component
TSC2007IPWRQ1
Public Made by Adomby adom
Texas Instruments Touch Screen Controllers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# TSC2007IPWRQ1++**Texas Instruments** · Touch Screen Controllers · TSSOP-16++TSC2007IPWRQ1 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD/REF | power_in | Supply voltage and external reference input; VDD is specified at 1.2 V to 3.6 V and the device should be bypassed with a 0.1-µF ceramic capacitor between VDD/REF and GND. |+| 2 | X+ | input | Analog X+ channel input for the 4-wire resistive touch screen; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND. |+| 3 | Y+ | input | Analog Y+ channel input for the 4-wire resistive touch screen; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND. |+| 4 | X- | input | Analog X- channel input for the 4-wire resistive touch screen; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND. |+| 5 | Y- | input | Analog Y- channel input for the 4-wire resistive touch screen; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND. |+| 6 | GND | power_in | Ground reference; the datasheet requires a clean ground point, ideally the analog ground, kept away from microcontroller or DSP ground. |+| 7 | NC | unconnected | No connection; leave this pin unconnected. |+| 8 | NC | unconnected | No connection; leave this pin unconnected. |+| 9 | NC | unconnected | No connection; leave this pin unconnected. |+| 10 | PENIRQ | output | Active-low data-available interrupt output that signals a delayed pen-touch detect; it is used with an external pullup resistor (RIRQ). |+| 11 | SDA | bidirectional | I2C serial data input/output. |+| 12 | SCL | bidirectional | I2C serial clock; normally an input, but it acts as an output when the device stretches the clock to delay a bus transfer. |+| 13 | A1 | input | Digital address input bit 1 for setting the I2C address. |+| 14 | A0 | input | Digital address input bit 0 for setting the I2C address. |+| 15 | NC | unconnected | No connection; leave this pin unconnected. |+| 16 | AUX | input | Analog auxiliary channel input; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TSC2007IPWRQ1`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `tsc2007ipwrq1-etched.step` / `tsc2007ipwrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tsc2007ipwrq1.step` / `tsc2007ipwrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tsc2007-q1) (43 pp, sha256 `78191dd83ef22316`, retrieved 2026-10-07, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tsc2007ipwrq1-datasheet.pdf)
page.jsonadded+248@@ -0,0 +1,248 @@+{+ "slug": "tsc2007ipwrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Touch Screen Controllers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "tsc2007ipwrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tsc2007ipwrq1.kicad_sym",+ "tsc2007ipwrq1.kicad_mod",+ "tsc2007ipwrq1.glb",+ "tsc2007ipwrq1.step",+ "tsc2007ipwrq1.lbr",+ "docs/hero.png",+ "docs/tsc2007ipwrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tsc2007ipwrq1-hero.glb",+ "tsc2007ipwrq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TSC2007IPWRQ1",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Data Acquisition",+ "subcategory": "Touch Screen Controllers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tsc2007-q1",+ "parts": {+ "symbol": "tsc2007ipwrq1.kicad_sym",+ "footprint": "tsc2007ipwrq1.kicad_mod",+ "model_3d": "tsc2007ipwrq1-hero.glb",+ "model_3d_plain": "tsc2007ipwrq1.glb",+ "model_3d_step": "tsc2007ipwrq1-etched.step",+ "model_3d_step_plain": "tsc2007ipwrq1.step",+ "lbr": "tsc2007ipwrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2864305",+ "digikey": "296-42398-2-ND",+ "mouser": "595-TSC2007IPWRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T22:40:13Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-42398-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TSC2007IPWRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD/REF",+ "type": "power_in",+ "description": "Supply voltage and external reference input; VDD is specified at 1.2 V to 3.6 V and the device should be bypassed with a 0.1-µF ceramic capacitor between VDD/REF and GND."+ },+ {+ "number": "2",+ "name": "X+",+ "type": "input",+ "description": "Analog X+ channel input for the 4-wire resistive touch screen; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND."+ },+ {+ "number": "3",+ "name": "Y+",+ "type": "input",+ "description": "Analog Y+ channel input for the 4-wire resistive touch screen; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND."+ },+ {+ "number": "4",+ "name": "X-",+ "type": "input",+ "description": "Analog X- channel input for the 4-wire resistive touch screen; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND."+ },+ {+ "number": "5",+ "name": "Y-",+ "type": "input",+ "description": "Analog Y- channel input for the 4-wire resistive touch screen; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference; the datasheet requires a clean ground point, ideally the analog ground, kept away from microcontroller or DSP ground."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave this pin unconnected."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave this pin unconnected."+ },+ {+ "number": "9",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave this pin unconnected."+ },+ {+ "number": "10",+ "name": "PENIRQ",+ "type": "output",+ "description": "Active-low data-available interrupt output that signals a delayed pen-touch detect; it is used with an external pullup resistor (RIRQ)."+ },+ {+ "number": "11",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data input/output."+ },+ {+ "number": "12",+ "name": "SCL",+ "type": "bidirectional",+ "description": "I2C serial clock; normally an input, but it acts as an output when the device stretches the clock to delay a bus transfer."+ },+ {+ "number": "13",+ "name": "A1",+ "type": "input",+ "description": "Digital address input bit 1 for setting the I2C address."+ },+ {+ "number": "14",+ "name": "A0",+ "type": "input",+ "description": "Digital address input bit 0 for setting the I2C address."+ },+ {+ "number": "15",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave this pin unconnected."+ },+ {+ "number": "16",+ "name": "AUX",+ "type": "input",+ "description": "Analog auxiliary channel input; voltage is limited to -0.4 V to VDD + 0.1 V with respect to GND."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The MPN TSC2007IPWRQ1 is the PW (TSSOP-16) variant per the package addendum on page 36, matching the; KiCad has no analog pin class, so the analog touch-screen and AUX inputs (pins 2, 3, 4, 5, 16) are t; Pin 1 (VDD/REF) is typed power_in because it is the supply pin. The datasheet also uses it as an ext"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0567,+ "at": "2026-10-07T22:39:53"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tsc2007-q1",+ "pages": 43,+ "sha256": "78191dd83ef22316",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tsc2007ipwrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tsc2007ipwrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "ed81c0b8cbb30277fac8aa4c4e2ae90ce6adc46f7a495f8824d227c10351e0aa",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}