component
TSV714IPT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# TSV714IPT++**STMicroelectronics** · Operational Amplifier · TSSOP-14++TSV714IPT from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUT1 | output | Output of amplifier 1, rail-to-rail output swinging to within 40 mV of the upper rail and 75 mV of the lower rail with a 10 kΩ load. |+| 2 | IN1- | input | Inverting input of amplifier 1, with input voltage range VCC- - 0.2 V to VCC+ + 0.2 V and current limited to 10 mA by a series resistor. |+| 3 | IN1+ | input | Non-inverting input of amplifier 1, rail-to-rail with common mode range VCC- - 0.1 V to VCC+ + 0.1 V. |+| 4 | VCC+ | power_in | Positive supply voltage, 1.5 V to 5.5 V operating (6 V absolute maximum), decoupled with a 10 nF capacitor placed close to the pin. |+| 5 | IN2+ | input | Non-inverting input of amplifier 2, rail-to-rail with common mode range VCC- - 0.1 V to VCC+ + 0.1 V. |+| 6 | IN2- | input | Inverting input of amplifier 2, with input voltage range VCC- - 0.2 V to VCC+ + 0.2 V and current limited to 10 mA by a series resistor. |+| 7 | OUT2 | output | Output of amplifier 2, rail-to-rail output swinging to within 40 mV of the upper rail and 75 mV of the lower rail with a 10 kΩ load. |+| 8 | OUT3 | output | Output of amplifier 3, rail-to-rail output swinging to within 40 mV of the upper rail and 75 mV of the lower rail with a 10 kΩ load. |+| 9 | IN3- | input | Inverting input of amplifier 3, with input voltage range VCC- - 0.2 V to VCC+ + 0.2 V and current limited to 10 mA by a series resistor. |+| 10 | IN3+ | input | Non-inverting input of amplifier 3, rail-to-rail with common mode range VCC- - 0.1 V to VCC+ + 0.1 V. |+| 11 | VCC- | power_in | Negative supply or ground reference; all voltages except differential are referenced to this network ground terminal. |+| 12 | IN4+ | input | Non-inverting input of amplifier 4, rail-to-rail with common mode range VCC- - 0.1 V to VCC+ + 0.1 V. |+| 13 | IN4- | input | Inverting input of amplifier 4, with input voltage range VCC- - 0.2 V to VCC+ + 0.2 V and current limited to 10 mA by a series resistor. |+| 14 | OUT4 | output | Output of amplifier 4, rail-to-rail output swinging to within 40 mV of the upper rail and 75 mV of the lower rail with a 10 kΩ load. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TSSOP-14 |+| Category | Amplifiers/Comparators |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `TSV714IPT`+- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`+- 3D model: TSSOP-14 (KiCad packages3D, STEP)+- 3D model files: `tsv714ipt-etched.step` / `tsv714ipt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tsv714ipt.step` / `tsv714ipt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589879299801964544) (29 pp, sha256 `82e7f8fd6546691b`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tsv714ipt-datasheet.pdf)
page.jsonadded+236@@ -0,0 +1,236 @@+{+ "slug": "tsv714ipt",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "tsv714ipt",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tsv714ipt.kicad_sym",+ "tsv714ipt.kicad_mod",+ "tsv714ipt.glb",+ "tsv714ipt.step",+ "tsv714ipt.lbr",+ "docs/hero.png",+ "docs/tsv714ipt-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tsv714ipt-hero.glb",+ "tsv714ipt-hero.overlay.json"+ ],+ "component": {+ "mpn": "TSV714IPT",+ "manufacturer": "STMicroelectronics",+ "package": "TSSOP-14",+ "pin_count": 14,+ "category": "Amplifiers/Comparators",+ "subcategory": "Operational Amplifier",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589879299801964544",+ "parts": {+ "symbol": "tsv714ipt.kicad_sym",+ "footprint": "tsv714ipt.kicad_mod",+ "model_3d": "tsv714ipt-hero.glb",+ "model_3d_plain": "tsv714ipt.glb",+ "model_3d_step": "tsv714ipt-etched.step",+ "model_3d_step_plain": "tsv714ipt.step",+ "lbr": "tsv714ipt.lbr"+ },+ "distributor_links": {+ "lcsc": "C2060404",+ "digikey": "497-14079-2-ND",+ "mouser": "511-TSV714IPT"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T23:50:25Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-14079-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-TSV714IPT",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OUT1",+ "type": "output",+ "description": "Output of amplifier 1, rail-to-rail output swinging to within 40 mV of the upper rail and 75 mV of the lower rail with a 10 kΩ load."+ },+ {+ "number": "2",+ "name": "IN1-",+ "type": "input",+ "description": "Inverting input of amplifier 1, with input voltage range VCC- - 0.2 V to VCC+ + 0.2 V and current limited to 10 mA by a series resistor."+ },+ {+ "number": "3",+ "name": "IN1+",+ "type": "input",+ "description": "Non-inverting input of amplifier 1, rail-to-rail with common mode range VCC- - 0.1 V to VCC+ + 0.1 V."+ },+ {+ "number": "4",+ "name": "VCC+",+ "type": "power_in",+ "description": "Positive supply voltage, 1.5 V to 5.5 V operating (6 V absolute maximum), decoupled with a 10 nF capacitor placed close to the pin."+ },+ {+ "number": "5",+ "name": "IN2+",+ "type": "input",+ "description": "Non-inverting input of amplifier 2, rail-to-rail with common mode range VCC- - 0.1 V to VCC+ + 0.1 V."+ },+ {+ "number": "6",+ "name": "IN2-",+ "type": "input",+ "description": "Inverting input of amplifier 2, with input voltage range VCC- - 0.2 V to VCC+ + 0.2 V and current limited to 10 mA by a series resistor."+ },+ {+ "number": "7",+ "name": "OUT2",+ "type": "output",+ "description": "Output of amplifier 2, rail-to-rail output swinging to within 40 mV of the upper rail and 75 mV of the lower rail with a 10 kΩ load."+ },+ {+ "number": "8",+ "name": "OUT3",+ "type": "output",+ "description": "Output of amplifier 3, rail-to-rail output swinging to within 40 mV of the upper rail and 75 mV of the lower rail with a 10 kΩ load."+ },+ {+ "number": "9",+ "name": "IN3-",+ "type": "input",+ "description": "Inverting input of amplifier 3, with input voltage range VCC- - 0.2 V to VCC+ + 0.2 V and current limited to 10 mA by a series resistor."+ },+ {+ "number": "10",+ "name": "IN3+",+ "type": "input",+ "description": "Non-inverting input of amplifier 3, rail-to-rail with common mode range VCC- - 0.1 V to VCC+ + 0.1 V."+ },+ {+ "number": "11",+ "name": "VCC-",+ "type": "power_in",+ "description": "Negative supply or ground reference; all voltages except differential are referenced to this network ground terminal."+ },+ {+ "number": "12",+ "name": "IN4+",+ "type": "input",+ "description": "Non-inverting input of amplifier 4, rail-to-rail with common mode range VCC- - 0.1 V to VCC+ + 0.1 V."+ },+ {+ "number": "13",+ "name": "IN4-",+ "type": "input",+ "description": "Inverting input of amplifier 4, with input voltage range VCC- - 0.2 V to VCC+ + 0.2 V and current limited to 10 mA by a series resistor."+ },+ {+ "number": "14",+ "name": "OUT4",+ "type": "output",+ "description": "Output of amplifier 4, rail-to-rail output swinging to within 40 mV of the upper rail and 75 mV of the lower rail with a 10 kΩ load."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 29,+ "cost_usd": 0.484,+ "at": "2026-10-07T23:50:05"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589879299801964544",+ "pages": 29,+ "sha256": "82e7f8fd6546691b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tsv714ipt.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tsv714ipt-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a4bb49ee27638da12952a523fd19616ade70f36ce8139558f6f174e1eeb4a146",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}