← Commit history

trsf3232ecdr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·742ce50176 · ·parent fdbdf69
2 files changed +98−18
package.json+56−16
@@ -68,13 +68,13 @@         "number": "1",         "name": "C1+",         "type": "passive",-        "description": "Positive lead of charge-pump flying capacitor C1; connect a 0.1 \u00b5F (3.3 V) or 0.047 \u00b5F (5 V) capacitor between C1+ and C1\u2212."+        "description": "Positive lead of charge-pump flying capacitor C1; connect a 0.1 µF (3.3 V) or 0.047 µF (5 V) capacitor between C1+ and C1−."       },       {         "number": "2",         "name": "V+",         "type": "power_out",-        "description": "Positive charge-pump output; connect storage capacitor (0.1 \u00b5F at 3.3 V, 0.33 \u00b5F at 5 V) to GND; maximum voltage +7 V with respect to GND."+        "description": "Positive charge-pump output; connect storage capacitor (0.1 µF at 3.3 V, 0.33 µF at 5 V) to GND; maximum voltage +7 V with respect to GND."       },       {         "number": "3",@@ -86,7 +86,7 @@         "number": "4",         "name": "C2+",         "type": "passive",-        "description": "Positive lead of charge-pump flying capacitor C2; connect a 0.1 \u00b5F (3.3 V) or 0.33 \u00b5F (5 V) capacitor between C2+ and C2\u2212."+        "description": "Positive lead of charge-pump flying capacitor C2; connect a 0.1 µF (3.3 V) or 0.33 µF (5 V) capacitor between C2+ and C2−."       },       {         "number": "5",@@ -98,67 +98,67 @@         "number": "6",         "name": "V-",         "type": "power_out",-        "description": "Negative charge-pump output; connect storage capacitor (0.1 \u00b5F at 3.3 V, 0.33 \u00b5F at 5 V) to GND; minimum voltage \u22127 V with respect to GND."+        "description": "Negative charge-pump output; connect storage capacitor (0.1 µF at 3.3 V, 0.33 µF at 5 V) to GND; minimum voltage −7 V with respect to GND."       },       {         "number": "7",         "name": "DOUT2",         "type": "output",-        "description": "RS-232 line driver output for channel 2 (to remote RS-232 system); output swings \u2265+5 V / \u2264\u22125 V into 3 k\u03a9, \u00b115 kV HBM ESD-protected, slew rate 14-150 V/\u00b5s."+        "description": "RS-232 line driver output for channel 2 (to remote RS-232 system); output swings ≥+5 V / ≤−5 V into 3 kΩ, ±15 kV HBM ESD-protected, slew rate 14-150 V/µs."       },       {         "number": "8",         "name": "RIN2",         "type": "input",-        "description": "RS-232 line receiver input for channel 2 (from remote RS-232 system); accepts \u00b125 V, 3-7 k\u03a9 internal load, \u00b115 kV HBM ESD-protected."+        "description": "RS-232 line receiver input for channel 2 (from remote RS-232 system); accepts ±25 V, 3-7 kΩ internal load, ±15 kV HBM ESD-protected."       },       {         "number": "9",         "name": "ROUT2",         "type": "output",-        "description": "Logic-level receiver output for channel 2 (to UART); VOH \u2265 VCC\u22120.6 V at \u22121 mA, VOL \u2264 0.4 V at 1.6 mA; open RIN2 forces high output."+        "description": "Logic-level receiver output for channel 2 (to UART); VOH ≥ VCC−0.6 V at −1 mA, VOL ≤ 0.4 V at 1.6 mA; open RIN2 forces high output."       },       {         "number": "10",         "name": "DIN2",         "type": "input",-        "description": "Logic-level driver input for channel 2 (from UART); VIH \u2265 2 V (3.3 V supply) / 2.4 V (5 V supply), VIL \u2264 0.8 V, accepts up to 5.5 V."+        "description": "Logic-level driver input for channel 2 (from UART); VIH ≥ 2 V (3.3 V supply) / 2.4 V (5 V supply), VIL ≤ 0.8 V, accepts up to 5.5 V."       },       {         "number": "11",         "name": "DIN1",         "type": "input",-        "description": "Logic-level driver input for channel 1 (from UART); VIH \u2265 2 V (3.3 V supply) / 2.4 V (5 V supply), VIL \u2264 0.8 V, accepts up to 5.5 V."+        "description": "Logic-level driver input for channel 1 (from UART); VIH ≥ 2 V (3.3 V supply) / 2.4 V (5 V supply), VIL ≤ 0.8 V, accepts up to 5.5 V."       },       {         "number": "12",         "name": "ROUT1",         "type": "output",-        "description": "Logic-level receiver output for channel 1 (to UART); VOH \u2265 VCC\u22120.6 V at \u22121 mA, VOL \u2264 0.4 V at 1.6 mA; open RIN1 forces high output."+        "description": "Logic-level receiver output for channel 1 (to UART); VOH ≥ VCC−0.6 V at −1 mA, VOL ≤ 0.4 V at 1.6 mA; open RIN1 forces high output."       },       {         "number": "13",         "name": "RIN1",         "type": "input",-        "description": "RS-232 line receiver input for channel 1 (from remote RS-232 system); accepts \u00b125 V, 3-7 k\u03a9 internal load, \u00b115 kV HBM ESD-protected."+        "description": "RS-232 line receiver input for channel 1 (from remote RS-232 system); accepts ±25 V, 3-7 kΩ internal load, ±15 kV HBM ESD-protected."       },       {         "number": "14",         "name": "DOUT1",         "type": "output",-        "description": "RS-232 line driver output for channel 1 (to remote RS-232 system); output swings \u2265+5 V / \u2264\u22125 V into 3 k\u03a9, \u00b115 kV HBM ESD-protected, slew rate 14-150 V/\u00b5s."+        "description": "RS-232 line driver output for channel 1 (to remote RS-232 system); output swings ≥+5 V / ≤−5 V into 3 kΩ, ±15 kV HBM ESD-protected, slew rate 14-150 V/µs."       },       {         "number": "15",         "name": "GND",         "type": "power_in",-        "description": "Ground reference; all voltages (VCC, V+, V\u2212) are referenced to this pin."+        "description": "Ground reference; all voltages (VCC, V+, V−) are referenced to this pin."       },       {         "number": "16",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage; connect to 3 V-5.5 V external supply; bypass with \u22650.1 \u00b5F capacitor to GND; quiescent current 300 \u00b5A typical, 1 mA maximum."+        "description": "Supply voltage; connect to 3 V-5.5 V external supply; bypass with ≥0.1 µF capacitor to GND; quiescent current 300 µA typical, 1 mA maximum."       }     ],     "provenance": {@@ -193,6 +193,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "trsf3232ecdr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "trsf3232ecdr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "09d63727cc1840ee04cba8cb5cbbbb5bd42aaf88ff707f1eb45608fcf680dc7a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -178,7 +178,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "trsf3232ecdr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "trsf3232ecdr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "09d63727cc1840ee04cba8cb5cbbbb5bd42aaf88ff707f1eb45608fcf680dc7a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -225,4 +265,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}