3.3 V ± 10%), supplies external 1.5-kΩ resistor on D+ (full-speed) or D- (low-speed); controlled by SOFTCON input. |+| 2 | SOFTCON | input | Software-controlled USB connection input; HIGH level applies 3.3 V to Vpu(3.3), LOW level sets high impedance. |+| 3 | OE | input | Output enable input (active LOW, CMOS level with respect to VCC(I/O)); enables transceiver to transmit data on USB bus. |+| 4 | RCV | output | Differential data receiver output (CMOS level with respect to VCC(I/O), 4-mA push-pull drive); driven LOW when SUSPND = HIGH, output state preserved during SE0 condition. |+| 5 | VP | output | Single-ended D+ receiver output (CMOS level with respect to VCC(I/O), 4-mA push-pull drive); for SE0 detection and error conditions, driven HIGH when VCC(5.0) and Vreg(3.3) not connected. |+| 6 | VM | output | Single-ended D- receiver output (CMOS level with respect to VCC(I/O), 4-mA push-pull drive); for SE0 detection and error conditions, driven HIGH when VCC(5.0) and Vreg(3.3) not connected. |+| 7 | SUSPND | input | Suspend mode input (CMOS level with respect to VCC(I/O)); HIGH level enables low-power state while USB bus inactive and drives RCV to LOW. |+| 8 | GND | power_in | Ground supply reference. |+| 9 | VCC(I/O) | power_in | Digital I/O supply voltage input (1.65 V to 3.6 V); when not connected, D+ and D- pins are placed in 3-state. |+| 10 | SPEED | input | Speed selection input (CMOS level with respect to VCC(I/O)); LOW selects 1.5 Mbit/s low-speed mode, HIGH selects 12 Mbit/s full-speed mode; controls slew rate of D+ and D- outputs. |+| 11 | D- | bidirectional | Negative USB data bus connection (analog, differential, 0 to 3.6 V); for low-speed mode connect via 1.5-kΩ resistor; transmits and receives differential data. |+| 12 | D+ | bidirectional | Positive USB data bus connection (analog, differential, 0 to 3.6 V); for full-speed mode connect via 1.5-kΩ resistor; transmits and receives differential data. |+| 13 | VPO | input | Differential mode driver data input (CMOS level with respect to VCC(I/O), Schmitt trigger, push-pull); used in differential input mode when MODE = HIGH. |+| 14 | VMO | input | Differential mode driver data input (CMOS level with respect to VCC(I/O), Schmitt trigger, push-pull); used in differential input mode when MODE = HIGH or single-ended FSE0 mode when MODE = LOW. |+| 15 | Vreg(3.3) | power_out | Regulated supply voltage (3 V to 3.6 V) output from internal regulator, or supply input in regulator bypass mode; minimum 0.1 μF decoupling capacitor required. |+| 16 | VCC(5.0) | power_in | Supply voltage input for internal regulator (4 V to 5.5 V); can be connected directly to USB VBUS or bypassed with Vreg(3.3) in regulator bypass mode. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Interface |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TUSB1106IPWRQ1`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `tusb1106ipwrq1-etched.step` / `tusb1106ipwrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tusb1106ipwrq1.step` / `tusb1106ipwrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tusb1106-q1) (24 pp, sha256 `07b97a12e725eb6e`, retrieved 2026-10-06, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tusb1106ipwrq1-datasheet.pdf)
page.jsonadded+208@@ -0,0 +1,208 @@+{+ "slug": "tusb1106ipwrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments USB Converters, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "tusb1106ipwrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tusb1106ipwrq1.kicad_sym",+ "tusb1106ipwrq1.kicad_mod",+ "tusb1106ipwrq1.glb",+ "tusb1106ipwrq1.step",+ "tusb1106ipwrq1.lbr",+ "docs/hero.png",+ "docs/tusb1106ipwrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tusb1106ipwrq1-hero.glb",+ "tusb1106ipwrq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TUSB1106IPWRQ1",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Interface",+ "subcategory": "USB Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tusb1106-q1",+ "parts": {+ "symbol": "tusb1106ipwrq1.kicad_sym",+ "footprint": "tusb1106ipwrq1.kicad_mod",+ "model_3d": "tusb1106ipwrq1-hero.glb",+ "model_3d_plain": "tusb1106ipwrq1.glb",+ "model_3d_step": "tusb1106ipwrq1-etched.step",+ "model_3d_step_plain": "tusb1106ipwrq1.step",+ "lbr": "tusb1106ipwrq1.lbr"+ },+ "distributor_links": {+ "lcsc": 2671848,+ "digikey": "TUSB1106IPWRQ1-ND",+ "mouser": "595-TUSB1106IPWRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T17:00:17Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "TUSB1106IPWRQ1-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TUSB1106IPWRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "Vpu(3.3)",+ "type": "power_out",+ "description": "Pullup supply voltage output (3.3 V ± 10%), supplies external 1.5-kΩ resistor on D+ (full-speed) or D- (low-speed); controlled by SOFTCON input."+ },+ {+ "number": "2",+ "name": "SOFTCON",+ "type": "input",+ "description": "Software-controlled USB connection input; HIGH level applies 3.3 V to Vpu(3.3), LOW level sets high impedance."+ },+ {+ "number": "3",+ "name": "OE",+ "type": "input",+ "description": "Output enable input (active LOW, CMOS level with respect to VCC(I/O)); enables transceiver to transmit data on USB bus."+ },+ {+ "number": "4",+ "name": "RCV",+ "type": "output",+ "description": "Differential data receiver output (CMOS level with respect to VCC(I/O), 4-mA push-pull drive); driven LOW when SUSPND = HIGH, output state preserved during SE0 condition."+ },+ {+ "number": "5",+ "name": "VP",+ "type": "output",+ "description": "Single-ended D+ receiver output (CMOS level with respect to VCC(I/O), 4-mA push-pull drive); for SE0 detection and error conditions, driven HIGH when VCC(5.0) and Vreg(3.3) not connected."+ },+ {+ "number": "6",+ "name": "VM",+ "type": "output",+ "description": "Single-ended D- receiver output (CMOS level with respect to VCC(I/O), 4-mA push-pull drive); for SE0 detection and error conditions, driven HIGH when VCC(5.0) and Vreg(3.3) not connected."+ },+ {+ "number": "7",+ "name": "SUSPND",+ "type": "input",+ "description": "Suspend mode input (CMOS level with respect to VCC(I/O)); HIGH level enables low-power state while USB bus inactive and drives RCV to LOW."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground supply reference."+ },+ {+ "number": "9",+ "name": "VCC(I/O)",+ "type": "power_in",+ "description": "Digital I/O supply voltage input (1.65 V to 3.6 V); when not connected, D+ and D- pins are placed in 3-state."+ },+ {+ "number": "10",+ "name": "SPEED",+ "type": "input",+ "description": "Speed selection input (CMOS level with respect to VCC(I/O)); LOW selects 1.5 Mbit/s low-speed mode, HIGH selects 12 Mbit/s full-speed mode; controls slew rate of D+ and D- outputs."+ },+ {+ "number": "11",+ "name": "D–",+ "type": "bidirectional",+ "description": "Negative USB data bus connection (analog, differential, 0 to 3.6 V); for low-speed mode connect via 1.5-kΩ resistor; transmits and receives differential data."+ },+ {+ "number": "12",+ "name": "D+",+ "type": "bidirectional",+ "description": "Positive USB data bus connection (analog, differential, 0 to 3.6 V); for full-speed mode connect via 1.5-kΩ resistor; transmits and receives differential data."+ },+ {+ "number": "13",+ "name": "VPO",+ "type": "input",+ "description": "Differential mode driver data input (CMOS level with respect to VCC(I/O), Schmitt trigger, push-pull); used in differential input mode when MODE = HIGH."+ },+ {+ "number": "14",+ "name": "VMO",+ "type": "input",+ "description": "Differential mode driver data input (CMOS level with respect to VCC(I/O), Schmitt trigger, push-pull); used in differential input mode when MODE = HIGH or single-ended FSE0 mode when MODE = LOW."+ },+ {+ "number": "15",+ "name": "Vreg(3.3)",+ "type": "power_out",+ "description": "Regulated supply voltage (3 V to 3.6 V) output from internal regulator, or supply input in regulator bypass mode; minimum 0.1 μF decoupling capacitor required."+ },+ {+ "number": "16",+ "name": "VCC(5.0)",+ "type": "power_in",+ "description": "Supply voltage input for internal regulator (4 V to 5.5 V); can be connected directly to USB VBUS or bypassed with Vreg(3.3) in regulator bypass mode."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Vreg(3.3) serves dual purpose: regulated output in internal regulator mode (3-3.6V output) and suppl"+ ],+ "pages_sent": 24,+ "cost_usd": 0.1924,+ "at": "2026-10-06T17:00:01"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tusb1106-q1",+ "pages": 24,+ "sha256": "07b97a12e725eb6e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}