component
TS3V330PWR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# TS3V330PWR++**Texas Instruments** · Analog Switches, Multiplexers · TSSOP-16++TS3V330PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | input | Select input that sets the data path of the 1-of-2 multiplexer/demultiplexer; it must be driven between GND and VCC, with VIH minimum 2 V and VIL maximum 0.8 V at VCC = 3 V to 3.6 V. |+| 2 | S1A | bidirectional | Analog video I/O S1 port of switch A, connected to D port DA when IN is low and EN is low, and limited to the rail-to-rail range 0 to VCC. |+| 3 | S2A | bidirectional | Analog video I/O S2 port of switch A, connected to D port DA when IN is high and EN is low, and limited to the rail-to-rail range 0 to VCC. |+| 4 | DA | bidirectional | Analog video I/O D port of switch A, which is connected to S1A or S2A depending on IN and is limited to the rail-to-rail range 0 to VCC. |+| 5 | S1B | bidirectional | Analog video I/O S1 port of switch B, connected to D port DB when IN is low and EN is low, and limited to the rail-to-rail range 0 to VCC. |+| 6 | S2B | bidirectional | Analog video I/O S2 port of switch B, connected to D port DB when IN is high and EN is low, and limited to the rail-to-rail range 0 to VCC. |+| 7 | DB | bidirectional | Analog video I/O D port of switch B, which is connected to S1B or S2B depending on IN and is limited to the rail-to-rail range 0 to VCC. |+| 8 | GND | power_in | Ground reference for the device; all voltages are referenced to ground, and unused control inputs must be held at VCC or GND. |+| 9 | DC | bidirectional | Analog video I/O D port of switch C, which is connected to S1C or S2C depending on IN and is limited to the rail-to-rail range 0 to VCC. |+| 10 | S2C | bidirectional | Analog video I/O S2 port of switch C, connected to D port DC when IN is high and EN is low, and limited to the rail-to-rail range 0 to VCC. |+| 11 | S1C | bidirectional | Analog video I/O S1 port of switch C, connected to D port DC when IN is low and EN is low, and limited to the rail-to-rail range 0 to VCC. |+| 12 | DD | bidirectional | Analog video I/O D port of switch D, which is connected to S1D or S2D depending on IN and is limited to the rail-to-rail range 0 to VCC. |+| 13 | S2D | bidirectional | Analog video I/O S2 port of switch D, connected to D port DD when IN is high and EN is low, and limited to the rail-to-rail range 0 to VCC. |+| 14 | S1D | bidirectional | Analog video I/O S1 port of switch D, connected to D port DD when IN is low and EN is low, and limited to the rail-to-rail range 0 to VCC. |+| 15 | EN | input | Active-low switch-enable input: low connects the D and S ports per IN, high disconnects them into high impedance; tie to VCC through a pullup to hold the high-impedance state during power up or down, with VIH minimum 2 V and VIL maximum 0.8 V. |+| 16 | VCC | power_in | Positive supply, operating range 3 V to 3.6 V (absolute maximum 4.6 V), with partial-power-down (Ioff) support when VCC is 0 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Interface |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TS3V330PWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `ts3v330pwr-etched.step` / `ts3v330pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ts3v330pwr.step` / `ts3v330pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ts3v330.pdf) (30 pp, sha256 `02a359e4405a8a39`, retrieved 2026-10-08, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ts3v330pwr-datasheet.pdf)
page.jsonadded+249@@ -0,0 +1,249 @@+{+ "slug": "ts3v330pwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog Switches, Multiplexers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "ts3v330pwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ts3v330pwr.kicad_sym",+ "ts3v330pwr.kicad_mod",+ "ts3v330pwr.glb",+ "ts3v330pwr.step",+ "ts3v330pwr.lbr",+ "docs/hero.png",+ "docs/ts3v330pwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ts3v330pwr-hero.glb",+ "ts3v330pwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TS3V330PWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Interface",+ "subcategory": "Analog Switches, Multiplexers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ts3v330.pdf",+ "parts": {+ "symbol": "ts3v330pwr.kicad_sym",+ "footprint": "ts3v330pwr.kicad_mod",+ "model_3d": "ts3v330pwr-hero.glb",+ "model_3d_plain": "ts3v330pwr.glb",+ "model_3d_step": "ts3v330pwr-etched.step",+ "model_3d_step_plain": "ts3v330pwr.step",+ "lbr": "ts3v330pwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2151000",+ "digikey": "296-18212-2-ND",+ "mouser": "595-TS3V330PWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:35:37Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-18212-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TS3V330PWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "input",+ "description": "Select input that sets the data path of the 1-of-2 multiplexer/demultiplexer; it must be driven between GND and VCC, with VIH minimum 2 V and VIL maximum 0.8 V at VCC = 3 V to 3.6 V."+ },+ {+ "number": "2",+ "name": "S1A",+ "type": "bidirectional",+ "description": "Analog video I/O S1 port of switch A, connected to D port DA when IN is low and EN is low, and limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "3",+ "name": "S2A",+ "type": "bidirectional",+ "description": "Analog video I/O S2 port of switch A, connected to D port DA when IN is high and EN is low, and limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "4",+ "name": "DA",+ "type": "bidirectional",+ "description": "Analog video I/O D port of switch A, which is connected to S1A or S2A depending on IN and is limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "5",+ "name": "S1B",+ "type": "bidirectional",+ "description": "Analog video I/O S1 port of switch B, connected to D port DB when IN is low and EN is low, and limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "6",+ "name": "S2B",+ "type": "bidirectional",+ "description": "Analog video I/O S2 port of switch B, connected to D port DB when IN is high and EN is low, and limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "7",+ "name": "DB",+ "type": "bidirectional",+ "description": "Analog video I/O D port of switch B, which is connected to S1B or S2B depending on IN and is limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device; all voltages are referenced to ground, and unused control inputs must be held at VCC or GND."+ },+ {+ "number": "9",+ "name": "DC",+ "type": "bidirectional",+ "description": "Analog video I/O D port of switch C, which is connected to S1C or S2C depending on IN and is limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "10",+ "name": "S2C",+ "type": "bidirectional",+ "description": "Analog video I/O S2 port of switch C, connected to D port DC when IN is high and EN is low, and limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "11",+ "name": "S1C",+ "type": "bidirectional",+ "description": "Analog video I/O S1 port of switch C, connected to D port DC when IN is low and EN is low, and limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "12",+ "name": "DD",+ "type": "bidirectional",+ "description": "Analog video I/O D port of switch D, which is connected to S1D or S2D depending on IN and is limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "13",+ "name": "S2D",+ "type": "bidirectional",+ "description": "Analog video I/O S2 port of switch D, connected to D port DD when IN is high and EN is low, and limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "14",+ "name": "S1D",+ "type": "bidirectional",+ "description": "Analog video I/O S1 port of switch D, connected to D port DD when IN is low and EN is low, and limited to the rail-to-rail range 0 to VCC."+ },+ {+ "number": "15",+ "name": "EN",+ "type": "input",+ "description": "Active-low switch-enable input: low connects the D and S ports per IN, high disconnects them into high impedance; tie to VCC through a pullup to hold the high-impedance state during power up or down, with VIH minimum 2 V and VIL maximum 0.8 V."+ },+ {+ "number": "16",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply, operating range 3 V to 3.6 V (absolute maximum 4.6 V), with partial-power-down (Ioff) support when VCC is 0 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin-to-number mapping for the TSSOP-16 (PW) package was not printed as a clean list in the extra; The datasheet lists a separate RGY (VQFN) pinout with a different pin numbering. That pinout was not; Pin types are KiCad classes chosen from the datasheet text: analog video ports are marked bidirectio",+ "1/16 pins cited to the wrong page (name found elsewhere): ['16:VCC@p5']"+ ],+ "pages_sent": 30,+ "cost_usd": 0.1055,+ "at": "2026-10-08T15:35:19"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/ts3v330.pdf",+ "pages": 30,+ "sha256": "02a359e4405a8a39",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ts3v330pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ts3v330pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "15a6acdc855933f121d2374d1bcda38f3c9b20a66560066fe2d0be5ed649d786",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}