component
TSV6395IPT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# TSV6395IPT++**STMicroelectronics** · Operational Amplifier · TSSOP-16++TSV6395IPT from STMicroelectronics, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Out1 | output | Output of amplifier 1, rail-to-rail, within 35 mV max of the rails with a 10 kΩ load; high impedance when SHDN1/2 is low. |+| 2 | In1- | input | Inverting input of amplifier 1, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |+| 3 | In1+ | input | Non-inverting input of amplifier 1, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |+| 4 | VCC+ | power_in | Positive supply voltage, 1.5 V to 5.5 V operating range (6 V absolute maximum), decoupled with 10 nF close to the pin. |+| 5 | In2+ | input | Non-inverting input of amplifier 2, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |+| 6 | In2- | input | Inverting input of amplifier 2, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |+| 7 | Out2 | output | Output of amplifier 2, rail-to-rail, within 35 mV max of the rails with a 10 kΩ load; high impedance when SHDN1/2 is low. |+| 8 | SHDN1/2 | input | Active-low shutdown for amplifiers 1 and 2: pull to VCC- to disable and to VCC+ to enable, never leave floating; VIH 2 V min and VIL 0.8 V max at 5 V. |+| 9 | SHDN3/4 | input | Active-low shutdown for amplifiers 3 and 4: pull to VCC- to disable and to VCC+ to enable, never leave floating; VIH 2 V min and VIL 0.8 V max at 5 V. |+| 10 | Out3 | output | Output of amplifier 3, rail-to-rail, within 35 mV max of the rails with a 10 kΩ load; high impedance when SHDN3/4 is low. |+| 11 | In3- | input | Inverting input of amplifier 3, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |+| 12 | In3+ | input | Non-inverting input of amplifier 3, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |+| 13 | VCC- | power_in | Negative supply voltage (ground in single-supply operation); the shutdown pins are pulled to this level to disable the amplifiers. |+| 14 | In4+ | input | Non-inverting input of amplifier 4, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |+| 15 | In4- | input | Inverting input of amplifier 4, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |+| 16 | Out4 | output | Output of amplifier 4, rail-to-rail, within 35 mV max of the rails with a 10 kΩ load; high impedance when SHDN3/4 is low. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TSSOP-16 |+| Category | Amplifiers/Comparators |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TSV6395IPT`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `tsv6395ipt-etched.step` / `tsv6395ipt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tsv6395ipt.step` / `tsv6395ipt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589881851981692928) (25 pp, sha256 `bfffcfa95779f0a1`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tsv6395ipt-datasheet.pdf)
page.jsonadded+249@@ -0,0 +1,249 @@+{+ "slug": "tsv6395ipt",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Operational Amplifier, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "tsv6395ipt",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tsv6395ipt.kicad_sym",+ "tsv6395ipt.kicad_mod",+ "tsv6395ipt.glb",+ "tsv6395ipt.step",+ "tsv6395ipt.lbr",+ "docs/hero.png",+ "docs/tsv6395ipt-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tsv6395ipt-hero.glb",+ "tsv6395ipt-hero.overlay.json"+ ],+ "component": {+ "mpn": "TSV6395IPT",+ "manufacturer": "STMicroelectronics",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Amplifiers/Comparators",+ "subcategory": "Operational Amplifier",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589881851981692928",+ "parts": {+ "symbol": "tsv6395ipt.kicad_sym",+ "footprint": "tsv6395ipt.kicad_mod",+ "model_3d": "tsv6395ipt-hero.glb",+ "model_3d_plain": "tsv6395ipt.glb",+ "model_3d_step": "tsv6395ipt-etched.step",+ "model_3d_step_plain": "tsv6395ipt.step",+ "lbr": "tsv6395ipt.lbr"+ },+ "distributor_links": {+ "lcsc": "C2058534",+ "digikey": "497-10465-2-ND",+ "mouser": "511-TSV6395IPT"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T20:26:09Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-10465-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-TSV6395IPT",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "Out1",+ "type": "output",+ "description": "Output of amplifier 1, rail-to-rail, within 35 mV max of the rails with a 10 kΩ load; high impedance when SHDN1/2 is low."+ },+ {+ "number": "2",+ "name": "In1-",+ "type": "input",+ "description": "Inverting input of amplifier 1, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V."+ },+ {+ "number": "3",+ "name": "In1+",+ "type": "input",+ "description": "Non-inverting input of amplifier 1, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V."+ },+ {+ "number": "4",+ "name": "VCC+",+ "type": "power_in",+ "description": "Positive supply voltage, 1.5 V to 5.5 V operating range (6 V absolute maximum), decoupled with 10 nF close to the pin."+ },+ {+ "number": "5",+ "name": "In2+",+ "type": "input",+ "description": "Non-inverting input of amplifier 2, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V."+ },+ {+ "number": "6",+ "name": "In2-",+ "type": "input",+ "description": "Inverting input of amplifier 2, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V."+ },+ {+ "number": "7",+ "name": "Out2",+ "type": "output",+ "description": "Output of amplifier 2, rail-to-rail, within 35 mV max of the rails with a 10 kΩ load; high impedance when SHDN1/2 is low."+ },+ {+ "number": "8",+ "name": "SHDN1/2",+ "type": "input",+ "description": "Active-low shutdown for amplifiers 1 and 2: pull to VCC- to disable and to VCC+ to enable, never leave floating; VIH 2 V min and VIL 0.8 V max at 5 V."+ },+ {+ "number": "9",+ "name": "SHDN3/4",+ "type": "input",+ "description": "Active-low shutdown for amplifiers 3 and 4: pull to VCC- to disable and to VCC+ to enable, never leave floating; VIH 2 V min and VIL 0.8 V max at 5 V."+ },+ {+ "number": "10",+ "name": "Out3",+ "type": "output",+ "description": "Output of amplifier 3, rail-to-rail, within 35 mV max of the rails with a 10 kΩ load; high impedance when SHDN3/4 is low."+ },+ {+ "number": "11",+ "name": "In3-",+ "type": "input",+ "description": "Inverting input of amplifier 3, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V."+ },+ {+ "number": "12",+ "name": "In3+",+ "type": "input",+ "description": "Non-inverting input of amplifier 3, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V."+ },+ {+ "number": "13",+ "name": "VCC-",+ "type": "power_in",+ "description": "Negative supply voltage (ground in single-supply operation); the shutdown pins are pulled to this level to disable the amplifiers."+ },+ {+ "number": "14",+ "name": "In4+",+ "type": "input",+ "description": "Non-inverting input of amplifier 4, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V."+ },+ {+ "number": "15",+ "name": "In4-",+ "type": "input",+ "description": "Inverting input of amplifier 4, with common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V."+ },+ {+ "number": "16",+ "name": "Out4",+ "type": "output",+ "description": "Output of amplifier 4, rail-to-rail, within 35 mV max of the rails with a 10 kΩ load; high impedance when SHDN3/4 is low."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: SHDN pins are drawn as active-low (overbar) and the text says amplifiers are enabled when SHDN is pu",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 25,+ "cost_usd": 0.3794,+ "at": "2026-10-08T20:25:54"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589881851981692928",+ "pages": 25,+ "sha256": "bfffcfa95779f0a1",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tsv6395ipt.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tsv6395ipt-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "8986c0114a1e48ef5f44b59dc0833f04bc8d2a9ef3515ba830d9b1d99d1faf07",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}