component
TSH122ICT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, SOT-363-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "IN", "type": "input",- "description": "Analog video input to the internal voltage-feedback amplifier. An internal DC-shift lets the video signal reach close to 0 V; the amplifier applies an internal gain of ~6 dB (\u00d72) toward the output. Input amplitude must remain within 0 V to Vcc."+ "description": "Analog video input to the internal voltage-feedback amplifier. An internal DC-shift lets the video signal reach close to 0 V; the amplifier applies an internal gain of ~6 dB (×2) toward the output. Input amplitude must remain within 0 V to Vcc." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "SAG", "type": "output",- "description": "SAG-correction pin used to compensate the low-frequency droop introduced by an AC-coupling capacitor on the output video line. Connects to the external SAG-correction network (series capacitor / resistor to the load coupling capacitor) so the buffer can restore the low-frequency response of the 75 \u03a9 video path."+ "description": "SAG-correction pin used to compensate the low-frequency droop introduced by an AC-coupling capacitor on the output video line. Connects to the external SAG-correction network (series capacitor / resistor to the load coupling capacitor) so the buffer can restore the low-frequency response of the 75 Ω video path." }, { "number": "4", "name": "OUT", "type": "output",- "description": "Rail-to-rail buffered video output intended to drive a 75 \u03a9 video load. Typical output short-circuit current 75 mA; VOH \u2248 3.2 V at Vcc = 3.3 V, VOL \u2248 11 mV (RL = 150 \u03a9)."+ "description": "Rail-to-rail buffered video output intended to drive a 75 Ω video load. Typical output short-circuit current 75 mA; VOH ≈ 3.2 V at Vcc = 3.3 V, VOL ≈ 11 mV (RL = 150 Ω)." }, { "number": "5", "name": "EN", "type": "input",- "description": "Enable / power-down control input. Logic-high (\u2265 +0.7 V, up to Vcc) enables the TSH122; logic-low (0 to +0.3 V) forces power-down mode (typ. 4 nA, max 500 nA). Ton/Toff \u2248 1 \u00b5s."+ "description": "Enable / power-down control input. Logic-high (≥ +0.7 V, up to Vcc) enables the TSH122; logic-low (0 to +0.3 V) forces power-down mode (typ. 4 nA, max 500 nA). Ton/Toff ≈ 1 µs." }, { "number": "6",@@ -132,5 +132,8 @@ "docs/tsh122ict-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }