component
TS12A44515PWR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# TS12A44515PWR++**Texas Instruments** · Analog Switches, Multiplexers · TSSOP-14++TS12A44515PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC1 | unconnected | Normally closed terminal of switch 1, connected to COM1 when IN1 is low and usable as input or output over 0 V to VCC. |+| 2 | COM1 | bidirectional | Common terminal of switch 1, bidirectional analog signal over 0 V to VCC. |+| 3 | NC2 | unconnected | Normally closed terminal of switch 2, connected to COM2 when IN2 is low and usable as input or output over 0 V to VCC. |+| 4 | COM2 | bidirectional | Common terminal of switch 2, bidirectional analog signal over 0 V to VCC. |+| 5 | IN2 | input | Digital control input for switch 2 (low connects NC2 to COM2, high disconnects), with 0.8 V max VIL and 2.4 V min VIH at 5-V supply; should not be left floating. |+| 6 | IN3 | input | Digital control input for switch 3 (low connects NC3 to COM3, high disconnects), with 0.8 V max VIL and 2.4 V min VIH at 5-V supply; should not be left floating. |+| 7 | GND | power_in | Ground. |+| 8 | NC3 | unconnected | Normally closed terminal of switch 3, connected to COM3 when IN3 is low and usable as input or output over 0 V to VCC. |+| 9 | COM3 | bidirectional | Common terminal of switch 3, bidirectional analog signal over 0 V to VCC. |+| 10 | COM4 | bidirectional | Common terminal of switch 4, bidirectional analog signal over 0 V to VCC. |+| 11 | NC4 | unconnected | Normally closed terminal of switch 4, connected to COM4 when IN4 is low and usable as input or output over 0 V to VCC. |+| 12 | IN4 | input | Digital control input for switch 4 (low connects NC4 to COM4, high disconnects), with 0.8 V max VIL and 2.4 V min VIH at 5-V supply; should not be left floating. |+| 13 | IN1 | input | Digital control input for switch 1 (low connects NC1 to COM1, high disconnects), with 0.8 V max VIL and 2.4 V min VIH at 5-V supply; should not be left floating. |+| 14 | VCC | power_in | Power supply, 2 V to 12 V recommended operating range (13 V absolute maximum). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-14 |+| Category | Interface |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `TS12A44515PWR`+- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`+- 3D model: TSSOP-14 (KiCad packages3D, STEP)+- 3D model files: `ts12a44515pwr-etched.step` / `ts12a44515pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ts12a44515pwr.step` / `ts12a44515pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ts12a44515.pdf) (26 pp, sha256 `4e81994cf082ca6c`, retrieved 2026-10-07, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ts12a44515pwr-datasheet.pdf)
page.jsonadded+236@@ -0,0 +1,236 @@+{+ "slug": "ts12a44515pwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog Switches, Multiplexers, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "ts12a44515pwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ts12a44515pwr.kicad_sym",+ "ts12a44515pwr.kicad_mod",+ "ts12a44515pwr.glb",+ "ts12a44515pwr.step",+ "ts12a44515pwr.lbr",+ "docs/hero.png",+ "docs/ts12a44515pwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ts12a44515pwr-hero.glb",+ "ts12a44515pwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TS12A44515PWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-14",+ "pin_count": 14,+ "category": "Interface",+ "subcategory": "Analog Switches, Multiplexers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ts12a44515.pdf",+ "parts": {+ "symbol": "ts12a44515pwr.kicad_sym",+ "footprint": "ts12a44515pwr.kicad_mod",+ "model_3d": "ts12a44515pwr-hero.glb",+ "model_3d_plain": "ts12a44515pwr.glb",+ "model_3d_step": "ts12a44515pwr-etched.step",+ "model_3d_step_plain": "ts12a44515pwr.step",+ "lbr": "ts12a44515pwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2673245",+ "digikey": "296-24791-2-ND",+ "mouser": "595-TS12A44515PWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T08:37:36Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-24791-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TS12A44515PWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NC1",+ "type": "unconnected",+ "description": "Normally closed terminal of switch 1, connected to COM1 when IN1 is low and usable as input or output over 0 V to VCC."+ },+ {+ "number": "2",+ "name": "COM1",+ "type": "bidirectional",+ "description": "Common terminal of switch 1, bidirectional analog signal over 0 V to VCC."+ },+ {+ "number": "3",+ "name": "NC2",+ "type": "unconnected",+ "description": "Normally closed terminal of switch 2, connected to COM2 when IN2 is low and usable as input or output over 0 V to VCC."+ },+ {+ "number": "4",+ "name": "COM2",+ "type": "bidirectional",+ "description": "Common terminal of switch 2, bidirectional analog signal over 0 V to VCC."+ },+ {+ "number": "5",+ "name": "IN2",+ "type": "input",+ "description": "Digital control input for switch 2 (low connects NC2 to COM2, high disconnects), with 0.8 V max VIL and 2.4 V min VIH at 5-V supply; should not be left floating."+ },+ {+ "number": "6",+ "name": "IN3",+ "type": "input",+ "description": "Digital control input for switch 3 (low connects NC3 to COM3, high disconnects), with 0.8 V max VIL and 2.4 V min VIH at 5-V supply; should not be left floating."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "8",+ "name": "NC3",+ "type": "unconnected",+ "description": "Normally closed terminal of switch 3, connected to COM3 when IN3 is low and usable as input or output over 0 V to VCC."+ },+ {+ "number": "9",+ "name": "COM3",+ "type": "bidirectional",+ "description": "Common terminal of switch 3, bidirectional analog signal over 0 V to VCC."+ },+ {+ "number": "10",+ "name": "COM4",+ "type": "bidirectional",+ "description": "Common terminal of switch 4, bidirectional analog signal over 0 V to VCC."+ },+ {+ "number": "11",+ "name": "NC4",+ "type": "unconnected",+ "description": "Normally closed terminal of switch 4, connected to COM4 when IN4 is low and usable as input or output over 0 V to VCC."+ },+ {+ "number": "12",+ "name": "IN4",+ "type": "input",+ "description": "Digital control input for switch 4 (low connects NC4 to COM4, high disconnects), with 0.8 V max VIL and 2.4 V min VIH at 5-V supply; should not be left floating."+ },+ {+ "number": "13",+ "name": "IN1",+ "type": "input",+ "description": "Digital control input for switch 1 (low connects NC1 to COM1, high disconnects), with 0.8 V max VIL and 2.4 V min VIH at 5-V supply; should not be left floating."+ },+ {+ "number": "14",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply, 2 V to 12 V recommended operating range (13 V absolute maximum)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: PIN 8 assignment to NC4 is inferred from pin function table listing NC at 1,3,8,11 and diagram label"+ ],+ "pages_sent": 26,+ "cost_usd": 0.2261,+ "at": "2026-10-07T08:37:20"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/ts12a44515.pdf",+ "pages": 26,+ "sha256": "4e81994cf082ca6c",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ts12a44515pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ts12a44515pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "ead4bc73241034f258d3441faffde2a03694600f0562b6a0f6aec1276dba5f01",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}